1 # Expect script
for ld-version tests
2 # Copyright
(C
) 1997-2024 Free Software Foundation
, Inc.
4 # This file is part of the GNU Binutils.
6 # This
program is free software
; you can redistribute it and
/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation
; either version
3 of the License
, or
9 #
(at your option
) any later version.
11 # This
program is distributed in the hope that it will be useful
,
12 # but WITHOUT
ANY WARRANTY
; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License
for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this
program; if not
, write to the Free Software
18 # Foundation
, Inc.
, 51 Franklin Street
- Fifth Floor
, Boston
,
21 # Written by Eric Youngdale
(eric@andante.jic.com
)
25 # Check to see
if the C compiler works
26 if { ![check_compiler_available
] } {
30 # Skip targets where
-shared is not supported
31 if { ![check_shared_lib_support
] } {
35 # This test can only be run
on a couple of ELF platforms.
36 # Square bracket expressions seem to confuse istarget.
37 # This is similar to the test that is used in
ld-shared
, BTW.
38 if { ![istarget hppa
*64*-*-hpux
*]
39 && ![istarget hppa
*-*-linux
*]
40 && ![istarget i?
86-*-elf
*]
41 && ![istarget i?
86-*-linux
*]
42 && ![istarget i?
86-*-gnu
*]
43 && ![istarget ia64
-*-elf
*]
44 && ![istarget ia64
-*-linux
*]
45 && ![istarget m68k
-*-linux
*]
46 && ![istarget mips
*-*-irix5
*]
47 && ![istarget powerpc
*-*-elf
*]
48 && ![istarget powerpc
*-*-linux
*]
49 && ![istarget powerpc
*-*-sysv4
*]
50 && ![istarget sparc
*-*-elf
]
51 && ![istarget sparc
*-*-solaris2
*]
52 && ![istarget sparc
*-*-linux
*]
53 && ![istarget aarch64
*-*-linux
*]
54 && ![istarget arm
*-*-linux
*]
55 && ![istarget mips
*-*-linux
*]
56 && ![istarget alpha
*-*-linux
*]
57 && ![istarget s390
*-*-linux
*]
58 && ![istarget sh\
[34\
]*-*-linux
*]
59 && ![istarget x86_64
-*-linux
*] } {
65 set VOBJDUMP_FLAGS
--private
-headers
66 set DOBJDUMP_FLAGS
--dynamic
-syms
67 set SOBJDUMP_FLAGS
--syms
68 set shared
"--shared --no-undefined-version"
69 set script
--version
-script
71 # Old version of GCC
for MIPS default to enabling
-fpic
72 # and
get confused
if it is used
on the command line.
73 if { [istarget mips
*-*-*] && ! [at_least_gcc_version
4 3] } then {
76 # Unfortunately
, the gcc
argument is
-fpic and the cc
argument is
77 #
-KPIC. We have to try both.
79 send_log
"$CC_FOR_TARGET $picflag\n"
80 verbose
"$CC_FOR_TARGET $picflag"
81 catch
"exec $CC_FOR_TARGET $picflag" exec_output
82 send_log
"$exec_output\n"
83 verbose
"--" "$exec_output"
84 if { [string match
"*illegal option*" $exec_output]
85 ||
[string match
"*option ignored*" $exec_output]
86 ||
[string match
"*unrecognized option*" $exec_output]
87 ||
[string match
"*passed to ld*" $exec_output] } {
92 switch -glob $target_triplet
{
93 ia64
-*-* { set as_options
"-x" }
94 sparc
-*-* { set as_options
"-Av9a" }
95 default
{ set as_options
"" }
98 proc test_ar
{ test lib object expect
} {
106 verbose
-log "$ar -cr $tmpdir/$lib $tmpdir/$object"
107 catch
"exec $ar -cr $tmpdir/$lib $tmpdir/$object" exec_output
108 set exec_output
[prune_warnings $exec_output
]
109 if ![string match
"" $exec_output] {
110 verbose
-log "$exec_output"
115 set cmd
"$nm --print-armap $tmpdir/$lib | sed -n -e /^\\\\./d -e \"/^VERS.* in /p\" -e \"/bar.* in /p\" -e \"/foo.* in /p\" | sort > $tmpdir/nm.out"
117 catch
"exec $cmd" exec_output
118 if [string match
"" $exec_output] then {
119 catch
"exec sort $srcdir/$subdir/$expect | $diff $tmpdir/nm.out -" exec_output
120 set exec_output
[prune_warnings $exec_output
]
121 if [string match
"" $exec_output] then {
125 verbose
-log "$exec_output"
130 verbose
-log "$exec_output"
136 # objdump_emptysymstuff
137 # Check non
-dynamic symbols and make sure there are
none with
'@'.
