1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
3 * This file is part of the LibreOffice project.
5 * This Source Code Form is subject to the terms of the Mozilla Public
6 * License, v. 2.0. If a copy of the MPL was not distributed with this
7 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
9 * This file incorporates work covered by the following license notice:
11 * Licensed to the Apache Software Foundation (ASF) under one or more
12 * contributor license agreements. See the NOTICE file distributed
13 * with this work for additional information regarding copyright
14 * ownership. The ASF licenses this file to you under the Apache
15 * License, Version 2.0 (the "License"); you may not use this file
16 * except in compliance with the License. You may obtain a copy of
17 * the License at http://www.apache.org/licenses/LICENSE-2.0 .
20 #ifndef INCLUDED_SVX_SVDOMEAS_HXX
21 #define INCLUDED_SVX_SVDOMEAS_HXX
23 #include <svx/svdotext.hxx>
24 #include <svx/svxdllapi.h>
25 #include <editeng/measfld.hxx>
29 struct ImpMeasurePoly
;
31 namespace sdr
{ namespace properties
{
32 class MeasureProperties
;
35 class SdrMeasureObjGeoData
: public SdrTextObjGeoData
42 SdrMeasureObjGeoData();
43 virtual ~SdrMeasureObjGeoData() override
;
46 class SVX_DLLPUBLIC SdrMeasureObj
: public SdrTextObj
49 // to allow sdr::properties::MeasureProperties access to SetTextDirty()
50 friend class sdr::properties::MeasureProperties
;
52 friend class SdrMeasureField
;
55 virtual std::unique_ptr
<sdr::contact::ViewContact
> CreateObjectSpecificViewContact() override
;
56 virtual std::unique_ptr
<sdr::properties::BaseProperties
> CreateObjectSpecificProperties() override
;
63 void ImpTakeAttr(ImpMeasureRec
& rRec
) const;
64 OUString
TakeRepresentation(SdrMeasureFieldKind eMeasureFieldKind
) const;
65 void ImpCalcGeometrics(const ImpMeasureRec
& rRec
, ImpMeasurePoly
& rPol
) const;
66 static basegfx::B2DPolyPolygon
ImpCalcXPoly(const ImpMeasurePoly
& rPol
);
67 void ImpEvalDrag(ImpMeasureRec
& rRec
, const SdrDragStat
& rDrag
) const;
68 void SetTextDirty() { bTextDirty
=true; SetTextSizeDirty(); if (!aOutRect
.IsEmpty()) { SetBoundRectDirty(); SetRectsDirty(true); } }
69 void UndirtyText() const;
71 virtual SdrObjGeoData
* NewGeoData() const override
;
72 virtual void SaveGeoData(SdrObjGeoData
& rGeo
) const override
;
73 virtual void RestGeoData(const SdrObjGeoData
& rGeo
) override
;
75 // protected destructor
76 virtual ~SdrMeasureObj() override
;
79 SdrMeasureObj(SdrModel
& rSdrModel
);
85 virtual void TakeObjInfo(SdrObjTransformInfoRec
& rInfo
) const override
;
86 virtual sal_uInt16
GetObjIdentifier() const override
;
87 virtual void TakeUnrotatedSnapRect(tools::Rectangle
& rRect
) const override
;
88 virtual SdrMeasureObj
* CloneSdrObject(SdrModel
& rTargetModel
) const override
;
90 // implemented mainly for the purposes of Clone()
91 SdrMeasureObj
& operator=(const SdrMeasureObj
& rObj
);
93 virtual OUString
TakeObjNameSingul() const override
;
94 virtual OUString
TakeObjNamePlural() const override
;
96 virtual basegfx::B2DPolyPolygon
TakeXorPoly() const override
;
97 virtual sal_uInt32
GetHdlCount() const override
;
98 virtual void AddToHdlList(SdrHdlList
& rHdlList
) const override
;
100 // special drag methods
101 virtual bool hasSpecialDrag() const override
;
102 virtual bool beginSpecialDrag(SdrDragStat
& rDrag
) const override
;
103 virtual bool applySpecialDrag(SdrDragStat
& rDrag
) override
;
104 virtual OUString
getSpecialDragComment(const SdrDragStat
& rDrag
) const override
;
106 virtual bool BegCreate(SdrDragStat
& rStat
) override
;
107 virtual bool MovCreate(SdrDragStat
& rStat
) override
;
108 virtual bool EndCreate(SdrDragStat
& rStat
, SdrCreateCmd eCmd
) override
;
109 virtual bool BckCreate(SdrDragStat
& rStat
) override
;
110 virtual void BrkCreate(SdrDragStat
& rStat
) override
;
111 virtual basegfx::B2DPolyPolygon
TakeCreatePoly(const SdrDragStat
