mb/google/brya/var/uldrenite: update gpio settings
[coreboot2.git] / src / drivers / i2c / ptn3460 / ptn3460.h
blobac342abefceedf4430be64d341ae9b0fc97c9f21
1 /* SPDX-License-Identifier: GPL-2.0-only */
3 #ifndef _I2C_PTN3460_H_
4 #define _I2C_PTN3460_H_
6 #include <types.h>
8 #define PTN_EDID_OFF 0x00
9 #define PTN_EDID_LEN 0x80
10 #define PTN_CONFIG_OFF 0x80
11 #define PTN_CONFIG_LEN 0x19
12 #define PTN_FLASH_CFG_OFF 0xE8
13 #define PTN_FLASH_CFG_LEN 0x04
14 #define PTN_MAX_EDID_NUM 6
15 #define PTN_ENABLE_EMULATION (1 << 0)
17 /* Define some error codes that can be used */
18 #define PTN_SUCCESS 0x00000000
19 #define PTN_BUS_ERROR 0x10000000
20 #define PTN_INVALID_EDID 0x20000000
21 #define PTN_INVALID_EDID_BLOCK 0x30000000
22 #define PTN_ERROR 0x40000000
24 struct ptn_3460_config {
25 u8 dp_interface_ctrl; /* DisplayPort interface control */
26 u8 lvds_interface_ctrl1; /* LVDS interface control register 1 */
27 u8 lvds_interface_ctrl2; /* LVDS interface control register 2 */
28 u8 lvds_interface_ctrl3; /* LVDS interface control register 3 */
29 u8 edid_rom_emulation; /* select which EDID-block is emulated */
30 u8 edid_rom_access_ctrl; /* select which EDID block to map to 0..0x7F */
31 u8 pwm_min[3]; /* smallest PWM frequency for back light */
32 u8 pwm_max[3]; /* biggest PWM frequency for back light */
33 u8 fast_link_ctrl; /* Fast link training control register */
34 u8 pin_cfg_ctrl1; /* Pin configuration control register 1 */
35 u8 pin_cfg_ctrl2; /* Pin configuration control register 2 */
36 u8 pwm_default; /* Default PWM bit count in DPCD register */
37 u16 pwm_value; /* Current PWM bit count in DPCD register */
38 u8 pwm_default_freq; /* Default PWM frequency in DPCD register */
39 u8 t3_timing; /* Panel T3 timing value */
40 u8 t12_timing; /* Panel T12 timing value */
41 u8 backlight_ctrl; /* Back light control register */
42 u8 t2_delay; /* Panel T2 delay */
43 u8 t4_timing; /* Panel T4 timing value */
44 u8 t5_delay; /* Panel T5 delay */
45 } __packed;
47 struct ptn_3460_flash {
48 u8 cmd; /* Flash command (erase or erase and flash) */
49 u16 magic; /* Magic number needed by the flash algorithm */
50 u8 trigger; /* Trigger for starting flash operation */
51 } __packed;
53 /* We need functions which we can call to get mainboard specific data */
54 enum cb_err mainboard_ptn3460_get_edid(uint8_t edid_data[PTN_EDID_LEN]);
55 uint8_t mainboard_ptn3460_select_edid_table(void);
56 enum cb_err mainboard_ptn3460_config(struct ptn_3460_config *cfg_ptr);
58 #endif /* _I2C_PTN3460_H_ */