2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP environment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
33 #include <linux/init.h>
34 #include <asm/uaccess.h>
35 #include <linux/slab.h>
36 #include <linux/list.h>
37 #include <linux/vmalloc.h>
38 #include <linux/elf.h>
39 #include <linux/seq_file.h>
40 #include <linux/syscalls.h>
41 #include <linux/moduleloader.h>
42 #include <linux/interrupt.h>
43 #include <linux/poll.h>
44 #include <linux/bootmem.h>
45 #include <asm/mipsregs.h>
46 #include <asm/mipsmtregs.h>
47 #include <asm/cacheflush.h>
48 #include <linux/atomic.h>
50 #include <asm/mips_mt.h>
51 #include <asm/processor.h>
54 typedef void *vpe_handle
;
56 #ifndef ARCH_SHF_SMALL
57 #define ARCH_SHF_SMALL 0
60 /* If this is set, the section belongs in the init part of the module */
61 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
64 * The number of TCs and VPEs physically available on the core
66 static int hw_tcs
, hw_vpes
;
67 static char module_name
[] = "vpe";
69 static const int minor
= 1; /* fixed for now */
71 /* grab the likely amount of memory we will need. */
72 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
73 #define P_SIZE (2 * 1024 * 1024)
75 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
76 #define P_SIZE (256 * 1024)
79 extern unsigned long physical_memsize
;
82 #define VPE_PATH_MAX 256
100 /* (device) minor associated with this vpe */
103 /* elfloader stuff */
108 unsigned int uid
, gid
;
109 char cwd
[VPE_PATH_MAX
];
111 unsigned long __start
;
113 /* tc's associated with this vpe */
116 /* The list of vpe's */
117 struct list_head list
;
119 /* shared symbol address */
122 /* the list of who wants to know when something major happens */
123 struct list_head notify
;
132 struct vpe
*pvpe
; /* parent VPE */
133 struct list_head tc
; /* The list of TC's with this VPE */
134 struct list_head list
; /* The global list of tc's */
138 spinlock_t vpe_list_lock
;
139 struct list_head vpe_list
; /* Virtual processing elements */
140 spinlock_t tc_list_lock
;
141 struct list_head tc_list
; /* Thread contexts */
143 .vpe_list_lock
= __SPIN_LOCK_UNLOCKED(vpe_list_lock
),
144 .vpe_list
= LIST_HEAD_INIT(vpecontrol
.vpe_list
),
145 .tc_list_lock
= __SPIN_LOCK_UNLOCKED(tc_list_lock
),
146 .tc_list
= LIST_HEAD_INIT(vpecontrol
.tc_list
)
149 static void release_progmem(void *ptr
);
151 /* get the vpe associated with this minor */
152 static struct vpe
*get_vpe(int minor
)
160 spin_lock(&vpecontrol
.vpe_list_lock
);
161 list_for_each_entry(v
, &vpecontrol
.vpe_list
, list
) {
162 if (v
->minor
== minor
) {
167 spin_unlock(&vpecontrol
.vpe_list_lock
);
172 /* get the vpe associated with this minor */
173 static struct tc
*get_tc(int index
)
178 spin_lock(&vpecontrol
.tc_list_lock
);
179 list_for_each_entry(t
, &vpecontrol
.tc_list
, list
) {
180 if (t
->index
== index
) {
185 spin_unlock(&vpecontrol
.tc_list_lock
);
190 /* allocate a vpe and associate it with this minor (or index) */
191 static struct vpe
*alloc_vpe(int minor
)
195 if ((v
= kzalloc(sizeof(struct vpe
), GFP_KERNEL
)) == NULL
)
198 INIT_LIST_HEAD(&v
->tc
);
199 spin_lock(&vpecontrol
.vpe_list_lock
);
200 list_add_tail(&v
->list
, &vpecontrol
.vpe_list
);
201 spin_unlock(&vpecontrol
.vpe_list_lock
);
203 INIT_LIST_HEAD(&v
->notify
);
209 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
210 static struct tc
*alloc_tc(int index
)
214 if ((tc
= kzalloc(sizeof(struct tc
), GFP_KERNEL
)) == NULL
)
217 INIT_LIST_HEAD(&tc
->tc
);
220 spin_lock(&vpecontrol
.tc_list_lock
);
221 list_add_tail(&tc
->list
, &vpecontrol
.tc_list
);
222 spin_unlock(&vpecontrol
.tc_list_lock
);
228 /* clean up and free everything */
229 static void release_vpe(struct vpe
*v
)
237 static void __maybe_unused
dump_mtregs(void)
241 val
= read_c0_config3();
242 printk("config3 0x%lx MT %ld\n", val
,
243 (val
& CONFIG3_MT
) >> CONFIG3_MT_SHIFT
);
245 val
= read_c0_mvpcontrol();
246 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val
,
247 (val
& MVPCONTROL_STLB
) >> MVPCONTROL_STLB_SHIFT
,
248 (val
& MVPCONTROL_VPC
) >> MVPCONTROL_VPC_SHIFT
,
249 (val
& MVPCONTROL_EVP
));
251 val
= read_c0_mvpconf0();
252 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val
,
253 (val
& MVPCONF0_PVPE
) >> MVPCONF0_PVPE_SHIFT
,
254 val
& MVPCONF0_PTC
, (val
& MVPCONF0_M
) >> MVPCONF0_M_SHIFT
);
257 /* Find some VPE program space */
258 static void *alloc_progmem(unsigned long len
)
262 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
264 * This means you must tell Linux to use less memory than you
265 * physically have, for example by passing a mem= boot argument.
267 addr
= pfn_to_kaddr(max_low_pfn
);
268 memset(addr
, 0, len
);
270 /* simple grab some mem for now */
271 addr
= kzalloc(len
, GFP_KERNEL
);
277 static void release_progmem(void *ptr
)
279 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
284 /* Update size with this section: return offset. */
285 static long get_offset(unsigned long *size
, Elf_Shdr
* sechdr
)
289 ret
= ALIGN(*size
, sechdr
->sh_addralign
? : 1);
290 *size
= ret
+ sechdr
->sh_size
;
294 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
295 might -- code, read-only data, read-write data, small data. Tally
296 sizes, and place the offsets into sh_entsize fields: high bit means it
298 static void layout_sections(struct module
*mod
, const Elf_Ehdr
* hdr
,
299 Elf_Shdr
* sechdrs
, const char *secstrings
)
301 static unsigned long const masks
[][2] = {
302 /* NOTE: all executable code must be the first section
303 * in this array; otherwise modify the text_size
304 * finder in the two loops below */
305 {SHF_EXECINSTR
| SHF_ALLOC
, ARCH_SHF_SMALL
},
306 {SHF_ALLOC
, SHF_WRITE
| ARCH_SHF_SMALL
},
307 {SHF_WRITE
| SHF_ALLOC
, ARCH_SHF_SMALL
},
308 {ARCH_SHF_SMALL
| SHF_ALLOC
, 0}
312 for (i
= 0; i
< hdr
->e_shnum
; i
++)
313 sechdrs
[i
].sh_entsize
= ~0UL;
315 for (m
= 0; m
< ARRAY_SIZE(masks
); ++m
) {
316 for (i
= 0; i
< hdr
->e_shnum
; ++i
) {
317 Elf_Shdr
*s
= &sechdrs
[i
];
319 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
320 if ((s
->sh_flags
& masks
[m
][0]) != masks
[m
][0]
321 || (s
->sh_flags
& masks
[m
][1])
322 || s
->sh_entsize
!= ~0UL)
325 get_offset((unsigned long *)&mod
->core_size
, s
);
329 mod
->core_text_size
= mod
->core_size
;
335 /* from module-elf32.c, but subverted a little */
338 struct mips_hi16
*next
;
343 static struct mips_hi16
*mips_hi16_list
;
344 static unsigned int gp_offs
, gp_addr
;
346 static int apply_r_mips_none(struct module
*me
, uint32_t *location
,
352 static int apply_r_mips_gprel16(struct module
*me
, uint32_t *location
,
357 if( !(*location
& 0xffff) ) {
358 rel
= (int)v
- gp_addr
;
361 /* .sbss + gp(relative) + offset */
363 rel
= (int)(short)((int)v
+ gp_offs
+
364 (int)(short)(*location
& 0xffff) - gp_addr
);
367 if( (rel
> 32768) || (rel
< -32768) ) {
368 printk(KERN_DEBUG
"VPE loader: apply_r_mips_gprel16: "
369 "relative address 0x%x out of range of gp register\n",
374 *location
= (*location
& 0xffff0000) | (rel
& 0xffff);
379 static int apply_r_mips_pc16(struct module
*me
, uint32_t *location
,
383 rel
= (((unsigned int)v
- (unsigned int)location
));
384 rel
>>= 2; // because the offset is in _instructions_ not bytes.
385 rel
-= 1; // and one instruction less due to the branch delay slot.
387 if( (rel
> 32768) || (rel
< -32768) ) {
388 printk(KERN_DEBUG
"VPE loader: "
389 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel
);
393 *location
= (*location
& 0xffff0000) | (rel
& 0xffff);
398 static int apply_r_mips_32(struct module
*me
, uint32_t *location
,
406 static int apply_r_mips_26(struct module
*me
, uint32_t *location
,
410 printk(KERN_DEBUG
"VPE loader: apply_r_mips_26 "
411 " unaligned relocation\n");
416 * Not desperately convinced this is a good check of an overflow condition
417 * anyway. But it gets in the way of handling undefined weak symbols which
418 * we want to set to zero.
