drivers/ata/pata_mpc52xx.c

   1 /*
   2  * drivers/ata/pata_mpc52xx.c
   3  *
   4  * libata driver for the Freescale MPC52xx on-chip IDE interface
   5  *
   6  * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
   7  * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt
   8  *
   9  * This file is licensed under the terms of the GNU General Public License
  10  * version 2. This program is licensed "as is" without any warranty of any
  11  * kind, whether express or implied.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/module.h>
  16 #include <linux/slab.h>
  17 #include <linux/delay.h>
  18 #include <linux/libata.h>
  19
  20 #include <asm/types.h>
  21 #include <asm/prom.h>
  22 #include <asm/of_platform.h>
  23 #include <asm/mpc52xx.h>
  24
  25
  26 #define DRV_NAME        "mpc52xx_ata"
  27 #define DRV_VERSION     "0.1.2"
  28
  29
  30 /* Private structures used by the driver */
  31 struct mpc52xx_ata_timings {
  32         u32     pio1;
  33         u32     pio2;
  34 };
  35
  36 struct mpc52xx_ata_priv {
  37         unsigned int                    ipb_period;
  38         struct mpc52xx_ata __iomem *    ata_regs;
  39         int                             ata_irq;
  40         struct mpc52xx_ata_timings      timings[2];
  41         int                             csel;
  42 };
  43
  44
  45 /* ATAPI-4 PIO specs (in ns) */
  46 static const int ataspec_t0[5]    = {600, 383, 240, 180, 120};
  47 static const int ataspec_t1[5]    = { 70,  50,  30,  30,  25};
  48 static const int ataspec_t2_8[5]  = {290, 290, 290,  80,  70};
  49 static const int ataspec_t2_16[5] = {165, 125, 100,  80,  70};
  50 static const int ataspec_t2i[5]   = {  0,   0,   0,  70,  25};
  51 static const int ataspec_t4[5]    = { 30,  20,  15,  10,  10};
  52 static const int ataspec_ta[5]    = { 35,  35,  35,  35,  35};
  53
  54 #define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c)))
  55
  56
  57 /* Bit definitions inside the registers */
  58 #define MPC52xx_ATA_HOSTCONF_SMR        0x80000000UL /* State machine reset */
  59 #define MPC52xx_ATA_HOSTCONF_FR         0x40000000UL /* FIFO Reset */
  60 #define MPC52xx_ATA_HOSTCONF_IE         0x02000000UL /* Enable interrupt in PIO */
  61 #define MPC52xx_ATA_HOSTCONF_IORDY      0x01000000UL /* Drive supports IORDY protocol */
  62
  63 #define MPC52xx_ATA_HOSTSTAT_TIP        0x80000000UL /* Transaction in progress */
  64 #define MPC52xx_ATA_HOSTSTAT_UREP       0x40000000UL /* UDMA Read Extended Pause */
  65 #define MPC52xx_ATA_HOSTSTAT_RERR       0x02000000UL /* Read Error */
  66 #define MPC52xx_ATA_HOSTSTAT_WERR       0x01000000UL /* Write Error */
  67
  68 #define MPC52xx_ATA_FIFOSTAT_EMPTY      0x01 /* FIFO Empty */
  69
  70 #define MPC52xx_ATA_DMAMODE_WRITE       0x01 /* Write DMA */
  71 #define MPC52xx_ATA_DMAMODE_READ        0x02 /* Read DMA */
  72 #define MPC52xx_ATA_DMAMODE_UDMA        0x04 /* UDMA enabled */
  73 #define MPC52xx_ATA_DMAMODE_IE          0x08 /* Enable drive interrupt to CPU in DMA mode */
  74 #define MPC52xx_ATA_DMAMODE_FE          0x10 /* FIFO Flush enable in Rx mode */
  75 #define MPC52xx_ATA_DMAMODE_FR          0x20 /* FIFO Reset */
  76 #define MPC52xx_ATA_DMAMODE_HUT         0x40 /* Host UDMA burst terminate */
  77
  78
  79 /* Structure of the hardware registers */
  80 struct mpc52xx_ata {
  81
  82         /* Host interface registers */
  83         u32 config;             /* ATA + 0x00 Host configuration */
  84         u32 host_status;        /* ATA + 0x04 Host controller status */
  85         u32 pio1;               /* ATA + 0x08 PIO Timing 1 */
  86         u32 pio2;               /* ATA + 0x0c PIO Timing 2 */
  87         u32 mdma1;              /* ATA + 0x10 MDMA Timing 1 */
  88         u32 mdma2;              /* ATA + 0x14 MDMA Timing 2 */
  89         u32 udma1;              /* ATA + 0x18 UDMA Timing 1 */
  90         u32 udma2;              /* ATA + 0x1c UDMA Timing 2 */
  91         u32 udma3;              /* ATA + 0x20 UDMA Timing 3 */
  92         u32 udma4;              /* ATA + 0x24 UDMA Timing 4 */
  93         u32 udma5;              /* ATA + 0x28 UDMA Timing 5 */
  94         u32 share_cnt;          /* ATA + 0x2c ATA share counter */
  95         u32 reserved0[3];
  96
  97         /* FIFO registers */
  98         u32 fifo_data;          /* ATA + 0x3c */
  99         u8  fifo_status_frame;  /* ATA + 0x40 */
 100         u8  fifo_status;        /* ATA + 0x41 */
 101         u16 reserved7[1];
 102         u8  fifo_control;       /* ATA + 0x44 */
 103         u8  reserved8[5];
 104         u16 fifo_alarm;         /* ATA + 0x4a */
 105         u16 reserved9;
 106         u16 fifo_rdp;           /* ATA + 0x4e */
 107         u16 reserved10;
 108         u16 fifo_wrp;           /* ATA + 0x52 */
 109         u16 reserved11;
 110         u16 fifo_lfrdp;         /* ATA + 0x56 */
 111         u16 reserved12;
 112         u16 fifo_lfwrp;         /* ATA + 0x5a */
 113
 114         /* Drive TaskFile registers */
 115         u8  tf_control;         /* ATA + 0x5c TASKFILE Control/Alt Status */
 116         u8  reserved13[3];
 117         u16 tf_data;            /* ATA + 0x60 TASKFILE Data */
 118         u16 reserved14;
 119         u8  tf_features;        /* ATA + 0x64 TASKFILE Features/Error */
 120         u8  reserved15[3];
 121         u8  tf_sec_count;       /* ATA + 0x68 TASKFILE Sector Count */
 122         u8  reserved16[3];
 123         u8  tf_sec_num;         /* ATA + 0x6c TASKFILE Sector Number */
 124         u8  reserved17[3];
 125         u8  tf_cyl_low;         /* ATA + 0x70 TASKFILE Cylinder Low */
 126         u8  reserved18[3];
 127         u8  tf_cyl_high;        /* ATA + 0x74 TASKFILE Cylinder High */
 128         u8  reserved19[3];
 129         u8  tf_dev_head;        /* ATA + 0x78 TASKFILE Device/Head */
 130         u8  reserved20[3];
 131         u8  tf_command;         /* ATA + 0x7c TASKFILE Command/Status */
 132         u8  dma_mode;           /* ATA + 0x7d ATA Host DMA Mode configuration */
 133         u8  reserved21[2];
 134 };
 135
 136
 137 /* ======================================================================== */
 138 /* Aux fns                                                                  */
 139 /* ======================================================================== */
 140
 141
 142 /* MPC52xx low level hw control */
 143
 144 static int
 145 mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio)
 146 {
 147         struct mpc52xx_ata_timings *timing = &priv->timings[dev];
 148         unsigned int ipb_period = priv->ipb_period;
 149         unsigned int t0, t1, t2_8, t2_16, t2i, t4, ta;
 150
 151         if ((pio<0) || (pio>4))
 152                 return -EINVAL;
 153
 154         t0      = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]);
 155         t1      = CALC_CLKCYC(ipb_period, 1000 * ataspec_t1[pio]);
 156         t2_8    = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_8[pio]);
 157         t2_16   = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2_16[pio]);
 158         t2i     = CALC_CLKCYC(ipb_period, 1000 * ataspec_t2i[pio]);
 159         t4      = CALC_CLKCYC(ipb_period, 1000 * ataspec_t4[pio]);
 160         ta      = CALC_CLKCYC(ipb_period, 1000 * ataspec_ta[pio]);
 161
 162         timing->pio1 = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8) | (t2i);
 163         timing->pio2 = (t4 << 24) | (t1 << 16) | (ta << 8);
 164
 165         return 0;
 166 }
 167
 168 static void
 169 mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device)
 170 {
 171         struct mpc52xx_ata __iomem *regs = priv->ata_regs;
 172         struct mpc52xx_ata_timings *timing = &priv->timings[device];
 173
 174         out_be32(&regs->pio1,  timing->pio1);
 175         out_be32(&regs->pio2,  timing->pio2);
 176         out_be32(&regs->mdma1, 0);
 177         out_be32(&regs->mdma2, 0);
 178         out_be32(&regs->udma1, 0);
 179         out_be32(&regs->udma2, 0);
 180         out_be32(&regs->udma3, 0);
 181         out_be32(&regs->udma4, 0);
 182         out_be32(&regs->udma5, 0);
 183
 184         priv->csel = device;
 185 }
 186
 187 static int
 188 mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv)
 189 {
 190         struct mpc52xx_ata __iomem *regs = priv->ata_regs;
 191         int tslot;
 192
 193         /* Clear share_cnt (all sample code do this ...) */
 194         out_be32(&regs->share_cnt, 0);
 195
 196         /* Configure and reset host */
 197         out_be32(&regs->config,
 198                         MPC52xx_ATA_HOSTCONF_IE |
 199                         MPC52xx_ATA_HOSTCONF_IORDY |
 200                         MPC52xx_ATA_HOSTCONF_SMR |
 201                         MPC52xx_ATA_HOSTCONF_FR);
 202
 203         udelay(10);
 204
 205         out_be32(&regs->config,
 206                         MPC52xx_ATA_HOSTCONF_IE |
 207                         MPC52xx_ATA_HOSTCONF_IORDY);
 208
 209         /* Set the time slot to 1us */
 210         tslot = CALC_CLKCYC(priv->ipb_period, 1000000);
 211         out_be32(&regs->share_cnt, tslot << 16 );
 212
 213         /* Init timings to PIO0 */
 214         memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings));
 215
 216         mpc52xx_ata_compute_pio_timings(priv, 0, 0);
 217         mpc52xx_ata_compute_pio_timings(priv, 1, 0);
 218
 219         mpc52xx_ata_apply_timings(priv, 0);
 220
 221         return 0;
 222 }
 223
 224
 225 /* ======================================================================== */
 226 /* libata driver                                                            */
 227 /* ======================================================================== */
 228
 229 static void
 230 mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev)
 231 {
 232         struct mpc52xx_ata_priv *priv = ap->host->private_data;
 233         int pio, rv;
 234
 235         pio = adev->pio_mode - XFER_PIO_0;
 236
 237         rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio);
 238
 239         if (rv) {
 240                 printk(KERN_ERR DRV_NAME
 241                         ": Trying to select invalid PIO mode %d\n", pio);
 242                 return;
 243         }
 244
 245         mpc52xx_ata_apply_timings(priv, adev->devno);
 246 }
 247 static void
 248 mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
 249 {
 250         struct mpc52xx_ata_priv *priv = ap->host->private_data;
 251
 252         if (device != priv->csel)
 253                 mpc52xx_ata_apply_timings(priv, device);
 254
 255         ata_sff_dev_select(ap,device);
 256 }
 257
 258 static struct scsi_host_template mpc52xx_ata_sht = {
 259         ATA_PIO_SHT(DRV_NAME),
 260 };
 261
 262 static struct ata_port_operations mpc52xx_ata_port_ops = {
 263         .inherits               = &ata_sff_port_ops,
 264         .sff_dev_select         = mpc52xx_ata_dev_select,
 265         .cable_detect           = ata_cable_40wire,
 266         .set_piomode            = mpc52xx_ata_set_piomode,
 267         .post_internal_cmd      = ATA_OP_NULL,
 268 };
 269
 270 static int __devinit
 271 mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
 272                      unsigned long raw_ata_regs)
 273 {
 274         struct ata_host *host;
 275         struct ata_port *ap;
 276         struct ata_ioports *aio;
 277
 278         host = ata_host_alloc(dev, 1);
 279         if (!host)
 280                 return -ENOMEM;
 281
 282         ap = host->ports[0];
 283         ap->flags               |= ATA_FLAG_SLAVE_POSS;
 284         ap->pio_mask            = 0x1f; /* Up to PIO4 */
 285         ap->mwdma_mask          = 0x00; /* No MWDMA   */
 286         ap->udma_mask           = 0x00; /* No UDMA    */
 287         ap->ops                 = &mpc52xx_ata_port_ops;
