mb/amb/birman*/gpio: remove configuration for VDD_MEM_VID[0,1]

[coreboot2.git] / src / mainboard / lenovo / t400 / devicetree.cb

chip northbridge/intel/gm45
        # IGD Displays
        register "gfx" = "GMA_STATIC_DISPLAYS(1)"

        register "gpu_panel_power_up_delay" = "250"             # T1+T2: 25ms
        register "gpu_panel_power_down_delay" = "250"           # T3:    25ms
        register "gpu_panel_power_backlight_on_delay" = "2500"  # T5:   250ms
        register "gpu_panel_power_backlight_off_delay" = "2500" # Tx:   250ms
        register "gpu_panel_power_cycle_delay" = "3"            # T4:   200ms

        register "slfm" = "1"

        device cpu_cluster 0 on ops gm45_cpu_bus_ops end

        register "pci_mmio_size" = "2048"

        device domain 0 on
                ops gm45_pci_domain_ops
                device pci 00.0 on
                        subsystemid 0x17aa 0x20e0
                end # host bridge
                device pci 01.0 on end # PCIe Bridge for discrete graphics
                device pci 02.0 on # VGA
                        subsystemid 0x17aa 0x20e4
                end
                device pci 02.1 on
                        subsystemid 0x17aa 0x20e4
                end # Display
                device pci 03.0 on
                        subsystemid 0x17aa 0x20e6
                end # ME
                device pci 03.1 off end # ME
                device pci 03.2 off end # ME
                device pci 03.3 off end # ME
                chip southbridge/intel/i82801ix
                        register "pirqa_routing" = "0x0b"
                        register "pirqb_routing" = "0x0b"
                        register "pirqc_routing" = "0x0b"
                        register "pirqd_routing" = "0x0b"
                        register "pirqe_routing" = "0x80"
                        register "pirqf_routing" = "0x80"
                        register "pirqg_routing" = "0x80"
                        register "pirqh_routing" = "0x80"

                        register "gpi8_routing"  = "2"
                        register "gpe0_en" = "0x01000000"
                        register "gpi1_routing"  = "2"

                        # Set AHCI mode, enable ports 1 and 2.
                        register "sata_port_map"                = "0x03"
                        register "sata_clock_request"           = "0"
                        register "sata_traffic_monitor"         = "0"

                        # Set c-state support
                        register "c4onc3_enable"                = "1"
                        register "c5_enable"                    = "1"
                        register "c6_enable"                    = "1"

                        # Set thermal throttling to 75%.
                        register "throttle_duty"                = "THTL_75_0"

                        # Enable PCIe ports 1,2,4 as slots (Mini * PCIe).
                        register "pcie_slot_implemented"        = "0xb"
                        # Set power limits to 10 * 10^0 watts.
                        # Maybe we should set less for Mini PCIe.
                        register "pcie_power_limits" = "{ { 10, 0 }, { 10, 0 }, { 0, 0 }, { 10, 0 }, { 0, 0 }, { 0, 0 } }"
                        register "pcie_hotplug_map" = "{ 0, 0, 0, 1, 0, 0, 0, 0 }"
                        register "gen1_dec" = "0x007c1601"
                        register "gen2_dec" = "0x000c15e1"
                        register "gen3_dec" = "0x001c1681"

