drivers/misc/ioc4.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2005-2006 Silicon Graphics, Inc.  All Rights Reserved.
   7  */
   8
   9 /* This file contains the master driver module for use by SGI IOC4 subdrivers.
  10  *
  11  * It allocates any resources shared between multiple subdevices, and
  12  * provides accessor functions (where needed) and the like for those
  13  * resources.  It also provides a mechanism for the subdevice modules
  14  * to support loading and unloading.
  15  *
  16  * Non-shared resources (e.g. external interrupt A_INT_OUT register page
  17  * alias, serial port and UART registers) are handled by the subdevice
  18  * modules themselves.
  19  *
  20  * This is all necessary because IOC4 is not implemented as a multi-function
  21  * PCI device, but an amalgamation of disparate registers for several
  22  * types of device (ATA, serial, external interrupts).  The normal
  23  * resource management in the kernel doesn't have quite the right interfaces
  24  * to handle this situation (e.g. multiple modules can't claim the same
  25  * PCI ID), thus this IOC4 master module.
  26  */
  27
  28 #include <linux/errno.h>
  29 #include <linux/module.h>
  30 #include <linux/pci.h>
  31 #include <linux/ioc4.h>
  32 #include <linux/ktime.h>
  33 #include <linux/slab.h>
  34 #include <linux/mutex.h>
  35 #include <linux/time.h>
  36 #include <asm/io.h>
  37
  38 /***************
  39  * Definitions *
  40  ***************/
  41
  42 /* Tweakable values */
  43
  44 /* PCI bus speed detection/calibration */
  45 #define IOC4_CALIBRATE_COUNT 63         /* Calibration cycle period */
  46 #define IOC4_CALIBRATE_CYCLES 256       /* Average over this many cycles */
  47 #define IOC4_CALIBRATE_DISCARD 2        /* Discard first few cycles */
  48 #define IOC4_CALIBRATE_LOW_MHZ 25       /* Lower bound on bus speed sanity */
  49 #define IOC4_CALIBRATE_HIGH_MHZ 75      /* Upper bound on bus speed sanity */
  50 #define IOC4_CALIBRATE_DEFAULT_MHZ 66   /* Assumed if sanity check fails */
  51
  52 /************************
  53  * Submodule management *
  54  ************************/
  55
  56 static DEFINE_MUTEX(ioc4_mutex);
  57
  58 static LIST_HEAD(ioc4_devices);
  59 static LIST_HEAD(ioc4_submodules);
  60
  61 /* Register an IOC4 submodule */
  62 int
  63 ioc4_register_submodule(struct ioc4_submodule *is)
  64 {
  65         struct ioc4_driver_data *idd;
  66
  67         mutex_lock(&ioc4_mutex);
  68         list_add(&is->is_list, &ioc4_submodules);
  69
  70         /* Initialize submodule for each IOC4 */
  71         if (!is->is_probe)
  72                 goto out;
  73
  74         list_for_each_entry(idd, &ioc4_devices, idd_list) {
  75                 if (is->is_probe(idd)) {
  76                         printk(KERN_WARNING
  77                                "%s: IOC4 submodule %s probe failed "
  78                                "for pci_dev %s",
  79                                __func__, module_name(is->is_owner),
  80                                pci_name(idd->idd_pdev));
  81                 }
  82         }
  83  out:
  84         mutex_unlock(&ioc4_mutex);
  85         return 0;
  86 }
  87
  88 /* Unregister an IOC4 submodule */
  89 void
  90 ioc4_unregister_submodule(struct ioc4_submodule *is)
  91 {
  92         struct ioc4_driver_data *idd;
  93
  94         mutex_lock(&ioc4_mutex);
  95         list_del(&is->is_list);
  96
  97         /* Remove submodule for each IOC4 */
  98         if (!is->is_remove)
  99                 goto out;
 100
 101         list_for_each_entry(idd, &ioc4_devices, idd_list) {
 102                 if (is->is_remove(idd)) {
 103                         printk(KERN_WARNING
 104                                "%s: IOC4 submodule %s remove failed "
 105                                "for pci_dev %s.\n",
