soc/intel: Remove blank lines before '}' and after '{'

[coreboot2.git] / src / mainboard / asrock / h81m-hds / devicetree.cb

## SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/haswell
        register "gpu_ddi_e_connected" = "1"

        chip cpu/intel/haswell
                device cpu_cluster 0 on ops haswell_cpu_bus_ops end
        end

        device domain 0 on
                ops haswell_pci_domain_ops
                device pci 00.0 on # Host bridge
                        subsystemid 0x1849 0x0c00
                end

                device pci 01.0 on # PCIe graphics
                        subsystemid 0x1849 0x0c01
                end

                device pci 02.0 on # VGA controller
                        subsystemid 0x1849 0x0402
                end

                device pci 03.0 on # Mini-HD audio
                        subsystemid 0x1849 0x0c0c
                end

                chip southbridge/intel/lynxpoint
                        register "sata_port_map" = "0x33"

                        register "gen1_dec" = "0x00000295" # Super I/O HWM

                        device pci 14.0 on      # xHCI controller
                                subsystemid 0x1849 0x8c31
                        end
                        device pci 16.0 on      # Management Engine interface 1
                                subsystemid 0x1849 0x8c3a
                        end
                        device pci 16.1 off end # Management Engine interface 2
                        device pci 16.2 off end # Management Engine IDE-R
                        device pci 16.3 off end # Management Engine KT
                        device pci 19.0 off end # Intel Gigabit Ethernet
                        device pci 1a.0 on      # EHCI controller #2
                                subsystemid 0x1849 0x8c2d
                        end
                        device pci 1b.0 on      # HD audio controller
                                subsystemid 0x1849 0x7662
                        end
                        device pci 1c.0 on      # PCIe port #1
                                subsystemid 0x1849 0x8c10
                        end
                        device pci 1c.1 off end # PCIe port #2
                        device pci 1c.2 off end # PCIe port #3
                        device pci 1c.3 on      # Realtek Gigabit Ethernet
                                subsystemid 0x1849 0x8c16
                                chip drivers/net
                                        register "customized_leds" = "0x0824"
                                        device pci 00.0 on
                                                subsystemid 0x1849 0x8168
                                        end
                                end
                        end
                        device pci 1c.4 on      # ASMedia USB controller
                                subsystemid 0x1849 0x8c18
                                device pci 00.0 on
                                        subsystemid 0x1849 0x1042
                                end
                        end
                        device pci 1c.5 on      # PCIe 1x slot
                                subsystemid 0x1849 0x8c1a
                        end
                        device pci 1d.0 on      # EHCI controller #1
                                subsystemid 0x1849 0x8c26
                        end
                        device pci 1f.0 on      # LPC bridge
                                subsystemid 0x1849 0x8c5c

                                chip superio/nuvoton/nct6776
                                        device pnp 2e.0   off end # Floppy
                                        device pnp 2e.1   on      # Parallel
                                                io  0x60 = 0x0378
                                                irq 0x70 = 7
                                                drq 0x74 = 4      # No DMA
                                                irq 0xf0 = 0x3c   # Printer mode
                                        end
                                        device pnp 2e.2   on      # UART A
                                                io  0x60 = 0x03f8
                                                irq 0x70 = 4
                                        end
                                        device pnp 2e.3   on      # IR
                                                io  0x60 = 0x02f8
                                                irq 0x70 = 3
                                        end
                                        device pnp 2e.5   on      # PS/2 KBC
                                                io  0x60 = 0x0060
                                                io  0x62 = 0x0064
                                                irq 0x70 = 1      # Keyboard
                                                irq 0x72 = 12     # Mouse
                                        end
                                        device pnp 2e.6   off end # CIR
                                        device pnp 2e.7   off end # GPIO8
                                        device pnp 2e.107 off end # GPIO9
                                        device pnp 2e.8   off end # WDT
                                        device pnp 2e.108 off end # GPIO0
                                        device pnp 2e.208 off end # GPIOA
                                        device pnp 2e.308 off end # GPIO base
                                        device pnp 2e.109 off end # GPIO1
                                        device pnp 2e.209 off end # GPIO2
                                        device pnp 2e.309 off end # GPIO3
                                        device pnp 2e.409 off end # GPIO4
                                        device pnp 2e.509 off end # GPIO5
                                        device pnp 2e.609 off end # GPIO6
                                        device pnp 2e.709 off end # GPIO7
                                        device pnp 2e.a   off end # ACPI
                                        device pnp 2e.b   on      # HWM, LED
                                                io  0x60 = 0x0290
                                                io  0x62 = 0
                                                irq 0x70 = 0
                                        end
                                        device pnp 2e.d   off end # VID
                                        device pnp 2e.e   off end # CIR wake-up
                                        device pnp 2e.f   off end # GPIO PP/OD
                                        device pnp 2e.14  off end # SVID
                                        device pnp 2e.16  off end # Deep sleep
                                        device pnp 2e.17  off end # GPIOA
                                end
                        end
                        device pci 1f.2 on # SATA controller 1
                                subsystemid 0x1849 0x8c02
                        end
                        device pci 1f.3 on # SMBus
                                subsystemid 0x1849 0x8c22
                        end
                        device pci 1f.5 off end # SATA controller 2
                        device pci 1f.6 off end # Thermal
                end
        end
end