Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

[cris-mirror.git] / drivers / net / wireless / intel / iwlwifi / fw / api / tx.h

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * The full GNU General Public License is included in this distribution
 * in the file called COPYING.
 *
 * Contact Information:
 *  Intel Linux Wireless <linuxwifi@intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#ifndef __iwl_fw_api_tx_h__
#define __iwl_fw_api_tx_h__

/**
 * enum iwl_tx_flags - bitmasks for tx_flags in TX command
 * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
 * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame
 * @TX_CMD_FLG_ACK: expect ACK from receiving station
 * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
 *      Otherwise, use rate_n_flags from the TX command
 * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
 *      Must set TX_CMD_FLG_ACK with this flag.
 * @TX_CMD_FLG_TXOP_PROT: TXOP protection requested
 * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
 * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
 * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
 * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
 *      on old firmwares).
 * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
 * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
 *      Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
 * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
 * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
 *      Should be set for beacons and probe responses
 * @TX_CMD_FLG_CALIB: activate PA TX power calibrations
 * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
 * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
 *      Should be set for 26/30 length MAC headers
 * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
 * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
 * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
 * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
 * @TX_CMD_FLG_EXEC_PAPD: execute PAPD
 * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
 * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
 */
enum iwl_tx_flags {
        TX_CMD_FLG_PROT_REQUIRE         = BIT(0),
        TX_CMD_FLG_WRITE_TX_POWER       = BIT(1),
        TX_CMD_FLG_ACK                  = BIT(3),
        TX_CMD_FLG_STA_RATE             = BIT(4),
        TX_CMD_FLG_BAR                  = BIT(6),
        TX_CMD_FLG_TXOP_PROT            = BIT(7),
        TX_CMD_FLG_VHT_NDPA             = BIT(8),
        TX_CMD_FLG_HT_NDPA              = BIT(9),
        TX_CMD_FLG_CSI_FDBK2HOST        = BIT(10),
        TX_CMD_FLG_BT_PRIO_POS          = 11,
        TX_CMD_FLG_BT_DIS               = BIT(12),
        TX_CMD_FLG_SEQ_CTL              = BIT(13),
        TX_CMD_FLG_MORE_FRAG            = BIT(14),
        TX_CMD_FLG_TSF                  = BIT(16),
        TX_CMD_FLG_CALIB                = BIT(17),
        TX_CMD_FLG_KEEP_SEQ_CTL         = BIT(18),
        TX_CMD_FLG_MH_PAD               = BIT(20),
        TX_CMD_FLG_RESP_TO_DRV          = BIT(21),
        TX_CMD_FLG_TKIP_MIC_DONE        = BIT(23),
        TX_CMD_FLG_DUR                  = BIT(25),
        TX_CMD_FLG_FW_DROP              = BIT(26),
        TX_CMD_FLG_EXEC_PAPD            = BIT(27),
        TX_CMD_FLG_PAPD_TYPE            = BIT(28),
        TX_CMD_FLG_HCCA_CHUNK           = BIT(31)
}; /* TX_FLAGS_BITS_API_S_VER_1 */

/**
 * enum iwl_tx_cmd_flags - bitmasks for tx_flags in TX command for 22000
 * @IWL_TX_FLAGS_CMD_RATE: use rate from the TX command
 * @IWL_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs
 *      to a secured STA
 * @IWL_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate
 *      selection, retry limits and BT kill
 */
enum iwl_tx_cmd_flags {
        IWL_TX_FLAGS_CMD_RATE           = BIT(0),
        IWL_TX_FLAGS_ENCRYPT_DIS        = BIT(1),
        IWL_TX_FLAGS_HIGH_PRI           = BIT(2),
}; /* TX_FLAGS_BITS_API_S_VER_3 */

