drivers/mtd/nand/atmel_nand_ecc.h

   1 /*
   2  * Error Corrected Code Controller (ECC) - System peripherals regsters.
   3  * Based on AT91SAM9260 datasheet revision B.
   4  *
   5  * Copyright (C) 2007 Andrew Victor
   6  * Copyright (C) 2007 - 2012 Atmel Corporation.
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of the GNU General Public License as published by the
  10  * Free Software Foundation; either version 2 of the License, or (at your
  11  * option) any later version.
  12  */
  13
  14 #ifndef ATMEL_NAND_ECC_H
  15 #define ATMEL_NAND_ECC_H
  16
  17 #define ATMEL_ECC_CR            0x00                    /* Control register */
  18 #define         ATMEL_ECC_RST           (1 << 0)                /* Reset parity */
  19
  20 #define ATMEL_ECC_MR            0x04                    /* Mode register */
  21 #define         ATMEL_ECC_PAGESIZE      (3 << 0)                /* Page Size */
  22 #define                 ATMEL_ECC_PAGESIZE_528          (0)
  23 #define                 ATMEL_ECC_PAGESIZE_1056         (1)
  24 #define                 ATMEL_ECC_PAGESIZE_2112         (2)
  25 #define                 ATMEL_ECC_PAGESIZE_4224         (3)
  26
  27 #define ATMEL_ECC_SR            0x08                    /* Status register */
  28 #define         ATMEL_ECC_RECERR                (1 << 0)                /* Recoverable Error */
  29 #define         ATMEL_ECC_ECCERR                (1 << 1)                /* ECC Single Bit Error */
  30 #define         ATMEL_ECC_MULERR                (1 << 2)                /* Multiple Errors */
  31
  32 #define ATMEL_ECC_PR            0x0c                    /* Parity register */
  33 #define         ATMEL_ECC_BITADDR       (0xf << 0)              /* Bit Error Address */
  34 #define         ATMEL_ECC_WORDADDR      (0xfff << 4)            /* Word Error Address */
  35
  36 #define ATMEL_ECC_NPR           0x10                    /* NParity register */
  37 #define         ATMEL_ECC_NPARITY       (0xffff << 0)           /* NParity */
  38
  39 /* PMECC Register Definitions */
  40 #define ATMEL_PMECC_CFG                 0x000   /* Configuration Register */
  41 #define         PMECC_CFG_BCH_ERR2              (0 << 0)
  42 #define         PMECC_CFG_BCH_ERR4              (1 << 0)
  43 #define         PMECC_CFG_BCH_ERR8              (2 << 0)
  44 #define         PMECC_CFG_BCH_ERR12             (3 << 0)
  45 #define         PMECC_CFG_BCH_ERR24             (4 << 0)
  46
  47 #define         PMECC_CFG_SECTOR512             (0 << 4)
  48 #define         PMECC_CFG_SECTOR1024            (1 << 4)
  49
  50 #define         PMECC_CFG_PAGE_1SECTOR          (0 << 8)
  51 #define         PMECC_CFG_PAGE_2SECTORS         (1 << 8)
  52 #define         PMECC_CFG_PAGE_4SECTORS         (2 << 8)
  53 #define         PMECC_CFG_PAGE_8SECTORS         (3 << 8)
  54
  55 #define         PMECC_CFG_READ_OP               (0 << 12)
  56 #define         PMECC_CFG_WRITE_OP              (1 << 12)
  57
  58 #define         PMECC_CFG_SPARE_ENABLE          (1 << 16)
  59 #define         PMECC_CFG_SPARE_DISABLE         (0 << 16)
  60
  61 #define         PMECC_CFG_AUTO_ENABLE           (1 << 20)
  62 #define         PMECC_CFG_AUTO_DISABLE          (0 << 20)
  63
  64 #define ATMEL_PMECC_SAREA               0x004   /* Spare area size */
  65 #define ATMEL_PMECC_SADDR               0x008   /* PMECC starting address */
  66 #define ATMEL_PMECC_EADDR               0x00c   /* PMECC ending address */
  67 #define ATMEL_PMECC_CLK                 0x010   /* PMECC clock control */
  68 #define         PMECC_CLK_133MHZ                (2 << 0)
  69
  70 #define ATMEL_PMECC_CTRL                0x014   /* PMECC control register */
  71 #define         PMECC_CTRL_RST                  (1 << 0)
  72 #define         PMECC_CTRL_DATA                 (1 << 1)
  73 #define         PMECC_CTRL_USER                 (1 << 2)
  74 #define         PMECC_CTRL_ENABLE               (1 << 4)
