mb/google/brya: Create rull variant
[coreboot2.git] / src / mainboard / hp / folio_9480m / devicetree.cb
blobe47e6826230b9ff13dfa34db98628b6de0a699c5
1 chip northbridge/intel/haswell
2 register "dq_pins_interleaved" = "true"
3 register "ec_present" = "true"
4 register "gfx" = "GMA_STATIC_DISPLAYS(0)"
5 register "gpu_dp_b_hotplug" = "4"
6 register "gpu_dp_c_hotplug" = "4"
7 register "panel_cfg" = "{
8 .up_delay_ms = 200,
9 .down_delay_ms = 50,
10 .cycle_delay_ms = 500,
11 .backlight_on_delay_ms = 1,
12 .backlight_off_delay_ms = 1,
13 .backlight_pwm_hz = 200,
15 register "usb_xhci_on_resume" = "true"
16 register "spd_addresses" = "{0x50, 0, 0x52, 0}"
17 chip cpu/intel/haswell
18 device cpu_cluster 0 on ops haswell_cpu_bus_ops end
19 end
20 device domain 0 on
21 ops haswell_pci_domain_ops
22 subsystemid 0x103c 0x22da inherit
23 device pci 00.0 on end # Host bridge
24 device pci 02.0 on end # Internal graphics VGA controller
25 device pci 03.0 on end # Mini-HD audio
27 chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH
28 register "gen1_dec" = "0x007c0201"
29 register "gen2_dec" = "0x000c0101"
30 register "gen4_dec" = "0x000402e9"
31 register "xhci_default" = "1"
32 register "sata_port1_gen3_dtle" = "0x6"
33 # SATA(1), M.2(3)
34 register "sata_port_map" = "0xa"
35 device pci 13.0 off end # Intel Smart Sound DSP
36 device pci 14.0 on end # xHCI Controller
37 device pci 15.0 off end # Serial I/O DMA
38 device pci 15.1 off end # I2C0
39 device pci 15.2 off end # I2C1
40 device pci 15.3 off end # GSPI0
41 device pci 15.4 off end # GSPI1
42 device pci 15.5 off end # UART0
43 device pci 15.6 off end # UART1
44 device pci 16.0 on end # Management Engine Interface 1
45 device pci 16.1 off end # Management Engine Interface 2
46 device pci 16.2 off end # Management Engine IDE-R
47 device pci 16.3 off end # Management Engine KT
48 device pci 17.0 off end # SDIO
49 device pci 19.0 on end # Intel Gigabit Ethernet
50 device pci 1b.0 on end # High Definition Audio
51 device pci 1c.0 on end # PCIe Port #1
52 device pci 1c.1 on end # PCIe Port #2, Realtek Card Reader
53 device pci 1c.2 off end # PCIe Port #3
54 device pci 1c.3 on # PCIe Port #4, WLAN
55 smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther"
56 "M.2 2230" "SlotDataBusWidth1X"
57 end
58 device pci 1c.4 off end # PCIe Port #5
59 device pci 1c.5 off end # PCIe Port #6
60 device pci 1d.0 on end # USB2 EHCI #1
61 device pci 1f.0 on # LPC bridge
62 chip drivers/pc80/tpm
63 device pnp 0c31.0 on end
64 end
65 # This laptop uses MEC1322, but it has the same interface
66 # as the KBC1126 laptops
67 chip ec/hp/kbc1126
68 register "ec_data_port" = "0x62"
69 register "ec_cmd_port" = "0x66"
70 register "ec_ctrl_reg" = "0x81"
71 register "ec_fan_ctrl_value" = "0x6b"
72 device pnp ff.1 off end
73 end
74 end
75 device pci 1f.2 on end # SATA Controller (AHCI)
76 device pci 1f.3 on end # SMBus
77 device pci 1f.6 off end # Thermal
78 end
79 end
80 end