FRV: Use generic show_interrupts()
[cris-mirror.git] / drivers / mtd / maps / esb2rom.c
blob4feb7507ab7c9a4906f66a735a176668e665656a
1 /*
2 * esb2rom.c
4 * Normal mappings of flash chips in physical memory
5 * through the Intel ESB2 Southbridge.
7 * This was derived from ichxrom.c in May 2006 by
8 * Lew Glendenning <lglendenning@lnxi.com>
10 * Eric Biederman, of course, was a major help in this effort.
13 #include <linux/module.h>
14 #include <linux/types.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <asm/io.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/map.h>
21 #include <linux/mtd/cfi.h>
22 #include <linux/mtd/flashchip.h>
23 #include <linux/pci.h>
24 #include <linux/pci_ids.h>
25 #include <linux/list.h>
27 #define MOD_NAME KBUILD_BASENAME
29 #define ADDRESS_NAME_LEN 18
31 #define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
33 #define BIOS_CNTL 0xDC
34 #define BIOS_LOCK_ENABLE 0x02
35 #define BIOS_WRITE_ENABLE 0x01
37 /* This became a 16-bit register, and EN2 has disappeared */
38 #define FWH_DEC_EN1 0xD8
39 #define FWH_F8_EN 0x8000
40 #define FWH_F0_EN 0x4000
41 #define FWH_E8_EN 0x2000
42 #define FWH_E0_EN 0x1000
43 #define FWH_D8_EN 0x0800
44 #define FWH_D0_EN 0x0400
45 #define FWH_C8_EN 0x0200
46 #define FWH_C0_EN 0x0100
47 #define FWH_LEGACY_F_EN 0x0080
48 #define FWH_LEGACY_E_EN 0x0040
49 /* reserved 0x0020 and 0x0010 */
50 #define FWH_70_EN 0x0008
51 #define FWH_60_EN 0x0004
52 #define FWH_50_EN 0x0002
53 #define FWH_40_EN 0x0001
55 /* these are 32-bit values */
56 #define FWH_SEL1 0xD0
57 #define FWH_SEL2 0xD4
59 #define FWH_8MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
60 FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
61 FWH_70_EN | FWH_60_EN | FWH_50_EN | FWH_40_EN)
63 #define FWH_7MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
64 FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
65 FWH_70_EN | FWH_60_EN | FWH_50_EN)
67 #define FWH_6MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
68 FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
69 FWH_70_EN | FWH_60_EN)
71 #define FWH_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
72 FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN | \
73 FWH_70_EN)
75 #define FWH_4MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
76 FWH_D8_EN | FWH_D0_EN | FWH_C8_EN | FWH_C0_EN)
78 #define FWH_3_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
79 FWH_D8_EN | FWH_D0_EN | FWH_C8_EN)
81 #define FWH_3MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
82 FWH_D8_EN | FWH_D0_EN)
84 #define FWH_2_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN | \
85 FWH_D8_EN)
87 #define FWH_2MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN | FWH_E0_EN)
89 #define FWH_1_5MiB (FWH_F8_EN | FWH_F0_EN | FWH_E8_EN)
91 #define FWH_1MiB (FWH_F8_EN | FWH_F0_EN)
93 #define FWH_0_5MiB (FWH_F8_EN)
96 struct esb2rom_window {
97 void __iomem* virt;
98 unsigned long phys;
99 unsigned long size;
100 struct list_head maps;
101 struct resource rsrc;
102 struct pci_dev *pdev;
105 struct esb2rom_map_info {
106 struct list_head list;
107 struct map_info map;
108 struct mtd_info *mtd;
109 struct resource rsrc;
110 char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
113 static struct esb2rom_window esb2rom_window = {
114 .maps = LIST_HEAD_INIT(esb2rom_window.maps),
117 static void esb2rom_cleanup(struct esb2rom_window *window)
119 struct esb2rom_map_info *map, *scratch;
120 u8 byte;
122 /* Disable writes through the rom window */
123 pci_read_config_byte(window->pdev, BIOS_CNTL, &byte);
124 pci_write_config_byte(window->pdev, BIOS_CNTL,
125 byte & ~BIOS_WRITE_ENABLE);
127 /* Free all of the mtd devices */
128 list_for_each_entry_safe(map, scratch, &window->maps, list) {
129 if (map->rsrc.parent)
130 release_resource(&map->rsrc);
131 del_mtd_device(map->mtd);
132 map_destroy(map->mtd);
133 list_del(&map->list);
134 kfree(map);
136 if (window->rsrc.parent)
137 release_resource(&window->rsrc);
138 if (window->virt) {
139 iounmap(window->virt);
140 window->virt = NULL;
141 window->phys = 0;
142 window->size = 0;
144 pci_dev_put(window->pdev);
147 static int __devinit esb2rom_init_one(struct pci_dev *pdev,
148 const struct pci_device_id *ent)
150 static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
151 struct esb2rom_window *window = &esb2rom_window;
152 struct esb2rom_map_info *map = NULL;
153 unsigned long map_top;
154 u8 byte;
155 u16 word;
157 /* For now I just handle the ecb2 and I assume there
158 * are not a lot of resources up at the top of the address
159 * space. It is possible to handle other devices in the
160 * top 16MiB but it is very painful. Also since
161 * you can only really attach a FWH to an ICHX there
162 * a number of simplifications you can make.
