1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <linux/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static const struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and initialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w initialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (msecs_to_jiffies(50))
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 err
= ipw2100_power_cycle_adapter(priv
);
1762 printk(KERN_WARNING DRV_NAME
1763 ": %s: Could not cycle adapter.\n",
1764 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 err
= ipw2100_start_adapter(priv
);
1773 printk(KERN_ERR DRV_NAME
1774 ": %s: Failed to start the firmware.\n",
1775 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 err
= ipw2100_get_hw_features(priv
);
1784 printk(KERN_ERR DRV_NAME
1785 ": %s: Failed to determine HW features.\n",
1786 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 libipw_set_geo(priv
->ieee
, &ipw_geos
[0]);
1792 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1795 err
= ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
);
1797 printk(KERN_ERR DRV_NAME
1798 ": %s: Failed to clear ordinal lock.\n",
1799 priv
->net_dev
->name
);
1803 priv
->status
&= ~STATUS_SCANNING
;
1805 if (rf_kill_active(priv
)) {
1806 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1807 priv
->net_dev
->name
);
1809 if (priv
->stop_rf_kill
) {
1810 priv
->stop_rf_kill
= 0;
1811 schedule_delayed_work(&priv
->rf_kill
,
1812 round_jiffies_relative(HZ
));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv
);
1821 /* Send all of the commands that must be sent prior to
1823 err
= ipw2100_adapter_setup(priv
);
1825 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1826 priv
->net_dev
->name
);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 err
= ipw2100_enable_adapter(priv
);
1834 printk(KERN_ERR DRV_NAME
": "
1835 "%s: failed in call to enable adapter.\n",
1836 priv
->net_dev
->name
);
1837 ipw2100_hw_stop_adapter(priv
);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv
);
1843 ipw2100_start_scan(priv
);
1850 static void ipw2100_down(struct ipw2100_priv
*priv
)
1852 unsigned long flags
;
1853 union iwreq_data wrqu
= {
1855 .sa_family
= ARPHRD_ETHER
}
1857 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1859 /* Kill the RF switch timer */
1860 if (!priv
->stop_rf_kill
) {
1861 priv
->stop_rf_kill
= 1;
1862 cancel_delayed_work(&priv
->rf_kill
);
1865 /* Kill the firmware hang check timer */
1866 if (!priv
->stop_hang_check
) {
1867 priv
->stop_hang_check
= 1;
1868 cancel_delayed_work(&priv
->hang_check
);
1871 /* Kill any pending resets */
1872 if (priv
->status
& STATUS_RESET_PENDING
)
1873 cancel_delayed_work(&priv
->reset_work
);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv
->low_lock
, flags
);
1878 ipw2100_enable_interrupts(priv
);
1879 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1881 if (ipw2100_hw_stop_adapter(priv
))
1882 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1883 priv
->net_dev
->name
);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv
->low_lock
, flags
);
1889 ipw2100_disable_interrupts(priv
);
1890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1892 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1898 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1899 netif_carrier_off(priv
->net_dev
);
1900 netif_stop_queue(priv
->net_dev
);
1903 static int ipw2100_wdev_init(struct net_device
*dev
)
1905 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1906 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1907 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1910 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1912 /* fill-out priv->ieee->bg_band */
1913 if (geo
->bg_channels
) {
1914 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1916 bg_band
->band
= NL80211_BAND_2GHZ
;
1917 bg_band
->n_channels
= geo
->bg_channels
;
1918 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1919 sizeof(struct ieee80211_channel
),
1921 if (!bg_band
->channels
) {
1925 /* translate geo->bg to bg_band.channels */
1926 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1927 bg_band
->channels
[i
].band
= NL80211_BAND_2GHZ
;
1928 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1929 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1930 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1931 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1932 bg_band
->channels
[i
].flags
|=
1933 IEEE80211_CHAN_NO_IR
;
1934 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1935 bg_band
->channels
[i
].flags
|=
1936 IEEE80211_CHAN_NO_IR
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_RADAR
;
1940 /* No equivalent for LIBIPW_CH_80211H_RULES,
1941 LIBIPW_CH_UNIFORM_SPREADING, or
1942 LIBIPW_CH_B_ONLY... */
1944 /* point at bitrate info */
1945 bg_band
->bitrates
= ipw2100_bg_rates
;
1946 bg_band
->n_bitrates
= RATE_COUNT
;
1948 wdev
->wiphy
->bands
[NL80211_BAND_2GHZ
] = bg_band
;
1951 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1952 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1954 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1955 if (wiphy_register(wdev
->wiphy
))
1960 static void ipw2100_reset_adapter(struct work_struct
*work
)
1962 struct ipw2100_priv
*priv
=
1963 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1964 unsigned long flags
;
1965 union iwreq_data wrqu
= {
1967 .sa_family
= ARPHRD_ETHER
}
1969 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1971 spin_lock_irqsave(&priv
->low_lock
, flags
);
1972 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1974 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1975 priv
->status
|= STATUS_SECURITY_UPDATED
;
1977 /* Force a power cycle even if interface hasn't been opened
1979 cancel_delayed_work(&priv
->reset_work
);
1980 priv
->status
|= STATUS_RESET_PENDING
;
1981 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1983 mutex_lock(&priv
->action_mutex
);
1984 /* stop timed checks so that they don't interfere with reset */
1985 priv
->stop_hang_check
= 1;
1986 cancel_delayed_work(&priv
->hang_check
);
1988 /* We have to signal any supplicant if we are disassociating */
1990 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1992 ipw2100_up(priv
, 0);
1993 mutex_unlock(&priv
->action_mutex
);
1997 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2000 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2002 unsigned int len
, essid_len
;
2003 char essid
[IW_ESSID_MAX_SIZE
];
2010 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2011 * an actual MAC of the AP. Seems like FW sets this
2012 * address too late. Read it later and expose through
2013 * /proc or schedule a later task to query and update
2016 essid_len
= IW_ESSID_MAX_SIZE
;
2017 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2020 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2026 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2028 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2034 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2036 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2041 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, bssid
,
2044 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2048 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2051 case TX_RATE_1_MBIT
:
2052 txratename
= "1Mbps";
2054 case TX_RATE_2_MBIT
:
2055 txratename
= "2Mbsp";
2057 case TX_RATE_5_5_MBIT
:
2058 txratename
= "5.5Mbps";
2060 case TX_RATE_11_MBIT
:
2061 txratename
= "11Mbps";
2064 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2065 txratename
= "unknown rate";
2069 IPW_DEBUG_INFO("%s: Associated with '%*pE' at %s, channel %d (BSSID=%pM)\n",
2070 priv
->net_dev
->name
, essid_len
, essid
,
2071 txratename
, chan
, bssid
);
2073 /* now we copy read ssid into dev */
2074 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2075 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2076 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2078 priv
->channel
= chan
;
2079 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2081 priv
->status
|= STATUS_ASSOCIATING
;
2082 priv
->connect_start
= get_seconds();
2084 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2087 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2088 int length
, int batch_mode
)
2090 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2091 struct host_command cmd
= {
2092 .host_command
= SSID
,
2093 .host_command_sequence
= 0,
2094 .host_command_length
= ssid_len
2098 IPW_DEBUG_HC("SSID: '%*pE'\n", ssid_len
, essid
);
2101 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2104 err
= ipw2100_disable_adapter(priv
);
2109 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2110 * disable auto association -- so we cheat by setting a bogus SSID */
2111 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2113 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2114 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2115 bogus
[i
] = 0x18 + i
;
2116 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2119 /* NOTE: We always send the SSID command even if the provided ESSID is
2120 * the same as what we currently think is set. */
2122 err
= ipw2100_hw_send_command(priv
, &cmd
);
2124 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2125 memcpy(priv
->essid
, essid
, ssid_len
);
2126 priv
->essid_len
= ssid_len
;
2130 if (ipw2100_enable_adapter(priv
))
2137 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2139 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2140 "disassociated: '%*pE' %pM\n", priv
->essid_len
, priv
->essid
,
2143 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2145 if (priv
->status
& STATUS_STOPPING
) {
2146 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2150 eth_zero_addr(priv
->bssid
);
2151 eth_zero_addr(priv
->ieee
->bssid
);
2153 netif_carrier_off(priv
->net_dev
);
2154 netif_stop_queue(priv
->net_dev
);
2156 if (!(priv
->status
& STATUS_RUNNING
))
2159 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2160 schedule_delayed_work(&priv
->security_work
, 0);
2162 schedule_delayed_work(&priv
->wx_event_work
, 0);
2165 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2167 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2168 priv
->net_dev
->name
);
2170 /* RF_KILL is now enabled (else we wouldn't be here) */
2171 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2172 priv
->status
|= STATUS_RF_KILL_HW
;
2174 /* Make sure the RF Kill check timer is running */
2175 priv
->stop_rf_kill
= 0;
2176 mod_delayed_work(system_wq
, &priv
->rf_kill
, round_jiffies_relative(HZ
));
2179 static void ipw2100_scan_event(struct work_struct
*work
)
2181 struct ipw2100_priv
*priv
= container_of(work
, struct ipw2100_priv
,
2183 union iwreq_data wrqu
;
2185 wrqu
.data
.length
= 0;
2186 wrqu
.data
.flags
= 0;
2187 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2190 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2192 IPW_DEBUG_SCAN("scan complete\n");
2193 /* Age the scan results... */
2194 priv
->ieee
->scans
++;
2195 priv
->status
&= ~STATUS_SCANNING
;
2197 /* Only userspace-requested scan completion events go out immediately */
2198 if (!priv
->user_requested_scan
) {
2199 schedule_delayed_work(&priv
->scan_event
,
2200 round_jiffies_relative(msecs_to_jiffies(4000)));
2202 priv
->user_requested_scan
= 0;
2203 mod_delayed_work(system_wq
, &priv
->scan_event
, 0);
2207 #ifdef CONFIG_IPW2100_DEBUG
2208 #define IPW2100_HANDLER(v, f) { v, f, # v }
2209 struct ipw2100_status_indicator
{
2211 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2215 #define IPW2100_HANDLER(v, f) { v, f }
2216 struct ipw2100_status_indicator
{
2218 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2220 #endif /* CONFIG_IPW2100_DEBUG */
2222 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2224 IPW_DEBUG_SCAN("Scanning...\n");
2225 priv
->status
|= STATUS_SCANNING
;
2228 static const struct ipw2100_status_indicator status_handlers
[] = {
2229 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2230 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2231 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2232 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2233 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2234 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2235 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2236 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2237 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2238 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2239 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2240 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2241 IPW2100_HANDLER(-1, NULL
)
2244 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2248 if (status
== IPW_STATE_SCANNING
&&
2249 priv
->status
& STATUS_ASSOCIATED
&&
2250 !(priv
->status
& STATUS_SCANNING
)) {
2251 IPW_DEBUG_INFO("Scan detected while associated, with "
2252 "no scan request. Restarting firmware.\n");
2254 /* Wake up any sleeping jobs */
2255 schedule_reset(priv
);
2258 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2259 if (status
== status_handlers
[i
].status
) {
2260 IPW_DEBUG_NOTIF("Status change: %s\n",
2261 status_handlers
[i
].name
);
2262 if (status_handlers
[i
].cb
)
2263 status_handlers
[i
].cb(priv
, status
);
2264 priv
->wstats
.status
= status
;
2269 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2272 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2273 struct ipw2100_cmd_header
*cmd
)
2275 #ifdef CONFIG_IPW2100_DEBUG
2276 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2277 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2278 command_types
[cmd
->host_command_reg
],
2279 cmd
->host_command_reg
);
2282 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2283 priv
->status
|= STATUS_ENABLED
;
2285 if (cmd
->host_command_reg
== CARD_DISABLE
)
2286 priv
->status
&= ~STATUS_ENABLED
;
2288 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2290 wake_up_interruptible(&priv
->wait_command_queue
);
2293 #ifdef CONFIG_IPW2100_DEBUG
2294 static const char *frame_types
[] = {
2295 "COMMAND_STATUS_VAL",
2296 "STATUS_CHANGE_VAL",
2299 "HOST_NOTIFICATION_VAL"
2303 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2304 struct ipw2100_rx_packet
*packet
)
2306 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2310 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2311 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2312 sizeof(struct ipw2100_rx
),
2313 PCI_DMA_FROMDEVICE
);
2314 if (pci_dma_mapping_error(priv
->pci_dev
, packet
->dma_addr
)) {
2315 dev_kfree_skb(packet
->skb
);
2322 #define SEARCH_ERROR 0xffffffff
2323 #define SEARCH_FAIL 0xfffffffe
2324 #define SEARCH_SUCCESS 0xfffffff0
2325 #define SEARCH_DISCARD 0
2326 #define SEARCH_SNAPSHOT 1
2328 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2329 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2332 if (!priv
->snapshot
[0])
2334 for (i
= 0; i
< 0x30; i
++)
2335 kfree(priv
->snapshot
[i
]);
2336 priv
->snapshot
[0] = NULL
;
2339 #ifdef IPW2100_DEBUG_C3
2340 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2343 if (priv
->snapshot
[0])
2345 for (i
= 0; i
< 0x30; i
++) {
2346 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2347 if (!priv
->snapshot
[i
]) {
2348 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2349 "buffer %d\n", priv
->net_dev
->name
, i
);
2351 kfree(priv
->snapshot
[--i
]);
2352 priv
->snapshot
[0] = NULL
;
2360 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2361 size_t len
, int mode
)
2369 if (mode
== SEARCH_SNAPSHOT
) {
2370 if (!ipw2100_snapshot_alloc(priv
))
2371 mode
= SEARCH_DISCARD
;
2374 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2375 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2376 if (mode
== SEARCH_SNAPSHOT
)
2377 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2378 if (ret
== SEARCH_FAIL
) {
2380 for (j
= 0; j
< 4; j
++) {
2389 if ((s
- in_buf
) == len
)
2390 ret
= (i
+ j
) - len
+ 1;
2392 } else if (mode
== SEARCH_DISCARD
)
2402 * 0) Disconnect the SKB from the firmware (just unmap)
2403 * 1) Pack the ETH header into the SKB
2404 * 2) Pass the SKB to the network stack
2406 * When packet is provided by the firmware, it contains the following:
2411 * The size of the constructed ethernet
2414 #ifdef IPW2100_RX_DEBUG
2415 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2418 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2420 #ifdef IPW2100_DEBUG_C3
2421 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2426 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2427 i
* sizeof(struct ipw2100_status
));
2429 #ifdef IPW2100_DEBUG_C3
2430 /* Halt the firmware so we can get a good image */
2431 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2432 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2435 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2436 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2438 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2442 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2443 sizeof(struct ipw2100_status
),
2445 if (match
< SEARCH_SUCCESS
)
2446 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2447 "offset 0x%06X, length %d:\n",
2448 priv
->net_dev
->name
, match
,
2449 sizeof(struct ipw2100_status
));
2451 IPW_DEBUG_INFO("%s: No DMA status match in "
2452 "Firmware.\n", priv
->net_dev
->name
);
2454 printk_buf((u8
*) priv
->status_queue
.drv
,
2455 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2458 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2459 priv
->net_dev
->stats
.rx_errors
++;
2460 schedule_reset(priv
);
2463 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2464 struct libipw_rx_stats
*stats
)
2466 struct net_device
*dev
= priv
->net_dev
;
2467 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2468 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2470 IPW_DEBUG_RX("Handler...\n");
2472 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2473 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2476 status
->frame_size
, skb_tailroom(packet
->skb
));
2477 dev
->stats
.rx_errors
++;
2481 if (unlikely(!netif_running(dev
))) {
2482 dev
->stats
.rx_errors
++;
2483 priv
->wstats
.discard
.misc
++;
2484 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2488 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2489 !(priv
->status
& STATUS_ASSOCIATED
))) {
2490 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2491 priv
->wstats
.discard
.misc
++;
2495 pci_unmap_single(priv
->pci_dev
,
2497 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2499 skb_put(packet
->skb
, status
->frame_size
);
2501 #ifdef IPW2100_RX_DEBUG
2502 /* Make a copy of the frame so we can dump it to the logs if
2503 * libipw_rx fails */
2504 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2505 min_t(u32
, status
->frame_size
,
2506 IPW_RX_NIC_BUFFER_LENGTH
));
2509 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2510 #ifdef IPW2100_RX_DEBUG
2511 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2513 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2515 dev
->stats
.rx_errors
++;
2517 /* libipw_rx failed, so it didn't free the SKB */
2518 dev_kfree_skb_any(packet
->skb
);
2522 /* We need to allocate a new SKB and attach it to the RDB. */
2523 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2524 printk(KERN_WARNING DRV_NAME
": "
2525 "%s: Unable to allocate SKB onto RBD ring - disabling "
2526 "adapter.\n", dev
->name
);
2527 /* TODO: schedule adapter shutdown */
2528 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2531 /* Update the RDB entry */
2532 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2535 #ifdef CONFIG_IPW2100_MONITOR
2537 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2538 struct libipw_rx_stats
*stats
)
2540 struct net_device
*dev
= priv
->net_dev
;
2541 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2542 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2544 /* Magic struct that slots into the radiotap header -- no reason
2545 * to build this manually element by element, we can write it much
2546 * more efficiently than we can parse it. ORDER MATTERS HERE */
2548 struct ieee80211_radiotap_header rt_hdr
;
2549 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2552 IPW_DEBUG_RX("Handler...\n");
2554 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2555 sizeof(struct ipw_rt_hdr
))) {
2556 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2560 skb_tailroom(packet
->skb
));
2561 dev
->stats
.rx_errors
++;
2565 if (unlikely(!netif_running(dev
))) {
2566 dev
->stats
.rx_errors
++;
2567 priv
->wstats
.discard
.misc
++;
2568 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2572 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2573 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2574 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2575 dev
->stats
.rx_errors
++;
2579 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2580 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2581 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2582 packet
->skb
->data
, status
->frame_size
);
2584 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2586 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2587 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2588 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2590 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2592 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2594 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2596 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2597 dev
->stats
.rx_errors
++;
2599 /* libipw_rx failed, so it didn't free the SKB */
2600 dev_kfree_skb_any(packet
->skb
);
2604 /* We need to allocate a new SKB and attach it to the RDB. */
2605 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2607 "%s: Unable to allocate SKB onto RBD ring - disabling "
2608 "adapter.\n", dev
->name
);
2609 /* TODO: schedule adapter shutdown */
2610 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2613 /* Update the RDB entry */
2614 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2619 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2621 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2622 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2623 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2625 switch (frame_type
) {
2626 case COMMAND_STATUS_VAL
:
2627 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2628 case STATUS_CHANGE_VAL
:
2629 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2630 case HOST_NOTIFICATION_VAL
:
2631 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2632 case P80211_DATA_VAL
:
2633 case P8023_DATA_VAL
:
2634 #ifdef CONFIG_IPW2100_MONITOR
2637 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2638 case IEEE80211_FTYPE_MGMT
:
2639 case IEEE80211_FTYPE_CTL
:
2641 case IEEE80211_FTYPE_DATA
:
2642 return (status
->frame_size
>
2643 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2652 * ipw2100 interrupts are disabled at this point, and the ISR
2653 * is the only code that calls this method. So, we do not need
2654 * to play with any locks.
