arch/all-pc/boot/grub/netboot/3c90x.c

   1 /*
   2  * 3c90x.c -- This file implements the 3c90x driver for etherboot.  Written
   3  * by Greg Beeley, Greg.Beeley@LightSys.org.  Modified by Steve Smith,
   4  * Steve.Smith@Juno.Com
   5  *
   6  * This program Copyright (C) 1999 LightSys Technology Services, Inc.
   7  * Portions Copyright (C) 1999 Steve Smith
   8  *
   9  * This program may be re-distributed in source or binary form, modified,
  10  * sold, or copied for any purpose, provided that the above copyright message
  11  * and this text are included with all source copies or derivative works, and
  12  * provided that the above copyright message and this text are included in the
  13  * documentation of any binary-only distributions.  This program is distributed
  14  * WITHOUT ANY WARRANTY, without even the warranty of FITNESS FOR A PARTICULAR
  15  * PURPOSE or MERCHANTABILITY.  Please read the associated documentation
  16  * "3c90x.txt" before compiling and using this driver.
  17  *
  18  * --------
  19  *
  20  * Program written with the assistance of the 3com documentation for
  21  * the 3c905B-TX card, as well as with some assistance from the 3c59x
  22  * driver Donald Becker wrote for the Linux kernel, and with some assistance
  23  * from the remainder of the Etherboot distribution.
  24  *
  25  * REVISION HISTORY:
  26  *
  27  * v0.10        1-26-1998       GRB     Initial implementation.
  28  * v0.90        1-27-1998       GRB     System works.
  29  * v1.00pre1    2-11-1998       GRB     Got prom boot issue fixed.
  30  * v2.0         9-24-1999       SCS     Modified for 3c905 (from 3c905b code)
  31  *                                      Re-wrote poll and transmit for
  32  *                                      better error recovery and heavy
  33  *                                      network traffic operation
  34  *
  35  */
  36
  37 #include "etherboot.h"
  38 #include "nic.h"
  39 #include "pci.h"
  40 #include "cards.h"
  41 #include "timer.h"
  42
  43 #define XCVR_MAGIC      (0x5A00)
  44 /** any single transmission fails after 16 collisions or other errors
  45  ** this is the number of times to retry the transmission -- this should
  46  ** be plenty
  47  **/
  48 #define XMIT_RETRIES    250
  49
  50 #undef  virt_to_bus
  51 #define virt_to_bus(x)  ((unsigned long)x)
  52
  53 /*** Register definitions for the 3c905 ***/
  54 enum Registers
  55     {
  56     regPowerMgmtCtrl_w = 0x7c,        /** 905B Revision Only                 **/
  57     regUpMaxBurst_w = 0x7a,           /** 905B Revision Only                 **/
  58     regDnMaxBurst_w = 0x78,           /** 905B Revision Only                 **/
  59     regDebugControl_w = 0x74,         /** 905B Revision Only                 **/
  60     regDebugData_l = 0x70,            /** 905B Revision Only                 **/
  61     regRealTimeCnt_l = 0x40,          /** Universal                          **/
  62     regUpBurstThresh_b = 0x3e,        /** 905B Revision Only                 **/
  63     regUpPoll_b = 0x3d,               /** 905B Revision Only                 **/
  64     regUpPriorityThresh_b = 0x3c,     /** 905B Revision Only                 **/
  65     regUpListPtr_l = 0x38,            /** Universal                          **/
  66     regCountdown_w = 0x36,            /** Universal                          **/
  67     regFreeTimer_w = 0x34,            /** Universal                          **/
  68     regUpPktStatus_l = 0x30,          /** Universal with Exception, pg 130   **/
  69     regTxFreeThresh_b = 0x2f,         /** 90X Revision Only                  **/
  70     regDnPoll_b = 0x2d,               /** 905B Revision Only                 **/
  71     regDnPriorityThresh_b = 0x2c,     /** 905B Revision Only                 **/
  72     regDnBurstThresh_b = 0x2a,        /** 905B Revision Only                 **/
  73     regDnListPtr_l = 0x24,            /** Universal with Exception, pg 107   **/
  74     regDmaCtrl_l = 0x20,              /** Universal with Exception, pg 106   **/
  75                                       /**                                    **/
  76     regIntStatusAuto_w = 0x1e,        /** 905B Revision Only                 **/
  77     regTxStatus_b = 0x1b,             /** Universal with Exception, pg 113   **/
  78     regTimer_b = 0x1a,                /** Universal                          **/
  79     regTxPktId_b = 0x18,              /** 905B Revision Only                 **/
  80     regCommandIntStatus_w = 0x0e,     /** Universal (Command Variations)     **/
  81     };
  82
  83 /** following are windowed registers **/