/**
 * enum iwl_tx_pm_timeouts - pm timeout values in TX command
 * @PM_FRAME_NONE: no need to suspend sleep mode
 * @PM_FRAME_MGMT: fw suspend sleep mode for 100TU
 * @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
 */
enum iwl_tx_pm_timeouts {
        PM_FRAME_NONE           = 0,
        PM_FRAME_MGMT           = 2,
        PM_FRAME_ASSOC          = 3,
};

#define TX_CMD_SEC_MSK                  0x07
#define TX_CMD_SEC_WEP_KEY_IDX_POS      6
#define TX_CMD_SEC_WEP_KEY_IDX_MSK      0xc0

/**
 * enum iwl_tx_cmd_sec_ctrl - bitmasks for security control in TX command
 * @TX_CMD_SEC_WEP: WEP encryption algorithm.
 * @TX_CMD_SEC_CCM: CCM encryption algorithm.
 * @TX_CMD_SEC_TKIP: TKIP encryption algorithm.
 * @TX_CMD_SEC_EXT: extended cipher algorithm.
 * @TX_CMD_SEC_GCMP: GCMP encryption algorithm.
 * @TX_CMD_SEC_KEY128: set for 104 bits WEP key.
 * @TX_CMD_SEC_KEY_FROM_TABLE: for a non-WEP key, set if the key should be taken
 *      from the table instead of from the TX command.
 *      If the key is taken from the key table its index should be given by the
 *      first byte of the TX command key field.
 */
enum iwl_tx_cmd_sec_ctrl {
        TX_CMD_SEC_WEP                  = 0x01,
        TX_CMD_SEC_CCM                  = 0x02,
        TX_CMD_SEC_TKIP                 = 0x03,
        TX_CMD_SEC_EXT                  = 0x04,
        TX_CMD_SEC_GCMP                 = 0x05,
        TX_CMD_SEC_KEY128               = 0x08,
        TX_CMD_SEC_KEY_FROM_TABLE       = 0x10,
};

/*
 * TX command Frame life time in us - to be written in pm_frame_timeout
 */
#define TX_CMD_LIFE_TIME_INFINITE       0xFFFFFFFF
#define TX_CMD_LIFE_TIME_DEFAULT        2000000 /* 2000 ms*/
#define TX_CMD_LIFE_TIME_PROBE_RESP     40000 /* 40 ms */
#define TX_CMD_LIFE_TIME_EXPIRED_FRAME  0

/*
 * TID for non QoS frames - to be written in tid_tspec
 */
#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT

/*
 * Limits on the retransmissions - to be written in {data,rts}_retry_limit
 */
#define IWL_DEFAULT_TX_RETRY                    15
#define IWL_MGMT_DFAULT_RETRY_LIMIT             3
#define IWL_RTS_DFAULT_RETRY_LIMIT              60
#define IWL_BAR_DFAULT_RETRY_LIMIT              60
#define IWL_LOW_RETRY_LIMIT                     7

/**
 * enum iwl_tx_offload_assist_flags_pos -  set %iwl_tx_cmd offload_assist values
 * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
 *      from mac header end. For normal case it is 4 words for SNAP.
 *      note: tx_cmd, mac header and pad are not counted in the offset.
 *      This is used to help the offload in case there is tunneling such as
 *      IPv6 in IPv4, in such case the ip header offset should point to the
 *      inner ip header and IPv4 checksum of the external header should be
 *      calculated by driver.
 * @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum
 * @TX_CMD_OFFLD_L3_EN: enable IP header checksum
 * @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV
 *      field. Doesn't include the pad.
 * @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for
 *      alignment
 * @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU
 */
enum iwl_tx_offload_assist_flags_pos {
        TX_CMD_OFFLD_IP_HDR =           0,
        TX_CMD_OFFLD_L4_EN =            6,
        TX_CMD_OFFLD_L3_EN =            7,
        TX_CMD_OFFLD_MH_SIZE =          8,
        TX_CMD_OFFLD_PAD =              13,
        TX_CMD_OFFLD_AMSDU =            14,
};

