drivers/net/phy/at803x.c

   1 /*
   2  * drivers/net/phy/at803x.c
   3  *
   4  * Driver for Atheros 803x PHY
   5  *
   6  * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  */
  13
  14 #include <linux/phy.h>
  15 #include <linux/module.h>
  16 #include <linux/string.h>
  17 #include <linux/netdevice.h>
  18 #include <linux/etherdevice.h>
  19
  20 #define AT803X_INTR_ENABLE                      0x12
  21 #define AT803X_INTR_STATUS                      0x13
  22 #define AT803X_WOL_ENABLE                       0x01
  23 #define AT803X_DEVICE_ADDR                      0x03
  24 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET         0x804C
  25 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET        0x804B
  26 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET        0x804A
  27 #define AT803X_MMD_ACCESS_CONTROL               0x0D
  28 #define AT803X_MMD_ACCESS_CONTROL_DATA          0x0E
  29 #define AT803X_FUNC_DATA                        0x4003
  30 #define AT803X_DEBUG_ADDR                       0x1D
  31 #define AT803X_DEBUG_DATA                       0x1E
  32 #define AT803X_DEBUG_SYSTEM_MODE_CTRL           0x05
  33 #define AT803X_DEBUG_RGMII_TX_CLK_DLY           BIT(8)
  34
  35 MODULE_DESCRIPTION("Atheros 803x PHY driver");
  36 MODULE_AUTHOR("Matus Ujhelyi");
  37 MODULE_LICENSE("GPL");
  38
  39 static int at803x_set_wol(struct phy_device *phydev,
  40                           struct ethtool_wolinfo *wol)
  41 {
  42         struct net_device *ndev = phydev->attached_dev;
  43         const u8 *mac;
  44         int ret;
  45         u32 value;
  46         unsigned int i, offsets[] = {
  47                 AT803X_LOC_MAC_ADDR_32_47_OFFSET,
  48                 AT803X_LOC_MAC_ADDR_16_31_OFFSET,
  49                 AT803X_LOC_MAC_ADDR_0_15_OFFSET,
  50         };
  51
  52         if (!ndev)
  53                 return -ENODEV;
  54
  55         if (wol->wolopts & WAKE_MAGIC) {
  56                 mac = (const u8 *) ndev->dev_addr;
  57
  58                 if (!is_valid_ether_addr(mac))
  59                         return -EFAULT;
  60
  61                 for (i = 0; i < 3; i++) {
  62                         phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
  63                                   AT803X_DEVICE_ADDR);
  64                         phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
  65                                   offsets[i]);
  66                         phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
  67                                   AT803X_FUNC_DATA);
  68                         phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
  69                                   mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
  70                 }
  71
  72                 value = phy_read(phydev, AT803X_INTR_ENABLE);
  73                 value |= AT803X_WOL_ENABLE;
  74                 ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
  75                 if (ret)
  76                         return ret;
  77                 value = phy_read(phydev, AT803X_INTR_STATUS);
  78         } else {
  79                 value = phy_read(phydev, AT803X_INTR_ENABLE);
  80                 value &= (~AT803X_WOL_ENABLE);
  81                 ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
  82                 if (ret)
  83                         return ret;
  84                 value = phy_read(phydev, AT803X_INTR_STATUS);
  85         }
  86
  87         return ret;
  88 }
  89
  90 static void at803x_get_wol(struct phy_device *phydev,
  91                            struct ethtool_wolinfo *wol)
  92 {
  93         u32 value;
  94
  95         wol->supported = WAKE_MAGIC;
  96         wol->wolopts = 0;
  97
  98         value = phy_read(phydev, AT803X_INTR_ENABLE);
  99         if (value & AT803X_WOL_ENABLE)
 100                 wol->wolopts |= WAKE_MAGIC;
 101 }
 102
 103 static int at803x_config_init(struct phy_device *phydev)
 104 {
 105         int val;
 106         int ret;
 107         u32 features;
 108
 109         features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
 110                    SUPPORTED_FIBRE | SUPPORTED_BNC;
 111
 112         val = phy_read(phydev, MII_BMSR);
 113         if (val < 0)
 114                 return val;
 115
 116         if (val & BMSR_ANEGCAPABLE)
 117                 features |= SUPPORTED_Autoneg;
 118         if (val & BMSR_100FULL)
 119                 features |= SUPPORTED_100baseT_Full;
 120         if (val & BMSR_100HALF)
 121                 features |= SUPPORTED_100baseT_Half;
 122         if (val & BMSR_10FULL)
 123                 features |= SUPPORTED_10baseT_Full;
 124         if (val & BMSR_10HALF)
 125                 features |= SUPPORTED_10baseT_Half;
 126
 127         if (val & BMSR_ESTATEN) {
 128                 val = phy_read(phydev, MII_ESTATUS);
 129                 if (val < 0)
 130                         return val;
 131
 132                 if (val & ESTATUS_1000_TFULL)
 133                         features |= SUPPORTED_1000baseT_Full;
 134                 if (val & ESTATUS_1000_THALF)
 135                         features |= SUPPORTED_1000baseT_Half;
 136         }
 137
 138         phydev->supported = features;
 139         phydev->advertising = features;
 140
 141         if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 142                 ret = phy_write(phydev, AT803X_DEBUG_ADDR,
 143                                 AT803X_DEBUG_SYSTEM_MODE_CTRL);
 144                 if (ret)
 145                         return ret;
 146                 ret = phy_write(phydev, AT803X_DEBUG_DATA,
 147                                 AT803X_DEBUG_RGMII_TX_CLK_DLY);
 148                 if (ret)
 149                         return ret;
 150         }
 151
 152         return 0;
 153 }
 154
 155 static struct phy_driver at803x_driver[] = {
 156 {
 157         /* ATHEROS 8035 */
 158         .phy_id         = 0x004dd072,
 159         .name           = "Atheros 8035 ethernet",
 160         .phy_id_mask    = 0xffffffef,
 161         .config_init    = at803x_config_init,
 162         .set_wol        = at803x_set_wol,
 163         .get_wol        = at803x_get_wol,
 164         .features       = PHY_GBIT_FEATURES,
 165         .flags          = PHY_HAS_INTERRUPT,
 166         .config_aneg    = &genphy_config_aneg,
 167         .read_status    = &genphy_read_status,
 168         .driver         = {
 169                 .owner = THIS_MODULE,
 170         },
 171 }, {
 172         /* ATHEROS 8030 */
 173         .phy_id         = 0x004dd076,
 174         .name           = "Atheros 8030 ethernet",
 175         .phy_id_mask    = 0xffffffef,
 176         .config_init    = at803x_config_init,
 177         .set_wol        = at803x_set_wol,
 178         .get_wol        = at803x_get_wol,
 179         .features       = PHY_GBIT_FEATURES,
 180         .flags          = PHY_HAS_INTERRUPT,
 181         .config_aneg    = &genphy_config_aneg,
 182         .read_status    = &genphy_read_status,
 183         .driver         = {
 184                 .owner = THIS_MODULE,
 185         },
 186 }, {
 187         /* ATHEROS 8031 */
 188         .phy_id         = 0x004dd074,
 189         .name           = "Atheros 8031 ethernet",
 190         .phy_id_mask    = 0xffffffef,
 191         .config_init    = at803x_config_init,
 192         .set_wol        = at803x_set_wol,
 193         .get_wol        = at803x_get_wol,
 194         .features       = PHY_GBIT_FEATURES,
 195         .flags          = PHY_HAS_INTERRUPT,
 196         .config_aneg    = &genphy_config_aneg,
 197         .read_status    = &genphy_read_status,
 198         .driver         = {
 199                 .owner = THIS_MODULE,
 200         },
 201 } };
 202
 203 static int __init atheros_init(void)
 204 {
 205         return phy_drivers_register(at803x_driver,
 206                                     ARRAY_SIZE(at803x_driver));
 207 }
 208
 209 static void __exit atheros_exit(void)
 210 {
 211         return phy_drivers_unregister(at803x_driver,
 212                                       ARRAY_SIZE(at803x_driver));
 213 }
 214
 215 module_init(atheros_init);
 216 module_exit(atheros_exit);
 217
 218 static struct mdio_device_id __maybe_unused atheros_tbl[] = {
 219         { 0x004dd076, 0xffffffef },
 220         { 0x004dd074, 0xffffffef },
 221         { 0x004dd072, 0xffffffef },
 222         { }
 223 };
 224
 225 MODULE_DEVICE_TABLE(mdio, atheros_tbl);