139 proc objdump_emptysymstuff
{ objdump object
} {
140 global SOBJDUMP_FLAGS
141 global version_output
144 if ![info exists SOBJDUMP_FLAGS
] { set SOBJDUMP_FLAGS
"" }
146 verbose
-log "$objdump $SOBJDUMP_FLAGS $object | sed -n /\@/p"
148 catch
"exec $objdump $SOBJDUMP_FLAGS $object | sed -n /\@/p" exec_output
149 set exec_output
[prune_warnings $exec_output
]
150 if [string match
"" $exec_output] then {
151 # We shouldn
't get anything here.
154 # it is not normal to come here - we have no output to compare.
155 verbose -log "$exec_output"
156 verbose -log "objdump_emptysymstuff: did not expect any output from objdump"
163 # objdump_emptydynsymstuff
164 # Check dynamic symbols and make sure there are none with '@
'.
166 proc objdump_emptydynsymstuff { objdump object } {
167 global DOBJDUMP_FLAGS
168 global version_output
171 if ![info exists VOBJDUMP_FLAGS] { set VOBJDUMP_FLAGS "" }
173 verbose -log "$objdump $DOBJDUMP_FLAGS $object | sed -n /VERS/p\\\;/show/p"
175 catch "exec $objdump $DOBJDUMP_FLAGS $object | sed -n /VERS/p\\\;/show/p" exec_output
176 set exec_output [prune_warnings $exec_output]
177 if [string match "" $exec_output] then {
178 # We shouldn't
get anything here.
180 } else { if [string match
"*objdump: *: not a dynamic object" $exec_output] then {
183 # it is not
normal to come here
- we have no output to compare.
184 verbose
-log "$exec_output"
185 verbose
-log "objdump_emptydynsymstuff: did not expect any output from objdump"
191 # objdump_emptyverstuff
192 # Make sure there is no version information
194 proc objdump_emptyverstuff
{ objdump object
} {
195 global VOBJDUMP_FLAGS
196 global version_output
200 if {[which $objdump
] == 0} then {
201 perror
"$objdump does not exist"
205 if ![info exists VOBJDUMP_FLAGS
] { set VOBJDUMP_FLAGS
"" }
207 verbose
-log "$objdump $VOBJDUMP_FLAGS $object | sed -n /Version/,\\\$p > $tmpdir/objdump.out"
209 catch
"exec $objdump $VOBJDUMP_FLAGS $object | sed -n /Version/,\\\$p" exec_output
210 set exec_output
[prune_warnings $exec_output
]
211 if [string match
"" $exec_output] then {
212 # it is
normal to fail here
- we have no output to compare.
214 } else { if { [string match
"*libc*" $exec_output] } then {
215 # this probably means that there is version information in libc
, so we
216 # can
't really perform this test.
218 } else { if { [string match "*Version? EABI*" $exec_output] } then {
219 # there is EABI Version information in the private flags of the binary.
222 verbose -log "$exec_output"
223 verbose -log "objdump_emptyverstuff: did not expect any output from objdump"
230 # Dump non-dynamic symbol stuff and make sure that it is sane.
232 proc objdump_symstuff { objdump object expectfile } {
233 global SOBJDUMP_FLAGS
234 global version_output
238 if ![info exists SOBJDUMP_FLAGS] { set SOBJDUMP_FLAGS "" }
240 set cmd "$objdump $SOBJDUMP_FLAGS $object | sed -n {s/^\\(\[0-9a-f\]* *\\)\\(\[gw\]\\)\\( *\\)\\(\[FO\]\\)/\\1\\2\\4\\3/;/\@/p} | sort -k 5 > $tmpdir/objdump.out"
242 catch "exec $cmd" exec_output
243 set exec_output [prune_warnings $exec_output]
244 if [string match "" $exec_output] then {
246 # Now do a line-by-line comparison to effectively diff the darned things
247 # The stuff coming from the expectfile is actually a regex, so we can
248 # skip over the actual addresses and so forth. This is currently very
249 # simpleminded - it expects a one-to-one correspondence in terms of line
252 if [file exists $expectfile] then {
253 set file_a [open $expectfile r]
255 perror "$expectfile doesn't exist
"
259 if [file
exists $tmpdir
/objdump.out
] then {
260 set file_b
[open $tmpdir
/objdump.out r
]
262 perror
"$tmpdir/objdump.out doesn't exist"
266 verbose
"# Diff'ing: $expectfile $tmpdir/objdump.out" 2
272 while { [gets $file_a line
] != $eof
} {
273 if [regexp
"^#.*$" $line] then {
281 while { [gets $file_b line
] != $eof
} {
282 if [regexp
{\.
text.
* \.
[^
]*$
} $line
] then {
283 # Discard defined powerpc64 dot
-symbols
291 for { set i
0 } { $i
< [llength $list_a
] } { incr i
} {
292 set line_a
[lindex $list_a $i
]
293 set line_b
[lindex $list_b $i
]
295 verbose
"\t$expectfile: $i: $line_a" 3
296 verbose
"\t/tmp/objdump.out: $i: $line_b" 3
297 if [regexp $line_a $line_b
] then {
300 verbose
-log "\t$expectfile: $i: $line_a"
301 verbose
-log "\t$tmpdir/objdump.out: $i: $line_b"
307 if { [llength $list_a
] != [llength $list_b
] } {
308 verbose
-log "Line count"
314 verbose
-log "$exec_output"
320 # objdump_dymsymstuff
321 # Dump dynamic symbol stuff and make sure that it is sane.
323 proc objdump_dynsymstuff
{ objdump object expectfile
} {
324 global DOBJDUMP_FLAGS
325 global version_output
329 if ![info exists DOBJDUMP_FLAGS
] { set DOBJDUMP_FLAGS
"" }
331 set cmd
"$objdump $DOBJDUMP_FLAGS $object | sed -n /VERS/p\\\;/show/p | sort | uniq > $tmpdir/objdump.out"
333 catch
"exec $cmd" exec_output
334 set exec_output
[prune_warnings $exec_output
]
335 if [string match
"" $exec_output] then {
337 # Now
do a line
-by
-line comparison to effectively diff the darned things
338 # The stuff coming from the expectfile is actually a regex
, so we can
339 # skip over the actual addresses and so forth. This is currently very
340 # simpleminded
- it expects a one
-to
-one correspondence in terms of line
343 if [file
exists $expectfile
] then {
344 set file_a
[open $expectfile r
]
346 warning
"$expectfile doesn't exist"
350 if [file
exists $tmpdir
/objdump.out
] then {
351 set file_b
[open $tmpdir
/objdump.out r
]
353 fail
"$tmpdir/objdump.out doesn't exist"
357 verbose
"# Diff'ing: $expectfile $tmpdir/objdump.out" 2
363 while { [gets $file_a line
] != $eof
} {
364 if [regexp
"^#.*$" $line] then {
372 while { [gets $file_b line
] != $eof
} {
373 if [regexp
{\.
text.
* \.
[^
]*$
} $line
] then {
374 # Discard defined powerpc64 dot
-symbols
382 for { set i
0 } { $i
< [llength $list_b
] } { incr i
} {
383 set line_b
[lindex $list_b $i
]
385 # The tests are rigged so that we should never
export a symbol with the
386 # word
'hide' in it. Thus we just search
for it
, and bail
if we find it.
387 if [regexp
"hide" $line_b] then {
388 verbose
-log "\t$tmpdir/objdump.out: $i: $line_b"
393 verbose
"\t$expectfile: $i: $line_b" 3
395 # We can
't assume that the sort is consistent across
396 # systems, so we must check each regexp. When we find a
397 # regexp, we null it out, so we don't match it twice.