419 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
421 * "module %s: relocation overflow\n",
427 *location
= (*location
& ~0x03ffffff) |
428 ((*location
+ (v
>> 2)) & 0x03ffffff);
432 static int apply_r_mips_hi16(struct module
*me
, uint32_t *location
,
438 * We cannot relocate this one now because we don't know the value of
439 * the carry we need to add. Save the information, and let LO16 do the
442 n
= kmalloc(sizeof *n
, GFP_KERNEL
);
448 n
->next
= mips_hi16_list
;
454 static int apply_r_mips_lo16(struct module
*me
, uint32_t *location
,
457 unsigned long insnlo
= *location
;
458 Elf32_Addr val
, vallo
;
459 struct mips_hi16
*l
, *next
;
461 /* Sign extend the addend we extract from the lo insn. */
462 vallo
= ((insnlo
& 0xffff) ^ 0x8000) - 0x8000;
464 if (mips_hi16_list
!= NULL
) {
471 * The value for the HI16 had best be the same.
474 printk(KERN_DEBUG
"VPE loader: "
475 "apply_r_mips_lo16/hi16: \t"
476 "inconsistent value information\n");
481 * Do the HI16 relocation. Note that we actually don't
482 * need to know anything about the LO16 itself, except
483 * where to find the low 16 bits of the addend needed
487 val
= ((insn
& 0xffff) << 16) + vallo
;
491 * Account for the sign extension that will happen in
494 val
= ((val
>> 16) + ((val
& 0x8000) != 0)) & 0xffff;
496 insn
= (insn
& ~0xffff) | val
;
504 mips_hi16_list
= NULL
;
508 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
511 insnlo
= (insnlo
& ~0xffff) | (val
& 0xffff);
522 mips_hi16_list
= NULL
;
527 static int (*reloc_handlers
[]) (struct module
*me
, uint32_t *location
,
529 [R_MIPS_NONE
] = apply_r_mips_none
,
530 [R_MIPS_32
] = apply_r_mips_32
,
531 [R_MIPS_26
] = apply_r_mips_26
,
532 [R_MIPS_HI16
] = apply_r_mips_hi16
,
533 [R_MIPS_LO16
] = apply_r_mips_lo16
,
534 [R_MIPS_GPREL16
] = apply_r_mips_gprel16
,
535 [R_MIPS_PC16
] = apply_r_mips_pc16
538 static char *rstrs
[] = {
539 [R_MIPS_NONE
] = "MIPS_NONE",
540 [R_MIPS_32
] = "MIPS_32",
541 [R_MIPS_26
] = "MIPS_26",
542 [R_MIPS_HI16
] = "MIPS_HI16",
543 [R_MIPS_LO16
] = "MIPS_LO16",
544 [R_MIPS_GPREL16
] = "MIPS_GPREL16",
545 [R_MIPS_PC16
] = "MIPS_PC16"
548 static int apply_relocations(Elf32_Shdr
*sechdrs
,
550 unsigned int symindex
,
554 Elf32_Rel
*rel
= (void *) sechdrs
[relsec
].sh_addr
;
561 for (i
= 0; i
< sechdrs
[relsec
].sh_size
/ sizeof(*rel
); i
++) {
562 Elf32_Word r_info
= rel
[i
].r_info
;
564 /* This is where to make the change */
565 location
= (void *)sechdrs
[sechdrs
[relsec
].sh_info
].sh_addr
567 /* This is the symbol it is referring to */
568 sym
= (Elf32_Sym
*)sechdrs
[symindex
].sh_addr
569 + ELF32_R_SYM(r_info
);
571 if (!sym
->st_value
) {
572 printk(KERN_DEBUG
"%s: undefined weak symbol %s\n",
573 me
->name
, strtab
+ sym
->st_name
);
574 /* just print the warning, dont barf */
579 res
= reloc_handlers
[ELF32_R_TYPE(r_info
)](me
, location
, v
);
581 char *r
= rstrs
[ELF32_R_TYPE(r_info
)];
582 printk(KERN_WARNING
"VPE loader: .text+0x%x "
583 "relocation type %s for symbol \"%s\" failed\n",
584 rel
[i
].r_offset
, r
? r
: "UNKNOWN",
585 strtab
+ sym
->st_name
);
593 static inline void save_gp_address(unsigned int secbase
, unsigned int rel
)
595 gp_addr
= secbase
+ rel
;
596 gp_offs
= gp_addr
- (secbase
& 0xffff0000);
598 /* end module-elf32.c */
602 /* Change all symbols so that sh_value encodes the pointer directly. */
603 static void simplify_symbols(Elf_Shdr
* sechdrs
,
604 unsigned int symindex
,
606 const char *secstrings
,
607 unsigned int nsecs
, struct module
*mod
)
609 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
610 unsigned long secbase
, bssbase
= 0;
611 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
614 /* find the .bss section for COMMON symbols */
615 for (i
= 0; i
< nsecs
; i
++) {
616 if (strncmp(secstrings
+ sechdrs
[i
].sh_name
, ".bss", 4) == 0) {
617 bssbase
= sechdrs
[i
].sh_addr
;
622 for (i
= 1; i
< n
; i
++) {
623 switch (sym
[i
].st_shndx
) {
625 /* Allocate space for the symbol in the .bss section.
626 st_value is currently size.
627 We want it to have the address of the symbol. */
629 size
= sym
[i
].st_value
;
630 sym
[i
].st_value
= bssbase
;
636 /* Don't need to do anything */
643 case SHN_MIPS_SCOMMON
:
644 printk(KERN_DEBUG
"simplify_symbols: ignoring SHN_MIPS_SCOMMON "
645 "symbol <%s> st_shndx %d\n", strtab
+ sym
[i
].st_name
,
651 secbase
= sechdrs
[sym
[i
].st_shndx
].sh_addr
;
653 if (strncmp(strtab
+ sym
[i
].st_name
, "_gp", 3) == 0) {
654 save_gp_address(secbase
, sym
[i
].st_value
);
657 sym
[i
].st_value
+= secbase
;
663 #ifdef DEBUG_ELFLOADER
664 static void dump_elfsymbols(Elf_Shdr
* sechdrs
, unsigned int symindex
,
665 const char *strtab
, struct module
*mod
)
667 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
668 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
670 printk(KERN_DEBUG
"dump_elfsymbols: n %d\n", n
);
671 for (i
= 1; i
< n
; i
++) {
672 printk(KERN_DEBUG
" i %d name <%s> 0x%x\n", i
,
673 strtab
+ sym
[i
].st_name
, sym
[i
].st_value
);
678 /* We are prepared so configure and start the VPE... */
679 static int vpe_run(struct vpe
* v
)
681 unsigned long flags
, val
, dmt_flag
;
682 struct vpe_notifications
*n
;
683 unsigned int vpeflags
;
686 /* check we are the Master VPE */
687 local_irq_save(flags
);
688 val
= read_c0_vpeconf0();
689 if (!(val
& VPECONF0_MVP
)) {
691 "VPE loader: only Master VPE's are allowed to configure MT\n");
692 local_irq_restore(flags
);
700 if (list_empty(&v
->tc
)) {
703 local_irq_restore(flags
);
706 "VPE loader: No TC's associated with VPE %d\n",
712 t
= list_first_entry(&v
->tc
, struct tc
, tc
);
714 /* Put MVPE's into 'configuration state' */
715 set_c0_mvpcontrol(MVPCONTROL_VPC
);
719 /* should check it is halted, and not activated */
720 if ((read_tc_c0_tcstatus() & TCSTATUS_A
) || !(read_tc_c0_tchalt() & TCHALT_H
)) {
723 local_irq_restore(flags
);
725 printk(KERN_WARNING
"VPE loader: TC %d is already active!\n",
731 /* Write the address we want it to start running from in the TCPC register. */
732 write_tc_c0_tcrestart((unsigned long)v
->__start
);
733 write_tc_c0_tccontext((unsigned long)0);
736 * Mark the TC as activated, not interrupt exempt and not dynamically
739 val
= read_tc_c0_tcstatus();
740 val
= (val
& ~(TCSTATUS_DA
| TCSTATUS_IXMT
)) | TCSTATUS_A
;
741 write_tc_c0_tcstatus(val
);
743 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H
);
746 * The sde-kit passes 'memsize' to __start in $a3, so set something
747 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
748 * DFLT_HEAP_SIZE when you compile your program
751 mttgpr(7, physical_memsize
);
755 * bind the TC to VPE 1 as late as possible so we only have the final
756 * VPE registers to set up, and so an EJTAG probe can trigger on it
758 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE
) | 1);
760 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA
));
762 back_to_back_c0_hazard();
764 /* Set up the XTC bit in vpeconf0 to point at our tc */
765 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC
))
766 | (t
->index
<< VPECONF0_XTC_SHIFT
));
768 back_to_back_c0_hazard();
770 /* enable this VPE */
771 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA
);
773 /* clear out any left overs from a previous program */
774 write_vpe_c0_status(0);
775 write_vpe_c0_cause(0);
777 /* take system out of configuration state */
778 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
781 * SMTC/SMVP kernels manage VPE enable independently,
782 * but uniprocessor kernels need to turn it on, even
783 * if that wasn't the pre-dvpe() state.
791 local_irq_restore(flags
);
793 list_for_each_entry(n
, &v
->notify
, list
)
799 static int find_vpe_symbols(struct vpe
* v
, Elf_Shdr
* sechdrs
,
800 unsigned int symindex
, const char *strtab
,
803 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
804 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
806 for (i
= 1; i
< n
; i
++) {
807 if (strcmp(strtab
+ sym
[i
].st_name
, "__start") == 0) {
808 v
->__start
= sym
[i
].st_value
;
811 if (strcmp(strtab
+ sym
[i
].st_name
, "vpe_shared") == 0) {
812 v
->shared_ptr
= (void *)sym
[i
].st_value
;
816 if ( (v
->__start
== 0) || (v
->shared_ptr
== NULL
))
823 * Allocates a VPE with some program code space(the load address), copies the
824 * contents of the program (p)buffer performing relocatations/etc, free's it
827 static int vpe_elfload(struct vpe
* v
)
832 char *secstrings
, *strtab
= NULL
;
833 unsigned int len
, i
, symindex
= 0, strindex
= 0, relocate
= 0;
834 struct module mod
; // so we can re-use the relocations code
836 memset(&mod
, 0, sizeof(struct module
));
837 strcpy(mod
.name
, "VPE loader");
839 hdr
= (Elf_Ehdr
*) v
->pbuffer
;
842 /* Sanity checks against insmoding binaries or wrong arch,
844 if (memcmp(hdr
->e_ident
, ELFMAG
, SELFMAG
) != 0
845 || (hdr
->e_type
!= ET_REL
&& hdr
->e_type
!= ET_EXEC
)
846 || !elf_check_arch(hdr
)
847 || hdr
->e_shentsize
!= sizeof(*sechdrs
)) {
849 "VPE loader: program wrong arch or weird elf version\n");
854 if (hdr
->e_type
== ET_REL
)
857 if (len
< hdr
->e_shoff
+ hdr
->e_shnum
* sizeof(Elf_Shdr
)) {
858 printk(KERN_ERR
"VPE loader: program length %u truncated\n",
864 /* Convenience variables */
865 sechdrs
= (void *)hdr
+ hdr
->e_shoff
;
866 secstrings
= (void *)hdr
+ sechdrs
[hdr
->e_shstrndx
].sh_offset
;
867 sechdrs
[0].sh_addr
= 0;
869 /* And these should exist, but gcc whinges if we don't init them */
870 symindex
= strindex
= 0;
873 for (i
= 1; i
< hdr
->e_shnum
; i
++) {
874 if (sechdrs
[i
].sh_type
!= SHT_NOBITS
875 && len
< sechdrs
[i
].sh_offset
+ sechdrs
[i
].sh_size
) {
876 printk(KERN_ERR
"VPE program length %u truncated\n",
881 /* Mark all sections sh_addr with their address in the
883 sechdrs
[i
].sh_addr
= (size_t) hdr
+ sechdrs
[i
].sh_offset
;
885 /* Internal symbols and strings. */
886 if (sechdrs
[i
].sh_type
== SHT_SYMTAB
) {
888 strindex
= sechdrs
[i
].sh_link
;
889 strtab
= (char *)hdr
+ sechdrs
[strindex
].sh_offset
;
892 layout_sections(&mod
, hdr
, sechdrs
, secstrings
);
895 v
->load_addr
= alloc_progmem(mod
.core_size
);
899 pr_info("VPE loader: loading to %p\n", v
->load_addr
);
902 for (i
= 0; i
< hdr
->e_shnum
; i
++) {
905 if (!(sechdrs
[i
].sh_flags
& SHF_ALLOC
))
908 dest
= v
->load_addr
+ sechdrs
[i
].sh_entsize
;
910 if (sechdrs
[i
].sh_type
!= SHT_NOBITS
)
911 memcpy(dest
, (void *)sechdrs
[i
].sh_addr
,
913 /* Update sh_addr to point to copy in image. */
914 sechdrs
[i
].sh_addr
= (unsigned long)dest
;
916 printk(KERN_DEBUG
" section sh_name %s sh_addr 0x%x\n",
917 secstrings
+ sechdrs
[i
].sh_name
, sechdrs
[i
].sh_addr
);
920 /* Fix up syms, so that st_value is a pointer to location. */
921 simplify_symbols(sechdrs
, symindex
, strtab
, secstrings
,
924 /* Now do relocations. */
925 for (i
= 1; i
< hdr
->e_shnum
; i
++) {
926 const char *strtab
= (char *)sechdrs
[strindex
].sh_addr
;
927 unsigned int info
= sechdrs
[i
].sh_info
;
929 /* Not a valid relocation section? */
930 if (info
>= hdr
->e_shnum
)
933 /* Don't bother with non-allocated sections */
934 if (!(sechdrs
[info
].sh_flags
& SHF_ALLOC
))
937 if (sechdrs
[i
].sh_type
== SHT_REL
)
938 err
= apply_relocations(sechdrs
, strtab
, symindex
, i
,
940 else if (sechdrs
[i
].sh_type
== SHT_RELA
)
941 err
= apply_relocate_add(sechdrs
, strtab
, symindex
, i
,
948 struct elf_phdr
*phdr
= (struct elf_phdr
*) ((char *)hdr
+ hdr
->e_phoff
);
950 for (i
= 0; i
< hdr
->e_phnum
; i
++) {
951 if (phdr
->p_type
== PT_LOAD
) {
952 memcpy((void *)phdr
->p_paddr
,
953 (char *)hdr
+ phdr
->p_offset
,
955 memset((void *)phdr
->p_paddr
+ phdr
->p_filesz
,
956 0, phdr
->p_memsz
- phdr
->p_filesz
);
961 for (i
= 0; i
< hdr
->e_shnum
; i
++) {
962 /* Internal symbols and strings. */
963 if (sechdrs
[i
].sh_type
== SHT_SYMTAB
) {
965 strindex
= sechdrs
[i
].sh_link
;
966 strtab
= (char *)hdr
+ sechdrs
[strindex
].sh_offset
;
968 /* mark the symtab's address for when we try to find the
970 sechdrs
[i
].sh_addr
= (size_t) hdr
+ sechdrs
[i
].sh_offset
;
975 /* make sure it's physically written out */
976 flush_icache_range((unsigned long)v
->load_addr
,
977 (unsigned long)v
->load_addr
+ v
->len
);
979 if ((find_vpe_symbols(v
, sechdrs
, symindex
, strtab
, &mod
)) < 0) {
980 if (v
->__start
== 0) {
981 printk(KERN_WARNING
"VPE loader: program does not contain "
982 "a __start symbol\n");
986 if (v
->shared_ptr
== NULL
)
987 printk(KERN_WARNING
"VPE loader: "
988 "program does not contain vpe_shared symbol.\n"
989 " Unable to use AMVP (AP/SP) facilities.\n");
992 printk(" elf loaded\n");
996 static void cleanup_tc(struct tc
*tc
)
999 unsigned int mtflags
, vpflags
;
1002 local_irq_save(flags
);
1005 /* Put MVPE's into 'configuration state' */
1006 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1009 tmp
= read_tc_c0_tcstatus();
1011 /* mark not allocated and not dynamically allocatable */
1012 tmp
&= ~(TCSTATUS_A
| TCSTATUS_DA
);
1013 tmp
|= TCSTATUS_IXMT
; /* interrupt exempt */
1014 write_tc_c0_tcstatus(tmp
);
1016 write_tc_c0_tchalt(TCHALT_H
);
1019 /* bind it to anything other than VPE1 */
1020 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1022 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1025 local_irq_restore(flags
);
1028 static int getcwd(char *buff
, int size
)
1030 mm_segment_t old_fs
;
1036 ret
= sys_getcwd(buff
, size
);
1043 /* checks VPE is unused and gets ready to load program */
1044 static int vpe_open(struct inode
*inode
, struct file
*filp
)
1046 enum vpe_state state
;
1047 struct vpe_notifications
*not;
1051 if (minor
!= iminor(inode
)) {
1052 /* assume only 1 device at the moment. */
1053 pr_warning("VPE loader: only vpe1 is supported\n");
1058 if ((v
= get_vpe(tclimit
)) == NULL
) {
1059 pr_warning("VPE loader: unable to get vpe\n");
1064 state
= xchg(&v
->state
, VPE_STATE_INUSE
);
1065 if (state
!= VPE_STATE_UNUSED
) {
1066 printk(KERN_DEBUG
"VPE loader: tc in use dumping regs\n");
1068 list_for_each_entry(not, &v
->notify
, list
) {
1072 release_progmem(v
->load_addr
);
1073 cleanup_tc(get_tc(tclimit
));
1076 /* this of-course trashes what was there before... */
1077 v
->pbuffer
= vmalloc(P_SIZE
);
1079 pr_warning("VPE loader: unable to allocate memory\n");
1083 v
->load_addr
= NULL
;
1086 v
->uid
= filp
->f_cred
->fsuid
;
1087 v
->gid
= filp
->f_cred
->fsgid
;
1090 ret
= getcwd(v
->cwd
, VPE_PATH_MAX
);
1092 printk(KERN_WARNING
"VPE loader: open, getcwd returned %d\n", ret
);
1094 v
->shared_ptr
= NULL
;
1100 static int vpe_release(struct inode
*inode
, struct file
*filp
)
1106 v
= get_vpe(tclimit
);
1110 hdr
= (Elf_Ehdr
*) v
->pbuffer
;
1111 if (memcmp(hdr
->e_ident
, ELFMAG
, SELFMAG
) == 0) {
1112 if (vpe_elfload(v
) >= 0) {
1115 printk(KERN_WARNING
"VPE loader: ELF load failed.\n");
1119 printk(KERN_WARNING
"VPE loader: only elf files are supported\n");
1123 /* It's good to be able to run the SP and if it chokes have a look at
1124 the /dev/rt?. But if we reset the pointer to the shared struct we
1125 lose what has happened. So perhaps if garbage is sent to the vpe
1126 device, use it as a trigger for the reset. Hopefully a nice
1127 executable will be along shortly. */
1129 v
->shared_ptr
= NULL
;
1137 static ssize_t
vpe_write(struct file
*file
, const char __user
* buffer
,
1138 size_t count
, loff_t
* ppos
)
1143 if (iminor(file_inode(file
)) != minor
)
1146 v
= get_vpe(tclimit
);
1150 if ((count
+ v
->len
) > v
->plen
) {
1152 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1156 count
-= copy_from_user(v
->pbuffer
+ v
->len
, buffer
, count
);
1164 static const struct file_operations vpe_fops
= {
1165 .owner
= THIS_MODULE
,
1167 .release
= vpe_release
,
1169 .llseek
= noop_llseek
,
1172 /* module wrapper entry points */
1174 vpe_handle
vpe_alloc(void)
1180 for (i
= 1; i
< MAX_VPES
; i
++) {
1181 if ((v
= get_vpe(i
)) != NULL
) {
1182 v
->state
= VPE_STATE_INUSE
;
1189 EXPORT_SYMBOL(vpe_alloc
);
1191 /* start running from here */
1192 int vpe_start(vpe_handle vpe
, unsigned long start
)
1194 struct vpe
*v
= vpe
;
1200 EXPORT_SYMBOL(vpe_start
);
1202 /* halt it for now */
1203 int vpe_stop(vpe_handle vpe
)
1205 struct vpe
*v
= vpe
;
1207 unsigned int evpe_flags
;
1209 evpe_flags
= dvpe();
1211 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) != NULL
) {
1214 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA
);
1222 EXPORT_SYMBOL(vpe_stop
);
1224 /* I've done with it thank you */
1225 int vpe_free(vpe_handle vpe
)
1227 struct vpe
*v
= vpe
;
1229 unsigned int evpe_flags
;
1231 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) == NULL
) {
1235 evpe_flags
= dvpe();
1237 /* Put MVPE's into 'configuration state' */
1238 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1241 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA
);
1244 write_tc_c0_tchalt(TCHALT_H
);
1247 /* mark the TC unallocated */
1248 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A
);
1250 v
->state
= VPE_STATE_UNUSED
;
1252 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1258 EXPORT_SYMBOL(vpe_free
);
1260 void *vpe_get_shared(int index
)
1264 if ((v
= get_vpe(index
)) == NULL
)
1267 return v
->shared_ptr
;
1270 EXPORT_SYMBOL(vpe_get_shared
);
1272 int vpe_getuid(int index
)
1276 if ((v
= get_vpe(index
)) == NULL
)
1282 EXPORT_SYMBOL(vpe_getuid
);
1284 int vpe_getgid(int index
)
1288 if ((v
= get_vpe(index
)) == NULL
)
1294 EXPORT_SYMBOL(vpe_getgid
);
1296 int vpe_notify(int index
, struct vpe_notifications
*notify
)
1300 if ((v
= get_vpe(index
)) == NULL
)
1303 list_add(¬ify
->list
, &v
->notify
);
1307 EXPORT_SYMBOL(vpe_notify
);
1309 char *vpe_getcwd(int index
)
1313 if ((v
= get_vpe(index
)) == NULL
)
1319 EXPORT_SYMBOL(vpe_getcwd
);
1321 static ssize_t
store_kill(struct device
*dev
, struct device_attribute
*attr
,
1322 const char *buf
, size_t len
)
1324 struct vpe
*vpe
= get_vpe(tclimit
);
1325 struct vpe_notifications
*not;
1327 list_for_each_entry(not, &vpe
->notify
, list
) {
1331 release_progmem(vpe
->load_addr
);
1332 cleanup_tc(get_tc(tclimit
));
1339 static ssize_t
show_ntcs(struct device
*cd
, struct device_attribute
*attr
,
1342 struct vpe
*vpe
= get_vpe(tclimit
);
1344 return sprintf(buf
, "%d\n", vpe
->ntcs
);
1347 static ssize_t
store_ntcs(struct device
*dev
, struct device_attribute
*attr
,
1348 const char *buf
, size_t len
)
1350 struct vpe
*vpe
= get_vpe(tclimit
);
1354 new = simple_strtoul(buf
, &endp
, 0);
1358 if (new == 0 || new > (hw_tcs
- tclimit
))
1369 static struct device_attribute vpe_class_attributes
[] = {
1370 __ATTR(kill
, S_IWUSR
, NULL
, store_kill
),
1371 __ATTR(ntcs
, S_IRUGO
| S_IWUSR
, show_ntcs
, store_ntcs
),
1375 static void vpe_device_release(struct device
*cd
)
1380 struct class vpe_class
= {
1382 .owner
= THIS_MODULE
,
1383 .dev_release
= vpe_device_release
,
1384 .dev_attrs
= vpe_class_attributes
,
1387 struct device vpe_device
;
1389 static int __init
vpe_module_init(void)
1391 unsigned int mtflags
, vpflags
;
1392 unsigned long flags
, val
;
1393 struct vpe
*v
= NULL
;
1397 if (!cpu_has_mipsmt
) {
1398 printk("VPE loader: not a MIPS MT capable processor\n");
1402 if (vpelimit
== 0) {
1403 printk(KERN_WARNING
"No VPEs reserved for AP/SP, not "
1404 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1405 "kernel argument\n");
1411 printk(KERN_WARNING
"No TCs reserved for AP/SP, not "
1412 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1413 "kernel argument\n");
1418 major
= register_chrdev(0, module_name
, &vpe_fops
);
1420 printk("VPE loader: unable to register character device\n");
1424 err
= class_register(&vpe_class
);
1426 printk(KERN_ERR
"vpe_class registration failed\n");
1430 device_initialize(&vpe_device
);
1431 vpe_device
.class = &vpe_class
,
1432 vpe_device
.parent
= NULL
,
1433 dev_set_name(&vpe_device
, "vpe1");
1434 vpe_device
.devt
= MKDEV(major
, minor
);
1435 err
= device_add(&vpe_device
);
1437 printk(KERN_ERR
"Adding vpe_device failed\n");
1441 local_irq_save(flags
);
1445 /* Put MVPE's into 'configuration state' */
1446 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1448 /* dump_mtregs(); */
1450 val
= read_c0_mvpconf0();
1451 hw_tcs
= (val
& MVPCONF0_PTC
) + 1;
1452 hw_vpes
= ((val
& MVPCONF0_PVPE
) >> MVPCONF0_PVPE_SHIFT
) + 1;
1454 for (tc
= tclimit
; tc
< hw_tcs
; tc
++) {
1456 * Must re-enable multithreading temporarily or in case we
1457 * reschedule send IPIs or similar we might hang.
1459 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1462 local_irq_restore(flags
);
1469 local_irq_save(flags
);
1472 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1478 if ((v
= alloc_vpe(tc
)) == NULL
) {
1479 printk(KERN_WARNING
"VPE: unable to allocate VPE\n");
1484 v
->ntcs
= hw_tcs
- tclimit
;
1486 /* add the tc to the list of this vpe's tc's. */
1487 list_add(&t
->tc
, &v
->tc
);
1489 /* deactivate all but vpe0 */
1490 if (tc
>= tclimit
) {
1491 unsigned long tmp
= read_vpe_c0_vpeconf0();
1493 tmp
&= ~VPECONF0_VPA
;
1496 tmp
|= VPECONF0_MVP
;
1497 write_vpe_c0_vpeconf0(tmp
);
1500 /* disable multi-threading with TC's */
1501 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE
);
1503 if (tc
>= vpelimit
) {
1505 * Set config to be the same as vpe0,
1506 * particularly kseg0 coherency alg
1508 write_vpe_c0_config(read_c0_config());
1513 t
->pvpe
= v
; /* set the parent vpe */
1515 if (tc
>= tclimit
) {
1520 /* Any TC that is bound to VPE0 gets left as is - in case
1521 we are running SMTC on VPE0. A TC that is bound to any
1522 other VPE gets bound to VPE0, ideally I'd like to make
1523 it homeless but it doesn't appear to let me bind a TC
1524 to a non-existent VPE. Which is perfectly reasonable.
1526 The (un)bound state is visible to an EJTAG probe so may
1530 if (((tmp
= read_tc_c0_tcbind()) & TCBIND_CURVPE
)) {
1531 /* tc is bound >vpe0 */
1532 write_tc_c0_tcbind(tmp
& ~TCBIND_CURVPE
);
1534 t
->pvpe
= get_vpe(0); /* set the parent vpe */
1538 write_tc_c0_tchalt(TCHALT_H
);
1541 tmp
= read_tc_c0_tcstatus();
1543 /* mark not activated and not dynamically allocatable */
1544 tmp
&= ~(TCSTATUS_A
| TCSTATUS_DA
);
1545 tmp
|= TCSTATUS_IXMT
; /* interrupt exempt */
1546 write_tc_c0_tcstatus(tmp
);
1551 /* release config state */
1552 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1556 local_irq_restore(flags
);
1561 class_unregister(&vpe_class
);
1563 unregister_chrdev(major
, module_name
);
1569 static void __exit
vpe_module_exit(void)
1573 device_del(&vpe_device
);
1574 unregister_chrdev(major
, module_name
);
1576 /* No locking needed here */
1577 list_for_each_entry_safe(v
, n
, &vpecontrol
.vpe_list
, list
) {
1578 if (v
->state
!= VPE_STATE_UNUSED
)
1583 module_init(vpe_module_init
);
1584 module_exit(vpe_module_exit
);
1585 MODULE_DESCRIPTION("MIPS VPE Loader");
1586 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1587 MODULE_LICENSE("GPL");