1 // SPDX-License-Identifier: GPL-2.0
2 /* Various workarounds for chipset bugs.
3 This code runs very early and can't use the regular PCI subsystem
4 The entries are keyed to PCI bridges which usually identify chipsets
6 This is only for whole classes of chipsets with specific problems which
7 need early invasive action (e.g. before the timers are initialized).
8 Most PCI device specific workarounds can be done later and should be
10 Mainboard specific bugs should be handled by DMI entries.
11 CPU specific bugs in setup.c */
13 #include <linux/pci.h>
14 #include <linux/acpi.h>
15 #include <linux/delay.h>
16 #include <linux/pci_ids.h>
17 #include <linux/bcma/bcma.h>
18 #include <linux/bcma/bcma_regs.h>
19 #include <linux/platform_data/x86/apple.h>
20 #include <drm/i915_drm.h>
21 #include <asm/pci-direct.h>
23 #include <asm/io_apic.h>
26 #include <asm/iommu.h>
28 #include <asm/irq_remapping.h>
29 #include <asm/early_ioremap.h>
31 #define dev_err(msg) pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg)
33 static void __init
fix_hypertransport_config(int num
, int slot
, int func
)
37 * we found a hypertransport bus
38 * make sure that we are broadcasting
39 * interrupts to all cpus on the ht bus
40 * if we're using extended apic ids
42 htcfg
= read_pci_config(num
, slot
, func
, 0x68);
43 if (htcfg
& (1 << 18)) {
44 printk(KERN_INFO
"Detected use of extended apic ids "
45 "on hypertransport bus\n");
46 if ((htcfg
& (1 << 17)) == 0) {
47 printk(KERN_INFO
"Enabling hypertransport extended "
48 "apic interrupt broadcast\n");
49 printk(KERN_INFO
"Note this is a bios bug, "
50 "please contact your hw vendor\n");
52 write_pci_config(num
, slot
, func
, 0x68, htcfg
);
59 static void __init
via_bugs(int num
, int slot
, int func
)
61 #ifdef CONFIG_GART_IOMMU
62 if ((max_pfn
> MAX_DMA32_PFN
|| force_iommu
) &&
63 !gart_iommu_aperture_allowed
) {
65 "Looks like a VIA chipset. Disabling IOMMU."
66 " Override with iommu=allowed\n");
67 gart_iommu_aperture_disabled
= 1;
73 #ifdef CONFIG_X86_IO_APIC
75 static int __init
nvidia_hpet_check(struct acpi_table_header
*header
)
79 #endif /* CONFIG_X86_IO_APIC */
80 #endif /* CONFIG_ACPI */
82 static void __init
nvidia_bugs(int num
, int slot
, int func
)
85 #ifdef CONFIG_X86_IO_APIC
87 * Only applies to Nvidia root ports (bus 0) and not to
88 * Nvidia graphics cards with PCI ports on secondary buses.
94 * All timer overrides on Nvidia are
95 * wrong unless HPET is enabled.
96 * Unfortunately that's not true on many Asus boards.
97 * We don't know yet how to detect this automatically, but
98 * at least allow a command line override.
100 if (acpi_use_timer_override
)
103 if (acpi_table_parse(ACPI_SIG_HPET
, nvidia_hpet_check
)) {
104 acpi_skip_timer_override
= 1;
105 printk(KERN_INFO
"Nvidia board "
106 "detected. Ignoring ACPI "
107 "timer override.\n");
108 printk(KERN_INFO
"If you got timer trouble "
109 "try acpi_use_timer_override\n");
113 /* RED-PEN skip them on mptables too? */
117 #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
118 static u32 __init
ati_ixp4x0_rev(int num
, int slot
, int func
)
123 b
= read_pci_config_byte(num
, slot
, func
, 0xac);
125 write_pci_config_byte(num
, slot
, func
, 0xac, b
);
127 d
= read_pci_config(num
, slot
, func
, 0x70);
129 write_pci_config(num
, slot
, func
, 0x70, d
);
131 d
= read_pci_config(num
, slot
, func
, 0x8);
136 static void __init
ati_bugs(int num
, int slot
, int func
)
141 if (acpi_use_timer_override
)
144 d
= ati_ixp4x0_rev(num
, slot
, func
);
146 acpi_skip_timer_override
= 1;
148 /* check for IRQ0 interrupt swap */
149 outb(0x72, 0xcd6); b
= inb(0xcd7);
151 acpi_skip_timer_override
= 1;
154 if (acpi_skip_timer_override
) {
155 printk(KERN_INFO
"SB4X0 revision 0x%x\n", d
);
156 printk(KERN_INFO
"Ignoring ACPI timer override.\n");
157 printk(KERN_INFO
"If you got timer trouble "
158 "try acpi_use_timer_override\n");
162 static u32 __init
ati_sbx00_rev(int num
, int slot
, int func
)
166 d
= read_pci_config(num
, slot
, func
, 0x8);
172 static void __init
ati_bugs_contd(int num
, int slot
, int func
)
176 rev
= ati_sbx00_rev(num
, slot
, func
);
178 acpi_fix_pin2_polarity
= 1;
181 * SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
182 * SB700: revisions 0x39, 0x3a, ...
183 * SB800: revisions 0x40, 0x41, ...
188 if (acpi_use_timer_override
)
191 /* check for IRQ0 interrupt swap */
192 d
= read_pci_config(num
, slot
, func
, 0x64);
194 acpi_skip_timer_override
= 1;
196 if (acpi_skip_timer_override
) {
197 printk(KERN_INFO
"SB600 revision 0x%x\n", rev
);
198 printk(KERN_INFO
"Ignoring ACPI timer override.\n");
199 printk(KERN_INFO
"If you got timer trouble "
200 "try acpi_use_timer_override\n");
204 static void __init
ati_bugs(int num
, int slot
, int func
)
208 static void __init
ati_bugs_contd(int num
, int slot
, int func
)
213 static void __init
intel_remapping_check(int num
, int slot
, int func
)
218 device
= read_pci_config_16(num
, slot
, func
, PCI_DEVICE_ID
);
219 revision
= read_pci_config_byte(num
, slot
, func
, PCI_REVISION_ID
);
222 * Revision <= 13 of all triggering devices id in this quirk
223 * have a problem draining interrupts when irq remapping is
224 * enabled, and should be flagged as broken. Additionally
225 * revision 0x22 of device id 0x3405 has this problem.
227 if (revision
<= 0x13)
228 set_irq_remapping_broken();
229 else if (device
== 0x3405 && revision
== 0x22)
230 set_irq_remapping_broken();
234 * Systems with Intel graphics controllers set aside memory exclusively
235 * for gfx driver use. This memory is not marked in the E820 as reserved
236 * or as RAM, and so is subject to overlap from E820 manipulation later
237 * in the boot process. On some systems, MMIO space is allocated on top,
238 * despite the efforts of the "RAM buffer" approach, which simply rounds
239 * memory boundaries up to 64M to try to catch space that may decode
240 * as RAM and so is not suitable for MMIO.
243 #define KB(x) ((x) * 1024UL)
244 #define MB(x) (KB (KB (x)))
246 static resource_size_t __init
i830_tseg_size(void)
248 u8 esmramc
= read_pci_config_byte(0, 0, 0, I830_ESMRAMC
);
250 if (!(esmramc
& TSEG_ENABLE
))
253 if (esmramc
& I830_TSEG_SIZE_1M
)
259 static resource_size_t __init
i845_tseg_size(void)
261 u8 esmramc
= read_pci_config_byte(0, 0, 0, I845_ESMRAMC
);
262 u8 tseg_size
= esmramc
& I845_TSEG_SIZE_MASK
;
264 if (!(esmramc
& TSEG_ENABLE
))
268 case I845_TSEG_SIZE_512K
: return KB(512);
269 case I845_TSEG_SIZE_1M
: return MB(1);
271 WARN(1, "Unknown ESMRAMC value: %x!\n", esmramc
);
276 static resource_size_t __init
i85x_tseg_size(void)
278 u8 esmramc
= read_pci_config_byte(0, 0, 0, I85X_ESMRAMC
);
280 if (!(esmramc
& TSEG_ENABLE
))
286 static resource_size_t __init
i830_mem_size(void)
288 return read_pci_config_byte(0, 0, 0, I830_DRB3
) * MB(32);
291 static resource_size_t __init
i85x_mem_size(void)
293 return read_pci_config_byte(0, 0, 1, I85X_DRB3
) * MB(32);
297 * On 830/845/85x the stolen memory base isn't available in any
298 * register. We need to calculate it as TOM-TSEG_SIZE-stolen_size.
300 static resource_size_t __init
i830_stolen_base(int num
, int slot
, int func
,
301 resource_size_t stolen_size
)
303 return i830_mem_size() - i830_tseg_size() - stolen_size
;
306 static resource_size_t __init
i845_stolen_base(int num
, int slot
, int func
,
307 resource_size_t stolen_size
)
309 return i830_mem_size() - i845_tseg_size() - stolen_size
;
312 static resource_size_t __init
i85x_stolen_base(int num
, int slot
, int func
,
313 resource_size_t stolen_size
)
315 return i85x_mem_size() - i85x_tseg_size() - stolen_size
;
318 static resource_size_t __init
i865_stolen_base(int num
, int slot
, int func
,
319 resource_size_t stolen_size
)
323 toud
= read_pci_config_16(0, 0, 0, I865_TOUD
);
325 return toud
* KB(64) + i845_tseg_size();
328 static resource_size_t __init
gen3_stolen_base(int num
, int slot
, int func
,
329 resource_size_t stolen_size
)
333 /* Almost universally we can find the Graphics Base of Stolen Memory
334 * at register BSM (0x5c) in the igfx configuration space. On a few
335 * (desktop) machines this is also mirrored in the bridge device at
336 * different locations, or in the MCHBAR.
338 bsm
= read_pci_config(num
, slot
, func
, INTEL_BSM
);
340 return bsm
& INTEL_BSM_MASK
;
343 static resource_size_t __init
i830_stolen_size(int num
, int slot
, int func
)
348 gmch_ctrl
= read_pci_config_16(0, 0, 0, I830_GMCH_CTRL
);
349 gms
= gmch_ctrl
& I830_GMCH_GMS_MASK
;
352 case I830_GMCH_GMS_STOLEN_512
: return KB(512);
353 case I830_GMCH_GMS_STOLEN_1024
: return MB(1);
354 case I830_GMCH_GMS_STOLEN_8192
: return MB(8);
355 /* local memory isn't part of the normal address space */
356 case I830_GMCH_GMS_LOCAL
: return 0;
358 WARN(1, "Unknown GMCH_CTRL value: %x!\n", gmch_ctrl
);
364 static resource_size_t __init
gen3_stolen_size(int num
, int slot
, int func
)
369 gmch_ctrl
= read_pci_config_16(0, 0, 0, I830_GMCH_CTRL
);
370 gms
= gmch_ctrl
& I855_GMCH_GMS_MASK
;
373 case I855_GMCH_GMS_STOLEN_1M
: return MB(1);
374 case I855_GMCH_GMS_STOLEN_4M
: return MB(4);
375 case I855_GMCH_GMS_STOLEN_8M
: return MB(8);
376 case I855_GMCH_GMS_STOLEN_16M
: return MB(16);
377 case I855_GMCH_GMS_STOLEN_32M
: return MB(32);
378 case I915_GMCH_GMS_STOLEN_48M
: return MB(48);
379 case I915_GMCH_GMS_STOLEN_64M
: return MB(64);
380 case G33_GMCH_GMS_STOLEN_128M
: return MB(128);
381 case G33_GMCH_GMS_STOLEN_256M
: return MB(256);
382 case INTEL_GMCH_GMS_STOLEN_96M
: return MB(96);
383 case INTEL_GMCH_GMS_STOLEN_160M
:return MB(160);
384 case INTEL_GMCH_GMS_STOLEN_224M
:return MB(224);
385 case INTEL_GMCH_GMS_STOLEN_352M
:return MB(352);
387 WARN(1, "Unknown GMCH_CTRL value: %x!\n", gmch_ctrl
);
393 static resource_size_t __init
gen6_stolen_size(int num
, int slot
, int func
)
398 gmch_ctrl
= read_pci_config_16(num
, slot
, func
, SNB_GMCH_CTRL
);
399 gms
= (gmch_ctrl
>> SNB_GMCH_GMS_SHIFT
) & SNB_GMCH_GMS_MASK
;
404 static resource_size_t __init
gen8_stolen_size(int num
, int slot
, int func
)
409 gmch_ctrl
= read_pci_config_16(num
, slot
, func
, SNB_GMCH_CTRL
);
410 gms
= (gmch_ctrl
>> BDW_GMCH_GMS_SHIFT
) & BDW_GMCH_GMS_MASK
;
415 static resource_size_t __init
chv_stolen_size(int num
, int slot
, int func
)
420 gmch_ctrl
= read_pci_config_16(num
, slot
, func
, SNB_GMCH_CTRL
);
421 gms
= (gmch_ctrl
>> SNB_GMCH_GMS_SHIFT
) & SNB_GMCH_GMS_MASK
;
424 * 0x0 to 0x10: 32MB increments starting at 0MB
425 * 0x11 to 0x16: 4MB increments starting at 8MB
426 * 0x17 to 0x1d: 4MB increments start at 36MB
431 return (gms
- 0x11) * MB(4) + MB(8);
433 return (gms
- 0x17) * MB(4) + MB(36);
436 static resource_size_t __init
gen9_stolen_size(int num
, int slot
, int func
)
441 gmch_ctrl
= read_pci_config_16(num
, slot
, func
, SNB_GMCH_CTRL
);
442 gms
= (gmch_ctrl
>> BDW_GMCH_GMS_SHIFT
) & BDW_GMCH_GMS_MASK
;
444 /* 0x0 to 0xef: 32MB increments starting at 0MB */
445 /* 0xf0 to 0xfe: 4MB increments starting at 4MB */
449 return (gms
- 0xf0) * MB(4) + MB(4);
452 struct intel_early_ops
{
453 resource_size_t (*stolen_size
)(int num
, int slot
, int func
);
454 resource_size_t (*stolen_base
)(int num
, int slot
, int func
,
455 resource_size_t size
);
458 static const struct intel_early_ops i830_early_ops __initconst
= {
459 .stolen_base
= i830_stolen_base
,
460 .stolen_size
= i830_stolen_size
,
463 static const struct intel_early_ops i845_early_ops __initconst
= {
464 .stolen_base
= i845_stolen_base
,
465 .stolen_size
= i830_stolen_size
,
468 static const struct intel_early_ops i85x_early_ops __initconst
= {
469 .stolen_base
= i85x_stolen_base
,
470 .stolen_size
= gen3_stolen_size
,
473 static const struct intel_early_ops i865_early_ops __initconst
= {
474 .stolen_base
= i865_stolen_base
,
475 .stolen_size
= gen3_stolen_size
,
478 static const struct intel_early_ops gen3_early_ops __initconst
= {
479 .stolen_base
= gen3_stolen_base
,
480 .stolen_size
= gen3_stolen_size
,
483 static const struct intel_early_ops gen6_early_ops __initconst
= {
484 .stolen_base
= gen3_stolen_base
,
485 .stolen_size
= gen6_stolen_size
,
488 static const struct intel_early_ops gen8_early_ops __initconst
= {
489 .stolen_base
= gen3_stolen_base
,
490 .stolen_size
= gen8_stolen_size
,
493 static const struct intel_early_ops gen9_early_ops __initconst
= {
494 .stolen_base
= gen3_stolen_base
,
495 .stolen_size
= gen9_stolen_size
,
498 static const struct intel_early_ops chv_early_ops __initconst
= {
499 .stolen_base
= gen3_stolen_base
,
500 .stolen_size
= chv_stolen_size
,
503 static const struct pci_device_id intel_early_ids
[] __initconst
= {
504 INTEL_I830_IDS(&i830_early_ops
),
505 INTEL_I845G_IDS(&i845_early_ops
),
506 INTEL_I85X_IDS(&i85x_early_ops
),
507 INTEL_I865G_IDS(&i865_early_ops
),
508 INTEL_I915G_IDS(&gen3_early_ops
),
509 INTEL_I915GM_IDS(&gen3_early_ops
),
510 INTEL_I945G_IDS(&gen3_early_ops
),
511 INTEL_I945GM_IDS(&gen3_early_ops
),
512 INTEL_VLV_IDS(&gen6_early_ops
),
513 INTEL_PINEVIEW_IDS(&gen3_early_ops
),
514 INTEL_I965G_IDS(&gen3_early_ops
),
515 INTEL_G33_IDS(&gen3_early_ops
),
516 INTEL_I965GM_IDS(&gen3_early_ops
),
517 INTEL_GM45_IDS(&gen3_early_ops
),
518 INTEL_G45_IDS(&gen3_early_ops
),
519 INTEL_IRONLAKE_D_IDS(&gen3_early_ops
),
520 INTEL_IRONLAKE_M_IDS(&gen3_early_ops
),
521 INTEL_SNB_D_IDS(&gen6_early_ops
),
522 INTEL_SNB_M_IDS(&gen6_early_ops
),
523 INTEL_IVB_M_IDS(&gen6_early_ops
),
524 INTEL_IVB_D_IDS(&gen6_early_ops
),
525 INTEL_HSW_IDS(&gen6_early_ops
),
526 INTEL_BDW_IDS(&gen8_early_ops
),
527 INTEL_CHV_IDS(&chv_early_ops
),
528 INTEL_SKL_IDS(&gen9_early_ops
),
529 INTEL_BXT_IDS(&gen9_early_ops
),
530 INTEL_KBL_IDS(&gen9_early_ops
),
531 INTEL_CFL_IDS(&gen9_early_ops
),
532 INTEL_GLK_IDS(&gen9_early_ops
),
533 INTEL_CNL_IDS(&gen9_early_ops
),
536 struct resource intel_graphics_stolen_res __ro_after_init
= DEFINE_RES_MEM(0, 0);
537 EXPORT_SYMBOL(intel_graphics_stolen_res
);
540 intel_graphics_stolen(int num
, int slot
, int func
,
541 const struct intel_early_ops
*early_ops
)
543 resource_size_t base
, size
;
546 size
= early_ops
->stolen_size(num
, slot
, func
);
547 base
= early_ops
->stolen_base(num
, slot
, func
, size
);
552 end
= base
+ size
- 1;
554 intel_graphics_stolen_res
.start
= base
;
555 intel_graphics_stolen_res
.end
= end
;
557 printk(KERN_INFO
"Reserving Intel graphics memory at %pR\n",
558 &intel_graphics_stolen_res
);
560 /* Mark this space as reserved */
561 e820__range_add(base
, size
, E820_TYPE_RESERVED
);
562 e820__update_table(e820_table
);
565 static void __init
intel_graphics_quirks(int num
, int slot
, int func
)
567 const struct intel_early_ops
*early_ops
;
571 device
= read_pci_config_16(num
, slot
, func
, PCI_DEVICE_ID
);
573 for (i
= 0; i
< ARRAY_SIZE(intel_early_ids
); i
++) {
574 kernel_ulong_t driver_data
= intel_early_ids
[i
].driver_data
;
576 if (intel_early_ids
[i
].device
!= device
)
579 early_ops
= (typeof(early_ops
))driver_data
;
581 intel_graphics_stolen(num
, slot
, func
, early_ops
);
587 static void __init
force_disable_hpet(int num
, int slot
, int func
)
589 #ifdef CONFIG_HPET_TIMER
590 boot_hpet_disable
= true;
591 pr_info("x86/hpet: Will disable the HPET for this platform because it's not reliable\n");
595 #define BCM4331_MMIO_SIZE 16384
596 #define BCM4331_PM_CAP 0x40
597 #define bcma_aread32(reg) ioread32(mmio + 1 * BCMA_CORE_SIZE + reg)
598 #define bcma_awrite32(reg, val) iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg)
600 static void __init
apple_airport_reset(int bus
, int slot
, int func
)
607 if (!x86_apple_machine
)
610 /* Card may have been put into PCI_D3hot by grub quirk */
611 pmcsr
= read_pci_config_16(bus
, slot
, func
, BCM4331_PM_CAP
+ PCI_PM_CTRL
);
613 if ((pmcsr
& PCI_PM_CTRL_STATE_MASK
) != PCI_D0
) {
614 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
615 write_pci_config_16(bus
, slot
, func
, BCM4331_PM_CAP
+ PCI_PM_CTRL
, pmcsr
);
618 pmcsr
= read_pci_config_16(bus
, slot
, func
, BCM4331_PM_CAP
+ PCI_PM_CTRL
);
619 if ((pmcsr
& PCI_PM_CTRL_STATE_MASK
) != PCI_D0
) {
620 dev_err("Cannot power up Apple AirPort card\n");
625 addr
= read_pci_config(bus
, slot
, func
, PCI_BASE_ADDRESS_0
);
626 addr
|= (u64
)read_pci_config(bus
, slot
, func
, PCI_BASE_ADDRESS_1
) << 32;
627 addr
&= PCI_BASE_ADDRESS_MEM_MASK
;
629 mmio
= early_ioremap(addr
, BCM4331_MMIO_SIZE
);
631 dev_err("Cannot iomap Apple AirPort card\n");
635 pr_info("Resetting Apple AirPort card (left enabled by EFI)\n");
637 for (i
= 0; bcma_aread32(BCMA_RESET_ST
) && i
< 30; i
++)
640 bcma_awrite32(BCMA_RESET_CTL
, BCMA_RESET_CTL_RESET
);
641 bcma_aread32(BCMA_RESET_CTL
);
644 bcma_awrite32(BCMA_RESET_CTL
, 0);
645 bcma_aread32(BCMA_RESET_CTL
);
648 early_iounmap(mmio
, BCM4331_MMIO_SIZE
);
651 #define QFLAG_APPLY_ONCE 0x1
652 #define QFLAG_APPLIED 0x2
653 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
660 void (*f
)(int num
, int slot
, int func
);
663 static struct chipset early_qrk
[] __initdata
= {
664 { PCI_VENDOR_ID_NVIDIA
, PCI_ANY_ID
,
665 PCI_CLASS_BRIDGE_PCI
, PCI_ANY_ID
, QFLAG_APPLY_ONCE
, nvidia_bugs
},
666 { PCI_VENDOR_ID_VIA
, PCI_ANY_ID
,
667 PCI_CLASS_BRIDGE_PCI
, PCI_ANY_ID
, QFLAG_APPLY_ONCE
, via_bugs
},
668 { PCI_VENDOR_ID_AMD
, PCI_DEVICE_ID_AMD_K8_NB
,
669 PCI_CLASS_BRIDGE_HOST
, PCI_ANY_ID
, 0, fix_hypertransport_config
},
670 { PCI_VENDOR_ID_ATI
, PCI_DEVICE_ID_ATI_IXP400_SMBUS
,
671 PCI_CLASS_SERIAL_SMBUS
, PCI_ANY_ID
, 0, ati_bugs
},
672 { PCI_VENDOR_ID_ATI
, PCI_DEVICE_ID_ATI_SBX00_SMBUS
,
673 PCI_CLASS_SERIAL_SMBUS
, PCI_ANY_ID
, 0, ati_bugs_contd
},
674 { PCI_VENDOR_ID_INTEL
, 0x3403, PCI_CLASS_BRIDGE_HOST
,
675 PCI_BASE_CLASS_BRIDGE
, 0, intel_remapping_check
},
676 { PCI_VENDOR_ID_INTEL
, 0x3405, PCI_CLASS_BRIDGE_HOST
,
677 PCI_BASE_CLASS_BRIDGE
, 0, intel_remapping_check
},
678 { PCI_VENDOR_ID_INTEL
, 0x3406, PCI_CLASS_BRIDGE_HOST
,
679 PCI_BASE_CLASS_BRIDGE
, 0, intel_remapping_check
},
680 { PCI_VENDOR_ID_INTEL
, PCI_ANY_ID
, PCI_CLASS_DISPLAY_VGA
, PCI_ANY_ID
,
681 QFLAG_APPLY_ONCE
, intel_graphics_quirks
},
683 * HPET on the current version of the Baytrail platform has accuracy
684 * problems: it will halt in deep idle state - so we disable it.
686 * More details can be found in section 18.10.1.3 of the datasheet:
688 * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf
690 { PCI_VENDOR_ID_INTEL
, 0x0f00,
691 PCI_CLASS_BRIDGE_HOST
, PCI_ANY_ID
, 0, force_disable_hpet
},
692 { PCI_VENDOR_ID_BROADCOM
, 0x4331,
693 PCI_CLASS_NETWORK_OTHER
, PCI_ANY_ID
, 0, apple_airport_reset
},
697 static void __init
early_pci_scan_bus(int bus
);
700 * check_dev_quirk - apply early quirks to a given PCI device
703 * @func: PCI function
705 * Check the vendor & device ID against the early quirks table.
707 * If the device is single function, let early_pci_scan_bus() know so we don't
708 * poke at this device again.
710 static int __init
check_dev_quirk(int num
, int slot
, int func
)
719 class = read_pci_config_16(num
, slot
, func
, PCI_CLASS_DEVICE
);
722 return -1; /* no class, treat as single function */
724 vendor
= read_pci_config_16(num
, slot
, func
, PCI_VENDOR_ID
);
726 device
= read_pci_config_16(num
, slot
, func
, PCI_DEVICE_ID
);
728 for (i
= 0; early_qrk
[i
].f
!= NULL
; i
++) {
729 if (((early_qrk
[i
].vendor
== PCI_ANY_ID
) ||
730 (early_qrk
[i
].vendor
== vendor
)) &&
731 ((early_qrk
[i
].device
== PCI_ANY_ID
) ||
732 (early_qrk
[i
].device
== device
)) &&
733 (!((early_qrk
[i
].class ^ class) &
734 early_qrk
[i
].class_mask
))) {
735 if ((early_qrk
[i
].flags
&
736 QFLAG_DONE
) != QFLAG_DONE
)
737 early_qrk
[i
].f(num
, slot
, func
);
738 early_qrk
[i
].flags
|= QFLAG_APPLIED
;
742 type
= read_pci_config_byte(num
, slot
, func
,
745 if ((type
& 0x7f) == PCI_HEADER_TYPE_BRIDGE
) {
746 sec
= read_pci_config_byte(num
, slot
, func
, PCI_SECONDARY_BUS
);
748 early_pci_scan_bus(sec
);
757 static void __init
early_pci_scan_bus(int bus
)
761 /* Poor man's PCI discovery */
762 for (slot
= 0; slot
< 32; slot
++)
763 for (func
= 0; func
< 8; func
++) {
764 /* Only probe function 0 on single fn devices */
765 if (check_dev_quirk(bus
, slot
, func
))
770 void __init
early_quirks(void)
772 if (!early_pci_allowed())
775 early_pci_scan_bus(0);