398 for { set j
0 } { $j
< [llength $list_a
] } { incr j
} {
399 set line_a
[lindex $list_a $j
]
401 if [regexp $line_a $line_b
] then {
402 lreplace $list_a $j $j
"CAN NOT MATCH"
407 if { $j
>= [llength $list_a
] } {
408 verbose
-log "\t$tmpdir/objdump.out: $i: $line_b"
414 if { [llength $list_a
] != [llength $list_b
] } {
415 verbose
-log "Line count"
421 verbose
-log "$exec_output"
427 # objdump_versionstuff
428 # Dump version definitions
/references and make sure that it is sane.
430 proc objdump_versionstuff
{ objdump object expectfile
} {
431 global VOBJDUMP_FLAGS
432 global version_output
436 if {[which $objdump
] == 0} then {
437 perror
"$objdump does not exist"
441 if ![info exists VOBJDUMP_FLAGS
] { set VOBJDUMP_FLAGS
"" }
443 verbose
-log "$objdump $VOBJDUMP_FLAGS $object | sed -n /Version/,\\\$p > $tmpdir/objdump.out"
445 catch
"exec $objdump $VOBJDUMP_FLAGS $object | sed -n /Version/,\\\$p > $tmpdir/objdump.out" exec_output
446 set exec_output
[prune_warnings $exec_output
]
447 if [string match
"" $exec_output] then {
449 # It
's OK if there are extra lines in the actual output; they
450 # may come from version information in libc. We require that
451 # every line in EXPECTFILE appear in the output in any order.
453 set f2 [open $expectfile r]
454 while { [gets $f2 l2] != -1 } {
455 if { ![regexp "^#.*$" $l2] } then {
456 set f1 [open $tmpdir/objdump.out r]
457 while { [gets $f1 l1] != -1 } {
458 if { [string match $l2 $l1] } then {
464 if { ![string match $l2 $l1] } then {
465 verbose -log "Did not find \"$l2\""
466 set f1 [open $tmpdir/objdump.out r]
467 while { [gets $f1 l1] != -1 } {
479 verbose -log "$exec_output"
484 proc build_binary { shared pic test source libname other mapfile verexp versymexp symexp ldargs } {
496 global NOSANITIZE_CFLAGS
499 if ![ld_compile "$CC_FOR_TARGET -S $pic $NOSANITIZE_CFLAGS $NOLTO_CFLAGS" $srcdir/$subdir/$source $tmpdir/$libname.s] {
504 if ![ld_assemble $as "$as_options $tmpdir/$libname.s" $tmpdir/$libname.o ] {
510 if ![string match "" $other] then {
512 set other_lib "$other_lib $tmpdir/$o"
516 if [string match "" $mapfile] then {
519 set script_arg "$script $srcdir/$subdir/$mapfile"
522 if {![ld_link $ld $tmpdir/$libname.so "$shared $tmpdir/$libname.o $other_lib $script_arg $ldargs"]} {
527 if {![objdump_versionstuff $objdump $tmpdir/$libname.so $srcdir/$subdir/$verexp ]} {
532 if {![objdump_dynsymstuff $objdump $tmpdir/$libname.so $srcdir/$subdir/$versymexp ]} {
537 if [string match "" $symexp] then {
538 if {![objdump_emptysymstuff $objdump $tmpdir/$libname.o ]} {
543 if {![objdump_symstuff $objdump $tmpdir/$libname.o $srcdir/$subdir/$symexp ]} {
553 proc build_executable { test source libname other mapfile verexp versymexp symexp } {
554 build_binary "" "" $test $source $libname $other $mapfile $verexp $versymexp $symexp ""
557 proc build_vers_lib_no_pic { test source libname other mapfile verexp versymexp symexp } {
559 # Make sure that PLT is used since PLT is expected.
561 build_binary "$shared -z notext" $PLT_CFLAGS $test $source $libname $other $mapfile $verexp $versymexp $symexp ""
564 proc build_vers_lib_pic { test source libname other mapfile verexp versymexp symexp } {
567 build_binary $shared $picflag $test $source $libname $other $mapfile $verexp $versymexp $symexp ""
570 proc build_vers_lib_pic_flags { test source libname other mapfile verexp versymexp symexp ldargs } {
573 build_binary $shared $picflag $test $source $libname $other $mapfile $verexp $versymexp $symexp $ldargs
576 proc test_ldfail { test flag source execname other mapfile whyfail } {
588 if [string match "" $other] then {
591 set other_lib $tmpdir/$other
594 if ![ld_compile "$CC_FOR_TARGET -S $flag" $srcdir/$subdir/$source $tmpdir/$execname.s] {
599 if ![ld_assemble $as "$as_options $tmpdir/$execname.s" $tmpdir/$execname.o ] {
604 verbose -log "This link should fail because of $whyfail"
606 if [string match "" $mapfile] then {
609 set script_arg "-Wl,$script $srcdir/$subdir/$mapfile"
612 if {![ld_link $CC_FOR_TARGET $tmpdir/$execname "$tmpdir/$execname.o $other_lib $script_arg"]} {
619 proc test_asfail { test flag source execname whyfail } {
627 if ![ld_compile "$CC_FOR_TARGET -S $flag $NOLTO_CFLAGS" $srcdir/$subdir/$source $tmpdir/$execname.s] {
632 verbose -log "This assemble should fail because of $whyfail"
633 catch "exec $as -o $tmpdir/$execname.o $tmpdir/$execname.s" exec_output
634 set exec_output [prune_warnings $exec_output]
635 if [string match "" $exec_output] then {
639 verbose -log "$exec_output"
643 proc test_strip_vers_lib { test srclib libname verexp versymexp } {
652 if {! [file exists $tmpdir/$srclib] } then {
653 fail "$test ($tmpdir/$srclib does not exist)"
656 verbose -log "cp $tmpdir/$srclib $tmpdir/$libname.so"
657 exec cp $tmpdir/$srclib $tmpdir/$libname.so
659 verbose -log "$strip $tmpdir/$libname.so"
660 catch "exec $strip $tmpdir/$libname.so" exec_output
661 if [string match "" $exec_output] then {
663 # If strip went OK, then run the usual tests on the thing to make sure that
665 if {![objdump_versionstuff $objdump $tmpdir/$libname.so $srcdir/$subdir/$verexp ]} {
670 if {![objdump_dynsymstuff $objdump $tmpdir/$libname.so $srcdir/$subdir/$versymexp ]} {
676 verbose -log "$exec_output"
684 proc build_exec { test source execname flags solibname verexp versymexp symexp } {
694 global NOSANITIZE_CFLAGS
697 set shared "--shared --no-undefined-version"
698 set script --version-script
700 # Disable LTO for these tests.
701 set cc_cmd "$CC_FOR_TARGET -S"
702 if {[check_lto_available]} {
703 append cc_cmd " -fno-lto"
706 # Disable all sanitizers and LTO.
707 append cc_cmd " $NOSANITIZE_CFLAGS $NOLTO_CFLAGS"
709 if ![ld_compile $cc_cmd $srcdir/$subdir/$source $tmpdir/$execname.s] {
714 if ![ld_assemble $as "$as_options $tmpdir/$execname.s" $tmpdir/$execname.o ] {
719 if [string match "" $solibname] then {
722 set solibname_lib $tmpdir/$solibname
725 if {![ld_link $CC_FOR_TARGET $tmpdir/$execname "$flags $tmpdir/$execname.o $solibname_lib"]} {
730 if [string match "" $verexp] then {
732 # Make sure we get nothing back.
734 if {![objdump_emptyverstuff $objdump $tmpdir/$execname ]} {
739 if {![objdump_versionstuff $objdump $tmpdir/$execname $srcdir/$subdir/$verexp ]} {
745 if [string match "" $versymexp] then {
746 if {![objdump_emptydynsymstuff $objdump $tmpdir/$execname ]} {
751 if {![objdump_dynsymstuff $objdump $tmpdir/$execname $srcdir/$subdir/$versymexp ]} {
757 if [string match "" $symexp] then {
758 if {![objdump_emptysymstuff $objdump $tmpdir/$execname.o ]} {
763 if {![objdump_symstuff $objdump $tmpdir/$execname.o $srcdir/$subdir/$symexp ]} {
772 if { [istarget x86_64-*-linux*] \
773 || [istarget arm*-*-*] \
774 || ( [istarget mips*-*-linux*] && [at_least_gcc_version 4 3] ) } {
775 # x86_64, ARM and newer MIPS toolchains do not like non-pic shared libraries
782 # Basic test - build a library with versioned symbols.