#define IWL_TX_CMD_OFFLD_MH_MASK        0x1f
#define IWL_TX_CMD_OFFLD_IP_HDR_MASK    0x3f

/* TODO: complete documentation for try_cnt and btkill_cnt */
/**
 * struct iwl_tx_cmd - TX command struct to FW
 * ( TX_CMD = 0x1c )
 * @len: in bytes of the payload, see below for details
 * @offload_assist: TX offload configuration
 * @tx_flags: combination of TX_CMD_FLG_*
 * @scratch: scratch buffer used by the device
 * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
 *      cleared. Combination of RATE_MCS_*
 * @sta_id: index of destination station in FW station table
 * @sec_ctl: security control, TX_CMD_SEC_*
 * @initial_rate_index: index into the the rate table for initial TX attempt.
 *      Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
 * @reserved2: reserved
 * @key: security key
 * @reserved3: reserved
 * @life_time: frame life time (usecs??)
 * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
 *      btkill_cnd + reserved), first 32 bits. "0" disables usage.
 * @dram_msb_ptr: upper bits of the scratch physical address
 * @rts_retry_limit: max attempts for RTS
 * @data_retry_limit: max attempts to send the data packet
 * @tid_tspec: TID/tspec
 * @pm_frame_timeout: PM TX frame timeout
 * @reserved4: reserved
 * @payload: payload (same as @hdr)
 * @hdr: 802.11 header (same as @payload)
 *
 * The byte count (both len and next_frame_len) includes MAC header
 * (24/26/30/32 bytes)
 * + 2 bytes pad if 26/30 header size
 * + 8 byte IV for CCM or TKIP (not used for WEP)
 * + Data payload
 * + 8-byte MIC (not used for CCM/WEP)
 * It does not include post-MAC padding, i.e.,
 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
 * Range of len: 14-2342 bytes.
 *
 * After the struct fields the MAC header is placed, plus any padding,
 * and then the actial payload.
 */
struct iwl_tx_cmd {
        __le16 len;
        __le16 offload_assist;
        __le32 tx_flags;
        struct {
                u8 try_cnt;
                u8 btkill_cnt;
                __le16 reserved;
        } scratch; /* DRAM_SCRATCH_API_U_VER_1 */
        __le32 rate_n_flags;
        u8 sta_id;
        u8 sec_ctl;
        u8 initial_rate_index;
        u8 reserved2;
        u8 key[16];
        __le32 reserved3;
        __le32 life_time;
        __le32 dram_lsb_ptr;
        u8 dram_msb_ptr;
        u8 rts_retry_limit;
        u8 data_retry_limit;
        u8 tid_tspec;
        __le16 pm_frame_timeout;
        __le16 reserved4;
        u8 payload[0];
        struct ieee80211_hdr hdr[0];
} __packed; /* TX_CMD_API_S_VER_6 */

struct iwl_dram_sec_info {
        __le32 pn_low;
        __le16 pn_high;
        __le16 aux_info;
} __packed; /* DRAM_SEC_INFO_API_S_VER_1 */

/**
 * struct iwl_tx_cmd_gen2 - TX command struct to FW for 22000 devices
 * ( TX_CMD = 0x1c )
 * @len: in bytes of the payload, see below for details
 * @offload_assist: TX offload configuration
 * @flags: combination of &enum iwl_tx_cmd_flags
 * @dram_info: FW internal DRAM storage
 * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
 *      cleared. Combination of RATE_MCS_*
 * @hdr: 802.11 header
 */
struct iwl_tx_cmd_gen2 {
        __le16 len;
        __le16 offload_assist;
        __le32 flags;
        struct iwl_dram_sec_info dram_info;
        __le32 rate_n_flags;
        struct ieee80211_hdr hdr[0];
} __packed; /* TX_CMD_API_S_VER_7 */

