drivers/rapidio/switches/idt_gen2.c

   1 /*
   2  * IDT CPS Gen.2 Serial RapidIO switch family support
   3  *
   4  * Copyright 2010 Integrated Device Technology, Inc.
   5  * Alexandre Bounine <alexandre.bounine@idt.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 #include <linux/rio.h>
  14 #include <linux/rio_drv.h>
  15 #include <linux/rio_ids.h>
  16 #include <linux/delay.h>
  17 #include "../rio.h"
  18
  19 #define LOCAL_RTE_CONF_DESTID_SEL       0x010070
  20 #define LOCAL_RTE_CONF_DESTID_SEL_PSEL  0x0000001f
  21
  22 #define IDT_LT_ERR_REPORT_EN    0x03100c
  23
  24 #define IDT_PORT_ERR_REPORT_EN(n)       (0x031044 + (n)*0x40)
  25 #define IDT_PORT_ERR_REPORT_EN_BC       0x03ff04
  26
  27 #define IDT_PORT_ISERR_REPORT_EN(n)     (0x03104C + (n)*0x40)
  28 #define IDT_PORT_ISERR_REPORT_EN_BC     0x03ff0c
  29 #define IDT_PORT_INIT_TX_ACQUIRED       0x00000020
  30
  31 #define IDT_LANE_ERR_REPORT_EN(n)       (0x038010 + (n)*0x100)
  32 #define IDT_LANE_ERR_REPORT_EN_BC       0x03ff10
  33
  34 #define IDT_DEV_CTRL_1          0xf2000c
  35 #define IDT_DEV_CTRL_1_GENPW            0x02000000
  36 #define IDT_DEV_CTRL_1_PRSTBEH          0x00000001
  37
  38 #define IDT_CFGBLK_ERR_CAPTURE_EN       0x020008
  39 #define IDT_CFGBLK_ERR_REPORT           0xf20014
  40 #define IDT_CFGBLK_ERR_REPORT_GENPW             0x00000002
  41
  42 #define IDT_AUX_PORT_ERR_CAP_EN 0x020000
  43 #define IDT_AUX_ERR_REPORT_EN   0xf20018
  44 #define IDT_AUX_PORT_ERR_LOG_I2C        0x00000002
  45 #define IDT_AUX_PORT_ERR_LOG_JTAG       0x00000001
  46
  47 #define IDT_ISLTL_ADDRESS_CAP   0x021014
  48
  49 #define IDT_RIO_DOMAIN          0xf20020
  50 #define IDT_RIO_DOMAIN_MASK             0x000000ff
  51
  52 #define IDT_PW_INFO_CSR         0xf20024
  53
  54 #define IDT_SOFT_RESET          0xf20040
  55 #define IDT_SOFT_RESET_REQ              0x00030097
  56
  57 #define IDT_I2C_MCTRL           0xf20050
  58 #define IDT_I2C_MCTRL_GENPW             0x04000000
  59
  60 #define IDT_JTAG_CTRL           0xf2005c
  61 #define IDT_JTAG_CTRL_GENPW             0x00000002
  62
  63 #define IDT_LANE_CTRL(n)        (0xff8000 + (n)*0x100)
  64 #define IDT_LANE_CTRL_BC        0xffff00
  65 #define IDT_LANE_CTRL_GENPW             0x00200000
  66 #define IDT_LANE_DFE_1_BC       0xffff18
  67 #define IDT_LANE_DFE_2_BC       0xffff1c
  68
  69 #define IDT_PORT_OPS(n)         (0xf40004 + (n)*0x100)
  70 #define IDT_PORT_OPS_GENPW              0x08000000
  71 #define IDT_PORT_OPS_PL_ELOG            0x00000040
  72 #define IDT_PORT_OPS_LL_ELOG            0x00000020
  73 #define IDT_PORT_OPS_LT_ELOG            0x00000010
  74 #define IDT_PORT_OPS_BC         0xf4ff04
  75
  76 #define IDT_PORT_ISERR_DET(n)   (0xf40008 + (n)*0x100)
  77
  78 #define IDT_ERR_CAP             0xfd0000
  79 #define IDT_ERR_CAP_LOG_OVERWR          0x00000004
  80
  81 #define IDT_ERR_RD              0xfd0004
  82
  83 #define IDT_DEFAULT_ROUTE       0xde
  84 #define IDT_NO_ROUTE            0xdf
  85
  86 static int
  87 idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
  88                        u16 table, u16 route_destid, u8 route_port)
  89 {
  90         /*
  91          * Select routing table to update
  92          */
  93         if (table == RIO_GLOBAL_TABLE)
  94                 table = 0;
  95         else
  96                 table++;
  97
  98         rio_mport_write_config_32(mport, destid, hopcount,
  99                                   LOCAL_RTE_CONF_DESTID_SEL, table);
 100
 101         /*
 102          * Program destination port for the specified destID
 103          */
 104         rio_mport_write_config_32(mport, destid, hopcount,
 105                                   RIO_STD_RTE_CONF_DESTID_SEL_CSR,
 106                                   (u32)route_destid);
 107
 108         rio_mport_write_config_32(mport, destid, hopcount,
 109                                   RIO_STD_RTE_CONF_PORT_SEL_CSR,
 110                                   (u32)route_port);
 111         udelay(10);
 112
 113         return 0;
 114 }
 115
 116 static int
 117 idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
 118                        u16 table, u16 route_destid, u8 *route_port)
 119 {
 120         u32 result;
 121
 122         /*
 123          * Select routing table to read
 124          */
 125         if (table == RIO_GLOBAL_TABLE)
 126                 table = 0;
 127         else
 128                 table++;
 129
 130         rio_mport_write_config_32(mport, destid, hopcount,
 131                                   LOCAL_RTE_CONF_DESTID_SEL, table);
 132
 133         rio_mport_write_config_32(mport, destid, hopcount,
 134                                   RIO_STD_RTE_CONF_DESTID_SEL_CSR,
 135                                   route_destid);
 136
 137         rio_mport_read_config_32(mport, destid, hopcount,
 138                                  RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
 139
 140         if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
 141                 *route_port = RIO_INVALID_ROUTE;
 142         else
 143                 *route_port = (u8)result;
 144
 145         return 0;
 146 }
 147
 148 static int
 149 idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
 150                        u16 table)
 151 {
 152         u32 i;
 153
 154         /*
 155          * Select routing table to read
 156          */
 157         if (table == RIO_GLOBAL_TABLE)
 158                 table = 0;
 159         else
 160                 table++;
 161
 162         rio_mport_write_config_32(mport, destid, hopcount,
 163                                   LOCAL_RTE_CONF_DESTID_SEL, table);
 164
 165         for (i = RIO_STD_RTE_CONF_EXTCFGEN;
 166              i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
 167                 rio_mport_write_config_32(mport, destid, hopcount,
 168                         RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
 169                 rio_mport_write_config_32(mport, destid, hopcount,
 170                         RIO_STD_RTE_CONF_PORT_SEL_CSR,
 171                         (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
 172                         (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
 173                 i += 4;
 174         }
 175
 176         return 0;
 177 }
 178
 179
 180 static int
 181 idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
 182                        u8 sw_domain)
 183 {
 184         /*
 185          * Switch domain configuration operates only at global level
 186          */
 187         rio_mport_write_config_32(mport, destid, hopcount,
 188                                   IDT_RIO_DOMAIN, (u32)sw_domain);
 189         return 0;
 190 }
 191
 192 static int
 193 idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
 194                        u8 *sw_domain)
 195 {
 196         u32 regval;
 197
 198         /*
 199          * Switch domain configuration operates only at global level
 200          */
 201         rio_mport_read_config_32(mport, destid, hopcount,
 202                                 IDT_RIO_DOMAIN, &regval);
 203
 204         *sw_domain = (u8)(regval & 0xff);
 205
 206         return 0;
 207 }
 208
 209 static int
 210 idtg2_em_init(struct rio_dev *rdev)
 211 {
 212         u32 regval;
 213         int i, tmp;
 214
 215         /*
 216          * This routine performs device-specific initialization only.
 217          * All standard EM configuration should be performed at upper level.
 218          */
 219
 220         pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
 221
 222         /* Set Port-Write info CSR: PRIO=3 and CRF=1 */
 223         rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000);
 224
 225         /*
 226          * Configure LT LAYER error reporting.
 227          */
 228
 229         /* Enable standard (RIO.p8) error reporting */
 230         rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN,
 231                         REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
 232                         REM_LTL_ERR_UNSUPTR);
 233
 234         /* Use Port-Writes for LT layer error reporting.
 235          * Enable per-port reset
 236          */
 237         rio_read_config_32(rdev, IDT_DEV_CTRL_1, &regval);
 238         rio_write_config_32(rdev, IDT_DEV_CTRL_1,
 239                         regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
 240
 241         /*
 242          * Configure PORT error reporting.
 243          */
 244
 245         /* Report all RIO.p8 errors supported by device */
 246         rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
 247
 248         /* Configure reporting of implementation specific errors/events */
 249         rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC,
 250                             IDT_PORT_INIT_TX_ACQUIRED);
 251
 252         /* Use Port-Writes for port error reporting and enable error logging */
 253         tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
 254         for (i = 0; i < tmp; i++) {
 255                 rio_read_config_32(rdev, IDT_PORT_OPS(i), &regval);
 256                 rio_write_config_32(rdev,
 257                                 IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
 258                                 IDT_PORT_OPS_PL_ELOG |
 259                                 IDT_PORT_OPS_LL_ELOG |
 260                                 IDT_PORT_OPS_LT_ELOG);
 261         }
 262         /* Overwrite error log if full */
 263         rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
 264
 265         /*
 266          * Configure LANE error reporting.