 288         host->private_data      = priv;
 289
 290         aio = &ap->ioaddr;
 291         aio->cmd_addr           = NULL; /* Don't have a classic reg block */
 292         aio->altstatus_addr     = &priv->ata_regs->tf_control;
 293         aio->ctl_addr           = &priv->ata_regs->tf_control;
 294         aio->data_addr          = &priv->ata_regs->tf_data;
 295         aio->error_addr         = &priv->ata_regs->tf_features;
 296         aio->feature_addr       = &priv->ata_regs->tf_features;
 297         aio->nsect_addr         = &priv->ata_regs->tf_sec_count;
 298         aio->lbal_addr          = &priv->ata_regs->tf_sec_num;
 299         aio->lbam_addr          = &priv->ata_regs->tf_cyl_low;
 300         aio->lbah_addr          = &priv->ata_regs->tf_cyl_high;
 301         aio->device_addr        = &priv->ata_regs->tf_dev_head;
 302         aio->status_addr        = &priv->ata_regs->tf_command;
 303         aio->command_addr       = &priv->ata_regs->tf_command;
 304
 305         ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
 306
 307         /* activate host */
 308         return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
 309                                  &mpc52xx_ata_sht);
 310 }
 311
 312 static struct mpc52xx_ata_priv *
 313 mpc52xx_ata_remove_one(struct device *dev)
 314 {
 315         struct ata_host *host = dev_get_drvdata(dev);
 316         struct mpc52xx_ata_priv *priv = host->private_data;
 317
 318         ata_host_detach(host);
 319
 320         return priv;
 321 }
 322
 323
 324 /* ======================================================================== */
 325 /* OF Platform driver                                                       */
 326 /* ======================================================================== */
 327
 328 static int __devinit
 329 mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
 330 {
 331         unsigned int ipb_freq;
 332         struct resource res_mem;
 333         int ata_irq;
 334         struct mpc52xx_ata __iomem *ata_regs;
 335         struct mpc52xx_ata_priv *priv;
 336         int rv;
 337
 338         /* Get ipb frequency */
 339         ipb_freq = mpc52xx_find_ipb_freq(op->node);
 340         if (!ipb_freq) {
 341                 printk(KERN_ERR DRV_NAME ": "
 342                         "Unable to find IPB Bus frequency\n" );
 343                 return -ENODEV;
 344         }
 345
 346         /* Get IRQ and register */
 347         rv = of_address_to_resource(op->node, 0, &res_mem);
 348         if (rv) {
 349                 printk(KERN_ERR DRV_NAME ": "
 350                         "Error while parsing device node resource\n" );
 351                 return rv;
 352         }
 353
 354         ata_irq = irq_of_parse_and_map(op->node, 0);
 355         if (ata_irq == NO_IRQ) {
 356                 printk(KERN_ERR DRV_NAME ": "
 357                         "Error while mapping the irq\n");
 358                 return -EINVAL;
 359         }
 360
 361         /* Request mem region */
 362         if (!devm_request_mem_region(&op->dev, res_mem.start,
 363                                      sizeof(struct mpc52xx_ata), DRV_NAME)) {
 364                 printk(KERN_ERR DRV_NAME ": "
 365                         "Error while requesting mem region\n");
 366                 rv = -EBUSY;
 367                 goto err;
 368         }
 369
 370         /* Remap registers */
 371         ata_regs = devm_ioremap(&op->dev, res_mem.start,
 372                                 sizeof(struct mpc52xx_ata));
 373         if (!ata_regs) {
 374                 printk(KERN_ERR DRV_NAME ": "
 375                         "Error while mapping register set\n");
 376                 rv = -ENOMEM;
 377                 goto err;
 378         }
 379
 380         /* Prepare our private structure */
 381         priv = devm_kzalloc(&op->dev, sizeof(struct mpc52xx_ata_priv),
 382                             GFP_ATOMIC);
