gdb/rl78-tdep.c

   1 /* Target-dependent code for the Renesas RL78 for GDB, the GNU debugger.
   2
   3    Copyright (C) 2011-2022 Free Software Foundation, Inc.
   4
   5    Contributed by Red Hat, Inc.
   6
   7    This file is part of GDB.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  21
  22 #include "defs.h"
  23 #include "arch-utils.h"
  24 #include "prologue-value.h"
  25 #include "target.h"
  26 #include "regcache.h"
  27 #include "opcode/rl78.h"
  28 #include "dis-asm.h"
  29 #include "gdbtypes.h"
  30 #include "frame.h"
  31 #include "frame-unwind.h"
  32 #include "frame-base.h"
  33 #include "value.h"
  34 #include "gdbcore.h"
  35 #include "dwarf2/frame.h"
  36 #include "reggroups.h"
  37 #include "gdbarch.h"
  38
  39 #include "elf/rl78.h"
  40 #include "elf-bfd.h"
  41
  42 /* Register Banks.  */
  43
  44 enum
  45 {
  46   RL78_BANK0 = 0,
  47   RL78_BANK1 = 1,
  48   RL78_BANK2 = 2,
  49   RL78_BANK3 = 3,
  50   RL78_NUMBANKS = 4,
  51   RL78_REGS_PER_BANK = 8
  52 };
  53
  54 /* Register Numbers.  */
  55
  56 enum
  57 {
  58   /* All general purpose registers are 8 bits wide.  */
  59   RL78_RAW_BANK0_R0_REGNUM = 0,
  60   RL78_RAW_BANK0_R1_REGNUM,
  61   RL78_RAW_BANK0_R2_REGNUM,
  62   RL78_RAW_BANK0_R3_REGNUM,
  63   RL78_RAW_BANK0_R4_REGNUM,
  64   RL78_RAW_BANK0_R5_REGNUM,
  65   RL78_RAW_BANK0_R6_REGNUM,
  66   RL78_RAW_BANK0_R7_REGNUM,
  67
  68   RL78_RAW_BANK1_R0_REGNUM,
  69   RL78_RAW_BANK1_R1_REGNUM,
  70   RL78_RAW_BANK1_R2_REGNUM,
  71   RL78_RAW_BANK1_R3_REGNUM,
  72   RL78_RAW_BANK1_R4_REGNUM,
  73   RL78_RAW_BANK1_R5_REGNUM,
  74   RL78_RAW_BANK1_R6_REGNUM,
  75   RL78_RAW_BANK1_R7_REGNUM,
  76
  77   RL78_RAW_BANK2_R0_REGNUM,
  78   RL78_RAW_BANK2_R1_REGNUM,
  79   RL78_RAW_BANK2_R2_REGNUM,
  80   RL78_RAW_BANK2_R3_REGNUM,
  81   RL78_RAW_BANK2_R4_REGNUM,
  82   RL78_RAW_BANK2_R5_REGNUM,
  83   RL78_RAW_BANK2_R6_REGNUM,
  84   RL78_RAW_BANK2_R7_REGNUM,
  85
  86   RL78_RAW_BANK3_R0_REGNUM,
  87   RL78_RAW_BANK3_R1_REGNUM,
  88   RL78_RAW_BANK3_R2_REGNUM,
  89   RL78_RAW_BANK3_R3_REGNUM,
  90   RL78_RAW_BANK3_R4_REGNUM,
  91   RL78_RAW_BANK3_R5_REGNUM,
  92   RL78_RAW_BANK3_R6_REGNUM,
  93   RL78_RAW_BANK3_R7_REGNUM,
  94
  95   RL78_PSW_REGNUM,      /* 8 bits */
  96   RL78_ES_REGNUM,       /* 8 bits */
  97   RL78_CS_REGNUM,       /* 8 bits */
  98   RL78_RAW_PC_REGNUM,   /* 20 bits; we'll use 32 bits for it.  */
  99
 100   /* Fixed address SFRs (some of those above are SFRs too.) */
 101   RL78_SPL_REGNUM,      /* 8 bits; lower half of SP */
 102   RL78_SPH_REGNUM,      /* 8 bits; upper half of SP */
 103   RL78_PMC_REGNUM,      /* 8 bits */
 104   RL78_MEM_REGNUM,      /* 8 bits ?? */
 105
 106   RL78_NUM_REGS,
 107
 108   /* Pseudo registers.  */
 109   RL78_PC_REGNUM = RL78_NUM_REGS,
 110   RL78_SP_REGNUM,
 111
 112   RL78_X_REGNUM,
 113   RL78_A_REGNUM,
 114   RL78_C_REGNUM,
 115   RL78_B_REGNUM,
 116   RL78_E_REGNUM,
 117   RL78_D_REGNUM,
 118   RL78_L_REGNUM,
 119   RL78_H_REGNUM,
 120
 121   RL78_AX_REGNUM,
 122   RL78_BC_REGNUM,
 123   RL78_DE_REGNUM,
 124   RL78_HL_REGNUM,
 125
 126   RL78_BANK0_R0_REGNUM,
 127   RL78_BANK0_R1_REGNUM,
 128   RL78_BANK0_R2_REGNUM,
 129   RL78_BANK0_R3_REGNUM,
 130   RL78_BANK0_R4_REGNUM,
 131   RL78_BANK0_R5_REGNUM,
 132   RL78_BANK0_R6_REGNUM,
 133   RL78_BANK0_R7_REGNUM,
 134
 135   RL78_BANK1_R0_REGNUM,
 136   RL78_BANK1_R1_REGNUM,
 137   RL78_BANK1_R2_REGNUM,
 138   RL78_BANK1_R3_REGNUM,
 139   RL78_BANK1_R4_REGNUM,
 140   RL78_BANK1_R5_REGNUM,
 141   RL78_BANK1_R6_REGNUM,
 142   RL78_BANK1_R7_REGNUM,
 143
 144   RL78_BANK2_R0_REGNUM,
 145   RL78_BANK2_R1_REGNUM,
 146   RL78_BANK2_R2_REGNUM,
 147   RL78_BANK2_R3_REGNUM,
 148   RL78_BANK2_R4_REGNUM,
 149   RL78_BANK2_R5_REGNUM,
 150   RL78_BANK2_R6_REGNUM,
 151   RL78_BANK2_R7_REGNUM,
 152
 153   RL78_BANK3_R0_REGNUM,
 154   RL78_BANK3_R1_REGNUM,
 155   RL78_BANK3_R2_REGNUM,
 156   RL78_BANK3_R3_REGNUM,
 157   RL78_BANK3_R4_REGNUM,
 158   RL78_BANK3_R5_REGNUM,
 159   RL78_BANK3_R6_REGNUM,
 160   RL78_BANK3_R7_REGNUM,
 161
 162   RL78_BANK0_RP0_REGNUM,
 163   RL78_BANK0_RP1_REGNUM,
 164   RL78_BANK0_RP2_REGNUM,
 165   RL78_BANK0_RP3_REGNUM,
 166
 167   RL78_BANK1_RP0_REGNUM,
 168   RL78_BANK1_RP1_REGNUM,
 169   RL78_BANK1_RP2_REGNUM,
 170   RL78_BANK1_RP3_REGNUM,
 171
 172   RL78_BANK2_RP0_REGNUM,
 173   RL78_BANK2_RP1_REGNUM,
 174   RL78_BANK2_RP2_REGNUM,
 175   RL78_BANK2_RP3_REGNUM,
 176
 177   RL78_BANK3_RP0_REGNUM,
 178   RL78_BANK3_RP1_REGNUM,
 179   RL78_BANK3_RP2_REGNUM,
 180   RL78_BANK3_RP3_REGNUM,
 181
 182   /* These are the same as the above 16 registers, but have
 183      a pointer type for use as base registers in expression
 184      evaluation.  These are not user visible registers.  */
 185   RL78_BANK0_RP0_PTR_REGNUM,
 186   RL78_BANK0_RP1_PTR_REGNUM,
 187   RL78_BANK0_RP2_PTR_REGNUM,
 188   RL78_BANK0_RP3_PTR_REGNUM,
 189
 190   RL78_BANK1_RP0_PTR_REGNUM,
 191   RL78_BANK1_RP1_PTR_REGNUM,
 192   RL78_BANK1_RP2_PTR_REGNUM,
 193   RL78_BANK1_RP3_PTR_REGNUM,
 194
 195   RL78_BANK2_RP0_PTR_REGNUM,
 196   RL78_BANK2_RP1_PTR_REGNUM,
 197   RL78_BANK2_RP2_PTR_REGNUM,
 198   RL78_BANK2_RP3_PTR_REGNUM,
 199
 200   RL78_BANK3_RP0_PTR_REGNUM,
 201   RL78_BANK3_RP1_PTR_REGNUM,
 202   RL78_BANK3_RP2_PTR_REGNUM,
 203   RL78_BANK3_RP3_PTR_REGNUM,
 204
 205   RL78_NUM_TOTAL_REGS,
 206   RL78_NUM_PSEUDO_REGS = RL78_NUM_TOTAL_REGS - RL78_NUM_REGS
 207 };
 208
 209 #define RL78_SP_ADDR 0xffff8
 210
 211 /* Architecture specific data.  */
 212
 213 struct rl78_gdbarch_tdep : gdbarch_tdep
 214 {
 215   /* The ELF header flags specify the multilib used.  */
 216   int elf_flags = 0;
 217
 218   struct type *rl78_void = nullptr,
 219               *rl78_uint8 = nullptr,
 220               *rl78_int8 = nullptr,
 221               *rl78_uint16 = nullptr,
 222               *rl78_int16 = nullptr,
 223               *rl78_uint32 = nullptr,
 224               *rl78_int32 = nullptr,
 225               *rl78_data_pointer = nullptr,
 226               *rl78_code_pointer = nullptr,
 227               *rl78_psw_type = nullptr;
 228 };
 229
 230 /* This structure holds the results of a prologue analysis.  */
 231
 232 struct rl78_prologue
 233 {
 234   /* The offset from the frame base to the stack pointer --- always
 235      zero or negative.
 236
 237      Calling this a "size" is a bit misleading, but given that the
 238      stack grows downwards, using offsets for everything keeps one
 239      from going completely sign-crazy: you never change anything's
 240      sign for an ADD instruction; always change the second operand's
 241      sign for a SUB instruction; and everything takes care of
 242      itself.  */
 243   int frame_size;
 244
 245   /* Non-zero if this function has initialized the frame pointer from
 246      the stack pointer, zero otherwise.  */
 247   int has_frame_ptr;
 248
 249   /* If has_frame_ptr is non-zero, this is the offset from the frame
 250      base to where the frame pointer points.  This is always zero or
 251      negative.  */
 252   int frame_ptr_offset;
 253
 254   /* The address of the first instruction at which the frame has been
 255      set up and the arguments are where the debug info says they are
 256      --- as best as we can tell.  */
 257   CORE_ADDR prologue_end;
 258
 259   /* reg_offset[R] is the offset from the CFA at which register R is
 260      saved, or 1 if register R has not been saved.  (Real values are
 261      always zero or negative.)  */
 262   int reg_offset[RL78_NUM_TOTAL_REGS];
 263 };
 264
 265 /* Construct type for PSW register.  */
 266
 267 static struct type *
 268 rl78_psw_type (struct gdbarch *gdbarch)
 269 {
 270   rl78_gdbarch_tdep *tdep = (rl78_gdbarch_tdep *) gdbarch_tdep (gdbarch);
 271
 272   if (tdep->rl78_psw_type == NULL)
 273     {
 274       tdep->rl78_psw_type = arch_flags_type (gdbarch,
 275                                              "builtin_type_rl78_psw", 8);
 276       append_flags_type_flag (tdep->rl78_psw_type, 0, "CY");
 277       append_flags_type_flag (tdep->rl78_psw_type, 1, "ISP0");
 278       append_flags_type_flag (tdep->rl78_psw_type, 2, "ISP1");
 279       append_flags_type_flag (tdep->rl78_psw_type, 3, "RBS0");
 280       append_flags_type_flag (tdep->rl78_psw_type, 4, "AC");
 281       append_flags_type_flag (tdep->rl78_psw_type, 5, "RBS1");
 282       append_flags_type_flag (tdep->rl78_psw_type, 6, "Z");
 283       append_flags_type_flag (tdep->rl78_psw_type, 7, "IE");
 284     }
 285
 286   return tdep->rl78_psw_type;
 287 }
 288
 289 /* Implement the "register_type" gdbarch method.  */
 290
 291 static struct type *
 292 rl78_register_type (struct gdbarch *gdbarch, int reg_nr)
 293 {
 294   rl78_gdbarch_tdep *tdep = (rl78_gdbarch_tdep *) gdbarch_tdep (gdbarch);
 295
 296   if (reg_nr == RL78_PC_REGNUM)
 297     return tdep->rl78_code_pointer;
 298   else if (reg_nr == RL78_RAW_PC_REGNUM)
 299     return tdep->rl78_uint32;
 300   else if (reg_nr == RL78_PSW_REGNUM)
 301     return rl78_psw_type (gdbarch);
 302   else if (reg_nr <= RL78_MEM_REGNUM
 303            || (RL78_X_REGNUM <= reg_nr && reg_nr <= RL78_H_REGNUM)
 304            || (RL78_BANK0_R0_REGNUM <= reg_nr
 305                && reg_nr <= RL78_BANK3_R7_REGNUM))
 306     return tdep->rl78_int8;
 307   else if (reg_nr == RL78_SP_REGNUM
 308            || (RL78_BANK0_RP0_PTR_REGNUM <= reg_nr
 309                && reg_nr <= RL78_BANK3_RP3_PTR_REGNUM))
 310     return tdep->rl78_data_pointer;
 311   else
 312     return tdep->rl78_int16;
 313 }
 314
 315 /* Implement the "register_name" gdbarch method.  */
 316
 317 static const char *
 318 rl78_register_name (struct gdbarch *gdbarch, int regnr)
 319 {
 320   static const char *const reg_names[] =
 321   {
 322     "",         /* bank0_r0 */
 323     "",         /* bank0_r1 */
 324     "",         /* bank0_r2 */
 325     "",         /* bank0_r3 */
 326     "",         /* bank0_r4 */
 327     "",         /* bank0_r5 */
 328     "",         /* bank0_r6 */
 329     "",         /* bank0_r7 */
 330
 331     "",         /* bank1_r0 */
 332     "",         /* bank1_r1 */
 333     "",         /* bank1_r2 */
 334     "",         /* bank1_r3 */
 335     "",         /* bank1_r4 */
 336     "",         /* bank1_r5 */
 337     "",         /* bank1_r6 */
 338     "",         /* bank1_r7 */
 339
 340     "",         /* bank2_r0 */
 341     "",         /* bank2_r1 */
 342     "",         /* bank2_r2 */
 343     "",         /* bank2_r3 */
 344     "",         /* bank2_r4 */
 345     "",         /* bank2_r5 */
 346     "",         /* bank2_r6 */
 347     "",         /* bank2_r7 */
 348
 349     "",         /* bank3_r0 */
 350     "",         /* bank3_r1 */
 351     "",         /* bank3_r2 */
 352     "",         /* bank3_r3 */
 353     "",         /* bank3_r4 */
 354     "",         /* bank3_r5 */
 355     "",         /* bank3_r6 */
 356     "",         /* bank3_r7 */
 357
 358     "psw",
 359     "es",
 360     "cs",
 361     "",
 362
 363     "",         /* spl */
 364     "",         /* sph */
 365     "pmc",
 366     "mem",
 367
 368     "pc",
 369     "sp",
 370
 371     "x",
 372     "a",
 373     "c",
 374     "b",
 375     "e",
 376     "d",
 377     "l",
 378     "h",
 379
 380     "ax",
 381     "bc",
 382     "de",
 383     "hl",
 384
 385     "bank0_r0",
 386     "bank0_r1",
 387     "bank0_r2",
 388     "bank0_r3",
 389     "bank0_r4",
 390     "bank0_r5",
 391     "bank0_r6",
 392     "bank0_r7",
 393
 394     "bank1_r0",
 395     "bank1_r1",
 396     "bank1_r2",
 397     "bank1_r3",
 398     "bank1_r4",
 399     "bank1_r5",
 400     "bank1_r6",
 401     "bank1_r7",
 402
 403     "bank2_r0",
 404     "bank2_r1",
 405     "bank2_r2",
 406     "bank2_r3",
 407     "bank2_r4",
 408     "bank2_r5",
 409     "bank2_r6",
 410     "bank2_r7",
 411
 412     "bank3_r0",
 413     "bank3_r1",
 414     "bank3_r2",
 415     "bank3_r3",
 416     "bank3_r4",
 417     "bank3_r5",
 418     "bank3_r6",
 419     "bank3_r7",
 420
 421     "bank0_rp0",
 422     "bank0_rp1",
 423     "bank0_rp2",
 424     "bank0_rp3",
 425
 426     "bank1_rp0",
 427     "bank1_rp1",
 428     "bank1_rp2",
 429     "bank1_rp3",
 430
 431     "bank2_rp0",
 432     "bank2_rp1",
 433     "bank2_rp2",
 434     "bank2_rp3",
 435
 436     "bank3_rp0",
 437     "bank3_rp1",
 438     "bank3_rp2",
 439     "bank3_rp3",
 440
 441     /* The 16 register slots would be named
 442        bank0_rp0_ptr_regnum ... bank3_rp3_ptr_regnum, but we don't
 443        want these to be user visible registers.  */
 444     "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""
 445   };
 446
 447   return reg_names[regnr];
 448 }
 449
 450 /* Implement the "register_name" gdbarch method for the g10 variant.  */
 451
 452 static const char *
 453 rl78_g10_register_name (struct gdbarch *gdbarch, int regnr)
 454 {
 455   static const char *const reg_names[] =
 456   {
 457     "",         /* bank0_r0 */
 458     "",         /* bank0_r1 */
 459     "",         /* bank0_r2 */
 460     "",         /* bank0_r3 */
 461     "",         /* bank0_r4 */
 462     "",         /* bank0_r5 */
 463     "",         /* bank0_r6 */
 464     "",         /* bank0_r7 */
 465
 466     "",         /* bank1_r0 */
 467     "",         /* bank1_r1 */
 468     "",         /* bank1_r2 */
 469     "",         /* bank1_r3 */
 470     "",         /* bank1_r4 */
 471     "",         /* bank1_r5 */
 472     "",         /* bank1_r6 */
 473     "",         /* bank1_r7 */
 474
 475     "",         /* bank2_r0 */
 476     "",         /* bank2_r1 */
 477     "",         /* bank2_r2 */
 478     "",         /* bank2_r3 */
 479     "",         /* bank2_r4 */
 480     "",         /* bank2_r5 */
 481     "",         /* bank2_r6 */
 482     "",         /* bank2_r7 */
 483
 484     "",         /* bank3_r0 */
 485     "",         /* bank3_r1 */
 486     "",         /* bank3_r2 */
 487     "",         /* bank3_r3 */
 488     "",         /* bank3_r4 */
 489     "",         /* bank3_r5 */
 490     "",         /* bank3_r6 */
 491     "",         /* bank3_r7 */
 492
 493     "psw",
 494     "es",
 495     "cs",
 496     "",
 497
 498     "",         /* spl */
 499     "",         /* sph */
 500     "pmc",
 501     "mem",
 502
 503     "pc",
 504     "sp",
 505
 506     "x",
 507     "a",
 508     "c",
 509     "b",
 510     "e",
 511     "d",
 512     "l",
 513     "h",
 514
 515     "ax",
 516     "bc",
 517     "de",
 518     "hl",
 519
 520     "bank0_r0",
 521     "bank0_r1",
 522     "bank0_r2",
 523     "bank0_r3",
 524     "bank0_r4",
 525     "bank0_r5",
 526     "bank0_r6",
 527     "bank0_r7",
 528
 529     "",
 530     "",
 531     "",
 532     "",
 533     "",
 534     "",
 535     "",
 536     "",
 537
 538     "",
 539     "",
 540     "",
 541     "",
 542     "",
 543     "",
 544     "",
 545     "",
 546
 547     "",
 548     "",
 549     "",
 550     "",
 551     "",
 552     "",
 553     "",
 554     "",
 555
 556     "bank0_rp0",
 557     "bank0_rp1",
 558     "bank0_rp2",
 559     "bank0_rp3",
 560
 561     "",
 562     "",
 563     "",
 564     "",
 565
 566     "",
 567     "",
 568     "",
 569     "",
 570
 571     "",
 572     "",
 573     "",
 574     "",
 575
 576     /* The 16 register slots would be named
 577        bank0_rp0_ptr_regnum ... bank3_rp3_ptr_regnum, but we don't
 578        want these to be user visible registers.  */
 579     "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""
 580   };
 581
 582   return reg_names[regnr];
 583 }
 584
 585 /* Implement the "register_reggroup_p" gdbarch method.  */
 586
 587 static int
 588 rl78_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
 589                           const struct reggroup *group)
 590 {
 591   if (group == all_reggroup)
 592     return 1;
 593
 594   /* All other registers are saved and restored.  */
 595   if (group == save_reggroup || group == restore_reggroup)
 596     {
 597       if ((regnum < RL78_NUM_REGS
 598            && regnum != RL78_SPL_REGNUM
 599            && regnum != RL78_SPH_REGNUM
 600            && regnum != RL78_RAW_PC_REGNUM)
 601           || regnum == RL78_SP_REGNUM
 602           || regnum == RL78_PC_REGNUM)
 603         return 1;
 604       else
 605         return 0;
 606     }
 607
 608   if ((RL78_BANK0_R0_REGNUM <= regnum && regnum <= RL78_BANK3_R7_REGNUM)
 609       || regnum == RL78_ES_REGNUM
 610       || regnum == RL78_CS_REGNUM
 611       || regnum == RL78_SPL_REGNUM
 612       || regnum == RL78_SPH_REGNUM
 613       || regnum == RL78_PMC_REGNUM
 614       || regnum == RL78_MEM_REGNUM
 615       || regnum == RL78_RAW_PC_REGNUM
 616       || (RL78_BANK0_RP0_REGNUM <= regnum && regnum <= RL78_BANK3_RP3_REGNUM))
 617     return group == system_reggroup;
 618
 619   return group == general_reggroup;
 620 }
 621
 622 /* Strip bits to form an instruction address.  (When fetching a
 623    32-bit address from the stack, the high eight bits are garbage.
 624    This function strips off those unused bits.)  */
 625
 626 static CORE_ADDR
 627 rl78_make_instruction_address (CORE_ADDR addr)
 628 {
 629   return addr & 0xffffff;
 630 }
 631
 632 /* Set / clear bits necessary to make a data address.  */
 633
 634 static CORE_ADDR
 635 rl78_make_data_address (CORE_ADDR addr)
 636 {
 637   return (addr & 0xffff) | 0xf0000;
 638 }
 639
 640 /* Implement the "pseudo_register_read" gdbarch method.  */
 641
 642 static enum register_status
 643 rl78_pseudo_register_read (struct gdbarch *gdbarch,
 644                            readable_regcache *regcache,
 645                            int reg, gdb_byte *buffer)
 646 {
 647   enum register_status status;
 648
 649   if (RL78_BANK0_R0_REGNUM <= reg && reg <= RL78_BANK3_R7_REGNUM)
 650     {
 651       int raw_regnum = RL78_RAW_BANK0_R0_REGNUM
 652                        + (reg - RL78_BANK0_R0_REGNUM);
 653
 654       status = regcache->raw_read (raw_regnum, buffer);
 655     }
 656   else if (RL78_BANK0_RP0_REGNUM <= reg && reg <= RL78_BANK3_RP3_REGNUM)
 657     {
 658       int raw_regnum = 2 * (reg - RL78_BANK0_RP0_REGNUM)
 659                        + RL78_RAW_BANK0_R0_REGNUM;
 660
 661       status = regcache->raw_read (raw_regnum, buffer);
 662       if (status == REG_VALID)
 663         status = regcache->raw_read (raw_regnum + 1, buffer + 1);
 664     }
 665   else if (RL78_BANK0_RP0_PTR_REGNUM <= reg && reg <= RL78_BANK3_RP3_PTR_REGNUM)
 666     {
 667       int raw_regnum = 2 * (reg - RL78_BANK0_RP0_PTR_REGNUM)
 668                        + RL78_RAW_BANK0_R0_REGNUM;
 669
 670       status = regcache->raw_read (raw_regnum, buffer);
 671       if (status == REG_VALID)
 672         status = regcache->raw_read (raw_regnum + 1, buffer + 1);
 673     }
 674   else if (reg == RL78_SP_REGNUM)
 675     {
 676       status = regcache->raw_read (RL78_SPL_REGNUM, buffer);
 677       if (status == REG_VALID)
 678         status = regcache->raw_read (RL78_SPH_REGNUM, buffer + 1);
 679     }
 680   else if (reg == RL78_PC_REGNUM)
 681     {
 682       gdb_byte rawbuf[4];
 683
 684       status = regcache->raw_read (RL78_RAW_PC_REGNUM, rawbuf);
 685       memcpy (buffer, rawbuf, 3);
 686     }
 687   else if (RL78_X_REGNUM <= reg && reg <= RL78_H_REGNUM)
 688     {
 689       ULONGEST psw;
 690
 691       status = regcache->raw_read (RL78_PSW_REGNUM, &psw);
 692       if (status == REG_VALID)
 693         {
 694           /* RSB0 is at bit 3; RSBS1 is at bit 5.  */
 695           int bank = ((psw >> 3) & 1) | ((psw >> 4) & 1);
 696           int raw_regnum = RL78_RAW_BANK0_R0_REGNUM + bank * RL78_REGS_PER_BANK
 697                            + (reg - RL78_X_REGNUM);
 698           status = regcache->raw_read (raw_regnum, buffer);
 699         }
 700     }
 701   else if (RL78_AX_REGNUM <= reg && reg <= RL78_HL_REGNUM)
 702     {
 703       ULONGEST psw;
 704
 705       status = regcache->raw_read (RL78_PSW_REGNUM, &psw);
 706       if (status == REG_VALID)
 707         {
 708           /* RSB0 is at bit 3; RSBS1 is at bit 5.  */
 709           int bank = ((psw >> 3) & 1) | ((psw >> 4) & 1);
 710           int raw_regnum = RL78_RAW_BANK0_R0_REGNUM + bank * RL78_REGS_PER_BANK
 711                            + 2 * (reg - RL78_AX_REGNUM);
 712           status = regcache->raw_read (raw_regnum, buffer);
 713           if (status == REG_VALID)
 714             status = regcache->raw_read (raw_regnum + 1, buffer + 1);
 715         }
 716     }
 717   else
 718     gdb_assert_not_reached ("invalid pseudo register number");
 719   return status;
 720 }
 721
 722 /* Implement the "pseudo_register_write" gdbarch method.  */
 723
 724 static void
 725 rl78_pseudo_register_write (struct gdbarch *gdbarch,
 726                             struct regcache *regcache,
 727                             int reg, const gdb_byte *buffer)
 728 {
 729   if (RL78_BANK0_R0_REGNUM <= reg && reg <= RL78_BANK3_R7_REGNUM)
 730     {
 731       int raw_regnum = RL78_RAW_BANK0_R0_REGNUM
 732                        + (reg - RL78_BANK0_R0_REGNUM);
 733
 734       regcache->raw_write (raw_regnum, buffer);
 735     }
 736   else if (RL78_BANK0_RP0_REGNUM <= reg && reg <= RL78_BANK3_RP3_REGNUM)
 737     {
 738       int raw_regnum = 2 * (reg - RL78_BANK0_RP0_REGNUM)
 739                        + RL78_RAW_BANK0_R0_REGNUM;
 740
 741       regcache->raw_write (raw_regnum, buffer);
 742       regcache->raw_write (raw_regnum + 1, buffer + 1);
 743     }
 744   else if (RL78_BANK0_RP0_PTR_REGNUM <= reg && reg <= RL78_BANK3_RP3_PTR_REGNUM)
 745     {
 746       int raw_regnum = 2 * (reg - RL78_BANK0_RP0_PTR_REGNUM)
 747                        + RL78_RAW_BANK0_R0_REGNUM;
 748
 749       regcache->raw_write (raw_regnum, buffer);
 750       regcache->raw_write (raw_regnum + 1, buffer + 1);
 751     }
 752   else if (reg == RL78_SP_REGNUM)
 753     {
 754       regcache->raw_write (RL78_SPL_REGNUM, buffer);
 755       regcache->raw_write (RL78_SPH_REGNUM, buffer + 1);
 756     }
 757   else if (reg == RL78_PC_REGNUM)
 758     {
 759       gdb_byte rawbuf[4];
 760
 761       memcpy (rawbuf, buffer, 3);
 762       rawbuf[3] = 0;
 763       regcache->raw_write (RL78_RAW_PC_REGNUM, rawbuf);
 764     }
 765   else if (RL78_X_REGNUM <= reg && reg <= RL78_H_REGNUM)
 766     {
 767       ULONGEST psw;
 768       int bank;
 769       int raw_regnum;
 770
 771       regcache_raw_read_unsigned (regcache, RL78_PSW_REGNUM, &psw);
 772       bank = ((psw >> 3) & 1) | ((psw >> 4) & 1);
 773       /* RSB0 is at bit 3; RSBS1 is at bit 5.  */
 774       raw_regnum = RL78_RAW_BANK0_R0_REGNUM + bank * RL78_REGS_PER_BANK
 775                    + (reg - RL78_X_REGNUM);
 776       regcache->raw_write (raw_regnum, buffer);
 777     }
 778   else if (RL78_AX_REGNUM <= reg && reg <= RL78_HL_REGNUM)
 779     {
 780       ULONGEST psw;
 781       int bank, raw_regnum;
 782
 783       regcache_raw_read_unsigned (regcache, RL78_PSW_REGNUM, &psw);
 784       bank = ((psw >> 3) & 1) | ((psw >> 4) & 1);
 785       /* RSB0 is at bit 3; RSBS1 is at bit 5.  */
 786       raw_regnum = RL78_RAW_BANK0_R0_REGNUM + bank * RL78_REGS_PER_BANK
 787                    + 2 * (reg - RL78_AX_REGNUM);
 788       regcache->raw_write (raw_regnum, buffer);
 789       regcache->raw_write (raw_regnum + 1, buffer + 1);
 790     }
 791   else
 792     gdb_assert_not_reached ("invalid pseudo register number");
 793 }
 794
 795 /* The documented BRK instruction is actually a two byte sequence,
 796    {0x61, 0xcc}, but instructions may be as short as one byte.
 797    Correspondence with Renesas revealed that the one byte sequence
 798    0xff is used when a one byte breakpoint instruction is required.  */
 799 constexpr gdb_byte rl78_break_insn[] = { 0xff };
 800
 801 typedef BP_MANIPULATION (rl78_break_insn) rl78_breakpoint;
 802
 803 /* Define a "handle" struct for fetching the next opcode.  */
 804
 805 struct rl78_get_opcode_byte_handle
 806 {
 807   CORE_ADDR pc;
 808 };
 809
 810 static int
 811 opc_reg_to_gdb_regnum (int opcreg)
 812 {
 813   switch (opcreg)
 814     {
 815       case RL78_Reg_X:
 816         return RL78_X_REGNUM;
 817       case RL78_Reg_A:
 818         return RL78_A_REGNUM;
 819       case RL78_Reg_C:
 820         return RL78_C_REGNUM;
 821       case RL78_Reg_B:
 822         return RL78_B_REGNUM;
 823       case RL78_Reg_E:
 824         return RL78_E_REGNUM;
 825       case RL78_Reg_D:
 826         return RL78_D_REGNUM;
 827       case RL78_Reg_L:
 828         return RL78_L_REGNUM;
 829       case RL78_Reg_H:
 830         return RL78_H_REGNUM;
 831       case RL78_Reg_AX:
 832         return RL78_AX_REGNUM;
 833       case RL78_Reg_BC:
 834         return RL78_BC_REGNUM;
 835       case RL78_Reg_DE:
 836         return RL78_DE_REGNUM;
 837       case RL78_Reg_HL:
 838         return RL78_HL_REGNUM;
 839       case RL78_Reg_SP:
 840         return RL78_SP_REGNUM;
 841       case RL78_Reg_PSW:
 842         return RL78_PSW_REGNUM;
 843       case RL78_Reg_CS:
 844         return RL78_CS_REGNUM;
 845       case RL78_Reg_ES:
 846         return RL78_ES_REGNUM;
 847       case RL78_Reg_PMC:
 848         return RL78_PMC_REGNUM;
 849       case RL78_Reg_MEM:
 850         return RL78_MEM_REGNUM;
 851       default:
 852         internal_error (__FILE__, __LINE__,
 853                         _("Undefined mapping for opc reg %d"),
 854                         opcreg);
 855     }
 856
 857   /* Not reached.  */
 858   return 0;
 859 }
 860
 861 /* Fetch a byte on behalf of the opcode decoder.  HANDLE contains
 862    the memory address of the next byte to fetch.  If successful,
 863    the address in the handle is updated and the byte fetched is
 864    returned as the value of the function.  If not successful, -1
 865    is returned.  */
 866
 867 static int
 868 rl78_get_opcode_byte (void *handle)
 869 {
 870   struct rl78_get_opcode_byte_handle *opcdata
 871     = (struct rl78_get_opcode_byte_handle *) handle;
 872   int status;
 873   gdb_byte byte;
 874
 875   status = target_read_memory (opcdata->pc, &byte, 1);
 876   if (status == 0)
 877     {
 878       opcdata->pc += 1;
 879       return byte;
 880     }
 881   else
 882     return -1;
 883 }
 884
 885 /* Function for finding saved registers in a 'struct pv_area'; this
 886    function is passed to pv_area::scan.
 887
 888    If VALUE is a saved register, ADDR says it was saved at a constant
 889    offset from the frame base, and SIZE indicates that the whole
 890    register was saved, record its offset.  */
 891
 892 static void
 893 check_for_saved (void *result_untyped, pv_t addr, CORE_ADDR size,
 894                  pv_t value)
 895 {
 896   struct rl78_prologue *result = (struct rl78_prologue *) result_untyped;
 897
 898   if (value.kind == pvk_register
 899       && value.k == 0
 900       && pv_is_register (addr, RL78_SP_REGNUM)
 901       && size == register_size (target_gdbarch (), value.reg))
 902     result->reg_offset[value.reg] = addr.k;
 903 }
 904
 905 /* Analyze a prologue starting at START_PC, going no further than
 906    LIMIT_PC.  Fill in RESULT as appropriate.  */
 907
 908 static void
 909 rl78_analyze_prologue (CORE_ADDR start_pc,
 910                        CORE_ADDR limit_pc, struct rl78_prologue *result)
 911 {
 912   CORE_ADDR pc, next_pc;
 913   int rn;
 914   pv_t reg[RL78_NUM_TOTAL_REGS];
 915   CORE_ADDR after_last_frame_setup_insn = start_pc;
 916   int bank = 0;
 917
 918   memset (result, 0, sizeof (*result));
 919
 920   for (rn = 0; rn < RL78_NUM_TOTAL_REGS; rn++)
 921     {
 922       reg[rn] = pv_register (rn, 0);
 923       result->reg_offset[rn] = 1;
 924     }
 925
 926   pv_area stack (RL78_SP_REGNUM, gdbarch_addr_bit (target_gdbarch ()));
 927
 928   /* The call instruction has saved the return address on the stack.  */
 929   reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM], -4);
 930   stack.store (reg[RL78_SP_REGNUM], 4, reg[RL78_PC_REGNUM]);
 931
 932   pc = start_pc;
 933   while (pc < limit_pc)
 934     {
 935       int bytes_read;
 936       struct rl78_get_opcode_byte_handle opcode_handle;
 937       RL78_Opcode_Decoded opc;
 938
 939       opcode_handle.pc = pc;
 940       bytes_read = rl78_decode_opcode (pc, &opc, rl78_get_opcode_byte,
 941                                        &opcode_handle, RL78_ISA_DEFAULT);
 942       next_pc = pc + bytes_read;
 943
 944       if (opc.id == RLO_sel)
 945         {
 946           bank = opc.op[1].addend;
 947         }
 948       else if (opc.id == RLO_mov
 949                && opc.op[0].type == RL78_Operand_PreDec
 950                && opc.op[0].reg == RL78_Reg_SP
 951                && opc.op[1].type == RL78_Operand_Register)
 952         {
 953           int rsrc = (bank * RL78_REGS_PER_BANK)
 954             + 2 * (opc.op[1].reg - RL78_Reg_AX);
 955
 956           reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM], -1);
 957           stack.store (reg[RL78_SP_REGNUM], 1, reg[rsrc]);
 958           reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM], -1);
 959           stack.store (reg[RL78_SP_REGNUM], 1, reg[rsrc + 1]);
 960           after_last_frame_setup_insn = next_pc;
 961         }
 962       else if (opc.id == RLO_sub
 963                && opc.op[0].type == RL78_Operand_Register
 964                && opc.op[0].reg == RL78_Reg_SP
 965                && opc.op[1].type == RL78_Operand_Immediate)
 966         {
 967           int addend = opc.op[1].addend;
 968
 969           reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM],
 970                                                  -addend);
 971           after_last_frame_setup_insn = next_pc;
 972         }
 973       else if (opc.id == RLO_mov
 974                && opc.size == RL78_Word
 975                && opc.op[0].type == RL78_Operand_Register
 976                && opc.op[1].type == RL78_Operand_Indirect
 977                && opc.op[1].addend == RL78_SP_ADDR)
 978         {
 979           reg[opc_reg_to_gdb_regnum (opc.op[0].reg)]
 980             = reg[RL78_SP_REGNUM];
 981         }
 982       else if (opc.id == RLO_sub
 983                && opc.size == RL78_Word
 984                && opc.op[0].type == RL78_Operand_Register
 985                && opc.op[1].type == RL78_Operand_Immediate)
 986         {
 987           int addend = opc.op[1].addend;
 988           int regnum = opc_reg_to_gdb_regnum (opc.op[0].reg);
 989
 990           reg[regnum] = pv_add_constant (reg[regnum], -addend);
 991         }
 992       else if (opc.id == RLO_mov
 993                && opc.size == RL78_Word
 994                && opc.op[0].type == RL78_Operand_Indirect
 995                && opc.op[0].addend == RL78_SP_ADDR
 996                && opc.op[1].type == RL78_Operand_Register)
 997         {
 998           reg[RL78_SP_REGNUM]
 999             = reg[opc_reg_to_gdb_regnum (opc.op[1].reg)];
1000           after_last_frame_setup_insn = next_pc;
1001         }
1002       else
1003         {
1004           /* Terminate the prologue scan.  */
1005           break;
1006         }
1007
1008       pc = next_pc;
1009     }
1010
1011   /* Is the frame size (offset, really) a known constant?  */
1012   if (pv_is_register (reg[RL78_SP_REGNUM], RL78_SP_REGNUM))
1013     result->frame_size = reg[RL78_SP_REGNUM].k;
1014
1015   /* Record where all the registers were saved.  */
1016   stack.scan (check_for_saved, (void *) result);
1017
1018   result->prologue_end = after_last_frame_setup_insn;
1019 }
1020
1021 /* Implement the "addr_bits_remove" gdbarch method.  */
1022
1023 static CORE_ADDR
1024 rl78_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
1025 {
1026   return addr & 0xffffff;
1027 }
1028
1029 /* Implement the "address_to_pointer" gdbarch method.  */
1030
1031 static void
1032 rl78_address_to_pointer (struct gdbarch *gdbarch,
1033                          struct type *type, gdb_byte *buf, CORE_ADDR addr)
1034 {
1035   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1036
1037   store_unsigned_integer (buf, TYPE_LENGTH (type), byte_order,
1038                           addr & 0xffffff);
1039 }
1040
1041 /* Implement the "pointer_to_address" gdbarch method.  */
1042
1043 static CORE_ADDR
1044 rl78_pointer_to_address (struct gdbarch *gdbarch,
1045                          struct type *type, const gdb_byte *buf)
1046 {
1047   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1048   CORE_ADDR addr
1049     = extract_unsigned_integer (buf, TYPE_LENGTH (type), byte_order);
1050
1051   /* Is it a code address?  */
1052   if (TYPE_TARGET_TYPE (type)->code () == TYPE_CODE_FUNC
1053       || TYPE_TARGET_TYPE (type)->code () == TYPE_CODE_METHOD
1054       || TYPE_CODE_SPACE (TYPE_TARGET_TYPE (type))
1055       || TYPE_LENGTH (type) == 4)
1056     return rl78_make_instruction_address (addr);
1057   else
1058     return rl78_make_data_address (addr);
1059 }
1060
1061 /* Implement the "skip_prologue" gdbarch method.  */
1062
1063 static CORE_ADDR
1064 rl78_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
1065 {
1066   const char *name;
1067   CORE_ADDR func_addr, func_end;
1068   struct rl78_prologue p;
1069
1070   /* Try to find the extent of the function that contains PC.  */
1071   if (!find_pc_partial_function (pc, &name, &func_addr, &func_end))
1072     return pc;
1073
1074   rl78_analyze_prologue (pc, func_end, &p);
1075   return p.prologue_end;
1076 }
1077
1078 /* Implement the "unwind_pc" gdbarch method.  */
1079
1080 static CORE_ADDR
1081 rl78_unwind_pc (struct gdbarch *arch, struct frame_info *next_frame)
1082 {
1083   return rl78_addr_bits_remove
1084            (arch, frame_unwind_register_unsigned (next_frame,
1085                                                   RL78_PC_REGNUM));
1086 }
1087
1088 /* Given a frame described by THIS_FRAME, decode the prologue of its
1089    associated function if there is not cache entry as specified by
1090    THIS_PROLOGUE_CACHE.  Save the decoded prologue in the cache and
1091    return that struct as the value of this function.  */
1092
1093 static struct rl78_prologue *
1094 rl78_analyze_frame_prologue (struct frame_info *this_frame,
1095                            void **this_prologue_cache)
1096 {
1097   if (!*this_prologue_cache)
1098     {
1099       CORE_ADDR func_start, stop_addr;
1100
1101       *this_prologue_cache = FRAME_OBSTACK_ZALLOC (struct rl78_prologue);
1102
1103       func_start = get_frame_func (this_frame);
1104       stop_addr = get_frame_pc (this_frame);
1105
1106       /* If we couldn't find any function containing the PC, then
1107          just initialize the prologue cache, but don't do anything.  */
1108       if (!func_start)
1109         stop_addr = func_start;
1110
1111       rl78_analyze_prologue (func_start, stop_addr,
1112                              (struct rl78_prologue *) *this_prologue_cache);
1113     }
1114
1115   return (struct rl78_prologue *) *this_prologue_cache;
1116 }
1117
1118 /* Given a frame and a prologue cache, return this frame's base.  */
1119
1120 static CORE_ADDR
1121 rl78_frame_base (struct frame_info *this_frame, void **this_prologue_cache)
1122 {
1123   struct rl78_prologue *p
1124     = rl78_analyze_frame_prologue (this_frame, this_prologue_cache);
1125   CORE_ADDR sp = get_frame_register_unsigned (this_frame, RL78_SP_REGNUM);
1126
1127   return rl78_make_data_address (sp - p->frame_size);
1128 }
1129
1130 /* Implement the "frame_this_id" method for unwinding frames.  */
1131
1132 static void
1133 rl78_this_id (struct frame_info *this_frame,
1134               void **this_prologue_cache, struct frame_id *this_id)
1135 {
1136   *this_id = frame_id_build (rl78_frame_base (this_frame,
1137                                               this_prologue_cache),
1138                              get_frame_func (this_frame));
1139 }
1140
1141 /* Implement the "frame_prev_register" method for unwinding frames.  */
1142
1143 static struct value *
1144 rl78_prev_register (struct frame_info *this_frame,
1145                     void **this_prologue_cache, int regnum)
1146 {
1147   struct rl78_prologue *p
1148     = rl78_analyze_frame_prologue (this_frame, this_prologue_cache);
1149   CORE_ADDR frame_base = rl78_frame_base (this_frame, this_prologue_cache);
1150
1151   if (regnum == RL78_SP_REGNUM)
1152     return frame_unwind_got_constant (this_frame, regnum, frame_base);
1153
1154   else if (regnum == RL78_SPL_REGNUM)
1155     return frame_unwind_got_constant (this_frame, regnum,
1156                                       (frame_base & 0xff));
1157
1158   else if (regnum == RL78_SPH_REGNUM)
1159     return frame_unwind_got_constant (this_frame, regnum,
1160                                       ((frame_base >> 8) & 0xff));
1161
1162   /* If prologue analysis says we saved this register somewhere,
1163      return a description of the stack slot holding it.  */
1164   else if (p->reg_offset[regnum] != 1)
1165     {
1166       struct value *rv =
1167         frame_unwind_got_memory (this_frame, regnum,
1168                                  frame_base + p->reg_offset[regnum]);
1169
1170       if (regnum == RL78_PC_REGNUM)
1171         {
1172           ULONGEST pc = rl78_make_instruction_address (value_as_long (rv));
1173
1174           return frame_unwind_got_constant (this_frame, regnum, pc);
1175         }
1176       return rv;
1177     }
1178
1179   /* Otherwise, presume we haven't changed the value of this
1180      register, and get it from the next frame.  */
1181   else
1182     return frame_unwind_got_register (this_frame, regnum, regnum);
1183 }
1184
1185 static const struct frame_unwind rl78_unwind =
1186 {
1187   "rl78 prologue",
1188   NORMAL_FRAME,
1189   default_frame_unwind_stop_reason,
1190   rl78_this_id,
1191   rl78_prev_register,
1192   NULL,
1193   default_frame_sniffer
1194 };
1195
1196 /* Implement the "dwarf_reg_to_regnum" gdbarch method.  */
1197
1198 static int
1199 rl78_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
1200 {
1201   if (0 <= reg && reg <= 31)
1202     {
1203       if ((reg & 1) == 0)
1204         /* Map even registers to their 16-bit counterparts which have a
1205            pointer type.  This is usually what is required from the DWARF
1206            info.  */
1207         return (reg >> 1) + RL78_BANK0_RP0_PTR_REGNUM;
1208       else
1209         return reg;
1210     }
1211   else if (reg == 32)
1212     return RL78_SP_REGNUM;
1213   else if (reg == 33)
1214     return -1;                  /* ap */
1215   else if (reg == 34)
1216     return RL78_PSW_REGNUM;
1217   else if (reg == 35)
1218     return RL78_ES_REGNUM;
1219   else if (reg == 36)
1220     return RL78_CS_REGNUM;
1221   else if (reg == 37)
1222     return RL78_PC_REGNUM;
1223   else
1224     return -1;
1225 }
1226
1227 /* Implement the `register_sim_regno' gdbarch method.  */
1228
1229 static int
1230 rl78_register_sim_regno (struct gdbarch *gdbarch, int regnum)
1231 {
1232   gdb_assert (regnum < RL78_NUM_REGS);
1233
1234   /* So long as regnum is in [0, RL78_NUM_REGS), it's valid.  We
1235      just want to override the default here which disallows register
1236      numbers which have no names.  */
1237   return regnum;
1238 }
1239
1240 /* Implement the "return_value" gdbarch method.  */
1241
1242 static enum return_value_convention
1243 rl78_return_value (struct gdbarch *gdbarch,
1244                    struct value *function,
1245                    struct type *valtype,
1246                    struct regcache *regcache,
1247                    gdb_byte *readbuf, const gdb_byte *writebuf)
1248 {
1249   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1250   ULONGEST valtype_len = TYPE_LENGTH (valtype);
1251   rl78_gdbarch_tdep *tdep = (rl78_gdbarch_tdep *) gdbarch_tdep (gdbarch);
1252   int is_g10 = tdep->elf_flags & E_FLAG_RL78_G10;
1253
1254   if (valtype_len > 8)
1255     return RETURN_VALUE_STRUCT_CONVENTION;
1256
1257   if (readbuf)
1258     {
1259       ULONGEST u;
1260       int argreg = RL78_RAW_BANK1_R0_REGNUM;
1261       CORE_ADDR g10_raddr = 0xffec8;
1262       int offset = 0;
1263
1264       while (valtype_len > 0)
1265         {
1266           if (is_g10)
1267             u = read_memory_integer (g10_raddr, 1,
1268                                      gdbarch_byte_order (gdbarch));
1269           else
1270             regcache_cooked_read_unsigned (regcache, argreg, &u);
1271           store_unsigned_integer (readbuf + offset, 1, byte_order, u);
1272           valtype_len -= 1;
1273           offset += 1;
1274           argreg++;
1275           g10_raddr++;
1276         }
1277     }
1278
1279   if (writebuf)
1280     {
1281       ULONGEST u;
1282       int argreg = RL78_RAW_BANK1_R0_REGNUM;
1283       CORE_ADDR g10_raddr = 0xffec8;
1284       int offset = 0;
1285
1286       while (valtype_len > 0)
1287         {
1288           u = extract_unsigned_integer (writebuf + offset, 1, byte_order);
1289           if (is_g10) {
1290             gdb_byte b = u & 0xff;
1291             write_memory (g10_raddr, &b, 1);
1292           }
1293           else
1294             regcache_cooked_write_unsigned (regcache, argreg, u);
1295           valtype_len -= 1;
1296           offset += 1;
1297           argreg++;
1298           g10_raddr++;
1299         }
1300     }
1301
1302   return RETURN_VALUE_REGISTER_CONVENTION;
1303 }
1304
1305
1306 /* Implement the "frame_align" gdbarch method.  */
1307
1308 static CORE_ADDR
1309 rl78_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
1310 {
1311   return rl78_make_data_address (align_down (sp, 2));
1312 }
1313
1314
1315 /* Implement the "dummy_id" gdbarch method.  */
1316
1317 static struct frame_id
1318 rl78_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
1319 {
1320   return
1321     frame_id_build (rl78_make_data_address
1322                       (get_frame_register_unsigned
1323                         (this_frame, RL78_SP_REGNUM)),
1324                     get_frame_pc (this_frame));
1325 }
1326
1327
1328 /* Implement the "push_dummy_call" gdbarch method.  */
1329
1330 static CORE_ADDR
1331 rl78_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
1332                       struct regcache *regcache, CORE_ADDR bp_addr,
1333                       int nargs, struct value **args, CORE_ADDR sp,
1334                       function_call_return_method return_method,
1335                       CORE_ADDR struct_addr)
1336 {
1337   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1338   gdb_byte buf[4];