  75 #define         PMECC_CTRL_DISABLE              (1 << 5)
  76
  77 #define ATMEL_PMECC_SR                  0x018   /* PMECC status register */
  78 #define         PMECC_SR_BUSY                   (1 << 0)
  79 #define         PMECC_SR_ENABLE                 (1 << 4)
  80
  81 #define ATMEL_PMECC_IER                 0x01c   /* PMECC interrupt enable */
  82 #define         PMECC_IER_ENABLE                (1 << 0)
  83 #define ATMEL_PMECC_IDR                 0x020   /* PMECC interrupt disable */
  84 #define         PMECC_IER_DISABLE               (1 << 0)
  85 #define ATMEL_PMECC_IMR                 0x024   /* PMECC interrupt mask */
  86 #define         PMECC_IER_MASK                  (1 << 0)
  87 #define ATMEL_PMECC_ISR                 0x028   /* PMECC interrupt status */
  88 #define ATMEL_PMECC_ECCx                0x040   /* PMECC ECC x */
  89 #define ATMEL_PMECC_REMx                0x240   /* PMECC REM x */
  90
  91 /* PMERRLOC Register Definitions */
  92 #define ATMEL_PMERRLOC_ELCFG            0x000   /* Error location config */
  93 #define         PMERRLOC_ELCFG_SECTOR_512       (0 << 0)
  94 #define         PMERRLOC_ELCFG_SECTOR_1024      (1 << 0)
  95 #define         PMERRLOC_ELCFG_NUM_ERRORS(n)    ((n) << 16)
  96
  97 #define ATMEL_PMERRLOC_ELPRIM           0x004   /* Error location primitive */
  98 #define ATMEL_PMERRLOC_ELEN             0x008   /* Error location enable */
  99 #define ATMEL_PMERRLOC_ELDIS            0x00c   /* Error location disable */
 100 #define         PMERRLOC_DISABLE                (1 << 0)
 101
 102 #define ATMEL_PMERRLOC_ELSR             0x010   /* Error location status */
 103 #define         PMERRLOC_ELSR_BUSY              (1 << 0)
 104 #define ATMEL_PMERRLOC_ELIER            0x014   /* Error location int enable */
 105 #define ATMEL_PMERRLOC_ELIDR            0x018   /* Error location int disable */
 106 #define ATMEL_PMERRLOC_ELIMR            0x01c   /* Error location int mask */
 107 #define ATMEL_PMERRLOC_ELISR            0x020   /* Error location int status */
 108 #define         PMERRLOC_ERR_NUM_MASK           (0x1f << 8)
 109 #define         PMERRLOC_CALC_DONE              (1 << 0)
 110 #define ATMEL_PMERRLOC_SIGMAx           0x028   /* Error location SIGMA x */
 111 #define ATMEL_PMERRLOC_ELx              0x08c   /* Error location x */
 112
 113 /* Register access macros for PMECC */
 114 #define pmecc_readl_relaxed(addr, reg) \
 115         readl_relaxed((addr) + ATMEL_PMECC_##reg)
 116
 117 #define pmecc_writel(addr, reg, value) \
 118         writel((value), (addr) + ATMEL_PMECC_##reg)
 119
 120 #define pmecc_readb_ecc_relaxed(addr, sector, n) \
 121         readb_relaxed((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n))
 122
 123 #define pmecc_readl_rem_relaxed(addr, sector, n) \
 124         readl_relaxed((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4))
 125
 126 #define pmerrloc_readl_relaxed(addr, reg) \
 127         readl_relaxed((addr) + ATMEL_PMERRLOC_##reg)
 128
 129 #define pmerrloc_writel(addr, reg, value) \
 130         writel((value), (addr) + ATMEL_PMERRLOC_##reg)
 131
 132 #define pmerrloc_writel_sigma_relaxed(addr, n, value) \
 133         writel_relaxed((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
 134
 135 #define pmerrloc_readl_sigma_relaxed(addr, n) \
 136         readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
 137
 138 #define pmerrloc_readl_el_relaxed(addr, n) \
 139         readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4))
 140
 141 /* Galois field dimension */
 142 #define PMECC_GF_DIMENSION_13                   13
 143 #define PMECC_GF_DIMENSION_14                   14
 144
 145 #define PMECC_LOOKUP_TABLE_SIZE_512             0x2000
 146 #define PMECC_LOOKUP_TABLE_SIZE_1024            0x4000
 147
 148 /* Time out value for reading PMECC status register */
 149 #define PMECC_MAX_TIMEOUT_MS                    100
 150
 151 #endif