 383         if (!priv) {
 384                 printk(KERN_ERR DRV_NAME ": "
 385                         "Error while allocating private structure\n");
 386                 rv = -ENOMEM;
 387                 goto err;
 388         }
 389
 390         priv->ipb_period = 1000000000 / (ipb_freq / 1000);
 391         priv->ata_regs = ata_regs;
 392         priv->ata_irq = ata_irq;
 393         priv->csel = -1;
 394
 395         /* Init the hw */
 396         rv = mpc52xx_ata_hw_init(priv);
 397         if (rv) {
 398                 printk(KERN_ERR DRV_NAME ": Error during HW init\n");
 399                 goto err;
 400         }
 401
 402         /* Register ourselves to libata */
 403         rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start);
 404         if (rv) {
 405                 printk(KERN_ERR DRV_NAME ": "
 406                         "Error while registering to ATA layer\n");
 407                 return rv;
 408         }
 409
 410         /* Done */
 411         return 0;
 412
 413         /* Error path */
 414 err:
 415         irq_dispose_mapping(ata_irq);
 416         return rv;
 417 }
 418
 419 static int
 420 mpc52xx_ata_remove(struct of_device *op)
 421 {
 422         struct mpc52xx_ata_priv *priv;
 423
 424         priv = mpc52xx_ata_remove_one(&op->dev);
 425         irq_dispose_mapping(priv->ata_irq);
 426
 427         return 0;
 428 }
 429
 430
 431 #ifdef CONFIG_PM
 432
 433 static int
 434 mpc52xx_ata_suspend(struct of_device *op, pm_message_t state)
 435 {
 436         struct ata_host *host = dev_get_drvdata(&op->dev);
 437
 438         return ata_host_suspend(host, state);
 439 }
 440
 441 static int
 442 mpc52xx_ata_resume(struct of_device *op)
 443 {
 444         struct ata_host *host = dev_get_drvdata(&op->dev);
 445         struct mpc52xx_ata_priv *priv = host->private_data;
 446         int rv;
 447
 448         rv = mpc52xx_ata_hw_init(priv);
 449         if (rv) {
 450                 printk(KERN_ERR DRV_NAME ": Error during HW init\n");
 451                 return rv;
 452         }
 453
 454         ata_host_resume(host);
 455
 456         return 0;
 457 }
 458
 459 #endif
 460
 461
 462 static struct of_device_id mpc52xx_ata_of_match[] = {
 463         { .compatible = "fsl,mpc5200-ata", },
 464         { .compatible = "mpc5200-ata", },
 465         {},
 466 };
 467
 468
 469 static struct of_platform_driver mpc52xx_ata_of_platform_driver = {
 470         .owner          = THIS_MODULE,
 471         .name           = DRV_NAME,
 472         .match_table    = mpc52xx_ata_of_match,
 473         .probe          = mpc52xx_ata_probe,
 474         .remove         = mpc52xx_ata_remove,
 475 #ifdef CONFIG_PM
 476         .suspend        = mpc52xx_ata_suspend,
 477         .resume         = mpc52xx_ata_resume,
 478 #endif
 479         .driver         = {
 480                 .name   = DRV_NAME,
 481                 .owner  = THIS_MODULE,
 482         },
 483 };
 484
 485
 486 /* ======================================================================== */
 487 /* Module                                                                   */
 488 /* ======================================================================== */
 489
 490 static int __init
 491 mpc52xx_ata_init(void)
 492 {
 493         printk(KERN_INFO "ata: MPC52xx IDE/ATA libata driver\n");
 494         return of_register_platform_driver(&mpc52xx_ata_of_platform_driver);
 495 }
 496
 497 static void __exit
 498 mpc52xx_ata_exit(void)
 499 {
 500         of_unregister_platform_driver(&mpc52xx_ata_of_platform_driver);
 501 }
 502
 503 module_init(mpc52xx_ata_init);
 504 module_exit(mpc52xx_ata_exit);
 505
 506 MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
 507 MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver");
 508 MODULE_LICENSE("GPL");
 509 MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match);
 510 MODULE_VERSION(DRV_VERSION);
 511