Linux 3.11-rc3
[cris-mirror.git] / drivers / mfd / wm8994-irq.c
blobd3a184a240f5e0a7cb683bb330b82d01c15eaeaf
1 /*
2 * wm8994-irq.c -- Interrupt controller support for Wolfson WM8994
4 * Copyright 2010 Wolfson Microelectronics PLC.
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/gpio.h>
18 #include <linux/i2c.h>
19 #include <linux/irq.h>
20 #include <linux/mfd/core.h>
21 #include <linux/interrupt.h>
22 #include <linux/irqdomain.h>
23 #include <linux/regmap.h>
25 #include <linux/mfd/wm8994/core.h>
26 #include <linux/mfd/wm8994/pdata.h>
27 #include <linux/mfd/wm8994/registers.h>
29 #include <linux/delay.h>
31 static struct regmap_irq wm8994_irqs[] = {
32 [WM8994_IRQ_TEMP_SHUT] = {
33 .reg_offset = 1,
34 .mask = WM8994_TEMP_SHUT_EINT,
36 [WM8994_IRQ_MIC1_DET] = {
37 .reg_offset = 1,
38 .mask = WM8994_MIC1_DET_EINT,
40 [WM8994_IRQ_MIC1_SHRT] = {
41 .reg_offset = 1,
42 .mask = WM8994_MIC1_SHRT_EINT,
44 [WM8994_IRQ_MIC2_DET] = {
45 .reg_offset = 1,
46 .mask = WM8994_MIC2_DET_EINT,
48 [WM8994_IRQ_MIC2_SHRT] = {
49 .reg_offset = 1,
50 .mask = WM8994_MIC2_SHRT_EINT,
52 [WM8994_IRQ_FLL1_LOCK] = {
53 .reg_offset = 1,
54 .mask = WM8994_FLL1_LOCK_EINT,
56 [WM8994_IRQ_FLL2_LOCK] = {
57 .reg_offset = 1,
58 .mask = WM8994_FLL2_LOCK_EINT,
60 [WM8994_IRQ_SRC1_LOCK] = {
61 .reg_offset = 1,
62 .mask = WM8994_SRC1_LOCK_EINT,
64 [WM8994_IRQ_SRC2_LOCK] = {
65 .reg_offset = 1,
66 .mask = WM8994_SRC2_LOCK_EINT,
68 [WM8994_IRQ_AIF1DRC1_SIG_DET] = {
69 .reg_offset = 1,
70 .mask = WM8994_AIF1DRC1_SIG_DET,
72 [WM8994_IRQ_AIF1DRC2_SIG_DET] = {
73 .reg_offset = 1,
74 .mask = WM8994_AIF1DRC2_SIG_DET_EINT,
76 [WM8994_IRQ_AIF2DRC_SIG_DET] = {
77 .reg_offset = 1,
78 .mask = WM8994_AIF2DRC_SIG_DET_EINT,
80 [WM8994_IRQ_FIFOS_ERR] = {
81 .reg_offset = 1,
82 .mask = WM8994_FIFOS_ERR_EINT,
84 [WM8994_IRQ_WSEQ_DONE] = {
85 .reg_offset = 1,
86 .mask = WM8994_WSEQ_DONE_EINT,
88 [WM8994_IRQ_DCS_DONE] = {
89 .reg_offset = 1,
90 .mask = WM8994_DCS_DONE_EINT,
92 [WM8994_IRQ_TEMP_WARN] = {
93 .reg_offset = 1,
94 .mask = WM8994_TEMP_WARN_EINT,
96 [WM8994_IRQ_GPIO(1)] = {
97 .mask = WM8994_GP1_EINT,
99 [WM8994_IRQ_GPIO(2)] = {
100 .mask = WM8994_GP2_EINT,
102 [WM8994_IRQ_GPIO(3)] = {
103 .mask = WM8994_GP3_EINT,
105 [WM8994_IRQ_GPIO(4)] = {
106 .mask = WM8994_GP4_EINT,
108 [WM8994_IRQ_GPIO(5)] = {
109 .mask = WM8994_GP5_EINT,
111 [WM8994_IRQ_GPIO(6)] = {
112 .mask = WM8994_GP6_EINT,
114 [WM8994_IRQ_GPIO(7)] = {
115 .mask = WM8994_GP7_EINT,
117 [WM8994_IRQ_GPIO(8)] = {
118 .mask = WM8994_GP8_EINT,
120 [WM8994_IRQ_GPIO(9)] = {
121 .mask = WM8994_GP8_EINT,
123 [WM8994_IRQ_GPIO(10)] = {
124 .mask = WM8994_GP10_EINT,
126 [WM8994_IRQ_GPIO(11)] = {
127 .mask = WM8994_GP11_EINT,
131 static struct regmap_irq_chip wm8994_irq_chip = {
132 .name = "wm8994",
133 .irqs = wm8994_irqs,
134 .num_irqs = ARRAY_SIZE(wm8994_irqs),
136 .num_regs = 2,
137 .status_base = WM8994_INTERRUPT_STATUS_1,
138 .mask_base = WM8994_INTERRUPT_STATUS_1_MASK,
139 .ack_base = WM8994_INTERRUPT_STATUS_1,
140 .runtime_pm = true,
143 static void wm8994_edge_irq_enable(struct irq_data *data)
147 static void wm8994_edge_irq_disable(struct irq_data *data)
151 static struct irq_chip wm8994_edge_irq_chip = {
152 .name = "wm8994_edge",
153 .irq_disable = wm8994_edge_irq_disable,
154 .irq_enable = wm8994_edge_irq_enable,
157 static irqreturn_t wm8994_edge_irq(int irq, void *data)
159 struct wm8994 *wm8994 = data;
161 while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
162 handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
164 return IRQ_HANDLED;
167 static int wm8994_edge_irq_map(struct irq_domain *h, unsigned int virq,
168 irq_hw_number_t hw)
170 struct wm8994 *wm8994 = h->host_data;
172 irq_set_chip_data(virq, wm8994);
173 irq_set_chip_and_handler(virq, &wm8994_edge_irq_chip, handle_edge_irq);
174 irq_set_nested_thread(virq, 1);
176 /* ARM needs us to explicitly flag the IRQ as valid
177 * and will set them noprobe when we do so. */
178 #ifdef CONFIG_ARM
179 set_irq_flags(virq, IRQF_VALID);
180 #else
181 irq_set_noprobe(virq);
182 #endif
184 return 0;
187 static struct irq_domain_ops wm8994_edge_irq_ops = {
188 .map = wm8994_edge_irq_map,
189 .xlate = irq_domain_xlate_twocell,
192 int wm8994_irq_init(struct wm8994 *wm8994)
194 int ret;
195 unsigned long irqflags;
196 struct wm8994_pdata *pdata = wm8994->dev->platform_data;
198 if (!wm8994->irq) {
199 dev_warn(wm8994->dev,
200 "No interrupt specified, no interrupts\n");
201 wm8994->irq_base = 0;
202 return 0;
205 /* select user or default irq flags */
206 irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
207 if (pdata->irq_flags)
208 irqflags = pdata->irq_flags;
210 /* use a GPIO for edge triggered controllers */
211 if (irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
212 if (gpio_to_irq(pdata->irq_gpio) != wm8994->irq) {
213 dev_warn(wm8994->dev, "IRQ %d is not GPIO %d (%d)\n",
214 wm8994->irq, pdata->irq_gpio,
215 gpio_to_irq(pdata->irq_gpio));
216 wm8994->irq = gpio_to_irq(pdata->irq_gpio);
219 ret = devm_gpio_request_one(wm8994->dev, pdata->irq_gpio,
220 GPIOF_IN, "WM8994 IRQ");
222 if (ret != 0) {
223 dev_err(wm8994->dev, "Failed to get IRQ GPIO: %d\n",
224 ret);
225 return ret;
228 wm8994->edge_irq = irq_domain_add_linear(NULL, 1,
229 &wm8994_edge_irq_ops,
230 wm8994);
232 ret = regmap_add_irq_chip(wm8994->regmap,
233 irq_create_mapping(wm8994->edge_irq,
235 IRQF_ONESHOT,
236 wm8994->irq_base, &wm8994_irq_chip,
237 &wm8994->irq_data);
238 if (ret != 0) {
239 dev_err(wm8994->dev, "Failed to get IRQ: %d\n",
240 ret);
241 return ret;
244 ret = request_threaded_irq(wm8994->irq,
245 NULL, wm8994_edge_irq,
246 irqflags,
247 "WM8994 edge", wm8994);
248 } else {
249 ret = regmap_add_irq_chip(wm8994->regmap, wm8994->irq,
250 irqflags,
251 wm8994->irq_base, &wm8994_irq_chip,
252 &wm8994->irq_data);
255 if (ret != 0) {
256 dev_err(wm8994->dev, "Failed to register IRQ chip: %d\n", ret);
257 return ret;
260 /* Enable top level interrupt if it was masked */
261 wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
263 return 0;
266 void wm8994_irq_exit(struct wm8994 *wm8994)
268 regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);