drivers/gpio/gpio-wcove.c

   1 /*
   2  * Intel Whiskey Cove PMIC GPIO Driver
   3  *
   4  * This driver is written based on gpio-crystalcove.c
   5  *
   6  * Copyright (C) 2016 Intel Corporation. All rights reserved.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License version
  10  * 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  */
  17
  18 #include <linux/bitops.h>
  19 #include <linux/module.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/gpio/driver.h>
  22 #include <linux/mfd/intel_soc_pmic.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/regmap.h>
  25 #include <linux/seq_file.h>
  26
  27 /*
  28  * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
  29  * Bank 0: Pin 0 - 6
  30  * Bank 1: Pin 7 - 10
  31  * Bank 2: Pin 11 -12
  32  * Each pin has one output control register and one input control register.
  33  */
  34 #define BANK0_NR_PINS           7
  35 #define BANK1_NR_PINS           4
  36 #define BANK2_NR_PINS           2
  37 #define WCOVE_GPIO_NUM          (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS)
  38 #define WCOVE_VGPIO_NUM         94
  39 /* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */
  40 #define GPIO_OUT_CTRL_BASE      0x4e44
  41 /* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */
  42 #define GPIO_IN_CTRL_BASE       0x4e51
  43
  44 /*
  45  * GPIO interrupts are organized in two groups:
  46  * Group 0: Bank 0 pins (Pin 0 - 6)
  47  * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12)
  48  * Each group has two registers (one bit per pin): status and mask.
  49  */
  50 #define GROUP0_NR_IRQS          7
  51 #define GROUP1_NR_IRQS          6
  52 #define IRQ_MASK_BASE           0x4e19
  53 #define IRQ_STATUS_BASE         0x4e0b
  54 #define GPIO_IRQ0_MASK          GENMASK(6, 0)
  55 #define GPIO_IRQ1_MASK          GENMASK(5, 0)
  56 #define UPDATE_IRQ_TYPE         BIT(0)
  57 #define UPDATE_IRQ_MASK         BIT(1)
  58
  59 #define CTLI_INTCNT_DIS         (0 << 1)
  60 #define CTLI_INTCNT_NE          (1 << 1)
  61 #define CTLI_INTCNT_PE          (2 << 1)
  62 #define CTLI_INTCNT_BE          (3 << 1)
  63
  64 #define CTLO_DIR_IN             (0 << 5)
  65 #define CTLO_DIR_OUT            (1 << 5)
  66
  67 #define CTLO_DRV_MASK           (1 << 4)
  68 #define CTLO_DRV_OD             (0 << 4)
  69 #define CTLO_DRV_CMOS           (1 << 4)
  70
  71 #define CTLO_DRV_REN            (1 << 3)
  72
  73 #define CTLO_RVAL_2KDOWN        (0 << 1)
  74 #define CTLO_RVAL_2KUP          (1 << 1)
  75 #define CTLO_RVAL_50KDOWN       (2 << 1)
  76 #define CTLO_RVAL_50KUP         (3 << 1)
  77
  78 #define CTLO_INPUT_SET  (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
  79 #define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
  80
  81 enum ctrl_register {
  82         CTRL_IN,
  83         CTRL_OUT,
  84 };
  85
  86 /*
  87  * struct wcove_gpio - Whiskey Cove GPIO controller
  88  * @buslock: for bus lock/sync and unlock.
  89  * @chip: the abstract gpio_chip structure.
  90  * @dev: the gpio device
  91  * @regmap: the regmap from the parent device.
  92  * @regmap_irq_chip: the regmap of the gpio irq chip.
  93  * @update: pending IRQ setting update, to be written to the chip upon unlock.
  94  * @intcnt: the Interrupt Detect value to be written.
  95  * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
  96  */
  97 struct wcove_gpio {
  98         struct mutex buslock;
  99         struct gpio_chip chip;
 100         struct device *dev;
 101         struct regmap *regmap;
 102         struct regmap_irq_chip_data *regmap_irq_chip;
 103         int update;
 104         int intcnt;
 105         bool set_irq_mask;
 106 };
 107
 108 static inline unsigned int to_reg(int gpio, enum ctrl_register reg_type)
 109 {
 110         unsigned int reg;
 111
 112         if (gpio >= WCOVE_GPIO_NUM)
 113                 return -EOPNOTSUPP;
 114
 115         if (reg_type == CTRL_IN)
 116                 reg = GPIO_IN_CTRL_BASE + gpio;
 117         else
 118                 reg = GPIO_OUT_CTRL_BASE + gpio;
 119
 120         return reg;
 121 }
 122
 123 static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
 124 {
 125         unsigned int reg, mask;
 126
 127         if (gpio < GROUP0_NR_IRQS) {
 128                 reg = IRQ_MASK_BASE;
 129                 mask = BIT(gpio % GROUP0_NR_IRQS);
 130         } else {
 131                 reg = IRQ_MASK_BASE + 1;
 132                 mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS);
 133         }
 134
 135         if (wg->set_irq_mask)
 136                 regmap_update_bits(wg->regmap, reg, mask, mask);
 137         else
 138                 regmap_update_bits(wg->regmap, reg, mask, 0);
 139 }
 140
 141 static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio)
 142 {
 143         int reg = to_reg(gpio, CTRL_IN);
 144
 145         if (reg < 0)
 146                 return;
 147
 148         regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt);
 149 }
 150
 151 static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
 152 {
 153         struct wcove_gpio *wg = gpiochip_get_data(chip);
 154         int reg = to_reg(gpio, CTRL_OUT);
 155
 156         if (reg < 0)
 157                 return 0;
 158
 159         return regmap_write(wg->regmap, reg, CTLO_INPUT_SET);
 160 }
 161
 162 static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
 163                                     int value)
 164 {
 165         struct wcove_gpio *wg = gpiochip_get_data(chip);
 166         int reg = to_reg(gpio, CTRL_OUT);
 167
 168         if (reg < 0)
 169                 return 0;
 170
 171         return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value);
 172 }
 173
 174 static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
 175 {
 176         struct wcove_gpio *wg = gpiochip_get_data(chip);
 177         unsigned int val;
 178         int ret, reg = to_reg(gpio, CTRL_OUT);
 179
 180         if (reg < 0)
 181                 return 0;
 182
 183         ret = regmap_read(wg->regmap, reg, &val);
 184         if (ret)
 185                 return ret;
 186
 187         return !(val & CTLO_DIR_OUT);
 188 }
 189
 190 static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
 191 {
 192         struct wcove_gpio *wg = gpiochip_get_data(chip);
 193         unsigned int val;
 194         int ret, reg = to_reg(gpio, CTRL_IN);
 195
 196         if (reg < 0)
 197                 return 0;
 198
 199         ret = regmap_read(wg->regmap, reg, &val);
 200         if (ret)
 201                 return ret;
 202
 203         return val & 0x1;
 204 }
 205
 206 static void wcove_gpio_set(struct gpio_chip *chip,
 207                                  unsigned int gpio, int value)
 208 {
 209         struct wcove_gpio *wg = gpiochip_get_data(chip);
 210         int reg = to_reg(gpio, CTRL_OUT);
 211
 212         if (reg < 0)
 213                 return;
 214
 215         if (value)
 216                 regmap_update_bits(wg->regmap, reg, 1, 1);
 217         else
 218                 regmap_update_bits(wg->regmap, reg, 1, 0);
 219 }
 220
 221 static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
 222                                  unsigned long config)
 223 {
 224         struct wcove_gpio *wg = gpiochip_get_data(chip);
 225         int reg = to_reg(gpio, CTRL_OUT);
 226
 227         if (reg < 0)
 228                 return 0;
 229
 230         switch (pinconf_to_config_param(config)) {
 231         case PIN_CONFIG_DRIVE_OPEN_DRAIN:
 232                 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
 233                                           CTLO_DRV_OD);
 234         case PIN_CONFIG_DRIVE_PUSH_PULL:
 235                 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
 236                                           CTLO_DRV_CMOS);
 237         default:
 238                 break;
 239         }
 240
 241         return -ENOTSUPP;
 242 }
 243
 244 static int wcove_irq_type(struct irq_data *data, unsigned int type)
 245 {
 246         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 247         struct wcove_gpio *wg = gpiochip_get_data(chip);
 248
 249         if (data->hwirq >= WCOVE_GPIO_NUM)
 250                 return 0;
 251
 252         switch (type) {
 253         case IRQ_TYPE_NONE:
 254                 wg->intcnt = CTLI_INTCNT_DIS;
 255                 break;
 256         case IRQ_TYPE_EDGE_BOTH:
 257                 wg->intcnt = CTLI_INTCNT_BE;
 258                 break;
 259         case IRQ_TYPE_EDGE_RISING:
 260                 wg->intcnt = CTLI_INTCNT_PE;
 261                 break;
 262         case IRQ_TYPE_EDGE_FALLING:
 263                 wg->intcnt = CTLI_INTCNT_NE;
 264                 break;
 265         default:
 266                 return -EINVAL;
 267         }
 268
 269         wg->update |= UPDATE_IRQ_TYPE;
 270
 271         return 0;
 272 }
 273
 274 static void wcove_bus_lock(struct irq_data *data)
 275 {
 276         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 277         struct wcove_gpio *wg = gpiochip_get_data(chip);
 278
 279         mutex_lock(&wg->buslock);
 280 }
 281
 282 static void wcove_bus_sync_unlock(struct irq_data *data)
 283 {
 284         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 285         struct wcove_gpio *wg = gpiochip_get_data(chip);
 286         int gpio = data->hwirq;
 287
 288         if (wg->update & UPDATE_IRQ_TYPE)
 289                 wcove_update_irq_ctrl(wg, gpio);
 290         if (wg->update & UPDATE_IRQ_MASK)
 291                 wcove_update_irq_mask(wg, gpio);
 292         wg->update = 0;
 293
 294         mutex_unlock(&wg->buslock);
 295 }
 296
 297 static void wcove_irq_unmask(struct irq_data *data)
 298 {
 299         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 300         struct wcove_gpio *wg = gpiochip_get_data(chip);
 301
 302         if (data->hwirq >= WCOVE_GPIO_NUM)
 303                 return;
 304
 305         wg->set_irq_mask = false;
 306         wg->update |= UPDATE_IRQ_MASK;
 307 }
 308
 309 static void wcove_irq_mask(struct irq_data *data)
 310 {
 311         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 312         struct wcove_gpio *wg = gpiochip_get_data(chip);
 313
 314         if (data->hwirq >= WCOVE_GPIO_NUM)
 315                 return;
 316
 317         wg->set_irq_mask = true;
 318         wg->update |= UPDATE_IRQ_MASK;
 319 }
 320
 321 static struct irq_chip wcove_irqchip = {
 322         .name                   = "Whiskey Cove",
 323         .irq_mask               = wcove_irq_mask,
 324         .irq_unmask             = wcove_irq_unmask,
 325         .irq_set_type           = wcove_irq_type,
 326         .irq_bus_lock           = wcove_bus_lock,
 327         .irq_bus_sync_unlock    = wcove_bus_sync_unlock,
 328 };
 329
 330 static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
 331 {
 332         struct wcove_gpio *wg = (struct wcove_gpio *)data;
 333         unsigned int pending, virq, gpio, mask, offset;
 334         u8 p[2];
 335
 336         if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
 337                 dev_err(wg->dev, "Failed to read irq status register\n");
 338                 return IRQ_NONE;
 339         }
 340
 341         pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
 342         if (!pending)
 343                 return IRQ_NONE;
 344
 345         /* Iterate until no interrupt is pending */
 346         while (pending) {
 347                 /* One iteration is for all pending bits */
 348                 for_each_set_bit(gpio, (const unsigned long *)&pending,
 349                                                  WCOVE_GPIO_NUM) {
 350                         offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
 351                         mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
 352                                                                 BIT(gpio);
 353                         virq = irq_find_mapping(wg->chip.irq.domain, gpio);
 354                         handle_nested_irq(virq);
 355                         regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset,
 356                                                                 mask, mask);
 357                 }
 358
 359                 /* Next iteration */
 360                 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
 361                         dev_err(wg->dev, "Failed to read irq status\n");
 362                         break;
 363                 }
 364
 365                 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
 366         }
 367
 368         return IRQ_HANDLED;
 369 }
 370
 371 static void wcove_gpio_dbg_show(struct seq_file *s,
 372                                       struct gpio_chip *chip)
 373 {
 374         unsigned int ctlo, ctli, irq_mask, irq_status;
 375         struct wcove_gpio *wg = gpiochip_get_data(chip);
 376         int gpio, offset, group, ret = 0;
 377
 378         for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
 379                 group = gpio < GROUP0_NR_IRQS ? 0 : 1;
 380                 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
 381                 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
 382                 ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group,
 383                                                         &irq_mask);
 384                 ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group,
 385                                                         &irq_status);
 386                 if (ret) {
 387                         pr_err("Failed to read registers: ctrl out/in or irq status/mask\n");
 388                         break;
 389                 }
 390
 391                 offset = gpio % 8;
 392                 seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
 393                            gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
 394                            ctli & 0x1 ? "hi" : "lo",
 395                            ctli & CTLI_INTCNT_NE ? "fall" : "    ",
 396                            ctli & CTLI_INTCNT_PE ? "rise" : "    ",
 397                            ctlo,
 398                            irq_mask & BIT(offset) ? "mask  " : "unmask",
 399                            irq_status & BIT(offset) ? "pending" : "       ");
 400         }
 401 }
 402
 403 static int wcove_gpio_probe(struct platform_device *pdev)
 404 {
 405         struct intel_soc_pmic *pmic;
 406         struct wcove_gpio *wg;
 407         int virq, ret, irq;
 408         struct device *dev;
 409
 410         /*
 411          * This gpio platform device is created by a mfd device (see
 412          * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information
 413          * shared by all sub-devices created by the mfd device, the regmap
 414          * pointer for instance, is stored as driver data of the mfd device
 415          * driver.