 106                                __func__, module_name(is->is_owner),
 107                                pci_name(idd->idd_pdev));
 108                 }
 109         }
 110  out:
 111         mutex_unlock(&ioc4_mutex);
 112 }
 113
 114 /*********************
 115  * Device management *
 116  *********************/
 117
 118 #define IOC4_CALIBRATE_LOW_LIMIT \
 119         (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_LOW_MHZ)
 120 #define IOC4_CALIBRATE_HIGH_LIMIT \
 121         (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_HIGH_MHZ)
 122 #define IOC4_CALIBRATE_DEFAULT \
 123         (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_DEFAULT_MHZ)
 124
 125 #define IOC4_CALIBRATE_END \
 126         (IOC4_CALIBRATE_CYCLES + IOC4_CALIBRATE_DISCARD)
 127
 128 #define IOC4_INT_OUT_MODE_TOGGLE 0x7    /* Toggle INT_OUT every COUNT+1 ticks */
 129
 130 /* Determines external interrupt output clock period of the PCI bus an
 131  * IOC4 is attached to.  This value can be used to determine the PCI
 132  * bus speed.
 133  *
 134  * IOC4 has a design feature that various internal timers are derived from
 135  * the PCI bus clock.  This causes IOC4 device drivers to need to take the
 136  * bus speed into account when setting various register values (e.g. INT_OUT
 137  * register COUNT field, UART divisors, etc).  Since this information is
 138  * needed by several subdrivers, it is determined by the main IOC4 driver,
 139  * even though the following code utilizes external interrupt registers
 140  * to perform the speed calculation.
 141  */
 142 static void
 143 ioc4_clock_calibrate(struct ioc4_driver_data *idd)
 144 {
 145         union ioc4_int_out int_out;
 146         union ioc4_gpcr gpcr;
 147         unsigned int state, last_state;
 148         uint64_t start, end, period;
 149         unsigned int count;
 150
 151         /* Enable output */
 152         gpcr.raw = 0;
 153         gpcr.fields.dir = IOC4_GPCR_DIR_0;
 154         gpcr.fields.int_out_en = 1;
 155         writel(gpcr.raw, &idd->idd_misc_regs->gpcr_s.raw);
 156
 157         /* Reset to power-on state */
 158         writel(0, &idd->idd_misc_regs->int_out.raw);
 159         mmiowb();
 160
 161         /* Set up square wave */
 162         int_out.raw = 0;
 163         int_out.fields.count = IOC4_CALIBRATE_COUNT;
 164         int_out.fields.mode = IOC4_INT_OUT_MODE_TOGGLE;
 165         int_out.fields.diag = 0;
 166         writel(int_out.raw, &idd->idd_misc_regs->int_out.raw);
 167         mmiowb();
 168
 169         /* Check square wave period averaged over some number of cycles */
 170         start = ktime_get_ns();
 171         state = 1; /* make sure the first read isn't a rising edge */
 172         for (count = 0; count <= IOC4_CALIBRATE_END; count++) {
 173                 do { /* wait for a rising edge */
 174                         last_state = state;
 175                         int_out.raw = readl(&idd->idd_misc_regs->int_out.raw);
 176                         state = int_out.fields.int_out;
 177                 } while (last_state || !state);
 178
 179                 /* discard the first few cycles */
 180                 if (count == IOC4_CALIBRATE_DISCARD)
 181                         start = ktime_get_ns();
 182         }
 183         end = ktime_get_ns();
 184
 185         /* Calculation rearranged to preserve intermediate precision.
 186          * Logically:
 187          * 1. "end - start" gives us the measurement period over all
 188          *    the square wave cycles.
 189          * 2. Divide by number of square wave cycles to get the period
 190          *    of a square wave cycle.
 191          * 3. Divide by 2*(int_out.fields.count+1), which is the formula
 192          *    by which the IOC4 generates the square wave, to get the
 193          *    period of an IOC4 INT_OUT count.
