external/nss/nsinstall.py

   1 # ***** BEGIN LICENSE BLOCK *****
   2 # Version: MPL 1.1/GPL 2.0/LGPL 2.1
   3 #
   4 # The contents of this file are subject to the Mozilla Public License Version
   5 # 1.1 (the "License"); you may not use this file except in compliance with
   6 # the License. You may obtain a copy of the License at
   7 # http://www.mozilla.org/MPL/
   8 #
   9 # Software distributed under the License is distributed on an "AS IS" basis,
  10 # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
  11 # for the specific language governing rights and limitations under the
  12 # License.
  13 #
  14 # The Original Code is Mozilla.
  15 #
  16 # The Initial Developer of the Original Code is
  17 # the Mozilla Foundation.
  18 # Portions created by the Initial Developer are Copyright (C) 2007
  19 # the Initial Developer. All Rights Reserved.
  20 #
  21 # Contributor(s):
  22 #   Axel Hecht <axel@pike.org>
  23 #
  24 # Alternatively, the contents of this file may be used under the terms of
  25 # either the GNU General Public License Version 2 or later (the "GPL"), or
  26 # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
  27 # in which case the provisions of the GPL or the LGPL are applicable instead
  28 # of those above. If you wish to allow use of your version of this file only
  29 # under the terms of either the GPL or the LGPL, and not to allow others to
  30 # use your version of this file under the terms of the MPL, indicate your
  31 # decision by deleting the provisions above and replace them with the notice
  32 # and other provisions required by the GPL or the LGPL. If you do not delete
  33 # the provisions above, a recipient may use your version of this file under
  34 # the terms of any one of the MPL, the GPL or the LGPL.
  35 #
  36 # ***** END LICENSE BLOCK *****
  37
  38 # This is a partial python port of nsinstall.
  39 # It's intended to be used when there's no natively compile nsinstall
  40 # available, and doesn't intend to be fully equivalent.
  41 # Its major use is for l10n repackaging on systems that don't have
  42 # a full build environment set up.
  43 # The basic limitation is, it doesn't even try to link and ignores
  44 # all related options.
  45
  46 from optparse import OptionParser
  47 import os
  48 import os.path
  49 import sys
  50 import shutil
  51
  52 def nsinstall(argv):
  53   usage = "usage: %prog [options] arg1 [arg2 ...] target-directory"
  54   p = OptionParser(usage=usage)
  55
  56   p.add_option('-D', action="store_true",
  57                help="Create a single directory only")
  58   p.add_option('-t', action="store_true",
  59                help="Preserve time stamp")
  60   p.add_option('-m', action="store",
  61                help="Set mode", metavar="mode")
  62   p.add_option('-d', action="store_true",
  63                help="Create directories in target")
  64   p.add_option('-R', action="store_true",
  65                help="Use relative symbolic links (ignored)")
  66   p.add_option('-l', action="store_true",
  67                help="Create link (ignored)")
  68   p.add_option('-L', action="store", metavar="linkprefix",
  69                help="Link prefix (ignored)")
  70
  71   # The remaining arguments are not used in our tree, thus they're not
  72   # implented.
  73   def BadArg(option, opt, value, parser):
  74     parser.error('option not supported: %s' % opt)
  75
  76   p.add_option('-C', action="callback", metavar="CWD",
  77                callback=BadArg,
  78                help="NOT SUPPORTED")
  79   p.add_option('-o', action="callback", callback=BadArg,
  80                help="Set owner (NOT SUPPORTED)", metavar="owner")
  81   p.add_option('-g', action="callback", callback=BadArg,
  82                help="Set group (NOT SUPPORTED)", metavar="group")
  83
  84   (options, args) = p.parse_args(argv)
  85
  86   if options.m:
  87     # mode is specified
  88     try:
  89       options.m = int(options.m, 8)
  90       # I have no idea why nss insists on using this mode for installed headers.
  91       # It causes problems with updating the files during a rebuild.
  92       if options.m == 0o444:
  93         options.m = 0o644
  94     except:
  95       sys.stderr.write('nsinstall: ' + options.m + ' is not a valid mode\n')
  96       return 1
  97
  98   # just create one directory?
  99   if options.D:
 100     if len(args) != 1:
 101       return 1
 102     if os.path.exists(args[0]):
 103       if not os.path.isdir(args[0]):
 104         sys.stderr.write('nsinstall: ' + args[0] + ' is not a directory\n')
 105         sys.exit(1)
 106       if options.m:
 107         os.chmod(args[0], options.m)
 108       sys.exit()
 109     if options.m:
 110       os.makedirs(args[0], options.m)
 111     else:
 112       os.makedirs(args[0])
 113     return 0
 114
 115   # nsinstall arg1 [...] directory
 116   if len(args) < 2:
 117     p.error('not enough arguments')
 118
 119   def copy_all_entries(entries, target):
 120     for e in entries:
 121       dest = os.path.join(target,
 122                           os.path.basename(os.path.normpath(e)))
 123       handleTarget(e, dest)
 124       if options.m:
 125         os.chmod(dest, options.m)
 126
 127   # set up handler
 128   if options.d:
 129     # we're supposed to create directories
 130     def handleTarget(srcpath, targetpath):
 131       # target directory was already created, just use mkdir
 132       os.mkdir(targetpath)
 133   else:
 134     # we're supposed to copy files
 135     def handleTarget(srcpath, targetpath):
 136       if os.path.isdir(srcpath):
 137         if not os.path.exists(targetpath):
 138           os.mkdir(targetpath)
 139         entries = [os.path.join(srcpath, e) for e in os.listdir(srcpath)]
 140         copy_all_entries(entries, targetpath)
 141         # options.t is not relevant for directories
 142         if options.m:
 143           os.chmod(targetpath, options.m)
 144       elif options.t:
 145         if os.path.exists(targetpath):
 146           os.remove(targetpath)
 147         shutil.copy2(srcpath, targetpath)
 148       else:
 149         if os.path.exists(targetpath):
 150           os.chmod(targetpath, 0o755)
 151           os.remove(targetpath)
 152         shutil.copy(srcpath, targetpath)
 153
 154   # the last argument is the target directory
 155   target = args.pop()
 156   # ensure target directory
 157   if not os.path.isdir(target):
 158     os.makedirs(target)
 159
 160   copy_all_entries(args, target)
 161   return 0
 162
 163 if __name__ == '__main__':
 164   sys.exit(nsinstall(sys.argv[1:]))