drivers/pinctrl/pinctrl-tegra.h

   1 /*
   2  * Driver for the NVIDIA Tegra pinmux
   3  *
   4  * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms and conditions of the GNU General Public License,
   8  * version 2, as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope it will be useful, but WITHOUT
  11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13  * more details.
  14  */
  15
  16 #ifndef __PINMUX_TEGRA_H__
  17 #define __PINMUX_TEGRA_H__
  18
  19 enum tegra_pinconf_param {
  20         /* argument: tegra_pinconf_pull */
  21         TEGRA_PINCONF_PARAM_PULL,
  22         /* argument: tegra_pinconf_tristate */
  23         TEGRA_PINCONF_PARAM_TRISTATE,
  24         /* argument: Boolean */
  25         TEGRA_PINCONF_PARAM_ENABLE_INPUT,
  26         /* argument: Boolean */
  27         TEGRA_PINCONF_PARAM_OPEN_DRAIN,
  28         /* argument: Boolean */
  29         TEGRA_PINCONF_PARAM_LOCK,
  30         /* argument: Boolean */
  31         TEGRA_PINCONF_PARAM_IORESET,
  32         /* argument: Boolean */
  33         TEGRA_PINCONF_PARAM_RCV_SEL,
  34         /* argument: Boolean */
  35         TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
  36         /* argument: Boolean */
  37         TEGRA_PINCONF_PARAM_SCHMITT,
  38         /* argument: Boolean */
  39         TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
  40         /* argument: Integer, range is HW-dependant */
  41         TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
  42         /* argument: Integer, range is HW-dependant */
  43         TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
  44         /* argument: Integer, range is HW-dependant */
  45         TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
  46         /* argument: Integer, range is HW-dependant */
  47         TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
  48         /* argument: Integer, range is HW-dependant */
  49         TEGRA_PINCONF_PARAM_DRIVE_TYPE,
  50 };
  51
  52 enum tegra_pinconf_pull {
  53         TEGRA_PINCONFIG_PULL_NONE,
  54         TEGRA_PINCONFIG_PULL_DOWN,
  55         TEGRA_PINCONFIG_PULL_UP,
  56 };
  57
  58 enum tegra_pinconf_tristate {
  59         TEGRA_PINCONFIG_DRIVEN,
  60         TEGRA_PINCONFIG_TRISTATE,
  61 };
  62
  63 #define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
  64 #define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
  65 #define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
  66
  67 /**
  68  * struct tegra_function - Tegra pinctrl mux function
  69  * @name: The name of the function, exported to pinctrl core.
  70  * @groups: An array of pin groups that may select this function.
  71  * @ngroups: The number of entries in @groups.
  72  */
  73 struct tegra_function {
  74         const char *name;
  75         const char * const *groups;
  76         unsigned ngroups;
  77 };
  78
  79 /**
  80  * struct tegra_pingroup - Tegra pin group
  81  * @mux_reg:            Mux register offset. -1 if unsupported.
  82  * @mux_bank:           Mux register bank. 0 if unsupported.
  83  * @mux_bit:            Mux register bit. 0 if unsupported.
  84  * @pupd_reg:           Pull-up/down register offset. -1 if unsupported.
  85  * @pupd_bank:          Pull-up/down register bank. 0 if unsupported.
  86  * @pupd_bit:           Pull-up/down register bit. 0 if unsupported.
  87  * @tri_reg:            Tri-state register offset. -1 if unsupported.
  88  * @tri_bank:           Tri-state register bank. 0 if unsupported.
  89  * @tri_bit:            Tri-state register bit. 0 if unsupported.
  90  * @einput_reg:         Enable-input register offset. -1 if unsupported.
  91  * @einput_bank:        Enable-input register bank. 0 if unsupported.
  92  * @einput_bit:         Enable-input register bit. 0 if unsupported.
  93  * @odrain_reg:         Open-drain register offset. -1 if unsupported.
  94  * @odrain_bank:        Open-drain register bank. 0 if unsupported.
  95  * @odrain_bit:         Open-drain register bit. 0 if unsupported.
  96  * @lock_reg:           Lock register offset. -1 if unsupported.
  97  * @lock_bank:          Lock register bank. 0 if unsupported.
  98  * @lock_bit:           Lock register bit. 0 if unsupported.
  99  * @ioreset_reg:        IO reset register offset. -1 if unsupported.
 100  * @ioreset_bank:       IO reset register bank. 0 if unsupported.
 101  * @ioreset_bit:        IO reset register bit. 0 if unsupported.
 102  * @rcv_sel_reg:        Receiver select offset. -1 if unsupported.
 103  * @rcv_sel_bank:       Receiver select bank. 0 if unsupported.
 104  * @rcv_sel_bit:        Receiver select bit. 0 if unsupported.
 105  * @drv_reg:            Drive fields register offset. -1 if unsupported.
 106  *                      This register contains the hsm, schmitt, lpmd, drvdn,
 107  *                      drvup, slwr, and slwf parameters.
 108  * @drv_bank:           Drive fields register bank. 0 if unsupported.
 109  * @hsm_bit:            High Speed Mode register bit. 0 if unsupported.
 110  * @schmitt_bit:        Scmitt register bit. 0 if unsupported.
 111  * @lpmd_bit:           Low Power Mode register bit. 0 if unsupported.
 112  * @drvdn_bit:          Drive Down register bit. 0 if unsupported.
 113  * @drvdn_width:        Drive Down field width. 0 if unsupported.
 114  * @drvup_bit:          Drive Up register bit. 0 if unsupported.
 115  * @drvup_width:        Drive Up field width. 0 if unsupported.
 116  * @slwr_bit:           Slew Rising register bit. 0 if unsupported.
 117  * @slwr_width:         Slew Rising field width. 0 if unsupported.
 118  * @slwf_bit:           Slew Falling register bit. 0 if unsupported.
 119  * @slwf_width:         Slew Falling field width. 0 if unsupported.
 120  * @drvtype_reg:        Drive type fields register offset. -1 if unsupported.
 121  * @drvtype_bank:       Drive type fields register bank. 0 if unsupported.
 122  * @drvtype_bit:        Drive type register bit. 0 if unsupported.
 123  *
 124  * A representation of a group of pins (possibly just one pin) in the Tegra
 125  * pin controller. Each group allows some parameter or parameters to be
 126  * configured. The most common is mux function selection. Many others exist
 127  * such as pull-up/down, tri-state, etc. Tegra's pin controller is complex;
 128  * certain groups may only support configuring certain parameters, hence
 129  * each parameter is optional, represented by a -1 "reg" value.
 130  */
 131 struct tegra_pingroup {
 132         const char *name;
 133         const unsigned *pins;
 134         unsigned npins;
 135         unsigned funcs[4];
 136         unsigned func_safe;
 137         s16 mux_reg;
 138         s16 pupd_reg;
 139         s16 tri_reg;
 140         s16 einput_reg;
 141         s16 odrain_reg;
 142         s16 lock_reg;
 143         s16 ioreset_reg;
 144         s16 rcv_sel_reg;
 145         s16 drv_reg;
 146         s16 drvtype_reg;
 147         u32 mux_bank:2;
 148         u32 pupd_bank:2;
 149         u32 tri_bank:2;
 150         u32 einput_bank:2;
 151         u32 odrain_bank:2;
 152         u32 ioreset_bank:2;
 153         u32 rcv_sel_bank:2;
 154         u32 lock_bank:2;
 155         u32 drv_bank:2;
 156         u32 drvtype_bank:2;
 157         u32 mux_bit:5;
 158         u32 pupd_bit:5;
 159         u32 tri_bit:5;
 160         u32 einput_bit:5;
 161         u32 odrain_bit:5;
 162         u32 lock_bit:5;
 163         u32 ioreset_bit:5;
 164         u32 rcv_sel_bit:5;
 165         u32 hsm_bit:5;
 166         u32 schmitt_bit:5;
 167         u32 lpmd_bit:5;
 168         u32 drvdn_bit:5;
 169         u32 drvup_bit:5;
 170         u32 slwr_bit:5;
 171         u32 slwf_bit:5;
 172         u32 drvtype_bit:5;
 173         u32 drvdn_width:6;
 174         u32 drvup_width:6;
 175         u32 slwr_width:6;
 176         u32 slwf_width:6;
 177 };
 178
 179 /**
 180  * struct tegra_pinctrl_soc_data - Tegra pin controller driver configuration
 181  * @ngpios:     The number of GPIO pins the pin controller HW affects.
 182  * @pins:       An array describing all pins the pin controller affects.
 183  *              All pins which are also GPIOs must be listed first within the
 184  *              array, and be numbered identically to the GPIO controller's
 185  *              numbering.
 186  * @npins:      The numbmer of entries in @pins.
 187  * @functions:  An array describing all mux functions the SoC supports.
 188  * @nfunctions: The numbmer of entries in @functions.
 189  * @groups:     An array describing all pin groups the pin SoC supports.
 190  * @ngroups:    The numbmer of entries in @groups.
 191  */
 192 struct tegra_pinctrl_soc_data {
 193         unsigned ngpios;
 194         const struct pinctrl_pin_desc *pins;
 195         unsigned npins;
 196         const struct tegra_function *functions;
 197         unsigned nfunctions;
 198         const struct tegra_pingroup *groups;
 199         unsigned ngroups;
 200 };
 201
 202 int tegra_pinctrl_probe(struct platform_device *pdev,
 203                         const struct tegra_pinctrl_soc_data *soc_data);
 204 int tegra_pinctrl_remove(struct platform_device *pdev);
 205
 206 #endif