 194          */
 195         period = (end - start) /
 196                 (IOC4_CALIBRATE_CYCLES * 2 * (IOC4_CALIBRATE_COUNT + 1));
 197
 198         /* Bounds check the result. */
 199         if (period > IOC4_CALIBRATE_LOW_LIMIT ||
 200             period < IOC4_CALIBRATE_HIGH_LIMIT) {
 201                 printk(KERN_INFO
 202                        "IOC4 %s: Clock calibration failed.  Assuming"
 203                        "PCI clock is %d ns.\n",
 204                        pci_name(idd->idd_pdev),
 205                        IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR);
 206                 period = IOC4_CALIBRATE_DEFAULT;
 207         } else {
 208                 u64 ns = period;
 209
 210                 do_div(ns, IOC4_EXTINT_COUNT_DIVISOR);
 211                 printk(KERN_DEBUG
 212                        "IOC4 %s: PCI clock is %llu ns.\n",
 213                        pci_name(idd->idd_pdev), (unsigned long long)ns);
 214         }
 215
 216         /* Remember results.  We store the extint clock period rather
 217          * than the PCI clock period so that greater precision is
 218          * retained.  Divide by IOC4_EXTINT_COUNT_DIVISOR to get
 219          * PCI clock period.
 220          */
 221         idd->count_period = period;
 222 }
 223
 224 /* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT.
 225  * Each brings out different combinations of IOC4 signals, thus.
 226  * the IOC4 subdrivers need to know to which we're attached.
 227  *
 228  * We look for the presence of a SCSI (IO9) or SATA (IO10) controller
 229  * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
 230  * If neither is present, it's a PCI-RT.
 231  */
 232 static unsigned int
 233 ioc4_variant(struct ioc4_driver_data *idd)
 234 {
 235         struct pci_dev *pdev = NULL;
 236         int found = 0;
 237
 238         /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */
 239         do {
 240                 pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC,
 241                                       PCI_DEVICE_ID_QLOGIC_ISP12160, pdev);
 242                 if (pdev &&
 243                     idd->idd_pdev->bus->number == pdev->bus->number &&
 244                     3 == PCI_SLOT(pdev->devfn))
 245                         found = 1;
 246         } while (pdev && !found);
 247         if (NULL != pdev) {
 248                 pci_dev_put(pdev);
 249                 return IOC4_VARIANT_IO9;
 250         }
 251
 252         /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */
 253         pdev = NULL;
 254         do {
 255                 pdev = pci_get_device(PCI_VENDOR_ID_VITESSE,
 256                                       PCI_DEVICE_ID_VITESSE_VSC7174, pdev);
 257                 if (pdev &&
 258                     idd->idd_pdev->bus->number == pdev->bus->number &&
 259                     3 == PCI_SLOT(pdev->devfn))
 260                         found = 1;
 261         } while (pdev && !found);
 262         if (NULL != pdev) {
 263                 pci_dev_put(pdev);
 264                 return IOC4_VARIANT_IO10;
 265         }
 266
 267         /* PCI-RT: No SCSI/SATA controller will be present */
 268         return IOC4_VARIANT_PCI_RT;
 269 }
 270
 271 static void
 272 ioc4_load_modules(struct work_struct *work)
 273 {
 274         request_module("sgiioc4");
 275 }
 276
 277 static DECLARE_WORK(ioc4_load_modules_work, ioc4_load_modules);
 278
 279 /* Adds a new instance of an IOC4 card */
 280 static int
 281 ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 282 {
 283         struct ioc4_driver_data *idd;
 284         struct ioc4_submodule *is;
 285         uint32_t pcmd;
 286         int ret;
 287
 288         /* Enable IOC4 and take ownership of it */
 289         if ((ret = pci_enable_device(pdev))) {
 290                 printk(KERN_WARNING
 291                        "%s: Failed to enable IOC4 device for pci_dev %s.\n",
 292                        __func__, pci_name(pdev));
 293                 goto out;
 294         }
 295         pci_set_master(pdev);
 296
 297         /* Set up per-IOC4 data */
 298         idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL);
 299         if (!idd) {
 300                 printk(KERN_WARNING
 301                        "%s: Failed to allocate IOC4 data for pci_dev %s.\n",
 302                        __func__, pci_name(pdev));
 303                 ret = -ENODEV;
 304                 goto out_idd;
 305         }
 306         idd->idd_pdev = pdev;
 307         idd->idd_pci_id = pci_id;
 308
 309         /* Map IOC4 misc registers.  These are shared between subdevices
 310          * so the main IOC4 module manages them.
