1 /***************************************************************************
3 * Copyright (C) 2007-2010 SMSC
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 *****************************************************************************/
21 #include <linux/module.h>
22 #include <linux/kmod.h>
23 #include <linux/init.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/mii.h>
28 #include <linux/usb.h>
29 #include <linux/bitrev.h>
30 #include <linux/crc16.h>
31 #include <linux/crc32.h>
32 #include <linux/usb/usbnet.h>
33 #include <linux/slab.h>
36 #define SMSC_CHIPNAME "smsc75xx"
37 #define SMSC_DRIVER_VERSION "1.0.0"
38 #define HS_USB_PKT_SIZE (512)
39 #define FS_USB_PKT_SIZE (64)
40 #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
41 #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
42 #define DEFAULT_BULK_IN_DELAY (0x00002000)
43 #define MAX_SINGLE_PACKET_SIZE (9000)
44 #define LAN75XX_EEPROM_MAGIC (0x7500)
45 #define EEPROM_MAC_OFFSET (0x01)
46 #define DEFAULT_TX_CSUM_ENABLE (true)
47 #define DEFAULT_RX_CSUM_ENABLE (true)
48 #define DEFAULT_TSO_ENABLE (true)
49 #define SMSC75XX_INTERNAL_PHY_ID (1)
50 #define SMSC75XX_TX_OVERHEAD (8)
51 #define MAX_RX_FIFO_SIZE (20 * 1024)
52 #define MAX_TX_FIFO_SIZE (12 * 1024)
53 #define USB_VENDOR_ID_SMSC (0x0424)
54 #define USB_PRODUCT_ID_LAN7500 (0x7500)
55 #define USB_PRODUCT_ID_LAN7505 (0x7505)
57 #define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
58 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
60 #define SUSPEND_SUSPEND0 (0x01)
61 #define SUSPEND_SUSPEND1 (0x02)
62 #define SUSPEND_SUSPEND2 (0x04)
63 #define SUSPEND_SUSPEND3 (0x08)
64 #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
65 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
67 struct smsc75xx_priv
{
71 u32 multicast_hash_table
[DP_SEL_VHF_HASH_LEN
];
72 struct mutex dataport_mutex
;
73 spinlock_t rfe_ctl_lock
;
74 struct work_struct set_multicast
;
79 struct usb_ctrlrequest req
;
83 static bool turbo_mode
= true;
84 module_param(turbo_mode
, bool, 0644);
85 MODULE_PARM_DESC(turbo_mode
, "Enable multiple frames per Rx transaction");
87 static int __must_check
__smsc75xx_read_reg(struct usbnet
*dev
, u32 index
,
92 int (*fn
)(struct usbnet
*, u8
, u8
, u16
, u16
, void *, u16
);
99 fn
= usbnet_read_cmd_nopm
;
101 ret
= fn(dev
, USB_VENDOR_REQUEST_READ_REGISTER
, USB_DIR_IN
102 | USB_TYPE_VENDOR
| USB_RECIP_DEVICE
,
104 if (unlikely(ret
< 0))
105 netdev_warn(dev
->net
, "Failed to read reg index 0x%08x: %d\n",
114 static int __must_check
__smsc75xx_write_reg(struct usbnet
*dev
, u32 index
,
119 int (*fn
)(struct usbnet
*, u8
, u8
, u16
, u16
, const void *, u16
);
124 fn
= usbnet_write_cmd
;
126 fn
= usbnet_write_cmd_nopm
;
131 ret
= fn(dev
, USB_VENDOR_REQUEST_WRITE_REGISTER
, USB_DIR_OUT
132 | USB_TYPE_VENDOR
| USB_RECIP_DEVICE
,
134 if (unlikely(ret
< 0))
135 netdev_warn(dev
->net
, "Failed to write reg index 0x%08x: %d\n",
141 static int __must_check
smsc75xx_read_reg_nopm(struct usbnet
*dev
, u32 index
,
144 return __smsc75xx_read_reg(dev
, index
, data
, 1);
147 static int __must_check
smsc75xx_write_reg_nopm(struct usbnet
*dev
, u32 index
,
150 return __smsc75xx_write_reg(dev
, index
, data
, 1);
153 static int __must_check
smsc75xx_read_reg(struct usbnet
*dev
, u32 index
,
156 return __smsc75xx_read_reg(dev
, index
, data
, 0);
159 static int __must_check
smsc75xx_write_reg(struct usbnet
*dev
, u32 index
,
162 return __smsc75xx_write_reg(dev
, index
, data
, 0);
165 /* Loop until the read is completed with timeout
166 * called with phy_mutex held */
167 static __must_check
int __smsc75xx_phy_wait_not_busy(struct usbnet
*dev
,
170 unsigned long start_time
= jiffies
;
175 ret
= __smsc75xx_read_reg(dev
, MII_ACCESS
, &val
, in_pm
);
177 netdev_warn(dev
->net
, "Error reading MII_ACCESS\n");
181 if (!(val
& MII_ACCESS_BUSY
))
183 } while (!time_after(jiffies
, start_time
+ HZ
));
188 static int __smsc75xx_mdio_read(struct net_device
*netdev
, int phy_id
, int idx
,
191 struct usbnet
*dev
= netdev_priv(netdev
);
195 mutex_lock(&dev
->phy_mutex
);
197 /* confirm MII not busy */
198 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
200 netdev_warn(dev
->net
, "MII is busy in smsc75xx_mdio_read\n");
204 /* set the address, index & direction (read from PHY) */
205 phy_id
&= dev
->mii
.phy_id_mask
;
206 idx
&= dev
->mii
.reg_num_mask
;
207 addr
= ((phy_id
<< MII_ACCESS_PHY_ADDR_SHIFT
) & MII_ACCESS_PHY_ADDR
)
208 | ((idx
<< MII_ACCESS_REG_ADDR_SHIFT
) & MII_ACCESS_REG_ADDR
)
209 | MII_ACCESS_READ
| MII_ACCESS_BUSY
;
210 ret
= __smsc75xx_write_reg(dev
, MII_ACCESS
, addr
, in_pm
);
212 netdev_warn(dev
->net
, "Error writing MII_ACCESS\n");
216 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
218 netdev_warn(dev
->net
, "Timed out reading MII reg %02X\n", idx
);
222 ret
= __smsc75xx_read_reg(dev
, MII_DATA
, &val
, in_pm
);
224 netdev_warn(dev
->net
, "Error reading MII_DATA\n");
228 ret
= (u16
)(val
& 0xFFFF);
231 mutex_unlock(&dev
->phy_mutex
);
235 static void __smsc75xx_mdio_write(struct net_device
*netdev
, int phy_id
,
236 int idx
, int regval
, int in_pm
)
238 struct usbnet
*dev
= netdev_priv(netdev
);
242 mutex_lock(&dev
->phy_mutex
);
244 /* confirm MII not busy */
245 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
247 netdev_warn(dev
->net
, "MII is busy in smsc75xx_mdio_write\n");
252 ret
= __smsc75xx_write_reg(dev
, MII_DATA
, val
, in_pm
);
254 netdev_warn(dev
->net
, "Error writing MII_DATA\n");
258 /* set the address, index & direction (write to PHY) */
259 phy_id
&= dev
->mii
.phy_id_mask
;
260 idx
&= dev
->mii
.reg_num_mask
;
261 addr
= ((phy_id
<< MII_ACCESS_PHY_ADDR_SHIFT
) & MII_ACCESS_PHY_ADDR
)
262 | ((idx
<< MII_ACCESS_REG_ADDR_SHIFT
) & MII_ACCESS_REG_ADDR
)
263 | MII_ACCESS_WRITE
| MII_ACCESS_BUSY
;
264 ret
= __smsc75xx_write_reg(dev
, MII_ACCESS
, addr
, in_pm
);
266 netdev_warn(dev
->net
, "Error writing MII_ACCESS\n");
270 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
272 netdev_warn(dev
->net
, "Timed out writing MII reg %02X\n", idx
);
277 mutex_unlock(&dev
->phy_mutex
);
280 static int smsc75xx_mdio_read_nopm(struct net_device
*netdev
, int phy_id
,
283 return __smsc75xx_mdio_read(netdev
, phy_id
, idx
, 1);
286 static void smsc75xx_mdio_write_nopm(struct net_device
*netdev
, int phy_id
,
289 __smsc75xx_mdio_write(netdev
, phy_id
, idx
, regval
, 1);
292 static int smsc75xx_mdio_read(struct net_device
*netdev
, int phy_id
, int idx
)
294 return __smsc75xx_mdio_read(netdev
, phy_id
, idx
, 0);
297 static void smsc75xx_mdio_write(struct net_device
*netdev
, int phy_id
, int idx
,
300 __smsc75xx_mdio_write(netdev
, phy_id
, idx
, regval
, 0);
303 static int smsc75xx_wait_eeprom(struct usbnet
*dev
)
305 unsigned long start_time
= jiffies
;
310 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &val
);
312 netdev_warn(dev
->net
, "Error reading E2P_CMD\n");
316 if (!(val
& E2P_CMD_BUSY
) || (val
& E2P_CMD_TIMEOUT
))
319 } while (!time_after(jiffies
, start_time
+ HZ
));
321 if (val
& (E2P_CMD_TIMEOUT
| E2P_CMD_BUSY
)) {
322 netdev_warn(dev
->net
, "EEPROM read operation timeout\n");
329 static int smsc75xx_eeprom_confirm_not_busy(struct usbnet
*dev
)
331 unsigned long start_time
= jiffies
;
336 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &val
);
338 netdev_warn(dev
->net
, "Error reading E2P_CMD\n");
342 if (!(val
& E2P_CMD_BUSY
))
346 } while (!time_after(jiffies
, start_time
+ HZ
));
348 netdev_warn(dev
->net
, "EEPROM is busy\n");
352 static int smsc75xx_read_eeprom(struct usbnet
*dev
, u32 offset
, u32 length
,
361 ret
= smsc75xx_eeprom_confirm_not_busy(dev
);
365 for (i
= 0; i
< length
; i
++) {
366 val
= E2P_CMD_BUSY
| E2P_CMD_READ
| (offset
& E2P_CMD_ADDR
);
367 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
369 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
373 ret
= smsc75xx_wait_eeprom(dev
);
377 ret
= smsc75xx_read_reg(dev
, E2P_DATA
, &val
);
379 netdev_warn(dev
->net
, "Error reading E2P_DATA\n");
383 data
[i
] = val
& 0xFF;
390 static int smsc75xx_write_eeprom(struct usbnet
*dev
, u32 offset
, u32 length
,
399 ret
= smsc75xx_eeprom_confirm_not_busy(dev
);
403 /* Issue write/erase enable command */
404 val
= E2P_CMD_BUSY
| E2P_CMD_EWEN
;
405 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
407 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
411 ret
= smsc75xx_wait_eeprom(dev
);
415 for (i
= 0; i
< length
; i
++) {
417 /* Fill data register */
419 ret
= smsc75xx_write_reg(dev
, E2P_DATA
, val
);
421 netdev_warn(dev
->net
, "Error writing E2P_DATA\n");
425 /* Send "write" command */
426 val
= E2P_CMD_BUSY
| E2P_CMD_WRITE
| (offset
& E2P_CMD_ADDR
);
427 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
429 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
433 ret
= smsc75xx_wait_eeprom(dev
);
443 static int smsc75xx_dataport_wait_not_busy(struct usbnet
*dev
)
447 for (i
= 0; i
< 100; i
++) {
449 ret
= smsc75xx_read_reg(dev
, DP_SEL
, &dp_sel
);
451 netdev_warn(dev
->net
, "Error reading DP_SEL\n");
455 if (dp_sel
& DP_SEL_DPRDY
)
461 netdev_warn(dev
->net
, "smsc75xx_dataport_wait_not_busy timed out\n");
466 static int smsc75xx_dataport_write(struct usbnet
*dev
, u32 ram_select
, u32 addr
,
467 u32 length
, u32
*buf
)
469 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
473 mutex_lock(&pdata
->dataport_mutex
);
475 ret
= smsc75xx_dataport_wait_not_busy(dev
);
477 netdev_warn(dev
->net
, "smsc75xx_dataport_write busy on entry\n");
481 ret
= smsc75xx_read_reg(dev
, DP_SEL
, &dp_sel
);
483 netdev_warn(dev
->net
, "Error reading DP_SEL\n");
487 dp_sel
&= ~DP_SEL_RSEL
;
488 dp_sel
|= ram_select
;
489 ret
= smsc75xx_write_reg(dev
, DP_SEL
, dp_sel
);
491 netdev_warn(dev
->net
, "Error writing DP_SEL\n");
495 for (i
= 0; i
< length
; i
++) {
496 ret
= smsc75xx_write_reg(dev
, DP_ADDR
, addr
+ i
);
498 netdev_warn(dev
->net
, "Error writing DP_ADDR\n");
502 ret
= smsc75xx_write_reg(dev
, DP_DATA
, buf
[i
]);
504 netdev_warn(dev
->net
, "Error writing DP_DATA\n");
508 ret
= smsc75xx_write_reg(dev
, DP_CMD
, DP_CMD_WRITE
);
510 netdev_warn(dev
->net
, "Error writing DP_CMD\n");
514 ret
= smsc75xx_dataport_wait_not_busy(dev
);
516 netdev_warn(dev
->net
, "smsc75xx_dataport_write timeout\n");
522 mutex_unlock(&pdata
->dataport_mutex
);
526 /* returns hash bit number for given MAC address */
527 static u32
smsc75xx_hash(char addr
[ETH_ALEN
])
529 return (ether_crc(ETH_ALEN
, addr
) >> 23) & 0x1ff;
532 static void smsc75xx_deferred_multicast_write(struct work_struct
*param
)
534 struct smsc75xx_priv
*pdata
=
535 container_of(param
, struct smsc75xx_priv
, set_multicast
);
536 struct usbnet
*dev
= pdata
->dev
;
539 netif_dbg(dev
, drv
, dev
->net
, "deferred multicast write 0x%08x\n",
542 smsc75xx_dataport_write(dev
, DP_SEL_VHF
, DP_SEL_VHF_VLAN_LEN
,
543 DP_SEL_VHF_HASH_LEN
, pdata
->multicast_hash_table
);
545 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
547 netdev_warn(dev
->net
, "Error writing RFE_CRL\n");
550 static void smsc75xx_set_multicast(struct net_device
*netdev
)
552 struct usbnet
*dev
= netdev_priv(netdev
);
553 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
557 spin_lock_irqsave(&pdata
->rfe_ctl_lock
, flags
);
560 ~(RFE_CTL_AU
| RFE_CTL_AM
| RFE_CTL_DPF
| RFE_CTL_MHF
);
561 pdata
->rfe_ctl
|= RFE_CTL_AB
;
563 for (i
= 0; i
< DP_SEL_VHF_HASH_LEN
; i
++)
564 pdata
->multicast_hash_table
[i
] = 0;
566 if (dev
->net
->flags
& IFF_PROMISC
) {
567 netif_dbg(dev
, drv
, dev
->net
, "promiscuous mode enabled\n");
568 pdata
->rfe_ctl
|= RFE_CTL_AM
| RFE_CTL_AU
;
569 } else if (dev
->net
->flags
& IFF_ALLMULTI
) {
570 netif_dbg(dev
, drv
, dev
->net
, "receive all multicast enabled\n");
571 pdata
->rfe_ctl
|= RFE_CTL_AM
| RFE_CTL_DPF
;
572 } else if (!netdev_mc_empty(dev
->net
)) {
573 struct netdev_hw_addr
*ha
;
575 netif_dbg(dev
, drv
, dev
->net
, "receive multicast hash filter\n");
577 pdata
->rfe_ctl
|= RFE_CTL_MHF
| RFE_CTL_DPF
;
579 netdev_for_each_mc_addr(ha
, netdev
) {
580 u32 bitnum
= smsc75xx_hash(ha
->addr
);
581 pdata
->multicast_hash_table
[bitnum
/ 32] |=
582 (1 << (bitnum
% 32));
585 netif_dbg(dev
, drv
, dev
->net
, "receive own packets only\n");
586 pdata
->rfe_ctl
|= RFE_CTL_DPF
;
589 spin_unlock_irqrestore(&pdata
->rfe_ctl_lock
, flags
);
591 /* defer register writes to a sleepable context */
592 schedule_work(&pdata
->set_multicast
);
595 static int smsc75xx_update_flowcontrol(struct usbnet
*dev
, u8 duplex
,
596 u16 lcladv
, u16 rmtadv
)
598 u32 flow
= 0, fct_flow
= 0;
601 if (duplex
== DUPLEX_FULL
) {
602 u8 cap
= mii_resolve_flowctrl_fdx(lcladv
, rmtadv
);
604 if (cap
& FLOW_CTRL_TX
) {
605 flow
= (FLOW_TX_FCEN
| 0xFFFF);
606 /* set fct_flow thresholds to 20% and 80% */
607 fct_flow
= (8 << 8) | 32;
610 if (cap
& FLOW_CTRL_RX
)
611 flow
|= FLOW_RX_FCEN
;
613 netif_dbg(dev
, link
, dev
->net
, "rx pause %s, tx pause %s\n",
614 (cap
& FLOW_CTRL_RX
? "enabled" : "disabled"),
615 (cap
& FLOW_CTRL_TX
? "enabled" : "disabled"));
617 netif_dbg(dev
, link
, dev
->net
, "half duplex\n");
620 ret
= smsc75xx_write_reg(dev
, FLOW
, flow
);
622 netdev_warn(dev
->net
, "Error writing FLOW\n");
626 ret
= smsc75xx_write_reg(dev
, FCT_FLOW
, fct_flow
);
628 netdev_warn(dev
->net
, "Error writing FCT_FLOW\n");
635 static int smsc75xx_link_reset(struct usbnet
*dev
)
637 struct mii_if_info
*mii
= &dev
->mii
;
638 struct ethtool_cmd ecmd
= { .cmd
= ETHTOOL_GSET
};
642 /* write to clear phy interrupt status */
643 smsc75xx_mdio_write(dev
->net
, mii
->phy_id
, PHY_INT_SRC
,
644 PHY_INT_SRC_CLEAR_ALL
);
646 ret
= smsc75xx_write_reg(dev
, INT_STS
, INT_STS_CLEAR_ALL
);
648 netdev_warn(dev
->net
, "Error writing INT_STS\n");
652 mii_check_media(mii
, 1, 1);
653 mii_ethtool_gset(&dev
->mii
, &ecmd
);
654 lcladv
= smsc75xx_mdio_read(dev
->net
, mii
->phy_id
, MII_ADVERTISE
);
655 rmtadv
= smsc75xx_mdio_read(dev
->net
, mii
->phy_id
, MII_LPA
);
657 netif_dbg(dev
, link
, dev
->net
, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
658 ethtool_cmd_speed(&ecmd
), ecmd
.duplex
, lcladv
, rmtadv
);
660 return smsc75xx_update_flowcontrol(dev
, ecmd
.duplex
, lcladv
, rmtadv
);
663 static void smsc75xx_status(struct usbnet
*dev
, struct urb
*urb
)
667 if (urb
->actual_length
!= 4) {
668 netdev_warn(dev
->net
, "unexpected urb length %d\n",
673 memcpy(&intdata
, urb
->transfer_buffer
, 4);
674 le32_to_cpus(&intdata
);
676 netif_dbg(dev
, link
, dev
->net
, "intdata: 0x%08X\n", intdata
);
678 if (intdata
& INT_ENP_PHY_INT
)
679 usbnet_defer_kevent(dev
, EVENT_LINK_RESET
);
681 netdev_warn(dev
->net
, "unexpected interrupt, intdata=0x%08X\n",
685 static int smsc75xx_ethtool_get_eeprom_len(struct net_device
*net
)
687 return MAX_EEPROM_SIZE
;
690 static int smsc75xx_ethtool_get_eeprom(struct net_device
*netdev
,
691 struct ethtool_eeprom
*ee
, u8
*data
)
693 struct usbnet
*dev
= netdev_priv(netdev
);
695 ee
->magic
= LAN75XX_EEPROM_MAGIC
;
697 return smsc75xx_read_eeprom(dev
, ee
->offset
, ee
->len
, data
);
700 static int smsc75xx_ethtool_set_eeprom(struct net_device
*netdev
,
701 struct ethtool_eeprom
*ee
, u8
*data
)
703 struct usbnet
*dev
= netdev_priv(netdev
);
705 if (ee
->magic
!= LAN75XX_EEPROM_MAGIC
) {
706 netdev_warn(dev
->net
, "EEPROM: magic value mismatch: 0x%x\n",
711 return smsc75xx_write_eeprom(dev
, ee
->offset
, ee
->len
, data
);
714 static void smsc75xx_ethtool_get_wol(struct net_device
*net
,
715 struct ethtool_wolinfo
*wolinfo
)
717 struct usbnet
*dev
= netdev_priv(net
);
718 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
720 wolinfo
->supported
= SUPPORTED_WAKE
;
721 wolinfo
->wolopts
= pdata
->wolopts
;
724 static int smsc75xx_ethtool_set_wol(struct net_device
*net
,
725 struct ethtool_wolinfo
*wolinfo
)
727 struct usbnet
*dev
= netdev_priv(net
);
728 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
731 pdata
->wolopts
= wolinfo
->wolopts
& SUPPORTED_WAKE
;
733 ret
= device_set_wakeup_enable(&dev
->udev
->dev
, pdata
->wolopts
);
735 netdev_warn(dev
->net
, "device_set_wakeup_enable error %d\n", ret
);
740 static const struct ethtool_ops smsc75xx_ethtool_ops
= {
741 .get_link
= usbnet_get_link
,
742 .nway_reset
= usbnet_nway_reset
,
743 .get_drvinfo
= usbnet_get_drvinfo
,
744 .get_msglevel
= usbnet_get_msglevel
,
745 .set_msglevel
= usbnet_set_msglevel
,
746 .get_settings
= usbnet_get_settings
,
747 .set_settings
= usbnet_set_settings
,
748 .get_eeprom_len
= smsc75xx_ethtool_get_eeprom_len
,
749 .get_eeprom
= smsc75xx_ethtool_get_eeprom
,
750 .set_eeprom
= smsc75xx_ethtool_set_eeprom
,
751 .get_wol
= smsc75xx_ethtool_get_wol
,
752 .set_wol
= smsc75xx_ethtool_set_wol
,
755 static int smsc75xx_ioctl(struct net_device
*netdev
, struct ifreq
*rq
, int cmd
)
757 struct usbnet
*dev
= netdev_priv(netdev
);
759 if (!netif_running(netdev
))
762 return generic_mii_ioctl(&dev
->mii
, if_mii(rq
), cmd
, NULL
);
765 static void smsc75xx_init_mac_address(struct usbnet
*dev
)
767 /* try reading mac address from EEPROM */
768 if (smsc75xx_read_eeprom(dev
, EEPROM_MAC_OFFSET
, ETH_ALEN
,
769 dev
->net
->dev_addr
) == 0) {
770 if (is_valid_ether_addr(dev
->net
->dev_addr
)) {
771 /* eeprom values are valid so use them */
772 netif_dbg(dev
, ifup
, dev
->net
,
773 "MAC address read from EEPROM\n");
778 /* no eeprom, or eeprom values are invalid. generate random MAC */
779 eth_hw_addr_random(dev
->net
);
780 netif_dbg(dev
, ifup
, dev
->net
, "MAC address set to eth_random_addr\n");
783 static int smsc75xx_set_mac_address(struct usbnet
*dev
)
785 u32 addr_lo
= dev
->net
->dev_addr
[0] | dev
->net
->dev_addr
[1] << 8 |
786 dev
->net
->dev_addr
[2] << 16 | dev
->net
->dev_addr
[3] << 24;
787 u32 addr_hi
= dev
->net
->dev_addr
[4] | dev
->net
->dev_addr
[5] << 8;
789 int ret
= smsc75xx_write_reg(dev
, RX_ADDRH
, addr_hi
);
791 netdev_warn(dev
->net
, "Failed to write RX_ADDRH: %d\n", ret
);
795 ret
= smsc75xx_write_reg(dev
, RX_ADDRL
, addr_lo
);
797 netdev_warn(dev
->net
, "Failed to write RX_ADDRL: %d\n", ret
);
801 addr_hi
|= ADDR_FILTX_FB_VALID
;
802 ret
= smsc75xx_write_reg(dev
, ADDR_FILTX
, addr_hi
);
804 netdev_warn(dev
->net
, "Failed to write ADDR_FILTX: %d\n", ret
);
808 ret
= smsc75xx_write_reg(dev
, ADDR_FILTX
+ 4, addr_lo
);
810 netdev_warn(dev
->net
, "Failed to write ADDR_FILTX+4: %d\n", ret
);
815 static int smsc75xx_phy_initialize(struct usbnet
*dev
)
817 int bmcr
, ret
, timeout
= 0;
819 /* Initialize MII structure */
820 dev
->mii
.dev
= dev
->net
;
821 dev
->mii
.mdio_read
= smsc75xx_mdio_read
;
822 dev
->mii
.mdio_write
= smsc75xx_mdio_write
;
823 dev
->mii
.phy_id_mask
= 0x1f;
824 dev
->mii
.reg_num_mask
= 0x1f;
825 dev
->mii
.supports_gmii
= 1;
826 dev
->mii
.phy_id
= SMSC75XX_INTERNAL_PHY_ID
;
828 /* reset phy and wait for reset to complete */
829 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_BMCR
, BMCR_RESET
);
833 bmcr
= smsc75xx_mdio_read(dev
->net
, dev
->mii
.phy_id
, MII_BMCR
);
835 netdev_warn(dev
->net
, "Error reading MII_BMCR\n");
839 } while ((bmcr
& BMCR_RESET
) && (timeout
< 100));
841 if (timeout
>= 100) {
842 netdev_warn(dev
->net
, "timeout on PHY Reset\n");
846 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_ADVERTISE
,
847 ADVERTISE_ALL
| ADVERTISE_CSMA
| ADVERTISE_PAUSE_CAP
|
848 ADVERTISE_PAUSE_ASYM
);
849 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_CTRL1000
,
852 /* read and write to clear phy interrupt status */
853 ret
= smsc75xx_mdio_read(dev
