2 * Copyright (C) ST-Ericsson SA 2010
4 * License Terms: GNU General Public License, version 2
5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
11 #include <linux/device.h>
12 #include <linux/mfd/core.h>
13 #include <linux/mfd/stmpe.h>
14 #include <linux/printk.h>
15 #include <linux/types.h>
17 extern const struct dev_pm_ops stmpe_dev_pm_ops
;
19 #ifdef STMPE_DUMP_BYTES
20 static inline void stmpe_dump_bytes(const char *str
, const void *buf
,
23 print_hex_dump_bytes(str
, DUMP_PREFIX_OFFSET
, buf
, len
);
26 static inline void stmpe_dump_bytes(const char *str
, const void *buf
,
33 * struct stmpe_variant_block - information about block
34 * @cell: base mfd cell
35 * @irq: interrupt number to be added to each IORESOURCE_IRQ
37 * @block: block id; used for identification with platform data and for
38 * enable and altfunc callbacks
40 struct stmpe_variant_block
{
41 struct mfd_cell
*cell
;
43 enum stmpe_block block
;
47 * struct stmpe_variant_info - variant-specific information
49 * @id_val: content of CHIPID register
50 * @id_mask: bits valid in CHIPID register for comparison with id_val
51 * @num_gpios: number of GPIOS
52 * @af_bits: number of bits used to specify the alternate function
53 * @regs: variant specific registers.
54 * @blocks: list of blocks present on this device
55 * @num_blocks: number of blocks present on this device
56 * @num_irqs: number of internal IRQs available on this device
57 * @enable: callback to enable the specified blocks.
58 * Called with the I/O lock held.
59 * @get_altfunc: callback to get the alternate function number for the
61 * @enable_autosleep: callback to configure autosleep with specified timeout
63 struct stmpe_variant_info
{
70 struct stmpe_variant_block
*blocks
;
73 int (*enable
)(struct stmpe
*stmpe
, unsigned int blocks
, bool enable
);
74 int (*get_altfunc
)(struct stmpe
*stmpe
, enum stmpe_block block
);
75 int (*enable_autosleep
)(struct stmpe
*stmpe
, int autosleep_timeout
);
79 * struct stmpe_client_info - i2c or spi specific routines/info
80 * @data: client specific data
81 * @read_byte: read single byte
82 * @write_byte: write single byte
83 * @read_block: read block or multiple bytes
84 * @write_block: write block or multiple bytes
85 * @init: client init routine, called during probe
87 struct stmpe_client_info
{
92 int (*read_byte
)(struct stmpe
*stmpe
, u8 reg
);
93 int (*write_byte
)(struct stmpe
*stmpe
, u8 reg
, u8 val
);
94 int (*read_block
)(struct stmpe
*stmpe
, u8 reg
, u8 len
, u8
*values
);
95 int (*write_block
)(struct stmpe
*stmpe
, u8 reg
, u8 len
,
97 void (*init
)(struct stmpe
*stmpe
);
100 int stmpe_probe(struct stmpe_client_info
*ci
, int partnum
);
101 int stmpe_remove(struct stmpe
*stmpe
);
103 #define STMPE_ICR_LSB_HIGH (1 << 2)
104 #define STMPE_ICR_LSB_EDGE (1 << 1)
105 #define STMPE_ICR_LSB_GIM (1 << 0)
110 #define STMPE801_ID 0x0108
111 #define STMPE801_NR_INTERNAL_IRQS 1
113 #define STMPE801_REG_CHIP_ID 0x00
114 #define STMPE801_REG_VERSION_ID 0x02
115 #define STMPE801_REG_SYS_CTRL 0x04
116 #define STMPE801_REG_GPIO_INT_EN 0x08
117 #define STMPE801_REG_GPIO_INT_STA 0x09
118 #define STMPE801_REG_GPIO_MP_STA 0x10
119 #define STMPE801_REG_GPIO_SET_PIN 0x11
120 #define STMPE801_REG_GPIO_DIR 0x12
122 #define STMPE801_REG_SYS_CTRL_RESET (1 << 7)
123 #define STMPE801_REG_SYS_CTRL_INT_EN (1 << 2)
124 #define STMPE801_REG_SYS_CTRL_INT_HI (1 << 0)
130 #define STMPE811_IRQ_TOUCH_DET 0
131 #define STMPE811_IRQ_FIFO_TH 1
132 #define STMPE811_IRQ_FIFO_OFLOW 2
133 #define STMPE811_IRQ_FIFO_FULL 3
134 #define STMPE811_IRQ_FIFO_EMPTY 4
135 #define STMPE811_IRQ_TEMP_SENS 5
136 #define STMPE811_IRQ_ADC 6
137 #define STMPE811_IRQ_GPIOC 7
138 #define STMPE811_NR_INTERNAL_IRQS 8
140 #define STMPE811_REG_CHIP_ID 0x00
141 #define STMPE811_REG_SYS_CTRL2 0x04
142 #define STMPE811_REG_SPI_CFG 0x08
143 #define STMPE811_REG_INT_CTRL 0x09
144 #define STMPE811_REG_INT_EN 0x0A
145 #define STMPE811_REG_INT_STA 0x0B
146 #define STMPE811_REG_GPIO_INT_EN 0x0C
147 #define STMPE811_REG_GPIO_INT_STA 0x0D
148 #define STMPE811_REG_GPIO_SET_PIN 0x10
149 #define STMPE811_REG_GPIO_CLR_PIN 0x11
150 #define STMPE811_REG_GPIO_MP_STA 0x12
151 #define STMPE811_REG_GPIO_DIR 0x13
152 #define STMPE811_REG_GPIO_ED 0x14
153 #define STMPE811_REG_GPIO_RE 0x15
154 #define STMPE811_REG_GPIO_FE 0x16
155 #define STMPE811_REG_GPIO_AF 0x17
157 #define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
158 #define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
159 #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
160 #define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
166 #define STMPE1601_IRQ_GPIOC 8
167 #define STMPE1601_IRQ_PWM3 7
168 #define STMPE1601_IRQ_PWM2 6
169 #define STMPE1601_IRQ_PWM1 5
170 #define STMPE1601_IRQ_PWM0 4
171 #define STMPE1601_IRQ_KEYPAD_OVER 2
172 #define STMPE1601_IRQ_KEYPAD 1
173 #define STMPE1601_IRQ_WAKEUP 0
174 #define STMPE1601_NR_INTERNAL_IRQS 9
176 #define STMPE1601_REG_SYS_CTRL 0x02
177 #define STMPE1601_REG_SYS_CTRL2 0x03
178 #define STMPE1601_REG_ICR_LSB 0x11
179 #define STMPE1601_REG_IER_LSB 0x13
180 #define STMPE1601_REG_ISR_MSB 0x14
181 #define STMPE1601_REG_CHIP_ID 0x80
182 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17
183 #define STMPE1601_REG_INT_STA_GPIO_MSB 0x18
184 #define STMPE1601_REG_GPIO_MP_LSB 0x87
185 #define STMPE1601_REG_GPIO_SET_LSB 0x83
186 #define STMPE1601_REG_GPIO_CLR_LSB 0x85
187 #define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89
188 #define STMPE1601_REG_GPIO_ED_MSB 0x8A
189 #define STMPE1601_REG_GPIO_RE_LSB 0x8D
190 #define STMPE1601_REG_GPIO_FE_LSB 0x8F
191 #define STMPE1601_REG_GPIO_AF_U_MSB 0x92
193 #define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
194 #define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
195 #define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
197 /* The 1601/2403 share the same masks */
198 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
199 #define STPME1601_AUTOSLEEP_ENABLE (1 << 3)
204 #define STMPE1801_ID 0xc110
205 #define STMPE1801_NR_INTERNAL_IRQS 5