 311          */
 312         idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0);
 313         if (!idd->idd_bar0) {
 314                 printk(KERN_WARNING
 315                        "%s: Unable to find IOC4 misc resource "
 316                        "for pci_dev %s.\n",
 317                        __func__, pci_name(idd->idd_pdev));
 318                 ret = -ENODEV;
 319                 goto out_pci;
 320         }
 321         if (!request_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs),
 322                             "ioc4_misc")) {
 323                 printk(KERN_WARNING
 324                        "%s: Unable to request IOC4 misc region "
 325                        "for pci_dev %s.\n",
 326                        __func__, pci_name(idd->idd_pdev));
 327                 ret = -ENODEV;
 328                 goto out_pci;
 329         }
 330         idd->idd_misc_regs = ioremap(idd->idd_bar0,
 331                                      sizeof(struct ioc4_misc_regs));
 332         if (!idd->idd_misc_regs) {
 333                 printk(KERN_WARNING
 334                        "%s: Unable to remap IOC4 misc region "
 335                        "for pci_dev %s.\n",
 336                        __func__, pci_name(idd->idd_pdev));
 337                 ret = -ENODEV;
 338                 goto out_misc_region;
 339         }
 340
 341         /* Failsafe portion of per-IOC4 initialization */
 342
 343         /* Detect card variant */
 344         idd->idd_variant = ioc4_variant(idd);
 345         printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev),
 346                idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" :
 347                idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" :
 348                idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown");
 349
 350         /* Initialize IOC4 */
 351         pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd);
 352         pci_write_config_dword(idd->idd_pdev, PCI_COMMAND,
 353                                pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 354
 355         /* Determine PCI clock */
 356         ioc4_clock_calibrate(idd);
 357
 358         /* Disable/clear all interrupts.  Need to do this here lest
 359          * one submodule request the shared IOC4 IRQ, but interrupt
 360          * is generated by a different subdevice.
 361          */
 362         /* Disable */
 363         writel(~0, &idd->idd_misc_regs->other_iec.raw);
 364         writel(~0, &idd->idd_misc_regs->sio_iec);
 365         /* Clear (i.e. acknowledge) */
 366         writel(~0, &idd->idd_misc_regs->other_ir.raw);
 367         writel(~0, &idd->idd_misc_regs->sio_ir);
 368
 369         /* Track PCI-device specific data */
 370         idd->idd_serial_data = NULL;
 371         pci_set_drvdata(idd->idd_pdev, idd);
 372
 373         mutex_lock(&ioc4_mutex);
 374         list_add_tail(&idd->idd_list, &ioc4_devices);
 375
 376         /* Add this IOC4 to all submodules */
 377         list_for_each_entry(is, &ioc4_submodules, is_list) {
 378                 if (is->is_probe && is->is_probe(idd)) {
 379                         printk(KERN_WARNING
 380                                "%s: IOC4 submodule 0x%s probe failed "
 381                                "for pci_dev %s.\n",
 382                                __func__, module_name(is->is_owner),
 383                                pci_name(idd->idd_pdev));
 384                 }
 385         }
 386         mutex_unlock(&ioc4_mutex);
 387
 388         /* Request sgiioc4 IDE driver on boards that bring that functionality
 389          * off of IOC4.  The root filesystem may be hosted on a drive connected
 390          * to IOC4, so we need to make sure the sgiioc4 driver is loaded as it
 391          * won't be picked up by modprobes due to the ioc4 module owning the
 392          * PCI device.