->net
, dev
->mii
.phy_id
, PHY_INT_SRC
);
855 netdev_warn(dev
->net
, "Error reading PHY_INT_SRC\n");
859 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, PHY_INT_SRC
, 0xffff);
861 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, PHY_INT_MASK
,
862 PHY_INT_MASK_DEFAULT
);
863 mii_nway_restart(&dev
->mii
);
865 netif_dbg(dev
, ifup
, dev
->net
, "phy initialised successfully\n");
869 static int smsc75xx_set_rx_max_frame_length(struct usbnet
*dev
, int size
)
875 ret
= smsc75xx_read_reg(dev
, MAC_RX
, &buf
);
877 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
881 rxenabled
= ((buf
& MAC_RX_RXEN
) != 0);
885 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
887 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
892 /* add 4 to size for FCS */
893 buf
&= ~MAC_RX_MAX_SIZE
;
894 buf
|= (((size
+ 4) << MAC_RX_MAX_SIZE_SHIFT
) & MAC_RX_MAX_SIZE
);
896 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
898 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
904 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
906 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
914 static int smsc75xx_change_mtu(struct net_device
*netdev
, int new_mtu
)
916 struct usbnet
*dev
= netdev_priv(netdev
);
919 if (new_mtu
> MAX_SINGLE_PACKET_SIZE
)
922 ret
= smsc75xx_set_rx_max_frame_length(dev
, new_mtu
+ ETH_HLEN
);
924 netdev_warn(dev
->net
, "Failed to set mac rx frame length\n");
928 return usbnet_change_mtu(netdev
, new_mtu
);
931 /* Enable or disable Rx checksum offload engine */
932 static int smsc75xx_set_features(struct net_device
*netdev
,
933 netdev_features_t features
)
935 struct usbnet
*dev
= netdev_priv(netdev
);
936 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
940 spin_lock_irqsave(&pdata
->rfe_ctl_lock
, flags
);
942 if (features
& NETIF_F_RXCSUM
)
943 pdata
->rfe_ctl
|= RFE_CTL_TCPUDP_CKM
| RFE_CTL_IP_CKM
;
945 pdata
->rfe_ctl
&= ~(RFE_CTL_TCPUDP_CKM
| RFE_CTL_IP_CKM
);
947 spin_unlock_irqrestore(&pdata
->rfe_ctl_lock
, flags
);
948 /* it's racing here! */
950 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
952 netdev_warn(dev
->net
, "Error writing RFE_CTL\n");
957 static int smsc75xx_wait_ready(struct usbnet
*dev
, int in_pm
)
965 ret
= __smsc75xx_read_reg(dev
, PMT_CTL
, &buf
, in_pm
);
968 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
972 if (buf
& PMT_CTL_DEV_RDY
)
977 } while (timeout
< 100);
979 netdev_warn(dev
->net
, "timeout waiting for device ready\n");
983 static int smsc75xx_reset(struct usbnet
*dev
)
985 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
987 int ret
= 0, timeout
;
989 netif_dbg(dev
, ifup
, dev
->net
, "entering smsc75xx_reset\n");
991 ret
= smsc75xx_wait_ready(dev
, 0);
993 netdev_warn(dev
->net
, "device not ready in smsc75xx_reset\n");
997 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
999 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1005 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1007 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1014 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1016 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1020 } while ((buf
& HW_CFG_LRST
) && (timeout
< 100));
1022 if (timeout
>= 100) {
1023 netdev_warn(dev
->net
, "timeout on completion of Lite Reset\n");
1027 netif_dbg(dev
, ifup
, dev
->net
, "Lite reset complete, resetting PHY\n");
1029 ret
= smsc75xx_read_reg(dev
, PMT_CTL
, &buf
);
1031 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
1035 buf
|= PMT_CTL_PHY_RST
;
1037 ret
= smsc75xx_write_reg(dev
, PMT_CTL
, buf
);
1039 netdev_warn(dev
->net
, "Failed to write PMT_CTL: %d\n", ret
);
1046 ret
= smsc75xx_read_reg(dev
, PMT_CTL
, &buf
);
1048 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
1052 } while ((buf
& PMT_CTL_PHY_RST
) && (timeout
< 100));
1054 if (timeout
>= 100) {
1055 netdev_warn(dev
->net
, "timeout waiting for PHY Reset\n");
1059 netif_dbg(dev
, ifup
, dev
->net
, "PHY reset complete\n");
1061 ret
= smsc75xx_set_mac_address(dev
);
1063 netdev_warn(dev
->net
, "Failed to set mac address\n");
1067 netif_dbg(dev
, ifup
, dev
->net
, "MAC Address: %pM\n",
1068 dev
->net
->dev_addr
);
1070 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1072 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1076 netif_dbg(dev
, ifup
, dev
->net
, "Read Value from HW_CFG : 0x%08x\n",
1081 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1083 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1087 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1089 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1093 netif_dbg(dev
, ifup
, dev
->net
, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
1098 dev
->rx_urb_size
= MAX_SINGLE_PACKET_SIZE
;
1099 } else if (dev
->udev
->speed
== USB_SPEED_HIGH
) {
1100 buf
= DEFAULT_HS_BURST_CAP_SIZE
/ HS_USB_PKT_SIZE
;
1101 dev
->rx_urb_size
= DEFAULT_HS_BURST_CAP_SIZE
;
1103 buf
= DEFAULT_FS_BURST_CAP_SIZE
/ FS_USB_PKT_SIZE
;
1104 dev
->rx_urb_size
= DEFAULT_FS_BURST_CAP_SIZE
;
1107 netif_dbg(dev
, ifup
, dev
->net
, "rx_urb_size=%ld\n",
1108 (ulong
)dev
->rx_urb_size
);
1110 ret
= smsc75xx_write_reg(dev
, BURST_CAP
, buf
);
1112 netdev_warn(dev
->net
, "Failed to write BURST_CAP: %d\n", ret
);
1116 ret
= smsc75xx_read_reg(dev
, BURST_CAP
, &buf
);
1118 netdev_warn(dev
->net
, "Failed to read BURST_CAP: %d\n", ret
);
1122 netif_dbg(dev
, ifup
, dev
->net
,
1123 "Read Value from BURST_CAP after writing: 0x%08x\n", buf
);
1125 ret
= smsc75xx_write_reg(dev
, BULK_IN_DLY
, DEFAULT_BULK_IN_DELAY
);
1127 netdev_warn(dev
->net
, "Failed to write BULK_IN_DLY: %d\n", ret
);
1131 ret
= smsc75xx_read_reg(dev
, BULK_IN_DLY
, &buf
);
1133 netdev_warn(dev
->net
, "Failed to read BULK_IN_DLY: %d\n", ret
);
1137 netif_dbg(dev
, ifup
, dev
->net
,
1138 "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf
);
1141 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1143 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1147 netif_dbg(dev
, ifup
, dev
->net
, "HW_CFG: 0x%08x\n", buf
);
1149 buf
|= (HW_CFG_MEF
| HW_CFG_BCE
);
1151 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1153 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1157 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1159 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1163 netif_dbg(dev
, ifup
, dev
->net
, "HW_CFG: 0x%08x\n", buf
);
1166 /* set FIFO sizes */
1167 buf
= (MAX_RX_FIFO_SIZE
- 512) / 512;
1168 ret
= smsc75xx_write_reg(dev
, FCT_RX_FIFO_END