1339   int i;
1340
1341   /* Push arguments in reverse order.  */
1342   for (i = nargs - 1; i >= 0; i--)
1343     {
1344       struct type *value_type = value_enclosing_type (args[i]);
1345       int len = TYPE_LENGTH (value_type);
1346       int container_len = (len + 1) & ~1;
1347
1348       sp -= container_len;
1349       write_memory (rl78_make_data_address (sp),
1350                     value_contents_all (args[i]).data (), len);
1351     }
1352
1353   /* Store struct value address.  */
1354   if (return_method == return_method_struct)
1355     {
1356       store_unsigned_integer (buf, 2, byte_order, struct_addr);
1357       sp -= 2;
1358       write_memory (rl78_make_data_address (sp), buf, 2);
1359     }
1360
1361   /* Store return address.  */
1362   sp -= 4;
1363   store_unsigned_integer (buf, 4, byte_order, bp_addr);
1364   write_memory (rl78_make_data_address (sp), buf, 4);
1365
1366   /* Finally, update the stack pointer...  */
1367   regcache_cooked_write_unsigned (regcache, RL78_SP_REGNUM, sp);
1368
1369   /* DWARF2/GCC uses the stack address *before* the function call as a
1370      frame's CFA.  */
1371   return rl78_make_data_address (sp + 4);
1372 }
1373
1374 /* Allocate and initialize a gdbarch object.  */
1375
1376 static struct gdbarch *
1377 rl78_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
1378 {
1379   struct gdbarch *gdbarch;
1380   int elf_flags;
1381
1382   /* Extract the elf_flags if available.  */
1383   if (info.abfd != NULL
1384       && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
1385     elf_flags = elf_elfheader (info.abfd)->e_flags;
1386   else
1387     elf_flags = 0;
1388
1389
1390   /* Try to find the architecture in the list of already defined
1391      architectures.  */
1392   for (arches = gdbarch_list_lookup_by_info (arches, &info);
1393        arches != NULL;
1394        arches = gdbarch_list_lookup_by_info (arches->next, &info))
1395     {
1396       rl78_gdbarch_tdep *tdep
1397         = (rl78_gdbarch_tdep *) gdbarch_tdep (arches->gdbarch);
1398
1399       if (tdep->elf_flags != elf_flags)
1400         continue;
1401
1402       return arches->gdbarch;
1403     }
1404
1405   /* None found, create a new architecture from the information
1406      provided.  */
1407   rl78_gdbarch_tdep * tdep = new rl78_gdbarch_tdep;
1408   gdbarch = gdbarch_alloc (&info, tdep);
1409   tdep->elf_flags = elf_flags;
1410
1411   /* Initialize types.  */
1412   tdep->rl78_void = arch_type (gdbarch, TYPE_CODE_VOID, TARGET_CHAR_BIT,
1413                                "void");
1414   tdep->rl78_uint8 = arch_integer_type (gdbarch, 8, 1, "uint8_t");
1415   tdep->rl78_int8 = arch_integer_type (gdbarch, 8, 0, "int8_t");
1416   tdep->rl78_uint16 = arch_integer_type (gdbarch, 16, 1, "uint16_t");
1417   tdep->rl78_int16 = arch_integer_type (gdbarch, 16, 0, "int16_t");
1418   tdep->rl78_uint32 = arch_integer_type (gdbarch, 32, 1, "uint32_t");
1419   tdep->rl78_int32 = arch_integer_type (gdbarch, 32, 0, "int32_t");
1420
1421   tdep->rl78_data_pointer
1422     = arch_pointer_type (gdbarch, 16, "rl78_data_addr_t", tdep->rl78_void);
1423   tdep->rl78_code_pointer
1424     = arch_pointer_type (gdbarch, 32, "rl78_code_addr_t", tdep->rl78_void);
1425
1426   /* Registers.  */
1427   set_gdbarch_num_regs (gdbarch, RL78_NUM_REGS);
1428   set_gdbarch_num_pseudo_regs (gdbarch, RL78_NUM_PSEUDO_REGS);
1429   if (tdep->elf_flags & E_FLAG_RL78_G10)
1430     set_gdbarch_register_name (gdbarch, rl78_g10_register_name);
1431   else
1432     set_gdbarch_register_name (gdbarch, rl78_register_name);
1433   set_gdbarch_register_type (gdbarch, rl78_register_type);
1434   set_gdbarch_pc_regnum (gdbarch, RL78_PC_REGNUM);
1435   set_gdbarch_sp_regnum (gdbarch, RL78_SP_REGNUM);
1436   set_gdbarch_pseudo_register_read (gdbarch, rl78_pseudo_register_read);
1437   set_gdbarch_pseudo_register_write (gdbarch, rl78_pseudo_register_write);
1438   set_gdbarch_dwarf2_reg_to_regnum (gdbarch, rl78_dwarf_reg_to_regnum);
1439   set_gdbarch_register_reggroup_p (gdbarch, rl78_register_reggroup_p);
1440   set_gdbarch_register_sim_regno (gdbarch, rl78_register_sim_regno);
1441
1442   /* Data types.  */
1443   set_gdbarch_char_signed (gdbarch, 0);
1444   set_gdbarch_short_bit (gdbarch, 16);
1445   set_gdbarch_int_bit (gdbarch, 16);
1446   set_gdbarch_long_bit (gdbarch, 32);
1447   set_gdbarch_long_long_bit (gdbarch, 64);
1448   set_gdbarch_ptr_bit (gdbarch, 16);
1449   set_gdbarch_addr_bit (gdbarch, 32);
1450   set_gdbarch_dwarf2_addr_size (gdbarch, 4);
1451   set_gdbarch_float_bit (gdbarch, 32);
1452   set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
1453   set_gdbarch_double_bit (gdbarch, 32);
1454   set_gdbarch_long_double_bit (gdbarch, 64);
1455   set_gdbarch_double_format (gdbarch, floatformats_ieee_single);
1456   set_gdbarch_long_double_format (gdbarch, floatformats_ieee_double);
1457   set_gdbarch_pointer_to_address (gdbarch, rl78_pointer_to_address);
1458   set_gdbarch_address_to_pointer (gdbarch, rl78_address_to_pointer);
1459   set_gdbarch_addr_bits_remove (gdbarch, rl78_addr_bits_remove);
1460
1461   /* Breakpoints.  */
1462   set_gdbarch_breakpoint_kind_from_pc (gdbarch, rl78_breakpoint::kind_from_pc);
1463   set_gdbarch_sw_breakpoint_from_kind (gdbarch, rl78_breakpoint::bp_from_kind);
1464   set_gdbarch_decr_pc_after_break (gdbarch, 1);
1465
1466   /* Frames, prologues, etc.  */
1467   set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
1468   set_gdbarch_skip_prologue (gdbarch, rl78_skip_prologue);
1469   set_gdbarch_unwind_pc (gdbarch, rl78_unwind_pc);
1470   set_gdbarch_frame_align (gdbarch, rl78_frame_align);
1471
1472   dwarf2_append_unwinders (gdbarch);
1473   frame_unwind_append_unwinder (gdbarch, &rl78_unwind);
1474
1475   /* Dummy frames, return values.  */
1476   set_gdbarch_dummy_id (gdbarch, rl78_dummy_id);
1477   set_gdbarch_push_dummy_call (gdbarch, rl78_push_dummy_call);
1478   set_gdbarch_return_value (gdbarch, rl78_return_value);
1479
1480   /* Virtual tables.  */
1481   set_gdbarch_vbit_in_delta (gdbarch, 1);
1482
1483   return gdbarch;
1484 }
1485
1486 /* Register the above initialization routine.  */
1487
1488 void _initialize_rl78_tdep ();
1489 void
1490 _initialize_rl78_tdep ()
1491 {
1492   register_gdbarch_init (bfd_arch_rl78, rl78_gdbarch_init);
1493 }