From 3068767250420008e7a274b88e8ab16b849fb1bd Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 16 Jan 2012 22:59:47 +0100 Subject: [PATCH] added some stuff (backspaceesque keys and standard keys) --- backspace.scad | 181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ key-std.scad | 186 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 367 insertions(+) create mode 100644 backspace.scad create mode 100644 key-std.scad diff --git a/backspace.scad b/backspace.scad new file mode 100644 index 0000000..aff209e --- /dev/null +++ b/backspace.scad @@ -0,0 +1,181 @@ +//measures are in millimeters +//(feel free to cocnvert them to attoparsecs) +AY=36.75; +AX=19.0; +BY=31.75; +BLX=14.5; +EZ=11.0; +FLZ=14.0; +H=12.75; +SHAFT_OFF_Y=28.0; +BLIND_SHAFT_OFF_Y=9.0; +CYL_OFF_Z=150; +CYL_DEPTH=0.1; +CLIP_X=2; +CLIP_Y=0.75; +CLIP_H=3*CLIP_Y; +CORNER_RADIUS=2; +INNER_GUARD_RADIUS=6.5; +OUTER_GUARD_RADIUS=7.5; +BLIND_SHAFT_OUTER_DIAMETER=4.0; +BLIND_SHAFT_INNER_DIAMETER=2.0; +SHAFT_X=8.0; +SHAFT_Y=6.0; +SHAFT_LENGTH=9.0; +SHAFT_THICKNESS=1.0; +SHAFT_CLIP_WIDTH=3.0; +SHAFT_CLIP_THICKNESS=0.75; +SHAFT_CLIP_HEIGHT=2.0; +SHAFT_CLIP_SLOPE_DEPTH=1.0; +SHAFT_CLIP_ANGLE=45; +SHAFT_END_CUTOUT_HEIGHT=1.5; +SHAFT_LARGE_SLOT_TO_BASE=1.5; +SHAFT_SMALL_SLOT_LENGTH=7.25; +SHAFT_SMALL_SLOT_WIDTH=2.5; +SHAFT_SPRING_HOLDER_WIDTH=3.0; +SHAFT_SPRING_HOLDER_TO_BASE=4.0; +SHAFT_SPRING_GUIDE_WIDTH=1.0; +SHAFT_SPRING_GUIDE_SIDES_HEIGHT=3.5; +STRUT_THICKNESS=1; +STRUT_HEIGHT=3; +STRUT_SPACING=1; +SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT=1; +SHAFT_SPRING_HOLDER_NIPPLE_RADIUS=0.75; + +SHAFT_SMALL_SLOT_BEVEL=0.5; + +WallThickness=0.75; +ClipWidth=2.2; +ClipDepth=0.75; + +//ascfront=FLZ/sqrt(pow(FLZ,2)-pow(H,2)); +//asctop=(H-EZ)/sqrt(pow(BLX,2)-pow((H-EZ),2)); + +alpha=asin((H-EZ)/BLX); +beta=asin(H/FLZ); +gamma=90-asin((0.5*(AY-BY))/EZ); + +module keycap(){ + scale([AX/(AX+2*CORNER_RADIUS),AY/(AY+2*CORNER_RADIUS),1]) + translate([CORNER_RADIUS,CORNER_RADIUS,0.01]) + minkowski(){ + difference(){ + cube([AX,AY,H]); + rotate(a=gamma,v=[1,0,0]) cube([100,100,100]); + translate([0,AY,0]) rotate(a=90-gamma,v=[1,0,0]) cube([100,100,100]); + translate([0,0,EZ]) rotate(a=-alpha,v=[0,1,0]) translate([-50,0,0]) cube([100,100,100]); + translate([0,AY/2,EZ+CYL_OFF_Z]) rotate(a=90-alpha,v=[0,1,0]) cylinder(h=100,center=true,r=CYL_OFF_Z+CYL_DEPTH,$fa=1); + translate([AX,0,0]) rotate(a=beta-90,v=[0,1,0]) cube([100,100,100]); + } + cylinder(h=0.01,r=CORNER_RADIUS,$fs=0.6); + //rotate(a=90,v=[1,0,0]) cylinder(h=0.01,r=1,$fs=0.3); + } +} + +module blind_shaft(){ + translate([0,0,-SHAFT_LENGTH]) difference(){ + cylinder(r=BLIND_SHAFT_OUTER_DIAMETER/2,h=100,$fs=0.3); + cylinder(r=BLIND_SHAFT_INNER_DIAMETER/2,h=100,$fs=0.3); + } +} + +module shaft(){ + spring_guide_length = SHAFT_X-SHAFT_THICKNESS-SHAFT_SPRING_HOLDER_WIDTH; + spring_guide_height = SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_LARGE_SLOT_TO_BASE; + translate([0,0,-SHAFT_LENGTH]) difference(){ + union(){ + difference(){ + union(){ + difference(){ + intersection(){ + cylinder(h=100,r=SHAFT_X/2,$fs=0.3); + translate([-SHAFT_X/2,-SHAFT_Y/2,0]) cube([SHAFT_X,SHAFT_Y,100]); + } + intersection(){ + cylinder(h=100,r=SHAFT_X/2-SHAFT_THICKNESS,$fs=0.3); + translate([-SHAFT_X/2+SHAFT_THICKNESS,-SHAFT_Y/2+SHAFT_THICKNESS,0]) cube([SHAFT_X-2*SHAFT_THICKNESS,SHAFT_Y-2*SHAFT_THICKNESS,100]); + } + } + translate([-SHAFT_CLIP_WIDTH/2, -SHAFT_CLIP_THICKNESS-SHAFT_Y/2,0]) cube([SHAFT_CLIP_WIDTH/2, SHAFT_CLIP_THICKNESS,SHAFT_CLIP_HEIGHT]); + translate([-SHAFT_CLIP_WIDTH/2, SHAFT_Y/2,0]) cube([SHAFT_CLIP_WIDTH/2, SHAFT_CLIP_THICKNESS,SHAFT_CLIP_HEIGHT]); + } + translate([-SHAFT_CLIP_WIDTH/2, -SHAFT_CLIP_THICKNESS-SHAFT_Y/2+SHAFT_CLIP_SLOPE_DEPTH,0]) rotate(a=90+SHAFT_CLIP_ANGLE,v=[1,0,0]) cube([SHAFT_CLIP_WIDTH/2,100,100]); + translate([-SHAFT_CLIP_WIDTH/2, SHAFT_Y/2+SHAFT_CLIP_THICKNESS-SHAFT_CLIP_SLOPE_DEPTH,0]) mirror([0,1,0]) rotate(a=90+SHAFT_CLIP_ANGLE,v=[1,0,0]) cube([SHAFT_CLIP_WIDTH/2,100,100]); + translate([0,-50,0]) cube([100,100,SHAFT_END_CUTOUT_HEIGHT]); + translate([0,-SHAFT_Y/2+SHAFT_THICKNESS,0]) cube([100,SHAFT_Y-SHAFT_THICKNESS*2,SHAFT_LENGTH+SHAFT_LARGE_SLOT_TO_BASE]); + //small slot cutout + translate([0,-SHAFT_SMALL_SLOT_WIDTH/2,0]){ + mirror([1,0,0]) cube([100,SHAFT_SMALL_SLOT_WIDTH,SHAFT_SMALL_SLOT_LENGTH-0.5*SHAFT_SMALL_SLOT_WIDTH]); + } + //small slot cutout + translate([0,0,SHAFT_SMALL_SLOT_LENGTH-0.5*SHAFT_SMALL_SLOT_WIDTH]) rotate(a=-90,v=[0,1,0]) cylinder(r=SHAFT_SMALL_SLOT_WIDTH/2,h=SHAFT_X/2,$fs=0.3); + } + //spring holder + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3); + intersection(){ + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3); + translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100); + } + intersection(){ + difference(){ + translate([SHAFT_X/2-SHAFT_THICKNESS,-0.5*SHAFT_SPRING_GUIDE_WIDTH,SHAFT_LENGTH+SHAFT_LARGE_SLOT_TO_BASE]) mirror([1,0,0]) cube([100,SHAFT_SPRING_GUIDE_WIDTH,100]); + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH+SHAFT_THICKNESS,-0.5*SHAFT_SPRING_GUIDE_WIDTH,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) + mirror([1,0,0]) rotate(a=90-asin(spring_guide_height/spring_guide_length),v=[0,1,0]) mirror([0,0,1]) translate([0,0,-50]) cube([100,SHAFT_SPRING_GUIDE_WIDTH,100]); + } + cube([SHAFT_X-SHAFT_THICKNESS,SHAFT_Y,100],center=true); + } + //side spring guides + difference(){ + translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_Y/2+SHAFT_THICKNESS,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_GUIDE_SIDES_HEIGHT]) cube([SHAFT_SPRING_GUIDE_WIDTH,SHAFT_Y-2*SHAFT_THICKNESS,EZ-SHAFT_SPRING_HOLDER_TO_BASE+SHAFT_SPRING_GUIDE_SIDES_HEIGHT]); + translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_SPRING_HOLDER_WIDTH/2,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) rotate(a=-asin(((SHAFT_Y-SHAFT_SPRING_HOLDER_WIDTH)/2-SHAFT_THICKNESS)/SHAFT_SPRING_GUIDE_SIDES_HEIGHT),v=[1,0,0]) translate([0,0,-50]) cube([SHAFT_SPRING_GUIDE_WIDTH,100,100]); + } + difference(){ + translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_Y/2+SHAFT_THICKNESS,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_GUIDE_SIDES_HEIGHT]) cube([SHAFT_SPRING_GUIDE_WIDTH,SHAFT_Y-2*SHAFT_THICKNESS,EZ-SHAFT_SPRING_HOLDER_TO_BASE+SHAFT_SPRING_GUIDE_SIDES_HEIGHT]); + mirror([0,1,0]) translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_SPRING_HOLDER_WIDTH/2,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) rotate(a=-asin(((SHAFT_Y-SHAFT_SPRING_HOLDER_WIDTH)/2-SHAFT_THICKNESS)/SHAFT_SPRING_GUIDE_SIDES_HEIGHT),v=[1,0,0]) translate([0,0,-50]) cube([SHAFT_SPRING_GUIDE_WIDTH,100,100]); + } + } + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH+SHAFT_THICKNESS,-SHAFT_Y/2+SHAFT_THICKNESS,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) mirror([1,0,0]) rotate(a=90-asin(spring_guide_height/spring_guide_length),v=[0,1,0]) mirror([0,0,1]) cube([SHAFT_THICKNESS,SHAFT_Y-2*SHAFT_THICKNESS,100]); + } +} + +module guard(){ + difference(){ + union(){ + cube([100,STRUT_THICKNESS,100],center=true); + cylinder(r=OUTER_GUARD_RADIUS,h=100); + } + difference(){ + cylinder(r=INNER_GUARD_RADIUS,h=100); + translate([-STRUT_SPACING/2-STRUT_THICKNESS,-50,EZ-STRUT_HEIGHT]) cube([STRUT_THICKNESS,100,STRUT_HEIGHT]); + translate([STRUT_SPACING/2,-50,EZ-STRUT_HEIGHT]) cube([STRUT_THICKNESS,100,STRUT_HEIGHT]); + translate([-50,-STRUT_SPACING/2-STRUT_THICKNESS,EZ-STRUT_HEIGHT]) cube([100,STRUT_THICKNESS,STRUT_HEIGHT]); + translate([-50,STRUT_SPACING/2,EZ-STRUT_HEIGHT]) cube([100,STRUT_THICKNESS,STRUT_HEIGHT]); + } + } +} + +difference(){ + keycap(); + difference(){ + translate([WallThickness, WallThickness, 0]) scale(v=[1-2*WallThickness/AX, 1-2*WallThickness/AY, 1-WallThickness/H]) keycap(); + translate([OUTER_GUARD_RADIUS+WallThickness,0,0]){ + translate([0,SHAFT_OFF_Y]) guard(); + translate([0,BLIND_SHAFT_OFF_Y]) guard(); + difference(){ + cube([STRUT_THICKNESS,100,100],center=true); + translate([0,SHAFT_OFF_Y]) cube([100,2*OUTER_GUARD_RADIUS,100],center=true); + translate([0,BLIND_SHAFT_OFF_Y]) cube([100,2*OUTER_GUARD_RADIUS,100],center=true); + } + } + } +} +intersection(){ + union(){ + translate([WallThickness, WallThickness, 0]) scale(v=[1-2*WallThickness/AX, 1-2*WallThickness/AY, 1-WallThickness/H]) keycap(); + translate([-50,-50,-99.9]) cube([100,100,100]); + } + translate([OUTER_GUARD_RADIUS+WallThickness,0,0]){ + translate([0,SHAFT_OFF_Y]) shaft(); + translate([0,BLIND_SHAFT_OFF_Y]) blind_shaft(); + } +} diff --git a/key-std.scad b/key-std.scad new file mode 100644 index 0000000..ac3388a --- /dev/null +++ b/key-std.scad @@ -0,0 +1,186 @@ +//measures are in millimeters +//(feel free to cocnvert them to attoparsecs) +WallThickness=0.75; +AY=18.5; +AX=19.0; +BY=12.5; +BLX=14.5; +EZ=11.0; +FLZ=14.0; +H=12.75; +CYL_OFF_Z=50; +CYL_DEPTH=0.1; +CLIP_X=2; +CLIP_Y=0.75; +CLIP_H=3*CLIP_Y; +CORNER_RADIUS=2; +SHAFT_OFF_Y=(AY-2*WallThickness)/2; +INNER_GUARD_RADIUS=6.5; +OUTER_GUARD_RADIUS=7.5; +BLIND_SHAFT_OUTER_DIAMETER=4.0; +BLIND_SHAFT_INNER_DIAMETER=2.0; +SHAFT_X=8.0; +SHAFT_Y=6.0; +SHAFT_LENGTH=9.0; +SHAFT_THICKNESS=1.0; +SHAFT_CLIP_WIDTH=3.0; +SHAFT_CLIP_THICKNESS=0.75; +SHAFT_CLIP_HEIGHT=2.0; +SHAFT_CLIP_SLOPE_DEPTH=1.0; +SHAFT_CLIP_ANGLE=45; +SHAFT_END_CUTOUT_HEIGHT=1.5; +SHAFT_LARGE_SLOT_TO_BASE=1.5; +SHAFT_SMALL_SLOT_LENGTH=7.25; +SHAFT_SMALL_SLOT_WIDTH=2.5; +SHAFT_SPRING_HOLDER_WIDTH=3.0; +SHAFT_SPRING_HOLDER_TO_BASE=4.0; +SHAFT_SPRING_GUIDE_WIDTH=1.0; +SHAFT_SPRING_GUIDE_SIDES_HEIGHT=3.5; +STRUT_THICKNESS=1; +STRUT_HEIGHT=3; +STRUT_SPACING=1; +SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT=1; +SHAFT_SPRING_HOLDER_NIPPLE_RADIUS=0.75; +SHAFT_SMALL_SLOT_BEVEL=0.5; + +CLIP_NOTCH_DEPTH=1.0; +CLIP_NOTCH_WIDTH=3.0; +CLIP_NOTCH_HEIGHT=1.5; + +ClipWidth=2.2; +ClipDepth=0.75; + +//ascfront=FLZ/sqrt(pow(FLZ,2)-pow(H,2)); +//asctop=(H-EZ)/sqrt(pow(BLX,2)-pow((H-EZ),2)); + +alpha=asin((H-EZ)/BLX); +beta=asin(H/FLZ); +gamma=90-asin((0.5*(AY-BY))/EZ); + +module keycap(){ + scale([AX/(AX+2*CORNER_RADIUS),AY/(AY+2*CORNER_RADIUS),1]) + translate([CORNER_RADIUS,CORNER_RADIUS,0.01]) + minkowski(){ + difference(){ + cube([AX,AY,H]); + rotate(a=gamma,v=[1,0,0]) cube([100,100,100]); + translate([0,AY,0]) rotate(a=90-gamma,v=[1,0,0]) cube([100,100,100]); + translate([0,0,EZ]) rotate(a=-alpha,v=[0,1,0]) translate([-50,0,0]) cube([100,100,100]); + translate([0,AY/2,EZ+CYL_OFF_Z]) rotate(a=90-alpha,v=[0,1,0]) cylinder(h=100,center=true,r=CYL_OFF_Z+CYL_DEPTH,$fa=1); + translate([AX,0,0]) rotate(a=beta-90,v=[0,1,0]) cube([100,100,100]); + } + cylinder(h=0.01,r=CORNER_RADIUS,$fs=0.6); + //rotate(a=90,v=[1,0,0]) cylinder(h=0.01,r=1,$fs=0.3); + } +} + +module blind_shaft(){ + translate([0,0,-SHAFT_LENGTH]) difference(){ + cylinder(r=BLIND_SHAFT_OUTER_DIAMETER/2,h=100,$fs=0.3); + cylinder(r=BLIND_SHAFT_INNER_DIAMETER/2,h=100,$fs=0.3); + } +} + +module shaft(){ + spring_guide_length = SHAFT_X-SHAFT_THICKNESS-SHAFT_SPRING_HOLDER_WIDTH; + spring_guide_height = SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_LARGE_SLOT_TO_BASE; + translate([0,0,-SHAFT_LENGTH]) difference(){ + union(){ + difference(){ + union(){ + difference(){ + intersection(){ + cylinder(h=100,r=SHAFT_X/2,$fs=0.3); + translate([-SHAFT_X/2,-SHAFT_Y/2,0]) cube([SHAFT_X,SHAFT_Y,100]); + } + intersection(){ + cylinder(h=100,r=SHAFT_X/2-SHAFT_THICKNESS,$fs=0.3); + translate([-SHAFT_X/2+SHAFT_THICKNESS,-SHAFT_Y/2+SHAFT_THICKNESS,0]) cube([SHAFT_X-2*SHAFT_THICKNESS,SHAFT_Y-2*SHAFT_THICKNESS,100]); + } + } + translate([-SHAFT_CLIP_WIDTH/2, -SHAFT_CLIP_THICKNESS-SHAFT_Y/2,0]) cube([SHAFT_CLIP_WIDTH/2, SHAFT_CLIP_THICKNESS,SHAFT_CLIP_HEIGHT]); + translate([-SHAFT_CLIP_WIDTH/2, SHAFT_Y/2,0]) cube([SHAFT_CLIP_WIDTH/2, SHAFT_CLIP_THICKNESS,SHAFT_CLIP_HEIGHT]); + } + translate([-SHAFT_CLIP_WIDTH/2, -SHAFT_CLIP_THICKNESS-SHAFT_Y/2+SHAFT_CLIP_SLOPE_DEPTH,0]) rotate(a=90+SHAFT_CLIP_ANGLE,v=[1,0,0]) cube([SHAFT_CLIP_WIDTH/2,100,100]); + translate([-SHAFT_CLIP_WIDTH/2, SHAFT_Y/2+SHAFT_CLIP_THICKNESS-SHAFT_CLIP_SLOPE_DEPTH,0]) mirror([0,1,0]) rotate(a=90+SHAFT_CLIP_ANGLE,v=[1,0,0]) cube([SHAFT_CLIP_WIDTH/2,100,100]); + translate([0,-50,0]) cube([100,100,SHAFT_END_CUTOUT_HEIGHT]); + translate([0,-SHAFT_Y/2+SHAFT_THICKNESS,0]) cube([100,SHAFT_Y-SHAFT_THICKNESS*2,SHAFT_LENGTH+SHAFT_LARGE_SLOT_TO_BASE]); + //small slot cutout + translate([0,-SHAFT_SMALL_SLOT_WIDTH/2,0]){ + mirror([1,0,0]) cube([100,SHAFT_SMALL_SLOT_WIDTH,SHAFT_SMALL_SLOT_LENGTH-0.5*SHAFT_SMALL_SLOT_WIDTH]); + } + //small slot cutout + translate([0,0,SHAFT_SMALL_SLOT_LENGTH-0.5*SHAFT_SMALL_SLOT_WIDTH]) rotate(a=-90,v=[0,1,0]) cylinder(r=SHAFT_SMALL_SLOT_WIDTH/2,h=SHAFT_X/2,$fs=0.3); + } + //spring holder + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3); + intersection(){ + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3); + translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100); + } + intersection(){ + difference(){ + translate([SHAFT_X/2-SHAFT_THICKNESS,-0.5*SHAFT_SPRING_GUIDE_WIDTH,SHAFT_LENGTH+SHAFT_LARGE_SLOT_TO_BASE]) mirror([1,0,0]) cube([100,SHAFT_SPRING_GUIDE_WIDTH,100]); + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH+SHAFT_THICKNESS,-0.5*SHAFT_SPRING_GUIDE_WIDTH,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) + mirror([1,0,0]) rotate(a=90-asin(spring_guide_height/spring_guide_length),v=[0,1,0]) mirror([0,0,1]) translate([0,0,-50]) cube([100,SHAFT_SPRING_GUIDE_WIDTH,100]); + } + cube([SHAFT_X-SHAFT_THICKNESS,SHAFT_Y,100],center=true); + } + //side spring guides + difference(){ + translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_Y/2+SHAFT_THICKNESS,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_GUIDE_SIDES_HEIGHT]) cube([SHAFT_SPRING_GUIDE_WIDTH,SHAFT_Y-2*SHAFT_THICKNESS,EZ-SHAFT_SPRING_HOLDER_TO_BASE+SHAFT_SPRING_GUIDE_SIDES_HEIGHT]); + translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_SPRING_HOLDER_WIDTH/2,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) rotate(a=-asin(((SHAFT_Y-SHAFT_SPRING_HOLDER_WIDTH)/2-SHAFT_THICKNESS)/SHAFT_SPRING_GUIDE_SIDES_HEIGHT),v=[1,0,0]) translate([0,0,-50]) cube([SHAFT_SPRING_GUIDE_WIDTH,100,100]); + } + difference(){ + translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_Y/2+SHAFT_THICKNESS,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_GUIDE_SIDES_HEIGHT]) cube([SHAFT_SPRING_GUIDE_WIDTH,SHAFT_Y-2*SHAFT_THICKNESS,EZ-SHAFT_SPRING_HOLDER_TO_BASE+SHAFT_SPRING_GUIDE_SIDES_HEIGHT]); + mirror([0,1,0]) translate([-SHAFT_X/2+SHAFT_THICKNESS+(SHAFT_SPRING_HOLDER_WIDTH-SHAFT_SPRING_GUIDE_WIDTH)/2,-SHAFT_SPRING_HOLDER_WIDTH/2,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) rotate(a=-asin(((SHAFT_Y-SHAFT_SPRING_HOLDER_WIDTH)/2-SHAFT_THICKNESS)/SHAFT_SPRING_GUIDE_SIDES_HEIGHT),v=[1,0,0]) translate([0,0,-50]) cube([SHAFT_SPRING_GUIDE_WIDTH,100,100]); + } + } + translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH+SHAFT_THICKNESS,-SHAFT_Y/2+SHAFT_THICKNESS,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) mirror([1,0,0]) rotate(a=90-asin(spring_guide_height/spring_guide_length),v=[0,1,0]) mirror([0,0,1]) cube([SHAFT_THICKNESS,SHAFT_Y-2*SHAFT_THICKNESS,100]); + } +} + +module guard(){ + difference(){ + union(){ + cube([100,STRUT_THICKNESS,100],center=true); + cylinder(r=OUTER_GUARD_RADIUS,h=100); + } + difference(){ + cylinder(r=INNER_GUARD_RADIUS,h=100); + translate([-STRUT_SPACING/2-STRUT_THICKNESS,-50,EZ-STRUT_HEIGHT]) cube([STRUT_THICKNESS,100,STRUT_HEIGHT]); + translate([STRUT_SPACING/2,-50,EZ-STRUT_HEIGHT]) cube([STRUT_THICKNESS,100,STRUT_HEIGHT]); + translate([-50,-STRUT_SPACING/2-STRUT_THICKNESS,EZ-STRUT_HEIGHT]) cube([100,STRUT_THICKNESS,STRUT_HEIGHT]); + translate([-50,STRUT_SPACING/2,EZ-STRUT_HEIGHT]) cube([100,STRUT_THICKNESS,STRUT_HEIGHT]); + } + } +} + +difference(){ + scale(v=[1-2*WallThickness/AX, 1-2*WallThickness/AY, 1-WallThickness/H]) keycap(); + difference(){ + translate([WallThickness, WallThickness, 0]) scale(v=[1-4*WallThickness/AX, 1-4*WallThickness/AY, 1-2*WallThickness/H]) keycap(); + translate([OUTER_GUARD_RADIUS,0,0]){ + translate([0,SHAFT_OFF_Y]) guard(); + difference(){ + cube([CLIP_NOTCH_WIDTH+2*WallThickness,100,100],center=true); + translate([0,SHAFT_OFF_Y]) cube([100,2*OUTER_GUARD_RADIUS-WallThickness,100],center=true); + } + } + } + + translate([OUTER_GUARD_RADIUS-CLIP_NOTCH_WIDTH/2,0,0]){ + cube([CLIP_NOTCH_WIDTH,CLIP_NOTCH_DEPTH,CLIP_NOTCH_HEIGHT]); + translate([0,AY-2*WallThickness-CLIP_NOTCH_DEPTH,0]) cube([CLIP_NOTCH_WIDTH,CLIP_NOTCH_DEPTH,CLIP_NOTCH_HEIGHT]); + } +} + +intersection(){ + union(){ + translate([WallThickness, WallThickness, 0]) scale(v=[1-4*WallThickness/AX, 1-4*WallThickness/AY, 1-2*WallThickness/H]) keycap(); + translate([-50,-50,-99.9]) cube([100,100,100]); + } + translate([OUTER_GUARD_RADIUS,0,0]){ + translate([0,SHAFT_OFF_Y]) shaft(); + } +} -- 2.11.4.GIT