Change name of the launcher from "Chrome Apps Launcher" to "Chrome App Launcher".

[chromium-blink-merge.git] / third_party / lcov / descriptions.tests

personality01  
        Check that we can set the personality for a process.
personality02  
        Check that we get EINVAL for a bad personality.
exit01  
        Check that exit returns the correct values to the waiting parent
exit02  
        Check that exit flushes output file buffers and closes files upon
        exiting
wait02
        Basic test for wait(2) system call. 
wait401  
        check that a call to wait4() correctly waits for a child
        process to exit
wait402  
        check for ECHILD errno when using an illegal pid value

waitpid01  
        Check that when a child kills itself by generating an alarm
        exception, the waiting parent is correctly notified.
waitpid02  
        Check that when a child kills itself by generating an integer zero
        divide exception, the waiting parent is correctly notified.
waitpid03  
        Check that parent waits until specific child has returned.
waitpid04  
        test to check the error conditions in waitpid sys call
waitpid05  
        Check that when a child kills itself with a kill statement after
        determining its process id by using getpid, the parent receives a
        correct report of the cause of its death. This also indirectly
        checks that getpid returns the correct process id.
waitpid06  
        Tests to see if pid's returned from fork and waitpid are same.
waitpid07  
        Tests to see if pid's returned from fork and waitpid are same.
waitpid08  
        Tests to see if pid's returned from fork and waitpid are same
waitpid09  
        Check ability of parent to wait until child returns, and that the
        child's process id is returned through the waitpid. Check that
        waitpid returns immediately if no child is present.
waitpid10  
        Tests to see if pid's returned from fork and waitpid are same
waitpid11  
        Tests to see if pid's returned from fork and waitpid are same
waitpid12  
        Tests to see if pid's returned from fork and waitpid are same
waitpid13  
        Tests to see if pid's returned from fork and waitpid are same
fcntl01  
        Test F_DUPFD, F_SETFL cmds of fcntl
fcntl02
        Basic test for fcntl(2) using F_DUPFD argument.
fcntl03
        Basic test for fcntl(2) using F_GETFD argument.
fcntl04
        Basic test for fcntl(2) using F_GETFL argument. 
fcntl05
        Basic test for fcntl(2) using F_GETLK argument. 
fcntl06  
        Error checking conditions for remote locking of regions of a file.
fcntl07
        Close-On-Exec functional test. 
fcntl07B
        Close-On-Exec of named pipe functional test. 
fcntl08
        Basic test for fcntl(2) using F_SETFL argument. 
fcntl09
        Basic test for fcntl(2) using F_SETLK argument. 
fcntl10
        Basic test for fcntl(2) using F_SETLKW argument. 
fcntl11  
        Testcase to check locking of regions of a file

fcntl12  

        Testcase to test that fcntl() sets EMFILE for F_DUPFD command.

fcntl13  

        Testcase to test that fcntl() sets errno correctly.

fcntl14  

        File locking test cases for fcntl. In Linux, S_ENFMT is not implemented
        in the kernel. However all standard Unix kernels define S_ENFMT as
        S_ISGID. So this test defines S_ENFMT as S_ISGID.

fcntl15  

        Check that file locks are removed when file closed

fcntl16  

        Additional file locking test cases for checking proper notification
        of processes on lock change

fcntl17  

        Check deadlock detection for file locking

fcntl18  

        Test to check the error conditions in fcntl system call

fcntl19  

        Testcase to check locking of regions of a file

fcntl20  

        Check locking of regions of a file

fcntl21  

        Check locking of regions of a file

dup01           

        Basic test for dup(2).

dup02                   

        Negative test for dup(2) with bad fd.

dup03

        Negative test for dup(2) (too many fds).

dup04

        Basic test for dup(2) of a system pipe descriptor.

dup05

        Basic test for dup(2) of a named pipe descriptor. 

dup201  

        Negative tests for dup2() with bad fd (EBADF), and for "too many
        open files" (EMFILE)

dup202  

        Is the access mode the same for both file descriptors?
        0: read only ?  "0444"
        1: write only ? "0222"
        2: read/write ? "0666"

dup203  

        Testcase to check the basic functionality of dup2().

dup204  

        Testcase to check the basic functionality of dup2(2).


msync01  

        Verify that, msync() succeeds, when the region to synchronize, is part
        of, or all of a mapped region.

msync02  

        Verify that msync() succeeds when the region to synchronize is mapped
        shared and the flags argument is MS_INVALIDATE.

msync03  

        Verify that, msync() fails, when the region to synchronize, is outside
        the address space of the process.

msync04  

        Verify that, msync() fails, when the region to synchronize, is mapped
        but the flags argument is invalid.

msync05  

        Verify that, msync() fails, when the region to synchronize, was not
        mapped.


sendfile02  

        Testcase to test the basic functionality of the sendfile(2) system call.

sendfile03  

        Testcase to test that sendfile(2) system call returns appropriate
        errnos on error.

fork01
        Basic test for fork(2). 
fork02  
        Test correct operation of fork:
        pid == 0 in child;
        pid > 0 in parent from wait;
fork03  
        Check that child can use a large text space and do a large
        number of operations.   
fork04
        Child inheritance of Environment Variables after fork(). 
fork05
        Make sure LDT is propagated correctly 
fork06  
        Test that a process can fork children a large number of
        times in succession
fork07  
        Check that all children inherit parent's file descriptor
fork08  
        Check if the parent's file descriptors are affected by 
        actions in the child; they should not be.
fork09  
        Check that child has access to a full set of files.
fork10  
        Check inheritance of file descriptor by children, they
        should all be referring to the same file.
fork11  
        Test that parent gets a pid from each child when doing wait
vfork01  
        Fork a process using vfork() and verify that, the attribute values like
        euid, ruid, suid, egid, rgid, sgid, umask, inode and device number of
        root and current working directories are same as that of the parent 
        process.
vfork02  
        Fork a process using vfork() and verify that, the pending signals in
        the parent are not pending in the child process.
ioctl01  

        Testcase to check the errnos set by the ioctl(2) system call.

ioctl02  

        Testcase to test the TCGETA, and TCSETA ioctl implementations for
        the tty driver

sockioctl01  

        Verify that ioctl() on sockets returns the proper errno for various
        failure cases

getitimer01
        check that a correct call to getitimer() succeeds


getitimer02
        check that a getitimer() call fails as expected
        with an incorrect second argument.

getitimer03
        check that a getitimer() call fails as expected
        with an incorrect first argument.

setitimer01
        check that a reasonable setitimer() call succeeds.


setitimer02
        check that a setitimer() call fails as expected
        with incorrect values.

setitimer03
        check that a setitimer() call fails as expected
        with incorrect values.

float_trigo
        increase CPUs workload - verify that results of some math functions are stable
        trigonometric (acos, asin, atan, atan2, cos, sin, tan),
        hyperbolic (cosh, sinh, tanh),

float_exp_log
        increase CPUs workload - verify that results of some math functions are stable
        exponential and logarithmic functions (exp, log, log10),
        Functions that manipulate floating-point numbers (modf, ldexp, frexp),
        Euclidean distance function (hypot),

float_bessel
        increase CPUs workload - verify that results of some math functions are stable
        Bessel (j0, j1, y0, y1),
        Computes the natural logarithm of the gamma function (lgamma),

fload_power
        increase CPUs workload - verify that results of some math functions are stable
        Computes sqrt, power, fmod

float_iperb
        increase CPUs workload - verify that results of some math functions are stable
pth_str01

        Creates a tree of threads

pth_str02

        Creates n threads

pth_str03

        Creates a tree of threads does calculations, and
        returns result to parent


asyncio02

        Write/close flushes data to the file.


fpathconf

        Basic test for fpathconf(2)

gethostid01

        Basic test for gethostid(2) 


pathconf01

        Basic test for pathconf(2) 

setpgrp01

        Basic test for the setpgrp(2) system call.  

setpgrp02  

        Testcase to check the basic functionality of the setpgrp(2) syscall.


