drivers/tty/serial/lantiq.c

   1 /*
   2  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License version 2 as published
   6  * by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * along with this program; if not, write to the Free Software
  15  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  16  *
  17  * Copyright (C) 2004 Infineon IFAP DC COM CPE
  18  * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
  19  * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
  20  * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
  21  */
  22
  23 #include <linux/slab.h>
  24 #include <linux/module.h>
  25 #include <linux/ioport.h>
  26 #include <linux/init.h>
  27 #include <linux/console.h>
  28 #include <linux/sysrq.h>
  29 #include <linux/device.h>
  30 #include <linux/tty.h>
  31 #include <linux/tty_flip.h>
  32 #include <linux/serial_core.h>
  33 #include <linux/serial.h>
  34 #include <linux/of_platform.h>
  35 #include <linux/of_address.h>
  36 #include <linux/of_irq.h>
  37 #include <linux/io.h>
  38 #include <linux/clk.h>
  39 #include <linux/gpio.h>
  40
  41 #include <lantiq_soc.h>
  42
  43 #define PORT_LTQ_ASC            111
  44 #define MAXPORTS                2
  45 #define UART_DUMMY_UER_RX       1
  46 #define DRVNAME                 "lantiq,asc"
  47 #ifdef __BIG_ENDIAN
  48 #define LTQ_ASC_TBUF            (0x0020 + 3)
  49 #define LTQ_ASC_RBUF            (0x0024 + 3)
  50 #else
  51 #define LTQ_ASC_TBUF            0x0020
  52 #define LTQ_ASC_RBUF            0x0024
  53 #endif
  54 #define LTQ_ASC_FSTAT           0x0048
  55 #define LTQ_ASC_WHBSTATE        0x0018
  56 #define LTQ_ASC_STATE           0x0014
  57 #define LTQ_ASC_IRNCR           0x00F8
  58 #define LTQ_ASC_CLC             0x0000
  59 #define LTQ_ASC_ID              0x0008
  60 #define LTQ_ASC_PISEL           0x0004
  61 #define LTQ_ASC_TXFCON          0x0044
  62 #define LTQ_ASC_RXFCON          0x0040
  63 #define LTQ_ASC_CON             0x0010
  64 #define LTQ_ASC_BG              0x0050
  65 #define LTQ_ASC_IRNREN          0x00F4
  66
  67 #define ASC_IRNREN_TX           0x1
  68 #define ASC_IRNREN_RX           0x2
  69 #define ASC_IRNREN_ERR          0x4
  70 #define ASC_IRNREN_TX_BUF       0x8
  71 #define ASC_IRNCR_TIR           0x1
  72 #define ASC_IRNCR_RIR           0x2
  73 #define ASC_IRNCR_EIR           0x4
  74
  75 #define ASCOPT_CSIZE            0x3
  76 #define TXFIFO_FL               1
  77 #define RXFIFO_FL               1
  78 #define ASCCLC_DISS             0x2
  79 #define ASCCLC_RMCMASK          0x0000FF00
  80 #define ASCCLC_RMCOFFSET        8
  81 #define ASCCON_M_8ASYNC         0x0
  82 #define ASCCON_M_7ASYNC         0x2
  83 #define ASCCON_ODD              0x00000020
  84 #define ASCCON_STP              0x00000080
  85 #define ASCCON_BRS              0x00000100
  86 #define ASCCON_FDE              0x00000200
  87 #define ASCCON_R                0x00008000
  88 #define ASCCON_FEN              0x00020000
  89 #define ASCCON_ROEN             0x00080000
  90 #define ASCCON_TOEN             0x00100000
  91 #define ASCSTATE_PE             0x00010000
  92 #define ASCSTATE_FE             0x00020000
  93 #define ASCSTATE_ROE            0x00080000
  94 #define ASCSTATE_ANY            (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
  95 #define ASCWHBSTATE_CLRREN      0x00000001
  96 #define ASCWHBSTATE_SETREN      0x00000002
  97 #define ASCWHBSTATE_CLRPE       0x00000004
  98 #define ASCWHBSTATE_CLRFE       0x00000008
  99 #define ASCWHBSTATE_CLRROE      0x00000020
 100 #define ASCTXFCON_TXFEN         0x0001
 101 #define ASCTXFCON_TXFFLU        0x0002
 102 #define ASCTXFCON_TXFITLMASK    0x3F00
 103 #define ASCTXFCON_TXFITLOFF     8
 104 #define ASCRXFCON_RXFEN         0x0001
 105 #define ASCRXFCON_RXFFLU        0x0002
 106 #define ASCRXFCON_RXFITLMASK    0x3F00
 107 #define ASCRXFCON_RXFITLOFF     8
 108 #define ASCFSTAT_RXFFLMASK      0x003F
 109 #define ASCFSTAT_TXFFLMASK      0x3F00
 110 #define ASCFSTAT_TXFREEMASK     0x3F000000
 111 #define ASCFSTAT_TXFREEOFF      24
 112
 113 static void lqasc_tx_chars(struct uart_port *port);
 114 static struct ltq_uart_port *lqasc_port[MAXPORTS];
 115 static struct uart_driver lqasc_reg;
 116 static DEFINE_SPINLOCK(ltq_asc_lock);
 117
 118 struct ltq_uart_port {
 119         struct uart_port        port;
 120         /* clock used to derive divider */
 121         struct clk              *fpiclk;
 122         /* clock gating of the ASC core */
 123         struct clk              *clk;
 124         unsigned int            tx_irq;
 125         unsigned int            rx_irq;
 126         unsigned int            err_irq;
 127 };
 128
 129 static inline struct
 130 ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
 131 {
 132         return container_of(port, struct ltq_uart_port, port);
 133 }
 134
 135 static void
 136 lqasc_stop_tx(struct uart_port *port)
 137 {
 138         return;
 139 }
 140
 141 static void
 142 lqasc_start_tx(struct uart_port *port)
 143 {
 144         unsigned long flags;
 145         spin_lock_irqsave(&ltq_asc_lock, flags);
 146         lqasc_tx_chars(port);
 147         spin_unlock_irqrestore(&ltq_asc_lock, flags);
 148         return;
 149 }
 150
 151 static void
 152 lqasc_stop_rx(struct uart_port *port)
 153 {
 154         ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
 155 }
 156
 157 static void
 158 lqasc_enable_ms(struct uart_port *port)
 159 {
 160 }
 161
 162 static int
 163 lqasc_rx_chars(struct uart_port *port)
 164 {
 165         struct tty_port *tport = &port->state->port;
 166         unsigned int ch = 0, rsr = 0, fifocnt;
 167
 168         fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
 169         while (fifocnt--) {
 170                 u8 flag = TTY_NORMAL;
 171                 ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
 172                 rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
 173                         & ASCSTATE_ANY) | UART_DUMMY_UER_RX;
 174                 tty_flip_buffer_push(tport);
 175                 port->icount.rx++;
 176
 177                 /*
 178                  * Note that the error handling code is
 179                  * out of the main execution path
 180                  */
 181                 if (rsr & ASCSTATE_ANY) {
 182                         if (rsr & ASCSTATE_PE) {
 183                                 port->icount.parity++;
 184                                 ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
 185                                         port->membase + LTQ_ASC_WHBSTATE);
 186                         } else if (rsr & ASCSTATE_FE) {
 187                                 port->icount.frame++;
 188                                 ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
 189                                         port->membase + LTQ_ASC_WHBSTATE);
 190                         }
 191                         if (rsr & ASCSTATE_ROE) {
 192                                 port->icount.overrun++;
 193                                 ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
 194                                         port->membase + LTQ_ASC_WHBSTATE);
 195                         }
 196
 197                         rsr &= port->read_status_mask;
 198
 199                         if (rsr & ASCSTATE_PE)
 200                                 flag = TTY_PARITY;
 201                         else if (rsr & ASCSTATE_FE)
 202                                 flag = TTY_FRAME;
 203                 }
 204
 205                 if ((rsr & port->ignore_status_mask) == 0)
 206                         tty_insert_flip_char(tport, ch, flag);
 207
 208                 if (rsr & ASCSTATE_ROE)
 209                         /*
 210                          * Overrun is special, since it's reported
 211                          * immediately, and doesn't affect the current
 212                          * character
 213                          */
 214                         tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 215         }
 216
 217         if (ch != 0)
 218                 tty_flip_buffer_push(tport);
 219
 220         return 0;
 221 }
 222
 223 static void
 224 lqasc_tx_chars(struct uart_port *port)
 225 {
 226         struct circ_buf *xmit = &port->state->xmit;
 227         if (uart_tx_stopped(port)) {
 228                 lqasc_stop_tx(port);
 229                 return;
 230         }
 231
 232         while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
 233                 ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
 234                 if (port->x_char) {
 235                         ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
 236                         port->icount.tx++;
 237                         port->x_char = 0;
 238                         continue;
 239                 }
 240
 241                 if (uart_circ_empty(xmit))
 242                         break;
 243
 244                 ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
 245                         port->membase + LTQ_ASC_TBUF);
 246                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 247                 port->icount.tx++;
 248         }
 249
 250         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 251                 uart_write_wakeup(port);
 252 }
 253
 254 static irqreturn_t
 255 lqasc_tx_int(int irq, void *_port)
 256 {
 257         unsigned long flags;
 258         struct uart_port *port = (struct uart_port *)_port;
 259         spin_lock_irqsave(&ltq_asc_lock, flags);
 260         ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
 261         spin_unlock_irqrestore(&ltq_asc_lock, flags);
 262         lqasc_start_tx(port);
 263         return IRQ_HANDLED;
 264 }
 265
 266 static irqreturn_t
 267 lqasc_err_int(int irq, void *_port)
 268 {
 269         unsigned long flags;
 270         struct uart_port *port = (struct uart_port *)_port;
 271         spin_lock_irqsave(&ltq_asc_lock, flags);
 272         /* clear any pending interrupts */
 273         ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
 274                 ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
 275         spin_unlock_irqrestore(&ltq_asc_lock, flags);
 276         return IRQ_HANDLED;
 277 }
 278
 279 static irqreturn_t
 280 lqasc_rx_int(int irq, void *_port)
 281 {
 282         unsigned long flags;
 283         struct uart_port *port = (struct uart_port *)_port;
 284         spin_lock_irqsave(&ltq_asc_lock, flags);
 285         ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
 286         lqasc_rx_chars(port);
 287         spin_unlock_irqrestore(&ltq_asc_lock, flags);
 288         return IRQ_HANDLED;
 289 }
 290
 291 static unsigned int
 292 lqasc_tx_empty(struct uart_port *port)
 293 {
 294         int status;
 295         status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
 296         return status ? 0 : TIOCSER_TEMT;
 297 }
 298
 299 static unsigned int
 300 lqasc_get_mctrl(struct uart_port *port)
 301 {
 302         return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
 303 }
 304
 305 static void
 306 lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
 307 {
 308 }
 309
 310 static void
 311 lqasc_break_ctl(struct uart_port *port, int break_state)
 312 {
 313 }
 314
 315 static int
 316 lqasc_startup(struct uart_port *port)
 317 {
 318         struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
 319         int retval;
 320
 321         if (ltq_port->clk)
 322                 clk_enable(ltq_port->clk);
 323         port->uartclk = clk_get_rate(ltq_port->fpiclk);
 324
 325         ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
 326                 port->membase + LTQ_ASC_CLC);
 327
 328         ltq_w32(0, port->membase + LTQ_ASC_PISEL);
 329         ltq_w32(
 330                 ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
 331                 ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
 332                 port->membase + LTQ_ASC_TXFCON);
 333         ltq_w32(
 334                 ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
 335                 | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
 336                 port->membase + LTQ_ASC_RXFCON);
 337         /* make sure other settings are written to hardware before
 338          * setting enable bits
 339          */
 340         wmb();
 341         ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
 342                 ASCCON_ROEN, port->membase + LTQ_ASC_CON);
 343
 344         retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
 345                 0, "asc_tx", port);
 346         if (retval) {
 347                 pr_err("failed to request lqasc_tx_int\n");
 348                 return retval;
 349         }
 350
 351         retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
 352                 0, "asc_rx", port);
 353         if (retval) {
 354                 pr_err("failed to request lqasc_rx_int\n");
 355                 goto err1;
 356         }
 357
 358         retval = request_irq(ltq_port->err_irq, lqasc_err_int,
 359                 0, "asc_err", port);
 360         if (retval) {
 361                 pr_err("failed to request lqasc_err_int\n");
 362                 goto err2;
 363         }
 364
 365         ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
 366                 port->membase + LTQ_ASC_IRNREN);
 367         return 0;
 368
 369 err2:
 370         free_irq(ltq_port->rx_irq, port);
 371 err1:
 372         free_irq(ltq_port->tx_irq, port);
 373         return retval;
 374 }
 375
 376 static void
 377 lqasc_shutdown(struct uart_port *port)
 378 {
 379         struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
 380         free_irq(ltq_port->tx_irq, port);
 381         free_irq(ltq_port->rx_irq, port);
 382         free_irq(ltq_port->err_irq, port);
 383
 384         ltq_w32(0, port->membase + LTQ_ASC_CON);
 385         ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
 386                 port->membase + LTQ_ASC_RXFCON);
 387         ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
 388                 port->membase + LTQ_ASC_TXFCON);
 389         if (ltq_port->clk)
 390                 clk_disable(ltq_port->clk);
 391 }
 392
 393 static void
 394 lqasc_set_termios(struct uart_port *port,
 395         struct ktermios *new, struct ktermios *old)
 396 {
 397         unsigned int cflag;
 398         unsigned int iflag;
 399         unsigned int divisor;
 400         unsigned int baud;
 401         unsigned int con = 0;
 402         unsigned long flags;
 403
 404         cflag = new->c_cflag;
 405         iflag = new->c_iflag;
 406
 407         switch (cflag & CSIZE) {
 408         case CS7:
 409                 con = ASCCON_M_7ASYNC;
 410                 break;
 411
 412         case CS5:
 413         case CS6:
 414         default:
 415                 new->c_cflag &= ~ CSIZE;
 416                 new->c_cflag |= CS8;
 417                 con = ASCCON_M_8ASYNC;
 418                 break;
 419         }
 420
 421         cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
 422
 423         if (cflag & CSTOPB)
 424                 con |= ASCCON_STP;
 425
 426         if (cflag & PARENB) {
 427                 if (!(cflag & PARODD))
 428                         con &= ~ASCCON_ODD;
 429                 else
 430                         con |= ASCCON_ODD;
 431         }
 432
 433         port->read_status_mask = ASCSTATE_ROE;
 434         if (iflag & INPCK)
 435                 port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
 436
 437         port->ignore_status_mask = 0;
 438         if (iflag & IGNPAR)
 439                 port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
 440
 441         if (iflag & IGNBRK) {
 442                 /*
 443                  * If we're ignoring parity and break indicators,
 444                  * ignore overruns too (for real raw support).
 445                  */
 446                 if (iflag & IGNPAR)
 447                         port->ignore_status_mask |= ASCSTATE_ROE;
 448         }
 449
 450         if ((cflag & CREAD) == 0)
 451                 port->ignore_status_mask |= UART_DUMMY_UER_RX;
 452
 453         /* set error signals  - framing, parity  and overrun, enable receiver */
 454         con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
 455
 456         spin_lock_irqsave(&ltq_asc_lock, flags);
 457
 458         /* set up CON */
 459         ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
 460
 461         /* Set baud rate - take a divider of 2 into account */
 462         baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
 463         divisor = uart_get_divisor(port, baud);
 464         divisor = divisor / 2 - 1;
 465
 466         /* disable the baudrate generator */
 467         ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
 468
 469         /* make sure the fractional divider is off */
 470         ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
 471
 472         /* set up to use divisor of 2 */
 473         ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
 474
 475         /* now we can write the new baudrate into the register */
 476         ltq_w32(divisor, port->membase + LTQ_ASC_BG);
 477
 478         /* turn the baudrate generator back on */
 479         ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
 480
 481         /* enable rx */
 482         ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
 483
 484         spin_unlock_irqrestore(&ltq_asc_lock, flags);
 485
 486         /* Don't rewrite B0 */
 487         if (tty_termios_baud_rate(new))
 488                 tty_termios_encode_baud_rate(new, baud, baud);
 489
 490         uart_update_timeout(port, cflag, baud);
 491 }
 492
 493 static const char*
 494 lqasc_type(struct uart_port *port)
 495 {
 496         if (port->type == PORT_LTQ_ASC)
 497                 return DRVNAME;
 498         else
 499                 return NULL;
 500 }
 501
 502 static void
 503 lqasc_release_port(struct uart_port *port)
 504 {
 505         if (port->flags & UPF_IOREMAP) {
 506                 iounmap(port->membase);
 507                 port->membase = NULL;
 508         }
 509 }
 510
 511 static int
 512 lqasc_request_port(struct uart_port *port)
 513 {
 514         struct platform_device *pdev = to_platform_device(port->dev);
 515         struct resource *res;
 516         int size;
 517
 518         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 519         if (!res) {
 520                 dev_err(&pdev->dev, "cannot obtain I/O memory region");
 521                 return -ENODEV;
 522         }
 523         size = resource_size(res);
 524
 525         res = devm_request_mem_region(&pdev->dev, res->start,
 526                 size, dev_name(&pdev->dev));
 527         if (!res) {
 528                 dev_err(&pdev->dev, "cannot request I/O memory region");
 529                 return -EBUSY;
 530         }
 531
 532         if (port->flags & UPF_IOREMAP) {
 533                 port->membase = devm_ioremap_nocache(&pdev->dev,
 534                         port->mapbase, size);
 535                 if (port->membase == NULL)
 536                         return -ENOMEM;
 537         }
 538         return 0;
 539 }
 540
 541 static void
 542 lqasc_config_port(struct uart_port *port, int flags)
 543 {
 544         if (flags & UART_CONFIG_TYPE) {
 545                 port->type = PORT_LTQ_ASC;
 546                 lqasc_request_port(port);
 547         }
 548 }
 549
 550 static int
 551 lqasc_verify_port(struct uart_port *port,
 552         struct serial_struct *ser)
 553 {
 554         int ret = 0;
 555         if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC)
 556                 ret = -EINVAL;
 557         if (ser->irq < 0 || ser->irq >= NR_IRQS)
 558                 ret = -EINVAL;
 559         if (ser->baud_base < 9600)
 560                 ret = -EINVAL;
 561         return ret;
 562 }
 563
 564 static struct uart_ops lqasc_pops = {
 565         .tx_empty =     lqasc_tx_empty,
 566         .set_mctrl =    lqasc_set_mctrl,
 567         .get_mctrl =    lqasc_get_mctrl,
 568         .stop_tx =      lqasc_stop_tx,
 569         .start_tx =     lqasc_start_tx,
 570         .stop_rx =      lqasc_stop_rx,
 571         .enable_ms =    lqasc_enable_ms,
 572         .break_ctl =    lqasc_break_ctl,
 573         .startup =      lqasc_startup,
 574         .shutdown =     lqasc_shutdown,
 575         .set_termios =  lqasc_set_termios,
 576         .type =         lqasc_type,
 577         .release_port = lqasc_release_port,
 578         .request_port = lqasc_request_port,
 579         .config_port =  lqasc_config_port,
 580         .verify_port =  lqasc_verify_port,
 581 };
 582
 583 static void
 584 lqasc_console_putchar(struct uart_port *port, int ch)
 585 {
 586         int fifofree;
 587
 588         if (!port->membase)
 589                 return;
 590
 591         do {
 592                 fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
 593                         & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
 594         } while (fifofree == 0);
 595         ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
 596 }
 597
 598
 599 static void
 600 lqasc_console_write(struct console *co, const char *s, u_int count)
 601 {
 602         struct ltq_uart_port *ltq_port;
 603         struct uart_port *port;
 604         unsigned long flags;
 605
 606         if (co->index >= MAXPORTS)
 607                 return;
 608
 609         ltq_port = lqasc_port[co->index];
 610         if (!ltq_port)
 611                 return;
 612
 613         port = &ltq_port->port;
 614
 615         spin_lock_irqsave(&ltq_asc_lock, flags);
 616         uart_console_write(port, s, count, lqasc_console_putchar);
 617         spin_unlock_irqrestore(&ltq_asc_lock, flags);
 618 }
 619
 620 static int __init
 621 lqasc_console_setup(struct console *co, char *options)
 622 {
 623         struct ltq_uart_port *ltq_port;
 624         struct uart_port *port;
 625         int baud = 115200;
 626         int bits = 8;
 627         int parity = 'n';
 628         int flow = 'n';
 629
 630         if (co->index >= MAXPORTS)
 631                 return -ENODEV;
 632
 633         ltq_port = lqasc_port[co->index];
 634         if (!ltq_port)
 635                 return -ENODEV;
 636
 637         port = &ltq_port->port;
 638
 639         port->uartclk = clk_get_rate(ltq_port->fpiclk);
 640
 641         if (options)
 642                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 643         return uart_set_options(port, co, baud, parity, bits, flow);
 644 }
 645
 646 static struct console lqasc_console = {
 647         .name =         "ttyLTQ",
 648         .write =        lqasc_console_write,
 649         .device =       uart_console_device,
 650         .setup =        lqasc_console_setup,
 651         .flags =        CON_PRINTBUFFER,
 652         .index =        -1,
 653         .data =         &lqasc_reg,
 654 };
 655
 656 static int __init
 657 lqasc_console_init(void)
 658 {
 659         register_console(&lqasc_console);
 660         return 0;
 661 }
 662 console_initcall(lqasc_console_init);
 663
 664 static struct uart_driver lqasc_reg = {
 665         .owner =        THIS_MODULE,
 666         .driver_name =  DRVNAME,
 667         .dev_name =     "ttyLTQ",
 668         .major =        0,
 669         .minor =        0,
 670         .nr =           MAXPORTS,
 671         .cons =         &lqasc_console,
 672 };
 673
 674 static int __init
 675 lqasc_probe(struct platform_device *pdev)
 676 {
 677         struct device_node *node = pdev->dev.of_node;
 678         struct ltq_uart_port *ltq_port;
 679         struct uart_port *port;
 680         struct resource *mmres, irqres[3];
 681         int line = 0;
 682         int ret;
 683
 684         mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 685         ret = of_irq_to_resource_table(node, irqres, 3);
 686         if (!mmres || (ret != 3)) {
 687                 dev_err(&pdev->dev,
 688                         "failed to get memory/irq for serial port\n");
 689                 return -ENODEV;
 690         }
 691
 692         /* check if this is the console port */
 693         if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
 694                 line = 1;
 695
 696         if (lqasc_port[line]) {
 697                 dev_err(&pdev->dev, "port %d already allocated\n", line);
 698                 return -EBUSY;
 699         }
 700
 701         ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port),
 702                         GFP_KERNEL);
 703         if (!ltq_port)
 704                 return -ENOMEM;
 705
 706         port = &ltq_port->port;
 707
 708         port->iotype    = SERIAL_IO_MEM;
 709         port->flags     = ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
 710         port->ops       = &lqasc_pops;
 711         port->fifosize  = 16;
 712         port->type      = PORT_LTQ_ASC,
 713         port->line      = line;
 714         port->dev       = &pdev->dev;
 715         /* unused, just to be backward-compatible */
 716         port->irq       = irqres[0].start;
 717         port->mapbase   = mmres->start;
 718
 719         ltq_port->fpiclk = clk_get_fpi();
 720         if (IS_ERR(ltq_port->fpiclk)) {
 721                 pr_err("failed to get fpi clk\n");
 722                 return -ENOENT;
 723         }
 724
 725         /* not all asc ports have clock gates, lets ignore the return code */
 726         ltq_port->clk = clk_get(&pdev->dev, NULL);
 727
 728         ltq_port->tx_irq = irqres[0].start;
 729         ltq_port->rx_irq = irqres[1].start;
 730         ltq_port->err_irq = irqres[2].start;
 731
 732         lqasc_port[line] = ltq_port;
 733         platform_set_drvdata(pdev, ltq_port);
 734
 735         ret = uart_add_one_port(&lqasc_reg, port);
 736
 737         return ret;
 738 }
 739
 740 static const struct of_device_id ltq_asc_match[] = {
 741         { .compatible = DRVNAME },
 742         {},
 743 };
 744 MODULE_DEVICE_TABLE(of, ltq_asc_match);
 745
 746 static struct platform_driver lqasc_driver = {
 747         .driver         = {
 748                 .name   = DRVNAME,
 749                 .owner  = THIS_MODULE,
 750                 .of_match_table = ltq_asc_match,
 751         },
 752 };
 753
 754 int __init
 755 init_lqasc(void)
 756 {
 757         int ret;
 758
 759         ret = uart_register_driver(&lqasc_reg);
 760         if (ret != 0)
 761                 return ret;
 762
 763         ret = platform_driver_probe(&lqasc_driver, lqasc_probe);
 764         if (ret != 0)
 765                 uart_unregister_driver(&lqasc_reg);
 766
 767         return ret;
 768 }
 769
 770 module_init(init_lqasc);
 771
 772 MODULE_DESCRIPTION("Lantiq serial port driver");
 773 MODULE_LICENSE("GPL");