164 * Also you can page firmware hubs if an 8MiB window isn't enough
165 * but don't currently handle that case either.
167 window->pdev = pci_dev_get(pdev);
169 /* RLG: experiment 2. Force the window registers to the widest values */
172 pci_read_config_word(pdev, FWH_DEC_EN1, &word);
173 printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word);
174 pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff);
175 pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
176 printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte);
178 pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
179 printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte);
180 pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f);
181 pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
182 printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte);
185 /* Find a region continuous to the end of the ROM window */
186 window->phys = 0;
187 pci_read_config_word(pdev, FWH_DEC_EN1, &word);
188 printk(KERN_DEBUG "pci_read_config_word : %x\n", word);
190 if ((word & FWH_8MiB) == FWH_8MiB)
191 window->phys = 0xff400000;
192 else if ((word & FWH_7MiB) == FWH_7MiB)
193 window->phys = 0xff500000;
194 else if ((word & FWH_6MiB) == FWH_6MiB)
195 window->phys = 0xff600000;
196 else if ((word & FWH_5MiB) == FWH_5MiB)
197 window->phys = 0xFF700000;
198 else if ((word & FWH_4MiB) == FWH_4MiB)
199 window->phys = 0xffc00000;
200 else if ((word & FWH_3_5MiB) == FWH_3_5MiB)
201 window->phys = 0xffc80000;
202 else if ((word & FWH_3MiB) == FWH_3MiB)
203 window->phys = 0xffd00000;
204 else if ((word & FWH_2_5MiB) == FWH_2_5MiB)
205 window->phys = 0xffd80000;
206 else if ((word & FWH_2MiB) == FWH_2MiB)
207 window->phys = 0xffe00000;
208 else if ((word & FWH_1_5MiB) == FWH_1_5MiB)
209 window->phys = 0xffe80000;
210 else if ((word & FWH_1MiB) == FWH_1MiB)
211 window->phys = 0xfff00000;
212 else if ((word & FWH_0_5MiB) == FWH_0_5MiB)
213 window->phys = 0xfff80000;
215 if (window->phys == 0) {
216 printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
217 goto out;
220 /* reserved 0x0020 and 0x0010 */
221 window->phys -= 0x400000UL;
222 window->size = (0xffffffffUL - window->phys) + 1UL;
224 /* Enable writes through the rom window */
225 pci_read_config_byte(pdev, BIOS_CNTL, &byte);
226 if (!(byte & BIOS_WRITE_ENABLE) && (byte & (BIOS_LOCK_ENABLE))) {
227 /* The BIOS will generate an error if I enable
228 * this device, so don't even try.
230 printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
231 goto out;
233 pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE);
236 * Try to reserve the window mem region. If this fails then
237 * it is likely due to the window being "reseved" by the BIOS.
239 window->rsrc.name = MOD_NAME;
240 window->rsrc.start = window->phys;
241 window->rsrc.end = window->phys + window->size - 1;
242 window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
243 if (request_resource(&iomem_resource, &window->rsrc)) {
244 window->rsrc.parent = NULL;
245 printk(KERN_DEBUG MOD_NAME ": "
246 "%s(): Unable to register resource %pR - kernel bug?\n",
247 __func__, &window->rsrc);
250 /* Map the firmware hub into my address space. */
251 window->virt = ioremap_nocache(window->phys, window->size);
252 if (!window->virt) {
253 printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
254 window->phys, window->size);
255 goto out;
258 /* Get the first address to look for an rom chip at */
259 map_top = window->phys;
260 if ((window->phys & 0x3fffff) != 0) {
261 /* if not aligned on 4MiB, look 4MiB lower in address space */
262 map_top = window->phys + 0x400000;
264 #if 1
265 /* The probe sequence run over the firmware hub lock
266 * registers sets them to 0x7 (no access).
267 * (Insane hardware design, but most copied Intel's.)
268 * ==> Probe at most the last 4M of the address space.
270 if (map_top < 0xffc00000)
271 map_top = 0xffc00000;
272 #endif
273 /* Loop through and look for rom chips */
274 while ((map_top - 1) < 0xffffffffUL) {
275 struct cfi_private *cfi;
276 unsigned long offset;
277 int i;
279 if (!map)
280 map = kmalloc(sizeof(*map), GFP_KERNEL);
281 if (!map) {
282 printk(KERN_ERR MOD_NAME ": kmalloc failed");
283 goto out;
285 memset(map, 0, sizeof(*map));
286 INIT_LIST_HEAD(&map->list);
287 map->map.name = map->map_name;
288 map->map.phys = map_top;
289 offset = map_top - window->phys;
290 map->map.virt = (void __iomem *)
291 (((unsigned long)(window->virt)) + offset);
292 map->map.size = 0xffffffffUL - map_top + 1UL;
293 /* Set the name of the map to the address I am trying */
294 sprintf(map->map_name, "%s @%08Lx",
295 MOD_NAME, (unsigned long long)map->map.phys);
297 /* Firmware hubs only use vpp when being programmed
298 * in a factory setting. So in-place programming
299 * needs to use a different method.