& rDrag
) const override
;
112 virtual PointerStyle
GetCreatePointer() const override
;
114 virtual void NbcMove(const Size
& rSiz
) override
;
115 virtual void NbcResize(const Point
& rRef
, const Fraction
& xFact
, const Fraction
& yFact
) override
;
116 virtual void NbcRotate(const Point
& rRef
, long nAngle
, double sn
, double cs
) override
;
117 virtual void NbcMirror(const Point
& rRef1
, const Point
& rRef2
) override
;
118 virtual void NbcShear(const Point
& rRef
, long nAngle
, double tn
, bool bVShear
) override
;
119 virtual long GetRotateAngle() const override
;
120 virtual void RecalcSnapRect() override
;
122 virtual sal_uInt32
GetSnapPointCount() const override
;
123 virtual Point
GetSnapPoint(sal_uInt32 i
) const override
;
125 virtual bool IsPolyObj() const override
;
126 virtual sal_uInt32
GetPointCount() const override
;
127 virtual Point
GetPoint(sal_uInt32 i
) const override
;
128 virtual void NbcSetPoint(const Point
& rPnt
, sal_uInt32 i
) override
;
130 virtual SdrObject
* DoConvertToPolyObj(bool bBezier
, bool bAddText
) const override
;
132 virtual bool BegTextEdit(SdrOutliner
& rOutl
) override
;
133 virtual const Size
& GetTextSize() const override
;
134 virtual void TakeTextRect( SdrOutliner
& rOutliner
, tools::Rectangle
& rTextRect
, bool bNoEditText
,
135 tools::Rectangle
* pAnchorRect
, bool bLineWidth
= true ) const override
;
136 virtual void TakeTextAnchorRect(tools::Rectangle
& rAnchorRect
) const override
;
137 virtual void TakeTextEditArea(Size
* pPaperMin
, Size
* pPaperMax
, tools::Rectangle
* pViewInit
, tools::Rectangle
* pViewMin
) const override
;
138 virtual EEAnchorMode
GetOutlinerViewAnchorMode() const override
;
139 virtual void NbcSetOutlinerParaObject(std::unique_ptr
<OutlinerParaObject
> pTextObject
) override
;
140 virtual OutlinerParaObject
* GetOutlinerParaObject() const override
;
142 virtual bool CalcFieldValue(const SvxFieldItem
& rField
, sal_Int32 nPara
, sal_uInt16 nPos
,
143 bool bEdit
, boost::optional
<Color
>& rpTxtColor
, boost::optional
<Color
>& rpFldColor
, OUString
& rRet
) const override
;
146 virtual bool TRGetBaseGeometry(basegfx::B2DHomMatrix
& rMatrix
, basegfx::B2DPolyPolygon
& rPolyPolygon
) const override
;
147 virtual void TRSetBaseGeometry(const basegfx::B2DHomMatrix
& rMatrix
, const basegfx::B2DPolyPolygon
& rPolyPolygon
) override
;
152 // dragging reference point 1 to reference point 2 -> reference edge
156 // dimension line and auxiliary dimension lines: solid black hairlines
157 // arrows : 2mm x 4mm
161 // |<--------------------->|---
164 // Pt1============# Pt2-- <----reference edge (from Pt1 to Pt2)
165 // # # |___ <-excess length of the auxiliary dimension line(s)
167 // # objected to be dimensioned #
168 // #=======================#
172 // 1. Where is the text: middle, right or left (default=automatic)
173 // 2. Text above or below the line or line broken by text (default=automatic)
175 // 3. The distance from the dimension line to the reference edge (= to the dimensioned object)
176 // 4. dimension line below the reference edge (default=no))
177 // 5. excess length of the auxiliary dimension lines beyond the reference edge (2x, default=0)
178 // 6. excess length of the auxiliary dimension lines past the dimension line (default=2mm)
179 // 7. distance between the auxiliary dimension line and the reference edge
181 // Dragging: Handle Shift
183 // - reference points SolidQuadHdl only the length
184 // 1.+2. Seizing the text
185 // 3.+4. Hdl on arrow (2x) SolidQuadHdl only the Bool
186 // 5. Hdl one end point CircHdl both lengths ?
191 // - radiuses (anchor as type immediately)
195 // Connecting to a maximum of two objects
196 // -> during Copy, etc. use the respective code of the connectors?!?
197 // this probably will be pretty complicated ...
199 #endif // INCLUDED_SVX_SVDOMEAS_HXX
201 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */