src/config/CYCLONEF722_PRO/config.h

   1 /*
   2  * This file is part of Betaflight.
   3  *
   4  * Betaflight is free software. You can redistribute this software
   5  * and/or modify this software under the terms of the GNU General
   6  * Public License as published by the Free Software Foundation,
   7  * either version 3 of the License, or (at your option) any later
   8  * version.
   9  *
  10  * Betaflight is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  13  *
  14  * See the GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public
  17  * License along with this software.
  18  *
  19  * If not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 /*
  23    This file has been auto generated from unified-targets repo.
  24
  25    The auto generation is transitional only, please remove this comment once the file is edited.
  26 */
  27
  28 #define FC_TARGET_MCU     STM32F7X2
  29
  30 #define BOARD_NAME        CYCLONEF722_PRO
  31 #define MANUFACTURER_ID   CYCL
  32
  33 #define USE_GYRO_SPI_MPU6000
  34 #define USE_ACC_SPI_MPU6000
  35 #define USE_BARO_BMP280
  36 #define USE_FLASH_W25P16
  37 #define USE_FLASH_W25Q128FV
  38 #define USE_MAX7456
  39
  40 #define BEEPER_PIN           PC13
  41 #define MOTOR1_PIN           PC8
  42 #define MOTOR2_PIN           PC9
  43 #define MOTOR3_PIN           PA8
  44 #define MOTOR4_PIN           PA9
  45 #define MOTOR5_PIN           PB0
  46 #define MOTOR6_PIN           PB1
  47 #define MOTOR7_PIN           PA10
  48 #define MOTOR8_PIN           PB4
  49 #define LED_STRIP_PIN        PB3
  50 #define UART1_TX_PIN         PB6
  51 #define UART2_TX_PIN         PA2
  52 #define UART3_TX_PIN         PB10
  53 #define UART4_TX_PIN         PA0
  54 #define UART5_TX_PIN         PC12
  55 #define UART6_TX_PIN         PC6
  56 #define UART1_RX_PIN         PB7
  57 #define UART2_RX_PIN         PA3
  58 #define UART3_RX_PIN         PB11
  59 #define UART4_RX_PIN         PA1
  60 #define UART5_RX_PIN         PD2
  61 #define UART6_RX_PIN         PC7
  62 #define I2C1_SCL_PIN         PB8
  63 #define I2C1_SDA_PIN         PB9
  64 #define LED0_PIN             PC15
  65 #define SPI1_SCK_PIN         PA5
  66 #define SPI2_SCK_PIN         PB13
  67 #define SPI3_SCK_PIN         PC10
  68 #define SPI1_MISO_PIN        PA6
  69 #define SPI2_MISO_PIN        PB14
  70 #define SPI3_MISO_PIN        PC11
  71 #define SPI1_MOSI_PIN        PA7
  72 #define SPI2_MOSI_PIN        PB15
  73 #define SPI3_MOSI_PIN        PB5
  74 #define ADC_VBAT_PIN         PC1
  75 #define ADC_RSSI_PIN         PC2
  76 #define ADC_CURR_PIN         PC3
  77 #define PINIO1_PIN           PB0
  78 #define FLASH_CS_PIN         PA15
  79 #define MAX7456_SPI_CS_PIN   PB12
  80 #define GYRO_1_EXTI_PIN      PC4
  81 #define GYRO_1_CS_PIN        PA4
  82
  83 #define TIMER_PIN_MAPPING \
  84     TIMER_PIN_MAP( 0, PB9 , 2, -1) \
  85     TIMER_PIN_MAP( 1, PA9 , 1,  0) \
  86     TIMER_PIN_MAP( 2, PA8 , 1,  0) \
  87     TIMER_PIN_MAP( 3, PC9 , 2,  0) \
  88     TIMER_PIN_MAP( 4, PC8 , 2,  0) \
  89     TIMER_PIN_MAP( 5, PB8 , 1,  0) \
  90     TIMER_PIN_MAP( 6, PB3 , 1,  0) \
  91     TIMER_PIN_MAP( 7, PB0 , 2,  0) \
  92     TIMER_PIN_MAP( 8, PB1 , 2,  0) \
  93     TIMER_PIN_MAP( 9, PA10, 1,  0) \
  94     TIMER_PIN_MAP(10, PB4 , 1,  0)
  95
  96
  97
  98 #define ADC3_DMA_OPT        0
  99
 100 //TODO #define MAG_BUSTYPE I2C
 101 #define MAG_I2C_INSTANCE (I2CDEV_1)
 102 //TODO #define BARO_BUSTYPE I2C
 103 #define BARO_I2C_INSTANCE (I2CDEV_1)
 104 //TODO #define SERIALRX_PROVIDER SBUS
 105 //TODO #define ADC_DEVICE 3
 106 //TODO #define BLACKBOX_DEVICE SPIFLASH
 107 //TODO #define DSHOT_BURST ON
 108 //TODO #define CURRENT_METER ADC
 109 //TODO #define BATTERY_METER ADC
 110 #define BEEPER_INVERTED
 111 //TODO #define BEEPER_OD OFF
 112 //TODO #define OSD_DISPLAYPORT_DEVICE MAX7456
 113 #define MAX7456_SPI_INSTANCE SPI2
 114 //TODO #define PINIO_CONFIG 129,1,1,1
 115 //TODO #define PINIO_BOX 0,255,255,255
 116 #define FLASH_SPI_INSTANCE SPI3
 117 #define USE_SPI_GYRO
 118 #define GYRO_1_SPI_INSTANCE SPI1
 119 #define GYRO_1_ALIGN CW90_DEG
 120 #define GYRO_1_ALIGN_YAW 900