From 419c128d31275649a87287f3d16f7e59a49395b0 Mon Sep 17 00:00:00 2001
From: Martin Rakovec <marx@marx-laptop.(none)>
Date: Fri, 15 May 2009 15:47:38 +0200
Subject: [PATCH] SpejblARM bord can be now programmed via USB with FTDI(FT232)

---
 board/spejblarm/config.spejbl | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/board/spejblarm/config.spejbl b/board/spejblarm/config.spejbl
index 9bebcc4..37940d3 100644
--- a/board/spejblarm/config.spejbl
+++ b/board/spejblarm/config.spejbl
@@ -13,13 +13,17 @@ DEBUG ?= -g
 OPTIMIZE ?= -O2
 
 LPC_BAUD = 38400
-TOLPC = $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin-utils/tolpc --baud $(LPC_BAUD) --sdev /dev/ttyS0
-LOAD_CMD-ramisp = $(TOLPC)  -v -q 7372 -L -f 
-LOAD_CMD-mpram = $(TOLPC)  -v -q 7372 -L -f 
+SDEV = /dev/ttyUSB0
+XTALFREQ = 10000
+TOLPC = $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin-utils/tolpc --baud $(LPC_BAUD) --sdev $(SDEV)
+#LOAD_CMD-ramisp = $(TOLPC)  -v -q $(XTALFREQ) -L -f 
+LOAD_CMD-ram = $(TOLPC) -v -q $(XTALFREQ) -L -f
+LOAD_CMD-mpram = $(TOLPC)  -v -q $(XTALFREQ) -L -f 
+LOAD_CMD-flash = load() { HEX=$(LOCAL_BUILD_DIR)/$$(basename $$1).hex; $(CROSS_COMPILE)objcopy -O ihex $$1 $$HEX; $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin-utils/lpc21isp -control $$HEX $(SDEV) $(LPC_BAUD) $(XTALFREQ); }; load
 
 # This selects linker script
-LD_SCRIPT=lpc2119
-DEFAULT_LD_SCRIPT_VARIANT=ramisp
+LD_SCRIPT=lpc21xx
+DEFAULT_LD_SCRIPT_VARIANT= ram flash #ramisp flash
 
 #OUTPUT_FORMATS = bin hex srec
 
@@ -28,3 +32,5 @@ CONFIG_USB_BASE=
 CONFIG_USB_PDIUSB=
 CONFIG_USB_MORE=
 CONFIG_CMDPROC_TEST=n
+
+LN_HEADERS=y
-- 
2.11.4.GIT