 416          */
 417         pmic = dev_get_drvdata(pdev->dev.parent);
 418         if (!pmic)
 419                 return -ENODEV;
 420
 421         irq = platform_get_irq(pdev, 0);
 422         if (irq < 0)
 423                 return irq;
 424
 425         dev = &pdev->dev;
 426
 427         wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL);
 428         if (!wg)
 429                 return -ENOMEM;
 430
 431         wg->regmap_irq_chip = pmic->irq_chip_data;
 432
 433         platform_set_drvdata(pdev, wg);
 434
 435         mutex_init(&wg->buslock);
 436         wg->chip.label = KBUILD_MODNAME;
 437         wg->chip.direction_input = wcove_gpio_dir_in;
 438         wg->chip.direction_output = wcove_gpio_dir_out;
 439         wg->chip.get_direction = wcove_gpio_get_direction;
 440         wg->chip.get = wcove_gpio_get;
 441         wg->chip.set = wcove_gpio_set;
 442         wg->chip.set_config = wcove_gpio_set_config,
 443         wg->chip.base = -1;
 444         wg->chip.ngpio = WCOVE_VGPIO_NUM;
 445         wg->chip.can_sleep = true;
 446         wg->chip.parent = pdev->dev.parent;
 447         wg->chip.dbg_show = wcove_gpio_dbg_show;
 448         wg->dev = dev;
 449         wg->regmap = pmic->regmap;
 450
 451         ret = devm_gpiochip_add_data(dev, &wg->chip, wg);
 452         if (ret) {
 453                 dev_err(dev, "Failed to add gpiochip: %d\n", ret);
 454                 return ret;
 455         }
 456
 457         ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0,
 458                                           handle_simple_irq, IRQ_TYPE_NONE);
 459         if (ret) {
 460                 dev_err(dev, "Failed to add irqchip: %d\n", ret);
 461                 return ret;
 462         }
 463
 464         virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq);
 465         if (virq < 0) {
 466                 dev_err(dev, "Failed to get virq by irq %d\n", irq);
 467                 return virq;
 468         }
 469
 470         ret = devm_request_threaded_irq(dev, virq, NULL,
 471                 wcove_gpio_irq_handler, IRQF_ONESHOT, pdev->name, wg);
 472         if (ret) {
 473                 dev_err(dev, "Failed to request irq %d\n", virq);
 474                 return ret;
 475         }
 476
 477         gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq);
 478
 479         /* Enable GPIO0 interrupts */
 480         ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK,
 481                                  0x00);
 482         if (ret)
 483                 return ret;
 484
 485         /* Enable GPIO1 interrupts */
 486         ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK,
 487                                  0x00);
 488         if (ret)
 489                 return ret;
 490
 491         return 0;
 492 }
 493
 494 /*
 495  * Whiskey Cove PMIC itself is a analog device(but with digital control
 496  * interface) providing power management support for other devices in
 497  * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver.
 498  */
 499 static struct platform_driver wcove_gpio_driver = {
 500         .driver = {
 501                 .name = "bxt_wcove_gpio",
 502         },
 503         .probe = wcove_gpio_probe,
 504 };
 505
 506 module_platform_driver(wcove_gpio_driver);
 507
 508 MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>");
 509 MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>");
 510 MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver");
 511 MODULE_LICENSE("GPL v2");
 512 MODULE_ALIAS("platform:bxt_wcove_gpio");