  84 enum Registers7
  85     {
  86     regPowerMgmtEvent_7_w = 0x0c,     /** 905B Revision Only                 **/
  87     regVlanEtherType_7_w = 0x04,      /** 905B Revision Only                 **/
  88     regVlanMask_7_w = 0x00,           /** 905B Revision Only                 **/
  89     };
  90
  91 enum Registers6
  92     {
  93     regBytesXmittedOk_6_w = 0x0c,     /** Universal                          **/
  94     regBytesRcvdOk_6_w = 0x0a,        /** Universal                          **/
  95     regUpperFramesOk_6_b = 0x09,      /** Universal                          **/
  96     regFramesDeferred_6_b = 0x08,     /** Universal                          **/
  97     regFramesRecdOk_6_b = 0x07,       /** Universal with Exceptions, pg 142  **/
  98     regFramesXmittedOk_6_b = 0x06,    /** Universal                          **/
  99     regRxOverruns_6_b = 0x05,         /** Universal                          **/
 100     regLateCollisions_6_b = 0x04,     /** Universal                          **/
 101     regSingleCollisions_6_b = 0x03,   /** Universal                          **/
 102     regMultipleCollisions_6_b = 0x02, /** Universal                          **/
 103     regSqeErrors_6_b = 0x01,          /** Universal                          **/
 104     regCarrierLost_6_b = 0x00,        /** Universal                          **/
 105     };
 106
 107 enum Registers5
 108     {
 109     regIndicationEnable_5_w = 0x0c,   /** Universal                          **/
 110     regInterruptEnable_5_w = 0x0a,    /** Universal                          **/
 111     regTxReclaimThresh_5_b = 0x09,    /** 905B Revision Only                 **/
 112     regRxFilter_5_b = 0x08,           /** Universal                          **/
 113     regRxEarlyThresh_5_w = 0x06,      /** Universal                          **/
 114     regTxStartThresh_5_w = 0x00,      /** Universal                          **/
 115     };
 116
 117 enum Registers4
 118     {
 119     regUpperBytesOk_4_b = 0x0d,       /** Universal                          **/
 120     regBadSSD_4_b = 0x0c,             /** Universal                          **/
 121     regMediaStatus_4_w = 0x0a,        /** Universal with Exceptions, pg 201  **/
 122     regPhysicalMgmt_4_w = 0x08,       /** Universal                          **/
 123     regNetworkDiagnostic_4_w = 0x06,  /** Universal with Exceptions, pg 203  **/
 124     regFifoDiagnostic_4_w = 0x04,     /** Universal with Exceptions, pg 196  **/
 125     regVcoDiagnostic_4_w = 0x02,      /** Undocumented?                      **/
 126     };
 127
 128 enum Registers3
 129     {
 130     regTxFree_3_w = 0x0c,             /** Universal                          **/
 131     regRxFree_3_w = 0x0a,             /** Universal with Exceptions, pg 125  **/
 132     regResetMediaOptions_3_w = 0x08,  /** Media Options on B Revision,       **/
 133                                       /** Reset Options on Non-B Revision    **/
 134     regMacControl_3_w = 0x06,         /** Universal with Exceptions, pg 199  **/
 135     regMaxPktSize_3_w = 0x04,         /** 905B Revision Only                 **/
 136     regInternalConfig_3_l = 0x00,     /** Universal, different bit           **/
 137                                       /** definitions, pg 59                 **/
 138     };
 139
 140 enum Registers2
 141     {
 142     regResetOptions_2_w = 0x0c,       /** 905B Revision Only                 **/
 143     regStationMask_2_3w = 0x06,       /** Universal with Exceptions, pg 127  **/
 144     regStationAddress_2_3w = 0x00,    /** Universal with Exceptions, pg 127  **/
 145     };
 146
 147 enum Registers1
 148     {
 149     regRxStatus_1_w = 0x0a,           /** 90X Revision Only, Pg 126          **/
 150     };
 151
 152 enum Registers0
 153     {
 154     regEepromData_0_w = 0x0c,         /** Universal                          **/
 155     regEepromCommand_0_w = 0x0a,      /** Universal                          **/
 156     regBiosRomData_0_b = 0x08,        /** 905B Revision Only                 **/
 157     regBiosRomAddr_0_l = 0x04,        /** 905B Revision Only                 **/
 158     };
 159
 160
 161 /*** The names for the eight register windows ***/
 162 enum Windows
 163     {
 164     winPowerVlan7 = 0x07,
 165     winStatistics6 = 0x06,
 166     winTxRxControl5 = 0x05,
 167     winDiagnostics4 = 0x04,
 168     winTxRxOptions3 = 0x03,
 169     winAddressing2 = 0x02,
 170     winUnused1 = 0x01,
 171     winEepromBios0 = 0x00,
 172     };
 173
 174
 175 /*** Command definitions for the 3c90X ***/
 176 enum Commands
 177     {