, buf
);
1170 netdev_warn(dev
->net
, "Failed to write FCT_RX_FIFO_END: %d\n", ret
);
1174 netif_dbg(dev
, ifup
, dev
->net
, "FCT_RX_FIFO_END set to 0x%08x\n", buf
);
1176 buf
= (MAX_TX_FIFO_SIZE
- 512) / 512;
1177 ret
= smsc75xx_write_reg(dev
, FCT_TX_FIFO_END
, buf
);
1179 netdev_warn(dev
->net
, "Failed to write FCT_TX_FIFO_END: %d\n", ret
);
1183 netif_dbg(dev
, ifup
, dev
->net
, "FCT_TX_FIFO_END set to 0x%08x\n", buf
);
1185 ret
= smsc75xx_write_reg(dev
, INT_STS
, INT_STS_CLEAR_ALL
);
1187 netdev_warn(dev
->net
, "Failed to write INT_STS: %d\n", ret
);
1191 ret
= smsc75xx_read_reg(dev
, ID_REV
, &buf
);
1193 netdev_warn(dev
->net
, "Failed to read ID_REV: %d\n", ret
);
1197 netif_dbg(dev
, ifup
, dev
->net
, "ID_REV = 0x%08x\n", buf
);
1199 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &buf
);
1201 netdev_warn(dev
->net
, "Failed to read E2P_CMD: %d\n", ret
);
1205 /* only set default GPIO/LED settings if no EEPROM is detected */
1206 if (!(buf
& E2P_CMD_LOADED
)) {
1207 ret
= smsc75xx_read_reg(dev
, LED_GPIO_CFG
, &buf
);
1209 netdev_warn(dev
->net
, "Failed to read LED_GPIO_CFG: %d\n", ret
);
1213 buf
&= ~(LED_GPIO_CFG_LED2_FUN_SEL
| LED_GPIO_CFG_LED10_FUN_SEL
);
1214 buf
|= LED_GPIO_CFG_LEDGPIO_EN
| LED_GPIO_CFG_LED2_FUN_SEL
;
1216 ret
= smsc75xx_write_reg(dev
, LED_GPIO_CFG
, buf
);
1218 netdev_warn(dev
->net
, "Failed to write LED_GPIO_CFG: %d\n", ret
);
1223 ret
= smsc75xx_write_reg(dev
, FLOW
, 0);
1225 netdev_warn(dev
->net
, "Failed to write FLOW: %d\n", ret
);
1229 ret
= smsc75xx_write_reg(dev
, FCT_FLOW
, 0);
1231 netdev_warn(dev
->net
, "Failed to write FCT_FLOW: %d\n", ret
);
1235 /* Don't need rfe_ctl_lock during initialisation */
1236 ret
= smsc75xx_read_reg(dev
, RFE_CTL
, &pdata
->rfe_ctl
);
1238 netdev_warn(dev
->net
, "Failed to read RFE_CTL: %d\n", ret
);
1242 pdata
->rfe_ctl
|= RFE_CTL_AB
| RFE_CTL_DPF
;
1244 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
1246 netdev_warn(dev
->net
, "Failed to write RFE_CTL: %d\n", ret
);
1250 ret
= smsc75xx_read_reg(dev
, RFE_CTL
, &pdata
->rfe_ctl
);
1252 netdev_warn(dev
->net
, "Failed to read RFE_CTL: %d\n", ret
);
1256 netif_dbg(dev
, ifup
, dev
->net
, "RFE_CTL set to 0x%08x\n",
1259 /* Enable or disable checksum offload engines */
1260 smsc75xx_set_features(dev
->net
, dev
->net
->features
);
1262 smsc75xx_set_multicast(dev
->net
);
1264 ret
= smsc75xx_phy_initialize(dev
);
1266 netdev_warn(dev
->net
, "Failed to initialize PHY: %d\n", ret
);
1270 ret
= smsc75xx_read_reg(dev
, INT_EP_CTL
, &buf
);
1272 netdev_warn(dev
->net
, "Failed to read INT_EP_CTL: %d\n", ret
);
1276 /* enable PHY interrupts */
1277 buf
|= INT_ENP_PHY_INT
;
1279 ret
= smsc75xx_write_reg(dev
, INT_EP_CTL
, buf
);
1281 netdev_warn(dev
->net
, "Failed to write INT_EP_CTL: %d\n", ret
);
1285 /* allow mac to detect speed and duplex from phy */
1286 ret
= smsc75xx_read_reg(dev
, MAC_CR
, &buf
);
1288 netdev_warn(dev
->net
, "Failed to read MAC_CR: %d\n", ret
);
1292 buf
|= (MAC_CR_ADD
| MAC_CR_ASD
);
1293 ret
= smsc75xx_write_reg(dev
, MAC_CR
, buf
);
1295 netdev_warn(dev
->net
, "Failed to write MAC_CR: %d\n", ret
);
1299 ret
= smsc75xx_read_reg(dev
, MAC_TX
, &buf
);
1301 netdev_warn(dev
->net
, "Failed to read MAC_TX: %d\n", ret
);
1307 ret
= smsc75xx_write_reg(dev
, MAC_TX
, buf
);
1309 netdev_warn(dev
->net
, "Failed to write MAC_TX: %d\n", ret
);
1313 netif_dbg(dev
, ifup
, dev
->net
, "MAC_TX set to 0x%08x\n", buf
);
1315 ret
= smsc75xx_read_reg(dev
, FCT_TX_CTL
, &buf
);
1317 netdev_warn(dev
->net
, "Failed to read FCT_TX_CTL: %d\n", ret
);
1321 buf
|= FCT_TX_CTL_EN
;
1323 ret
= smsc75xx_write_reg(dev
, FCT_TX_CTL
, buf
);
1325 netdev_warn(dev
->net
, "Failed to write FCT_TX_CTL: %d\n", ret
);
1329 netif_dbg(dev
, ifup
, dev
->net
, "FCT_TX_CTL set to 0x%08x\n", buf
);
1331 ret
= smsc75xx_set_rx_max_frame_length(dev
, dev
->net
->mtu
+ ETH_HLEN
);
1333 netdev_warn(dev
->net
, "Failed to set max rx frame length\n");
1337 ret
= smsc75xx_read_reg(dev
, MAC_RX
, &buf
);
1339 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
1345 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
1347 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
1351 netif_dbg(dev
, ifup
, dev
->net
, "MAC_RX set to 0x%08x\n", buf
);
1353 ret
= smsc75xx_read_reg(dev
, FCT_RX_CTL
, &buf
);
1355 netdev_warn(dev
->net
, "Failed to read FCT_RX_CTL: %d\n", ret
);
1359 buf
|= FCT_RX_CTL_EN
;
1361 ret
= smsc75xx_write_reg(dev
, FCT_RX_CTL
, buf
);
1363 netdev_warn(dev
->net
, "Failed to write FCT_RX_CTL: %d\n", ret
);
1367 netif_dbg(dev
, ifup
, dev
->net
, "FCT_RX_CTL set to 0x%08x\n", buf
);
1369 netif_dbg(dev
, ifup
, dev
->net
, "smsc75xx_reset, return 0\n");
1373 static const struct net_device_ops smsc75xx_netdev_ops
= {
1374 .ndo_open
= usbnet_open
,
1375 .ndo_stop
= usbnet_stop
,
1376 .ndo_start_xmit
= usbnet_start_xmit
,
1377 .ndo_tx_timeout
= usbnet_tx_timeout
,
1378 .ndo_change_mtu
= smsc75xx_change_mtu
,
1379 .ndo_set_mac_address
= eth_mac_addr
,
1380 .ndo_validate_addr
= eth_validate_addr
,
1381 .ndo_do_ioctl
= smsc75xx_ioctl
,
1382 .ndo_set_rx_mode
= smsc75xx_set_multicast
,
1383 .ndo_set_features
= smsc75xx_set_features
,
1386 static int smsc75xx_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
1388 struct smsc75xx_priv
*pdata
= NULL
;
1391 printk(KERN_INFO SMSC_CHIPNAME
" v" SMSC_DRIVER_VERSION
"\n");
1393 ret
= usbnet_get_endpoints(dev
, intf
);
1395 netdev_warn(dev
->net
, "usbnet_get_endpoints failed: %d\n", ret
);
1399 dev
->data
[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv
),
1402 pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1408 spin_lock_init(&pdata
->rfe_ctl_lock
);
1409 mutex_init(&pdata
->dataport_mutex
);
1411 INIT_WORK(&pdata
->set_multicast
, smsc75xx_deferred_multicast_write
);
1413 if (DEFAULT_TX_CSUM_ENABLE
) {
1414 dev
->net
->features
|= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
;
1415 if (DEFAULT_TSO_ENABLE
)
1416 dev
->net
->features
|= NETIF_F_SG
|
1417 NETIF_F_TSO
| NETIF_F_TSO6
;
1419 if (DEFAULT_RX_CSUM_ENABLE
)
1420 dev
->net
->features
|= NETIF_F_RXCSUM
;
1422 dev
->net
->hw_features
= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
1423 NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
| NETIF_F_RXCSUM
;
1425 ret
= smsc75xx_wait_ready(dev
, 0);
1427 netdev_warn(dev
->net
, "device not ready in smsc75xx_bind\n");
1431 smsc75xx_init_mac_address(dev
);
1433 /* Init all registers */
1434 ret
= smsc75xx_reset(dev