/*
 * TX response related data
 */

/*
 * enum iwl_tx_status - status that is returned by the fw after attempts to Tx
 * @TX_STATUS_SUCCESS:
 * @TX_STATUS_DIRECT_DONE:
 * @TX_STATUS_POSTPONE_DELAY:
 * @TX_STATUS_POSTPONE_FEW_BYTES:
 * @TX_STATUS_POSTPONE_BT_PRIO:
 * @TX_STATUS_POSTPONE_QUIET_PERIOD:
 * @TX_STATUS_POSTPONE_CALC_TTAK:
 * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
 * @TX_STATUS_FAIL_SHORT_LIMIT:
 * @TX_STATUS_FAIL_LONG_LIMIT:
 * @TX_STATUS_FAIL_UNDERRUN:
 * @TX_STATUS_FAIL_DRAIN_FLOW:
 * @TX_STATUS_FAIL_RFKILL_FLUSH:
 * @TX_STATUS_FAIL_LIFE_EXPIRE:
 * @TX_STATUS_FAIL_DEST_PS:
 * @TX_STATUS_FAIL_HOST_ABORTED:
 * @TX_STATUS_FAIL_BT_RETRY:
 * @TX_STATUS_FAIL_STA_INVALID:
 * @TX_TATUS_FAIL_FRAG_DROPPED:
 * @TX_STATUS_FAIL_TID_DISABLE:
 * @TX_STATUS_FAIL_FIFO_FLUSHED:
 * @TX_STATUS_FAIL_SMALL_CF_POLL:
 * @TX_STATUS_FAIL_FW_DROP:
 * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
 *      STA table
 * @TX_FRAME_STATUS_INTERNAL_ABORT:
 * @TX_MODE_MSK:
 * @TX_MODE_NO_BURST:
 * @TX_MODE_IN_BURST_SEQ:
 * @TX_MODE_FIRST_IN_BURST:
 * @TX_QUEUE_NUM_MSK:
 *
 * Valid only if frame_count =1
 * TODO: complete documentation
 */
enum iwl_tx_status {
        TX_STATUS_MSK = 0x000000ff,
        TX_STATUS_SUCCESS = 0x01,
        TX_STATUS_DIRECT_DONE = 0x02,
        /* postpone TX */
        TX_STATUS_POSTPONE_DELAY = 0x40,
        TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
        TX_STATUS_POSTPONE_BT_PRIO = 0x42,
        TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
        TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
        /* abort TX */
        TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
        TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
        TX_STATUS_FAIL_LONG_LIMIT = 0x83,
        TX_STATUS_FAIL_UNDERRUN = 0x84,
        TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
        TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
        TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
        TX_STATUS_FAIL_DEST_PS = 0x88,
        TX_STATUS_FAIL_HOST_ABORTED = 0x89,
        TX_STATUS_FAIL_BT_RETRY = 0x8a,
        TX_STATUS_FAIL_STA_INVALID = 0x8b,
        TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
        TX_STATUS_FAIL_TID_DISABLE = 0x8d,
        TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
        TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
        TX_STATUS_FAIL_FW_DROP = 0x90,
        TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
        TX_STATUS_INTERNAL_ABORT = 0x92,
        TX_MODE_MSK = 0x00000f00,
        TX_MODE_NO_BURST = 0x00000000,
        TX_MODE_IN_BURST_SEQ = 0x00000100,
        TX_MODE_FIRST_IN_BURST = 0x00000200,
        TX_QUEUE_NUM_MSK = 0x0001f000,
        TX_NARROW_BW_MSK = 0x00060000,
        TX_NARROW_BW_1DIV2 = 0x00020000,
        TX_NARROW_BW_1DIV4 = 0x00040000,
        TX_NARROW_BW_1DIV8 = 0x00060000,
};