 393          */
 394         if (idd->idd_variant != IOC4_VARIANT_PCI_RT) {
 395                 /* Request the module from a work procedure as the modprobe
 396                  * goes out to a userland helper and that will hang if done
 397                  * directly from ioc4_probe().
 398                  */
 399                 printk(KERN_INFO "IOC4 loading sgiioc4 submodule\n");
 400                 schedule_work(&ioc4_load_modules_work);
 401         }
 402
 403         return 0;
 404
 405 out_misc_region:
 406         release_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs));
 407 out_pci:
 408         kfree(idd);
 409 out_idd:
 410         pci_disable_device(pdev);
 411 out:
 412         return ret;
 413 }
 414
 415 /* Removes a particular instance of an IOC4 card. */
 416 static void
 417 ioc4_remove(struct pci_dev *pdev)
 418 {
 419         struct ioc4_submodule *is;
 420         struct ioc4_driver_data *idd;
 421
 422         idd = pci_get_drvdata(pdev);
 423
 424         /* Remove this IOC4 from all submodules */
 425         mutex_lock(&ioc4_mutex);
 426         list_for_each_entry(is, &ioc4_submodules, is_list) {
 427                 if (is->is_remove && is->is_remove(idd)) {
 428                         printk(KERN_WARNING
 429                                "%s: IOC4 submodule 0x%s remove failed "
 430                                "for pci_dev %s.\n",
 431                                __func__, module_name(is->is_owner),
 432                                pci_name(idd->idd_pdev));
 433                 }
 434         }
 435         mutex_unlock(&ioc4_mutex);
 436
 437         /* Release resources */
 438         iounmap(idd->idd_misc_regs);
 439         if (!idd->idd_bar0) {
 440                 printk(KERN_WARNING
 441                        "%s: Unable to get IOC4 misc mapping for pci_dev %s. "
 442                        "Device removal may be incomplete.\n",
 443                        __func__, pci_name(idd->idd_pdev));
 444         }
 445         release_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs));
 446
 447         /* Disable IOC4 and relinquish */
 448         pci_disable_device(pdev);
 449
 450         /* Remove and free driver data */
 451         mutex_lock(&ioc4_mutex);
 452         list_del(&idd->idd_list);
 453         mutex_unlock(&ioc4_mutex);
 454         kfree(idd);
 455 }
 456
 457 static const struct pci_device_id ioc4_id_table[] = {
 458         {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID,
 459          PCI_ANY_ID, 0x0b4000, 0xFFFFFF},
 460         {0}
 461 };
 462
 463 static struct pci_driver ioc4_driver = {
 464         .name = "IOC4",
 465         .id_table = ioc4_id_table,
 466         .probe = ioc4_probe,
 467         .remove = ioc4_remove,
 468 };
 469
 470 MODULE_DEVICE_TABLE(pci, ioc4_id_table);
 471
 472 /*********************
 473  * Module management *
 474  *********************/
 475
 476 /* Module load */
 477 static int __init
 478 ioc4_init(void)
 479 {
 480         return pci_register_driver(&ioc4_driver);
 481 }
 482
 483 /* Module unload */
 484 static void __exit
 485 ioc4_exit(void)
 486 {
 487         /* Ensure ioc4_load_modules() has completed before exiting */
 488         flush_work(&ioc4_load_modules_work);
 489         pci_unregister_driver(&ioc4_driver);
 490 }
 491
 492 module_init(ioc4_init);
 493 module_exit(ioc4_exit);
 494
 495 MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. <bcasavan@sgi.com>");
 496 MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card");
 497 MODULE_LICENSE("GPL");
 498
 499 EXPORT_SYMBOL(ioc4_register_submodule);
 500 EXPORT_SYMBOL(ioc4_unregister_submodule);