Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[cris-mirror.git] / drivers / media / usb / dvb-usb-v2 / af9035.h
bloba76e6bf0ab1ee13801241dd3b912994e4e05dab8
1 /*
2 * Afatech AF9035 DVB USB driver
4 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
5 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
22 #ifndef AF9035_H
23 #define AF9035_H
25 #include <linux/platform_device.h>
26 #include "dvb_usb.h"
27 #include "af9033.h"
28 #include "tua9001.h"
29 #include "fc0011.h"
30 #include "fc0012.h"
31 #include "mxl5007t.h"
32 #include "tda18218.h"
33 #include "fc2580.h"
34 #include "it913x.h"
35 #include "si2168.h"
36 #include "si2157.h"
38 struct reg_val {
39 u32 reg;
40 u8 val;
43 struct reg_val_mask {
44 u32 reg;
45 u8 val;
46 u8 mask;
49 struct usb_req {
50 u8 cmd;
51 u8 mbox;
52 u8 wlen;
53 u8 *wbuf;
54 u8 rlen;
55 u8 *rbuf;
58 struct state {
59 #define BUF_LEN 64
60 u8 buf[BUF_LEN];
61 u8 seq; /* packet sequence number */
62 u8 prechip_version;
63 u8 chip_version;
64 u16 chip_type;
65 u8 eeprom[256];
66 bool no_eeprom;
67 u8 ir_mode;
68 u8 ir_type;
69 u8 dual_mode:1;
70 u8 no_read:1;
71 u8 af9033_i2c_addr[2];
72 struct af9033_config af9033_config[2];
73 struct af9033_ops ops;
74 #define AF9035_I2C_CLIENT_MAX 4
75 struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
76 struct i2c_adapter *i2c_adapter_demod;
77 struct platform_device *platform_device_tuner[2];
80 static const u32 clock_lut_af9035[] = {
81 20480000, /* FPGA */
82 16384000, /* 16.38 MHz */
83 20480000, /* 20.48 MHz */
84 36000000, /* 36.00 MHz */
85 30000000, /* 30.00 MHz */
86 26000000, /* 26.00 MHz */
87 28000000, /* 28.00 MHz */
88 32000000, /* 32.00 MHz */
89 34000000, /* 34.00 MHz */
90 24000000, /* 24.00 MHz */
91 22000000, /* 22.00 MHz */
92 12000000, /* 12.00 MHz */
95 static const u32 clock_lut_it9135[] = {
96 12000000, /* 12.00 MHz */
97 20480000, /* 20.48 MHz */
98 36000000, /* 36.00 MHz */
99 30000000, /* 30.00 MHz */
100 26000000, /* 26.00 MHz */
101 28000000, /* 28.00 MHz */
102 32000000, /* 32.00 MHz */
103 34000000, /* 34.00 MHz */
104 24000000, /* 24.00 MHz */
105 22000000, /* 22.00 MHz */
108 #define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
109 #define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
110 #define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
111 #define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
114 * eeprom is memory mapped as read only. Writing that memory mapped address
115 * will not corrupt eeprom.
117 * TS mode:
118 * 0 TS
119 * 1 DCA + PIP
120 * 3 PIP
121 * 5 DCA + PIP (AF9035 only)
122 * n DCA
124 * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
127 #define EEPROM_BASE_AF9035 0x42f5
128 #define EEPROM_BASE_IT9135 0x4994
129 #define EEPROM_SHIFT 0x10
131 #define EEPROM_IR_MODE 0x18
132 #define EEPROM_TS_MODE 0x31
133 #define EEPROM_2ND_DEMOD_ADDR 0x32
134 #define EEPROM_IR_TYPE 0x34
135 #define EEPROM_1_IF_L 0x38
136 #define EEPROM_1_IF_H 0x39
137 #define EEPROM_1_TUNER_ID 0x3c
138 #define EEPROM_2_IF_L 0x48
139 #define EEPROM_2_IF_H 0x49
140 #define EEPROM_2_TUNER_ID 0x4c
142 /* USB commands */
143 #define CMD_MEM_RD 0x00
144 #define CMD_MEM_WR 0x01
145 #define CMD_I2C_RD 0x02
146 #define CMD_I2C_WR 0x03
147 #define CMD_IR_GET 0x18
148 #define CMD_FW_DL 0x21
149 #define CMD_FW_QUERYINFO 0x22
150 #define CMD_FW_BOOT 0x23
151 #define CMD_FW_DL_BEGIN 0x24
152 #define CMD_FW_DL_END 0x25
153 #define CMD_FW_SCATTER_WR 0x29
154 #define CMD_GENERIC_I2C_RD 0x2a
155 #define CMD_GENERIC_I2C_WR 0x2b
157 #endif