 267          */
 268
 269         /* Disable line error reporting */
 270         rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0);
 271
 272         /* Use Port-Writes for lane error reporting (when enabled)
 273          * (do per-lane update because lanes may have different configuration)
 274          */
 275         tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
 276         for (i = 0; i < tmp; i++) {
 277                 rio_read_config_32(rdev, IDT_LANE_CTRL(i), &regval);
 278                 rio_write_config_32(rdev, IDT_LANE_CTRL(i),
 279                                     regval | IDT_LANE_CTRL_GENPW);
 280         }
 281
 282         /*
 283          * Configure AUX error reporting.
 284          */
 285
 286         /* Disable JTAG and I2C Error capture */
 287         rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0);
 288
 289         /* Disable JTAG and I2C Error reporting/logging */
 290         rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0);
 291
 292         /* Disable Port-Write notification from JTAG */
 293         rio_write_config_32(rdev, IDT_JTAG_CTRL, 0);
 294
 295         /* Disable Port-Write notification from I2C */
 296         rio_read_config_32(rdev, IDT_I2C_MCTRL, &regval);
 297         rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW);
 298
 299         /*
 300          * Configure CFG_BLK error reporting.
 301          */
 302
 303         /* Disable Configuration Block error capture */
 304         rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0);
 305
 306         /* Disable Port-Writes for Configuration Block error reporting */
 307         rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, &regval);
 308         rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT,
 309                             regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
 310
 311         /* set TVAL = ~50us */
 312         rio_write_config_32(rdev,
 313                 rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
 314
 315         return 0;
 316 }
 317
 318 static int
 319 idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
 320 {
 321         u32 regval, em_perrdet, em_ltlerrdet;
 322
 323         rio_read_config_32(rdev,
 324                 rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
 325         if (em_ltlerrdet) {
 326                 /* Service Logical/Transport Layer Error(s) */
 327                 if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
 328                         /* Implementation specific error reported */
 329                         rio_read_config_32(rdev,
 330                                         IDT_ISLTL_ADDRESS_CAP, &regval);
 331
 332                         pr_debug("RIO: %s Implementation Specific LTL errors" \
 333                                  " 0x%x @(0x%x)\n",
 334                                  rio_name(rdev), em_ltlerrdet, regval);
 335
 336                         /* Clear implementation specific address capture CSR */
 337                         rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0);
 338
 339                 }
 340         }
 341
 342         rio_read_config_32(rdev,
 343                 rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
 344         if (em_perrdet) {
 345                 /* Service Port-Level Error(s) */
 346                 if (em_perrdet & REM_PED_IMPL_SPEC) {
 347                         /* Implementation Specific port error reported */
 348
 349                         /* Get IS errors reported */
 350                         rio_read_config_32(rdev,
 351                                         IDT_PORT_ISERR_DET(portnum), &regval);
 352
 353                         pr_debug("RIO: %s Implementation Specific Port" \
 354                                  " errors 0x%x\n", rio_name(rdev), regval);
 355
 356                         /* Clear all implementation specific events */
 357                         rio_write_config_32(rdev,
 358                                         IDT_PORT_ISERR_DET(portnum), 0);
 359                 }
 360         }
 361
 362         return 0;
 363 }
 364
 365 static ssize_t
 366 idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
 367 {
 368         struct rio_dev *rdev = to_rio_dev(dev);
 369         ssize_t len = 0;
 370         u32 regval;
 371
 372         while (!rio_read_config_32(rdev, IDT_ERR_RD, &regval)) {
 373                 if (!regval)    /* 0 = end of log */
 374                         break;
 375                 len += snprintf(buf + len, PAGE_SIZE - len,
 376                                         "%08x\n", regval);
 377                 if (len >= (PAGE_SIZE - 10))
 378                         break;
 379         }
 380
 381         return len;
 382 }
 383
 384 static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
 385
 386 static int idtg2_sysfs(struct rio_dev *rdev, int create)
 387 {
 388         struct device *dev = &rdev->dev;
 389         int err = 0;
 390
 391         if (create == RIO_SW_SYSFS_CREATE) {
 392                 /* Initialize sysfs entries */
 393                 err = device_create_file(dev, &dev_attr_errlog);
 394                 if (err)
 395                         dev_err(dev, "Unable create sysfs errlog file\n");
 396         } else
 397                 device_remove_file(dev, &dev_attr_errlog);
 398
 399         return err;
 400 }
 401
 402 static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
 403 {
 404         pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
 405         rdev->rswitch->add_entry = idtg2_route_add_entry;
 406         rdev->rswitch->get_entry = idtg2_route_get_entry;
 407         rdev->rswitch->clr_table = idtg2_route_clr_table;
 408         rdev->rswitch->set_domain = idtg2_set_domain;
 409         rdev->rswitch->get_domain = idtg2_get_domain;
 410         rdev->rswitch->em_init = idtg2_em_init;
 411         rdev->rswitch->em_handle = idtg2_em_handler;
 412         rdev->rswitch->sw_sysfs = idtg2_sysfs;
 413
 414         return 0;
 415 }
 416
 417 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init);
 418 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init);
 419 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTVPS1616, idtg2_switch_init);
 420 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTSPS1616, idtg2_switch_init);