Linux 3.11-rc3
[cris-mirror.git] / arch / arm / mach-shmobile / board-marzen.c
bloba7d1010505bf9ff9246df09eca4a9706f2cf3a3f
1 /*
2 * marzen board support
4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Copyright (C) 2011 Magnus Damm
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/irq.h>
25 #include <linux/platform_device.h>
26 #include <linux/delay.h>
27 #include <linux/io.h>
28 #include <linux/leds.h>
29 #include <linux/dma-mapping.h>
30 #include <linux/pinctrl/machine.h>
31 #include <linux/platform_data/gpio-rcar.h>
32 #include <linux/regulator/fixed.h>
33 #include <linux/regulator/machine.h>
34 #include <linux/smsc911x.h>
35 #include <linux/spi/spi.h>
36 #include <linux/spi/sh_hspi.h>
37 #include <linux/mmc/host.h>
38 #include <linux/mmc/sh_mobile_sdhi.h>
39 #include <linux/mfd/tmio.h>
40 #include <mach/hardware.h>
41 #include <mach/r8a7779.h>
42 #include <mach/common.h>
43 #include <mach/irqs.h>
44 #include <asm/mach-types.h>
45 #include <asm/mach/arch.h>
46 #include <asm/traps.h>
48 /* Fixed 3.3V regulator to be used by SDHI0 */
49 static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
50 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
51 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
54 /* Dummy supplies, where voltage doesn't matter */
55 static struct regulator_consumer_supply dummy_supplies[] = {
56 REGULATOR_SUPPLY("vddvario", "smsc911x"),
57 REGULATOR_SUPPLY("vdd33a", "smsc911x"),
60 static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
62 /* SMSC LAN89218 */
63 static struct resource smsc911x_resources[] = {
64 [0] = {
65 .start = 0x18000000, /* ExCS0 */
66 .end = 0x180000ff, /* A1->A7 */
67 .flags = IORESOURCE_MEM,
69 [1] = {
70 .start = irq_pin(1), /* IRQ 1 */
71 .flags = IORESOURCE_IRQ,
75 static struct smsc911x_platform_config smsc911x_platdata = {
76 .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
77 .phy_interface = PHY_INTERFACE_MODE_MII,
78 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
79 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
82 static struct platform_device eth_device = {
83 .name = "smsc911x",
84 .id = -1,
85 .dev = {
86 .platform_data = &smsc911x_platdata,
88 .resource = smsc911x_resources,
89 .num_resources = ARRAY_SIZE(smsc911x_resources),
92 static struct resource sdhi0_resources[] = {
93 [0] = {
94 .name = "sdhi0",
95 .start = 0xffe4c000,
96 .end = 0xffe4c0ff,
97 .flags = IORESOURCE_MEM,
99 [1] = {
100 .start = gic_iid(0x88),
101 .flags = IORESOURCE_IRQ,
105 static struct sh_mobile_sdhi_info sdhi0_platform_data = {
106 .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
107 .tmio_caps = MMC_CAP_SD_HIGHSPEED,
110 static struct platform_device sdhi0_device = {
111 .name = "sh_mobile_sdhi",
112 .num_resources = ARRAY_SIZE(sdhi0_resources),
113 .resource = sdhi0_resources,
114 .id = 0,
115 .dev = {
116 .platform_data = &sdhi0_platform_data,
120 /* Thermal */
121 static struct resource thermal_resources[] = {
122 [0] = {
123 .start = 0xFFC48000,
124 .end = 0xFFC48038 - 1,
125 .flags = IORESOURCE_MEM,
129 static struct platform_device thermal_device = {
130 .name = "rcar_thermal",
131 .resource = thermal_resources,
132 .num_resources = ARRAY_SIZE(thermal_resources),
135 /* HSPI */
136 static struct resource hspi_resources[] = {
137 [0] = {
138 .start = 0xFFFC7000,
139 .end = 0xFFFC7018 - 1,
140 .flags = IORESOURCE_MEM,
144 static struct platform_device hspi_device = {
145 .name = "sh-hspi",
146 .id = 0,
147 .resource = hspi_resources,
148 .num_resources = ARRAY_SIZE(hspi_resources),
151 /* LEDS */
152 static struct gpio_led marzen_leds[] = {
154 .name = "led2",
155 .gpio = RCAR_GP_PIN(4, 29),
156 .default_state = LEDS_GPIO_DEFSTATE_ON,
157 }, {
158 .name = "led3",
159 .gpio = RCAR_GP_PIN(4, 30),
160 .default_state = LEDS_GPIO_DEFSTATE_ON,
161 }, {
162 .name = "led4",
163 .gpio = RCAR_GP_PIN(4, 31),
164 .default_state = LEDS_GPIO_DEFSTATE_ON,
168 static struct gpio_led_platform_data marzen_leds_pdata = {
169 .leds = marzen_leds,
170 .num_leds = ARRAY_SIZE(marzen_leds),
173 static struct platform_device leds_device = {
174 .name = "leds-gpio",
175 .id = 0,
176 .dev = {
177 .platform_data = &marzen_leds_pdata,
181 static struct platform_device *marzen_devices[] __initdata = {
182 &eth_device,
183 &sdhi0_device,
184 &thermal_device,
185 &hspi_device,
186 &leds_device,
189 static const struct pinctrl_map marzen_pinctrl_map[] = {
190 /* HSPI0 */
191 PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
192 "hspi0", "hspi0"),
193 /* SCIF2 (CN18: DEBUG0) */
194 PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
195 "scif2_data_c", "scif2"),
196 /* SCIF4 (CN19: DEBUG1) */
197 PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
198 "scif4_data", "scif4"),
199 /* SDHI0 */
200 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
201 "sdhi0_data4", "sdhi0"),
202 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
203 "sdhi0_ctrl", "sdhi0"),
204 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
205 "sdhi0_cd", "sdhi0"),
206 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
207 "sdhi0_wp", "sdhi0"),
208 /* SMSC */
209 PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
210 "intc_irq1_b", "intc"),
211 PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
212 "lbsc_ex_cs0", "lbsc"),
213 /* USB0 */
214 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
215 "usb0", "usb0"),
216 /* USB1 */
217 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
218 "usb1", "usb1"),
219 /* USB2 */
220 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
221 "usb2", "usb2"),
224 static void __init marzen_init(void)
226 regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
227 ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
228 regulator_register_fixed(1, dummy_supplies,
229 ARRAY_SIZE(dummy_supplies));
231 pinctrl_register_mappings(marzen_pinctrl_map,
232 ARRAY_SIZE(marzen_pinctrl_map));
233 r8a7779_pinmux_init();
234 r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
236 r8a7779_add_standard_devices();
237 r8a7779_add_usb_phy_device(&usb_phy_platform_data);
238 platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
241 MACHINE_START(MARZEN, "marzen")
242 .smp = smp_ops(r8a7779_smp_ops),
243 .map_io = r8a7779_map_io,
244 .init_early = r8a7779_add_early_devices,
245 .nr_irqs = NR_IRQS_LEGACY,
246 .init_irq = r8a7779_init_irq,
247 .init_machine = marzen_init,
248 .init_late = r8a7779_init_late,
249 .init_time = r8a7779_earlytimer_init,
250 MACHINE_END