arch/mips/sgi-ip27/ip27-irq-pci.c

   1 /*
   2  * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
   3  *
   4  * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
   5  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
   6  * Copyright (C) 1999 - 2001 Kanoj Sarcar
   7  */
   8
   9 #undef DEBUG
  10
  11 #include <linux/init.h>
  12 #include <linux/irq.h>
  13 #include <linux/errno.h>
  14 #include <linux/signal.h>
  15 #include <linux/sched.h>
  16 #include <linux/types.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/ioport.h>
  19 #include <linux/timex.h>
  20 #include <linux/smp.h>
  21 #include <linux/random.h>
  22 #include <linux/kernel.h>
  23 #include <linux/kernel_stat.h>
  24 #include <linux/delay.h>
  25 #include <linux/bitops.h>
  26
  27 #include <asm/bootinfo.h>
  28 #include <asm/io.h>
  29 #include <asm/mipsregs.h>
  30
  31 #include <asm/processor.h>
  32 #include <asm/pci/bridge.h>
  33 #include <asm/sn/addrs.h>
  34 #include <asm/sn/agent.h>
  35 #include <asm/sn/arch.h>
  36 #include <asm/sn/hub.h>
  37 #include <asm/sn/intr.h>
  38
  39 /*
  40  * Linux has a controller-independent x86 interrupt architecture.
  41  * every controller has a 'controller-template', that is used
  42  * by the main code to do the right thing. Each driver-visible
  43  * interrupt source is transparently wired to the appropriate
  44  * controller. Thus drivers need not be aware of the
  45  * interrupt-controller.
  46  *
  47  * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
  48  * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
  49  * (IO-APICs assumed to be messaging to Pentium local-APICs)
  50  *
  51  * the code is designed to be easily extended with new/different
  52  * interrupt controllers, without having to do assembly magic.
  53  */
  54
  55 extern struct bridge_controller *irq_to_bridge[];
  56 extern int irq_to_slot[];
  57
  58 /*
  59  * use these macros to get the encoded nasid and widget id
  60  * from the irq value
  61  */
  62 #define IRQ_TO_BRIDGE(i)                irq_to_bridge[(i)]
  63 #define SLOT_FROM_PCI_IRQ(i)            irq_to_slot[i]
  64
  65 static inline int alloc_level(int cpu, int irq)
  66 {
  67         struct hub_data *hub = hub_data(cpu_to_node(cpu));
  68         struct slice_data *si = cpu_data[cpu].data;
  69         int level;
  70
  71         level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
  72         if (level >= LEVELS_PER_SLICE)
  73                 panic("Cpu %d flooded with devices", cpu);
  74
  75         __set_bit(level, hub->irq_alloc_mask);
  76         si->level_to_irq[level] = irq;
  77
  78         return level;
  79 }
  80
  81 static inline int find_level(cpuid_t *cpunum, int irq)
  82 {
  83         int cpu, i;
  84
  85         for_each_online_cpu(cpu) {
  86                 struct slice_data *si = cpu_data[cpu].data;
  87
  88                 for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
  89                         if (si->level_to_irq[i] == irq) {
  90                                 *cpunum = cpu;
  91
  92                                 return i;
  93                         }
  94         }
  95
  96         panic("Could not identify cpu/level for irq %d", irq);
  97 }
  98
  99 static int intr_connect_level(int cpu, int bit)
 100 {
 101         nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 102         struct slice_data *si = cpu_data[cpu].data;
 103
 104         set_bit(bit, si->irq_enable_mask);
 105
 106         if (!cputoslice(cpu)) {
 107                 REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
 108                 REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
 109         } else {
 110                 REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
 111                 REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
 112         }
 113
 114         return 0;
 115 }
 116
 117 static int intr_disconnect_level(int cpu, int bit)
 118 {
 119         nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 120         struct slice_data *si = cpu_data[cpu].data;
 121
 122         clear_bit(bit, si->irq_enable_mask);
 123
 124         if (!cputoslice(cpu)) {
 125                 REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
 126                 REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
 127         } else {
 128                 REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
 129                 REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
 130         }
 131
 132         return 0;
 133 }
 134
 135 /* Startup one of the (PCI ...) IRQs routes over a bridge.  */
 136 static unsigned int startup_bridge_irq(struct irq_data *d)
 137 {
 138         struct bridge_controller *bc;
 139         bridgereg_t device;
 140         bridge_t *bridge;
 141         int pin, swlevel;
 142         cpuid_t cpu;
 143
 144         pin = SLOT_FROM_PCI_IRQ(d->irq);
 145         bc = IRQ_TO_BRIDGE(d->irq);
 146         bridge = bc->base;
 147
 148         pr_debug("bridge_startup(): irq= 0x%x  pin=%d\n", d->irq, pin);
 149         /*
 150          * "map" irq to a swlevel greater than 6 since the first 6 bits
 151          * of INT_PEND0 are taken
 152          */
 153         swlevel = find_level(&cpu, d->irq);
 154         bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
 155         bridge->b_int_enable |= (1 << pin);
 156         bridge->b_int_enable |= 0x7ffffe00;     /* more stuff in int_enable */
 157
 158         /*
 159          * Enable sending of an interrupt clear packt to the hub on a high to
 160          * low transition of the interrupt pin.
 161          *
 162          * IRIX sets additional bits in the address which are documented as
 163          * reserved in the bridge docs.
 164          */
 165         bridge->b_int_mode |= (1UL << pin);
 166
 167         /*
 168          * We assume the bridge to have a 1:1 mapping between devices
 169          * (slots) and intr pins.
 170          */
 171         device = bridge->b_int_device;
 172         device &= ~(7 << (pin*3));
 173         device |= (pin << (pin*3));
 174         bridge->b_int_device = device;
 175
 176         bridge->b_wid_tflush;
 177
 178         intr_connect_level(cpu, swlevel);
 179
 180         return 0;       /* Never anything pending.  */
 181 }
 182
 183 /* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
 184 static void shutdown_bridge_irq(struct irq_data *d)
 185 {
 186         struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
 187         bridge_t *bridge = bc->base;
 188         int pin, swlevel;
 189         cpuid_t cpu;
 190
 191         pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
 192         pin = SLOT_FROM_PCI_IRQ(d->irq);
 193
 194         /*
 195          * map irq to a swlevel greater than 6 since the first 6 bits
 196          * of INT_PEND0 are taken
 197          */
 198         swlevel = find_level(&cpu, d->irq);
 199         intr_disconnect_level(cpu, swlevel);
 200
 201         bridge->b_int_enable &= ~(1 << pin);
 202         bridge->b_wid_tflush;
 203 }
 204
 205 static inline void enable_bridge_irq(struct irq_data *d)
 206 {
 207         cpuid_t cpu;
 208         int swlevel;
 209
 210         swlevel = find_level(&cpu, d->irq);     /* Criminal offence */
 211         intr_connect_level(cpu, swlevel);
 212 }
 213
 214 static inline void disable_bridge_irq(struct irq_data *d)
 215 {
 216         cpuid_t cpu;
 217         int swlevel;
 218
 219         swlevel = find_level(&cpu, d->irq);     /* Criminal offence */
 220         intr_disconnect_level(cpu, swlevel);
 221 }
 222
 223 static struct irq_chip bridge_irq_type = {
 224         .name           = "bridge",
 225         .irq_startup    = startup_bridge_irq,
 226         .irq_shutdown   = shutdown_bridge_irq,
 227         .irq_mask       = disable_bridge_irq,
 228         .irq_unmask     = enable_bridge_irq,
 229 };
 230
 231 void register_bridge_irq(unsigned int irq)
 232 {
 233         irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
 234 }
 235
 236 int request_bridge_irq(struct bridge_controller *bc)
 237 {
 238         int irq = allocate_irqno();
 239         int swlevel, cpu;
 240         nasid_t nasid;
 241
 242         if (irq < 0)
 243                 return irq;
 244
 245         /*
 246          * "map" irq to a swlevel greater than 6 since the first 6 bits
 247          * of INT_PEND0 are taken
 248          */
 249         cpu = bc->irq_cpu;
 250         swlevel = alloc_level(cpu, irq);
 251         if (unlikely(swlevel < 0)) {
 252                 free_irqno(irq);
 253
 254                 return -EAGAIN;
 255         }
 256
 257         /* Make sure it's not already pending when we connect it. */
 258         nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 259         REMOTE_HUB_CLR_INTR(nasid, swlevel);
 260
 261         intr_connect_level(cpu, swlevel);
 262
 263         register_bridge_irq(irq);
 264
 265         return irq;
 266 }