206 #define STMPE1801_IRQ_KEYPAD_COMBI 4
207 #define STMPE1801_IRQ_GPIOC 3
208 #define STMPE1801_IRQ_KEYPAD_OVER 2
209 #define STMPE1801_IRQ_KEYPAD 1
210 #define STMPE1801_IRQ_WAKEUP 0
212 #define STMPE1801_REG_CHIP_ID 0x00
213 #define STMPE1801_REG_SYS_CTRL 0x02
214 #define STMPE1801_REG_INT_CTRL_LOW 0x04
215 #define STMPE1801_REG_INT_EN_MASK_LOW 0x06
216 #define STMPE1801_REG_INT_STA_LOW 0x08
217 #define STMPE1801_REG_INT_EN_GPIO_MASK_LOW 0x0A
218 #define STMPE1801_REG_INT_EN_GPIO_MASK_MID 0x0B
219 #define STMPE1801_REG_INT_EN_GPIO_MASK_HIGH 0x0C
220 #define STMPE1801_REG_INT_STA_GPIO_LOW 0x0D
221 #define STMPE1801_REG_INT_STA_GPIO_MID 0x0E
222 #define STMPE1801_REG_INT_STA_GPIO_HIGH 0x0F
223 #define STMPE1801_REG_GPIO_SET_LOW 0x10
224 #define STMPE1801_REG_GPIO_SET_MID 0x11
225 #define STMPE1801_REG_GPIO_SET_HIGH 0x12
226 #define STMPE1801_REG_GPIO_CLR_LOW 0x13
227 #define STMPE1801_REG_GPIO_CLR_MID 0x14
228 #define STMPE1801_REG_GPIO_CLR_HIGH 0x15
229 #define STMPE1801_REG_GPIO_MP_LOW 0x16
230 #define STMPE1801_REG_GPIO_MP_MID 0x17
231 #define STMPE1801_REG_GPIO_MP_HIGH 0x18
232 #define STMPE1801_REG_GPIO_SET_DIR_LOW 0x19
233 #define STMPE1801_REG_GPIO_SET_DIR_MID 0x1A
234 #define STMPE1801_REG_GPIO_SET_DIR_HIGH 0x1B
235 #define STMPE1801_REG_GPIO_RE_LOW 0x1C
236 #define STMPE1801_REG_GPIO_RE_MID 0x1D
237 #define STMPE1801_REG_GPIO_RE_HIGH 0x1E
238 #define STMPE1801_REG_GPIO_FE_LOW 0x1F
239 #define STMPE1801_REG_GPIO_FE_MID 0x20
240 #define STMPE1801_REG_GPIO_FE_HIGH 0x21
241 #define STMPE1801_REG_GPIO_PULL_UP_LOW 0x22
242 #define STMPE1801_REG_GPIO_PULL_UP_MID 0x23
243 #define STMPE1801_REG_GPIO_PULL_UP_HIGH 0x24
245 #define STMPE1801_MSK_SYS_CTRL_RESET (1 << 7)
247 #define STMPE1801_MSK_INT_EN_KPC (1 << 1)
248 #define STMPE1801_MSK_INT_EN_GPIO (1 << 3)
254 #define STMPE24XX_IRQ_GPIOC 8
255 #define STMPE24XX_IRQ_PWM2 7
256 #define STMPE24XX_IRQ_PWM1 6
257 #define STMPE24XX_IRQ_PWM0 5
258 #define STMPE24XX_IRQ_ROT_OVER 4
259 #define STMPE24XX_IRQ_ROT 3
260 #define STMPE24XX_IRQ_KEYPAD_OVER 2
261 #define STMPE24XX_IRQ_KEYPAD 1
262 #define STMPE24XX_IRQ_WAKEUP 0
263 #define STMPE24XX_NR_INTERNAL_IRQS 9
265 #define STMPE24XX_REG_SYS_CTRL 0x02
266 #define STMPE24XX_REG_ICR_LSB 0x11
267 #define STMPE24XX_REG_IER_LSB 0x13
268 #define STMPE24XX_REG_ISR_MSB 0x14
269 #define STMPE24XX_REG_CHIP_ID 0x80
270 #define STMPE24XX_REG_IEGPIOR_LSB 0x18
271 #define STMPE24XX_REG_ISGPIOR_MSB 0x19
272 #define STMPE24XX_REG_GPMR_LSB 0xA5
273 #define STMPE24XX_REG_GPSR_LSB 0x85
274 #define STMPE24XX_REG_GPCR_LSB 0x88
275 #define STMPE24XX_REG_GPDR_LSB 0x8B
276 #define STMPE24XX_REG_GPEDR_MSB 0x8C
277 #define STMPE24XX_REG_GPRER_LSB 0x91
278 #define STMPE24XX_REG_GPFER_LSB 0x94
279 #define STMPE24XX_REG_GPAFR_U_MSB 0x9B
281 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
282 #define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2)
283 #define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1)
284 #define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0)