);
1436 netdev_warn(dev
->net
, "smsc75xx_reset error %d\n", ret
);
1440 dev
->net
->netdev_ops
= &smsc75xx_netdev_ops
;
1441 dev
->net
->ethtool_ops
= &smsc75xx_ethtool_ops
;
1442 dev
->net
->flags
|= IFF_MULTICAST
;
1443 dev
->net
->hard_header_len
+= SMSC75XX_TX_OVERHEAD
;
1444 dev
->hard_mtu
= dev
->net
->mtu
+ dev
->net
->hard_header_len
;
1448 static void smsc75xx_unbind(struct usbnet
*dev
, struct usb_interface
*intf
)
1450 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1452 netif_dbg(dev
, ifdown
, dev
->net
, "free pdata\n");
1459 static u16
smsc_crc(const u8
*buffer
, size_t len
)
1461 return bitrev16(crc16(0xFFFF, buffer
, len
));
1464 static int smsc75xx_write_wuff(struct usbnet
*dev
, int filter
, u32 wuf_cfg
,
1467 int cfg_base
= WUF_CFGX
+ filter
* 4;
1468 int mask_base
= WUF_MASKX
+ filter
* 16;
1471 ret
= smsc75xx_write_reg(dev
, cfg_base
, wuf_cfg
);
1473 netdev_warn(dev
->net
, "Error writing WUF_CFGX\n");
1477 ret
= smsc75xx_write_reg(dev
, mask_base
, wuf_mask1
);
1479 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1483 ret
= smsc75xx_write_reg(dev
, mask_base
+ 4, 0);
1485 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1489 ret
= smsc75xx_write_reg(dev
, mask_base
+ 8, 0);
1491 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1495 ret
= smsc75xx_write_reg(dev
, mask_base
+ 12, 0);
1497 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1504 static int smsc75xx_enter_suspend0(struct usbnet
*dev
)
1506 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1510 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1512 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1516 val
&= (~(PMT_CTL_SUS_MODE
| PMT_CTL_PHY_RST
));
1517 val
|= PMT_CTL_SUS_MODE_0
| PMT_CTL_WOL_EN
| PMT_CTL_WUPS
;
1519 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1521 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1525 pdata
->suspend_flags
|= SUSPEND_SUSPEND0
;
1530 static int smsc75xx_enter_suspend1(struct usbnet
*dev
)
1532 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1536 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1538 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1542 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1543 val
|= PMT_CTL_SUS_MODE_1
;
1545 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1547 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1551 /* clear wol status, enable energy detection */
1552 val
&= ~PMT_CTL_WUPS
;
1553 val
|= (PMT_CTL_WUPS_ED
| PMT_CTL_ED_EN
);
1555 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1557 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1561 pdata
->suspend_flags
|= SUSPEND_SUSPEND1
;
1566 static int smsc75xx_enter_suspend2(struct usbnet
*dev
)
1568 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1572 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1574 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1578 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1579 val
|= PMT_CTL_SUS_MODE_2
;
1581 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1583 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1587 pdata
->suspend_flags
|= SUSPEND_SUSPEND2
;
1592 static int smsc75xx_enter_suspend3(struct usbnet
*dev
)
1594 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1598 ret
= smsc75xx_read_reg_nopm(dev
, FCT_RX_CTL
, &val
);
1600 netdev_warn(dev
->net
, "Error reading FCT_RX_CTL\n");
1604 if (val
& FCT_RX_CTL_RXUSED
) {
1605 netdev_dbg(dev
->net
, "rx fifo not empty in autosuspend\n");
1609 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1611 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1615 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1616 val
|= PMT_CTL_SUS_MODE_3
| PMT_CTL_RES_CLR_WKP_EN
;
1618 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1620 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1624 /* clear wol status */
1625 val
&= ~PMT_CTL_WUPS
;
1626 val
|= PMT_CTL_WUPS_WOL
;
1628 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1630 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1634 pdata
->suspend_flags
|= SUSPEND_SUSPEND3
;
1639 static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet
*dev
, u16 mask
)
1641 struct mii_if_info
*mii
= &dev
->mii
;
1644 netdev_dbg(dev
->net
, "enabling PHY wakeup interrupts\n");
1647 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, PHY_INT_SRC
);
1649 netdev_warn(dev
->net
, "Error reading PHY_INT_SRC\n");
1653 /* enable interrupt source */
1654 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, PHY_INT_MASK
);
1656 netdev_warn(dev
->net
, "Error reading PHY_INT_MASK\n");
1662 smsc75xx_mdio_write_nopm(dev
->net
, mii
->phy_id
, PHY_INT_MASK
, ret
);
1667 static int smsc75xx_link_ok_nopm(struct usbnet
*dev
)
1669 struct mii_if_info
*mii
= &dev
->mii
;
1672 /* first, a dummy read, needed to latch some MII phys */
1673 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, MII_BMSR
);
1675 netdev_warn(dev
->net
, "Error reading MII_BMSR\n");
1679 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, MII_BMSR
);
1681 netdev_warn(dev
->net
, "Error reading MII_BMSR\n");
1685 return !!(ret
& BMSR_LSTATUS
);
1688 static int smsc75xx_autosuspend(struct usbnet
*dev
, u32 link_up
)
1692 if (!netif_running(dev
->net
)) {
1693 /* interface is ifconfig down so fully power down hw */
1694 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND2\n");
1695 return smsc75xx_enter_suspend2(dev
);
1699 /* link is down so enter EDPD mode */
1700 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND1\n");
1702 /* enable PHY wakeup events for if cable is attached */
1703 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1704 PHY_INT_MASK_ANEG_COMP
);
1706 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1710 netdev_info(dev
->net
, "entering SUSPEND1 mode\n");
1711 return smsc75xx_enter_suspend1(dev
);
1714 /* enable PHY wakeup events so we remote wakeup if cable is pulled */
1715 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1716 PHY_INT_MASK_LINK_DOWN
);
1718 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1722 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND3\n");
1723 return smsc75xx_enter_suspend3(dev
);
1726 static int smsc75xx_suspend(struct usb_interface
*intf
, pm_message_t message
)
1728 struct usbnet
*dev
= usb_get_intfdata(intf
);
1729 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1733 ret
= usbnet_suspend(intf
, message
);
1735 netdev_warn(dev
->net
, "usbnet_suspend error\n");
1739 if (pdata
->suspend_flags
) {
1740 netdev_warn(dev
->net
, "error during last resume\n");
1741 pdata
->suspend_flags
= 0;
1744 /* determine if link is up using only _nopm functions */
1745 link_up
= smsc75xx_link_ok_nopm(dev
);
1747 if (message
.event
== PM_EVENT_AUTO_SUSPEND
) {
1748 ret
= smsc75xx_autosuspend(dev
, link_up
);
1752 /* if we get this far we're not autosuspending */
1753 /* if no wol options set, or if link is down and we're not waking on
1754 * PHY activity, enter lowest power SUSPEND2 mode
1756 if (!(pdata
->wolopts
& SUPPORTED_WAKE
) ||
1757 !(link_up
|| (pdata
->wolopts
& WAKE_PHY
))) {
1758 netdev_info(dev
->net
, "entering SUSPEND2 mode\n");
1760 /* disable energy detect (link up) & wake up events */
1761 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1763 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1767 val
&= ~(WUCSR_MPEN
| WUCSR_WUEN
);
1769 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1771 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1775 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1777 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1781 val
&= ~(PMT_CTL_ED_EN
| PMT_CTL_WOL_EN
);
1783 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1785 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1789 ret
= smsc75xx_enter_suspend2(dev
);
1793 if (pdata
->wolopts
& WAKE_PHY
) {
1794 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1795 (PHY_INT_MASK_ANEG_COMP
| PHY_INT_MASK_LINK_DOWN
));
1797 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1801 /* if link is down then configure EDPD and enter SUSPEND1,
1802 * otherwise enter SUSPEND0 below
1805 struct mii_if_info
*mii
= &dev
->mii
;
1806 netdev_info(dev
->net
, "entering SUSPEND1 mode\n");
1808 /* enable energy detect power-down mode */
1809 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
,
1812 netdev_warn(dev
->net
, "Error reading PHY_MODE_CTRL_STS\n");
1816 ret
|= MODE_CTRL_STS_EDPWRDOWN
;
1818 smsc75xx_mdio_write_nopm(dev
->net
, mii
->phy_id
,
1819 PHY_MODE_CTRL_STS
, ret
);
1821 /* enter SUSPEND1 mode */
1822 ret
= smsc75xx_enter_suspend1(dev
);
1827 if (pdata
->wolopts
& (WAKE_MCAST
| WAKE_ARP
)) {
1830 /* disable all filters */
1831 for (i
= 0; i
< WUF_NUM
; i
++) {
1832 ret
= smsc75xx_write_reg_nopm(dev
, WUF_CFGX
+ i
* 4, 0);
1834 netdev_warn(dev
->net
, "Error writing WUF_CFGX\n");
1839 if (pdata
->wolopts
& WAKE_MCAST
) {
1840 const u8 mcast
[] = {0x01, 0x00, 0x5E};
1841 netdev_info(dev
->net
, "enabling multicast detection\n");
1843 val
= WUF_CFGX_EN
| WUF_CFGX_ATYPE_MULTICAST
1844 | smsc_crc(mcast
, 3);
1845 ret
= smsc75xx_write_wuff(dev
, filter
++, val
, 0x0007);
1847 netdev_warn(dev
->net
, "Error writing wakeup filter\n");
1852 if (pdata
->wolopts
& WAKE_ARP
) {
1853 const u8 arp
[] = {0x08, 0x06};
1854 netdev_info(dev
->net
, "enabling ARP detection\n");
1856 val
= WUF_CFGX_EN
| WUF_CFGX_ATYPE_ALL
| (0x0C << 16)
1858 ret
= smsc75xx_write_wuff(dev
, filter
++, val
, 0x0003);
1860 netdev_warn(dev
->net
, "Error writing wakeup filter\n");
1865 /* clear any pending pattern match packet status */
1866 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1868 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1874 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1876 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1880 netdev_info(dev
->net
, "enabling packet match detection\n");
1881 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1883 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1889 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1891 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1895 netdev_info(dev
->net
, "disabling packet match detection\n");
1896 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1898 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1904 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1906 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1911 /* disable magic, bcast & unicast wakeup sources */
1912 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1914 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1918 val
&= ~(WUCSR_MPEN
| WUCSR_BCST_EN
| WUCSR_PFDA_EN
);
1920 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1922 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1926 if (pdata
->wolopts
& WAKE_PHY
) {
1927 netdev_info(dev
->net
, "enabling PHY wakeup\n");
1929 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1931 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1935 /* clear wol status, enable energy detection */
1936 val
&= ~PMT_CTL_WUPS
;
1937 val
|= (PMT_CTL_WUPS_ED
| PMT_CTL_ED_EN
);
1939 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1941 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1946 if (pdata
->wolopts
& WAKE_MAGIC
) {
1947 netdev_info(dev
->net
, "enabling magic packet wakeup\n");
1948 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1950 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1954 /* clear any pending magic packet status */
1955 val
|= WUCSR_MPR
| WUCSR_MPEN
;
1957 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1959 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1964 if (pdata
->wolopts
& WAKE_BCAST
) {
1965 netdev_info(dev
->net
, "enabling broadcast detection\n");
1966 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1968 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1972 val
|= WUCSR_BCAST_FR
| WUCSR_BCST_EN
;
1974 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1976 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1981 if (pdata
->wolopts
& WAKE_UCAST
) {
1982 netdev_info(dev
->net
, "enabling unicast detection\n");
1983 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1985 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1989 val
|= WUCSR_WUFR
| WUCSR_PFDA_EN
;
1991 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1993 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1998 /* enable receiver to enable frame reception */
1999 ret
= smsc75xx_read_reg_nopm(dev
, MAC_RX
, &val
);
2001 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
2007 ret
= smsc75xx_write_reg_nopm(dev
, MAC_RX
, val
);
2009 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
2013 /* some wol options are enabled, so enter SUSPEND0 */
2014 netdev_info(dev
->net
, "entering SUSPEND0 mode\n");
2015 ret
= smsc75xx_enter_suspend0(dev
);
2019 * TODO: resume() might need to handle the suspend failure
2022 if (ret
&& PMSG_IS_AUTO(message
))
2023 usbnet_resume(intf
);
2027 static int smsc75xx_resume(struct usb_interface
*intf
)
2029 struct usbnet
*dev
= usb_get_intfdata(intf
);
2030 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
2031 u8 suspend_flags
= pdata
->suspend_flags
;
2035 netdev_dbg(dev
->net
, "resume suspend_flags=0x%02x\n", suspend_flags
);
2037 /* do this first to ensure it's cleared even in error case */
2038 pdata
->suspend_flags
= 0;
2040 if (suspend_flags
& SUSPEND_ALLMODES
) {
2041 /* Disable wakeup sources */
2042 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
2044 netdev_warn(dev
->net
, "Error reading WUCSR\n");
2048 val
&= ~(WUCSR_WUEN
| WUCSR_MPEN
| WUCSR_PFDA_EN
2051 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
2053 netdev_warn(dev
->net
, "Error writing WUCSR\n");
2057 /* clear wake-up status */
2058 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
2060 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
2064 val
&= ~PMT_CTL_WOL_EN
;
2065 val
|= PMT_CTL_WUPS
;
2067 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
2069 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
2074 if (suspend_flags
& SUSPEND_SUSPEND2
) {
2075 netdev_info(dev
->net
, "resuming from SUSPEND2\n");
2077 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
2079 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
2083 val
|= PMT_CTL_PHY_PWRUP
;
2085 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
2087 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
2092 ret
= smsc75xx_wait_ready(dev
, 1);
2094 netdev_warn(dev
->net
, "device not ready in smsc75xx_resume\n");
2098 return usbnet_resume(intf
);
2101 static void smsc75xx_rx_csum_offload(struct usbnet
*dev
, struct sk_buff
*skb
,
2102 u32 rx_cmd_a
, u32 rx_cmd_b
)
2104 if (!(dev
->net
->features
& NETIF_F_RXCSUM
) ||
2105 unlikely(rx_cmd_a
& RX_CMD_A_LCSM
)) {
2106 skb
->ip_summed
= CHECKSUM_NONE
;
2108 skb
->csum
= ntohs((u16
)(rx_cmd_b
>> RX_CMD_B_CSUM_SHIFT
));
2109 skb
->ip_summed
= CHECKSUM_COMPLETE
;
2113 static int smsc75xx_rx_fixup(struct usbnet
*dev
, struct sk_buff
*skb
)
2115 while (skb
->len
> 0) {
2116 u32 rx_cmd_a
, rx_cmd_b
, align_count
, size
;
2117 struct sk_buff
*ax_skb
;
2118 unsigned char *packet
;
2120 memcpy(&rx_cmd_a
, skb
->data
, sizeof(rx_cmd_a
));
2121 le32_to_cpus(&rx_cmd_a
);
2124 memcpy(&rx_cmd_b
, skb
->data
, sizeof(rx_cmd_b
));
2125 le32_to_cpus(&rx_cmd_b
);
2126 skb_pull(skb
, 4 + RXW_PADDING
);
2130 /* get the packet length */
2131 size
= (rx_cmd_a
& RX_CMD_A_LEN
) - RXW_PADDING
;
2132 align_count
= (4 - ((size
+ RXW_PADDING
) % 4)) % 4;
2134 if (unlikely(rx_cmd_a
& RX_CMD_A_RED
)) {
2135 netif_dbg(dev
, rx_err
, dev
->net
,
2136 "Error rx_cmd_a=0x%08x\n", rx_cmd_a
);
2137 dev
->net
->stats
.rx_errors
++;
2138 dev
->net
->stats
.rx_dropped
++;
2140 if (rx_cmd_a
& RX_CMD_A_FCS
)
2141 dev
->net
->stats
.rx_crc_errors
++;
2142 else if (rx_cmd_a
& (RX_CMD_A_LONG
| RX_CMD_A_RUNT
))
2143 dev
->net
->stats
.rx_frame_errors
++;
2145 /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
2146 if (unlikely(size
> (MAX_SINGLE_PACKET_SIZE
+ ETH_HLEN
+ 12))) {
2147 netif_dbg(dev
, rx_err
, dev
->net
,
2148 "size err rx_cmd_a=0x%08x\n",
2153 /* last frame in this batch */
2154 if (skb
->len
== size
) {
2155 smsc75xx_rx_csum_offload(dev
, skb
, rx_cmd_a
,
2158 skb_trim(skb
, skb
->len
- 4); /* remove fcs */
2159 skb
->truesize
= size
+ sizeof(struct sk_buff
);
2164 ax_skb
= skb_clone(skb
, GFP_ATOMIC
);
2165 if (unlikely(!ax_skb
)) {
2166 netdev_warn(dev
->net
, "Error allocating skb\n");
2171 ax_skb
->data
= packet
;
2172 skb_set_tail_pointer(ax_skb
, size
);
2174 smsc75xx_rx_csum_offload(dev
, ax_skb
, rx_cmd_a
,
2177 skb_trim(ax_skb
, ax_skb
->len
- 4); /* remove fcs */
2178 ax_skb
->truesize
= size
+ sizeof(struct sk_buff
);
2180 usbnet_skb_return(dev
, ax_skb
);
2183 skb_pull(skb
, size
);
2185 /* padding bytes before the next frame starts */
2187 skb_pull(skb
, align_count
);
2190 if (unlikely(skb
->len
< 0)) {
2191 netdev_warn(dev
->net
, "invalid rx length<0 %d\n", skb
->len
);
2198 static struct sk_buff
*smsc75xx_tx_fixup(struct usbnet
*dev
,
2199 struct sk_buff
*skb
, gfp_t flags
)
2201 u32 tx_cmd_a
, tx_cmd_b
;
2205 if (skb_headroom(skb
) < SMSC75XX_TX_OVERHEAD
) {
2206 struct sk_buff
*skb2
=
2207 skb_copy_expand(skb
, SMSC75XX_TX_OVERHEAD
, 0, flags
);
2208 dev_kfree_skb_any(skb
);
2214 tx_cmd_a
= (u32
)(skb
->len
& TX_CMD_A_LEN
) | TX_CMD_A_FCS
;
2216 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
2217 tx_cmd_a
|= TX_CMD_A_IPE
| TX_CMD_A_TPE
;
2219 if (skb_is_gso(skb
)) {
2220 u16 mss
= max(skb_shinfo(skb
)->gso_size
, TX_MSS_MIN
);
2221 tx_cmd_b
= (mss
<< TX_CMD_B_MSS_SHIFT
) & TX_CMD_B_MSS
;
2223 tx_cmd_a
|= TX_CMD_A_LSO
;
2229 cpu_to_le32s(&tx_cmd_b
);
2230 memcpy(skb
->data
, &tx_cmd_b
, 4);
2233 cpu_to_le32s(&tx_cmd_a
);
2234 memcpy(skb
->data
, &tx_cmd_a
, 4);
2239 static int smsc75xx_manage_power(struct usbnet
*dev
, int on
)
2241 dev
->intf
->needs_remote_wakeup
= on
;
2245 static const struct driver_info smsc75xx_info
= {
2246 .description
= "smsc75xx USB 2.0 Gigabit Ethernet",
2247 .bind
= smsc75xx_bind
,
2248 .unbind
= smsc75xx_unbind
,
2249 .link_reset
= smsc75xx_link_reset
,
2250 .reset
= smsc75xx_reset
,
2251 .rx_fixup
= smsc75xx_rx_fixup
,
2252 .tx_fixup
= smsc75xx_tx_fixup
,
2253 .status
= smsc75xx_status
,
2254 .manage_power
= smsc75xx_manage_power
,
2255 .flags
= FLAG_ETHER
| FLAG_SEND_ZLP
| FLAG_LINK_INTR
,
2258 static const struct usb_device_id products
[] = {
2260 /* SMSC7500 USB Gigabit Ethernet Device */
2261 USB_DEVICE(USB_VENDOR_ID_SMSC
, USB_PRODUCT_ID_LAN7500
),
2262 .driver_info
= (unsigned long) &smsc75xx_info
,
2265 /* SMSC7500 USB Gigabit Ethernet Device */
2266 USB_DEVICE(USB_VENDOR_ID_SMSC
, USB_PRODUCT_ID_LAN7505
),
2267 .driver_info
= (unsigned long) &smsc75xx_info
,
2271 MODULE_DEVICE_TABLE(usb
, products
);
2273 static struct usb_driver smsc75xx_driver
= {
2274 .name
= SMSC_CHIPNAME
,
2275 .id_table
= products
,
2276 .probe
= usbnet_probe
,
2277 .suspend
= smsc75xx_suspend
,
2278 .resume
= smsc75xx_resume
,
2279 .reset_resume
= smsc75xx_resume
,
2280 .disconnect
= usbnet_disconnect
,
2281 .disable_hub_initiated_lpm
= 1,
2282 .supports_autosuspend
= 1,
2285 module_usb_driver(smsc75xx_driver
);
2287 MODULE_AUTHOR("Nancy Lin");
2288 MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
2289 MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
2290 MODULE_LICENSE("GPL");