LanguageTool: don't crash if REST protocol isn't set
[LibreOffice.git] / sc / inc / refdata.hxx
blob4cc296a0a3942da17203303f65e41def88c8fa7c
1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 /*
3 * This file is part of the LibreOffice project.
5 * This Source Code Form is subject to the terms of the Mozilla Public
6 * License, v. 2.0. If a copy of the MPL was not distributed with this
7 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
9 * This file incorporates work covered by the following license notice:
11 * Licensed to the Apache Software Foundation (ASF) under one or more
12 * contributor license agreements. See the NOTICE file distributed
13 * with this work for additional information regarding copyright
14 * ownership. The ASF licenses this file to you under the Apache
15 * License, Version 2.0 (the "License"); you may not use this file
16 * except in compliance with the License. You may obtain a copy of
17 * the License at http://www.apache.org/licenses/LICENSE-2.0 .
20 #pragma once
22 #include "address.hxx"
23 #include "scdllapi.h"
24 #include "calcmacros.hxx"
26 struct ScSheetLimits;
28 /// Single reference (one address) into the sheet
29 struct SC_DLLPUBLIC ScSingleRefData
31 private:
32 SCCOL mnCol;
33 SCROW mnRow;
34 SCTAB mnTab;
36 union
38 sal_uInt8 mnFlagValue;
39 struct
41 bool bColRel :1;
42 bool bColDeleted :1;
43 bool bRowRel :1;
44 bool bRowDeleted :1;
45 bool bTabRel :1;
46 bool bTabDeleted :1;
47 bool bFlag3D :1; ///< 3D-Ref
48 bool bRelName :1; ///< Reference derived from RangeName with relative values
49 } Flags;
52 public:
53 /// No default ctor, because used in ScRawToken union, set InitFlags!
54 void InitFlags() { mnFlagValue = 0; } ///< all FALSE
55 /// InitAddress: InitFlags and set address
56 void InitAddress( const ScAddress& rAdr );
57 void InitAddress( SCCOL nCol, SCROW nRow, SCTAB nTab );
58 /// InitAddressRel: InitFlags and set address, everything relative to rPos
59 void InitAddressRel( const ScDocument& rDoc, const ScAddress& rAdr, const ScAddress& rPos );
60 /// InitFlags and set address, relative to rPos if rRef says so.
61 void InitFromRefAddress( const ScDocument& rDoc, const ScRefAddress& rRef, const ScAddress& rPos );
62 sal_uInt8 FlagValue() const { return mnFlagValue;}
64 void SetColRel( bool bVal ) { Flags.bColRel = bVal; }
65 bool IsColRel() const { return Flags.bColRel; }
66 void SetRowRel( bool bVal ) { Flags.bRowRel = bVal; }
67 bool IsRowRel() const { return Flags.bRowRel; }
68 void SetTabRel( bool bVal ) { Flags.bTabRel = bVal; }
69 bool IsTabRel() const { return Flags.bTabRel; }
71 void SetAbsCol( SCCOL nVal );
72 void SetRelCol( SCCOL nVal );
73 void IncCol( SCCOL nInc );
74 void SetAbsRow( SCROW nVal );
75 void SetRelRow( SCROW nVal );
76 void IncRow( SCROW nInc );
77 void SetAbsTab( SCTAB nVal );
78 void SetRelTab( SCTAB nVal );
79 void IncTab( SCTAB nInc );
81 void SetColDeleted( bool bVal );
82 bool IsColDeleted() const { return Flags.bColDeleted;}
83 void SetRowDeleted( bool bVal );
84 bool IsRowDeleted() const { return Flags.bRowDeleted;}
85 void SetTabDeleted( bool bVal );
86 bool IsTabDeleted() const { return Flags.bTabDeleted;}
87 bool IsDeleted() const;
89 void SetFlag3D( bool bVal ) { Flags.bFlag3D = bVal; }
90 bool IsFlag3D() const { return Flags.bFlag3D; }
91 void SetRelName( bool bVal ) { Flags.bRelName = bVal; }
92 bool IsRelName() const { return Flags.bRelName; }
94 bool Valid(const ScDocument& rDoc) const;
95 bool ColValid(const ScDocument& rDoc) const;
96 bool RowValid(const ScDocument& rDoc) const;
97 bool TabValid() const;
98 /** In external references nTab is -1 if the external document was not
99 loaded but the sheet was cached, or >=0 if the external document was
100 loaded. */
101 bool ValidExternal(const ScDocument& rDoc) const;
103 ScAddress toAbs( const ScSheetLimits& rLimits, const ScAddress& rPos ) const;