2656 * RX Queue works as follows:
2658 * Read index - firmware places packet in entry identified by the
2659 * Read index and advances Read index. In this manner,
2660 * Read index will always point to the next packet to
2661 * be filled--but not yet valid.
2663 * Write index - driver fills this entry with an unused RBD entry.
2664 * This entry has not filled by the firmware yet.
2666 * In between the W and R indexes are the RBDs that have been received
2667 * but not yet processed.
2669 * The process of handling packets will start at WRITE + 1 and advance
2670 * until it reaches the READ index.
2672 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2675 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2677 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2678 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2679 struct ipw2100_rx_packet
*packet
;
2682 struct ipw2100_rx
*u
;
2683 struct libipw_rx_stats stats
= {
2684 .mac_time
= jiffies
,
2687 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2688 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2690 if (r
>= rxq
->entries
) {
2691 IPW_DEBUG_RX("exit - bad read index\n");
2695 i
= (rxq
->next
+ 1) % rxq
->entries
;
2698 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2699 r, rxq->next, i); */
2701 packet
= &priv
->rx_buffers
[i
];
2703 /* Sync the DMA for the RX buffer so CPU is sure to get
2704 * the correct values */
2705 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2706 sizeof(struct ipw2100_rx
),
2707 PCI_DMA_FROMDEVICE
);
2709 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2710 ipw2100_corruption_detected(priv
, i
);
2715 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2716 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2717 stats
.len
= sq
->drv
[i
].frame_size
;
2720 if (stats
.rssi
!= 0)
2721 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2722 stats
.freq
= LIBIPW_24GHZ_BAND
;
2724 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2725 priv
->net_dev
->name
, frame_types
[frame_type
],
2728 switch (frame_type
) {
2729 case COMMAND_STATUS_VAL
:
2730 /* Reset Rx watchdog */
2731 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2734 case STATUS_CHANGE_VAL
:
2735 isr_status_change(priv
, u
->rx_data
.status
);
2738 case P80211_DATA_VAL
:
2739 case P8023_DATA_VAL
:
2740 #ifdef CONFIG_IPW2100_MONITOR
2741 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2742 isr_rx_monitor(priv
, i
, &stats
);
2746 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2748 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2749 case IEEE80211_FTYPE_MGMT
:
2750 libipw_rx_mgt(priv
->ieee
,
2751 &u
->rx_data
.header
, &stats
);
2754 case IEEE80211_FTYPE_CTL
:
2757 case IEEE80211_FTYPE_DATA
:
2758 isr_rx(priv
, i
, &stats
);
2766 /* clear status field associated with this RBD */
2767 rxq
->drv
[i
].status
.info
.field
= 0;
2769 i
= (i
+ 1) % rxq
->entries
;
2773 /* backtrack one entry, wrapping to end if at 0 */
2774 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2776 write_register(priv
->net_dev
,
2777 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2782 * __ipw2100_tx_process
2784 * This routine will determine whether the next packet on
2785 * the fw_pend_list has been processed by the firmware yet.
2787 * If not, then it does nothing and returns.
2789 * If so, then it removes the item from the fw_pend_list, frees
2790 * any associated storage, and places the item back on the
2791 * free list of its source (either msg_free_list or tx_free_list)
2793 * TX Queue works as follows:
2795 * Read index - points to the next TBD that the firmware will
2796 * process. The firmware will read the data, and once
2797 * done processing, it will advance the Read index.
2799 * Write index - driver fills this entry with an constructed TBD
2800 * entry. The Write index is not advanced until the
2801 * packet has been configured.
2803 * In between the W and R indexes are the TBDs that have NOT been
2804 * processed. Lagging behind the R index are packets that have
2805 * been processed but have not been freed by the driver.
2807 * In order to free old storage, an internal index will be maintained
2808 * that points to the next packet to be freed. When all used
2809 * packets have been freed, the oldest index will be the same as the
2810 * firmware's read index.
2812 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2814 * Because the TBD structure can not contain arbitrary data, the
2815 * driver must keep an internal queue of cached allocations such that
2816 * it can put that data back into the tx_free_list and msg_free_list
2817 * for use by future command and data packets.
2820 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2822 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2823 struct ipw2100_bd
*tbd
;
2824 struct list_head
*element
;
2825 struct ipw2100_tx_packet
*packet
;
2826 int descriptors_used
;
2828 u32 r
, w
, frag_num
= 0;
2830 if (list_empty(&priv
->fw_pend_list
))
2833 element
= priv
->fw_pend_list
.next
;
2835 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2836 tbd
= &txq
->drv
[packet
->index
];
2838 /* Determine how many TBD entries must be finished... */
2839 switch (packet
->type
) {
2841 /* COMMAND uses only one slot; don't advance */
2842 descriptors_used
= 1;
2847 /* DATA uses two slots; advance and loop position. */
2848 descriptors_used
= tbd
->num_fragments
;
2849 frag_num
= tbd
->num_fragments
- 1;
2850 e
= txq
->oldest
+ frag_num
;
2855 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2856 priv
->net_dev
->name
);
2860 /* if the last TBD is not done by NIC yet, then packet is
2861 * not ready to be released.
2864 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2866 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2869 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2870 priv
->net_dev
->name
);
2873 * txq->next is the index of the last packet written txq->oldest is
2874 * the index of the r is the index of the next packet to be read by
2879 * Quick graphic to help you visualize the following
2880 * if / else statement
2882 * ===>| s---->|===============
2884 * | a | b | c | d | e | f | g | h | i | j | k | l
2888 * w - updated by driver
2889 * r - updated by firmware
2890 * s - start of oldest BD entry (txq->oldest)
2891 * e - end of oldest BD entry
2894 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2895 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2900 DEC_STAT(&priv
->fw_pend_stat
);
2902 #ifdef CONFIG_IPW2100_DEBUG
2905 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2907 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2908 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2910 if (packet
->type
== DATA
) {
2911 i
= (i
+ 1) % txq
->entries
;
2913 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2915 (u32
) (txq
->nic
+ i
*
2916 sizeof(struct ipw2100_bd
)),
2917 (u32
) txq
->drv
[i
].host_addr
,
2918 txq
->drv
[i
].buf_length
);
2923 switch (packet
->type
) {
2925 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2926 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2927 "Expecting DATA TBD but pulled "
2928 "something else: ids %d=%d.\n",
2929 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2931 /* DATA packet; we have to unmap and free the SKB */
2932 for (i
= 0; i
< frag_num
; i
++) {
2933 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2935 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2936 (packet
->index
+ 1 + i
) % txq
->entries
,
2937 tbd
->host_addr
, tbd
->buf_length
);
2939 pci_unmap_single(priv
->pci_dev
,
2941 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2944 libipw_txb_free(packet
->info
.d_struct
.txb
);
2945 packet
->info
.d_struct
.txb
= NULL
;
2947 list_add_tail(element
, &priv
->tx_free_list
);
2948 INC_STAT(&priv
->tx_free_stat
);
2950 /* We have a free slot in the Tx queue, so wake up the
2951 * transmit layer if it is stopped. */
2952 if (priv
->status
& STATUS_ASSOCIATED
)
2953 netif_wake_queue(priv
->net_dev
);
2955 /* A packet was processed by the hardware, so update the
2957 netif_trans_update(priv
->net_dev
);
2962 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2963 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2964 "Expecting COMMAND TBD but pulled "
2965 "something else: ids %d=%d.\n",
2966 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2968 #ifdef CONFIG_IPW2100_DEBUG
2969 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2970 ARRAY_SIZE(command_types
))
2971 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2972 command_types
[packet
->info
.c_struct
.cmd
->
2974 packet
->info
.c_struct
.cmd
->
2976 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
2979 list_add_tail(element
, &priv
->msg_free_list
);
2980 INC_STAT(&priv
->msg_free_stat
);
2984 /* advance oldest used TBD pointer to start of next entry */
2985 txq
->oldest
= (e
+ 1) % txq
->entries
;
2986 /* increase available TBDs number */
2987 txq
->available
+= descriptors_used
;
2988 SET_STAT(&priv
->txq_stat
, txq
->available
);
2990 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2991 jiffies
- packet
->jiffy_start
);
2993 return (!list_empty(&priv
->fw_pend_list
));
2996 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3000 while (__ipw2100_tx_process(priv
) && i
< 200)
3004 printk(KERN_WARNING DRV_NAME
": "
3005 "%s: Driver is running slow (%d iters).\n",
3006 priv
->net_dev
->name
, i
);
3010 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3012 struct list_head
*element
;
3013 struct ipw2100_tx_packet
*packet
;
3014 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3015 struct ipw2100_bd
*tbd
;
3016 int next
= txq
->next
;
3018 while (!list_empty(&priv
->msg_pend_list
)) {
3019 /* if there isn't enough space in TBD queue, then
3020 * don't stuff a new one in.
3021 * NOTE: 3 are needed as a command will take one,
3022 * and there is a minimum of 2 that must be
3023 * maintained between the r and w indexes
3025 if (txq
->available
<= 3) {
3026 IPW_DEBUG_TX("no room in tx_queue\n");
3030 element
= priv
->msg_pend_list
.next
;
3032 DEC_STAT(&priv
->msg_pend_stat
);
3034 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3036 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3037 &txq
->drv
[txq
->next
],
3038 (u32
) (txq
->nic
+ txq
->next
*
3039 sizeof(struct ipw2100_bd
)));
3041 packet
->index
= txq
->next
;
3043 tbd
= &txq
->drv
[txq
->next
];
3045 /* initialize TBD */
3046 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3047 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3048 /* not marking number of fragments causes problems
3049 * with f/w debug version */
3050 tbd
->num_fragments
= 1;
3051 tbd
->status
.info
.field
=
3052 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3053 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3055 /* update TBD queue counters */
3057 txq
->next
%= txq
->entries
;
3059 DEC_STAT(&priv
->txq_stat
);
3061 list_add_tail(element
, &priv
->fw_pend_list
);
3062 INC_STAT(&priv
->fw_pend_stat
);
3065 if (txq
->next
!= next
) {
3066 /* kick off the DMA by notifying firmware the
3067 * write index has moved; make sure TBD stores are sync'd */
3069 write_register(priv
->net_dev
,
3070 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3076 * ipw2100_tx_send_data
3079 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3081 struct list_head
*element
;
3082 struct ipw2100_tx_packet
*packet
;
3083 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3084 struct ipw2100_bd
*tbd
;
3085 int next
= txq
->next
;
3087 struct ipw2100_data_header
*ipw_hdr
;
3088 struct libipw_hdr_3addr
*hdr
;
3090 while (!list_empty(&priv
->tx_pend_list
)) {
3091 /* if there isn't enough space in TBD queue, then
3092 * don't stuff a new one in.
3093 * NOTE: 4 are needed as a data will take two,
3094 * and there is a minimum of 2 that must be
3095 * maintained between the r and w indexes
3097 element
= priv
->tx_pend_list
.next
;
3098 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3100 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3102 /* TODO: Support merging buffers if more than
3103 * IPW_MAX_BDS are used */
3104 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3105 "Increase fragmentation level.\n",
3106 priv
->net_dev
->name
);
3109 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3110 IPW_DEBUG_TX("no room in tx_queue\n");
3115 DEC_STAT(&priv
->tx_pend_stat
);
3117 tbd
= &txq
->drv
[txq
->next
];
3119 packet
->index
= txq
->next
;
3121 ipw_hdr
= packet
->info
.d_struct
.data
;
3122 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3125 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3126 /* To DS: Addr1 = BSSID, Addr2 = SA,
3128 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3129 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3130 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3131 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3133 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3134 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3137 ipw_hdr
->host_command_reg
= SEND
;
3138 ipw_hdr
->host_command_reg1
= 0;
3140 /* For now we only support host based encryption */
3141 ipw_hdr
->needs_encryption
= 0;
3142 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3143 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3144 ipw_hdr
->fragment_size
=
3145 packet
->info
.d_struct
.txb
->frag_size
-
3148 ipw_hdr
->fragment_size
= 0;
3150 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3151 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3152 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3153 tbd
->status
.info
.field
=
3154 IPW_BD_STATUS_TX_FRAME_802_3
|
3155 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3157 txq
->next
%= txq
->entries
;
3159 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3160 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3161 #ifdef CONFIG_IPW2100_DEBUG
3162 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3163 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3164 packet
->info
.d_struct
.txb
->nr_frags
);
3167 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3168 tbd
= &txq
->drv
[txq
->next
];
3169 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3170 tbd
->status
.info
.field
=
3171 IPW_BD_STATUS_TX_FRAME_802_3
|
3172 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3174 tbd
->status
.info
.field
=
3175 IPW_BD_STATUS_TX_FRAME_802_3
|
3176 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3178 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3179 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3181 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3182 packet
->info
.d_struct
.
3188 if (pci_dma_mapping_error(priv
->pci_dev
,
3190 IPW_DEBUG_TX("dma mapping error\n");
3194 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3195 txq
->next
, tbd
->host_addr
,
3198 pci_dma_sync_single_for_device(priv
->pci_dev
,
3204 txq
->next
%= txq
->entries
;
3207 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3208 SET_STAT(&priv
->txq_stat
, txq
->available
);
3210 list_add_tail(element
, &priv
->fw_pend_list
);
3211 INC_STAT(&priv
->fw_pend_stat
);
3214 if (txq
->next
!= next
) {
3215 /* kick off the DMA by notifying firmware the
3216 * write index has moved; make sure TBD stores are sync'd */
3217 write_register(priv
->net_dev
,
3218 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3223 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3225 struct net_device
*dev
= priv
->net_dev
;
3226 unsigned long flags
;
3229 spin_lock_irqsave(&priv
->low_lock
, flags
);
3230 ipw2100_disable_interrupts(priv
);
3232 read_register(dev
, IPW_REG_INTA
, &inta
);
3234 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3235 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3240 /* We do not loop and keep polling for more interrupts as this
3241 * is frowned upon and doesn't play nicely with other potentially
3243 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3244 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3246 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3247 printk(KERN_WARNING DRV_NAME
3248 ": Fatal interrupt. Scheduling firmware restart.\n");
3250 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3252 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3253 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3254 priv
->net_dev
->name
, priv
->fatal_error
);
3256 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3257 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3258 priv
->net_dev
->name
, tmp
);
3260 /* Wake up any sleeping jobs */
3261 schedule_reset(priv
);
3264 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3265 printk(KERN_ERR DRV_NAME
3266 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3268 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3271 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3272 IPW_DEBUG_ISR("RX interrupt\n");
3274 priv
->rx_interrupts
++;
3276 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3278 __ipw2100_rx_process(priv
);
3279 __ipw2100_tx_complete(priv
);
3282 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3283 IPW_DEBUG_ISR("TX interrupt\n");
3285 priv
->tx_interrupts
++;
3287 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3289 __ipw2100_tx_complete(priv
);
3290 ipw2100_tx_send_commands(priv
);
3291 ipw2100_tx_send_data(priv
);
3294 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3295 IPW_DEBUG_ISR("TX complete\n");
3297 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3299 __ipw2100_tx_complete(priv
);
3302 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3303 /* ipw2100_handle_event(dev); */
3305 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3308 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3309 IPW_DEBUG_ISR("FW init done interrupt\n");
3312 read_register(dev
, IPW_REG_INTA
, &tmp
);
3313 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3314 IPW2100_INTA_PARITY_ERROR
)) {
3315 write_register(dev
, IPW_REG_INTA
,
3316 IPW2100_INTA_FATAL_ERROR
|
3317 IPW2100_INTA_PARITY_ERROR
);
3320 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3323 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3324 IPW_DEBUG_ISR("Status change interrupt\n");
3326 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3329 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3330 IPW_DEBUG_ISR("slave host mode interrupt\n");
3332 write_register(dev
, IPW_REG_INTA
,
3333 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3337 ipw2100_enable_interrupts(priv
);
3339 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3341 IPW_DEBUG_ISR("exit\n");
3344 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3346 struct ipw2100_priv
*priv
= data
;
3347 u32 inta
, inta_mask
;
3352 spin_lock(&priv
->low_lock
);
3354 /* We check to see if we should be ignoring interrupts before
3355 * we touch the hardware. During ucode load if we try and handle
3356 * an interrupt we can cause keyboard problems as well as cause
3357 * the ucode to fail to initialize */
3358 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3363 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3364 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3366 if (inta
== 0xFFFFFFFF) {
3367 /* Hardware disappeared */
3368 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3372 inta
&= IPW_INTERRUPT_MASK
;
3374 if (!(inta
& inta_mask
)) {
3375 /* Shared interrupt */
3379 /* We disable the hardware interrupt here just to prevent unneeded
3380 * calls to be made. We disable this again within the actual
3381 * work tasklet, so if another part of the code re-enables the
3382 * interrupt, that is fine */
3383 ipw2100_disable_interrupts(priv
);
3385 tasklet_schedule(&priv
->irq_tasklet
);
3386 spin_unlock(&priv
->low_lock
);
3390 spin_unlock(&priv
->low_lock
);
3394 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3395 struct net_device
*dev
, int pri
)
3397 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3398 struct list_head
*element
;
3399 struct ipw2100_tx_packet
*packet
;
3400 unsigned long flags
;
3402 spin_lock_irqsave(&priv
->low_lock
, flags
);
3404 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3405 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3406 priv
->net_dev
->stats
.tx_carrier_errors
++;
3407 netif_stop_queue(dev
);
3411 if (list_empty(&priv
->tx_free_list
))
3414 element
= priv
->tx_free_list
.next
;
3415 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3417 packet
->info
.d_struct
.txb
= txb
;
3419 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3420 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3422 packet
->jiffy_start
= jiffies
;
3425 DEC_STAT(&priv
->tx_free_stat
);
3427 list_add_tail(element
, &priv
->tx_pend_list
);
3428 INC_STAT(&priv
->tx_pend_stat
);
3430 ipw2100_tx_send_data(priv
);
3432 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3433 return NETDEV_TX_OK
;
3436 netif_stop_queue(dev
);
3437 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3438 return NETDEV_TX_BUSY
;
3441 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3443 int i
, j
, err
= -EINVAL
;
3448 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3450 if (!priv
->msg_buffers
)
3453 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3454 v
= pci_zalloc_consistent(priv
->pci_dev
,
3455 sizeof(struct ipw2100_cmd_header
),
3458 printk(KERN_ERR DRV_NAME
": "
3459 "%s: PCI alloc failed for msg "
3460 "buffers.\n", priv
->net_dev
->name
);
3465 priv
->msg_buffers
[i
].type
= COMMAND
;
3466 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3467 (struct ipw2100_cmd_header
*)v
;
3468 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3471 if (i
== IPW_COMMAND_POOL_SIZE
)
3474 for (j
= 0; j
< i
; j
++) {
3475 pci_free_consistent(priv
->pci_dev
,
3476 sizeof(struct ipw2100_cmd_header
),
3477 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3478 priv
->msg_buffers
[j
].info
.c_struct
.
3482 kfree(priv
->msg_buffers
);
3483 priv
->msg_buffers
= NULL
;
3488 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3492 INIT_LIST_HEAD(&priv
->msg_free_list
);
3493 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3495 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3496 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3497 SET_STAT(&priv
->msg_free_stat
, i
);
3502 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3506 if (!priv
->msg_buffers
)
3509 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3510 pci_free_consistent(priv
->pci_dev
,
3511 sizeof(struct ipw2100_cmd_header
),
3512 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3513 priv
->msg_buffers
[i
].info
.c_struct
.
3517 kfree(priv
->msg_buffers
);
3518 priv
->msg_buffers
= NULL
;
3521 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3524 struct pci_dev
*pci_dev
= to_pci_dev(d
);
3529 for (i
= 0; i
< 16; i
++) {
3530 out
+= sprintf(out
, "[%08X] ", i
* 16);
3531 for (j
= 0; j
< 16; j
+= 4) {
3532 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3533 out
+= sprintf(out
, "%08X ", val
);
3535 out
+= sprintf(out
, "\n");
3541 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3543 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3546 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3547 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3550 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3552 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3555 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3556 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3559 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3561 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3564 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3565 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3568 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3570 #define IPW2100_REG(x) { IPW_ ##x, #x }
3571 static const struct {
3575 IPW2100_REG(REG_GP_CNTRL
),
3576 IPW2100_REG(REG_GPIO
),
3577 IPW2100_REG(REG_INTA
),
3578 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3579 #define IPW2100_NIC(x, s) { x, #x, s }
3580 static const struct {
3585 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3586 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3587 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3588 static const struct {
3593 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3594 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3595 "successful Host Tx's (MSDU)"),
3596 IPW2100_ORD(STAT_TX_DIR_DATA
,
3597 "successful Directed Tx's (MSDU)"),
3598 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3599 "successful Directed Tx's (MSDU) @ 1MB"),
3600 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3601 "successful Directed Tx's (MSDU) @ 2MB"),
3602 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3603 "successful Directed Tx's (MSDU) @ 5_5MB"),
3604 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3605 "successful Directed Tx's (MSDU) @ 11MB"),
3606 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3607 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3608 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3609 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3610 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3611 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3612 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3613 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3614 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3615 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3616 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3617 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3618 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3619 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3620 "successful Association response Tx's"),
3621 IPW2100_ORD(STAT_TX_REASSN
,
3622 "successful Reassociation Tx's"),
3623 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3624 "successful Reassociation response Tx's"),
3625 IPW2100_ORD(STAT_TX_PROBE
,
3626 "probes successfully transmitted"),
3627 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3628 "probe responses successfully transmitted"),
3629 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3630 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3631 IPW2100_ORD(STAT_TX_DISASSN
,
3632 "successful Disassociation TX"),
3633 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3634 IPW2100_ORD(STAT_TX_DEAUTH
,
3635 "successful Deauthentication TX"),
3636 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3637 "Total successful Tx data bytes"),
3638 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3639 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3640 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3641 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3642 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3643 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3644 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3645 "times max tries in a hop failed"),
3646 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3647 "times disassociation failed"),
3648 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3649 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3650 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3651 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3652 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3653 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3654 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3655 "directed packets at 5.5MB"),
3656 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3657 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3658 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3659 "nondirected packets at 1MB"),
3660 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3661 "nondirected packets at 2MB"),
3662 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3663 "nondirected packets at 5.5MB"),
3664 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3665 "nondirected packets at 11MB"),
3666 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3667 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3669 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3670 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3671 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3672 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3673 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3674 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3675 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3676 "Reassociation response Rx's"),
3677 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3678 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3679 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3680 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3681 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3682 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3683 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3684 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3685 "Total rx data bytes received"),
3686 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3687 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3688 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3689 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3690 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3691 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3692 "duplicate rx packets at 1MB"),
3693 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3694 "duplicate rx packets at 2MB"),
3695 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3696 "duplicate rx packets at 5.5MB"),
3697 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3698 "duplicate rx packets at 11MB"),
3699 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3700 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3701 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3702 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3703 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3704 "rx frames with invalid protocol"),
3705 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3706 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3707 "rx frames rejected due to no buffer"),
3708 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3709 "rx frames dropped due to missing fragment"),
3710 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3711 "rx frames dropped due to non-sequential fragment"),
3712 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3713 "rx frames dropped due to unmatched 1st frame"),
3714 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3715 "rx frames dropped due to uncompleted frame"),
3716 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3717 "ICV errors during decryption"),
3718 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3719 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3720 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3721 "poll response timeouts"),
3722 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3723 "timeouts waiting for last {broad,multi}cast pkt"),
3724 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3725 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3726 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3727 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3728 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3729 "current calculation of % missed beacons"),
3730 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3731 "current calculation of % missed tx retries"),
3732 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3733 "0 if not associated, else pointer to AP table entry"),
3734 IPW2100_ORD(AVAILABLE_AP_CNT
,
3735 "AP's decsribed in the AP table"),
3736 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3737 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3738 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3739 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3740 "failures due to response fail"),
3741 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3742 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3743 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3744 "times roaming was inhibited due to activity"),
3745 IPW2100_ORD(RSSI_AT_ASSN
,
3746 "RSSI of associated AP at time of association"),
3747 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3748 "reassociation: no probe response or TX on hop"),
3749 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3750 "reassociation: poor tx/rx quality"),
3751 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3752 "reassociation: tx/rx quality (excessive AP load"),
3753 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3754 "reassociation: AP RSSI level"),
3755 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3756 "reassociations due to load leveling"),
3757 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3758 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3759 "times authentication response failed"),
3760 IPW2100_ORD(STATION_TABLE_CNT
,
3761 "entries in association table"),
3762 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3763 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3764 IPW2100_ORD(COUNTRY_CODE
,
3765 "IEEE country code as recv'd from beacon"),
3766 IPW2100_ORD(COUNTRY_CHANNELS
,
3767 "channels supported by country"),
3768 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3769 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3770 IPW2100_ORD(ANTENNA_DIVERSITY
,
3771 "TRUE if antenna diversity is disabled"),
3772 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3773 IPW2100_ORD(OUR_FREQ
,
3774 "current radio freq lower digits - channel ID"),
3775 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3776 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3777 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3778 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3779 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3780 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3781 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3782 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3783 IPW2100_ORD(CAPABILITIES
,
3784 "Management frame capability field"),
3785 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3786 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3787 IPW2100_ORD(RTS_THRESHOLD
,
3788 "Min packet length for RTS handshaking"),
3789 IPW2100_ORD(INT_MODE
, "International mode"),
3790 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3791 "protocol frag threshold"),
3792 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3793 "EEPROM offset in SRAM"),
3794 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3795 "EEPROM size in SRAM"),
3796 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3797 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3798 "EEPROM IBSS 11b channel set"),
3799 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3800 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3801 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3802 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3803 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3805 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3809 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3810 struct net_device
*dev
= priv
->net_dev
;
3814 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3816 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3817 read_register(dev
, hw_data
[i
].addr
, &val
);
3818 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3819 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3825 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3827 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3830 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3831 struct net_device
*dev
= priv
->net_dev
;
3835 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3837 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3842 switch (nic_data
[i
].size
) {
3844 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3845 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3846 nic_data
[i
].name
, nic_data
[i
].addr
,
3850 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3851 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3852 nic_data
[i
].name
, nic_data
[i
].addr
,
3856 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3857 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3858 nic_data
[i
].name
, nic_data
[i
].addr
,
3866 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3868 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3871 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3872 struct net_device
*dev
= priv
->net_dev
;
3873 static unsigned long loop
= 0;
3879 if (loop
>= 0x30000)
3882 /* sysfs provides us PAGE_SIZE buffer */
3883 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3885 if (priv
->snapshot
[0])
3886 for (i
= 0; i
< 4; i
++)
3888 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3890 for (i
= 0; i
< 4; i
++)
3891 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3894 len
+= sprintf(buf
+ len
,
3899 ((u8
*) buffer
)[0x0],
3900 ((u8
*) buffer
)[0x1],
3901 ((u8
*) buffer
)[0x2],
3902 ((u8
*) buffer
)[0x3],
3903 ((u8
*) buffer
)[0x4],
3904 ((u8
*) buffer
)[0x5],
3905 ((u8
*) buffer
)[0x6],
3906 ((u8
*) buffer
)[0x7],
3907 ((u8
*) buffer
)[0x8],
3908 ((u8
*) buffer
)[0x9],
3909 ((u8
*) buffer
)[0xa],
3910 ((u8
*) buffer
)[0xb],
3911 ((u8
*) buffer
)[0xc],
3912 ((u8
*) buffer
)[0xd],
3913 ((u8
*) buffer
)[0xe],
3914 ((u8
*) buffer
)[0xf]);
3916 len
+= sprintf(buf
+ len
, "%s\n",
3917 snprint_line(line
, sizeof(line
),
3918 (u8
*) buffer
, 16, loop
));
3925 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3926 const char *buf
, size_t count
)
3928 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3929 struct net_device
*dev
= priv
->net_dev
;
3930 const char *p
= buf
;
3932 (void)dev
; /* kill unused-var warning for debug-only code */
3938 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3939 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3943 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3944 tolower(p
[1]) == 'f')) {
3945 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3949 } else if (tolower(p
[0]) == 'r') {
3950 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3951 ipw2100_snapshot_free(priv
);
3954 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3955 "reset = clear memory snapshot\n", dev
->name
);
3960 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3962 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3965 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3969 static int loop
= 0;
3971 if (priv
->status
& STATUS_RF_KILL_MASK
)
3974 if (loop
>= ARRAY_SIZE(ord_data
))
3977 /* sysfs provides us PAGE_SIZE buffer */
3978 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
3979 val_len
= sizeof(u32
);
3981 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
3983 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
3984 ord_data
[loop
].index
,
3985 ord_data
[loop
].desc
);
3987 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
3988 ord_data
[loop
].index
, val
,
3989 ord_data
[loop
].desc
);
3996 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
3998 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4001 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4004 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4005 priv
->interrupts
, priv
->tx_interrupts
,
4006 priv
->rx_interrupts
, priv
->inta_other
);
4007 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4008 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4009 #ifdef CONFIG_IPW2100_DEBUG
4010 out
+= sprintf(out
, "packet mismatch image: %s\n",
4011 priv
->snapshot
[0] ? "YES" : "NO");
4017 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4019 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4023 if (mode
== priv
->ieee
->iw_mode
)
4026 err
= ipw2100_disable_adapter(priv
);
4028 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4029 priv
->net_dev
->name
, err
);
4035 priv
->net_dev
->type
= ARPHRD_ETHER
;
4038 priv
->net_dev
->type
= ARPHRD_ETHER
;
4040 #ifdef CONFIG_IPW2100_MONITOR
4041 case IW_MODE_MONITOR
:
4042 priv
->last_mode
= priv
->ieee
->iw_mode
;
4043 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4045 #endif /* CONFIG_IPW2100_MONITOR */
4048 priv
->ieee
->iw_mode
= mode
;
4051 /* Indicate ipw2100_download_firmware download firmware
4052 * from disk instead of memory. */
4053 ipw2100_firmware
.version
= 0;
4056 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4057 priv
->reset_backoff
= 0;
4058 schedule_reset(priv
);
4063 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4066 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4069 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4071 if (priv
->status
& STATUS_ASSOCIATED
)
4072 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4073 get_seconds() - priv
->connect_start
);
4075 len
+= sprintf(buf
+ len
, "not connected\n");
4077 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4078 DUMP_VAR(status
, "08lx");
4079 DUMP_VAR(config
, "08lx");
4080 DUMP_VAR(capability
, "08lx");
4083 sprintf(buf
+ len
, "last_rtc: %lu\n",
4084 (unsigned long)priv
->last_rtc
);
4086 DUMP_VAR(fatal_error
, "d");
4087 DUMP_VAR(stop_hang_check
, "d");
4088 DUMP_VAR(stop_rf_kill
, "d");
4089 DUMP_VAR(messages_sent
, "d");
4091 DUMP_VAR(tx_pend_stat
.value
, "d");
4092 DUMP_VAR(tx_pend_stat
.hi
, "d");
4094 DUMP_VAR(tx_free_stat
.value
, "d");
4095 DUMP_VAR(tx_free_stat
.lo
, "d");
4097 DUMP_VAR(msg_free_stat
.value
, "d");
4098 DUMP_VAR(msg_free_stat
.lo
, "d");
4100 DUMP_VAR(msg_pend_stat
.value
, "d");
4101 DUMP_VAR(msg_pend_stat
.hi
, "d");
4103 DUMP_VAR(fw_pend_stat
.value
, "d");
4104 DUMP_VAR(fw_pend_stat
.hi
, "d");
4106 DUMP_VAR(txq_stat
.value
, "d");
4107 DUMP_VAR(txq_stat
.lo
, "d");
4109 DUMP_VAR(ieee
->scans
, "d");
4110 DUMP_VAR(reset_backoff
, "d");
4115 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4117 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4120 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4121 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4125 unsigned int length
;
4128 if (priv
->status
& STATUS_RF_KILL_MASK
)
4131 memset(essid
, 0, sizeof(essid
));
4132 memset(bssid
, 0, sizeof(bssid
));
4134 length
= IW_ESSID_MAX_SIZE
;
4135 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4137 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4140 length
= sizeof(bssid
);
4141 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4144 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4147 length
= sizeof(u32
);
4148 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4150 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4153 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4154 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4155 out
+= sprintf(out
, "Channel: %d\n", chan
);
4160 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4162 #ifdef CONFIG_IPW2100_DEBUG
4163 static ssize_t
debug_level_show(struct device_driver
*d
, char *buf
)
4165 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4168 static ssize_t
debug_level_store(struct device_driver
*d
,
4169 const char *buf
, size_t count
)
4174 ret
= kstrtou32(buf
, 0, &val
);
4176 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4178 ipw2100_debug_level
= val
;
4180 return strnlen(buf
, count
);
4182 static DRIVER_ATTR_RW(debug_level
);
4183 #endif /* CONFIG_IPW2100_DEBUG */
4185 static ssize_t
show_fatal_error(struct device
*d
,
4186 struct device_attribute
*attr
, char *buf
)
4188 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4192 if (priv
->fatal_error
)
4193 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4195 out
+= sprintf(out
, "0\n");
4197 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4198 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4199 IPW2100_ERROR_QUEUE
])
4202 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4203 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4204 IPW2100_ERROR_QUEUE
]);
4210 static ssize_t
store_fatal_error(struct device
*d
,
4211 struct device_attribute
*attr
, const char *buf
,
4214 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4215 schedule_reset(priv
);
4219 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4222 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4225 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4226 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4229 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4230 const char *buf
, size_t count
)
4232 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4233 struct net_device
*dev
= priv
->net_dev
;
4237 (void)dev
; /* kill unused-var warning for debug-only code */
4239 IPW_DEBUG_INFO("enter\n");
4241 ret
= kstrtoul(buf
, 0, &val
);
4243 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4245 priv
->ieee
->scan_age
= val
;
4246 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4249 IPW_DEBUG_INFO("exit\n");
4250 return strnlen(buf
, count
);
4253 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4255 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4258 /* 0 - RF kill not enabled
4259 1 - SW based RF kill active (sysfs)
4260 2 - HW based RF kill active
4261 3 - Both HW and SW baed RF kill active */
4262 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4263 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4264 (rf_kill_active(priv
) ? 0x2 : 0x0);
4265 return sprintf(buf
, "%i\n", val
);
4268 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4270 if ((disable_radio
? 1 : 0) ==
4271 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4274 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4275 disable_radio
? "OFF" : "ON");
4277 mutex_lock(&priv
->action_mutex
);
4279 if (disable_radio
) {
4280 priv
->status
|= STATUS_RF_KILL_SW
;
4283 priv
->status
&= ~STATUS_RF_KILL_SW
;
4284 if (rf_kill_active(priv
)) {
4285 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4286 "disabled by HW switch\n");
4287 /* Make sure the RF_KILL check timer is running */
4288 priv
->stop_rf_kill
= 0;
4289 mod_delayed_work(system_wq
, &priv
->rf_kill
,
4290 round_jiffies_relative(HZ
));
4292 schedule_reset(priv
);
4295 mutex_unlock(&priv
->action_mutex
);
4299 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4300 const char *buf
, size_t count
)
4302 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4303 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4307 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4309 static struct attribute
*ipw2100_sysfs_entries
[] = {
4310 &dev_attr_hardware
.attr
,
4311 &dev_attr_registers
.attr
,
4312 &dev_attr_ordinals
.attr
,
4314 &dev_attr_stats
.attr
,
4315 &dev_attr_internals
.attr
,
4316 &dev_attr_bssinfo
.attr
,
4317 &dev_attr_memory
.attr
,
4318 &dev_attr_scan_age
.attr
,
4319 &dev_attr_fatal_error
.attr
,
4320 &dev_attr_rf_kill
.attr
,
4322 &dev_attr_status
.attr
,
4323 &dev_attr_capability
.attr
,
4327 static const struct attribute_group ipw2100_attribute_group
= {
4328 .attrs
= ipw2100_sysfs_entries
,
4331 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4333 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4335 IPW_DEBUG_INFO("enter\n");
4337 q
->size
= entries
* sizeof(struct ipw2100_status
);
4338 q
->drv
= pci_zalloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4340 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4344 IPW_DEBUG_INFO("exit\n");
4349 static void status_queue_free(struct ipw2100_priv
*priv
)
4351 IPW_DEBUG_INFO("enter\n");
4353 if (priv
->status_queue
.drv
) {
4354 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4355 priv
->status_queue
.drv
,
4356 priv
->status_queue
.nic
);
4357 priv
->status_queue
.drv
= NULL
;
4360 IPW_DEBUG_INFO("exit\n");
4363 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4364 struct ipw2100_bd_queue
*q
, int entries
)
4366 IPW_DEBUG_INFO("enter\n");
4368 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4370 q
->entries
= entries
;
4371 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4372 q
->drv
= pci_zalloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4375 ("can't allocate shared memory for buffer descriptors\n");
4379 IPW_DEBUG_INFO("exit\n");
4384 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4386 IPW_DEBUG_INFO("enter\n");
4392 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4396 IPW_DEBUG_INFO("exit\n");
4399 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4400 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4403 IPW_DEBUG_INFO("enter\n");
4405 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4408 write_register(priv
->net_dev
, base
, q
->nic
);
4409 write_register(priv
->net_dev
, size
, q
->entries
);
4410 write_register(priv
->net_dev
, r
, q
->oldest
);
4411 write_register(priv
->net_dev
, w
, q
->next
);
4413 IPW_DEBUG_INFO("exit\n");
4416 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4418 priv
->stop_rf_kill
= 1;
4419 priv
->stop_hang_check
= 1;
4420 cancel_delayed_work_sync(&priv
->reset_work
);
4421 cancel_delayed_work_sync(&priv
->security_work
);
4422 cancel_delayed_work_sync(&priv
->wx_event_work
);
4423 cancel_delayed_work_sync(&priv
->hang_check
);
4424 cancel_delayed_work_sync(&priv
->rf_kill
);
4425 cancel_delayed_work_sync(&priv
->scan_event
);
4428 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4430 int i
, j
, err
= -EINVAL
;
4434 IPW_DEBUG_INFO("enter\n");
4436 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4438 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4439 priv
->net_dev
->name
);
4443 priv
->tx_buffers
= kmalloc_array(TX_PENDED_QUEUE_LENGTH
,
4444 sizeof(struct ipw2100_tx_packet
),
4446 if (!priv
->tx_buffers
) {
4447 bd_queue_free(priv
, &priv
->tx_queue
);
4451 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4452 v
= pci_alloc_consistent(priv
->pci_dev
,
4453 sizeof(struct ipw2100_data_header
),
4456 printk(KERN_ERR DRV_NAME
4457 ": %s: PCI alloc failed for tx " "buffers.\n",
4458 priv
->net_dev
->name
);
4463 priv
->tx_buffers
[i
].type
= DATA
;
4464 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4465 (struct ipw2100_data_header
*)v
;
4466 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4467 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4470 if (i
== TX_PENDED_QUEUE_LENGTH
)
4473 for (j
= 0; j
< i
; j
++) {
4474 pci_free_consistent(priv
->pci_dev
,
4475 sizeof(struct ipw2100_data_header
),
4476 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4477 priv
->tx_buffers
[j
].info
.d_struct
.
4481 kfree(priv
->tx_buffers
);
4482 priv
->tx_buffers
= NULL
;
4487 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4491 IPW_DEBUG_INFO("enter\n");
4494 * reinitialize packet info lists
4496 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4497 INIT_STAT(&priv
->fw_pend_stat
);
4500 * reinitialize lists
4502 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4503 INIT_LIST_HEAD(&priv
->tx_free_list
);
4504 INIT_STAT(&priv
->tx_pend_stat
);
4505 INIT_STAT(&priv
->tx_free_stat
);
4507 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4508 /* We simply drop any SKBs that have been queued for
4510 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4511 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4513 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4516 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4519 SET_STAT(&priv
->tx_free_stat
, i
);
4521 priv
->tx_queue
.oldest
= 0;
4522 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4523 priv
->tx_queue
.next
= 0;
4524 INIT_STAT(&priv
->txq_stat
);
4525 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4527 bd_queue_initialize(priv
, &priv
->tx_queue
,
4528 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4529 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4530 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4531 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4533 IPW_DEBUG_INFO("exit\n");
4537 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4541 IPW_DEBUG_INFO("enter\n");
4543 bd_queue_free(priv
, &priv
->tx_queue
);
4545 if (!priv
->tx_buffers
)
4548 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4549 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4550 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4552 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4554 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4555 pci_free_consistent(priv
->pci_dev
,
4556 sizeof(struct ipw2100_data_header
),
4557 priv
->tx_buffers
[i
].info
.d_struct
.
4559 priv
->tx_buffers
[i
].info
.d_struct
.
4563 kfree(priv
->tx_buffers
);
4564 priv
->tx_buffers
= NULL
;
4566 IPW_DEBUG_INFO("exit\n");
4569 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4571 int i
, j
, err
= -EINVAL
;
4573 IPW_DEBUG_INFO("enter\n");
4575 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4577 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4581 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4583 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4584 bd_queue_free(priv
, &priv
->rx_queue
);
4591 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4592 sizeof(struct ipw2100_rx_packet
),
4594 if (!priv
->rx_buffers
) {
4595 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4597 bd_queue_free(priv
, &priv
->rx_queue
);
4599 status_queue_free(priv
);
4604 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4605 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4607 err
= ipw2100_alloc_skb(priv
, packet
);
4608 if (unlikely(err
)) {
4613 /* The BD holds the cache aligned address */
4614 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4615 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4616 priv
->status_queue
.drv
[i
].status_fields
= 0;
4619 if (i
== RX_QUEUE_LENGTH
)
4622 for (j
= 0; j
< i
; j
++) {
4623 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4624 sizeof(struct ipw2100_rx_packet
),
4625 PCI_DMA_FROMDEVICE
);
4626 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4629 kfree(priv
->rx_buffers
);
4630 priv
->rx_buffers
= NULL
;
4632 bd_queue_free(priv
, &priv
->rx_queue
);
4634 status_queue_free(priv
);
4639 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4641 IPW_DEBUG_INFO("enter\n");
4643 priv
->rx_queue
.oldest
= 0;
4644 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4645 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4647 INIT_STAT(&priv
->rxq_stat
);
4648 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4650 bd_queue_initialize(priv
, &priv
->rx_queue
,
4651 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4652 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4653 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4654 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4656 /* set up the status queue */
4657 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4658 priv
->status_queue
.nic
);
4660 IPW_DEBUG_INFO("exit\n");
4663 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4667 IPW_DEBUG_INFO("enter\n");
4669 bd_queue_free(priv
, &priv
->rx_queue
);
4670 status_queue_free(priv
);
4672 if (!priv
->rx_buffers
)
4675 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4676 if (priv
->rx_buffers
[i
].rxp
) {
4677 pci_unmap_single(priv
->pci_dev
,
4678 priv
->rx_buffers
[i
].dma_addr
,
4679 sizeof(struct ipw2100_rx
),
4680 PCI_DMA_FROMDEVICE
);
4681 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4685 kfree(priv
->rx_buffers
);
4686 priv
->rx_buffers
= NULL
;
4688 IPW_DEBUG_INFO("exit\n");
4691 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4693 u32 length
= ETH_ALEN
;
4698 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4700 IPW_DEBUG_INFO("MAC address read failed\n");
4704 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4705 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4710 /********************************************************************
4714 ********************************************************************/
4716 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4718 struct host_command cmd
= {
4719 .host_command
= ADAPTER_ADDRESS
,
4720 .host_command_sequence
= 0,
4721 .host_command_length
= ETH_ALEN
4725 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4727 IPW_DEBUG_INFO("enter\n");
4729 if (priv
->config
& CFG_CUSTOM_MAC
) {
4730 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4731 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4733 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4736 err
= ipw2100_hw_send_command(priv
, &cmd
);
4738 IPW_DEBUG_INFO("exit\n");
4742 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4745 struct host_command cmd
= {
4746 .host_command
= PORT_TYPE
,
4747 .host_command_sequence
= 0,
4748 .host_command_length
= sizeof(u32
)
4752 switch (port_type
) {
4754 cmd
.host_command_parameters
[0] = IPW_BSS
;
4757 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4761 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4762 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4765 err
= ipw2100_disable_adapter(priv
);
4767 printk(KERN_ERR DRV_NAME
4768 ": %s: Could not disable adapter %d\n",
4769 priv
->net_dev
->name
, err
);
4774 /* send cmd to firmware */
4775 err
= ipw2100_hw_send_command(priv
, &cmd
);
4778 ipw2100_enable_adapter(priv
);
4783 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4786 struct host_command cmd
= {
4787 .host_command
= CHANNEL
,
4788 .host_command_sequence
= 0,
4789 .host_command_length
= sizeof(u32
)
4793 cmd
.host_command_parameters
[0] = channel
;
4795 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4797 /* If BSS then we don't support channel selection */
4798 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4801 if ((channel
!= 0) &&
4802 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4806 err
= ipw2100_disable_adapter(priv
);
4811 err
= ipw2100_hw_send_command(priv
, &cmd
);
4813 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4818 priv
->config
|= CFG_STATIC_CHANNEL
;
4820 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4822 priv
->channel
= channel
;
4825 err
= ipw2100_enable_adapter(priv
);
4833 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4835 struct host_command cmd
= {
4836 .host_command
= SYSTEM_CONFIG
,
4837 .host_command_sequence
= 0,
4838 .host_command_length
= 12,
4840 u32 ibss_mask
, len
= sizeof(u32
);
4843 /* Set system configuration */
4846 err
= ipw2100_disable_adapter(priv
);
4851 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4852 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4854 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4855 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4857 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4858 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4860 err
= ipw2100_get_ordinal(priv
,
4861 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4864 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4866 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4867 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4870 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4872 err
= ipw2100_hw_send_command(priv
, &cmd
);
4876 /* If IPv6 is configured in the kernel then we don't want to filter out all
4877 * of the multicast packets as IPv6 needs some. */
4878 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4879 cmd
.host_command
= ADD_MULTICAST
;
4880 cmd
.host_command_sequence
= 0;
4881 cmd
.host_command_length
= 0;
4883 ipw2100_hw_send_command(priv
, &cmd
);
4886 err
= ipw2100_enable_adapter(priv
);
4894 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4897 struct host_command cmd
= {
4898 .host_command
= BASIC_TX_RATES
,
4899 .host_command_sequence
= 0,
4900 .host_command_length
= 4
4904 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4907 err
= ipw2100_disable_adapter(priv
);
4912 /* Set BASIC TX Rate first */
4913 ipw2100_hw_send_command(priv
, &cmd
);
4916 cmd
.host_command
= TX_RATES
;
4917 ipw2100_hw_send_command(priv
, &cmd
);
4919 /* Set MSDU TX Rate */
4920 cmd
.host_command
= MSDU_TX_RATES
;
4921 ipw2100_hw_send_command(priv
, &cmd
);
4924 err
= ipw2100_enable_adapter(priv
);
4929 priv
->tx_rates
= rate
;
4934 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4936 struct host_command cmd
= {
4937 .host_command
= POWER_MODE
,
4938 .host_command_sequence
= 0,
4939 .host_command_length
= 4
4943 cmd
.host_command_parameters
[0] = power_level
;
4945 err
= ipw2100_hw_send_command(priv
, &cmd
);
4949 if (power_level
== IPW_POWER_MODE_CAM
)
4950 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
4952 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
4954 #ifdef IPW2100_TX_POWER
4955 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
4956 /* Set beacon interval */
4957 cmd
.host_command
= TX_POWER_INDEX
;
4958 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
4960 err
= ipw2100_hw_send_command(priv
, &cmd
);
4969 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
4971 struct host_command cmd
= {
4972 .host_command
= RTS_THRESHOLD
,
4973 .host_command_sequence
= 0,
4974 .host_command_length
= 4
4978 if (threshold
& RTS_DISABLED
)
4979 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
4981 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
4983 err
= ipw2100_hw_send_command(priv
, &cmd
);
4987 priv
->rts_threshold
= threshold
;
4993 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
4994 u32 threshold
, int batch_mode
)
4996 struct host_command cmd
= {
4997 .host_command
= FRAG_THRESHOLD
,
4998 .host_command_sequence
= 0,
4999 .host_command_length
= 4,
5000 .host_command_parameters
[0] = 0,
5005 err
= ipw2100_disable_adapter(priv
);
5011 threshold
= DEFAULT_FRAG_THRESHOLD
;
5013 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5014 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5017 cmd
.host_command_parameters
[0] = threshold
;
5019 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5021 err
= ipw2100_hw_send_command(priv
, &cmd
);
5024 ipw2100_enable_adapter(priv
);
5027 priv
->frag_threshold
= threshold
;
5033 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5035 struct host_command cmd
= {
5036 .host_command
= SHORT_RETRY_LIMIT
,
5037 .host_command_sequence
= 0,
5038 .host_command_length
= 4
5042 cmd
.host_command_parameters
[0] = retry
;
5044 err
= ipw2100_hw_send_command(priv
, &cmd
);
5048 priv
->short_retry_limit
= retry
;
5053 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5055 struct host_command cmd
= {
5056 .host_command
= LONG_RETRY_LIMIT
,
5057 .host_command_sequence
= 0,
5058 .host_command_length
= 4
5062 cmd
.host_command_parameters
[0] = retry
;
5064 err
= ipw2100_hw_send_command(priv
, &cmd
);
5068 priv
->long_retry_limit
= retry
;
5073 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5076 struct host_command cmd
= {
5077 .host_command
= MANDATORY_BSSID
,
5078 .host_command_sequence
= 0,
5079 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5083 #ifdef CONFIG_IPW2100_DEBUG
5085 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5087 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5089 /* if BSSID is empty then we disable mandatory bssid mode */
5091 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5094 err
= ipw2100_disable_adapter(priv
);
5099 err
= ipw2100_hw_send_command(priv
, &cmd
);
5102 ipw2100_enable_adapter(priv
);
5107 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5109 struct host_command cmd
= {
5110 .host_command
= DISASSOCIATION_BSSID
,
5111 .host_command_sequence
= 0,
5112 .host_command_length
= ETH_ALEN
5117 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5120 /* The Firmware currently ignores the BSSID and just disassociates from
5121 * the currently associated AP -- but in the off chance that a future
5122 * firmware does use the BSSID provided here, we go ahead and try and
5123 * set it to the currently associated AP's BSSID */
5124 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5126 err
= ipw2100_hw_send_command(priv
, &cmd
);
5131 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5132 struct ipw2100_wpa_assoc_frame
*, int)
5133 __attribute__ ((unused
));
5135 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5136 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5139 struct host_command cmd
= {
5140 .host_command
= SET_WPA_IE
,
5141 .host_command_sequence
= 0,
5142 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5146 IPW_DEBUG_HC("SET_WPA_IE\n");
5149 err
= ipw2100_disable_adapter(priv
);
5154 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5155 sizeof(struct ipw2100_wpa_assoc_frame
));
5157 err
= ipw2100_hw_send_command(priv
, &cmd
);
5160 if (ipw2100_enable_adapter(priv
))
5167 struct security_info_params
{
5168 u32 allowed_ciphers
;
5171 u8 replay_counters_number
;
5172 u8 unicast_using_group
;
5175 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5178 int unicast_using_group
,
5181 struct host_command cmd
= {
5182 .host_command
= SET_SECURITY_INFORMATION
,
5183 .host_command_sequence
= 0,
5184 .host_command_length
= sizeof(struct security_info_params
)
5186 struct security_info_params
*security
=
5187 (struct security_info_params
*)&cmd
.host_command_parameters
;
5189 memset(security
, 0, sizeof(*security
));
5191 /* If shared key AP authentication is turned on, then we need to
5192 * configure the firmware to try and use it.