 178     cmdGlobalReset = 0x00,             /** Universal with Exceptions, pg 151 **/
 179     cmdSelectRegisterWindow = 0x01,    /** Universal                         **/
 180     cmdEnableDcConverter = 0x02,       /**                                   **/
 181     cmdRxDisable = 0x03,               /**                                   **/
 182     cmdRxEnable = 0x04,                /** Universal                         **/
 183     cmdRxReset = 0x05,                 /** Universal                         **/
 184     cmdStallCtl = 0x06,                /** Universal                         **/
 185     cmdTxEnable = 0x09,                /** Universal                         **/
 186     cmdTxDisable = 0x0A,               /**                                   **/
 187     cmdTxReset = 0x0B,                 /** Universal                         **/
 188     cmdRequestInterrupt = 0x0C,        /**                                   **/
 189     cmdAcknowledgeInterrupt = 0x0D,    /** Universal                         **/
 190     cmdSetInterruptEnable = 0x0E,      /** Universal                         **/
 191     cmdSetIndicationEnable = 0x0F,     /** Universal                         **/
 192     cmdSetRxFilter = 0x10,             /** Universal                         **/
 193     cmdSetRxEarlyThresh = 0x11,        /**                                   **/
 194     cmdSetTxStartThresh = 0x13,        /**                                   **/
 195     cmdStatisticsEnable = 0x15,        /**                                   **/
 196     cmdStatisticsDisable = 0x16,       /**                                   **/
 197     cmdDisableDcConverter = 0x17,      /**                                   **/
 198     cmdSetTxReclaimThresh = 0x18,      /**                                   **/
 199     cmdSetHashFilterBit = 0x19,        /**                                   **/
 200     };
 201
 202
 203 /*** Values for int status register bitmask **/
 204 #define INT_INTERRUPTLATCH      (1<<0)
 205 #define INT_HOSTERROR           (1<<1)
 206 #define INT_TXCOMPLETE          (1<<2)
 207 #define INT_RXCOMPLETE          (1<<4)
 208 #define INT_RXEARLY             (1<<5)
 209 #define INT_INTREQUESTED        (1<<6)
 210 #define INT_UPDATESTATS         (1<<7)
 211 #define INT_LINKEVENT           (1<<8)
 212 #define INT_DNCOMPLETE          (1<<9)
 213 #define INT_UPCOMPLETE          (1<<10)
 214 #define INT_CMDINPROGRESS       (1<<12)
 215 #define INT_WINDOWNUMBER        (7<<13)
 216
 217
 218 /*** TX descriptor ***/
 219 typedef struct
 220     {
 221     unsigned int        DnNextPtr;
 222     unsigned int        FrameStartHeader;
 223     unsigned int        HdrAddr;
 224     unsigned int        HdrLength;
 225     unsigned int        DataAddr;
 226     unsigned int        DataLength;
 227     }
 228     TXD;
 229
 230 /*** RX descriptor ***/
 231 typedef struct
 232     {
 233     unsigned int        UpNextPtr;
 234     unsigned int        UpPktStatus;
 235     unsigned int        DataAddr;
 236     unsigned int        DataLength;
 237     }
 238     RXD;
 239
 240 /*** Global variables ***/
 241 static struct
 242     {
 243     unsigned char       isBrev;
 244     unsigned char       CurrentWindow;
 245     unsigned int        IOAddr;
 246     unsigned char       HWAddr[ETH_ALEN];
 247     TXD                 TransmitDPD;
 248     RXD                 ReceiveUPD;
 249     }
 250     INF_3C90X;
 251
 252
 253 /*** a3c90x_internal_IssueCommand: sends a command to the 3c90x card
 254  ***/
 255 static int
 256 a3c90x_internal_IssueCommand(int ioaddr, int cmd, int param)
 257     {
 258     unsigned int val;
 259
 260         /** Build the cmd. **/
 261         val = cmd;
 262         val <<= 11;
 263         val |= param;
 264
 265         /** Send the cmd to the cmd register **/
 266         outw(val, ioaddr + regCommandIntStatus_w);
 267
 268         /** Wait for the cmd to complete, if necessary **/
 269         while (inw(ioaddr + regCommandIntStatus_w) & INT_CMDINPROGRESS);
 270
 271     return 0;
 272     }
 273
 274
 275 /*** a3c90x_internal_SetWindow: selects a register window set.
 276  ***/
 277 static int
 278 a3c90x_internal_SetWindow(int ioaddr, int window)
 279     {
 280
 281         /** Window already as set? **/
 282         if (INF_3C90X.CurrentWindow == window) return 0;
 283
 284         /** Issue the window command. **/
 285         a3c90x_internal_IssueCommand(ioaddr, cmdSelectRegisterWindow, window);
 286         INF_3C90X.CurrentWindow = window;
 287
 288     return 0;
 289     }
 290
 291
 292 /*** a3c90x_internal_ReadEeprom - read data from the serial eeprom.
 293  ***/
 294 static unsigned short
 295 a3c90x_internal_ReadEeprom(int ioaddr, int address)
 296     {
 297     unsigned short val;
 298
 299         /** Select correct window **/
 300         a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winEepromBios0);
 301
 302         /** Make sure the eeprom isn't busy **/
 303         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 304
 305         /** Read the value. **/
 306         outw(address + ((0x02)<<6), ioaddr + regEepromCommand_0_w);
 307         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 308         val = inw(ioaddr + regEepromData_0_w);
 309
 310     return val;
 311     }
 312
 313
 314 /*** a3c90x_internal_WriteEepromWord - write a physical word of
 315  *** data to the onboard serial eeprom (not the BIOS prom, but the
 316  *** nvram in the card that stores, among other things, the MAC
 317  *** address).
 318  ***/
 319 static int
 320 a3c90x_internal_WriteEepromWord(int ioaddr, int address, unsigned short value)
 321     {
 322         /** Select register window **/
 323         a3c90x_internal_SetWindow(ioaddr, winEepromBios0);
 324
 325         /** Verify Eeprom not busy **/
 326         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 327
 328         /** Issue WriteEnable, and wait for completion. **/
 329         outw(0x30, ioaddr + regEepromCommand_0_w);
 330         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 331
 332         /** Issue EraseRegister, and wait for completion. **/
 333         outw(address + ((0x03)<<6), ioaddr + regEepromCommand_0_w);
 334         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 335
 336         /** Send the new data to the eeprom, and wait for completion. **/
 337         outw(value, ioaddr + regEepromData_0_w);
 338         outw(0x30, ioaddr + regEepromCommand_0_w);
 339         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 340
 341         /** Burn the new data into the eeprom, and wait for completion. **/
 342         outw(address + ((0x01)<<6), ioaddr + regEepromCommand_0_w);
 343         while((1<<15) & inw(ioaddr + regEepromCommand_0_w));
 344
 345     return 0;
 346     }
 347
 348
 349 /*** a3c90x_internal_WriteEeprom - write data to the serial eeprom,
 350  *** and re-compute the eeprom checksum.
 351  ***/
 352 static int
 353 a3c90x_internal_WriteEeprom(int ioaddr, int address, unsigned short value)
 354     {
 355     int cksum = 0,v;
 356     int i;
 357     int maxAddress, cksumAddress;
 358
 359         if (INF_3C90X.isBrev)
 360             {
 361             maxAddress=0x1f;
 362             cksumAddress=0x20;
 363             }
 364         else
 365             {
 366             maxAddress=0x16;
 367             cksumAddress=0x17;
 368             }
 369
 370         /** Write the value. **/
 371         if (a3c90x_internal_WriteEepromWord(ioaddr, address, value) == -1)
 372             return -1;
 373
 374         /** Recompute the checksum. **/
 375         for(i=0;i<=maxAddress;i++)
 376             {
 377             v = a3c90x_internal_ReadEeprom(ioaddr, i);
 378             cksum ^= (v & 0xFF);
 379             cksum ^= ((v>>8) & 0xFF);
 380             }
 381         /** Write the checksum to the location in the eeprom **/
 382         if (a3c90x_internal_WriteEepromWord(ioaddr, cksumAddress, cksum) == -1)
 383             return -1;
 384
 385     return 0;
 386     }
 387
 388
 389
 390 /*** a3c90x_reset: exported function that resets the card to its default
 391  *** state.  This is so the Linux driver can re-set the card up the way
 392  *** it wants to.  If CFG_3C90X_PRESERVE_XCVR is defined, then the reset will
 393  *** not alter the selected transceiver that we used to download the boot
 394  *** image.
 395  ***/
 396 static void
 397 a3c90x_reset(struct nic *nic)
 398     {
 399     int cfg;
 400
 401 #ifdef  CFG_3C90X_PRESERVE_XCVR
 402     /** Read the current InternalConfig value. **/
 403     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3);
 404     cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l);
 405 #endif
 406
 407     /** Send the reset command to the card **/
 408     printf("Issuing RESET:\n");
 409     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdGlobalReset, 0);
 410
 411     /** wait for reset command to complete **/
 412     while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS);
 413
 414     /** global reset command resets station mask, non-B revision cards
 415      ** require explicit reset of values
 416      **/
 417     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2);
 418     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+0);
 419     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2);
 420     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4);
 421
 422 #ifdef  CFG_3C90X_PRESERVE_XCVR
 423     /** Re-set the original InternalConfig value from before reset **/
 424     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3);
 425     outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l);
 426
 427     /** enable DC converter for 10-Base-T **/
 428     if ((cfg&0x0300) == 0x0300)
 429         {
 430         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdEnableDcConverter, 0);
 431         }
 432 #endif
 433
 434     /** Issue transmit reset, wait for command completion **/
 435     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxReset, 0);
 436     while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS)
 437         ;
 438     if (! INF_3C90X.isBrev)
 439         outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b);
 440     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0);
 441
 442     /**
 443      ** reset of the receiver on B-revision cards re-negotiates the link
 444      ** takes several seconds (a computer eternity)
 445      **/
 446     if (INF_3C90X.isBrev)
 447         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x04);
 448     else
 449         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x00);
 450     while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS);
 451         ;
 452     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0);
 453
 454     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr,
 455                                  cmdSetInterruptEnable, 0);
 456     /** enable rxComplete and txComplete **/
 457     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr,
 458                                  cmdSetIndicationEnable, 0x0014);
 459     /** acknowledge any pending status flags **/
 460     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr,
 461                                  cmdAcknowledgeInterrupt, 0x661);
 462
 463     return;
 464     }
 465
 466
 467
 468 /*** a3c90x_transmit: exported function that transmits a packet.  Does not
 469  *** return any particular status.  Parameters are:
 470  *** d[6] - destination address, ethernet;
 471  *** t - protocol type (ARP, IP, etc);
 472  *** s - size of the non-header part of the packet that needs transmitted;
 473  *** p - the pointer to the packet data itself.
 474  ***/
 475 static void
 476 a3c90x_transmit(struct nic *nic, const char *d, unsigned int t,
 477                 unsigned int s, const char *p)
 478     {
 479
 480     struct eth_hdr
 481         {
 482         unsigned char dst_addr[ETH_ALEN];
 483         unsigned char src_addr[ETH_ALEN];
 484         unsigned short type;
 485         } hdr;
 486
 487     unsigned char status;
 488     unsigned i, retries;
 489
 490     for (retries=0; retries < XMIT_RETRIES ; retries++)
 491         {
 492         /** Stall the download engine **/
 493         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdStallCtl, 2);
 494
 495         /** Make sure the card is not waiting on us **/
 496         inw(INF_3C90X.IOAddr + regCommandIntStatus_w);
 497         inw(INF_3C90X.IOAddr + regCommandIntStatus_w);
 498
 499         while (inw(INF_3C90X.IOAddr+regCommandIntStatus_w) &
 500                INT_CMDINPROGRESS)
 501             ;
 502
 503         /** Set the ethernet packet type **/
 504         hdr.type = htons(t);
 505
 506         /** Copy the destination address **/
 507         memcpy(hdr.dst_addr, d, ETH_ALEN);
 508
 509         /** Copy our MAC address **/
 510         memcpy(hdr.src_addr, INF_3C90X.HWAddr, ETH_ALEN);
 511
 512         /** Setup the DPD (download descriptor) **/
 513         INF_3C90X.TransmitDPD.DnNextPtr = 0;
 514         /** set notification for transmission completion (bit 15) **/
 515         INF_3C90X.TransmitDPD.FrameStartHeader = (s + sizeof(hdr)) | 0x8000;
 516         INF_3C90X.TransmitDPD.HdrAddr = virt_to_bus(&hdr);
 517         INF_3C90X.TransmitDPD.HdrLength = sizeof(hdr);
 518         INF_3C90X.TransmitDPD.DataAddr = virt_to_bus(p);
 519         INF_3C90X.TransmitDPD.DataLength = s + (1<<31);
 520
 521         /** Send the packet **/
 522         outl(virt_to_bus(&(INF_3C90X.TransmitDPD)),
 523              INF_3C90X.IOAddr + regDnListPtr_l);
 524
 525         /** End Stall and Wait for upload to complete. **/
 526         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdStallCtl, 3);
 527         while(inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0)
 528             ;
 529
 530         /** Wait for NIC Transmit to Complete **/
 531         load_timer2(10*TICKS_PER_MS);   /* Give it 10 ms */
 532         while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0004) &&
 533                 timer2_running())
 534                 ;
 535
 536         if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0004))
 537             {
 538             printf("3C90X: Tx Timeout\n");
 539             continue;
 540             }
 541
 542         status = inb(INF_3C90X.IOAddr + regTxStatus_b);
 543
 544         /** acknowledge transmit interrupt by writing status **/
 545         outb(0x00, INF_3C90X.IOAddr + regTxStatus_b);
 546
 547         /** successful completion (sans "interrupt Requested" bit) **/
 548         if ((status & 0xbf) == 0x80)
 549             return;
 550
 551            printf("3C90X: Status (%hhX)\n", status);
 552         /** check error codes **/
 553         if (status & 0x02)
 554             {
 555             printf("3C90X: Tx Reclaim Error (%hhX)\n", status);
 556             a3c90x_reset(NULL);
 557             }
 558         else if (status & 0x04)
 559             {
 560             printf("3C90X: Tx Status Overflow (%hhX)\n", status);
 561             for (i=0; i<32; i++)
 562                 outb(0x00, INF_3C90X.IOAddr + regTxStatus_b);
 563             /** must re-enable after max collisions before re-issuing tx **/
 564             a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0);
 565             }
 566         else if (status & 0x08)
 567             {
 568             printf("3C90X: Tx Max Collisions (%hhX)\n", status);
 569             /** must re-enable after max collisions before re-issuing tx **/
 570             a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0);
 571             }
 572         else if (status & 0x10)
 573             {
 574             printf("3C90X: Tx Underrun (%hhX)\n", status);
 575             a3c90x_reset(NULL);
 576             }
 577         else if (status & 0x20)
 578             {
 579             printf("3C90X: Tx Jabber (%hhX)\n", status);
 580             a3c90x_reset(NULL);
 581             }
 582         else if ((status & 0x80) != 0x80)
 583             {
 584             printf("3C90X: Internal Error - Incomplete Transmission (%hhX)\n",
 585                    status);
 586             a3c90x_reset(NULL);
 587             }
 588         }
 589
 590     /** failed after RETRY attempts **/
 591     printf("Failed to send after %d retries\n", retries);
 592     return;
 593
 594     }
 595
 596
 597
 598 /*** a3c90x_poll: exported routine that waits for a certain length of time
 599  *** for a packet, and if it sees none, returns 0.  This routine should
 600  *** copy the packet to nic->packet if it gets a packet and set the size
 601  *** in nic->packetlen.  Return 1 if a packet was found.
 602  ***/
 603 static int
 604 a3c90x_poll(struct nic *nic)
 605     {
 606     int i, errcode;
 607
 608     if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0010))
 609         {
 610         return 0;
 611         }
 612
 613     /** we don't need to acknowledge rxComplete -- the upload engine
 614      ** does it for us.
 615      **/
 616
 617     /** Build the up-load descriptor **/
 618     INF_3C90X.ReceiveUPD.UpNextPtr = 0;
 619     INF_3C90X.ReceiveUPD.UpPktStatus = 0;
 620     INF_3C90X.ReceiveUPD.DataAddr = virt_to_bus(nic->packet);
 621     INF_3C90X.ReceiveUPD.DataLength = 1536 + (1<<31);
 622
 623     /** Submit the upload descriptor to the NIC **/
 624     outl(virt_to_bus(&(INF_3C90X.ReceiveUPD)),
 625          INF_3C90X.IOAddr + regUpListPtr_l);
 626
 627     /** Wait for upload completion (upComplete(15) or upError (14)) **/
 628     for(i=0;i<40000;i++);
 629     while((INF_3C90X.ReceiveUPD.UpPktStatus & ((1<<14) | (1<<15))) == 0)
 630         for(i=0;i<40000;i++);
 631
 632     /** Check for Error (else we have good packet) **/
 633     if (INF_3C90X.ReceiveUPD.UpPktStatus & (1<<14))
 634         {
 635         errcode = INF_3C90X.ReceiveUPD.UpPktStatus;
 636         if (errcode & (1<<16))
 637             printf("3C90X: Rx Overrun (%hX)\n",errcode>>16);
 638         else if (errcode & (1<<17))
 639             printf("3C90X: Runt Frame (%hX)\n",errcode>>16);
 640         else if (errcode & (1<<18))
 641             printf("3C90X: Alignment Error (%hX)\n",errcode>>16);
 642         else if (errcode & (1<<19))
 643             printf("3C90X: CRC Error (%hX)\n",errcode>>16);
 644         else if (errcode & (1<<20))
 645             printf("3C90X: Oversized Frame (%hX)\n",errcode>>16);
 646         else
 647             printf("3C90X: Packet error (%hX)\n",errcode>>16);
 648         return 0;
 649         }
 650
 651     /** Ok, got packet.  Set length in nic->packetlen. **/
 652     nic->packetlen = (INF_3C90X.ReceiveUPD.UpPktStatus & 0x1FFF);
 653
 654     return 1;
 655     }
 656
 657
 658
 659 /*** a3c90x_disable: exported routine to disable the card.  What's this for?
 660  *** the eepro100.c driver didn't have one, so I just left this one empty too.
 661  *** Ideas anyone?
 662  *** Must turn off receiver at least so stray packets will not corrupt memory
 663  *** [Ken]
 664  ***/
 665 static void
 666 a3c90x_disable(struct nic *nic)
 667     {
 668         /* Disable the receiver and transmitter. */
 669         outw(cmdRxDisable, INF_3C90X.IOAddr + regCommandIntStatus_w);
 670         outw(cmdTxDisable, INF_3C90X.IOAddr + regCommandIntStatus_w);
 671     }
 672
 673
 674
 675 /*** a3c90x_probe: exported routine to probe for the 3c905 card and perform
 676  *** initialization.  If this routine is called, the pci functions did find the
 677  *** card.  We just have to init it here.
 678  ***/
 679 struct nic*
 680 a3c90x_probe(struct nic *nic, unsigned short *probeaddrs, struct pci_device *pci)
 681     {
 682     int i, c;
 683     unsigned short eeprom[0x21];
 684     unsigned int cfg;
 685     unsigned int mopt;
 686     unsigned short linktype;
 687
 688     if (probeaddrs == 0 || probeaddrs[0] == 0)
 689           return 0;
 690
 691     adjust_pci_device(pci);
 692
 693     INF_3C90X.IOAddr = probeaddrs[0] & ~3;
 694     INF_3C90X.CurrentWindow = 255;
 695     switch (a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, 0x03))
 696         {
 697         case 0x9000: /** 10 Base TPO             **/
 698         case 0x9001: /** 10/100 T4               **/
 699         case 0x9050: /** 10/100 TPO              **/
 700         case 0x9051: /** 10 Base Combo           **/
 701                 INF_3C90X.isBrev = 0;
 702                 break;
 703
 704         case 0x9004: /** 10 Base TPO             **/
 705         case 0x9005: /** 10 Base Combo           **/
 706         case 0x9006: /** 10 Base TPO and Base2   **/
 707         case 0x900A: /** 10 Base FL              **/
 708         case 0x9055: /** 10/100 TPO              **/
 709         case 0x9056: /** 10/100 T4               **/
 710         case 0x905A: /** 10 Base FX              **/
 711         default:
 712                 INF_3C90X.isBrev = 1;
 713                 break;
 714         }
 715
 716     /** Load the EEPROM contents **/
 717     if (INF_3C90X.isBrev)
 718         {
 719         for(i=0;i<=0x20;i++)
 720             {
 721             eeprom[i] = a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, i);
 722             }
 723
 724 #ifdef  CFG_3C90X_BOOTROM_FIX
 725         /** Set xcvrSelect in InternalConfig in eeprom. **/
 726         /* only necessary for 3c905b revision cards with boot PROM bug!!! */
 727         a3c90x_internal_WriteEeprom(INF_3C90X.IOAddr, 0x13, 0x0160);
 728 #endif
 729
 730 #ifdef  CFG_3C90X_XCVR
 731         if (CFG_3C90X_XCVR == 255)
 732             {
 733             /** Clear the LanWorks register **/
 734             a3c90x_internal_WriteEeprom(INF_3C90X.IOAddr, 0x16, 0);
 735             }
 736         else
 737             {
 738             /** Set the selected permanent-xcvrSelect in the
 739              ** LanWorks register
 740              **/
 741             a3c90x_internal_WriteEeprom(INF_3C90X.IOAddr, 0x16,
 742                             XCVR_MAGIC + ((CFG_3C90X_XCVR) & 0x000F));
 743             }
 744 #endif
 745         }
 746     else
 747         {
 748         for(i=0;i<=0x17;i++)
 749             {
 750             eeprom[i] = a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, i);
 751             }
 752         }
 753
 754     /** Print identification message **/
 755     printf("\n\n3C90X Driver 2.00 "
 756            "Copyright 1999 LightSys Technology Services, Inc.\n"
 757            "Portions Copyright 1999 Steve Smith\n");
 758     printf("Provided with ABSOLUTELY NO WARRANTY.\n");
 759     printf("-------------------------------------------------------"
 760            "------------------------\n");
 761
 762     /** Retrieve the Hardware address and print it on the screen. **/
 763     INF_3C90X.HWAddr[0] = eeprom[0]>>8;
 764     INF_3C90X.HWAddr[1] = eeprom[0]&0xFF;
 765     INF_3C90X.HWAddr[2] = eeprom[1]>>8;
 766     INF_3C90X.HWAddr[3] = eeprom[1]&0xFF;
 767     INF_3C90X.HWAddr[4] = eeprom[2]>>8;
 768     INF_3C90X.HWAddr[5] = eeprom[2]&0xFF;
 769     printf("MAC Address = %!\n", INF_3C90X.HWAddr);
 770
 771     /** Program the MAC address into the station address registers **/
 772     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2);
 773     outw(htons(eeprom[0]), INF_3C90X.IOAddr + regStationAddress_2_3w);
 774     outw(htons(eeprom[1]), INF_3C90X.IOAddr + regStationAddress_2_3w+2);
 775     outw(htons(eeprom[2]), INF_3C90X.IOAddr + regStationAddress_2_3w+4);
 776     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+0);
 777     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2);
 778     outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4);
 779
 780     /** Fill in our entry in the etherboot arp table **/
 781     for(i=0;i<ETH_ALEN;i++)
 782         nic->node_addr[i] = (eeprom[i/2] >> (8*((i&1)^1))) & 0xff;
 783
 784     /** Read the media options register, print a message and set default
 785      ** xcvr.
