cui/source/tabpages/tplnedef.cxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #include <tools/urlobj.hxx>
  21 #include <vcl/svapp.hxx>
  22 #include <vcl/weld.hxx>
  23 #include <unotools/pathoptions.hxx>
  24 #include <sfx2/filedlghelper.hxx>
  25 #include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
  26
  27 #include <strings.hrc>
  28
  29 #include <svx/xlineit0.hxx>
  30 #include <svx/xlnwtit.hxx>
  31 #include <svx/xlndsit.hxx>
  32 #include <svx/xlnclit.hxx>
  33 #include <svx/xtable.hxx>
  34
  35 #include <svx/dlgctrl.hxx>
  36 #include <cuitabline.hxx>
  37 #include <defdlgname.hxx>
  38 #include <svx/svxdlg.hxx>
  39 #include <dialmgr.hxx>
  40 #include <svx/dlgutil.hxx>
  41 #include <svx/dialmgr.hxx>
  42 #include <svx/strings.hrc>
  43 #include <svx/svxids.hrc>
  44 #include <cuitabarea.hxx>
  45 #include <svtools/unitconv.hxx>
  46 #include <osl/diagnose.h>
  47
  48 #define XOUT_WIDTH    150
  49
  50 using namespace com::sun::star;
  51
  52
  53 SvxLineDefTabPage::SvxLineDefTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
  54     : SfxTabPage(pPage, pController, u"cui/ui/linestyletabpage.ui"_ustr, u"LineStylePage"_ustr, &rInAttrs)
  55     , rOutAttrs(rInAttrs)
  56     , aXLineAttr(rInAttrs.GetPool())
  57     , rXLSet(aXLineAttr.GetItemSet())
  58     , pnDashListState(nullptr)
  59     , pPageType(nullptr)
  60     , nDlgType(0)
  61     , pPosDashLb(nullptr)
  62     , m_xLbLineStyles(new SvxLineLB(m_xBuilder->weld_combo_box(u"LB_LINESTYLES"_ustr)))
  63     , m_xLbType1(m_xBuilder->weld_combo_box(u"LB_TYPE_1"_ustr))
  64     , m_xLbType2(m_xBuilder->weld_combo_box(u"LB_TYPE_2"_ustr))
  65     , m_xNumFldNumber1(m_xBuilder->weld_spin_button(u"NUM_FLD_1"_ustr))
  66     , m_xNumFldNumber2(m_xBuilder->weld_spin_button(u"NUM_FLD_2"_ustr))
  67     , m_xMtrLength1(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_LENGTH_1"_ustr, FieldUnit::CM))
  68     , m_xMtrLength2(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_LENGTH_2"_ustr, FieldUnit::CM))
  69     , m_xMtrDistance(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_DISTANCE"_ustr, FieldUnit::CM))
  70     , m_xCbxSynchronize(m_xBuilder->weld_check_button(u"CBX_SYNCHRONIZE"_ustr))
  71     , m_xBtnAdd(m_xBuilder->weld_button(u"BTN_ADD"_ustr))
  72     , m_xBtnModify(m_xBuilder->weld_button(u"BTN_MODIFY"_ustr))
  73     , m_xBtnDelete(m_xBuilder->weld_button(u"BTN_DELETE"_ustr))
  74     , m_xBtnLoad(m_xBuilder->weld_button(u"BTN_LOAD"_ustr))
  75     , m_xBtnSave(m_xBuilder->weld_button(u"BTN_SAVE"_ustr))
  76     , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, u"CTL_PREVIEW"_ustr, m_aCtlPreview))
  77 {
  78     // this page needs ExchangeSupport
  79     SetExchangeSupport();
  80
  81     // adjust metric
  82     eFUnit = GetModuleFieldUnit( rInAttrs );
  83
  84     switch ( eFUnit )
  85     {
  86         case FieldUnit::M:
  87         case FieldUnit::KM:
  88             eFUnit = FieldUnit::MM;
  89             break;
  90         default: ; //prevent warning
  91     }
  92     SetFieldUnit(*m_xMtrDistance, eFUnit);
  93     SetFieldUnit(*m_xMtrLength1, eFUnit);
  94     SetFieldUnit(*m_xMtrLength2, eFUnit);
  95
  96     // determine PoolUnit
  97     SfxItemPool* pPool = rOutAttrs.GetPool();
  98     assert(pPool && "Where is the pool?");
  99     ePoolUnit = pPool->GetMetric( SID_ATTR_LINE_WIDTH );
 100
 101     rXLSet.Put( XLineStyleItem(drawing::LineStyle_DASH) );
 102     rXLSet.Put( XLineWidthItem(XOUT_WIDTH) );
 103     rXLSet.Put( XLineDashItem( OUString(), XDash( css::drawing::DashStyle_RECT, 3, 7, 2, 40, 15 ) ) );
 104     rXLSet.Put( XLineColorItem(OUString(), COL_BLACK) );
 105
 106     // #i34740#
 107     m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
 108
 109     m_xBtnAdd->connect_clicked(LINK(this, SvxLineDefTabPage, ClickAddHdl_Impl));
 110     m_xBtnModify->connect_clicked(LINK(this, SvxLineDefTabPage, ClickModifyHdl_Impl));
 111     m_xBtnDelete->connect_clicked(LINK(this, SvxLineDefTabPage, ClickDeleteHdl_Impl));
 112     m_xBtnLoad->connect_clicked(LINK(this, SvxLineDefTabPage, ClickLoadHdl_Impl));
 113     m_xBtnSave->connect_clicked(LINK(this, SvxLineDefTabPage, ClickSaveHdl_Impl));
 114
 115     m_xNumFldNumber1->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber1Hdl_Impl));
 116     m_xNumFldNumber2->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber2Hdl_Impl));
 117     m_xLbLineStyles->connect_changed(LINK(this, SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl));
 118
 119     // #i122042# switch off default adding of 'none' and 'solid' entries
 120     // for this ListBox; we want to select only editable/dashed styles
 121     m_xLbLineStyles->setAddStandardFields(false);
 122
 123     // absolute (in mm) or relative (in %)
 124     m_xCbxSynchronize->connect_toggled(LINK(this, SvxLineDefTabPage, ChangeMetricHdl_Impl));
 125
 126     // preview must be updated when there's something changed
 127     Link<weld::ComboBox&, void> aLink = LINK(this, SvxLineDefTabPage, SelectTypeListBoxHdl_Impl);
 128     m_xLbType1->connect_changed(aLink);
 129     m_xLbType2->connect_changed(aLink);
 130     Link<weld::MetricSpinButton&,void> aLink2 = LINK( this, SvxLineDefTabPage, ChangePreviewHdl_Impl );
 131     m_xMtrLength1->connect_value_changed(aLink2);
 132     m_xMtrLength2->connect_value_changed(aLink2);
 133     m_xMtrDistance->connect_value_changed(aLink2);
 134
 135     pDashList = nullptr;
 136 }
 137
 138 SvxLineDefTabPage::~SvxLineDefTabPage()
 139 {
 140     m_xCtlPreview.reset();
 141     m_xLbLineStyles.reset();
 142 }
 143
 144 void SvxLineDefTabPage::Construct()
 145 {
 146     // Line style fill; do *not* add default fields here
 147     m_xLbLineStyles->Fill( pDashList );
 148 }
 149
 150 void SvxLineDefTabPage::ActivatePage( const SfxItemSet& )
 151 {
 152     if( nDlgType != 0 ) // area dialog
 153         return;
 154
 155     // ActivatePage() is called before the dialog receives PageCreated() !!!
 156     if( !pDashList.is() )
 157         return;
 158
 159     if (*pPageType == PageType::Gradient &&
 160         *pPosDashLb != -1)
 161     {
 162         m_xLbLineStyles->set_active(*pPosDashLb);
 163     }
 164     // so that a possibly existing line style is discarded
 165     SelectLinestyleHdl_Impl( nullptr );
 166
 167     // determining (and possibly cutting) the name
 168     // and displaying it in the GroupBox
 169 //             OUString        aString( CuiResId( RID_CUISTR_TABLE ) );
 170 //             aString         += ": ";
 171     INetURLObject   aURL( pDashList->GetPath() );
 172
 173     aURL.Append( pDashList->GetName() );
 174     DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
 175
 176     *pPageType = PageType::Area; // 2
 177     *pPosDashLb = -1;
 178 }
 179
 180
 181 DeactivateRC SvxLineDefTabPage::DeactivatePage( SfxItemSet* _pSet )
 182 {
 183     CheckChanges_Impl();
 184
 185     if( _pSet )
 186         FillItemSet( _pSet );
 187
 188     return DeactivateRC::LeavePage;
 189 }
 190
 191 void SvxLineDefTabPage::CheckChanges_Impl()
 192 {
 193     // is here used to NOT lose changes
 194     //css::drawing::DashStyle eXDS;
 195
 196     if( m_xNumFldNumber1->get_value_changed_from_saved() ||
 197         m_xMtrLength1->get_value_changed_from_saved() ||
 198         m_xLbType1->get_value_changed_from_saved() ||
 199         m_xNumFldNumber2->get_value_changed_from_saved() ||
 200         m_xMtrLength2->get_value_changed_from_saved() ||
 201         m_xLbType2->get_value_changed_from_saved() ||
 202         m_xMtrDistance->get_value_changed_from_saved() )
 203     {
 204         std::unique_ptr<weld::MessageDialog> xMessDlg(Application::CreateMessageDialog(GetFrameWeld(),
 205                                                       VclMessageType::Warning, VclButtonsType::Cancel,
 206                                                       CuiResId(RID_CUISTR_ASK_CHANGE_LINESTYLE)));
 207         xMessDlg->set_title(SvxResId(RID_SVXSTR_LINESTYLE));
 208         xMessDlg->add_button(CuiResId(RID_CUISTR_CHANGE), RET_BTN_1);
 209         xMessDlg->add_button(CuiResId(RID_CUISTR_ADD), RET_BTN_2);
 210
 211         short nRet = xMessDlg->run();
 212
 213         switch( nRet )
 214         {
 215             case RET_BTN_1:
 216             {
 217                 ClickModifyHdl_Impl(*m_xBtnModify);
 218             }
 219             break;
 220
 221             case RET_BTN_2:
 222             {
 223                 ClickAddHdl_Impl(*m_xBtnAdd);
 224             }
 225             break;
 226
 227             case RET_CANCEL:
 228             break;
 229         }
 230     }
 231
 232     int nPos = m_xLbLineStyles->get_active();
 233     if (nPos != -1)
 234     {
 235         *pPosDashLb = nPos;
 236     }
 237 }
 238
 239
 240 bool SvxLineDefTabPage::FillItemSet( SfxItemSet* rAttrs )
 241 {
 242     if( nDlgType == 0 ) // line dialog
 243     {
 244         if( *pPageType == PageType::Hatch )
 245         {
 246             FillDash_Impl();
 247
 248             OUString aString(m_xLbLineStyles->get_active_text());
 249             rAttrs->Put( XLineStyleItem( drawing::LineStyle_DASH ) );
 250             rAttrs->Put( XLineDashItem( aString, aDash ) );
 251         }
 252     }
 253     return true;
 254 }
 255
 256
 257 void SvxLineDefTabPage::Reset( const SfxItemSet* rAttrs )
 258 {
 259     if( rAttrs->GetItemState( GetWhich( XATTR_LINESTYLE ) ) != SfxItemState::INVALID )
 260     {
 261         drawing::LineStyle eXLS = rAttrs->Get( GetWhich( XATTR_LINESTYLE ) ).GetValue();
 262
 263         switch( eXLS )
 264         {
 265             case drawing::LineStyle_NONE:
 266             case drawing::LineStyle_SOLID:
 267                 m_xLbLineStyles->set_active(0);
 268                 break;
 269             case drawing::LineStyle_DASH:
 270             {
 271                 const XLineDashItem& rDashItem = rAttrs->Get( XATTR_LINEDASH );
 272                 aDash = rDashItem.GetDashValue();
 273
 274                 m_xLbLineStyles->set_active(-1);
 275                 m_xLbLineStyles->set_active_text(rDashItem.GetName());
 276                 break;
 277             }
 278             default:
 279                 break;
 280         }
 281     }
 282     SelectLinestyleHdl_Impl( nullptr );
 283
 284     // determine button state
 285     if( pDashList->Count() )
 286     {
 287         m_xBtnModify->set_sensitive(true);
 288         m_xBtnDelete->set_sensitive(true);
 289         m_xBtnSave->set_sensitive(true);
 290     }
 291     else
 292     {
 293         m_xBtnModify->set_sensitive(false);
 294         m_xBtnDelete->set_sensitive(false);
 295         m_xBtnSave->set_sensitive(false);
 296     }
 297 }
 298
 299 std::unique_ptr<SfxTabPage> SvxLineDefTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs )
 300 {
 301     return std::make_unique<SvxLineDefTabPage>(pPage, pController, *rOutAttrs);
 302 }
 303
 304 IMPL_LINK(SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl, weld::ComboBox&, rListBox, void)
 305 {
 306     SelectLinestyleHdl_Impl(&rListBox);
 307 }
 308
 309 void SvxLineDefTabPage::SelectLinestyleHdl_Impl(const weld::ComboBox* p)
 310 {
 311     if(!pDashList->Count())
 312         return;
 313
 314     int nTmp = m_xLbLineStyles->get_active();
 315     if (nTmp == -1)
 316     {
 317         OSL_ENSURE(false, "OOps, non-existent LineDash selected (!)");
 318         nTmp = 1;
 319     }
 320
 321     aDash = pDashList->GetDash( nTmp )->GetDash();
 322
 323     FillDialog_Impl();
 324
 325     rXLSet.Put( XLineDashItem( OUString(), aDash ) );
 326
 327     // #i34740#
 328     m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
 329     m_aCtlPreview.Invalidate();
 330
 331     // Is not set before, in order to take the new style
 332     // only if there was an entry selected in the ListBox.
 333     // If it was called via Reset(), then p is == NULL
 334     if( p )
 335         *pPageType = PageType::Hatch;
 336 }
 337
 338 IMPL_LINK_NOARG(SvxLineDefTabPage, ChangePreviewHdl_Impl, weld::MetricSpinButton&, void)
 339 {
 340     FillDash_Impl();
 341     m_aCtlPreview.Invalidate();
 342 }
 343
 344 IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber1Hdl_Impl, weld::SpinButton&, void)
 345 {
 346     if (m_xNumFldNumber1->get_value() == 0)
 347     {
 348         m_xNumFldNumber2->set_min(1);
 349     }
 350     else
 351     {
 352         m_xNumFldNumber2->set_min(0);
 353     }
 354
 355     ChangePreviewHdl_Impl(*m_xMtrLength1);
 356 }
 357
 358 IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber2Hdl_Impl, weld::SpinButton&, void)
 359 {
 360     if (m_xNumFldNumber2->get_value() == 0)
 361     {
 362         m_xNumFldNumber1->set_min(1);
 363     }
 364     else
 365     {
 366         m_xNumFldNumber1->set_min(0);
 367     }
 368
 369     ChangePreviewHdl_Impl(*m_xMtrLength1);
 370 }
 371
 372 IMPL_LINK( SvxLineDefTabPage, ChangeMetricHdl_Impl, weld::Toggleable&, r, void)
 373 {
 374     ChangeMetricHdl_Impl(&r);
 375 }
 376
 377 void SvxLineDefTabPage::ChangeMetricHdl_Impl(const weld::Toggleable* p)
 378 {
 379     if( !m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != eFUnit )
 380     {
 381         tools::Long nTmp1, nTmp2, nTmp3;
 382
 383         // was changed with Control
 384         if( p )
 385         {
 386             nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * XOUT_WIDTH / 100;
 387             nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * XOUT_WIDTH / 100;
 388             nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * XOUT_WIDTH / 100;
 389         }
 390         else
 391         {
 392             nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
 393             nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
 394             nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
 395         }
 396         m_xMtrLength1->set_digits(2);
 397         m_xMtrLength2->set_digits(2);
 398         m_xMtrDistance->set_digits(2);
 399
 400         // adjust metric
 401         m_xMtrLength1->set_unit(eFUnit);
 402         m_xMtrLength2->set_unit(eFUnit);
 403         m_xMtrDistance->set_unit(eFUnit);
 404
 405         // tdf#126736 max 5cm
 406         m_xMtrLength1->set_range(0, 500, FieldUnit::CM);
 407         m_xMtrLength2->set_range(0, 500, FieldUnit::CM);
 408         m_xMtrDistance->set_range(0, 500, FieldUnit::CM);
 409
 410         SetMetricValue( *m_xMtrLength1, nTmp1, ePoolUnit );
 411         SetMetricValue( *m_xMtrLength2, nTmp2, ePoolUnit );
 412         SetMetricValue( *m_xMtrDistance, nTmp3, ePoolUnit );
 413     }
 414     else if( m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != FieldUnit::PERCENT )
 415     {
 416         tools::Long nTmp1, nTmp2, nTmp3;
 417
 418         // was changed with Control
 419         if( p )
 420         {
 421             nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * 100 / XOUT_WIDTH;
 422             nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * 100 / XOUT_WIDTH;
 423             nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * 100 / XOUT_WIDTH;
 424         }
 425         else
 426         {
 427             nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
 428             nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
 429             nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
 430         }
 431
 432         m_xMtrLength1->set_digits(0);
 433         m_xMtrLength2->set_digits(0);
 434         m_xMtrDistance->set_digits(0);
 435
 436         m_xMtrLength1->set_unit(FieldUnit::PERCENT);
 437         m_xMtrLength2->set_unit(FieldUnit::PERCENT);
 438         m_xMtrDistance->set_unit(FieldUnit::PERCENT);
 439
 440         // tdf#126736 800%
 441         m_xMtrLength1->set_range(0, 800, FieldUnit::PERCENT);
 442         m_xMtrLength2->set_range(0, 800, FieldUnit::PERCENT);
 443         m_xMtrDistance->set_range(0, 800, FieldUnit::PERCENT);
 444
 445         m_xMtrLength1->set_value(nTmp1, FieldUnit::PERCENT);
 446         m_xMtrLength2->set_value(nTmp2, FieldUnit::PERCENT);
 447         m_xMtrDistance->set_value(nTmp3, FieldUnit::PERCENT);
 448     }
 449     SelectTypeHdl_Impl( nullptr );
 450 }
 451
 452 IMPL_LINK( SvxLineDefTabPage, SelectTypeListBoxHdl_Impl, weld::ComboBox&, rListBox, void )
 453 {
 454     SelectTypeHdl_Impl(&rListBox);
 455 }
 456
 457 void  SvxLineDefTabPage::SelectTypeHdl_Impl(const weld::ComboBox* p)
 458 {
 459     if (p == m_xLbType1.get() || !p)
 460     {
 461         if (m_xLbType1->get_active() == 0)
 462         {
 463             m_xMtrLength1->set_sensitive(false);
 464             m_xMtrLength1->set_text(u""_ustr);
 465         }
 466         else if (!m_xMtrLength1->get_sensitive())
 467         {
 468             m_xMtrLength1->set_sensitive(true);
 469             m_xMtrLength1->reformat();
 470         }
 471     }
 472
 473     if (p == m_xLbType2.get() || !p)
 474     {
 475         if (m_xLbType2->get_active() == 0)
 476         {
 477             m_xMtrLength2->set_sensitive(false);
 478             m_xMtrLength2->set_text(u""_ustr);
 479         }
 480         else if (!m_xMtrLength2->get_sensitive())
 481         {
 482             m_xMtrLength2->set_sensitive(true);
 483             m_xMtrLength2->reformat();
 484         }
 485     }
 486     ChangePreviewHdl_Impl(*m_xMtrLength1);
 487 }
 488
 489 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickAddHdl_Impl, weld::Button&, void)
 490 {
 491     OUString aNewName(SvxResId(RID_SVXSTR_LINESTYLE));
 492     OUString aDesc(CuiResId(RID_CUISTR_DESC_LINESTYLE));
 493     OUString aName;
 494
 495     tools::Long nCount = pDashList->Count();
 496     tools::Long j = 1;
 497     bool bDifferent = false;
 498
 499     while ( !bDifferent )
 500     {
 501         aName = aNewName + " " + OUString::number( j++ );
 502         bDifferent = true;
 503
 504         for ( tools::Long i = 0; i < nCount && bDifferent; i++ )
 505             if ( aName == pDashList->GetDash( i )->GetName() )
 506                 bDifferent = false;
 507     }
 508
 509     SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
 510     ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
 511     bool bLoop = true;
 512
 513     while ( bLoop && pDlg->Execute() == RET_OK )
 514     {
 515         aName = pDlg->GetName();
 516         bDifferent = true;
 517
 518         for( tools::Long i = 0; i < nCount && bDifferent; i++ )
 519         {
 520             if( aName == pDashList->GetDash( i )->GetName() )
 521                 bDifferent = false;
 522         }
 523
 524         if( bDifferent )
 525         {
 526             bLoop = false;
 527             FillDash_Impl();
 528
 529             tools::Long nDashCount = pDashList->Count();
 530             pDashList->Insert( std::make_unique<XDashEntry>(aDash, aName), nDashCount );
 531             m_xLbLineStyles->Append( *pDashList->GetDash(nDashCount), pDashList->GetUiBitmap(nDashCount) );
 532
 533             m_xLbLineStyles->set_active(m_xLbLineStyles->get_count() - 1);
 534
 535             *pnDashListState |= ChangeType::MODIFIED;
 536
 537             *pPageType = PageType::Hatch;
 538
 539             // save values for changes recognition (-> method)
 540             m_xNumFldNumber1->save_value();
 541             m_xMtrLength1->save_value();
 542             m_xLbType1->save_value();
 543             m_xNumFldNumber2->save_value();
 544             m_xMtrLength2->save_value();
 545             m_xLbType2->save_value();
 546             m_xMtrDistance->save_value();
 547         }
 548         else
 549         {
 550             std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"cui/ui/queryduplicatedialog.ui"_ustr));
 551             std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog(u"DuplicateNameDialog"_ustr));
 552             xBox->run();
 553         }
 554     }
 555     pDlg.disposeAndClear();
 556
 557     // determine button state
 558     if ( pDashList->Count() )
 559     {
 560         m_xBtnModify->set_sensitive(true);
 561         m_xBtnDelete->set_sensitive(true);
 562         m_xBtnSave->set_sensitive(true);
 563     }
 564 }
 565
 566 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickModifyHdl_Impl, weld::Button&, void)
 567 {
 568     int nPos = m_xLbLineStyles->get_active();
 569     if (nPos == -1)
 570         return;
 571
 572     OUString aDesc(CuiResId(RID_CUISTR_DESC_LINESTYLE));
 573     OUString aName( pDashList->GetDash( nPos )->GetName() );
 574     OUString aOldName = aName;
 575
 576     SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
 577     ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
 578
 579     tools::Long nCount = pDashList->Count();
 580     bool bLoop = true;
 581
 582     while ( bLoop && pDlg->Execute() == RET_OK )
 583     {
 584         aName = pDlg->GetName();
 585         bool bDifferent = true;
 586
 587         for( tools::Long i = 0; i < nCount && bDifferent; i++ )
 588         {
 589             if( aName == pDashList->GetDash( i )->GetName() &&
 590                 aName != aOldName )
 591                 bDifferent = false;
 592         }
 593
 594         if ( bDifferent )
 595         {
 596             bLoop = false;
 597             FillDash_Impl();
 598
 599             pDashList->Replace(std::make_unique<XDashEntry>(aDash, aName), nPos);
 600             m_xLbLineStyles->Modify(*pDashList->GetDash(nPos), nPos, pDashList->GetUiBitmap(nPos));
 601
 602             m_xLbLineStyles->set_active(nPos);
 603
 604             *pnDashListState |= ChangeType::MODIFIED;
 605
 606             *pPageType = PageType::Hatch;
 607
 608             // save values for changes recognition (-> method)
 609             m_xNumFldNumber1->save_value();
 610             m_xMtrLength1->save_value();
 611             m_xLbType1->save_value();
 612             m_xNumFldNumber2->save_value();
 613             m_xMtrLength2->save_value();
 614             m_xLbType2->save_value();
 615             m_xMtrDistance->save_value();
 616         }
 617         else
 618         {
 619             std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"cui/ui/queryduplicatedialog.ui"_ustr));
 620             std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog(u"DuplicateNameDialog"_ustr));
 621             xBox->run();
 622         }
 623     }
 624 }
 625
 626 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickDeleteHdl_Impl, weld::Button&, void)
 627 {
 628     int nPos = m_xLbLineStyles->get_active();
 629     if (nPos != -1)
 630     {
 631         std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"cui/ui/querydeletelinestyledialog.ui"_ustr));
 632         std::unique_ptr<weld::MessageDialog> xQueryBox(xBuilder->weld_message_dialog(u"AskDelLineStyleDialog"_ustr));
 633         if (xQueryBox->run() == RET_YES)
 634         {
 635             pDashList->Remove(nPos);
 636             m_xLbLineStyles->remove(nPos);
 637             m_xLbLineStyles->set_active(0);
 638
 639             SelectLinestyleHdl_Impl( nullptr );
 640             *pPageType = PageType::Area; // style should not be taken
 641
 642             *pnDashListState |= ChangeType::MODIFIED;
 643
 644             ChangePreviewHdl_Impl( *m_xMtrLength1 );
 645         }
 646     }
 647
 648     // determine button state
 649     if ( !pDashList->Count() )
 650     {
 651         m_xBtnModify->set_sensitive(false);
 652         m_xBtnDelete->set_sensitive(false);
 653         m_xBtnSave->set_sensitive(false);
 654     }
 655 }
 656
 657 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickLoadHdl_Impl, weld::Button&, void)
 658 {
 659     sal_uInt16 nReturn = RET_YES;
 660
 661     if ( *pnDashListState & ChangeType::MODIFIED )
 662     {
 663         std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"cui/ui/querysavelistdialog.ui"_ustr));
 664         std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog(u"AskSaveList"_ustr));
 665
 666         nReturn = xBox->run();
 667
 668         if ( nReturn == RET_YES )
 669             pDashList->Save();
 670     }
 671
 672     if ( nReturn != RET_CANCEL )
 673     {
 674         ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILEOPEN_SIMPLE,
 675                                       FileDialogFlags::NONE, GetFrameWeld());
 676         OUString aStrFilterType( u"*.sod"_ustr );
 677         aDlg.AddFilter( aStrFilterType, aStrFilterType );
 678         OUString aPalettePath(SvtPathOptions().GetPalettePath());
 679         OUString aLastDir;
 680         sal_Int32 nIndex = 0;
 681         do
 682         {
 683             aLastDir = aPalettePath.getToken(0, ';', nIndex);
 684         }
 685         while (nIndex >= 0);
 686
 687         INetURLObject aFile(aLastDir);
 688         aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
 689
 690         if( aDlg.Execute() == ERRCODE_NONE )
 691         {
 692             INetURLObject aURL( aDlg.GetPath() );
 693             INetURLObject aPathURL( aURL );
 694
 695             aPathURL.removeSegment();
 696             aPathURL.removeFinalSlash();
 697
 698             XDashListRef pDshLst = XPropertyList::AsDashList(XPropertyList::CreatePropertyList( XPropertyListType::Dash, aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), u""_ustr ));
 699             pDshLst->SetName( aURL.getName() );
 700
 701             if( pDshLst->Load() )
 702             {
 703                 pDashList = pDshLst;
 704                 static_cast<SvxLineTabDialog*>(GetDialogController())->SetNewDashList( pDashList );
 705
 706                 m_xLbLineStyles->clear();
 707                 m_xLbLineStyles->Fill( pDashList );
 708                 Reset( &rOutAttrs );
 709
 710                 pDashList->SetName( aURL.getName() );
 711
 712                 *pnDashListState |= ChangeType::CHANGED;
 713                 *pnDashListState &= ~ChangeType::MODIFIED;
 714             }
 715             else
 716             {
 717                 std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"cui/ui/querynoloadedfiledialog.ui"_ustr));
 718                 std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog(u"NoLoadedFileDialog"_ustr));
 719                 xBox->run();
 720             }
 721         }
 722     }
 723
 724     // determine button state
 725     if ( pDashList->Count() )
 726     {
 727         m_xBtnModify->set_sensitive(true);
 728         m_xBtnDelete->set_sensitive(true);
 729         m_xBtnSave->set_sensitive(true);
 730     }
 731     else
 732     {
 733         m_xBtnModify->set_sensitive(false);
 734         m_xBtnDelete->set_sensitive(false);
 735         m_xBtnSave->set_sensitive(false);
 736     }
 737 }
 738
 739 IMPL_LINK_NOARG(SvxLineDefTabPage, ClickSaveHdl_Impl, weld::Button&, void)
 740 {
 741     ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILESAVE_SIMPLE, FileDialogFlags::NONE, GetFrameWeld());
 742     OUString aStrFilterType( u"*.sod"_ustr );
 743     aDlg.AddFilter( aStrFilterType, aStrFilterType );
 744
 745     OUString aPalettePath(SvtPathOptions().GetPalettePath());
 746     OUString aLastDir;
 747     sal_Int32 nIndex = 0;
 748     do
 749     {
 750         aLastDir = aPalettePath.getToken(0, ';', nIndex);
 751     }
 752     while (nIndex >= 0);
 753
 754     INetURLObject aFile(aLastDir);
 755     DBG_ASSERT( aFile.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
 756
 757     if( !pDashList->GetName().isEmpty() )
 758     {
 759         aFile.Append( pDashList->GetName() );
 760
 761         if( aFile.getExtension().isEmpty() )
 762             aFile.SetExtension( u"sod" );
 763     }
 764
 765     aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
 766     if ( aDlg.Execute() != ERRCODE_NONE )
 767         return;
 768
 769     INetURLObject aURL( aDlg.GetPath() );
 770     INetURLObject aPathURL( aURL );
 771
 772     aPathURL.removeSegment();
 773     aPathURL.removeFinalSlash();
 774
 775     pDashList->SetName( aURL.getName() );
 776     pDashList->SetPath( aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
 777
 778     if( pDashList->Save() )
 779     {
 780         *pnDashListState &= ~ChangeType::MODIFIED;
 781     }
 782     else
 783     {
 784         std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"cui/ui/querynosavefiledialog.ui"_ustr));
 785         std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog(u"NoSaveFileDialog"_ustr));
 786         xBox->run();
 787     }
 788 }
 789
 790 void SvxLineDefTabPage::FillDash_Impl()
 791 {
 792     css::drawing::DashStyle eXDS;
 793
 794     if (m_xCbxSynchronize->get_active())
 795         eXDS = css::drawing::DashStyle_RECTRELATIVE;
 796     else
 797         eXDS = css::drawing::DashStyle_RECT;
 798
 799     aDash.SetDashStyle( eXDS );
 800     aDash.SetDots( static_cast<sal_uInt8>(m_xNumFldNumber1->get_value()) );
 801     aDash.SetDotLen( m_xLbType1->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength1, ePoolUnit ) );
 802     aDash.SetDashes( static_cast<sal_uInt8>(m_xNumFldNumber2->get_value()) );
 803     aDash.SetDashLen( m_xLbType2->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength2, ePoolUnit ) );
 804     aDash.SetDistance( GetCoreValue( *m_xMtrDistance, ePoolUnit ) );
 805
 806     rXLSet.Put( XLineDashItem( OUString(), aDash ) );
 807
 808     // #i34740#
 809     m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
 810 }
 811
 812 void SvxLineDefTabPage::FillDialog_Impl()
 813 {
 814     css::drawing::DashStyle eXDS = aDash.GetDashStyle(); // css::drawing::DashStyle_RECT, css::drawing::DashStyle_ROUND
 815     if( eXDS == css::drawing::DashStyle_RECTRELATIVE )
 816         m_xCbxSynchronize->set_active(true);
 817     else
 818         m_xCbxSynchronize->set_active(false);
 819
 820     m_xNumFldNumber1->set_value(aDash.GetDots());
 821     SetMetricValue( *m_xMtrLength1, aDash.GetDotLen(), ePoolUnit );
 822     m_xLbType1->set_active(aDash.GetDotLen() == 0 ? 0 : 1);
 823     m_xNumFldNumber2->set_value(aDash.GetDashes());
 824     SetMetricValue( *m_xMtrLength2, aDash.GetDashLen(), ePoolUnit );
 825     m_xLbType2->set_active(aDash.GetDashLen() == 0 ? 0 : 1);
 826     SetMetricValue( *m_xMtrDistance, aDash.GetDistance(), ePoolUnit );
 827
 828     ChangeMetricHdl_Impl(nullptr);
 829
 830     // save values for changes recognition (-> method)
 831     m_xNumFldNumber1->save_value();
 832     m_xMtrLength1->save_value();
 833     m_xLbType1->save_value();
 834     m_xNumFldNumber2->save_value();
 835     m_xMtrLength2->save_value();
 836     m_xLbType2->save_value();
 837     m_xMtrDistance->save_value();
 838 }
 839
 840 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */