arch/parisc/kernel/time.c

   1 /*
   2  *  linux/arch/parisc/kernel/time.c
   3  *
   4  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
   5  *  Modifications for ARM (C) 1994, 1995, 1996,1997 Russell King
   6  *  Copyright (C) 1999 SuSE GmbH, (Philipp Rumpf, prumpf@tux.org)
   7  *
   8  * 1994-07-02  Alan Modra
   9  *             fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
  10  * 1998-12-20  Updated NTP code according to technical memorandum Jan '96
  11  *             "A Kernel Model for Precision Timekeeping" by Dave Mills
  12  */
  13 #include <linux/errno.h>
  14 #include <linux/module.h>
  15 #include <linux/sched.h>
  16 #include <linux/kernel.h>
  17 #include <linux/param.h>
  18 #include <linux/string.h>
  19 #include <linux/mm.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/time.h>
  22 #include <linux/init.h>
  23 #include <linux/smp.h>
  24 #include <linux/profile.h>
  25 #include <linux/clocksource.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/ftrace.h>
  28
  29 #include <asm/uaccess.h>
  30 #include <asm/io.h>
  31 #include <asm/irq.h>
  32 #include <asm/page.h>
  33 #include <asm/param.h>
  34 #include <asm/pdc.h>
  35 #include <asm/led.h>
  36
  37 #include <linux/timex.h>
  38
  39 static unsigned long clocktick __read_mostly;   /* timer cycles per tick */
  40
  41 /*
  42  * We keep time on PA-RISC Linux by using the Interval Timer which is
  43  * a pair of registers; one is read-only and one is write-only; both
  44  * accessed through CR16.  The read-only register is 32 or 64 bits wide,
  45  * and increments by 1 every CPU clock tick.  The architecture only
  46  * guarantees us a rate between 0.5 and 2, but all implementations use a
  47  * rate of 1.  The write-only register is 32-bits wide.  When the lowest
  48  * 32 bits of the read-only register compare equal to the write-only
  49  * register, it raises a maskable external interrupt.  Each processor has
  50  * an Interval Timer of its own and they are not synchronised.
  51  *
  52  * We want to generate an interrupt every 1/HZ seconds.  So we program
  53  * CR16 to interrupt every @clocktick cycles.  The it_value in cpu_data
  54  * is programmed with the intended time of the next tick.  We can be
  55  * held off for an arbitrarily long period of time by interrupts being
  56  * disabled, so we may miss one or more ticks.
  57  */
  58 irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
  59 {
  60         unsigned long now, now2;
  61         unsigned long next_tick;
  62         unsigned long cycles_elapsed, ticks_elapsed = 1;
  63         unsigned long cycles_remainder;
  64         unsigned int cpu = smp_processor_id();
  65         struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
  66
  67         /* gcc can optimize for "read-only" case with a local clocktick */
  68         unsigned long cpt = clocktick;
  69
  70         profile_tick(CPU_PROFILING);
  71
  72         /* Initialize next_tick to the expected tick time. */
  73         next_tick = cpuinfo->it_value;
  74
  75         /* Get current cycle counter (Control Register 16). */
  76         now = mfctl(16);
  77
  78         cycles_elapsed = now - next_tick;
  79
  80         if ((cycles_elapsed >> 6) < cpt) {
  81                 /* use "cheap" math (add/subtract) instead
  82                  * of the more expensive div/mul method
  83                  */
  84                 cycles_remainder = cycles_elapsed;
  85                 while (cycles_remainder > cpt) {
  86                         cycles_remainder -= cpt;
  87                         ticks_elapsed++;
  88                 }
  89         } else {
  90                 /* TODO: Reduce this to one fdiv op */
  91                 cycles_remainder = cycles_elapsed % cpt;
  92                 ticks_elapsed += cycles_elapsed / cpt;
  93         }
  94
  95         /* convert from "division remainder" to "remainder of clock tick" */
  96         cycles_remainder = cpt - cycles_remainder;
  97
  98         /* Determine when (in CR16 cycles) next IT interrupt will fire.
  99          * We want IT to fire modulo clocktick even if we miss/skip some.
 100          * But those interrupts don't in fact get delivered that regularly.
 101          */
 102         next_tick = now + cycles_remainder;
 103
 104         cpuinfo->it_value = next_tick;
 105
 106         /* Program the IT when to deliver the next interrupt.
 107          * Only bottom 32-bits of next_tick are writable in CR16!
 108          */
 109         mtctl(next_tick, 16);
 110
 111         /* Skip one clocktick on purpose if we missed next_tick.
 112          * The new CR16 must be "later" than current CR16 otherwise
 113          * itimer would not fire until CR16 wrapped - e.g 4 seconds
 114          * later on a 1Ghz processor. We'll account for the missed
 115          * tick on the next timer interrupt.
 116          *
 117          * "next_tick - now" will always give the difference regardless
 118          * if one or the other wrapped. If "now" is "bigger" we'll end up
 119          * with a very large unsigned number.
 120          */
 121         now2 = mfctl(16);
 122         if (next_tick - now2 > cpt)
 123                 mtctl(next_tick+cpt, 16);
 124
 125 #if 1
 126 /*
 127  * GGG: DEBUG code for how many cycles programming CR16 used.
 128  */
 129         if (unlikely(now2 - now > 0x3000))      /* 12K cycles */
 130                 printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
 131                         " cyc %lX rem %lX "
 132                         " next/now %lX/%lX\n",
 133                         cpu, now2 - now, cycles_elapsed, cycles_remainder,
 134                         next_tick, now );
 135 #endif
 136
 137         /* Can we differentiate between "early CR16" (aka Scenario 1) and
 138          * "long delay" (aka Scenario 3)? I don't think so.
 139          *
 140          * Timer_interrupt will be delivered at least a few hundred cycles
 141          * after the IT fires. But it's arbitrary how much time passes
 142          * before we call it "late". I've picked one second.
 143          *
 144          * It's important NO printk's are between reading CR16 and
 145          * setting up the next value. May introduce huge variance.
 146          */
 147         if (unlikely(ticks_elapsed > HZ)) {
 148                 /* Scenario 3: very long delay?  bad in any case */
 149                 printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
 150                         " cycles %lX rem %lX "
 151                         " next/now %lX/%lX\n",
 152                         cpu,
 153                         cycles_elapsed, cycles_remainder,
 154                         next_tick, now );
 155         }
 156
 157         /* Done mucking with unreliable delivery of interrupts.
 158          * Go do system house keeping.
 159          */
 160
 161         if (!--cpuinfo->prof_counter) {
 162                 cpuinfo->prof_counter = cpuinfo->prof_multiplier;
 163                 update_process_times(user_mode(get_irq_regs()));
 164         }
 165
 166         if (cpu == 0)
 167                 xtime_update(ticks_elapsed);
 168
 169         return IRQ_HANDLED;
 170 }
 171
 172
 173 unsigned long profile_pc(struct pt_regs *regs)
 174 {
 175         unsigned long pc = instruction_pointer(regs);
 176
 177         if (regs->gr[0] & PSW_N)
 178                 pc -= 4;
 179
 180 #ifdef CONFIG_SMP
 181         if (in_lock_functions(pc))
 182                 pc = regs->gr[2];
 183 #endif
 184
 185         return pc;
 186 }
 187 EXPORT_SYMBOL(profile_pc);
 188
 189
 190 /* clock source code */
 191
 192 static cycle_t read_cr16(struct clocksource *cs)
 193 {
 194         return get_cycles();
 195 }
 196
 197 static struct clocksource clocksource_cr16 = {
 198         .name                   = "cr16",
 199         .rating                 = 300,
 200         .read                   = read_cr16,
 201         .mask                   = CLOCKSOURCE_MASK(BITS_PER_LONG),
 202         .flags                  = CLOCK_SOURCE_IS_CONTINUOUS,
 203 };
 204
 205 #ifdef CONFIG_SMP
 206 int update_cr16_clocksource(void)
 207 {
 208         /* since the cr16 cycle counters are not synchronized across CPUs,
 209            we'll check if we should switch to a safe clocksource: */
 210         if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) {
 211                 clocksource_change_rating(&clocksource_cr16, 0);
 212                 return 1;
 213         }
 214
 215         return 0;
 216 }
 217 #else
 218 int update_cr16_clocksource(void)
 219 {
 220         return 0; /* no change */
 221 }
 222 #endif /*CONFIG_SMP*/
 223
 224 void __init start_cpu_itimer(void)
 225 {
 226         unsigned int cpu = smp_processor_id();
 227         unsigned long next_tick = mfctl(16) + clocktick;
 228
 229         mtctl(next_tick, 16);           /* kick off Interval Timer (CR16) */
 230
 231         per_cpu(cpu_data, cpu).it_value = next_tick;
 232 }
 233
 234 static struct platform_device rtc_generic_dev = {
 235         .name = "rtc-generic",
 236         .id = -1,
 237 };
 238
 239 static int __init rtc_init(void)
 240 {
 241         if (platform_device_register(&rtc_generic_dev) < 0)
 242                 printk(KERN_ERR "unable to register rtc device...\n");
 243
 244         /* not necessarily an error */
 245         return 0;
 246 }
 247 module_init(rtc_init);
 248
 249 void read_persistent_clock(struct timespec *ts)
 250 {
 251         static struct pdc_tod tod_data;
 252         if (pdc_tod_read(&tod_data) == 0) {
 253                 ts->tv_sec = tod_data.tod_sec;
 254                 ts->tv_nsec = tod_data.tod_usec * 1000;
 255         } else {
 256                 printk(KERN_ERR "Error reading tod clock\n");
 257                 ts->tv_sec = 0;
 258                 ts->tv_nsec = 0;
 259         }
 260 }
 261
 262 void __init time_init(void)
 263 {
 264         unsigned long current_cr16_khz;
 265
 266         clocktick = (100 * PAGE0->mem_10msec) / HZ;
 267
 268         start_cpu_itimer();     /* get CPU 0 started */
 269
 270         /* register at clocksource framework */
 271         current_cr16_khz = PAGE0->mem_10msec/10;  /* kHz */
 272         clocksource_register_khz(&clocksource_cr16, current_cr16_khz);
 273 }