                        device pci 19.0 on end # LAN
                        device pci 1a.0 on # UHCI
                                subsystemid 0x17aa 0x20f0
                        end
                        device pci 1a.1 on # UHCI
                                subsystemid 0x17aa 0x20f0
                        end
                        device pci 1a.2 on # UHCI
                                subsystemid 0x17aa 0x20f0
                        end
                        device pci 1a.7 on # EHCI
                                subsystemid 0x17aa 0x20f1
                        end
                        device pci 1b.0 on # HD Audio
                                subsystemid 0x17aa 0x20f2
                        end
                        device pci 1c.0 on # PCIe Port #1
                                subsystemid 0x17aa 0x20f3 # WWAN
                        end
                        device pci 1c.1 on
                                subsystemid 0x17aa 0x20f3 # WLAN
                        end # PCIe Port #2
                        device pci 1c.2 on
                                subsystemid 0x17aa 0x20f3 # UWB
                        end # PCIe Port #3
                        device pci 1c.3 on
                                subsystemid 0x17aa 0x20f3 # Expresscard
                                smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
                        end # PCIe Port #4
                        device pci 1c.4 off end # PCIe Port #5
                        device pci 1c.5 off end # PCIe Port #6
                        device pci 1d.0 on # UHCI
                                subsystemid 0x17aa 0x20f0
                        end
                        device pci 1d.1 on # UHCI
                                subsystemid 0x17aa 0x20f0
                        end
                        device pci 1d.2 on # UHCI
                                subsystemid 0x17aa 0x20f0
                        end
                        device pci 1d.7 on # EHCI
                                subsystemid 0x17aa 0x20f1
                        end
                        device pci 1e.0 on # PCI
                                subsystemid 0x17aa 0x20f4
                        end
                        device pci 1f.0 on # LPC bridge
                                subsystemid 0x17aa 0x20f5

                                chip ec/lenovo/pmh7
                                        device pnp ff.1 on end # dummy
                                        register "backlight_enable" = "true"
                                        register "dock_event_enable" = "true"
                                end

                                chip ec/lenovo/h8
                                        device pnp ff.2 on # dummy
                                                io 0x60 = 0x62
                                                io 0x62 = 0x66
                                                io 0x64 = 0x1600
                                                io 0x66 = 0x1604
                                        end

                                        register "config0" = "0xa6"
                                        register "config1" = "0x04"
                                        register "config2" = "0xa0"
                                        register "config3" = "0x01"

                                        register "beepmask0" = "0xfe"
                                        register "beepmask1" = "0x96"
                                        register "has_power_management_beeps" = "1"
                                        register "has_uwb" = "1"

                                        register "event2_enable" = "0xff"
                                        register "event3_enable" = "0xff"
                                        register "event4_enable" = "0xf4"
                                        register "event5_enable" = "0x3c"
                                        register "event6_enable" = "0x80"
                                        register "event7_enable" = "0x01"
                                        register "event8_enable" = "0x01"
                                        register "event9_enable" = "0xff"
                                        register "eventa_enable" = "0xff"
                                        register "eventb_enable" = "0xff"
                                        register "eventc_enable" = "0xff"
                                        register "eventd_enable" = "0xff"

                                        register "has_bdc_detection" = "1"
                                        register "bdc_gpio_num" = "48"
                                        register "bdc_gpio_lvl" = "0"
                                end

                                chip superio/nsc/pc87382
                                        device pnp 164e.2 off end # IR
                                        device pnp 164e.3 off end # Serial Port
                                        device pnp 164e.7 on # GPIO
                                                io 0x60 = 0x1680
                                        end
                                        device pnp 164e.19 on # DLPC
                                                io 0x60 = 0x164c
                                        end
                                end

                                chip superio/nsc/pc87384
                                        device pnp 2e.1 on # Parallel Port
                                                io 0x60 = 0x3bc
                                                irq 0x70 = 7
                                        end
                                        device pnp 2e.2 off end # Serial Port / IR
                                        device pnp 2e.3 on # Serial Port
                                                io 0x60 = 0x3f8
                                                irq 0x70 = 4
                                        end
                                        device pnp 2e.7 on # GPIO
                                                io 0x60 = 0x1620
                                        end
                                end
                        end
                        device pci 1f.2 on # SATA/IDE 1
                                subsystemid 0x17aa 0x20f8
                        end
                        device pci 1f.3 on end  # SMBus
                        device pci 1f.5 off end # SATA/IDE 2
                        device pci 1f.6 off end # Thermal
                end
        end
end