arch/arm/mach-s3c24xx/pm.c

   1 /* linux/arch/arm/plat-s3c24xx/pm.c
   2  *
   3  * Copyright (c) 2004-2006 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C24XX Power Manager (Suspend-To-RAM) support
   7  *
   8  * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  23  *
  24  * Parts based on arch/arm/mach-pxa/pm.c
  25  *
  26  * Thanks to Dimitry Andric for debugging
  27 */
  28
  29 #include <linux/init.h>
  30 #include <linux/suspend.h>
  31 #include <linux/errno.h>
  32 #include <linux/time.h>
  33 #include <linux/gpio.h>
  34 #include <linux/interrupt.h>
  35 #include <linux/serial_core.h>
  36 #include <linux/serial_s3c.h>
  37 #include <linux/io.h>
  38
  39 #include <mach/regs-clock.h>
  40 #include <mach/regs-gpio.h>
  41 #include <mach/regs-irq.h>
  42 #include <mach/gpio-samsung.h>
  43
  44 #include <asm/mach/time.h>
  45
  46 #include <plat/gpio-cfg.h>
  47 #include <plat/pm.h>
  48
  49 #include "regs-mem.h"
  50
  51 #define PFX "s3c24xx-pm: "
  52
  53 #ifdef CONFIG_PM_SLEEP
  54 static struct sleep_save core_save[] = {
  55         /* we restore the timings here, with the proviso that the board
  56          * brings the system up in an slower, or equal frequency setting
  57          * to the original system.
  58          *
  59          * if we cannot guarantee this, then things are going to go very
  60          * wrong here, as we modify the refresh and both pll settings.
  61          */
  62
  63         SAVE_ITEM(S3C2410_BWSCON),
  64         SAVE_ITEM(S3C2410_BANKCON0),
  65         SAVE_ITEM(S3C2410_BANKCON1),
  66         SAVE_ITEM(S3C2410_BANKCON2),
  67         SAVE_ITEM(S3C2410_BANKCON3),
  68         SAVE_ITEM(S3C2410_BANKCON4),
  69         SAVE_ITEM(S3C2410_BANKCON5),
  70 };
  71 #endif
  72
  73 /* s3c_pm_check_resume_pin
  74  *
  75  * check to see if the pin is configured correctly for sleep mode, and
  76  * make any necessary adjustments if it is not
  77 */
  78
  79 static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
  80 {
  81         unsigned long irqstate;
  82         unsigned long pinstate;
  83         int irq = gpio_to_irq(pin);
  84
  85         if (irqoffs < 4)
  86                 irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
  87         else
  88                 irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
  89
  90         pinstate = s3c_gpio_getcfg(pin);
  91
  92         if (!irqstate) {
  93                 if (pinstate == S3C2410_GPIO_IRQ)
  94                         S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
  95         } else {
  96                 if (pinstate == S3C2410_GPIO_IRQ) {
  97                         S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
  98                         s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
  99                 }
 100         }
 101 }
 102
 103 /* s3c_pm_configure_extint
 104  *
 105  * configure all external interrupt pins
 106 */
 107
 108 void s3c_pm_configure_extint(void)
 109 {
 110         int pin;
 111
 112         /* for each of the external interrupts (EINT0..EINT15) we
 113          * need to check whether it is an external interrupt source,
 114          * and then configure it as an input if it is not
 115         */
 116
 117         for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
 118                 s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 119         }
 120
 121         for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
 122                 s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 123         }
 124 }
 125
 126 #ifdef CONFIG_PM_SLEEP
 127 void s3c_pm_restore_core(void)
 128 {
 129         s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 130 }
 131
 132 void s3c_pm_save_core(void)
 133 {
 134         s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 135 }
 136 #endif