301 for(map->map.bankwidth = 32; map->map.bankwidth;
302 map->map.bankwidth >>= 1) {
303 char **probe_type;
304 /* Skip bankwidths that are not supported */
305 if (!map_bankwidth_supported(map->map.bankwidth))
306 continue;
308 /* Setup the map methods */
309 simple_map_init(&map->map);
311 /* Try all of the probe methods */
312 probe_type = rom_probe_types;
313 for(; *probe_type; probe_type++) {
314 map->mtd = do_map_probe(*probe_type, &map->map);
315 if (map->mtd)
316 goto found;
319 map_top += ROM_PROBE_STEP_SIZE;
320 continue;
321 found:
322 /* Trim the size if we are larger than the map */
323 if (map->mtd->size > map->map.size) {
324 printk(KERN_WARNING MOD_NAME
325 " rom(%llu) larger than window(%lu). fixing...\n",
326 (unsigned long long)map->mtd->size, map->map.size);
327 map->mtd->size = map->map.size;
329 if (window->rsrc.parent) {
331 * Registering the MTD device in iomem may not be possible
332 * if there is a BIOS "reserved" and BUSY range. If this
333 * fails then continue anyway.
335 map->rsrc.name = map->map_name;
336 map->rsrc.start = map->map.phys;
337 map->rsrc.end = map->map.phys + map->mtd->size - 1;
338 map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
339 if (request_resource(&window->rsrc, &map->rsrc)) {
340 printk(KERN_ERR MOD_NAME
341 ": cannot reserve MTD resource\n");
342 map->rsrc.parent = NULL;
346 /* Make the whole region visible in the map */
347 map->map.virt = window->virt;
348 map->map.phys = window->phys;
349 cfi = map->map.fldrv_priv;
350 for(i = 0; i < cfi->numchips; i++)
351 cfi->chips[i].start += offset;
353 /* Now that the mtd devices is complete claim and export it */
354 map->mtd->owner = THIS_MODULE;
355 if (add_mtd_device(map->mtd)) {
356 map_destroy(map->mtd);
357 map->mtd = NULL;
358 goto out;
361 /* Calculate the new value of map_top */
362 map_top += map->mtd->size;
364 /* File away the map structure */
365 list_add(&map->list, &window->maps);
366 map = NULL;
369 out:
370 /* Free any left over map structures */
371 kfree(map);
373 /* See if I have any map structures */
374 if (list_empty(&window->maps)) {
375 esb2rom_cleanup(window);
376 return -ENODEV;
378 return 0;
381 static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
383 struct esb2rom_window *window = &esb2rom_window;
384 esb2rom_cleanup(window);
387 static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
388 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
389 PCI_ANY_ID, PCI_ANY_ID, },
390 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
391 PCI_ANY_ID, PCI_ANY_ID, },
392 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
393 PCI_ANY_ID, PCI_ANY_ID, },
394 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
395 PCI_ANY_ID, PCI_ANY_ID, },
396 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
397 PCI_ANY_ID, PCI_ANY_ID, },
398 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
399 PCI_ANY_ID, PCI_ANY_ID, },
400 { 0, },
403 #if 0
404 MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl);
406 static struct pci_driver esb2rom_driver = {
407 .name = MOD_NAME,
408 .id_table = esb2rom_pci_tbl,
409 .probe = esb2rom_init_one,
410 .remove = esb2rom_remove_one,
412 #endif
414 static int __init init_esb2rom(void)
416 struct pci_dev *pdev;
417 struct pci_device_id *id;
418 int retVal;
420 pdev = NULL;
421 for (id = esb2rom_pci_tbl; id->vendor; id++) {
422 printk(KERN_DEBUG "device id = %x\n", id->device);
423 pdev = pci_get_device(id->vendor, id->device, NULL);
424 if (pdev) {
425 printk(KERN_DEBUG "matched device = %x\n", id->device);
426 break;
429 if (pdev) {
430 printk(KERN_DEBUG "matched device id %x\n", id->device);
431 retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]);
432 pci_dev_put(pdev);
433 printk(KERN_DEBUG "retVal = %d\n", retVal);
434 return retVal;
436 return -ENXIO;
437 #if 0
438 return pci_register_driver(&esb2rom_driver);
439 #endif
442 static void __exit cleanup_esb2rom(void)
444 esb2rom_remove_one(esb2rom_window.pdev);
447 module_init(init_esb2rom);
448 module_exit(cleanup_esb2rom);
450 MODULE_LICENSE("GPL");
451 MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>");
452 MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge");