blk: rq_data_dir() should not return a boolean
[cris-mirror.git] / arch / mips / jazz / setup.c
blobe4374a5651ce3f426d30b51377ced01bf7b298c1
1 /*
2 * Setup pointers to hardware-dependent routines.
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
9 * Copyright (C) 2001 MIPS Technologies, Inc.
10 * Copyright (C) 2007 by Thomas Bogendoerfer
12 #include <linux/eisa.h>
13 #include <linux/init.h>
14 #include <linux/ioport.h>
15 #include <linux/console.h>
16 #include <linux/screen_info.h>
17 #include <linux/platform_device.h>
18 #include <linux/serial_8250.h>
20 #include <asm/jazz.h>
21 #include <asm/jazzdma.h>
22 #include <asm/reboot.h>
23 #include <asm/pgtable.h>
24 #include <asm/tlbmisc.h>
26 extern asmlinkage void jazz_handle_int(void);
28 extern void jazz_machine_restart(char *command);
30 static struct resource jazz_io_resources[] = {
32 .start = 0x00,
33 .end = 0x1f,
34 .name = "dma1",
35 .flags = IORESOURCE_BUSY
36 }, {
37 .start = 0x40,
38 .end = 0x5f,
39 .name = "timer",
40 .flags = IORESOURCE_BUSY
41 }, {
42 .start = 0x80,
43 .end = 0x8f,
44 .name = "dma page reg",
45 .flags = IORESOURCE_BUSY
46 }, {
47 .start = 0xc0,
48 .end = 0xdf,
49 .name = "dma2",
50 .flags = IORESOURCE_BUSY
54 void __init plat_mem_setup(void)
56 int i;
58 /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
59 add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
60 /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
61 add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
62 /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
63 add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
65 set_io_port_base(JAZZ_PORT_BASE);
66 #ifdef CONFIG_EISA
67 EISA_bus = 1;
68 #endif
70 /* request I/O space for devices used on all i[345]86 PCs */
71 for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
72 request_resource(&ioport_resource, jazz_io_resources + i);
74 /* The RTC is outside the port address space */
76 _machine_restart = jazz_machine_restart;
78 #ifdef CONFIG_VT
79 screen_info = (struct screen_info) {
80 .orig_video_cols = 160,
81 .orig_video_lines = 64,
82 .orig_video_points = 16,
84 #endif
86 add_preferred_console("ttyS", 0, "9600");
89 #ifdef CONFIG_OLIVETTI_M700
90 #define UART_CLK 1843200
91 #else
92 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
93 exactly which ones ... XXX */
94 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
95 #endif
97 #define MEMPORT(_base, _irq) \
98 { \
99 .mapbase = (_base), \
100 .membase = (void *)(_base), \
101 .irq = (_irq), \
102 .uartclk = UART_CLK, \
103 .iotype = UPIO_MEM, \
104 .flags = UPF_BOOT_AUTOCONF, \
107 static struct plat_serial8250_port jazz_serial_data[] = {
108 MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
109 MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
110 { },
113 static struct platform_device jazz_serial8250_device = {
114 .name = "serial8250",
115 .id = PLAT8250_DEV_PLATFORM,
116 .dev = {
117 .platform_data = jazz_serial_data,
121 static struct resource jazz_esp_rsrc[] = {
123 .start = JAZZ_SCSI_BASE,
124 .end = JAZZ_SCSI_BASE + 31,
125 .flags = IORESOURCE_MEM
128 .start = JAZZ_SCSI_DMA,
129 .end = JAZZ_SCSI_DMA,
130 .flags = IORESOURCE_MEM
133 .start = JAZZ_SCSI_IRQ,
134 .end = JAZZ_SCSI_IRQ,
135 .flags = IORESOURCE_IRQ
139 static struct platform_device jazz_esp_pdev = {
140 .name = "jazz_esp",
141 .num_resources = ARRAY_SIZE(jazz_esp_rsrc),
142 .resource = jazz_esp_rsrc
145 static struct resource jazz_sonic_rsrc[] = {
147 .start = JAZZ_ETHERNET_BASE,
148 .end = JAZZ_ETHERNET_BASE + 0xff,
149 .flags = IORESOURCE_MEM
152 .start = JAZZ_ETHERNET_IRQ,
153 .end = JAZZ_ETHERNET_IRQ,
154 .flags = IORESOURCE_IRQ
158 static struct platform_device jazz_sonic_pdev = {
159 .name = "jazzsonic",
160 .num_resources = ARRAY_SIZE(jazz_sonic_rsrc),
161 .resource = jazz_sonic_rsrc
164 static struct resource jazz_cmos_rsrc[] = {
166 .start = 0x70,
167 .end = 0x71,
168 .flags = IORESOURCE_IO
171 .start = 8,
172 .end = 8,
173 .flags = IORESOURCE_IRQ
177 static struct platform_device jazz_cmos_pdev = {
178 .name = "rtc_cmos",
179 .num_resources = ARRAY_SIZE(jazz_cmos_rsrc),
180 .resource = jazz_cmos_rsrc
183 static struct platform_device pcspeaker_pdev = {
184 .name = "pcspkr",
185 .id = -1,
188 static int __init jazz_setup_devinit(void)
190 platform_device_register(&jazz_serial8250_device);
191 platform_device_register(&jazz_esp_pdev);
192 platform_device_register(&jazz_sonic_pdev);
193 platform_device_register(&jazz_cmos_pdev);
194 platform_device_register(&pcspeaker_pdev);
196 return 0;
199 device_initcall(jazz_setup_devinit);