784 build_vers_lib_pic "vers1" vers1.c vers1 "" vers1.map vers1.ver vers1.dsym vers1.sym
788 # Test #2 - build a library, and link it against the library we built in step
791 build_vers_lib_pic "vers2" vers2.c vers2 vers1.so vers2.map vers2.ver vers2.dsym ""
794 # Test #3 - build an executable, and link it against vers1.so.
796 build_exec "vers3" vers3.c vers3 "-Wl,--no-as-needed" vers1.so vers3.ver vers3.dsym ""
799 # Test #4 - Make sure a version implicitly defined in an executable
800 # causes a version node to be created. Verify this both with and without
804 # This test fails on MIPS. On the MIPS we must put foo in the dynamic
805 # symbol table, which the test does not expect.
806 setup_xfail "mips*-*-irix*"
807 build_exec "vers4" vers4.c vers4 "" "" "" "" vers4.sym
809 build_exec "vers4a" vers4.c vers4a "-Wl,-export-dynamic" "" vers4a.ver vers4a.dsym vers4a.sym
811 # Verify that --no-export-dynamic undoes the effect of --export-dynamic.
812 setup_xfail "mips*-*-irix*"
813 build_exec "vers4b" vers4.c vers4b "-Wl,-export-dynamic -Wl,--no-export-dynamic" "" "" "" vers4.sym
817 # Try multiple definitions foo@BAR and foo@@BAR and make sure the linker
820 test_ldfail "vers5" "" vers5.c vers5 "" "" "multiple definition of foo@VERS_1.2"
824 # Now build a test that should reference a bunch of versioned symbols.
825 # All of them should be correctly referenced.
827 build_exec "vers6" vers6.c vers6 "-Wl,--no-as-needed" vers1.so vers6.ver vers6.dsym vers6.sym
830 # Another test to verify that something made local via 'local
' is truly not
833 if [string match "yes" $pic] then {
837 build_vers_lib_no_pic "vers7a" vers7a.c vers7a "" vers7.map vers7a.ver vers7a.dsym vers7a.sym
839 test_ldfail "vers7" "" vers7.c vers7 vers7a.so "" "undefined reference to hide_a"
844 # This test is designed to verify that we can pass a linker script on the
845 # command line as if it were a normal .o file.
847 catch "exec cp $srcdir/$subdir/vers8.map $tmpdir/" ignore_output
848 build_vers_lib_pic "vers8" vers1.c vers8 vers8.map "" vers8.ver vers1.dsym vers1.sym
851 # This test tries to make sure that version references to versioned symbols
852 # don't collide with default definitions with the same symbol.
854 build_exec
"vers9" vers9.c vers9 "-Wl,-export-dynamic" "" vers9.ver vers9.dsym vers9.sym
858 # Try and use a non
-existant version node. The linker should fail with
861 test_ldfail
"vers10" "-DDO_TEST10" vers1.c vers10 "" "vers1.map --shared" "invalid version"
864 # Try and some things the assembler should complain about.
866 test_asfail
"vers11" "-DDO_TEST11" vers1.c vers11 "no @ in symver"
868 test_asfail
"vers12" "-DDO_TEST12" vers1.c vers12 "extern version definition"
871 # Put a shared library in an archive library
, and make sure the global
872 # archive symbol table is sane.
874 test_ar
"ar with versioned solib" vers13.a vers1.so vers13.asym
877 #
Strip a shared library
, and make sure we didn
't screw something up in there.
879 test_strip_vers_lib "vers14" vers1.so vers14 vers1.ver vers1.dsym
883 # Build another test with some versioned symbols. Here we are going to
884 # try and override something from the library, and we shouldn't
get
887 build_exec
"vers15" vers15.c vers15 "-Wl,--no-as-needed" vers1.so vers15.ver vers15.dsym vers15.sym
890 # Test that when we override a versioned symbol from the library this
891 # symbol appears in the dynamic symbol table of the executable.
893 build_vers_lib_pic
"vers16a" vers16a.c vers16a "" vers16.map vers16a.ver vers16a.dsym ""
894 build_exec
"vers16" vers16.c vers16 "-Wl,--no-as-needed" vers16a.so "" vers16.dsym ""
896 # Test a weak versioned symbol.
897 build_vers_lib_pic
"vers17" vers17.c vers17 "" vers17.map vers17.ver vers17.dsym ""
898 build_vers_lib_pic
"vers18" vers18.c vers18 vers17.so vers18.map vers18.ver vers18.dsym vers18.sym
899 build_exec
"vers19" vers19.c vers19 "-Wl,--no-as-needed,-rpath,.,-rpath-link,." vers18.so vers19.ver vers19.dsym ""
901 build_vers_lib_no_pic
"vers20a" vers20.c vers20a "" vers20.map vers20a.ver vers20.dsym ""
902 if {! [file
exists $tmpdir
/vers20a.so
] } then {
903 fail
"Building vers20a.so"
905 exec cp $tmpdir
/vers20a.so $tmpdir
/vers20b.so
906 build_vers_lib_no_pic
"vers20" vers20.c vers20 "vers20a.so vers20b.so" vers20.map vers20.ver vers20.dsym ""
909 # Test .symver override.
910 build_vers_lib_pic
"vers21" vers21.c vers21 "" vers21.map vers21.ver vers21.dsym vers21.sym
912 # Test moving default definition from one DSO to another.
913 build_vers_lib_pic
"vers22a" vers22a.c vers22a "" vers22.map vers22a.ver vers22a.dsym vers22a.sym
914 build_vers_lib_pic
"vers22b" vers22b.c vers22b "" vers22.map vers22b.ver vers22b.dsym ""
915 build_vers_lib_pic
"vers22" vers22.c vers22 "vers22a.so vers22b.so" "" vers22.ver vers22.dsym ""
917 # Test versioned definitions in different files.
918 if [string match
"yes" $pic] then {
925 build_vers_lib_no_pic
"vers23a" vers23a.c vers23a "" vers23a.map vers23a.ver vers23a.dsym vers23a.sym
926 build_vers_lib_no_pic
"vers23b" vers23b.c vers23b "" vers23b.map vers23b.ver vers23b.dsym ""
927 build_vers_lib_no_pic
"vers23c" vers23b.c vers23c "vers23a.so" vers23b.map vers23c.ver vers23b.dsym ""
928 build_exec
"vers23d" vers23.c vers23d "-Wl,--no-as-needed tmpdir/vers23a.so tmpdir/vers23c.so" "" vers23.ver vers23d.dsym ""
929 build_exec
"vers23" vers23.c vers23 "-Wl,--no-as-needed tmpdir/vers23a.so tmpdir/vers23b.o tmpdir/vers23b.so" "" vers23.ver vers23.dsym ""
932 # Test .symver x
,x@VERS
.0
934 if [istarget sparc
*-*-*] {
935 set as_pic_flags
"-K PIC"
937 run_ld_link_tests
[list
"\"vers24a\"
938 \"-shared
--version
-script $srcdir
/$subdir
/vers24.map
\" \"\"
939 \"$as_pic_flags $as_options
\" {vers24a.c vers24b.c
} { { readelf
-Wrs vers24.rd
} }
940 \"libvers24a.so
\" \"-fpic
\""]
941 run_ld_link_tests
[list
"\"vers24b\"
942 \"-shared
--version
-script $srcdir
/$subdir
/vers24.map
\" \"\"
943 \"$as_pic_flags $as_options
\" {vers24b.c vers24a.c
} { { readelf
-Wrs vers24.rd
} }
944 \"libvers24b.so
\" \"-fpic
\""]
945 run_ld_link_tests
[list
"\"vers24c\"
946 \"-shared
--version
-script $srcdir
/$subdir
/vers24.map
\" \"\"
947 \"$as_pic_flags $as_options
\" {vers24c.c
} { { readelf
-Wrs vers24.rd
} }
948 \"libvers24c.so
\" \"-fpic
\""]
950 # Test versioned definition vs.
normal definition in different files.
951 if [string match
"yes" $pic] then {
956 build_vers_lib_no_pic
"vers25a" vers25a.c vers25a "" vers25a.map vers25a.ver vers25a.dsym ""
957 build_vers_lib_no_pic
"vers25b1" vers25b.c vers25b1 "vers25a.o vers25a.so" "" vers25b.ver vers25b.dsym ""
958 build_vers_lib_no_pic
"vers25b2" vers25b.c vers25b2 "vers25a.so vers25a.o" "" vers25b.ver vers25b.dsym ""
961 build_vers_lib_pic
"vers26a" vers26a.c vers26a "" vers26a.map vers26a.ver vers26a.dsym ""
962 build_vers_lib_pic
"vers26b1" vers26b.c vers26b1 "" "" vers26b.ver vers26b.dsym ""
963 build_vers_lib_pic
"vers26b2" vers26b.c vers26b2 "vers26a.so vers26b1.so vers26a.o" "" vers26b.ver vers26b.dsym ""
964 if [string match
"yes" $pic] then {
967 build_vers_lib_no_pic
"vers26b3" vers26b.c vers26b3 "vers26a.so vers26b1.so vers26a.o" "" vers26b.ver vers26b.dsym ""
970 # Test versioned definition vs. hidden definition in different files.
971 if [string match
"yes" $pic] then {
982 build_vers_lib_no_pic
"vers27a" vers27a.c vers27a "" vers27a.map vers27a.ver vers27a.dsym ""
983 build_vers_lib_no_pic
"vers27b" vers27b.c vers27b "" "" vers27b.ver vers27b.dsym ""
984 build_vers_lib_no_pic
"vers27c1" vers27c.c vers27c1 "vers27b.o vers27a.so" "" vers27c.ver vers27c.dsym ""
985 build_vers_lib_no_pic
"vers27c2" vers27c.c vers27c2 "vers27a.so vers27b.o" "" vers27c.ver vers27c.dsym ""
986 build_vers_lib_pic
"vers27d1" vers27d1.c vers27d1 "" vers27a.map vers27d.ver vers27d.dsym vers27d.sym
987 build_vers_lib_pic
"vers27d2" vers27d2.c vers27d2 "" "" vers27b.ver vers27b.dsym ""
988 build_executable
"vers27d3" vers27d3.c vers27d3 "vers27b.o vers27d2.so vers27d1.so" "" vers27b.ver vers27b.dsym ""
989 build_vers_lib_pic
"vers27d4" vers27d2.c vers27d4 "vers27a.so" "" vers27d4.ver vers27d4.dsym ""
990 build_executable
"vers27d5" vers27d3.c vers27d5 "vers27d4.so vers27b.o vers27a.so" "" vers27b.ver vers27b.dsym ""
993 # Test weak versioned definition vs. strong definition in different
995 build_vers_lib_pic
"vers28a" vers28a.c vers28a "" "" vers28a.ver vers28a.dsym ""
996 build_vers_lib_pic
"vers28b" vers28b.c vers28b "" vers28b.map vers28b.ver vers28b.dsym ""
997 build_vers_lib_pic
"vers28c" vers28c.c vers28c "vers28b.so vers28a.so" "" vers28c.ver vers28c.dsym ""
998 build_vers_lib_pic_flags
"vers29" vers29.c vers29 "" "" vers29.ver vers29.dsym "" "--default-symver"
1000 # Test #
30 - test handling of symbol names global
, local and extern in the
1002 build_vers_lib_pic
"vers30" vers30.c vers30 "" vers30.map vers30.ver vers30.dsym ""
1004 # Test #
31 -- quoted strings in version sections.
1005 build_vers_lib_pic
"vers31" vers31.c vers31 "" vers31.map vers31.ver vers31.dsym ""
1007 # Test #
32 -- linker
--defsym
1008 build_vers_lib_pic
"vers32a" vers32a.c vers32a "" vers32.map vers32a.ver vers32a.dsym ""
1009 build_vers_lib_pic_flags
"vers32b" vers32b.c vers32b "vers32a.so" vers32.map vers32b.ver vers32b.dsym "" "--defsym foo=0"