ulimit01

        Basic test for the ulimit(2) system call. 

mmstress

        Performs General Stress with Race conditions

mmap1

        Test the LINUX memory manager. The program is aimed at
        stressing the memory manager by simultaneous map/unmap/read
        by light weight processes, the test is scheduled to run for
        a minimum of 24 hours.

mmap2

        Test the LINUX memory manager. The program is aimed at
        stressing the memory manager by repeated map/write/unmap of a
        of a large gb size file.

mmap3

        Test the LINUX memory manager. The program is aimed at
        stressing the memory manager by repeated map/write/unmap
        of file/memory of random size (maximum 1GB) this is done by
        multiple processes.

mmap001

        Tests mmapping a big file and writing it once 

mmap01  

        Verify that, mmap() succeeds when used to map a file where size of the
        file is not a multiple of the page size, the memory area beyond the end
        of the file to the end of the page is accessible. Also, verify that
        this area is all zeroed and the modifications done to this area are
        not written to the file.

mmap02  

        Call mmap() with prot parameter set to PROT_READ and with the file
        descriptor being open for read, to  map a file creating mapped memory
        with read access. The minimum file permissions should be 0444.

mmap03  

        Call mmap() to map a file creating a mapped region with execute access
        under the following conditions -
        - The prot parameter is set to PROT_EXE
        - The file descriptor is open for read
        - The file being mapped has execute permission bit set.
        - The minimum file permissions should be 0555.

        The call should succeed to map the file creating mapped memory with the
        required attributes.

mmap04  

        Call mmap() to map a file creating a mapped region with read/exec access
        under the following conditions -
        - The prot parameter is set to PROT_READ|PROT_EXEC
        - The file descriptor is open for read
        - The file being mapped has read and execute permission bit set.
        - The minimum file permissions should be 0555.

        The call should succeed to map the file creating mapped memory with the
        required attributes.


mmap05  

        Call mmap() to map a file creating mapped memory with no access under
        the following conditions -
        - The prot parameter is set to PROT_NONE
        - The file descriptor is open for read(any mode other than write)
        - The minimum file permissions should be 0444.

        The call should succeed to map the file creating mapped memory with the
        required attributes.

mmap06  

        Call mmap() to map a file creating a mapped region with read access
        under the following conditions -
        - The prot parameter is set to PROT_READ
        - The file descriptor is open for writing.

        The call should fail to map the file.


mmap07  

        Call mmap() to map a file creating a mapped region with read access
        under the following conditions -
        - The prot parameter is set to PROT_WRITE
        - The file descriptor is open for writing.
        - The flags parameter has MAP_PRIVATE set.

        The call should fail to map the file.

mmap08  

        Verify that mmap() fails to map a file creating a mapped region 
        when the file specified by file descriptor is not valid.


mremap01  

        Verify that, mremap() succeeds when used to expand the existing
        virtual memory mapped region to the requested size where the
        virtual memory area was previously mapped to a file using mmap().

mremap02  

        Verify that, 
        mremap() fails when used to expand the existing virtual memory mapped 
        region to the requested size, if the virtual memory area previously 
        mapped was not page aligned or invalid argument specified.

mremap03  

        Verify that, 
        mremap() fails when used to expand the existing virtual memory mapped 
        region to the requested size, if there already exists mappings that
        cover the whole address space requested or the old address specified was
        not mapped.

mremap04  

        Verify that, 
        mremap() fails when used to expand the existing virtual memory mapped 
        region to the requested size, if the memory area cannot be expanded at
        the current virtual address and MREMAP_MAYMOVE flag not set.

munmap01  

        Verify that, munmap call will succeed to unmap a mapped file or
        anonymous shared memory region from the calling process's address space
        and after successful completion of munmap, the unmapped region is no
        longer accessible.

munmap02  

        Verify that, munmap call will succeed to unmap a mapped file or
        anonymous shared memory region from the calling process's address space
        if the region specified by the address and the length is part or all of
        the mapped region.

munmap03  

        Verify that, munmap call will fail to unmap a mapped file or anonymous
        shared memory region from the calling process's address space if the
        address and the length of the region to be unmapped points outside the
        calling process's address space

brk01
        Test the basic functionality of brk.

sbrk01
        Basic test for the sbrk(2) system call.


mprotect01  

        Testcase to check the error conditions for mprotect(2)

mprotect02  

        Testcase to check the mprotect(2) system call.

mprotect03  

        Testcase to check the mprotect(2) system call.

msgctl01 
        create a message queue, then issue the IPC_STAT command
        and RMID commands to test the functionality


msgctl02 
        create a message queue, then issue the IPC_SET command
        to lower the msg_qbytes value.


msgctl03
        create a message queue, then issue the IPC_RMID command



msgctl04 
        test for EACCES, EFAULT and EINVAL errors using
        a variety of incorrect calls.


msgctl05 
        test for EPERM error



msgget01 
        create a message queue, write a message to it and
        read it back.


msgget02 
        test for EEXIST and ENOENT errors


msgget03 
        test for an ENOSPC error by using up all available
        message queues.

msgget04 
        test for an EACCES error by creating a message queue
        with no read or write permission and then attempting
        to access it with various permissions.

msgrcv01 
        test that msgrcv() receives the expected message

msgrcv02
        test for EACCES and EFAULT errors

msgrcv03
        test for EINVAL error

msgrcv04
        test for E2BIG and ENOMSG errors

msgrcv05
        test for EINTR error

msgrcv06
        test for EIDRM error

msgsnd01
        test that msgsnd() enqueues a message correctly

msgsnd02
        test for EACCES and EFAULT errors

msgsnd03
        test for EINVAL error

msgsnd04
        test for EAGAIN error

msgsnd05
        test for EINTR error


msgsnd06
        test for EIDRM error

link02

        Basic test for link(2) 

link03

        Multi links tests

link04

        Negative test cases for link(2)

link05

        Multi links (EMLINK) negative test 

readlink01  

        Verify that, readlink will succeed to read the contents of the symbolic
        link created the process.

readlink02

        Basic test for the readlink(2) system call 

readlink03  

        Verify that,
        1) readlink(2) returns -1 and sets errno to EACCES if search/write
        permission is denied in the directory where the symbolic link
        resides.
        2) readlink(2) returns -1 and sets errno to EINVAL if the buffer size
        is not positive.
        3) readlink(2) returns -1 and sets errno to EINVAL if the specified
        file is not a symbolic link file.
        4) readlink(2) returns -1 and sets errno to ENAMETOOLONG if the 
        pathname component of symbolic link is too long (ie, > PATH_MAX).
        5) readlink(2) returns -1 and sets errno to ENOENT if the component of
        symbolic link points to an empty string.

readlink04  

        Verify that, readlink call will succeed to read the contents of the
        symbolic link if invoked by non-root user who is not the owner of the
        symbolic link.


symlink01

        Test of various file function calls, such as rename or open, on a symbolic 
        link file. 

symlink02

        Basic test for the symlink(2) system call. 

symlink03  

        Verify that,
        1) symlink(2) returns -1 and sets errno to EACCES if search/write
        permission is denied in the directory where the symbolic link is
        being created.
        2) symlink(2) returns -1 and sets errno to EEXIST if the specified 
        symbolic link already exists.
        3) symlink(2) returns -1 and sets errno to EFAULT if the specified
        file or symbolic link points to invalid address.
        4) symlink(2) returns -1 and sets errno to ENAMETOOLONG if the 
        pathname component of symbolic link is too long (ie, > PATH_MAX).
        5) symlink(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname of symbolic link is not a directory.
        6) symlink(2) returns -1 and sets errno to ENOENT if the component of
        symbolic link points to an empty string.

symlink04  

        Verify that, symlink will succeed to create a symbolic link of an existing
        object name path.


symlink05  

        Verify that, symlink will succeed to create a symbolic link of an
        non-existing object name path.


unlink05

        Basic test for the unlink(2) system call. 

unlink06

        Test for the unlink(2) system call of a FIFO. 

unlink07

        Tests for error handling for the unlink(2) system call. 

unlink08

        More tests for error handling for the unlink(2) system call.


linktest

        Regression test for max links per file

rename01  

        This test will verify the rename(2) syscall basic functionality.
        Verify rename() works when the "new" file or directory does not exist.

rename02

        Basic test for the rename(2) system call

rename03  

        This test will verify that rename(2) functions correctly
        when the "new" file or directory exists

rename04  

        This test will verify that rename(2) failed when newpath is 
        a non-empty directory and return EEXIST or ENOTEMPTY

rename05  

        This test will verify that rename(2) fails with EISDIR

rename06  

        This test will verify that rename(2) failed in EINVAL

rename07  

        This test will verify that rename(2) failed in ENOTDIR

rename08  

        This test will verify that rename(2) syscall failed in EFAULT

rename09  

        check rename() fails with EACCES

rename10  

        This test will verify that rename(2) syscall fails with ENAMETOOLONG
        and ENOENT

rename11  

        This test will verify that rename(2) failed in EBUSY

rename12  

        check rename() fails with EPERM

rename13  

        Verify rename() return successfully and performs no other action
        when "old" file and "new" file link to the same file.

rmdir01  

        This test will verify that rmdir(2) syscall basic functionality.
        verify rmdir(2) returns a value of 0 and the directory being
        removed 

rmdir02  

        This test will verify that rmdir(2) fail in 
        1. ENOTEMPTY
        2. EBUSY
        3. ENAMETOOLONG
        4. ENOENT
        5. ENOTDIR
        6. EFAULT
        7. EFAULT

rmdir03  

        check rmdir() fails with EPERM or EACCES

rmdir04

        Basic test for the rmdir(2) system call 

rmdir05

        Verify that rmdir(2) returns a value of -1 and sets errno to indicate the error.



mkdir01

        Basic errno test for mkdir(2) 

mkdir02  

        This test will verify that new directory created
        by mkdir(2) inherits the group ID from the parent
        directory and S_ISGID bit, if the S_ISGID bit is set
        in the parent directory.

mkdir03  

        Check mkdir() with various error conditions that should produce
        EFAULT, ENAMETOOLONG, EEXIST, ENOENT and ENOTDIR

mkdir04  

        Attempt to create a directory in a directory having no permissions. 

mkdir05  

        This test will verify the mkdir(2) syscall basic functionality

mkdir08

        Basic test for mkdir(2)


mknod01

        Basic test for mknod(2) 

mknod02  

        Verify that mknod(2) succeeds when used to create a filesystem 
        node with set group-ID bit set on a directory without set group-ID bit set.
        The node created should have set group-ID bit set and its gid should be 
        equal to that of its parent directory.

mknod03  

        Verify that mknod(2) succeeds when used to create a filesystem 
        node with set group-ID bit set on a directory with set group-ID bit set.
        The node created should have set group-ID bit set and its gid should be 
        equal to the effective gid of the process.

mknod04  

        Verify that mknod(2) succeeds when used to create a filesystem 
        node on a directory with set group-ID bit set.
        The node created should not have group-ID bit set and its gid should be 
        equal to the effective gid of the process.

mknod05  

        Verify that mknod(2) succeeds when used by root to create a filesystem 
        node with set group-ID bit set on a directory with set group-ID bit set.
        The node created should have set group-ID bit set and its gid should be 
        equal to that of its parent directory.


mknod06  

        Verify that,
        1) mknod(2) returns -1 and sets errno to EEXIST if specified path
        already exists.
        2) mknod(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        3) mknod(2) returns -1 and sets errno to ENOENT if the directory 
        component in pathname does not exist.
        4) mknod(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
        component was too long.
        5) mknod(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname is not a directory.

mknod07  

        Verify that,
        1) mknod(2) returns -1 and sets errno to EPERM if the process id of
        the caller is not super-user.
        2) mknod(2) returns -1 and sets errno to EACCES if parent directory
        does not allow  write  permission  to  the process.

mknod08  

        Verify that mknod(2) succeeds when used to create a filesystem 
        node on a directory without set group-ID bit set. The node created
        should not have set group-ID bit set and its gid should be equal to that
        of its parent directory.




access01

        Basic test for access(2) using F_OK, R_OK, W_OK, and X_OK  arguments.

access02  

        Verify that access() succeeds to check the read/write/execute permissions
        on a file if the mode argument passed was R_OK/W_OK/X_OK.

        Also verify that, access() succeeds to test the accessibility of the file
        referred to by symbolic link if the pathname points to a symbolic link.

access03

        EFAULT error testing for access(2).

access04  

        Verify that,
        1. access() fails with -1 return value and sets errno to EACCES
        if the permission bits of the file mode do not permit the
        requested (Read/Write/Execute) access.
        2. access() fails with -1 return value and sets errno to EINVAL
        if the specified access mode argument is invalid.
        3. access() fails with -1 return value and sets errno to EFAULT
        if the pathname points outside allocate address space for the
        process.
        4. access() fails with -1 return value and sets errno to ENOENT
        if the specified file doesn't exist (or pathname is NULL).
        5. access() fails with -1 return value and sets errno to ENAMETOOLONG
        if the pathname size is > PATH_MAX characters.

access05  

        Verify that access() succeeds to check the existence of a file if
        search access is permitted on the pathname of the specified file.

access06

        EFAULT error testing for access(2).

chroot01  

        Testcase to check the whether chroot sets errno to EPERM.

chroot02  

        Test functionality of chroot(2)

chroot03  

        Testcase to test whether chroot(2) sets errno correctly.

pipeio

        This tool can be used to beat on system or named pipes.
        See the help() function below for user information.

pipe01  

        Testcase to check the basic functionality of the pipe(2) syscall:
        Check that both ends of the pipe (both file descriptors) are
        available to a process opening the pipe.

pipe05  

        Check what happens when pipe is passed a bad file descriptor.

pipe06  

        Check what happens when the system runs out of pipes.

pipe08  

        Check that a SIGPIPE signal is generated when a write is
        attempted on an empty pipe.

pipe09  

        Check that two processes can use the same pipe at the same time.

pipe10  

        Check that parent can open a pipe and have a child read from it

pipe11  

        Check if many children can read what is written to a pipe by the
        parent.


sem01

        Creates a semaphore and two processes.  The processes
        each go through a loop where they semdown, delay for a
        random amount of time, and semup, so they will almost
        always be fighting for control of the semaphore.

sem02
        The application creates several threads using pthread_create().
        One thread performs a semop() with the SEM_UNDO flag set. The
        change in semaphore value performed by that semop should be
        "undone" only when the last pthread exits.


semctl01  

        test the 10 possible semctl() commands

semctl02  

        test for EACCES error

semctl03  

        test for EINVAL and EFAULT errors

semctl04 

        test for EPERM error


semctl05

        test for ERANGE error

semget01

        test that semget() correctly creates a semaphore set

semget02 

        test for EACCES and EEXIST errors

semget03 

        test for ENOENT error

semget05 

        test for ENOSPC error

semget06

        test for EINVAL error

semop01 

        test that semop() basic functionality is correct

semop02

        test for E2BIG, EACCES, EFAULT and EINVAL errors

semop03

        test for EFBIG error

semop04

        test for EAGAIN error

semop05

        test for EINTR and EIDRM errors



msgctl01 
        create a message queue, then issue the IPC_STAT command
        and RMID commands to test the functionality


msgctl02 
        create a message queue, then issue the IPC_SET command
        to lower the msg_qbytes value.


msgctl03
        create a message queue, then issue the IPC_RMID command



msgctl04 
        test for EACCES, EFAULT and EINVAL errors using
        a variety of incorrect calls.


msgctl05 
        test for EPERM error



msgget01 
        create a message queue, write a message to it and
        read it back.


msgget02 
        test for EEXIST and ENOENT errors


msgget03 
        test for an ENOSPC error by using up all available
        message queues.

msgget04 
        test for an EACCES error by creating a message queue
        with no read or write permission and then attempting
        to access it with various permissions.

msgrcv01 
        test that msgrcv() receives the expected message

msgrcv02
        test for EACCES and EFAULT errors

msgrcv03
        test for EINVAL error

msgrcv04
        test for E2BIG and ENOMSG errors

msgrcv05
        test for EINTR error

msgrcv06
        test for EIDRM error

msgsnd01
        test that msgsnd() enqueues a message correctly

msgsnd02
        test for EACCES and EFAULT errors

msgsnd03
        test for EINVAL error

msgsnd04
        test for EAGAIN error

msgsnd05
        test for EINTR error


msgsnd06
        test for EIDRM error

shmat01
        test that shmat() works correctly

shmat02
        check for EINVAL and EACCES errors


shmat03
        test for EACCES error


shmctl01
        test the IPC_STAT, IPC_SET and IPC_RMID commands as
        they are used with shmctl()


shmctl02
        check for EACCES, EFAULT and EINVAL errors


shmctl03
        check for EACCES, and EPERM errors


shmdt01
        check that shared memory is detached correctly


shmdt02
        check for EINVAL error


shmget01
        test that shmget() correctly creates a shared memory segment


shmget02
        check for ENOENT, EEXIST and EINVAL errors


shmget03
        test for ENOSPC error


shmget04
        test for EACCES error


shmget05
        test for EACCES error

openfile

        Creates files and opens simultaneously

open01  

        Open a file with oflag = O_CREAT set, does it set the sticky bit off?

        Open "/tmp" with O_DIRECTORY, does it set the S_IFDIR bit on?

open02  

        Test if open without O_CREAT returns -1 if a file does not exist.

open03

        Basic test for open(2)  

open04  

        Testcase to check that open(2) sets EMFILE if a process opens files
        more than its descriptor size

open05  

        Testcase to check open(2) sets errno to EACCES correctly.

open06  

        Testcase to check open(2) sets errno to ENXIO correctly.

open07  

        Test the open(2) system call to ensure that it sets ELOOP correctly.

open08  

        Check for the following errors:
        1.      EEXIST
        2.      EISDIR
        3.      ENOTDIR
        4.      ENAMETOOLONG
        5.      EFAULT
        6.      ETXTBSY


openfile

        Creates files and opens simultaneously


chdir01  

        Check proper operation of chdir(): tests whether the
        system call can it change the current, working directory, and find a
        file there? Will it fail on a non-directory entry ?

chdir02         

        Basic test for chdir(2).

chdir03  

        Testcase for testing that chdir(2) sets EACCES errno

chdir04  

        Testcase to test whether chdir(2) sets errno correctly.


chmod01  

        Verify that, chmod(2) succeeds when used to change the mode permissions
        of a file. 

chmod02

        Basic test for chmod(2).

chmod03  

        Verify that, chmod(2) will succeed to change the mode of a file
        and set the sticky bit on it if invoked by non-root (uid != 0)
        process with the following constraints,
        - the process is the owner of the file.
        - the effective group ID or one of the supplementary group ID's of the
        process is equal to the group ID of the file.

chmod04  

        Verify that, chmod(2) will succeed to change the mode of a directory
        and set the sticky bit on it if invoked by non-root (uid != 0) process
        with the following constraints,
        - the process is the owner of the directory.
        - the effective group ID or one of the supplementary group ID's of the
        process is equal to the group ID of the directory.

chmod05  

        Verify that, chmod(2) will succeed to change the mode of a directory
        but fails to set the setgid bit on it if invoked by non-root (uid != 0)
        process with the following constraints,
        - the process is the owner of the directory.
        - the effective group ID or one of the supplementary group ID's of the
        process is not equal to the group ID of the directory.

chmod06  

        Verify that,
        1) chmod(2) returns -1 and sets errno to EPERM if the effective user id
        of process does not match the owner of the file and the process is
        not super user.
        2) chmod(2) returns -1 and sets errno to EACCES if search permission is
        denied on a component of the path prefix.
        3) chmod(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        4) chmod(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
        component is too long.
        5) chmod(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname is not a directory.
        6) chmod(2) returns -1 and sets errno to ENOENT if the specified file
        does not exists.

chmod07  

        Verify that, chmod(2) will succeed to change the mode of a file/directory
        and sets the sticky bit on it if invoked by root (uid = 0) process with
        the following constraints,
        - the process is not the owner of the file/directory.
        - the effective group ID or one of the supplementary group ID's of the
        process is equal to the group ID of the file/directory.


chown01

        Basic test for chown(2).

chown02  

        Verify that, when chown(2) invoked by super-user to change the owner and
        group of a file specified by path to any numeric owner(uid)/group(gid)
        values,
        - clears setuid and setgid bits set on an executable file.
        - preserves setgid bit set on a non-group-executable file.

chown03  

        Verify that, chown(2) succeeds to change the group of a file specified
        by path when called by non-root user with the following constraints,
        - euid of the process is equal to the owner of the file.         
        - the intended gid is either egid, or one of the supplementary gids
        of the process.
        Also, verify that chown() clears the setuid/setgid bits set on the file.

chown04  

        Verify that,
        1) chown(2) returns -1 and sets errno to EPERM if the effective user id
        of process does not match the owner of the file and the process is
        not super user.
        2) chown(2) returns -1 and sets errno to EACCES if search permission is
        denied on a component of the path prefix.
        3) chown(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        4) chown(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
        component is too long.
        5) chown(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname is not a directory.
        6) chown(2) returns -1 and sets errno to ENOENT if the specified file
        does not exists.

chown05  

        Verify that, chown(2) succeeds to change the owner and group of a file
        specified by path to any numeric owner(uid)/group(gid) values when invoked 
        by super-user.


close01  

        Test that closing a regular file and a pipe works correctly

close02  

        Check that an invalid file descriptor returns EBADF

close08

        Basic test for close(2).


fchdir01  

        create a directory and cd into it.

fchdir02  

        try to cd into a bad directory (bad fd).


fchmod01

        Basic test for Fchmod(2).

fchmod02  

        Verify that, fchmod(2) will succeed to change the mode of a file/directory
        set the sticky bit on it if invoked by root (uid = 0) process with
        the following constraints,
        - the process is not the owner of the file/directory.
        - the effective group ID or one of the supplementary group ID's of the
        process is equal to the group ID of the file/directory.

fchmod03  

        Verify that, fchmod(2) will succeed to change the mode of a file
        and set the sticky bit on it if invoked by non-root (uid != 0)
        process with the following constraints,
        - the process is the owner of the file.
        - the effective group ID or one of the supplementary group ID's of the
        process is equal to the group ID of the file.

fchmod04  

        Verify that, fchmod(2) will succeed to change the mode of a directory
        and set the sticky bit on it if invoked by non-root (uid != 0) process
        with the following constraints,
        - the process is the owner of the directory.
        - the effective group ID or one of the supplementary group ID's of the
        process is equal to the group ID of the directory.

fchmod05  

        Verify that, fchmod(2) will succeed to change the mode of a directory
        but fails to set the setgid bit on it if invoked by non-root (uid != 0)
        process with the following constraints,
        - the process is the owner of the directory.
        - the effective group ID or one of the supplementary group ID's of the
        process is not equal to the group ID of the directory.

fchmod06  

        Verify that,
        1) fchmod(2) returns -1 and sets errno to EPERM if the effective user id
        of process does not match the owner of the file and the process is
        not super user.
        2) fchmod(2) returns -1 and sets errno to EBADF if the file descriptor
        of the specified file is not valid.

fchmod07  

        Verify that, fchmod(2) succeeds when used to change the mode permissions
        of a file specified by file descriptor. 


fchown01

        Basic test for fchown(2).

fchown02  

        Verify that, when fchown(2) invoked by super-user to change the owner and
        group of a file specified by file descriptor to any numeric 
        owner(uid)/group(gid) values,
        - clears setuid and setgid bits set on an executable file.
        - preserves setgid bit set on a non-group-executable file.

fchown03  

        Verify that, fchown(2) succeeds to change the group of a file specified
        by path when called by non-root user with the following constraints,
        - euid of the process is equal to the owner of the file.         
        - the intended gid is either egid, or one of the supplementary gids
        of the process.
        Also, verify that fchown() clears the setuid/setgid bits set on the file.

fchown04  

        Verify that,
        1) fchown(2) returns -1 and sets errno to EPERM if the effective user id
        of process does not match the owner of the file and the process is
        not super user.
        2) fchown(2) returns -1 and sets errno to EBADF if the file descriptor
        of the specified file is not valid.

fchown05  

        Verify that, fchown(2) succeeds to change the owner and group of a file
        specified by file descriptor to any numeric owner(uid)/group(gid) values 
        when invoked by super-user.

lchown01  

        Verify that, lchown(2) succeeds to change the owner and group of a file
        specified by path to any numeric owner(uid)/group(gid) values when invoked 
        by super-user.


lchown02  

        Verify that,
        1) lchown(2) returns -1 and sets errno to EPERM if the effective user id
        of process does not match the owner of the file and the process is
        not super user.
        2) lchown(2) returns -1 and sets errno to EACCES if search permission is
        denied on a component of the path prefix.
        3) lchown(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        4) lchown(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
        component is too long.
        5) lchown(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname is not a directory.
        6) lchown(2) returns -1 and sets errno to ENOENT if the specified file
        does not exists.


creat01  

        Testcase to check the basic functionality of the creat(2) system call.

creat03  

        Testcase to check whether the sticky bit cleared.

creat04  

        Testcase to check creat(2) fails with EACCES

creat05  

        Testcase to check that creat(2) system call returns EMFILE.

creat06  

        Testcase to check creat(2) sets the following errnos correctly:
        1.      EISDIR
        2.      ENAMETOOLONG
        3.      ENOENT
        4.      ENOTDIR
        5.      EFAULT
        6.      EACCES

creat07  

        Testcase to check creat(2) sets the following errnos correctly:
        1.      ETXTBSY

creat09

        Basic test for creat(2) using 0700 argument.

truncate01  

        Verify that, truncate(2) succeeds to truncate a file to a specified
        length.


truncate02  

        Verify that, truncate(2) succeeds to truncate a file to a certain length,
        but the attempt to read past the truncated length will fail.  


truncate03  

        Verify that,
        1) truncate(2) returns -1 and sets errno to EACCES if search/write
        permission denied for the process on the component of the path prefix
                or named file.
        2) truncate(2) returns -1 and sets errno to ENOTDIR if the component of
        the path prefix is not a directory.
        3) truncate(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        4) truncate(2) returns -1 and sets errno to ENAMETOOLONG if the component
        of a pathname exceeded 255 characters or entire pathname exceeds 1023
        characters.
        5) truncate(2) returns -1 and sets errno to ENOENT if the named file
        does not exist.

ftruncate01  

        Verify that, ftruncate(2) succeeds to truncate a file to a specified
        length if the file indicated by file descriptor opened for writing.

ftruncate02  

        Verify that, ftruncate(2) succeeds to truncate a file to a certain length,
        but the attempt to read past the truncated length will fail.  

ftruncate03  

        Verify that,
        1) ftruncate(2) returns -1 and sets errno to EINVAL if the specified
        truncate length is less than 0.
        2) ftruncate(2) returns -1 and sets errno to EBADF if the file descriptor
        of the specified file is not valid.

vhangup01  

        Check the return value, and errno of vhangup(2)
        when a non-root user calls vhangup().

vhangup02  

        To test the basic functionality of vhangup(2)
growfiles

        This program will grow a list of files.
        Each file will grow by grow_incr before the same
        file grows twice.  Each file is open and closed before next file is opened.

pipe01  

        Testcase to check the basic functionality of the pipe(2) syscall:
        Check that both ends of the pipe (both file descriptors) are
        available to a process opening the pipe.

pipe05  

        Check what happens when pipe is passed a bad file descriptor.

pipe06  

        Check what happens when the system runs out of pipes.

pipe08  

        Check that a SIGPIPE signal is generated when a write is
        attempted on an empty pipe.

pipe09  

        Check that two processes can use the same pipe at the same time.

pipe10  

        Check that parent can open a pipe and have a child read from it

pipe11  

        Check if many children can read what is written to a pipe by the
        parent.

pipeio

        This tool can be used to beat on system or named pipes.
        See the help() function below for user information.

        /ipc_stress/message_queue_test_01.c
        /ipc_stress/pipe_test_01.c
        /ipc_stress/semaphore_test_01.c
        /ipc_stress/single_test_01.c

proc01
        Recursively reads all files within /proc filesystem.

lftest
        The purpose of this test is to verify the file size limitations of a filesystem.
        It writes one buffer at a time and lseeks from the beginning of the file to the
        end of the last write position.  The intent is to test lseek64.


llseek01  

        Verify that, llseek() call succeeds to set the file pointer position 
        to an offset larger than file size. Also, verify that any attempt
        to write to this location fails.

llseek02  

        Verify that,
        1. llseek() returns -1 and sets errno to EINVAL, if the 'Whence' argument
        is not a proper value.
        2. llseek() returns -1 and sets errno to EBADF, if the file handle of
        the specified file is not valid.

lseek01

        Basic test for lseek(2) 

lseek02

        Negative test for lseek(2) 

lseek03

        Negative test for lseek(2) whence

lseek04

        Negative test for lseek(2) of a fifo 

lseek05

        Negative test for lseek(2) of a pipe

lseek06  

        Verify that, lseek() call succeeds to set the file pointer position 
        to less  than  or equal to the file size, when a file is opened for
        read or write.

lseek07  

        Verify that, lseek() call succeeds to set the file pointer position
        to more than the file size, when a file is opened for reading/writing.

lseek08  

        Verify that, lseek() call succeeds to set the file pointer position 
        to the end of the file when 'whence' value set to SEEK_END and any
        attempts to read from that position should fail.

lseek09  

        Verify that, lseek() call succeeds to set the file pointer position 
        to the current specified location, when 'whence' value is set to
        SEEK_CUR and the data read from the specified location should match
        the expected data.

lseek10  

        Verify that,
        1. lseek() returns -1 and sets errno to ESPIPE, if the file handle of
        the specified file is associated with a pipe, socket, or  FIFO. 
        2. lseek() returns -1 and sets errno to EINVAL, if the 'Whence' argument
        is not a proper value.
        3. lseek() returns -1 and sets errno to EBADF, if the file handle of
        the specified file is not valid.

rwtest

        A wrapper for doio and iogen.

doio 
        a general purpose io initiator with system call and
        write logging.  See doio.h for the structure which defines
        what doio requests should look like.

        Currently doio can handle read,write,reada,writea,ssread,
        sswrite, and many varieties of listio requests.
        For disk io, if the O_SSD flag is set doio will allocate
        the appropriate amount of ssd and do the transfer - thus, doio
        can handle all of the primitive types of file io.

iogen 
        A tool for generating file/sds io for a doio process

pread01  

        Verify the functionality of pread() by writing known data using pwrite()
        to the file at various specified offsets and later read from the file from
        various specified offsets, comparing the data read against the data 
        written.

pread02  

        Verify that,
        1) pread() fails when attempted to read from an unnamed pipe.
        2) pread() fails if the specified offset position was invalid.


pwrite01  

        Verify the functionality of pwrite() by writing known data using pwrite()
        to the file at various specified offsets and later read from the file from
        various specified offsets, comparing the data written against the data
        read using read().

pwrite02  

        Verify that,
        1) pwrite() fails when attempted to write to an unnamed pipe.
        2) pwrite() fails if the specified offset position was invalid.


read01

        Basic test for the read(2) system call

read02  

        test 1: Does read return -1 if file descriptor is not valid, check for EBADF

        test 2: Check if read sets EISDIR, if the fd refers to a directory

        test 3: Check if read sets EFAULT, if buf is -1.

read03  

        Testcase to check that read() sets errno to EAGAIN

read04  

        Testcase to check if read returns the number of bytes read correctly.


readv01  

        Testcase to check the basic functionality of the readv(2) system call.

readv02  

        Testcase to check the error conditions of the readv(2) system call.

write01

        Basic test for write(2) system call.

write02  

        Basic functionality test: does the return from write match the count
        of the number of bytes written.


write03  

        Testcase to check that write(2) doesn't corrupt a file when it fails

write04  

        Testcase to check that write() sets errno to EAGAIN

write05  

        Check the return value, and errnos of write(2)
        - when the file descriptor is invalid - EBADF
        - when the buf parameter is invalid - EFAULT
        - on an attempt to write to a pipe that is not open for reading - EPIPE


writev01  

        Testcase to check the basic functionality of writev(2) system call.


writev02  

        In these testcases, writev() is called with partially valid data 
        to be written in a sparse file.


writev03  

        The testcases are written calling writev() with partially valid data
        to overwrite the contents, to write in the beginning and to write in
        the end of the file.

writev04  

        The testcases are written calling writev() with partially valid data
        to overwrite the contents, to write in the beginning and to write in
        the end of the file. This is same as writev03, but the length of
        buffer used here is 8192 bytes.

writev05  

        These testcases are written to test writev() on sparse files. This
        is same as writev02. But the initial write() with valid data is
        done at the beginning of the file.

disktest

        Does repeated accesses to a filespec and optionally writes to, reads from,
        and  verifies  the  data.  By default, disktest makes assumptions about
        the running environment which allows for a quick start of IO generation.
        However, Disktest has  a  large  number  of command line options which can
        be used to adapt the test for a variety of uses including data integrity,
        medium integrity, performance, and  simple application simulation.




getdents01
        get a directory entry

getdents02
        check that we get a failure with a bad file descriptor


getdents03
        check for an EINVAL error


getdents04
        check for an ENOTDIR error

getdents05
        check that we get a failure with a bad dirp address.
process_stress
        Spawn creates a tree
        of processes with Dval depth and Bval breadth.  Each parent will spawn
        Bval children.  Each child will store information about themselves
        in shared memory.  The leaf nodes will communicate the existence
        of one another through message queues, once each leaf node has
        received communication from all of her siblings she will reduce
        the semaphore count and exit.  Meanwhile all parents are waiting
        to hear from their children through the use of semaphores.  When
        the semaphore count reaches zero then the parent knows all the
        children have talked to one another.  Locking of the connter semaphore
        is provided by the use of another (binary) semaphore.




sched_stress
        Exports required environment variables and runs sched_driver
sched_driver
        This program uses system calls to change the 
        priorities of the throughput measurement testcases.  
        When real-time is in effect, priorities 50 through 64
        are used.  (MAX_PRI and MIN_PRI)  When user-time     
        (normal) is in effect, 0-14 (corresponding to nice()  
        calls) is used.  The driver only keeps track of      
        values from 50 to 64, and the testcases will scale   
        them down to 0 to 14 when needed, to change the      
        priority of a user-time process.                       

time-schedule
        This programme will determine the context switch 
        (scheduling) overhead on a system. It takes into 
        account SMP machines. True context switches are 
        measured.
trace_sched
        This utility spawns N tasks, each task sets its priority 
        by making a system call to the scheduler. The thread 
        function reads the priority that the scheduler sets for 
        this task and also reads from /proc the processor this 
        task last executed on the information that is gathered 
        by the thread function may be in real-time. Its only an 
        approximation.         

sched_getscheduler01  

        Testcase to check sched_getscheduler() returns correct return value 

sched_getscheduler02  

        To check for the errno ESRCH


sched_setscheduler01  

        Testcase to test whether sched_setscheduler(2) sets the errnos
        correctly.

sched_setscheduler02  

        Testcase to test whether sched_setscheduler(2) sets the errnos
        correctly.


sched_yield01  

        Testcase to check that sched_yield returns correct values.


nice01  

        Verify that root can provide a negative value  to nice()
        and hence root can decrease the nice value of the process
        using nice() system call

nice02  

        Verify that any user can successfully increase the nice value of
        the process by passing a higher increment value (> max. applicable limits)
        to nice() system call.

nice03  

        Verify that any user can successfully increase the nice value of
        the process by passing an increment value (< max. applicable limits) to 
        nice() system call.

nice04  

        Verify that, nice(2) fails when, a non-root user attempts to increase
        the priority of a process by specifying a negative increment value.

nice05

        Basic test for nice(2) 


poll01  

        Verify that valid open file descriptor must be provided to poll() to
        succeed.

select01

        Basic test for the select(2) system call to a fd of regular file with no I/O 
        and small timeout 

select02

        Basic test for the select(2) system call to fd of system pipe with no I/O 
        and small timeout 

select03

        Basic test for the select(2) system call to fd of a named-pipe (FIFO) 

select04  

        Verify that select(2) returns immediately (does not block) if the
        timeout value is zero.

select05  

        Verify that select(2) fails when one or more of the file descriptor sets
        specify a file descriptor which is not valid.

select06  

        Verify that select(2) fails when a signal is delivered before any of the
        selected events occur and before the timeout interval expires.

select07  

        Verify that select(2) fails when an invalid timeout interval is specified.

select08  

        Verify the functionality of select(2) by passing non-null writefds
        which points to a regular file, pipes or FIFO's.

select09  

        Verify the functionality of select(2) by passing non-null readfds
        which points to a regular file, pipes or FIFO's.

select10 

        Verify that a successful call to select() shall return the desired 
        number of modified descriptors for which bits are set in the bit masks, 
        where descriptors points to a regular file, pipes or FIFO's.
sem01

        Creates a semaphore and two processes.  The processes
        each go through a loop where they semdown, delay for a
        random amount of time, and semup, so they will almost
        always be fighting for control of the semaphore.

sem02
        The application creates several threads using pthread_create().
        One thread performs a semop() with the SEM_UNDO flag set. The
        change in semaphore value performed by that semop should be
        "undone" only when the last pthread exits.


semctl01  

        test the 10 possible semctl() commands

semctl02  

        test for EACCES error

semctl03  

        test for EINVAL and EFAULT errors

semctl04 

        test for EPERM error


semctl05

        test for ERANGE error

semget01

        test that semget() correctly creates a semaphore set

semget02 

        test for EACCES and EEXIST errors

semget03 

        test for ENOENT error

semget05 

        test for ENOSPC error

semget06

        test for EINVAL error

semop01 

        test that semop() basic functionality is correct

semop02

        test for E2BIG, EACCES, EFAULT and EINVAL errors

semop03

        test for EFBIG error

semop04

        test for EAGAIN error

semop05

        test for EINTR and EIDRM errors


shmat01
        test that shmat() works correctly

shmat02
        check for EINVAL and EACCES errors


shmat03
        test for EACCES error


shmctl01
        test the IPC_STAT, IPC_SET and IPC_RMID commands as
        they are used with shmctl()


shmctl02
        check for EACCES, EFAULT and EINVAL errors


shmctl03
        check for EACCES, and EPERM errors


shmdt01
        check that shared memory is detached correctly


shmdt02
        check for EINVAL error


shmget01
        test that shmget() correctly creates a shared memory segment


shmget02
        check for ENOENT, EEXIST and EINVAL errors


shmget03
        test for ENOSPC error


shmget04
        test for EACCES error


shmget05
        test for EACCES error
shmat1

        Test the LINUX memory manager. The program is aimed at
        stressing the memory manager by repeated shmat/write/read/
        shmatd of file/memory of random size (maximum 1000 * 4096)
        done by multiple processes.

shm_test

        This program is designed to stress the Memory management sub -
        system of Linux. This program will spawn multiple pairs of
        reader and writer threads. One thread will create the shared
        segment of random size and write to this memory, the other
        pair will read from this memory.

sigaction01  

        Test some features of sigaction (see below for more details)


sigaction02  

        Testcase to check the basic errnos set by the sigaction(2) syscall.


sigaltstack01  

        Send a signal using the main stack. While executing the signal handler
        compare a variable's address lying on the main stack with the stack
        boundaries returned by sigaltstack().


sigaltstack02  

        Verify that,
        1. sigaltstack() fails and sets errno to EINVAL when "ss_flags" field
        pointed to by 'ss' contains invalid flags.
        2. sigaltstack() fails and sets errno to ENOMEM when the size of alternate
        stack area is less than MINSIGSTKSZ.

sighold02

        Basic test for the sighold02(2) system call. 


signal01
        set the signal handler to our own function


signal02 
        Test that we get an error using illegal signals

signal03

        Boundary value and other invalid value checking of signal setup and signal 
        sending. 


signal04 
        restore signals to default behavior


signal05 
        set signals to be ignored


sigprocmask01  

        Verify that sigprocmask() succeeds to examine and change the calling
        process's signal mask. 
        Also, verify that sigpending() succeeds to store signal mask that are
        blocked from delivery and pending for the calling process.

sigrelse01

        Basic test for the sigrelse(2) system call. 

sigsuspend01  

        Verify that sigsuspend() succeeds to change process's current signal
        mask with the specified signal mask and suspends the process execution
        until the delivery of a signal.
kill01  

        Test case to check the basic functionality of kill().

kill02

        Sending a signal to processes with the same process group ID

kill03  

        Test case to check that kill fails when given an invalid signal.

kill04  

        Test case to check that kill() fails when passed a non-existent pid.

kill05  

        Test case to check that kill() fails when passed a pid owned by another
        user.

kill06  

        Test case to check the basic functionality of kill() when killing an
        entire process group with a negative pid.

kill07  

        Test case to check that SIGKILL can not be caught.

kill08  

        Test case to check the basic functionality of kill() when kill an
        entire process group.

kill09
        Basic test for kill(2)

kill10
        Signal flooding test.


mtest01
        mallocs memory <chunksize> at a time until malloc fails.
mallocstress

        This program is designed to stress the VMM by doing repeated  */
        mallocs and frees, with out using the swap space. This is     */
        achieved by spawning N threads with repeatedly malloc and free*/
        a memory of size M. The stress can be increased by increasing */
        the number of repetitions over the default number using the   */
        -l [num] option.

clisrv

        Sender: Read contents of data file. Write each line to socket, then
        read line back from socket and write to standard output.      
        Receiver: Read a stream socket one line at a time and write each line
        back to the sender.                                       
        Usage:       pthcli [port number]                 
                            

socket01  

        Verify that socket() returns the proper errno for various failure cases


socketpair01  

        Verify that socketpair() returns the proper errno for various failure cases


sockioctl01  

        Verify that ioctl() on sockets returns the proper errno for various
        failure cases

connect01  

        Verify that connect() returns the proper errno for various failure cases

getpeername01

        Verify that getpeername() returns the proper errno for various failure cases


getsockname01      

        Verify that getsockname() returns the proper errno for various failure cases

getsockopt01       

        Verify that getsockopt() returns the proper errno for various failure cases

listen01

        Verify that listen() returns the proper errno for various failure cases

accept01

        Verify that accept() returns the proper errno for various failure cases

bind01

        Verify that bind() returns the proper errno for various failure cases


recv01  

        Verify that recv() returns the proper errno for various failure cases


recvfrom01  

        Verify that recvfrom() returns the proper errno for various failure cases


recvmsg01  

        Verify that recvmsg() returns the proper errno for various failure cases

send01

        Verify that send() returns the proper errno for various failure cases

sendmsg01

        Verify that sendmsg() returns the proper errno for various failure cases
sendto01

        Verify that sendto() returns the proper errno for various failure cases

setsockopt01  

        Verify that setsockopt() returns the proper errno for various failure cases


fstat01

        Basic test for fstat(2)

fstat02  

        Verify that, fstat(2) succeeds to get the status of a file and fills
        the stat structure elements though file pointed to by file descriptor
        not opened for reading.

fstat03  

        Verify that, fstat(2) returns -1 and sets errno to EBADF if the file 
        pointed to by file descriptor is not valid.

fstat04

        Verify that, fstat(2) succeeds to get the status of a file pointed by
        file descriptor and fills the stat structure elements.


fstatfs01

        Basic test for fstatfs(2)

fstatfs02  

        Testcase to check fstatfs() sets errno correctly.

lstat01  

        Verify that, lstat(2) succeeds to get the status of a file pointed to by
        symlink and fills the stat structure elements.

lstat02

        Basic test for lstat(2) 

lstat03  

        Verify that,
        1) lstat(2) returns -1 and sets errno to EACCES if search permission is
        denied on a component of the path prefix.
        2) lstat(2) returns -1 and sets errno to ENOENT if the specified file
        does not exists or empty string.
        3) lstat(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        4) lstat(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
        component is too long.
        5) lstat(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname is not a directory.

stat01  

        Verify that, stat(2) succeeds to get the status of a file and fills the
        stat structure elements.

stat02  

        Verify that, stat(2) succeeds to get the status of a file and fills the
        stat structure elements though process doesn't have read access to the
        file.


stat03  

        Verify that,
        1) stat(2) returns -1 and sets errno to EACCES if search permission is
        denied on a component of the path prefix.
        2) stat(2) returns -1 and sets errno to ENOENT if the specified file
        does not exists or empty string.
        3) stat(2) returns -1 and sets errno to EFAULT if pathname points
        outside user's accessible address space.
        4) stat(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
        component is too long.
        5) stat(2) returns -1 and sets errno to ENOTDIR if the directory
        component in pathname is not a directory.

stat05

        Basic test for the stat05(2) system call. 

statfs01

        Basic test for the statfs(2) system call. 

statfs02  

        Testcase to check that statfs(2) sets errno correctly.


read01

        Basic test for the read(2) system call

read02  

        test 1: Does read return -1 if file descriptor is not valid, check for EBADF

        test 2: Check if read sets EISDIR, if the fd refers to a directory

        test 3: Check if read sets EFAULT, if buf is -1.

read03  

        Testcase to check that read() sets errno to EAGAIN

read04  

        Testcase to check if read returns the number of bytes read correctly.

umask01

        Basic test for the umask(2) system call. 

umask02  

        Check that umask changes the mask, and that the previous
        value of the mask is returned correctly for each value.

umask03  

        Check that umask changes the mask, and that the previous
        value of the mask is returned correctly for each value.



getgroups01

        Getgroups system call critical test 

getgroups02

        Basic test for getgroups(2) 

getgroups03  

        Verify that, getgroups() system call gets the supplementary group IDs
        of the calling process.

getgroups04  

        Verify that,
        getgroups() fails with -1 and sets errno to EINVAL if the size
        argument value is -ve.

gethostname01

        Basic test for gethostname(2)


getpgid01

        Testcase to check the basic functionality of getpgid().

getpgid02

        Testcase to check the basic functionality of getpgid().

getpgrp01
        Basic test for getpgrp(2)


getpriority01  

        Verify that getpriority() succeeds get the scheduling priority of 
        the current process, process group or user.


getpriority02  

        Verify that,
        1) getpriority() sets errno to ESRCH  if no process was located
        was located for 'which' and 'who' arguments.
        2) getpriority() sets errno to EINVAL if 'which' argument was
        not one of PRIO_PROCESS, PRIO_PGRP, or PRIO_USER.

getresgid01  

        Verify that getresgid() will be successful to get the real, effective
        and saved user id of the calling process.

getresgid02  

        Verify that getresgid() will be successful to get the real, effective
        and saved user ids after calling process invokes setregid() to change
        the effective/saved gids to that of specified user.

getresgid03  

        Verify that getresgid() will be successful to get the real, effective
        and saved user ids after calling process invokes setresgid() to change
        the effective gid to that of specified user.


getresuid01  

        Verify that getresuid() will be successful to get the real, effective
        and saved user id of the calling process.

getresuid02  

        Verify that getresuid() will be successful to get the real, effective
        and saved user ids after calling process invokes setreuid() to change
        the effective/saved uids to that of specified user.