5194 * Actual data encryption/decryption is handled by the host. */
5195 security
->auth_mode
= auth_mode
;
5196 security
->unicast_using_group
= unicast_using_group
;
5198 switch (security_level
) {
5201 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5204 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5208 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5209 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5211 case SEC_LEVEL_2_CKIP
:
5212 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5213 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5216 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5217 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5222 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5223 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5225 security
->replay_counters_number
= 0;
5228 err
= ipw2100_disable_adapter(priv
);
5233 err
= ipw2100_hw_send_command(priv
, &cmd
);
5236 ipw2100_enable_adapter(priv
);
5241 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5243 struct host_command cmd
= {
5244 .host_command
= TX_POWER_INDEX
,
5245 .host_command_sequence
= 0,
5246 .host_command_length
= 4
5251 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5252 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5253 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5255 cmd
.host_command_parameters
[0] = tmp
;
5257 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5258 err
= ipw2100_hw_send_command(priv
, &cmd
);
5260 priv
->tx_power
= tx_power
;
5265 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5266 u32 interval
, int batch_mode
)
5268 struct host_command cmd
= {
5269 .host_command
= BEACON_INTERVAL
,
5270 .host_command_sequence
= 0,
5271 .host_command_length
= 4
5275 cmd
.host_command_parameters
[0] = interval
;
5277 IPW_DEBUG_INFO("enter\n");
5279 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5281 err
= ipw2100_disable_adapter(priv
);
5286 ipw2100_hw_send_command(priv
, &cmd
);
5289 err
= ipw2100_enable_adapter(priv
);
5295 IPW_DEBUG_INFO("exit\n");
5300 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5302 ipw2100_tx_initialize(priv
);
5303 ipw2100_rx_initialize(priv
);
5304 ipw2100_msg_initialize(priv
);
5307 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5309 ipw2100_tx_free(priv
);
5310 ipw2100_rx_free(priv
);
5311 ipw2100_msg_free(priv
);
5314 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5316 if (ipw2100_tx_allocate(priv
) ||
5317 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5323 ipw2100_tx_free(priv
);
5324 ipw2100_rx_free(priv
);
5325 ipw2100_msg_free(priv
);
5329 #define IPW_PRIVACY_CAPABLE 0x0008
5331 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5334 struct host_command cmd
= {
5335 .host_command
= WEP_FLAGS
,
5336 .host_command_sequence
= 0,
5337 .host_command_length
= 4
5341 cmd
.host_command_parameters
[0] = flags
;
5343 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5346 err
= ipw2100_disable_adapter(priv
);
5348 printk(KERN_ERR DRV_NAME
5349 ": %s: Could not disable adapter %d\n",
5350 priv
->net_dev
->name
, err
);
5355 /* send cmd to firmware */
5356 err
= ipw2100_hw_send_command(priv
, &cmd
);
5359 ipw2100_enable_adapter(priv
);
5364 struct ipw2100_wep_key
{
5370 /* Macros to ease up priting WEP keys */
5371 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5372 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5373 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5374 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5379 * @priv: struct to work on
5380 * @idx: index of the key we want to set
5381 * @key: ptr to the key data to set
5382 * @len: length of the buffer at @key
5383 * @batch_mode: FIXME perform the operation in batch mode, not
5384 * disabling the device.
5386 * @returns 0 if OK, < 0 errno code on error.
5388 * Fill out a command structure with the new wep key, length an
5389 * index and send it down the wire.
5391 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5392 int idx
, char *key
, int len
, int batch_mode
)
5394 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5395 struct host_command cmd
= {
5396 .host_command
= WEP_KEY_INFO
,
5397 .host_command_sequence
= 0,
5398 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5400 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5403 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5406 /* NOTE: We don't check cached values in case the firmware was reset
5407 * or some other problem is occurring. If the user is setting the key,
5408 * then we push the change */
5411 wep_key
->len
= keylen
;
5414 memcpy(wep_key
->key
, key
, len
);
5415 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5418 /* Will be optimized out on debug not being configured in */
5420 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5421 priv
->net_dev
->name
, wep_key
->idx
);
5422 else if (keylen
== 5)
5423 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5424 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5425 WEP_STR_64(wep_key
->key
));
5427 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5429 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5430 WEP_STR_128(wep_key
->key
));
5433 err
= ipw2100_disable_adapter(priv
);
5434 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5436 printk(KERN_ERR DRV_NAME
5437 ": %s: Could not disable adapter %d\n",
5438 priv
->net_dev
->name
, err
);
5443 /* send cmd to firmware */
5444 err
= ipw2100_hw_send_command(priv
, &cmd
);
5447 int err2
= ipw2100_enable_adapter(priv
);
5454 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5455 int idx
, int batch_mode
)
5457 struct host_command cmd
= {
5458 .host_command
= WEP_KEY_INDEX
,
5459 .host_command_sequence
= 0,
5460 .host_command_length
= 4,
5461 .host_command_parameters
= {idx
},
5465 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5467 if (idx
< 0 || idx
> 3)
5471 err
= ipw2100_disable_adapter(priv
);
5473 printk(KERN_ERR DRV_NAME
5474 ": %s: Could not disable adapter %d\n",
5475 priv
->net_dev
->name
, err
);
5480 /* send cmd to firmware */
5481 err
= ipw2100_hw_send_command(priv
, &cmd
);
5484 ipw2100_enable_adapter(priv
);
5489 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5491 int i
, err
, auth_mode
, sec_level
, use_group
;
5493 if (!(priv
->status
& STATUS_RUNNING
))
5497 err
= ipw2100_disable_adapter(priv
);
5502 if (!priv
->ieee
->sec
.enabled
) {
5504 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5507 auth_mode
= IPW_AUTH_OPEN
;
5508 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5509 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5510 auth_mode
= IPW_AUTH_SHARED
;
5511 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5512 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5515 sec_level
= SEC_LEVEL_0
;
5516 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5517 sec_level
= priv
->ieee
->sec
.level
;
5520 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5521 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5524 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5531 if (priv
->ieee
->sec
.enabled
) {
5532 for (i
= 0; i
< 4; i
++) {
5533 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5534 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5535 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5537 err
= ipw2100_set_key(priv
, i
,
5538 priv
->ieee
->sec
.keys
[i
],
5546 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5549 /* Always enable privacy so the Host can filter WEP packets if
5550 * encrypted data is sent up */
5552 ipw2100_set_wep_flags(priv
,
5554 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5558 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5562 ipw2100_enable_adapter(priv
);
5567 static void ipw2100_security_work(struct work_struct
*work
)
5569 struct ipw2100_priv
*priv
=
5570 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5572 /* If we happen to have reconnected before we get a chance to
5573 * process this, then update the security settings--which causes
5574 * a disassociation to occur */
5575 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5576 priv
->status
& STATUS_SECURITY_UPDATED
)
5577 ipw2100_configure_security(priv
, 0);
5580 static void shim__set_security(struct net_device
*dev
,
5581 struct libipw_security
*sec
)
5583 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5584 int i
, force_update
= 0;
5586 mutex_lock(&priv
->action_mutex
);
5587 if (!(priv
->status
& STATUS_INITIALIZED
))
5590 for (i
= 0; i
< 4; i
++) {
5591 if (sec
->flags
& (1 << i
)) {
5592 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5593 if (sec
->key_sizes
[i
] == 0)
5594 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5596 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5598 if (sec
->level
== SEC_LEVEL_1
) {
5599 priv
->ieee
->sec
.flags
|= (1 << i
);
5600 priv
->status
|= STATUS_SECURITY_UPDATED
;
5602 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5606 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5607 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5608 if (sec
->active_key
<= 3) {
5609 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5610 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5612 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5614 priv
->status
|= STATUS_SECURITY_UPDATED
;
5617 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5618 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5619 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5620 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5621 priv
->status
|= STATUS_SECURITY_UPDATED
;
5624 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5625 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5626 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5627 priv
->status
|= STATUS_SECURITY_UPDATED
;
5631 if (sec
->flags
& SEC_ENCRYPT
)
5632 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5634 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5635 priv
->ieee
->sec
.level
= sec
->level
;
5636 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5637 priv
->status
|= STATUS_SECURITY_UPDATED
;
5640 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5641 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5642 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5643 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5644 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5645 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5646 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5647 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5648 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5649 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5651 /* As a temporary work around to enable WPA until we figure out why
5652 * wpa_supplicant toggles the security capability of the driver, which
5653 * forces a disassociation with force_update...
5655 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5656 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5657 ipw2100_configure_security(priv
, 0);
5659 mutex_unlock(&priv
->action_mutex
);
5662 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5668 IPW_DEBUG_INFO("enter\n");
5670 err
= ipw2100_disable_adapter(priv
);
5673 #ifdef CONFIG_IPW2100_MONITOR
5674 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5675 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5679 IPW_DEBUG_INFO("exit\n");
5683 #endif /* CONFIG_IPW2100_MONITOR */
5685 err
= ipw2100_read_mac_address(priv
);
5689 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5693 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5697 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5698 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5703 err
= ipw2100_system_config(priv
, batch_mode
);
5707 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5711 /* Default to power mode OFF */
5712 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5716 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5720 if (priv
->config
& CFG_STATIC_BSSID
)
5721 bssid
= priv
->bssid
;
5724 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5728 if (priv
->config
& CFG_STATIC_ESSID
)
5729 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5732 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5736 err
= ipw2100_configure_security(priv
, batch_mode
);
5740 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5742 ipw2100_set_ibss_beacon_interval(priv
,
5743 priv
->beacon_interval
,
5748 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5754 err = ipw2100_set_fragmentation_threshold(
5755 priv, priv->frag_threshold, batch_mode);
5760 IPW_DEBUG_INFO("exit\n");
5765 /*************************************************************************
5767 * EXTERNALLY CALLED METHODS
5769 *************************************************************************/
5771 /* This method is called by the network layer -- not to be confused with
5772 * ipw2100_set_mac_address() declared above called by this driver (and this
5773 * method as well) to talk to the firmware */
5774 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5776 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5777 struct sockaddr
*addr
= p
;
5780 if (!is_valid_ether_addr(addr
->sa_data
))
5781 return -EADDRNOTAVAIL
;
5783 mutex_lock(&priv
->action_mutex
);
5785 priv
->config
|= CFG_CUSTOM_MAC
;
5786 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5788 err
= ipw2100_set_mac_address(priv
, 0);
5792 priv
->reset_backoff
= 0;
5793 mutex_unlock(&priv
->action_mutex
);
5794 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5798 mutex_unlock(&priv
->action_mutex
);
5802 static int ipw2100_open(struct net_device
*dev
)
5804 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5805 unsigned long flags
;
5806 IPW_DEBUG_INFO("dev->open\n");
5808 spin_lock_irqsave(&priv
->low_lock
, flags
);
5809 if (priv
->status
& STATUS_ASSOCIATED
) {
5810 netif_carrier_on(dev
);
5811 netif_start_queue(dev
);
5813 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5818 static int ipw2100_close(struct net_device
*dev
)
5820 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5821 unsigned long flags
;
5822 struct list_head
*element
;
5823 struct ipw2100_tx_packet
*packet
;
5825 IPW_DEBUG_INFO("enter\n");
5827 spin_lock_irqsave(&priv
->low_lock
, flags
);
5829 if (priv
->status
& STATUS_ASSOCIATED
)
5830 netif_carrier_off(dev
);
5831 netif_stop_queue(dev
);
5833 /* Flush the TX queue ... */
5834 while (!list_empty(&priv
->tx_pend_list
)) {
5835 element
= priv
->tx_pend_list
.next
;
5836 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5839 DEC_STAT(&priv
->tx_pend_stat
);
5841 libipw_txb_free(packet
->info
.d_struct
.txb
);
5842 packet
->info
.d_struct
.txb
= NULL
;
5844 list_add_tail(element
, &priv
->tx_free_list
);
5845 INC_STAT(&priv
->tx_free_stat
);
5847 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5849 IPW_DEBUG_INFO("exit\n");
5855 * TODO: Fix this function... its just wrong
5857 static void ipw2100_tx_timeout(struct net_device
*dev
)
5859 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5861 dev
->stats
.tx_errors
++;
5863 #ifdef CONFIG_IPW2100_MONITOR
5864 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5868 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5870 schedule_reset(priv
);
5873 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5875 /* This is called when wpa_supplicant loads and closes the driver
5877 priv
->ieee
->wpa_enabled
= value
;
5881 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5884 struct libipw_device
*ieee
= priv
->ieee
;
5885 struct libipw_security sec
= {
5886 .flags
= SEC_AUTH_MODE
,
5890 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5891 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5893 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5894 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5896 } else if (value
& IW_AUTH_ALG_LEAP
) {
5897 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5902 if (ieee
->set_security
)
5903 ieee
->set_security(ieee
->dev
, &sec
);
5910 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5911 char *wpa_ie
, int wpa_ie_len
)
5914 struct ipw2100_wpa_assoc_frame frame
;
5916 frame
.fixed_ie_mask
= 0;
5919 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5920 frame
.var_ie_len
= wpa_ie_len
;
5922 /* make sure WPA is enabled */
5923 ipw2100_wpa_enable(priv
, 1);
5924 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5927 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5928 struct ethtool_drvinfo
*info
)
5930 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5931 char fw_ver
[64], ucode_ver
[64];
5933 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5934 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5936 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5937 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5939 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5940 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5942 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5943 sizeof(info
->bus_info
));
5946 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5948 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5949 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
5952 static const struct ethtool_ops ipw2100_ethtool_ops
= {
5953 .get_link
= ipw2100_ethtool_get_link
,
5954 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
5957 static void ipw2100_hang_check(struct work_struct
*work
)
5959 struct ipw2100_priv
*priv
=
5960 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
5961 unsigned long flags
;
5962 u32 rtc
= 0xa5a5a5a5;
5963 u32 len
= sizeof(rtc
);
5966 spin_lock_irqsave(&priv
->low_lock
, flags
);
5968 if (priv
->fatal_error
!= 0) {
5969 /* If fatal_error is set then we need to restart */
5970 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
5971 priv
->net_dev
->name
);
5974 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
5975 (rtc
== priv
->last_rtc
)) {
5976 /* Check if firmware is hung */
5977 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
5978 priv
->net_dev
->name
);
5985 priv
->stop_hang_check
= 1;
5988 /* Restart the NIC */
5989 schedule_reset(priv
);
5992 priv
->last_rtc
= rtc
;
5994 if (!priv
->stop_hang_check
)
5995 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
5997 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6000 static void ipw2100_rf_kill(struct work_struct
*work
)
6002 struct ipw2100_priv
*priv
=
6003 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6004 unsigned long flags
;
6006 spin_lock_irqsave(&priv
->low_lock
, flags
);
6008 if (rf_kill_active(priv
)) {
6009 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6010 if (!priv
->stop_rf_kill
)
6011 schedule_delayed_work(&priv
->rf_kill
,
6012 round_jiffies_relative(HZ
));
6016 /* RF Kill is now disabled, so bring the device back up */
6018 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6019 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6021 schedule_reset(priv
);
6023 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6027 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6030 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6032 static const struct net_device_ops ipw2100_netdev_ops
= {
6033 .ndo_open
= ipw2100_open
,
6034 .ndo_stop
= ipw2100_close
,
6035 .ndo_start_xmit
= libipw_xmit
,
6036 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6037 .ndo_set_mac_address
= ipw2100_set_address
,
6038 .ndo_validate_addr
= eth_validate_addr
,
6041 /* Look into using netdev destructor to shutdown libipw? */
