arch/arm/mach-omap2/clkt34xx_dpll3m2.c

   1 /*
   2  * OMAP34xx M2 divider clock code
   3  *
   4  * Copyright (C) 2007-2008 Texas Instruments, Inc.
   5  * Copyright (C) 2007-2010 Nokia Corporation
   6  *
   7  * Paul Walmsley
   8  * Jouni Högander
   9  *
  10  * Parts of this code are based on code written by
  11  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License version 2 as
  15  * published by the Free Software Foundation.
  16  */
  17 #undef DEBUG
  18
  19 #include <linux/kernel.h>
  20 #include <linux/errno.h>
  21 #include <linux/clk.h>
  22 #include <linux/io.h>
  23
  24 #include <plat/clock.h>
  25 #include <plat/sram.h>
  26 #include <plat/sdrc.h>
  27
  28 #include "clock.h"
  29 #include "clock3xxx.h"
  30 #include "clock34xx.h"
  31 #include "sdrc.h"
  32
  33 #define CYCLES_PER_MHZ                  1000000
  34
  35 /*
  36  * CORE DPLL (DPLL3) M2 divider rate programming functions
  37  *
  38  * These call into SRAM code to do the actual CM writes, since the SDRAM
  39  * is clocked from DPLL3.
  40  */
  41
  42 /**
  43  * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
  44  * @clk: struct clk * of DPLL to set
  45  * @rate: rounded target rate
  46  *
  47  * Program the DPLL M2 divider with the rounded target rate.  Returns
  48  * -EINVAL upon error, or 0 upon success.
  49  */
  50 int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
  51 {
  52         u32 new_div = 0;
  53         u32 unlock_dll = 0;
  54         u32 c;
  55         unsigned long validrate, sdrcrate, _mpurate;
  56         struct omap_sdrc_params *sdrc_cs0;
  57         struct omap_sdrc_params *sdrc_cs1;
  58         int ret;
  59
  60         if (!clk || !rate)
  61                 return -EINVAL;
  62
  63         validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
  64         if (validrate != rate)
  65                 return -EINVAL;
  66
  67         sdrcrate = sdrc_ick_p->rate;
  68         if (rate > clk->rate)
  69                 sdrcrate <<= ((rate / clk->rate) >> 1);
  70         else
  71                 sdrcrate >>= ((clk->rate / rate) >> 1);
  72
  73         ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
  74         if (ret)
  75                 return -EINVAL;
  76
  77         if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
  78                 pr_debug("clock: will unlock SDRC DLL\n");
  79                 unlock_dll = 1;
  80         }
  81
  82         /*
  83          * XXX This only needs to be done when the CPU frequency changes
  84          */
  85         _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
  86         c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
  87         c += 1;  /* for safety */
  88         c *= SDRC_MPURATE_LOOPS;
  89         c >>= SDRC_MPURATE_SCALE;
  90         if (c == 0)
  91                 c = 1;
  92
  93         pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
  94                  validrate);
  95         pr_debug("clock: SDRC CS0 timing params used:"
  96                  " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
  97                  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
  98                  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
  99         if (sdrc_cs1)
 100                 pr_debug("clock: SDRC CS1 timing params used: "
 101                  " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
 102                  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
 103                  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 104
 105         if (sdrc_cs1)
 106                 omap3_configure_core_dpll(
 107                                   new_div, unlock_dll, c, rate > clk->rate,
 108                                   sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 109                                   sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 110                                   sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
 111                                   sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 112         else
 113                 omap3_configure_core_dpll(
 114                                   new_div, unlock_dll, c, rate > clk->rate,
 115                                   sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 116                                   sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 117                                   0, 0, 0, 0);
 118         clk->rate = rate;
 119
 120         return 0;
 121 }
 122