src/mainboard/dell/snb_ivb_workstations/Kconfig

   1 ## SPDX-License-Identifier: GPL-2.0-only
   2
   3 config BOARD_DELL_SNB_IVB_WORKSTATIONS
   4         def_bool n
   5         select BOARD_ROMSIZE_KB_12288
   6         select HAVE_ACPI_RESUME
   7         select HAVE_ACPI_TABLES
   8         select INTEL_INT15
   9         select NORTHBRIDGE_INTEL_SANDYBRIDGE
  10         select SERIRQ_CONTINUOUS_MODE
  11         select USE_NATIVE_RAMINIT
  12         select MEMORY_MAPPED_TPM
  13         select MAINBOARD_HAS_TPM1
  14         select MAINBOARD_USES_IFD_GBE_REGION
  15         select SUPERIO_SMSC_SCH5545
  16         select MAINBOARD_HAS_LIBGFXINIT
  17         select INTEL_GMA_HAVE_VBT
  18         select HAVE_OPTION_TABLE
  19         select HAVE_CMOS_DEFAULT
  20         select PCIEXP_L1_SUB_STATE
  21         select DRIVERS_UART_8250IO
  22
  23 config BOARD_DELL_OPTIPLEX_9010
  24         select BOARD_DELL_SNB_IVB_WORKSTATIONS
  25         select SOUTHBRIDGE_INTEL_C216
  26
  27 config BOARD_DELL_PRECISION_T1650
  28         select BOARD_DELL_SNB_IVB_WORKSTATIONS
  29         select SOUTHBRIDGE_INTEL_C216
  30
  31 if BOARD_DELL_SNB_IVB_WORKSTATIONS
  32
  33 config MAINBOARD_DIR
  34         default "dell/snb_ivb_workstations"
  35
  36 config MAINBOARD_PART_NUMBER
  37         default "OptiPlex 9010" if BOARD_DELL_OPTIPLEX_9010
  38         default "Precision T1650" if BOARD_DELL_PRECISION_T1650
  39
  40 config VARIANT_DIR
  41         default "optiplex_9010_sff" if BOARD_DELL_OPTIPLEX_9010
  42         default "precision_t1650" if BOARD_DELL_PRECISION_T1650
  43
  44 config DEVICETREE
  45         default "variants/baseboard/devicetree.cb"
  46
  47 config OVERRIDE_DEVICETREE
  48         default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
  49
  50 config DRAM_RESET_GATE_GPIO
  51         int
  52         default 60
  53
  54 config USBDEBUG_HCD_INDEX
  55         int
  56         default 2
  57
  58 config CBFS_SIZE
  59         default 0x600000
  60
  61 config INCLUDE_SMSC_SCH5545_EC_FW
  62         bool "Include SMSC SCH5545 EC firmware binary"
  63         default n
  64         help
  65           This option allows to add the SMSC SCH5545 Environmental Controller
  66           firmware binary. The firmware must be loaded after each power failure
  67           in order to properly initialize the fan control, because EC loses its
  68           configuration when power is cut off. Otherwise the fans will keep
  69           running at full speed after power failure.
  70
  71 config SMSC_SCH5545_EC_FW_FILE
  72         string "File path to the SMSC SCH5545 EC firmware binary"
  73         depends on INCLUDE_SMSC_SCH5545_EC_FW
  74
  75 endif