104 ScAddress toAbs( const ScDocument& rDoc, const ScAddress& rPos ) const;
105 void SetAddress( const ScSheetLimits& rLimits, const ScAddress& rAddr, const ScAddress& rPos );
106 SCROW Row() const;
107 SCCOL Col() const;
108 SCTAB Tab() const;
110 /** Adjust ordering (front-top-left/rear-bottom-right) to a new position. */
111 static void PutInOrder( ScSingleRefData& rRef1, ScSingleRefData& rRef2, const ScAddress& rPos );
113 bool operator==( const ScSingleRefData& ) const;
114 bool operator!=( const ScSingleRefData& ) const;
116 #if DEBUG_FORMULA_COMPILER
117 void Dump( int nIndent = 0 ) const;
118 #endif
121 /// Complex reference (a range) into the sheet
122 struct ScComplexRefData
124 ScSingleRefData Ref1;
125 ScSingleRefData Ref2;
126 bool bTrimToData = false;
128 void InitFlags()
129 { Ref1.InitFlags(); Ref2.InitFlags(); }
130 void InitRange( const ScRange& rRange )
132 Ref1.InitAddress( rRange.aStart );
133 Ref2.InitAddress( rRange.aEnd );
135 void InitRangeRel( const ScDocument& rDoc, const ScRange& rRange, const ScAddress& rPos )
137 Ref1.InitAddressRel( rDoc, rRange.aStart, rPos );
138 Ref2.InitAddressRel( rDoc, rRange.aEnd, rPos );
140 void InitRange( SCCOL nCol1, SCROW nRow1, SCTAB nTab1,
141 SCCOL nCol2, SCROW nRow2, SCTAB nTab2 )
143 Ref1.InitAddress( nCol1, nRow1, nTab1 );
144 Ref2.InitAddress( nCol2, nRow2, nTab2 );
147 /// InitFlags and set range, relative to rPos if rRef1 and rRef2 say so.
148 void InitFromRefAddresses( const ScDocument& rDoc, const ScRefAddress& rRef1, const ScRefAddress& rRef2, const ScAddress& rPos );
150 bool Valid(const ScDocument& rDoc) const;
152 /** In external references nTab is -1 for the start tab and -1 for the end
153 tab if one sheet and the external document was not loaded but sheet was
154 cached, or >=0 also if more than one sheets. */
155 bool ValidExternal(const ScDocument& rDoc) const;
157 /** Whether this references entire columns, A:A */
158 bool IsEntireCol( const ScSheetLimits& rLimits ) const;
160 /** Whether this references entire rows, 1:1 */
161 bool IsEntireRow( const ScSheetLimits& rLimits ) const;
163 SC_DLLPUBLIC ScRange toAbs( const ScSheetLimits& rLimits, const ScAddress& rPos ) const;
164 SC_DLLPUBLIC ScRange toAbs( const ScDocument& rDoc, const ScAddress& rPos ) const;
166 /** Set a new range, assuming that the ordering of the range matches the
167 ordering of the reference data flags already set. */
168 void SetRange( const ScSheetLimits& rLimits, const ScRange& rRange, const ScAddress& rPos );
170 /** Adjust ordering (front-top-left/rear-bottom-right) to a new position. */
171 void PutInOrder( const ScAddress& rPos );
173 bool operator==( const ScComplexRefData& r ) const
174 { return Ref1 == r.Ref1 && Ref2 == r.Ref2; }
175 /** Enlarge range if reference passed is not within existing range.
176 ScAddress position is used to calculate absolute references from
177 relative references. */
178 ScComplexRefData& Extend( const ScSheetLimits& rLimits, const ScSingleRefData & rRef, const ScAddress & rPos );
179 ScComplexRefData& Extend( const ScSheetLimits& rLimits, const ScComplexRefData & rRef, const ScAddress & rPos );
181 /** Increment or decrement end column unless or until sticky.
182 @see ScRange::IncEndColSticky()
183 @return TRUE if changed. */
184 bool IncEndColSticky( const ScDocument& rDoc, SCCOL nDelta, const ScAddress& rPos );
186 /** Increment or decrement end row unless or until sticky.
187 @see ScRange::IncEndRowSticky()
188 @return TRUE if changed. */
189 bool IncEndRowSticky( const ScDocument& rDoc, SCROW nDelta, const ScAddress& rPos );
191 bool IsDeleted() const;
193 bool IsTrimToData() const { return bTrimToData; }
194 void SetTrimToData(bool bSet) { bTrimToData = bSet; }
196 #if DEBUG_FORMULA_COMPILER
197 void Dump( int nIndent = 0 ) const;
198 #endif
201 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */