2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
64 major You may use this parameter to override the
65 default major number (45) that this driver
66 will use. Be sure to change the device
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
100 In addition, you can use the parameter pd.disable to disable
107 1.01 GRG 1997.01.24 Restored pd_reset()
109 1.02 GRG 1998.05.06 SMP spinlock changes,
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
127 #include <linux/types.h>
129 static int verbose
= 0;
130 static int major
= PD_MAJOR
;
131 static char *name
= PD_NAME
;
132 static int cluster
= 64;
134 static int disable
= 0;
136 static int drive0
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
141 static int (*drives
[4])[8] = {&drive0
, &drive1
, &drive2
, &drive3
};
143 enum {D_PRT
, D_PRO
, D_UNI
, D_MOD
, D_GEO
, D_SBY
, D_DLY
, D_SLV
};
145 /* end of parameters */
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blkdev.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <linux/uaccess.h>
159 #include <linux/workqueue.h>
161 static DEFINE_MUTEX(pd_mutex
);
162 static DEFINE_SPINLOCK(pd_lock
);
164 module_param(verbose
, int, 0);
165 module_param(major
, int, 0);
166 module_param(name
, charp
, 0);
167 module_param(cluster
, int, 0);
168 module_param(nice
, int, 0);
169 module_param_array(drive0
, int, NULL
, 0);
170 module_param_array(drive1
, int, NULL
, 0);
171 module_param_array(drive2
, int, NULL
, 0);
172 module_param_array(drive3
, int, NULL
, 0);
178 /* numbers for "SCSI" geometry */
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
224 struct pi_adapter pia
; /* interface to paride layer */
225 struct pi_adapter
*pi
;
226 int access
; /* count of active opens ... */
227 int capacity
; /* Size of this volume in sectors */
228 int heads
; /* physical geometry */
232 int drive
; /* master=0 slave=1 */
233 int changed
; /* Have we seen a disk change ? */
234 int removable
; /* removable media device ? */
237 char name
[PD_NAMELEN
]; /* pda, pdb, etc ... */
241 static struct pd_unit pd
[PD_UNITS
];
243 static char pd_scratch
[512]; /* scratch block buffer */
245 static char *pd_errs
[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
246 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
247 "IDNF", "MC", "UNC", "???", "TMO"
250 static void *par_drv
; /* reference of parport driver */
252 static inline int status_reg(struct pd_unit
*disk
)
254 return pi_read_regr(disk
->pi
, 1, 6);
257 static inline int read_reg(struct pd_unit
*disk
, int reg
)
259 return pi_read_regr(disk
->pi
, 0, reg
);
262 static inline void write_status(struct pd_unit
*disk
, int val
)
264 pi_write_regr(disk
->pi
, 1, 6, val
);
267 static inline void write_reg(struct pd_unit
*disk
, int reg
, int val
)
269 pi_write_regr(disk
->pi
, 0, reg
, val
);
272 static inline u8
DRIVE(struct pd_unit
*disk
)
274 return 0xa0+0x10*disk
->drive
;
277 /* ide command interface */
279 static void pd_print_error(struct pd_unit
*disk
, char *msg
, int status
)
283 printk("%s: %s: status = 0x%x =", disk
->name
, msg
, status
);
284 for (i
= 0; i
< ARRAY_SIZE(pd_errs
); i
++)
285 if (status
& (1 << i
))
286 printk(" %s", pd_errs
[i
]);
290 static void pd_reset(struct pd_unit
*disk
)
291 { /* called only for MASTER drive */
292 write_status(disk
, 4);
294 write_status(disk
, 0);
298 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
300 static int pd_wait_for(struct pd_unit
*disk
, int w
, char *msg
)
305 while (k
< PD_SPIN
) {
306 r
= status_reg(disk
);
308 if (((r
& w
) == w
) && !(r
& STAT_BUSY
))
312 e
= (read_reg(disk
, 1) << 8) + read_reg(disk
, 7);
315 if ((e
& (STAT_ERR
| ERR_TMO
)) && (msg
!= NULL
))
316 pd_print_error(disk
, msg
, e
);
320 static void pd_send_command(struct pd_unit
*disk
, int n
, int s
, int h
, int c0
, int c1
, int func
)
322 write_reg(disk
, 6, DRIVE(disk
) + h
);
323 write_reg(disk
, 1, 0); /* the IDE task file */
324 write_reg(disk
, 2, n
);
325 write_reg(disk
, 3, s
);
326 write_reg(disk
, 4, c0
);
327 write_reg(disk
, 5, c1
);
328 write_reg(disk
, 7, func
);
333 static void pd_ide_command(struct pd_unit
*disk
, int func
, int block
, int count
)
339 c0
= (block
>>= 8) & 255;
340 c1
= (block
>>= 8) & 255;
341 h
= ((block
>>= 8) & 15) + 0x40;
343 s
= (block
% disk
->sectors
) + 1;
344 h
= (block
/= disk
->sectors
) % disk
->heads
;
345 c0
= (block
/= disk
->heads
) % 256;
348 pd_send_command(disk
, count
, s
, h
, c0
, c1
, func
);
351 /* The i/o request engine */
353 enum action
{Fail
= 0, Ok
= 1, Hold
, Wait
};
355 static struct request
*pd_req
; /* current request */
356 static enum action (*phase
)(void);
358 static void run_fsm(void);
360 static void ps_tq_int(struct work_struct
*work
);
362 static DECLARE_DELAYED_WORK(fsm_tq
, ps_tq_int
);
364 static void schedule_fsm(void)
367 schedule_delayed_work(&fsm_tq
, 0);
369 schedule_delayed_work(&fsm_tq
, nice
-1);
372 static void ps_tq_int(struct work_struct
*work
)
377 static enum action
do_pd_io_start(void);
378 static enum action
pd_special(void);
379 static enum action
do_pd_read_start(void);
380 static enum action
do_pd_write_start(void);
381 static enum action
do_pd_read_drq(void);
382 static enum action
do_pd_write_done(void);
385 static int pd_claimed
;
387 static struct pd_unit
*pd_current
; /* current request's drive */
388 static PIA
*pi_current
; /* current request's PIA */
390 static int set_next_request(void)
392 struct gendisk
*disk
;
393 struct request_queue
*q
;
394 int old_pos
= pd_queue
;
397 disk
= pd
[pd_queue
].gd
;
398 q
= disk
? disk
->queue
: NULL
;
399 if (++pd_queue
== PD_UNITS
)
402 pd_req
= blk_fetch_request(q
);
406 } while (pd_queue
!= old_pos
);
408 return pd_req
!= NULL
;
411 static void run_fsm(void)
415 unsigned long saved_flags
;
419 pd_current
= pd_req
->rq_disk
->private_data
;
420 pi_current
= pd_current
->pi
;
421 phase
= do_pd_io_start
;
424 switch (pd_claimed
) {
427 if (!pi_schedule_claimed(pi_current
, run_fsm
))
431 pi_current
->proto
->connect(pi_current
);
434 switch(res
= phase()) {
436 pi_disconnect(pi_current
);
439 spin_lock_irqsave(&pd_lock
, saved_flags
);
440 if (!__blk_end_request_cur(pd_req
,
441 res
== Ok
? 0 : BLK_STS_IOERR
)) {
442 if (!set_next_request())
445 spin_unlock_irqrestore(&pd_lock
, saved_flags
);
452 pi_disconnect(pi_current
);
458 static int pd_retries
= 0; /* i/o error retry count */
459 static int pd_block
; /* address of next requested block */
460 static int pd_count
; /* number of blocks still to do */
461 static int pd_run
; /* sectors in current cluster */
462 static char *pd_buf
; /* buffer for request in progress */
464 static enum action
do_pd_io_start(void)
466 switch (req_op(pd_req
)) {
472 pd_block
= blk_rq_pos(pd_req
);
473 pd_count
= blk_rq_cur_sectors(pd_req
);
474 if (pd_block
+ pd_count
> get_capacity(pd_req
->rq_disk
))
476 pd_run
= blk_rq_sectors(pd_req
);
477 pd_buf
= bio_data(pd_req
->bio
);
479 if (req_op(pd_req
) == REQ_OP_READ
)
480 return do_pd_read_start();
482 return do_pd_write_start();
487 static enum action
pd_special(void)
489 enum action (*func
)(struct pd_unit
*) = pd_req
->special
;
490 return func(pd_current
);
493 static int pd_next_buf(void)
495 unsigned long saved_flags
;
505 spin_lock_irqsave(&pd_lock
, saved_flags
);
506 __blk_end_request_cur(pd_req
, 0);
507 pd_count
= blk_rq_cur_sectors(pd_req
);
508 pd_buf
= bio_data(pd_req
->bio
);
509 spin_unlock_irqrestore(&pd_lock
, saved_flags
);
513 static unsigned long pd_timeout
;
515 static enum action
do_pd_read_start(void)
517 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_read") & STAT_ERR
) {
518 if (pd_retries
< PD_MAX_RETRIES
) {
524 pd_ide_command(pd_current
, IDE_READ
, pd_block
, pd_run
);
525 phase
= do_pd_read_drq
;
526 pd_timeout
= jiffies
+ PD_TMO
;
530 static enum action
do_pd_write_start(void)
532 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_write") & STAT_ERR
) {
533 if (pd_retries
< PD_MAX_RETRIES
) {
539 pd_ide_command(pd_current
, IDE_WRITE
, pd_block
, pd_run
);
541 if (pd_wait_for(pd_current
, STAT_DRQ
, "do_pd_write_drq") & STAT_ERR
) {
542 if (pd_retries
< PD_MAX_RETRIES
) {
548 pi_write_block(pd_current
->pi
, pd_buf
, 512);
552 phase
= do_pd_write_done
;
553 pd_timeout
= jiffies
+ PD_TMO
;
557 static inline int pd_ready(void)
559 return !(status_reg(pd_current
) & STAT_BUSY
);
562 static enum action
do_pd_read_drq(void)
564 if (!pd_ready() && !time_after_eq(jiffies
, pd_timeout
))
568 if (pd_wait_for(pd_current
, STAT_DRQ
, "do_pd_read_drq") & STAT_ERR
) {
569 if (pd_retries
< PD_MAX_RETRIES
) {
571 phase
= do_pd_read_start
;
576 pi_read_block(pd_current
->pi
, pd_buf
, 512);
583 static enum action
do_pd_write_done(void)
585 if (!pd_ready() && !time_after_eq(jiffies
, pd_timeout
))
588 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_write_done") & STAT_ERR
) {
589 if (pd_retries
< PD_MAX_RETRIES
) {
591 phase
= do_pd_write_start
;
599 /* special io requests */
601 /* According to the ATA standard, the default CHS geometry should be
602 available following a reset. Some Western Digital drives come up
603 in a mode where only LBA addresses are accepted until the device
604 parameters are initialised.
607 static void pd_init_dev_parms(struct pd_unit
*disk
)
609 pd_wait_for(disk
, 0, DBMSG("before init_dev_parms"));
610 pd_send_command(disk
, disk
->sectors
, 0, disk
->heads
- 1, 0, 0,
613 pd_wait_for(disk
, 0, "Initialise device parameters");
616 static enum action
pd_door_lock(struct pd_unit
*disk
)
618 if (!(pd_wait_for(disk
, STAT_READY
, "Lock") & STAT_ERR
)) {
619 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORLOCK
);
620 pd_wait_for(disk
, STAT_READY
, "Lock done");
625 static enum action
pd_door_unlock(struct pd_unit
*disk
)
627 if (!(pd_wait_for(disk
, STAT_READY
, "Lock") & STAT_ERR
)) {
628 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORUNLOCK
);
629 pd_wait_for(disk
, STAT_READY
, "Lock done");
634 static enum action
pd_eject(struct pd_unit
*disk
)
636 pd_wait_for(disk
, 0, DBMSG("before unlock on eject"));
637 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORUNLOCK
);
638 pd_wait_for(disk
, 0, DBMSG("after unlock on eject"));
639 pd_wait_for(disk
, 0, DBMSG("before eject"));
640 pd_send_command(disk
, 0, 0, 0, 0, 0, IDE_EJECT
);
641 pd_wait_for(disk
, 0, DBMSG("after eject"));
645 static enum action
pd_media_check(struct pd_unit
*disk
)
647 int r
= pd_wait_for(disk
, STAT_READY
, DBMSG("before media_check"));
648 if (!(r
& STAT_ERR
)) {
649 pd_send_command(disk
, 1, 1, 0, 0, 0, IDE_READ_VRFY
);
650 r
= pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after READ_VRFY"));
652 disk
->changed
= 1; /* say changed if other error */
655 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_ACKCHANGE
);
656 pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after ACKCHANGE"));
657 pd_send_command(disk
, 1, 1, 0, 0, 0, IDE_READ_VRFY
);
658 r
= pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after VRFY"));
663 static void pd_standby_off(struct pd_unit
*disk
)
665 pd_wait_for(disk
, 0, DBMSG("before STANDBY"));
666 pd_send_command(disk
, 0, 0, 0, 0, 0, IDE_STANDBY
);
667 pd_wait_for(disk
, 0, DBMSG("after STANDBY"));
670 static enum action
pd_identify(struct pd_unit
*disk
)
673 char id
[PD_ID_LEN
+ 1];
675 /* WARNING: here there may be dragons. reset() applies to both drives,
676 but we call it only on probing the MASTER. This should allow most
677 common configurations to work, but be warned that a reset can clear
678 settings on the SLAVE drive.
681 if (disk
->drive
== 0)
684 write_reg(disk
, 6, DRIVE(disk
));
685 pd_wait_for(disk
, 0, DBMSG("before IDENT"));
686 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_IDENTIFY
);
688 if (pd_wait_for(disk
, STAT_DRQ
, DBMSG("IDENT DRQ")) & STAT_ERR
)
690 pi_read_block(disk
->pi
, pd_scratch
, 512);
691 disk
->can_lba
= pd_scratch
[99] & 2;
692 disk
->sectors
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 12));
693 disk
->heads
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 6));
694 disk
->cylinders
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 2));
696 disk
->capacity
= le32_to_cpu(*(__le32
*) (pd_scratch
+ 120));
698 disk
->capacity
= disk
->sectors
* disk
->heads
* disk
->cylinders
;
700 for (j
= 0; j
< PD_ID_LEN
; j
++)
701 id
[j
^ 1] = pd_scratch
[j
+ PD_ID_OFF
];
703 while ((j
>= 0) && (id
[j
] <= 0x20))
708 disk
->removable
= pd_scratch
[0] & 0x80;
710 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
712 disk
->drive
? "slave" : "master",
713 disk
->capacity
, disk
->capacity
/ 2048,
714 disk
->cylinders
, disk
->heads
, disk
->sectors
,
715 disk
->removable
? "removable" : "fixed");
718 pd_init_dev_parms(disk
);
720 pd_standby_off(disk
);
725 /* end of io request engine */
727 static void do_pd_request(struct request_queue
* q
)
731 pd_req
= blk_fetch_request(q
);
738 static int pd_special_command(struct pd_unit
*disk
,
739 enum action (*func
)(struct pd_unit
*disk
))
743 rq
= blk_get_request(disk
->gd
->queue
, REQ_OP_DRV_IN
, __GFP_RECLAIM
);
748 blk_execute_rq(disk
->gd
->queue
, disk
->gd
, rq
, 0);
753 /* kernel glue structures */
755 static int pd_open(struct block_device
*bdev
, fmode_t mode
)
757 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
759 mutex_lock(&pd_mutex
);
762 if (disk
->removable
) {
763 pd_special_command(disk
, pd_media_check
);
764 pd_special_command(disk
, pd_door_lock
);
766 mutex_unlock(&pd_mutex
);
770 static int pd_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
772 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
774 if (disk
->alt_geom
) {
775 geo
->heads
= PD_LOG_HEADS
;
776 geo
->sectors
= PD_LOG_SECTS
;
777 geo
->cylinders
= disk
->capacity
/ (geo
->heads
* geo
->sectors
);
779 geo
->heads
= disk
->heads
;
780 geo
->sectors
= disk
->sectors
;
781 geo
->cylinders
= disk
->cylinders
;
787 static int pd_ioctl(struct block_device
*bdev
, fmode_t mode
,
788 unsigned int cmd
, unsigned long arg
)
790 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
794 mutex_lock(&pd_mutex
);
795 if (disk
->access
== 1)
796 pd_special_command(disk
, pd_eject
);
797 mutex_unlock(&pd_mutex
);
804 static void pd_release(struct gendisk
*p
, fmode_t mode
)
806 struct pd_unit
*disk
= p
->private_data
;
808 mutex_lock(&pd_mutex
);
809 if (!--disk
->access
&& disk
->removable
)
810 pd_special_command(disk
, pd_door_unlock
);
811 mutex_unlock(&pd_mutex
);
814 static unsigned int pd_check_events(struct gendisk
*p
, unsigned int clearing
)
816 struct pd_unit
*disk
= p
->private_data
;
818 if (!disk
->removable
)
820 pd_special_command(disk
, pd_media_check
);
823 return r
? DISK_EVENT_MEDIA_CHANGE
: 0;
826 static int pd_revalidate(struct gendisk
*p
)
828 struct pd_unit
*disk
= p
->private_data
;
829 if (pd_special_command(disk
, pd_identify
) == 0)
830 set_capacity(p
, disk
->capacity
);
836 static const struct block_device_operations pd_fops
= {
837 .owner
= THIS_MODULE
,
839 .release
= pd_release
,
842 .check_events
= pd_check_events
,
843 .revalidate_disk
= pd_revalidate
848 static void pd_probe_drive(struct pd_unit
*disk
)
850 struct gendisk
*p
= alloc_disk(1 << PD_BITS
);
853 strcpy(p
->disk_name
, disk
->name
);
856 p
->first_minor
= (disk
- pd
) << PD_BITS
;
858 p
->private_data
= disk
;
859 p
->queue
= blk_init_queue(do_pd_request
, &pd_lock
);
865 blk_queue_max_hw_sectors(p
->queue
, cluster
);
866 blk_queue_bounce_limit(p
->queue
, BLK_BOUNCE_HIGH
);
868 if (disk
->drive
== -1) {
869 for (disk
->drive
= 0; disk
->drive
<= 1; disk
->drive
++)
870 if (pd_special_command(disk
, pd_identify
) == 0)
872 } else if (pd_special_command(disk
, pd_identify
) == 0)
878 static int pd_detect(void)
880 int found
= 0, unit
, pd_drive_count
= 0;
881 struct pd_unit
*disk
;
883 for (unit
= 0; unit
< PD_UNITS
; unit
++) {
884 int *parm
= *drives
[unit
];
885 struct pd_unit
*disk
= pd
+ unit
;
886 disk
->pi
= &disk
->pia
;
890 disk
->drive
= parm
[D_SLV
];
891 snprintf(disk
->name
, PD_NAMELEN
, "%s%c", name
, 'a'+unit
);
892 disk
->alt_geom
= parm
[D_GEO
];
893 disk
->standby
= parm
[D_SBY
];
898 par_drv
= pi_register_driver(name
);
900 pr_err("failed to register %s driver\n", name
);
904 if (pd_drive_count
== 0) { /* nothing spec'd - so autoprobe for 1 */
906 if (pi_init(disk
->pi
, 1, -1, -1, -1, -1, -1, pd_scratch
,
907 PI_PD
, verbose
, disk
->name
)) {
908 pd_probe_drive(disk
);
910 pi_release(disk
->pi
);
914 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
915 int *parm
= *drives
[unit
];
918 if (pi_init(disk
->pi
, 0, parm
[D_PRT
], parm
[D_MOD
],
919 parm
[D_UNI
], parm
[D_PRO
], parm
[D_DLY
],
920 pd_scratch
, PI_PD
, verbose
, disk
->name
)) {
921 pd_probe_drive(disk
);
923 pi_release(disk
->pi
);
927 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
929 set_capacity(disk
->gd
, disk
->capacity
);
935 printk("%s: no valid drive found\n", name
);
936 pi_unregister_driver(par_drv
);
941 static int __init
pd_init(void)
946 if (register_blkdev(major
, name
))
949 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
950 name
, name
, PD_VERSION
, major
, cluster
, nice
);
957 unregister_blkdev(major
, name
);
962 static void __exit
pd_exit(void)
964 struct pd_unit
*disk
;
966 unregister_blkdev(major
, name
);
967 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
968 struct gendisk
*p
= disk
->gd
;
972 blk_cleanup_queue(p
->queue
);
974 pi_release(disk
->pi
);
979 MODULE_LICENSE("GPL");