 786      **
 787      ** Uses Media Option command on B revision, Reset Option on non-B
 788      ** revision cards -- same register address
 789      **/
 790     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3);
 791     mopt = inw(INF_3C90X.IOAddr + regResetMediaOptions_3_w);
 792
 793     /** mask out VCO bit that is defined as 10baseFL bit on B-rev cards **/
 794     if (! INF_3C90X.isBrev)
 795         {
 796         mopt &= 0x7F;
 797         }
 798
 799     printf("Connectors present: ");
 800     c = 0;
 801     linktype = 0x0008;
 802     if (mopt & 0x01)
 803         {
 804         printf("%s100Base-T4",(c++)?", ":"");
 805         linktype = 0x0006;
 806         }
 807     if (mopt & 0x04)
 808         {
 809         printf("%s100Base-FX",(c++)?", ":"");
 810         linktype = 0x0005;
 811         }
 812     if (mopt & 0x10)
 813         {
 814         printf("%s10Base-2",(c++)?", ":"");
 815         linktype = 0x0003;
 816         }
 817     if (mopt & 0x20)
 818         {
 819         printf("%sAUI",(c++)?", ":"");
 820         linktype = 0x0001;
 821         }
 822     if (mopt & 0x40)
 823         {
 824         printf("%sMII",(c++)?", ":"");
 825         linktype = 0x0006;
 826         }
 827     if ((mopt & 0xA) == 0xA)
 828         {
 829         printf("%s10Base-T / 100Base-TX",(c++)?", ":"");
 830         linktype = 0x0008;
 831         }
 832     else if ((mopt & 0xA) == 0x2)
 833         {
 834         printf("%s100Base-TX",(c++)?", ":"");
 835         linktype = 0x0008;
 836         }
 837     else if ((mopt & 0xA) == 0x8)
 838         {
 839         printf("%s10Base-T",(c++)?", ":"");
 840         linktype = 0x0008;
 841         }
 842     printf(".\n");
 843
 844     /** Determine transceiver type to use, depending on value stored in
 845      ** eeprom 0x16
 846      **/
 847     if (INF_3C90X.isBrev)
 848         {
 849         if ((eeprom[0x16] & 0xFF00) == XCVR_MAGIC)
 850             {
 851             /** User-defined **/
 852             linktype = eeprom[0x16] & 0x000F;
 853             }
 854         }
 855     else
 856         {
 857 #ifdef  CFG_3C90X_XCVR
 858             if (CFG_3C90X_XCVR != 255)
 859                 linktype = CFG_3C90X_XCVR;
 860 #endif  /* CFG_3C90X_XCVR */
 861
 862             /** I don't know what MII MAC only mode is!!! **/
 863             if (linktype == 0x0009)
 864                 {
 865                 if (INF_3C90X.isBrev)
 866                         printf("WARNING: MII External MAC Mode only supported on B-revision "
 867                                "cards!!!!\nFalling Back to MII Mode\n");
 868                 linktype = 0x0006;
 869                 }
 870         }
 871
 872     /** enable DC converter for 10-Base-T **/
 873     if (linktype == 0x0003)
 874         {
 875         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdEnableDcConverter, 0);
 876         }
 877
 878     /** Set the link to the type we just determined. **/
 879     a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3);
 880     cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l);
 881     cfg &= ~(0xF<<20);
 882     cfg |= (linktype<<20);
 883     outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l);
 884
 885     /** Now that we set the xcvr type, reset the Tx and Rx, re-enable. **/
 886     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxReset, 0x00);
 887     while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS)
 888         ;
 889
 890     if (!INF_3C90X.isBrev)
 891         outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b);
 892
 893     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0);
 894
 895     /**
 896      ** reset of the receiver on B-revision cards re-negotiates the link
 897      ** takes several seconds (a computer eternity)
 898      **/
 899     if (INF_3C90X.isBrev)
 900         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x04);
 901     else
 902         a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x00);
 903     while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS)
 904         ;
 905
 906     /** Set the RX filter = receive only individual pkts & bcast. **/
 907     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x04);
 908     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0);
 909
 910
 911     /**
 912      ** set Indication and Interrupt flags , acknowledge any IRQ's
 913      **/
 914     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0);
 915     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr,
 916                                  cmdSetIndicationEnable, 0x0014);
 917     a3c90x_internal_IssueCommand(INF_3C90X.IOAddr,
 918                                  cmdAcknowledgeInterrupt, 0x661);
 919
 920     /** Set our exported functions **/
 921     nic->reset    = a3c90x_reset;
 922     nic->poll     = a3c90x_poll;
 923     nic->transmit = a3c90x_transmit;
 924     nic->disable  = a3c90x_disable;
 925
 926     return nic;
 927     }
 928
 929