getresuid03  

        Verify that getresuid() will be successful to get the real, effective
        and saved user ids after calling process invokes setresuid() to change
        the effective uid to that of specified user.


getsid01  

        call getsid() and make sure it succeeds

getsid02  

        call getsid() with an invalid PID to produce a failure


setfsgid01  

        Testcase to check the basic functionality of setfsgid(2) system
        call.

setfsuid01  

        Testcase to test the basic functionality of the setfsuid(2) system
        call.


setgid01

        Basic test for the setgid(2) system call. 

setgid02

        Testcase to ensure that the setgid() system call sets errno to EPERM


setgroups01

        Basic test for the setgroups(2) system call. 

setgroups02  

        Verify that,
        1. setgroups() fails with -1 and sets errno to EINVAL if the size
        argument value is > NGROUPS
        2. setgroups() fails with -1 and sets errno to EPERM if the
        calling process is not super-user.

setgroups03  

        Verify that, only root process can invoke setgroups() system call to
        set the supplementary group IDs of the process.


setpgid01               

        Basic test for setpgid(2) system call. 

setpgid02  

        Testcase to check that setpgid() sets errno correctly.

setpgid03  

        Test to check the error and trivial conditions in setpgid system call

setpriority01  

        set the priority for the test process lower.

setpriority02  

        test for an expected failure by trying to raise
        the priority for the test process while not having
        permissions to do so.

setpriority03  

        test for an expected failure by using an invalid
        PRIO value
        setpriority04  

setpriority04
        test for an expected failure by using an invalid
        process id


setpriority05 
        test for an expected failure by trying to change
        a process with an ID that is different from the
        test process

setregid01       

        Basic test for the setregid(2) system call. 

setregid02  

        Test that setregid() fails and sets the proper errno values when a
        non-root user attempts to change the real or effective group id to a 
        value other than the current gid or the current effective gid. 

setregid03  

        Test setregid() when executed by a non-root user.

setregid04  

        Test setregid() when executed by root.

setresuid01  

        Test setresuid() when executed by root.

setresuid02  

        Test that a non-root user can change the real, effective and saved
        uid values through the setresuid system call.


setresuid03  

        Test that the setresuid system call sets the proper errno
        values when a non-root user attempts to change the real, effective or
        saved uid to a value other than one of the current uid, the current
        effective uid of the current saved uid.  Also verify that setresuid
        fails if an invalid uid value is given.

setreuid01              

        Basic test for the setreuid(2) system call. 

setreuid02  

        Test setreuid() when executed by root.

setreuid03  

        Test setreuid() when executed by an unprivileged user.


setreuid04  

        Test that root can change the real and effective uid to an
        unprivileged user.

setreuid05  

        Test the setreuid() feature, verifying the role of the saved-set-uid
        and setreuid's effect on it.

setreuid06  

        Test that EINVAL is set when setreuid is given an invalid user id.

setrlimit01  

        Testcase to check the basic functionality of the setrlimit system call.


setrlimit02  

        Testcase to test the different errnos set by setrlimit(2) system call.

setrlimit03  

        Test for EPERM when the super-user tries to increase RLIMIT_NOFILE
        beyond the system limit.

setsid01  

        Test to check the error and trivial conditions in setsid system call

setuid01

        Basic test for the setuid(2) system call. 

setuid02

        Basic test for the setuid(2) system call as root. 

setuid03  

        Test to check the error and trivial conditions in setuid

fs_perms

        Regression test for Linux filesystem permissions.
uname01

        Basic test for the uname(2) system call.  

uname02  

        Call uname() with an invalid address to produce a failure

uname03  

        Call uname() and make sure it succeeds
sysctl01  

        Testcase for testing the basic functionality of sysctl(2) system call.
        This testcase attempts to read the kernel parameters using
        sysctl({CTL_KERN, KERN_ }, ...) and compares it with the known
        values.

sysctl03  

        Testcase to check that sysctl(2) sets errno to EPERM correctly.


sysctl04  

        Testcase to check that sysctl(2) sets errno to ENOTDIR


sysctl05  

        Testcase to check that sysctl(2) sets errno to EFAULT

time01

        Basic test for the time(2) system call. 


time02  

        Verify that time(2) returns the value of time in seconds since
        the Epoch and stores this value in the memory pointed to by the parameter.

times01

        Basic test for the times(2) system call. 

times02  

        Testcase to test that times() sets errno correctly

times03  

        Testcase to check the basic functionality of the times() system call.

utime01  

        Verify that the system call utime() successfully sets the modification
        and access times of a file to the current time, if the times argument
        is null, and the user ID of the process is "root".

utime02  

        Verify that the system call utime() successfully sets the modification
        and access times of a file to the current time, under the following
        constraints,
        - The times argument is null.
        - The user ID of the process is not "root".
        - The file is owned by the user ID of the process.

utime03  

        Verify that the system call utime() successfully sets the modification
        and access times of a file to the current time, under the following
        constraints,
        - The times argument is null.
        - The user ID of the process is not "root".
        - The file is not owned by the user ID of the process.
        - The user ID of the process has write access to the file.


utime04  

        Verify that the system call utime() successfully sets the modification
        and access times of a file to the time specified by times argument, if
        the times argument is not null, and the user ID of the process is "root".


utime05  

        Verify that the system call utime() successfully sets the modification
        and access times of a file to the value specified by the times argument
        under the following constraints,
        - The times argument is not null,
        - The user ID of the process is not "root".
        - The file is owned by the user ID of the process.


utime06  

        1. Verify that the system call utime() fails to set the modification
        and access times of a file to the current time, under the following
        constraints,
        - The times argument is null.
        - The user ID of the process is not "root".
        - The file is not owned by the user ID of the process.
        - The user ID of the process does not have write access to the
        file.
        2. Verify that the system call utime() fails to set the modification
        and access times of a file if the specified file doesn't exist.

settimeofday01  

        Testcase to check the basic functionality of settimeofday().


settimeofday02  

        Testcase to check that settimeofday() sets errnos correctly.

stime01  

        Verify that the system call stime() successfully sets the system's idea
        of data and time if invoked by "root" user.

stime02  

        Verify that the system call stime() fails to set the system's idea
        of data and time if invoked by "non-root" user.

gettimeofday01     

        Testcase to check that gettimeofday(2) sets errno to EFAULT.



alarm01         

        Basic test for alarm(2). 

alarm02

        Boundary Value Test for alarm(2).

alarm03

        Alarm(2) cleared by a fork.

alarm04  

        Check that when an alarm request is made, the signal SIGALRM is received
        even after the process has done an exec().

alarm05  

        Check the functionality of the Alarm system call when the time input
        parameter is non zero.

alarm06  

        Check the functionality of the Alarm system call when the time input
        parameter is zero.

alarm07  

        Check the functionality of the alarm() when the time input
        parameter is non-zero and the process does a fork.

getegid01

        Basic test for getegid(2) 


geteuid01

        Basic test for geteuid(2) 


getgid01

        Basic test for getgid(2) 

getgid02  

        Testcase to check the basic functionality of getgid().

getgid03  

        Testcase to check the basic functionality of getegid().


getpid01

        Basic test for getpid(2) 


getpid02  

        Verify that getpid() system call gets the process ID of the of the
        calling process.


getppid01  

        Testcase to check the basic functionality of the getppid() syscall.


getuid01

        Basic test for getuid(2)

getuid02  

        Testcase to check the basic functionality of the geteuid() system call.

getuid03  

        Testcase to check the basic functionality of the getuid() system call.

nanosleep01  

        Verify that nanosleep() will be successful to suspend the execution
        of a process for a specified time.

nanosleep02  

        Verify that nanosleep() will be successful to suspend the execution
        of a process, returns after the receipt of a signal and writes the
        remaining sleep time into the structure.

nanosleep03  

        Verify that nanosleep() will fail to suspend the execution
        of a process for a specified time if interrupted by a non-blocked signal.

nanosleep04  

        Verify that nanosleep() will fail to suspend the execution
        of a process if the specified pause time is invalid.