6043 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6044 void __iomem
* ioaddr
)
6046 struct ipw2100_priv
*priv
;
6047 struct net_device
*dev
;
6049 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6052 priv
= libipw_priv(dev
);
6053 priv
->ieee
= netdev_priv(dev
);
6054 priv
->pci_dev
= pci_dev
;
6055 priv
->net_dev
= dev
;
6056 priv
->ioaddr
= ioaddr
;
6058 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6059 priv
->ieee
->set_security
= shim__set_security
;
6061 priv
->ieee
->perfect_rssi
= -20;
6062 priv
->ieee
->worst_rssi
= -85;
6064 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6065 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6066 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6067 priv
->wireless_data
.libipw
= priv
->ieee
;
6068 dev
->wireless_data
= &priv
->wireless_data
;
6069 dev
->watchdog_timeo
= 3 * HZ
;
6072 dev
->max_mtu
= LIBIPW_DATA_LEN
;
6074 /* NOTE: We don't use the wireless_handlers hook
6075 * in dev as the system will start throwing WX requests
6076 * to us before we're actually initialized and it just
6077 * ends up causing problems. So, we just handle
6078 * the WX extensions through the ipw2100_ioctl interface */
6080 /* memset() puts everything to 0, so we only have explicitly set
6081 * those values that need to be something else */
6083 /* If power management is turned on, default to AUTO mode */
6084 priv
->power_mode
= IPW_POWER_AUTO
;
6086 #ifdef CONFIG_IPW2100_MONITOR
6087 priv
->config
|= CFG_CRC_CHECK
;
6089 priv
->ieee
->wpa_enabled
= 0;
6090 priv
->ieee
->drop_unencrypted
= 0;
6091 priv
->ieee
->privacy_invoked
= 0;
6092 priv
->ieee
->ieee802_1x
= 1;
6094 /* Set module parameters */
6095 switch (network_mode
) {
6097 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6099 #ifdef CONFIG_IPW2100_MONITOR
6101 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6106 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6111 priv
->status
|= STATUS_RF_KILL_SW
;
6114 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6115 priv
->config
|= CFG_STATIC_CHANNEL
;
6116 priv
->channel
= channel
;
6120 priv
->config
|= CFG_ASSOCIATE
;
6122 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6123 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6124 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6125 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6126 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6127 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6128 priv
->tx_rates
= DEFAULT_TX_RATES
;
6130 strcpy(priv
->nick
, "ipw2100");
6132 spin_lock_init(&priv
->low_lock
);
6133 mutex_init(&priv
->action_mutex
);
6134 mutex_init(&priv
->adapter_mutex
);
6136 init_waitqueue_head(&priv
->wait_command_queue
);
6138 netif_carrier_off(dev
);
6140 INIT_LIST_HEAD(&priv
->msg_free_list
);
6141 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6142 INIT_STAT(&priv
->msg_free_stat
);
6143 INIT_STAT(&priv
->msg_pend_stat
);
6145 INIT_LIST_HEAD(&priv
->tx_free_list
);
6146 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6147 INIT_STAT(&priv
->tx_free_stat
);
6148 INIT_STAT(&priv
->tx_pend_stat
);
6150 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6151 INIT_STAT(&priv
->fw_pend_stat
);
6153 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6154 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6155 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6156 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6157 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6158 INIT_DELAYED_WORK(&priv
->scan_event
, ipw2100_scan_event
);
6160 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6161 ipw2100_irq_tasklet
, (unsigned long)priv
);
6163 /* NOTE: We do not start the deferred work for status checks yet */
6164 priv
->stop_rf_kill
= 1;
6165 priv
->stop_hang_check
= 1;
6170 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6171 const struct pci_device_id
*ent
)
6173 void __iomem
*ioaddr
;
6174 struct net_device
*dev
= NULL
;
6175 struct ipw2100_priv
*priv
= NULL
;
6180 IPW_DEBUG_INFO("enter\n");
6182 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6183 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6188 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6190 printk(KERN_WARNING DRV_NAME
6191 "Error calling ioremap_nocache.\n");
6196 /* allocate and initialize our net_device */
6197 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6199 printk(KERN_WARNING DRV_NAME
6200 "Error calling ipw2100_alloc_device.\n");
6205 /* set up PCI mappings for device */
6206 err
= pci_enable_device(pci_dev
);
6208 printk(KERN_WARNING DRV_NAME
6209 "Error calling pci_enable_device.\n");
6213 priv
= libipw_priv(dev
);
6215 pci_set_master(pci_dev
);
6216 pci_set_drvdata(pci_dev
, priv
);
6218 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6220 printk(KERN_WARNING DRV_NAME
6221 "Error calling pci_set_dma_mask.\n");
6222 pci_disable_device(pci_dev
);
6226 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6228 printk(KERN_WARNING DRV_NAME
6229 "Error calling pci_request_regions.\n");
6230 pci_disable_device(pci_dev
);
6234 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6235 * PCI Tx retries from interfering with C3 CPU state */
6236 pci_read_config_dword(pci_dev
, 0x40, &val
);
6237 if ((val
& 0x0000ff00) != 0)
6238 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6240 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6241 printk(KERN_WARNING DRV_NAME
6242 "Device not found via register read.\n");
6247 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6249 /* Force interrupts to be shut off on the device */
6250 priv
->status
|= STATUS_INT_ENABLED
;
6251 ipw2100_disable_interrupts(priv
);
6253 /* Allocate and initialize the Tx/Rx queues and lists */
6254 if (ipw2100_queues_allocate(priv
)) {
6255 printk(KERN_WARNING DRV_NAME
6256 "Error calling ipw2100_queues_allocate.\n");
6260 ipw2100_queues_initialize(priv
);
6262 err
= request_irq(pci_dev
->irq
,
6263 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6265 printk(KERN_WARNING DRV_NAME
6266 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6269 dev
->irq
= pci_dev
->irq
;
6271 IPW_DEBUG_INFO("Attempting to register device...\n");
6273 printk(KERN_INFO DRV_NAME
6274 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6276 err
= ipw2100_up(priv
, 1);
6280 err
= ipw2100_wdev_init(dev
);
6285 /* Bring up the interface. Pre 0.46, after we registered the
6286 * network device we would call ipw2100_up. This introduced a race
6287 * condition with newer hotplug configurations (network was coming
6288 * up and making calls before the device was initialized).
6290 err
= register_netdev(dev
);
6292 printk(KERN_WARNING DRV_NAME
6293 "Error calling register_netdev.\n");
6298 mutex_lock(&priv
->action_mutex
);
6300 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6302 /* perform this after register_netdev so that dev->name is set */
6303 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6307 /* If the RF Kill switch is disabled, go ahead and complete the
6308 * startup sequence */
6309 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6310 /* Enable the adapter - sends HOST_COMPLETE */
6311 if (ipw2100_enable_adapter(priv
)) {
6312 printk(KERN_WARNING DRV_NAME
6313 ": %s: failed in call to enable adapter.\n",
6314 priv
->net_dev
->name
);
6315 ipw2100_hw_stop_adapter(priv
);
6320 /* Start a scan . . . */
6321 ipw2100_set_scan_options(priv
);
6322 ipw2100_start_scan(priv
);
6325 IPW_DEBUG_INFO("exit\n");
6327 priv
->status
|= STATUS_INITIALIZED
;
6329 mutex_unlock(&priv
->action_mutex
);
6334 mutex_unlock(&priv
->action_mutex
);
6337 if (registered
>= 2)
6338 unregister_netdev(dev
);
6341 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6342 kfree(priv
->ieee
->bg_band
.channels
);
6345 ipw2100_hw_stop_adapter(priv
);
6347 ipw2100_disable_interrupts(priv
);
6350 free_irq(dev
->irq
, priv
);
6352 ipw2100_kill_works(priv
);
6354 /* These are safe to call even if they weren't allocated */
6355 ipw2100_queues_free(priv
);
6356 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6357 &ipw2100_attribute_group
);
6359 free_libipw(dev
, 0);
6362 pci_iounmap(pci_dev
, ioaddr
);
6364 pci_release_regions(pci_dev
);
6365 pci_disable_device(pci_dev
);
6369 static void ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6371 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6372 struct net_device
*dev
= priv
->net_dev
;
6374 mutex_lock(&priv
->action_mutex
);
6376 priv
->status
&= ~STATUS_INITIALIZED
;
6378 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6381 if (ipw2100_firmware
.version
)
6382 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6384 /* Take down the hardware */
6387 /* Release the mutex so that the network subsystem can
6388 * complete any needed calls into the driver... */
6389 mutex_unlock(&priv
->action_mutex
);
6391 /* Unregister the device first - this results in close()
6392 * being called if the device is open. If we free storage
6393 * first, then close() will crash.
6394 * FIXME: remove the comment above. */
6395 unregister_netdev(dev
);
6397 ipw2100_kill_works(priv
);
6399 ipw2100_queues_free(priv
);
6401 /* Free potential debugging firmware snapshot */
6402 ipw2100_snapshot_free(priv
);
6404 free_irq(dev
->irq
, priv
);
6406 pci_iounmap(pci_dev
, priv
->ioaddr
);
6408 /* wiphy_unregister needs to be here, before free_libipw */
6409 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6410 kfree(priv
->ieee
->bg_band
.channels
);
6411 free_libipw(dev
, 0);
6413 pci_release_regions(pci_dev
);
6414 pci_disable_device(pci_dev
);
6416 IPW_DEBUG_INFO("exit\n");
6420 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6422 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6423 struct net_device
*dev
= priv
->net_dev
;
6425 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6427 mutex_lock(&priv
->action_mutex
);
6428 if (priv
->status
& STATUS_INITIALIZED
) {
6429 /* Take down the device; powers it off, etc. */
6433 /* Remove the PRESENT state of the device */
6434 netif_device_detach(dev
);
6436 pci_save_state(pci_dev
);
6437 pci_disable_device(pci_dev
);
6438 pci_set_power_state(pci_dev
, PCI_D3hot
);
6440 priv
->suspend_at
= get_seconds();
6442 mutex_unlock(&priv
->action_mutex
);
6447 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6449 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6450 struct net_device
*dev
= priv
->net_dev
;
6454 if (IPW2100_PM_DISABLED
)
6457 mutex_lock(&priv
->action_mutex
);
6459 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6461 pci_set_power_state(pci_dev
, PCI_D0
);
6462 err
= pci_enable_device(pci_dev
);
6464 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6466 mutex_unlock(&priv
->action_mutex
);
6469 pci_restore_state(pci_dev
);
6472 * Suspend/Resume resets the PCI configuration space, so we have to
6473 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6474 * from interfering with C3 CPU state. pci_restore_state won't help
6475 * here since it only restores the first 64 bytes pci config header.
6477 pci_read_config_dword(pci_dev
, 0x40, &val
);
6478 if ((val
& 0x0000ff00) != 0)
6479 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6481 /* Set the device back into the PRESENT state; this will also wake
6482 * the queue of needed */
6483 netif_device_attach(dev
);
6485 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6487 /* Bring the device back up */
6488 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6489 ipw2100_up(priv
, 0);
6491 mutex_unlock(&priv
->action_mutex
);
6497 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6499 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6501 /* Take down the device; powers it off, etc. */
6504 pci_disable_device(pci_dev
);
6507 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6509 static const struct pci_device_id ipw2100_pci_id_table
[] = {
6510 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6511 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6512 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6513 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6514 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6515 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6516 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6517 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6518 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6519 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6520 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6521 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6522 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6524 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6525 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6526 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6527 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6528 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6530 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6531 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6532 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6533 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6534 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6535 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6536 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6538 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6540 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6541 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6542 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6543 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6544 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6545 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6546 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6548 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6549 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6550 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6551 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6552 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6553 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6555 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6559 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6561 static struct pci_driver ipw2100_pci_driver
= {
6563 .id_table
= ipw2100_pci_id_table
,
6564 .probe
= ipw2100_pci_init_one
,
6565 .remove
= ipw2100_pci_remove_one
,
6567 .suspend
= ipw2100_suspend
,
6568 .resume
= ipw2100_resume
,
6570 .shutdown
= ipw2100_shutdown
,
6574 * Initialize the ipw2100 driver/module
6576 * @returns 0 if ok, < 0 errno node con error.
6578 * Note: we cannot init the /proc stuff until the PCI driver is there,
6579 * or we risk an unlikely race condition on someone accessing
6580 * uninitialized data in the PCI dev struct through /proc.
6582 static int __init
ipw2100_init(void)
6586 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6587 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6589 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6590 PM_QOS_DEFAULT_VALUE
);
6592 ret
= pci_register_driver(&ipw2100_pci_driver
);
6596 #ifdef CONFIG_IPW2100_DEBUG
6597 ipw2100_debug_level
= debug
;
6598 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6599 &driver_attr_debug_level
);
6607 * Cleanup ipw2100 driver registration
6609 static void __exit
ipw2100_exit(void)
6611 /* FIXME: IPG: check that we have no instances of the devices open */
6612 #ifdef CONFIG_IPW2100_DEBUG
6613 driver_remove_file(&ipw2100_pci_driver
.driver
,
6614 &driver_attr_debug_level
);
6616 pci_unregister_driver(&ipw2100_pci_driver
);
6617 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6620 module_init(ipw2100_init
);
6621 module_exit(ipw2100_exit
);
6623 static int ipw2100_wx_get_name(struct net_device
*dev
,
6624 struct iw_request_info
*info
,
6625 union iwreq_data
*wrqu
, char *extra
)
6628 * This can be called at any time. No action lock required
6631 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6632 if (!(priv
->status
& STATUS_ASSOCIATED
))
6633 strcpy(wrqu
->name
, "unassociated");
6635 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6637 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6641 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6642 struct iw_request_info
*info
,
6643 union iwreq_data
*wrqu
, char *extra
)
6645 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6646 struct iw_freq
*fwrq
= &wrqu
->freq
;
6649 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6652 mutex_lock(&priv
->action_mutex
);
6653 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6658 /* if setting by freq convert to channel */
6660 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6661 int f
= fwrq
->m
/ 100000;
6664 while ((c
< REG_MAX_CHANNEL
) &&
6665 (f
!= ipw2100_frequencies
[c
]))
6668 /* hack to fall through */
6674 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6677 } else { /* Set the channel */
6678 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6679 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6683 mutex_unlock(&priv
->action_mutex
);
6687 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6688 struct iw_request_info
*info
,
6689 union iwreq_data
*wrqu
, char *extra
)
6692 * This can be called at any time. No action lock required
6695 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6699 /* If we are associated, trying to associate, or have a statically
6700 * configured CHANNEL then return that; otherwise return ANY */
6701 if (priv
->config
& CFG_STATIC_CHANNEL
||
6702 priv
->status
& STATUS_ASSOCIATED
)
6703 wrqu
->freq
.m
= priv
->channel
;
6707 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6712 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6713 struct iw_request_info
*info
,
6714 union iwreq_data
*wrqu
, char *extra
)
6716 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6719 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6721 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6724 mutex_lock(&priv
->action_mutex
);
6725 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6730 switch (wrqu
->mode
) {
6731 #ifdef CONFIG_IPW2100_MONITOR
6732 case IW_MODE_MONITOR
:
6733 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6735 #endif /* CONFIG_IPW2100_MONITOR */
6737 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6742 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6747 mutex_unlock(&priv
->action_mutex
);
6751 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6752 struct iw_request_info
*info
,
6753 union iwreq_data
*wrqu
, char *extra
)
6756 * This can be called at any time. No action lock required
6759 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6761 wrqu
->mode
= priv
->ieee
->iw_mode
;
6762 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6767 #define POWER_MODES 5
6769 /* Values are in microsecond */
6770 static const s32 timeout_duration
[POWER_MODES
] = {
6778 static const s32 period_duration
[POWER_MODES
] = {
6786 static int ipw2100_wx_get_range(struct net_device
*dev
,
6787 struct iw_request_info
*info
,
6788 union iwreq_data
*wrqu
, char *extra
)
6791 * This can be called at any time. No action lock required
6794 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6795 struct iw_range
*range
= (struct iw_range
*)extra
;
6799 wrqu
->data
.length
= sizeof(*range
);
6800 memset(range
, 0, sizeof(*range
));
6802 /* Let's try to keep this struct in the same order as in
6803 * linux/include/wireless.h
6806 /* TODO: See what values we can set, and remove the ones we can't
6807 * set, or fill them with some default data.
6810 /* ~5 Mb/s real (802.11b) */
6811 range
->throughput
= 5 * 1000 * 1000;
6813 // range->sensitivity; /* signal level threshold range */
6815 range
->max_qual
.qual
= 100;
6816 /* TODO: Find real max RSSI and stick here */
6817 range
->max_qual
.level
= 0;
6818 range
->max_qual
.noise
= 0;
6819 range
->max_qual
.updated
= 7; /* Updated all three */
6821 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6822 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6823 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6824 range
->avg_qual
.noise
= 0;
6825 range
->avg_qual
.updated
= 7; /* Updated all three */
6827 range
->num_bitrates
= RATE_COUNT
;
6829 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6830 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6833 range
->min_rts
= MIN_RTS_THRESHOLD
;
6834 range
->max_rts
= MAX_RTS_THRESHOLD
;
6835 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6836 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6838 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6839 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6840 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6841 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6843 /* How to decode max/min PM period */
6844 range
->pmp_flags
= IW_POWER_PERIOD
;
6845 /* How to decode max/min PM period */
6846 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6847 /* What PM options are supported */
6848 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6850 range
->encoding_size
[0] = 5;
6851 range
->encoding_size
[1] = 13; /* Different token sizes */
6852 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6853 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6854 // range->encoding_login_index; /* token index for login token */
6856 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6857 range
->txpower_capa
= IW_TXPOW_DBM
;
6858 range
->num_txpower
= IW_MAX_TXPOWER
;
6859 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6862 ((IPW_TX_POWER_MAX_DBM
-
6863 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6864 range
->txpower
[i
] = level
/ 16;
6866 range
->txpower_capa
= 0;
6867 range
->num_txpower
= 0;
6870 /* Set the Wireless Extension versions */
6871 range
->we_version_compiled
= WIRELESS_EXT
;
6872 range
->we_version_source
= 18;
6874 // range->retry_capa; /* What retry options are supported */
6875 // range->retry_flags; /* How to decode max/min retry limit */
6876 // range->r_time_flags; /* How to decode max/min retry life */
6877 // range->min_retry; /* Minimal number of retries */
6878 // range->max_retry; /* Maximal number of retries */
6879 // range->min_r_time; /* Minimal retry lifetime */
6880 // range->max_r_time; /* Maximal retry lifetime */
6882 range
->num_channels
= FREQ_COUNT
;
6885 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6886 // TODO: Include only legal frequencies for some countries
6887 // if (local->channel_mask & (1 << i)) {
6888 range
->freq
[val
].i
= i
+ 1;
6889 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6890 range
->freq
[val
].e
= 1;
6893 if (val
== IW_MAX_FREQUENCIES
)
6896 range
->num_frequency
= val
;
6898 /* Event capability (kernel + driver) */
6899 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6900 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6901 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6903 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6904 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6906 IPW_DEBUG_WX("GET Range\n");
6911 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6912 struct iw_request_info
*info
,
6913 union iwreq_data
*wrqu
, char *extra
)
6915 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6919 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6922 mutex_lock(&priv
->action_mutex
);
6923 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6928 if (is_broadcast_ether_addr(wrqu
->ap_addr
.sa_data
) ||
6929 is_zero_ether_addr(wrqu
->ap_addr
.sa_data
)) {
6930 /* we disable mandatory BSSID association */
6931 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6932 priv
->config
&= ~CFG_STATIC_BSSID
;
6933 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
6937 priv
->config
|= CFG_STATIC_BSSID
;
6938 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
6940 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
6942 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
6945 mutex_unlock(&priv
->action_mutex
);
6949 static int ipw2100_wx_get_wap(struct net_device
*dev
,
6950 struct iw_request_info
*info
,
6951 union iwreq_data
*wrqu
, char *extra
)
6954 * This can be called at any time. No action lock required
6957 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6959 /* If we are associated, trying to associate, or have a statically
6960 * configured BSSID then return that; otherwise return ANY */
6961 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
6962 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
6963 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
6965 eth_zero_addr(wrqu
->ap_addr
.sa_data
);
6967 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
6971 static int ipw2100_wx_set_essid(struct net_device
*dev
,
6972 struct iw_request_info
*info
,
6973 union iwreq_data
*wrqu
, char *extra
)
6975 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6976 char *essid
= ""; /* ANY */
6980 mutex_lock(&priv
->action_mutex
);
6981 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6986 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
6987 length
= wrqu
->essid
.length
;
6992 IPW_DEBUG_WX("Setting ESSID to ANY\n");
6993 priv
->config
&= ~CFG_STATIC_ESSID
;
6994 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
6998 length
= min(length
, IW_ESSID_MAX_SIZE
);
7000 priv
->config
|= CFG_STATIC_ESSID
;
7002 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7003 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7008 IPW_DEBUG_WX("Setting ESSID: '%*pE' (%d)\n", length
, essid
, length
);
7010 priv
->essid_len
= length
;
7011 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7013 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7016 mutex_unlock(&priv
->action_mutex
);
7020 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7021 struct iw_request_info
*info
,
7022 union iwreq_data
*wrqu
, char *extra
)
7025 * This can be called at any time. No action lock required
7028 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7030 /* If we are associated, trying to associate, or have a statically
7031 * configured ESSID then return that; otherwise return ANY */
7032 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7033 IPW_DEBUG_WX("Getting essid: '%*pE'\n",
7034 priv
->essid_len
, priv
->essid
);
7035 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7036 wrqu
->essid
.length
= priv
->essid_len
;
7037 wrqu
->essid
.flags
= 1; /* active */
7039 IPW_DEBUG_WX("Getting essid: ANY\n");
7040 wrqu
->essid
.length
= 0;
7041 wrqu
->essid
.flags
= 0; /* active */
7047 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7048 struct iw_request_info
*info
,
7049 union iwreq_data
*wrqu
, char *extra
)
7052 * This can be called at any time. No action lock required
7055 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7057 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7060 wrqu
->data
.length
= min_t(size_t, wrqu
->data
.length
, sizeof(priv
->nick
));
7061 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7062 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7064 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7069 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7070 struct iw_request_info
*info
,
7071 union iwreq_data
*wrqu
, char *extra
)
7074 * This can be called at any time. No action lock required
7077 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7079 wrqu
->data
.length
= strlen(priv
->nick
);
7080 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7081 wrqu
->data
.flags
= 1; /* active */
7083 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7088 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7089 struct iw_request_info
*info
,
7090 union iwreq_data
*wrqu
, char *extra
)
7092 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7093 u32 target_rate
= wrqu
->bitrate
.value
;
7097 mutex_lock(&priv
->action_mutex
);
7098 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7105 if (target_rate
== 1000000 ||
7106 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7107 rate
|= TX_RATE_1_MBIT
;
7108 if (target_rate
== 2000000 ||
7109 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7110 rate
|= TX_RATE_2_MBIT
;
7111 if (target_rate
== 5500000 ||
7112 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7113 rate
|= TX_RATE_5_5_MBIT
;
7114 if (target_rate
== 11000000 ||
7115 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7116 rate
|= TX_RATE_11_MBIT
;
7118 rate
= DEFAULT_TX_RATES
;
7120 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7122 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7124 mutex_unlock(&priv
->action_mutex
);
7128 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7129 struct iw_request_info
*info
,
7130 union iwreq_data
*wrqu
, char *extra
)
7132 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7134 unsigned int len
= sizeof(val
);
7137 if (!(priv
->status
& STATUS_ENABLED
) ||
7138 priv
->status
& STATUS_RF_KILL_MASK
||
7139 !(priv
->status
& STATUS_ASSOCIATED
)) {
7140 wrqu
->bitrate
.value
= 0;
7144 mutex_lock(&priv
->action_mutex
);
7145 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7150 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7152 IPW_DEBUG_WX("failed querying ordinals.\n");
7156 switch (val
& TX_RATE_MASK
) {
7157 case TX_RATE_1_MBIT
:
7158 wrqu
->bitrate
.value
= 1000000;
7160 case TX_RATE_2_MBIT
:
7161 wrqu
->bitrate
.value
= 2000000;
7163 case TX_RATE_5_5_MBIT
:
7164 wrqu
->bitrate
.value
= 5500000;
7166 case TX_RATE_11_MBIT
:
7167 wrqu
->bitrate
.value
= 11000000;
7170 wrqu
->bitrate
.value
= 0;
7173 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7176 mutex_unlock(&priv
->action_mutex
);
7180 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7181 struct iw_request_info
*info
,
7182 union iwreq_data
*wrqu
, char *extra
)
7184 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7187 /* Auto RTS not yet supported */
7188 if (wrqu
->rts
.fixed
== 0)
7191 mutex_lock(&priv
->action_mutex
);
7192 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7197 if (wrqu
->rts
.disabled
)
7198 value
= priv
->rts_threshold
| RTS_DISABLED
;
7200 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7204 value
= wrqu
->rts
.value
;
7207 err
= ipw2100_set_rts_threshold(priv
, value
);
7209 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7211 mutex_unlock(&priv
->action_mutex
);
7215 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7216 struct iw_request_info
*info
,
7217 union iwreq_data
*wrqu
, char *extra
)
7220 * This can be called at any time. No action lock required
7223 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7225 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7226 wrqu
->rts
.fixed
= 1; /* no auto select */
7228 /* If RTS is set to the default value, then it is disabled */
7229 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7231 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7236 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7237 struct iw_request_info
*info
,
7238 union iwreq_data
*wrqu
, char *extra
)
7240 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7243 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7244 return -EINPROGRESS
;
7246 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7249 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7252 if (wrqu
->txpower
.fixed
== 0)
7253 value
= IPW_TX_POWER_DEFAULT
;
7255 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7256 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7259 value
= wrqu
->txpower
.value
;
7262 mutex_lock(&priv
->action_mutex
);
7263 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7268 err
= ipw2100_set_tx_power(priv
, value
);
7270 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7273 mutex_unlock(&priv
->action_mutex
);
7277 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7278 struct iw_request_info
*info
,
7279 union iwreq_data
*wrqu
, char *extra
)
7282 * This can be called at any time. No action lock required
7285 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7287 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7289 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7290 wrqu
->txpower
.fixed
= 0;
7291 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7293 wrqu
->txpower
.fixed
= 1;
7294 wrqu
->txpower
.value
= priv
->tx_power
;
7297 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7299 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7304 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7305 struct iw_request_info
*info
,
7306 union iwreq_data
*wrqu
, char *extra
)
7309 * This can be called at any time. No action lock required
7312 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7314 if (!wrqu
->frag
.fixed
)
7317 if (wrqu
->frag
.disabled
) {
7318 priv
->frag_threshold
|= FRAG_DISABLED
;
7319 priv
->ieee
->fts
= DEFAULT_FTS
;
7321 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7322 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7325 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7326 priv
->frag_threshold
= priv
->ieee
->fts
;
7329 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7334 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7335 struct iw_request_info
*info
,
7336 union iwreq_data
*wrqu
, char *extra
)
7339 * This can be called at any time. No action lock required
7342 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7343 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7344 wrqu
->frag
.fixed
= 0; /* no auto select */
7345 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7347 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7352 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7353 struct iw_request_info
*info
,
7354 union iwreq_data
*wrqu
, char *extra
)
7356 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7359 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7362 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7365 mutex_lock(&priv
->action_mutex
);
7366 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7371 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7372 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7373 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7378 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7379 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7380 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7385 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7387 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7389 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7392 mutex_unlock(&priv
->action_mutex
);
7396 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7397 struct iw_request_info
*info
,
7398 union iwreq_data
*wrqu
, char *extra
)
7401 * This can be called at any time. No action lock required
7404 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7406 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7408 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7411 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7412 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7413 wrqu
->retry
.value
= priv
->long_retry_limit
;
7416 (priv
->short_retry_limit
!=
7417 priv
->long_retry_limit
) ?
7418 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7420 wrqu
->retry
.value
= priv
->short_retry_limit
;
7423 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7428 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7429 struct iw_request_info
*info
,
7430 union iwreq_data
*wrqu
, char *extra
)
7432 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7435 mutex_lock(&priv
->action_mutex
);
7436 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7441 IPW_DEBUG_WX("Initiating scan...\n");
7443 priv
->user_requested_scan
= 1;
7444 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7445 IPW_DEBUG_WX("Start scan failed.\n");
7447 /* TODO: Mark a scan as pending so when hardware initialized
7452 mutex_unlock(&priv
->action_mutex
);
7456 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7457 struct iw_request_info
*info
,
7458 union iwreq_data
*wrqu
, char *extra
)
7461 * This can be called at any time. No action lock required
7464 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7465 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7469 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7471 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7472 struct iw_request_info
*info
,
7473 union iwreq_data
*wrqu
, char *key
)
7476 * No check of STATUS_INITIALIZED required
7479 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7480 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7483 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7484 struct iw_request_info
*info
,
7485 union iwreq_data
*wrqu
, char *key
)
7488 * This can be called at any time. No action lock required
7491 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7492 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7495 static int ipw2100_wx_set_power(struct net_device
*dev
,
7496 struct iw_request_info
*info
,
7497 union iwreq_data
*wrqu
, char *extra
)
7499 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7502 mutex_lock(&priv
->action_mutex
);
7503 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7508 if (wrqu
->power
.disabled
) {
7509 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7510 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7511 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7515 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7516 case IW_POWER_ON
: /* If not specified */
7517 case IW_POWER_MODE
: /* If set all mask */
7518 case IW_POWER_ALL_R
: /* If explicitly state all */
7520 default: /* Otherwise we don't support it */
7521 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7527 /* If the user hasn't specified a power management mode yet, default
7529 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7530 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7532 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7535 mutex_unlock(&priv
->action_mutex
);
7540 static int ipw2100_wx_get_power(struct net_device
*dev
,
7541 struct iw_request_info
*info
,
7542 union iwreq_data
*wrqu
, char *extra
)
7545 * This can be called at any time. No action lock required
7548 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7550 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7551 wrqu
->power
.disabled
= 1;
7553 wrqu
->power
.disabled
= 0;
7554 wrqu
->power
.flags
= 0;
7557 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7567 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7568 struct iw_request_info
*info
,
7569 union iwreq_data
*wrqu
, char *extra
)
7572 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7573 struct libipw_device
*ieee
= priv
->ieee
;
7576 if (!ieee
->wpa_enabled
)
7579 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7580 (wrqu
->data
.length
&& extra
== NULL
))
7583 if (wrqu
->data
.length
) {
7584 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7588 kfree(ieee
->wpa_ie
);
7590 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7592 kfree(ieee
->wpa_ie
);
7593 ieee
->wpa_ie
= NULL
;
7594 ieee
->wpa_ie_len
= 0;
7597 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7603 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7604 struct iw_request_info
*info
,
7605 union iwreq_data
*wrqu
, char *extra
)
7607 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7608 struct libipw_device
*ieee
= priv
->ieee
;
7610 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7611 wrqu
->data
.length
= 0;
7615 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7618 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7619 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7625 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7626 struct iw_request_info
*info
,
7627 union iwreq_data
*wrqu
, char *extra
)
7629 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7630 struct libipw_device
*ieee
= priv
->ieee
;
7631 struct iw_param
*param
= &wrqu
->param
;
7632 struct lib80211_crypt_data
*crypt
;
7633 unsigned long flags
;
7636 switch (param
->flags
& IW_AUTH_INDEX
) {
7637 case IW_AUTH_WPA_VERSION
:
7638 case IW_AUTH_CIPHER_PAIRWISE
:
7639 case IW_AUTH_CIPHER_GROUP
:
7640 case IW_AUTH_KEY_MGMT
:
7642 * ipw2200 does not use these parameters
7646 case IW_AUTH_TKIP_COUNTERMEASURES
:
7647 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7648 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7651 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7654 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7656 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7658 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7662 case IW_AUTH_DROP_UNENCRYPTED
:{
7665 * wpa_supplicant calls set_wpa_enabled when the driver
7666 * is loaded and unloaded, regardless of if WPA is being
7667 * used. No other calls are made which can be used to
7668 * determine if encryption will be used or not prior to
7669 * association being expected. If encryption is not being
7670 * used, drop_unencrypted is set to false, else true -- we
7671 * can use this to determine if the CAP_PRIVACY_ON bit should
7674 struct libipw_security sec
= {
7675 .flags
= SEC_ENABLED
,
7676 .enabled
= param
->value
,
7678 priv
->ieee
->drop_unencrypted
= param
->value
;
7679 /* We only change SEC_LEVEL for open mode. Others
7680 * are set by ipw_wpa_set_encryption.
7682 if (!param
->value
) {
7683 sec
.flags
|= SEC_LEVEL
;
7684 sec
.level
= SEC_LEVEL_0
;
7686 sec
.flags
|= SEC_LEVEL
;
7687 sec
.level
= SEC_LEVEL_1
;
7689 if (priv
->ieee
->set_security
)
7690 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7694 case IW_AUTH_80211_AUTH_ALG
:
7695 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7698 case IW_AUTH_WPA_ENABLED
:
7699 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7702 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7703 ieee
->ieee802_1x
= param
->value
;
7706 //case IW_AUTH_ROAMING_CONTROL:
7707 case IW_AUTH_PRIVACY_INVOKED
:
7708 ieee
->privacy_invoked
= param
->value
;
7718 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7719 struct iw_request_info
*info
,
7720 union iwreq_data
*wrqu
, char *extra
)
7722 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7723 struct libipw_device
*ieee
= priv
->ieee
;
7724 struct lib80211_crypt_data
*crypt
;
7725 struct iw_param
*param
= &wrqu
->param
;
7728 switch (param
->flags
& IW_AUTH_INDEX
) {
7729 case IW_AUTH_WPA_VERSION
:
7730 case IW_AUTH_CIPHER_PAIRWISE
:
7731 case IW_AUTH_CIPHER_GROUP
:
7732 case IW_AUTH_KEY_MGMT
:
7734 * wpa_supplicant will control these internally
7739 case IW_AUTH_TKIP_COUNTERMEASURES
:
7740 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7741 if (!crypt
|| !crypt
->ops
->get_flags
) {
7742 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7743 "crypt not set!\n");
7747 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7748 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7752 case IW_AUTH_DROP_UNENCRYPTED
:
7753 param
->value
= ieee
->drop_unencrypted
;
7756 case IW_AUTH_80211_AUTH_ALG
:
7757 param
->value
= priv
->ieee
->sec
.auth_mode
;
7760 case IW_AUTH_WPA_ENABLED
:
7761 param
->value
= ieee
->wpa_enabled
;
7764 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7765 param
->value
= ieee
->ieee802_1x
;
7768 case IW_AUTH_ROAMING_CONTROL
:
7769 case IW_AUTH_PRIVACY_INVOKED
:
7770 param
->value
= ieee
->privacy_invoked
;
7779 /* SIOCSIWENCODEEXT */
7780 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7781 struct iw_request_info
*info
,
7782 union iwreq_data
*wrqu
, char *extra
)
7784 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7785 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7788 /* SIOCGIWENCODEEXT */
7789 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7790 struct iw_request_info
*info
,
7791 union iwreq_data
*wrqu
, char *extra
)
7793 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7794 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7798 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7799 struct iw_request_info
*info
,
7800 union iwreq_data
*wrqu
, char *extra
)
7802 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7803 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7806 reason
= cpu_to_le16(mlme
->reason_code
);
7808 switch (mlme
->cmd
) {
7809 case IW_MLME_DEAUTH
:
7813 case IW_MLME_DISASSOC
:
7814 ipw2100_disassociate_bssid(priv
);
7828 #ifdef CONFIG_IPW2100_MONITOR
7829 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7830 struct iw_request_info
*info
,
7831 union iwreq_data
*wrqu
, char *extra
)
7833 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7834 int *parms
= (int *)extra
;
7835 int enable
= (parms
[0] > 0);
7838 mutex_lock(&priv
->action_mutex
);
7839 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7845 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7846 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7849 priv
->channel
= parms
[1];
7850 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7852 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7853 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7856 mutex_unlock(&priv
->action_mutex
);
7860 static int ipw2100_wx_reset(struct net_device
*dev
,
7861 struct iw_request_info
*info
,
7862 union iwreq_data
*wrqu
, char *extra
)
7864 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7865 if (priv
->status
& STATUS_INITIALIZED
)
7866 schedule_reset(priv
);
7872 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7873 struct iw_request_info
*info
,
7874 union iwreq_data
*wrqu
, char *extra
)
7876 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7877 int err
= 0, mode
= *(int *)extra
;
7879 mutex_lock(&priv
->action_mutex
);
7880 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7885 if ((mode
< 0) || (mode
> POWER_MODES
))
7886 mode
= IPW_POWER_AUTO
;
7888 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7889 err
= ipw2100_set_power_mode(priv
, mode
);
7891 mutex_unlock(&priv
->action_mutex
);
7895 #define MAX_POWER_STRING 80
7896 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7897 struct iw_request_info
*info
,
7898 union iwreq_data
*wrqu
, char *extra
)
7901 * This can be called at any time. No action lock required
7904 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7905 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7906 s32 timeout
, period
;
7908 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7909 snprintf(extra
, MAX_POWER_STRING
,
7910 "Power save level: %d (Off)", level
);
7913 case IPW_POWER_MODE_CAM
:
7914 snprintf(extra
, MAX_POWER_STRING
,
7915 "Power save level: %d (None)", level
);
7917 case IPW_POWER_AUTO
:
7918 snprintf(extra
, MAX_POWER_STRING
,
7919 "Power save level: %d (Auto)", level
);
7922 timeout
= timeout_duration
[level
- 1] / 1000;
7923 period
= period_duration
[level
- 1] / 1000;
7924 snprintf(extra
, MAX_POWER_STRING
,
7925 "Power save level: %d "
7926 "(Timeout %dms, Period %dms)",
7927 level
, timeout
, period
);
7931 wrqu
->data
.length
= strlen(extra
) + 1;
7936 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
7937 struct iw_request_info
*info
,
7938 union iwreq_data
*wrqu
, char *extra
)
7940 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7941 int err
, mode
= *(int *)extra
;
7943 mutex_lock(&priv
->action_mutex
);
7944 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7950 priv
->config
|= CFG_LONG_PREAMBLE
;
7952 priv
->config
&= ~CFG_LONG_PREAMBLE
;
7958 err
= ipw2100_system_config(priv
, 0);
7961 mutex_unlock(&priv
->action_mutex
);
7965 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
7966 struct iw_request_info
*info
,
7967 union iwreq_data
*wrqu
, char *extra
)
7970 * This can be called at any time. No action lock required
7973 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7975 if (priv
->config
& CFG_LONG_PREAMBLE
)
7976 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
7978 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
7983 #ifdef CONFIG_IPW2100_MONITOR
7984 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
7985 struct iw_request_info
*info
,
7986 union iwreq_data
*wrqu
, char *extra
)
7988 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7989 int err
, mode
= *(int *)extra
;
7991 mutex_lock(&priv
->action_mutex
);
7992 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7998 priv
->config
|= CFG_CRC_CHECK
;
8000 priv
->config
&= ~CFG_CRC_CHECK
;
8008 mutex_unlock(&priv
->action_mutex
);
8012 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8013 struct iw_request_info
*info
,
8014 union iwreq_data
*wrqu
, char *extra
)
8017 * This can be called at any time. No action lock required
8020 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8022 if (priv
->config
& CFG_CRC_CHECK
)
8023 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8025 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8029 #endif /* CONFIG_IPW2100_MONITOR */
8031 static iw_handler ipw2100_wx_handlers
[] = {
8032 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8033 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8034 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8035 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8036 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8037 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8038 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8039 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8040 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8041 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8042 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8043 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8044 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8045 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8046 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8047 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8048 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8049 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8050 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8051 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8052 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8053 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8054 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8055 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8056 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8057 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8058 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8059 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8060 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8061 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8062 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8063 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8064 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8065 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8066 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8069 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8070 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8071 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8072 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8073 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8074 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8075 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8076 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8078 static const struct iw_priv_args ipw2100_private_args
[] = {
8080 #ifdef CONFIG_IPW2100_MONITOR
8082 IPW2100_PRIV_SET_MONITOR
,
8083 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8086 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8087 #endif /* CONFIG_IPW2100_MONITOR */
8090 IPW2100_PRIV_SET_POWER
,
8091 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8093 IPW2100_PRIV_GET_POWER
,
8094 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8097 IPW2100_PRIV_SET_LONGPREAMBLE
,
8098 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8100 IPW2100_PRIV_GET_LONGPREAMBLE
,
8101 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8102 #ifdef CONFIG_IPW2100_MONITOR
8104 IPW2100_PRIV_SET_CRC_CHECK
,
8105 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8107 IPW2100_PRIV_GET_CRC_CHECK
,
8108 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8109 #endif /* CONFIG_IPW2100_MONITOR */
8112 static iw_handler ipw2100_private_handler
[] = {
8113 #ifdef CONFIG_IPW2100_MONITOR
8114 ipw2100_wx_set_promisc
,
8116 #else /* CONFIG_IPW2100_MONITOR */
8119 #endif /* CONFIG_IPW2100_MONITOR */
8120 ipw2100_wx_set_powermode
,
8121 ipw2100_wx_get_powermode
,
8122 ipw2100_wx_set_preamble
,
8123 ipw2100_wx_get_preamble
,
8124 #ifdef CONFIG_IPW2100_MONITOR
8125 ipw2100_wx_set_crc_check
,
8126 ipw2100_wx_get_crc_check
,
8127 #else /* CONFIG_IPW2100_MONITOR */
8130 #endif /* CONFIG_IPW2100_MONITOR */
8134 * Get wireless statistics.
8135 * Called by /proc/net/wireless
8136 * Also called by SIOCGIWSTATS
8138 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8153 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8154 struct iw_statistics
*wstats
;
8155 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8156 u32 ord_len
= sizeof(u32
);
8159 return (struct iw_statistics
*)NULL
;
8161 wstats
= &priv
->wstats
;
8163 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8164 * ipw2100_wx_wireless_stats seems to be called before fw is
8165 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8166 * and associated; if not associcated, the values are all meaningless
8167 * anyway, so set them all to NULL and INVALID */
8168 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8169 wstats
->miss
.beacon
= 0;
8170 wstats
->discard
.retries
= 0;
8171 wstats
->qual
.qual
= 0;
8172 wstats
->qual
.level
= 0;
8173 wstats
->qual
.noise
= 0;
8174 wstats
->qual
.updated
= 7;
8175 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8176 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8180 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8181 &missed_beacons
, &ord_len
))
8182 goto fail_get_ordinal
;
8184 /* If we don't have a connection the quality and level is 0 */
8185 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8186 wstats
->qual
.qual
= 0;
8187 wstats
->qual
.level
= 0;
8189 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8191 goto fail_get_ordinal
;
8192 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8194 rssi_qual
= rssi
* POOR
/ 10;
8196 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8198 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8200 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8203 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8206 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8207 &tx_retries
, &ord_len
))
8208 goto fail_get_ordinal
;
8210 if (tx_retries
> 75)
8211 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8212 else if (tx_retries
> 70)
8213 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8214 else if (tx_retries
> 65)
8215 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8216 else if (tx_retries
> 50)
8217 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8220 tx_qual
= (50 - tx_retries
) *
8221 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8223 if (missed_beacons
> 50)
8224 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8225 else if (missed_beacons
> 40)
8226 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8228 else if (missed_beacons
> 32)
8229 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8231 else if (missed_beacons
> 20)
8232 beacon_qual
= (32 - missed_beacons
) *
8233 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8235 beacon_qual
= (20 - missed_beacons
) *
8236 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8238 quality
= min(tx_qual
, rssi_qual
);
8239 quality
= min(beacon_qual
, quality
);
8241 #ifdef CONFIG_IPW2100_DEBUG
8242 if (beacon_qual
== quality
)
8243 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8244 else if (tx_qual
== quality
)
8245 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8246 else if (quality
!= 100)
8247 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8249 IPW_DEBUG_WX("Quality not clamped.\n");
8252 wstats
->qual
.qual
= quality
;
8253 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8256 wstats
->qual
.noise
= 0;
8257 wstats
->qual
.updated
= 7;
8258 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8260 /* FIXME: this is percent and not a # */
8261 wstats
->miss
.beacon
= missed_beacons
;
8263 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8264 &tx_failures
, &ord_len
))
8265 goto fail_get_ordinal
;
8266 wstats
->discard
.retries
= tx_failures
;
8271 IPW_DEBUG_WX("failed querying ordinals.\n");
8273 return (struct iw_statistics
*)NULL
;
8276 static const struct iw_handler_def ipw2100_wx_handler_def
= {
8277 .standard
= ipw2100_wx_handlers
,
8278 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8279 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8280 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8281 .private = (iw_handler
*) ipw2100_private_handler
,
8282 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8283 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8286 static void ipw2100_wx_event_work(struct work_struct
*work
)
8288 struct ipw2100_priv
*priv
=
8289 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8290 union iwreq_data wrqu
;
8291 unsigned int len
= ETH_ALEN
;
8293 if (priv
->status
& STATUS_STOPPING
)
8296 mutex_lock(&priv
->action_mutex
);
8298 IPW_DEBUG_WX("enter\n");
8300 mutex_unlock(&priv
->action_mutex
);
8302 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8304 /* Fetch BSSID from the hardware */
8305 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8306 priv
->status
& STATUS_RF_KILL_MASK
||
8307 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8308 &priv
->bssid
, &len
)) {
8309 eth_zero_addr(wrqu
.ap_addr
.sa_data
);
8311 /* We now have the BSSID, so can finish setting to the full
8312 * associated state */
8313 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8314 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8315 priv
->status
&= ~STATUS_ASSOCIATING
;
8316 priv
->status
|= STATUS_ASSOCIATED
;
8317 netif_carrier_on(priv
->net_dev
);
8318 netif_wake_queue(priv
->net_dev
);
8321 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8322 IPW_DEBUG_WX("Configuring ESSID\n");
8323 mutex_lock(&priv
->action_mutex
);
8324 /* This is a disassociation event, so kick the firmware to
8325 * look for another AP */
8326 if (priv
->config
& CFG_STATIC_ESSID
)
8327 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8330 ipw2100_set_essid(priv
, NULL
, 0, 0);
8331 mutex_unlock(&priv
->action_mutex
);
8334 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8337 #define IPW2100_FW_MAJOR_VERSION 1
8338 #define IPW2100_FW_MINOR_VERSION 3
8340 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8341 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8343 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8344 IPW2100_FW_MAJOR_VERSION)
8346 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8347 "." __stringify(IPW2100_FW_MINOR_VERSION)
8349 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8353 BINARY FIRMWARE HEADER FORMAT
8357 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8360 C fw_len firmware data
8361 12 + fw_len uc_len microcode data
8365 struct ipw2100_fw_header
{
8368 unsigned int fw_size
;
8369 unsigned int uc_size
;
8372 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8374 struct ipw2100_fw_header
*h
=
8375 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8377 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8378 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8379 "(detected version id of %u). "
8380 "See Documentation/networking/README.ipw2100\n",
8385 fw
->version
= h
->version
;
8386 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8387 fw
->fw
.size
= h
->fw_size
;
8388 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8389 fw
->uc
.size
= h
->uc_size
;
8394 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8395 struct ipw2100_fw
*fw
)
8400 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8401 priv
->net_dev
->name
);
8403 switch (priv
->ieee
->iw_mode
) {
8405 fw_name
= IPW2100_FW_NAME("-i");
8407 #ifdef CONFIG_IPW2100_MONITOR
8408 case IW_MODE_MONITOR
:
8409 fw_name
= IPW2100_FW_NAME("-p");
8414 fw_name
= IPW2100_FW_NAME("");
8418 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8421 printk(KERN_ERR DRV_NAME
": "
8422 "%s: Firmware '%s' not available or load failed.\n",
8423 priv
->net_dev
->name
, fw_name
);
8426 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8427 fw
->fw_entry
->size
);
8429 ipw2100_mod_firmware_load(fw
);
8434 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8435 #ifdef CONFIG_IPW2100_MONITOR
8436 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8438 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8440 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8441 struct ipw2100_fw
*fw
)
8444 release_firmware(fw
->fw_entry
);
8445 fw
->fw_entry
= NULL
;
8448 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8451 char ver
[MAX_FW_VERSION_LEN
];
8452 u32 len
= MAX_FW_VERSION_LEN
;
8455 /* firmware version is an ascii string (max len of 14) */
8456 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8461 for (i
= 0; i
< len
; i
++)
8467 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8471 u32 len
= sizeof(ver
);
8472 /* microcode version is a 32 bit integer */
8473 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8475 return snprintf(buf
, max
, "%08X", ver
);
8479 * On exit, the firmware will have been freed from the fw list
8481 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8483 /* firmware is constructed of N contiguous entries, each entry is
8487 * 0 4 address to write to
8488 * 4 2 length of data run
8494 const unsigned char *firmware_data
= fw
->fw
.data
;
8495 unsigned int firmware_data_left
= fw
->fw
.size
;
8497 while (firmware_data_left
> 0) {
8498 addr
= *(u32
*) (firmware_data
);
8500 firmware_data_left
-= 4;
8502 len
= *(u16
*) (firmware_data
);
8504 firmware_data_left
-= 2;
8507 printk(KERN_ERR DRV_NAME
": "
8508 "Invalid firmware run-length of %d bytes\n",
8513 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8514 firmware_data
+= len
;
8515 firmware_data_left
-= len
;
8521 struct symbol_alive_response
{
8530 u16 clock_settle_time
; // 1us LSB
8531 u16 powerup_settle_time
; // 1us LSB
8532 u16 hop_settle_time
; // 1us LSB
8533 u8 date
[3]; // month, day, year
8534 u8 time
[2]; // hours, minutes
8538 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8539 struct ipw2100_fw
*fw
)
8541 struct net_device
*dev
= priv
->net_dev
;
8542 const unsigned char *microcode_data
= fw
->uc
.data
;
8543 unsigned int microcode_data_left
= fw
->uc
.size
;
8544 void __iomem
*reg
= priv
->ioaddr
;
8546 struct symbol_alive_response response
;
8550 /* Symbol control */
8551 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8553 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8557 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8559 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8562 /* EN_CS_ACCESS bit to reset control store pointer */
8563 write_nic_byte(dev
, 0x210000, 0x40);
8565 write_nic_byte(dev
, 0x210000, 0x0);
8567 write_nic_byte(dev
, 0x210000, 0x40);
8570 /* copy microcode from buffer into Symbol */
8572 while (microcode_data_left
> 0) {
8573 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8574 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8575 microcode_data_left
-= 2;
8578 /* EN_CS_ACCESS bit to reset the control store pointer */
8579 write_nic_byte(dev
, 0x210000, 0x0);
8582 /* Enable System (Reg 0)
8583 * first enable causes garbage in RX FIFO */
8584 write_nic_byte(dev
, 0x210000, 0x0);
8586 write_nic_byte(dev
, 0x210000, 0x80);
8589 /* Reset External Baseband Reg */
8590 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8592 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8595 /* HW Config (Reg 5) */
8596 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8598 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8601 /* Enable System (Reg 0)
8602 * second enable should be OK */
8603 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8605 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8607 /* check Symbol is enabled - upped this from 5 as it wasn't always
8608 * catching the update */
8609 for (i
= 0; i
< 10; i
++) {
8612 /* check Dino is enabled bit */
8613 read_nic_byte(dev
, 0x210000, &data
);
8619 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8624 /* Get Symbol alive response */
8625 for (i
= 0; i
< 30; i
++) {
8626 /* Read alive response structure */
8628 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8629 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8631 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8637 printk(KERN_ERR DRV_NAME
8638 ": %s: No response from Symbol - hw not alive\n",
8640 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));