blk: rq_data_dir() should not return a boolean
[cris-mirror.git] / arch / arm / mach-imx / tzic.c
blob4de65eeda1eb15666e9c82557f50477e37628ec8
1 /*
2 * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/init.h>
15 #include <linux/device.h>
16 #include <linux/errno.h>
17 #include <linux/io.h>
18 #include <linux/irqdomain.h>
19 #include <linux/of.h>
20 #include <linux/of_address.h>
22 #include <asm/mach/irq.h>
23 #include <asm/exception.h>
25 #include "common.h"
26 #include "hardware.h"
27 #include "irq-common.h"
30 *****************************************
31 * TZIC Registers *
32 *****************************************
35 #define TZIC_INTCNTL 0x0000 /* Control register */
36 #define TZIC_INTTYPE 0x0004 /* Controller Type register */
37 #define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
38 #define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
39 #define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
40 #define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
41 #define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
42 #define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
43 #define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
44 #define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
45 #define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
46 #define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
47 #define TZIC_PND0 0x0D00 /* Pending Register 0 */
48 #define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */
49 #define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
50 #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
51 #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
53 static void __iomem *tzic_base;
54 static struct irq_domain *domain;
56 #define TZIC_NUM_IRQS 128
58 #ifdef CONFIG_FIQ
59 static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
61 unsigned int index, mask, value;
63 index = irq >> 5;
64 if (unlikely(index >= 4))
65 return -EINVAL;
66 mask = 1U << (irq & 0x1F);
68 value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
69 if (type)
70 value &= ~mask;
71 __raw_writel(value, tzic_base + TZIC_INTSEC0(index));
73 return 0;
75 #else
76 #define tzic_set_irq_fiq NULL
77 #endif
79 #ifdef CONFIG_PM
80 static void tzic_irq_suspend(struct irq_data *d)
82 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
83 int idx = d->hwirq >> 5;
85 __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
88 static void tzic_irq_resume(struct irq_data *d)
90 int idx = d->hwirq >> 5;
92 __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
93 tzic_base + TZIC_WAKEUP0(idx));
96 #else
97 #define tzic_irq_suspend NULL
98 #define tzic_irq_resume NULL
99 #endif
101 static struct mxc_extra_irq tzic_extra_irq = {
102 #ifdef CONFIG_FIQ
103 .set_irq_fiq = tzic_set_irq_fiq,
104 #endif
107 static __init void tzic_init_gc(int idx, unsigned int irq_start)
109 struct irq_chip_generic *gc;
110 struct irq_chip_type *ct;
112 gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
113 handle_level_irq);
114 gc->private = &tzic_extra_irq;
115 gc->wake_enabled = IRQ_MSK(32);
117 ct = gc->chip_types;
118 ct->chip.irq_mask = irq_gc_mask_disable_reg;
119 ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
120 ct->chip.irq_set_wake = irq_gc_set_wake;
121 ct->chip.irq_suspend = tzic_irq_suspend;
122 ct->chip.irq_resume = tzic_irq_resume;
123 ct->regs.disable = TZIC_ENCLEAR0(idx);
124 ct->regs.enable = TZIC_ENSET0(idx);
126 irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
129 static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
131 u32 stat;
132 int i, irqofs, handled;
134 do {
135 handled = 0;
137 for (i = 0; i < 4; i++) {
138 stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
139 __raw_readl(tzic_base + TZIC_INTSEC0(i));
141 while (stat) {
142 handled = 1;
143 irqofs = fls(stat) - 1;
144 handle_domain_irq(domain, irqofs + i * 32, regs);
145 stat &= ~(1 << irqofs);
148 } while (handled);
152 * This function initializes the TZIC hardware and disables all the
153 * interrupts. It registers the interrupt enable and disable functions
154 * to the kernel for each interrupt source.
156 void __init tzic_init_irq(void)
158 struct device_node *np;
159 int irq_base;
160 int i;
162 np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
163 tzic_base = of_iomap(np, 0);
164 WARN_ON(!tzic_base);
166 /* put the TZIC into the reset value with
167 * all interrupts disabled
169 i = __raw_readl(tzic_base + TZIC_INTCNTL);
171 __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
172 __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
173 __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
175 for (i = 0; i < 4; i++)
176 __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
178 /* disable all interrupts */
179 for (i = 0; i < 4; i++)
180 __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
182 /* all IRQ no FIQ Warning :: No selection */
184 irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
185 WARN_ON(irq_base < 0);
187 domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
188 &irq_domain_simple_ops, NULL);
189 WARN_ON(!domain);
191 for (i = 0; i < 4; i++, irq_base += 32)
192 tzic_init_gc(i, irq_base);
194 set_handle_irq(tzic_handle_irq);
196 #ifdef CONFIG_FIQ
197 /* Initialize FIQ */
198 init_FIQ(FIQ_START);
199 #endif
201 pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
205 * tzic_enable_wake() - enable wakeup interrupt
207 * @return 0 if successful; non-zero otherwise
209 * This function provides an interrupt synchronization point that is required
210 * by tzic enabled platforms before entering imx specific low power modes (ie,
211 * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode).
213 int tzic_enable_wake(void)
215 unsigned int i;
217 __raw_writel(1, tzic_base + TZIC_DSMINT);
218 if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
219 return -EAGAIN;
221 for (i = 0; i < 4; i++)
222 __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
223 tzic_base + TZIC_WAKEUP0(i));
225 return 0;