/*
 * enum iwl_tx_agg_status - TX aggregation status
 * @AGG_TX_STATE_STATUS_MSK:
 * @AGG_TX_STATE_TRANSMITTED:
 * @AGG_TX_STATE_UNDERRUN:
 * @AGG_TX_STATE_BT_PRIO:
 * @AGG_TX_STATE_FEW_BYTES:
 * @AGG_TX_STATE_ABORT:
 * @AGG_TX_STATE_TX_ON_AIR_DROP: TX_ON_AIR signal drop without underrun or
 *      BT detection
 * @AGG_TX_STATE_LAST_SENT_TRY_CNT:
 * @AGG_TX_STATE_LAST_SENT_BT_KILL:
 * @AGG_TX_STATE_SCD_QUERY:
 * @AGG_TX_STATE_TEST_BAD_CRC32:
 * @AGG_TX_STATE_RESPONSE:
 * @AGG_TX_STATE_DUMP_TX:
 * @AGG_TX_STATE_DELAY_TX:
 * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
 *      occur if tx failed for this frame when it was a member of a previous
 *      aggregation block). If rate scaling is used, retry count indicates the
 *      rate table entry used for all frames in the new agg.
 * @AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
 *      this frame
 *
 * TODO: complete documentation
 */
enum iwl_tx_agg_status {
        AGG_TX_STATE_STATUS_MSK = 0x00fff,
        AGG_TX_STATE_TRANSMITTED = 0x000,
        AGG_TX_STATE_UNDERRUN = 0x001,
        AGG_TX_STATE_BT_PRIO = 0x002,
        AGG_TX_STATE_FEW_BYTES = 0x004,
        AGG_TX_STATE_ABORT = 0x008,
        AGG_TX_STATE_TX_ON_AIR_DROP = 0x010,
        AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
        AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
        AGG_TX_STATE_SCD_QUERY = 0x080,
        AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
        AGG_TX_STATE_RESPONSE = 0x1ff,
        AGG_TX_STATE_DUMP_TX = 0x200,
        AGG_TX_STATE_DELAY_TX = 0x400,
        AGG_TX_STATE_TRY_CNT_POS = 12,
        AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS,
};

/*
 * The mask below describes a status where we are absolutely sure that the MPDU
 * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
 * written the bytes to the TXE, but we know nothing about what the DSP did.
 */
#define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \
                                    AGG_TX_STATE_ABORT | \
                                    AGG_TX_STATE_SCD_QUERY)

/*
 * REPLY_TX = 0x1c (response)
 *
 * This response may be in one of two slightly different formats, indicated
 * by the frame_count field:
 *
 * 1)   No aggregation (frame_count == 1).  This reports Tx results for a single
 *      frame. Multiple attempts, at various bit rates, may have been made for
 *      this frame.
 *
 * 2)   Aggregation (frame_count > 1).  This reports Tx results for two or more
 *      frames that used block-acknowledge.  All frames were transmitted at
 *      same rate. Rate scaling may have been used if first frame in this new
 *      agg block failed in previous agg block(s).
 *
 *      Note that, for aggregation, ACK (block-ack) status is not delivered
 *      here; block-ack has not been received by the time the device records
 *      this status.
 *      This status relates to reasons the tx might have been blocked or aborted
 *      within the device, rather than whether it was received successfully by
 *      the destination station.
 */

/**
 * struct agg_tx_status - per packet TX aggregation status
 * @status: See &enum iwl_tx_agg_status
 * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
 */
struct agg_tx_status {
        __le16 status;
        __le16 sequence;
} __packed;

/*
 * definitions for initial rate index field
 * bits [3:0] initial rate index
 * bits [6:4] rate table color, used for the initial rate
 * bit-7 invalid rate indication
 */
#define TX_RES_INIT_RATE_INDEX_MSK 0x0f
#define TX_RES_RATE_TABLE_COLOR_POS 4
#define TX_RES_RATE_TABLE_COLOR_MSK 0x70
#define TX_RES_INV_RATE_INDEX_MSK 0x80
#define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\
                                       TX_RES_RATE_TABLE_COLOR_POS)

#define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
#define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)

/**
 * struct iwl_mvm_tx_resp_v3 - notifies that fw is TXing a packet
 * ( REPLY_TX = 0x1c )
 * @frame_count: 1 no aggregation, >1 aggregation
 * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
 * @failure_rts: num of failures due to unsuccessful RTS
 * @failure_frame: num failures due to no ACK (unused for agg)
 * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
 *      Tx of all the batch. RATE_MCS_*
 * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
 *      for agg: RTS + CTS + aggregation tx time + block-ack time.
 *      in usec.
 * @pa_status: tx power info
 * @pa_integ_res_a: tx power info
 * @pa_integ_res_b: tx power info
 * @pa_integ_res_c: tx power info
 * @measurement_req_id: tx power info
 * @reduced_tpc: transmit power reduction used
 * @reserved: reserved
 * @tfd_info: TFD information set by the FH
 * @seq_ctl: sequence control from the Tx cmd
 * @byte_cnt: byte count from the Tx cmd
 * @tlc_info: TLC rate info
 * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
 * @frame_ctrl: frame control
 * @status: for non-agg:  frame status TX_STATUS_*
 *      for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
 *      follow this one, up to frame_count. Length in @frame_count.
 *
 * After the array of statuses comes the SSN of the SCD. Look at
 * %iwl_mvm_get_scd_ssn for more details.
 */
struct iwl_mvm_tx_resp_v3 {
        u8 frame_count;
        u8 bt_kill_count;
        u8 failure_rts;
        u8 failure_frame;
        __le32 initial_rate;
        __le16 wireless_media_time;

        u8 pa_status;
        u8 pa_integ_res_a[3];
        u8 pa_integ_res_b[3];
        u8 pa_integ_res_c[3];
        __le16 measurement_req_id;
        u8 reduced_tpc;
        u8 reserved;

        __le32 tfd_info;
        __le16 seq_ctl;
        __le16 byte_cnt;
        u8 tlc_info;
        u8 ra_tid;
        __le16 frame_ctrl;
        struct agg_tx_status status[];
} __packed; /* TX_RSP_API_S_VER_3 */

/**
 * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet
 * ( REPLY_TX = 0x1c )
 * @frame_count: 1 no aggregation, >1 aggregation
 * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
 * @failure_rts: num of failures due to unsuccessful RTS
 * @failure_frame: num failures due to no ACK (unused for agg)
 * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
 *      Tx of all the batch. RATE_MCS_*
 * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
 *      for agg: RTS + CTS + aggregation tx time + block-ack time.
 *      in usec.
 * @pa_status: tx power info
 * @pa_integ_res_a: tx power info
 * @pa_integ_res_b: tx power info
 * @pa_integ_res_c: tx power info
 * @measurement_req_id: tx power info
 * @reduced_tpc: transmit power reduction used
 * @reserved: reserved
 * @tfd_info: TFD information set by the FH
 * @seq_ctl: sequence control from the Tx cmd
 * @byte_cnt: byte count from the Tx cmd
 * @tlc_info: TLC rate info
 * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
 * @frame_ctrl: frame control
 * @tx_queue: TX queue for this response
 * @reserved2: reserved for padding/alignment
 * @status: for non-agg:  frame status TX_STATUS_*
 *      For version 6 TX response isn't received for aggregation at all.
 *
 * After the array of statuses comes the SSN of the SCD. Look at
 * %iwl_mvm_get_scd_ssn for more details.
 */
struct iwl_mvm_tx_resp {
        u8 frame_count;
        u8 bt_kill_count;
        u8 failure_rts;
        u8 failure_frame;
        __le32 initial_rate;
        __le16 wireless_media_time;

        u8 pa_status;
        u8 pa_integ_res_a[3];
        u8 pa_integ_res_b[3];
        u8 pa_integ_res_c[3];
        __le16 measurement_req_id;
        u8 reduced_tpc;
        u8 reserved;

        __le32 tfd_info;
        __le16 seq_ctl;
        __le16 byte_cnt;
        u8 tlc_info;
        u8 ra_tid;
        __le16 frame_ctrl;
        __le16 tx_queue;
        __le16 reserved2;
        struct agg_tx_status status;
} __packed; /* TX_RSP_API_S_VER_6 */

/**
 * struct iwl_mvm_ba_notif - notifies about reception of BA
 * ( BA_NOTIF = 0xc5 )
 * @sta_addr: MAC address
 * @reserved: reserved
 * @sta_id: Index of recipient (BA-sending) station in fw's station table
 * @tid: tid of the session
 * @seq_ctl: sequence control field
 * @bitmap: the bitmap of the BA notification as seen in the air
 * @scd_flow: the tx queue this BA relates to
 * @scd_ssn: the index of the last contiguously sent packet
 * @txed: number of Txed frames in this batch
 * @txed_2_done: number of Acked frames in this batch
 * @reduced_txp: power reduced according to TPC. This is the actual value and
 *      not a copy from the LQ command. Thus, if not the first rate was used
 *      for Tx-ing then this value will be set to 0 by FW.
 * @reserved1: reserved
 */
struct iwl_mvm_ba_notif {
        u8 sta_addr[ETH_ALEN];
        __le16 reserved;

        u8 sta_id;
        u8 tid;
        __le16 seq_ctl;
        __le64 bitmap;
        __le16 scd_flow;
        __le16 scd_ssn;
        u8 txed;
        u8 txed_2_done;
        u8 reduced_txp;
        u8 reserved1;
} __packed;

/**
 * struct iwl_mvm_compressed_ba_tfd - progress of a TFD queue
 * @q_num: TFD queue number
 * @tfd_index: Index of first un-acked frame in the  TFD queue
 * @scd_queue: For debug only - the physical queue the TFD queue is bound to
 * @tid: TID of the queue (0-7)
 * @reserved: reserved for alignment
 */
struct iwl_mvm_compressed_ba_tfd {
        __le16 q_num;
        __le16 tfd_index;
        u8 scd_queue;
        u8 tid;
        u8 reserved[2];
} __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */

/**
 * struct iwl_mvm_compressed_ba_ratid - progress of a RA TID queue
 * @q_num: RA TID queue number
 * @tid: TID of the queue
 * @ssn: BA window current SSN
 */
struct iwl_mvm_compressed_ba_ratid {
        u8 q_num;
        u8 tid;
        __le16 ssn;
} __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */

/*
 * enum iwl_mvm_ba_resp_flags - TX aggregation status
 * @IWL_MVM_BA_RESP_TX_AGG: generated due to BA
 * @IWL_MVM_BA_RESP_TX_BAR: generated due to BA after BAR
 * @IWL_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA
 * @IWL_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun
 * @IWL_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill
 * @IWL_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the
 *      expected time
 */
enum iwl_mvm_ba_resp_flags {
        IWL_MVM_BA_RESP_TX_AGG,
        IWL_MVM_BA_RESP_TX_BAR,
        IWL_MVM_BA_RESP_TX_AGG_FAIL,
        IWL_MVM_BA_RESP_TX_UNDERRUN,
        IWL_MVM_BA_RESP_TX_BT_KILL,
        IWL_MVM_BA_RESP_TX_DSP_TIMEOUT
};

/**
 * struct iwl_mvm_compressed_ba_notif - notifies about reception of BA
 * ( BA_NOTIF = 0xc5 )
 * @flags: status flag, see the &iwl_mvm_ba_resp_flags
 * @sta_id: Index of recipient (BA-sending) station in fw's station table
 * @reduced_txp: power reduced according to TPC. This is the actual value and
 *      not a copy from the LQ command. Thus, if not the first rate was used
 *      for Tx-ing then this value will be set to 0 by FW.
 * @tlc_rate_info: TLC rate info, initial rate index, TLC table color
 * @retry_cnt: retry count
 * @query_byte_cnt: SCD query byte count
 * @query_frame_cnt: SCD query frame count
 * @txed: number of frames sent in the aggregation (all-TIDs)
 * @done: number of frames that were Acked by the BA (all-TIDs)
 * @reserved: reserved (for alignment)
 * @wireless_time: Wireless-media time
 * @tx_rate: the rate the aggregation was sent at
 * @tfd_cnt: number of TFD-Q elements
 * @ra_tid_cnt: number of RATID-Q elements
 * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
 *      for details.
 * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
 *      &iwl_mvm_compressed_ba_ratid for more details.
 */
struct iwl_mvm_compressed_ba_notif {
        __le32 flags;
        u8 sta_id;
        u8 reduced_txp;
        u8 tlc_rate_info;
        u8 retry_cnt;
        __le32 query_byte_cnt;
        __le16 query_frame_cnt;
        __le16 txed;
        __le16 done;
        __le16 reserved;
        __le32 wireless_time;
        __le32 tx_rate;
        __le16 tfd_cnt;
        __le16 ra_tid_cnt;
        struct iwl_mvm_compressed_ba_tfd tfd[1];
        struct iwl_mvm_compressed_ba_ratid ra_tid[0];
} __packed; /* COMPRESSED_BA_RES_API_S_VER_4 */

/**
 * struct iwl_mac_beacon_cmd_v6 - beacon template command
 * @tx: the tx commands associated with the beacon frame
 * @template_id: currently equal to the mac context id of the coresponding
 *  mac.
 * @tim_idx: the offset of the tim IE in the beacon
 * @tim_size: the length of the tim IE
 * @frame: the template of the beacon frame
 */
struct iwl_mac_beacon_cmd_v6 {
        struct iwl_tx_cmd tx;
        __le32 template_id;
        __le32 tim_idx;
        __le32 tim_size;
        struct ieee80211_hdr frame[0];
} __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_6 */

/**
 * struct iwl_mac_beacon_cmd_v7 - beacon template command with offloaded CSA
 * @tx: the tx commands associated with the beacon frame
 * @template_id: currently equal to the mac context id of the coresponding
 *  mac.
 * @tim_idx: the offset of the tim IE in the beacon
 * @tim_size: the length of the tim IE
 * @ecsa_offset: offset to the ECSA IE if present
 * @csa_offset: offset to the CSA IE if present
 * @frame: the template of the beacon frame
 */
struct iwl_mac_beacon_cmd_v7 {
        struct iwl_tx_cmd tx;
        __le32 template_id;
        __le32 tim_idx;
        __le32 tim_size;
        __le32 ecsa_offset;
        __le32 csa_offset;
        struct ieee80211_hdr frame[0];
} __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_7 */

enum iwl_mac_beacon_flags {
        IWL_MAC_BEACON_CCK      = BIT(8),
        IWL_MAC_BEACON_ANT_A    = BIT(9),
        IWL_MAC_BEACON_ANT_B    = BIT(10),
        IWL_MAC_BEACON_ANT_C    = BIT(11),
};

/**
 * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
 * @byte_cnt: byte count of the beacon frame.
 * @flags: least significant byte for rate code. The most significant byte
 *      is &enum iwl_mac_beacon_flags.
 * @reserved: reserved
 * @template_id: currently equal to the mac context id of the coresponding mac.
 * @tim_idx: the offset of the tim IE in the beacon
 * @tim_size: the length of the tim IE
 * @ecsa_offset: offset to the ECSA IE if present
 * @csa_offset: offset to the CSA IE if present
 * @frame: the template of the beacon frame
 */
struct iwl_mac_beacon_cmd {
        __le16 byte_cnt;
        __le16 flags;
        __le64 reserved;
        __le32 template_id;
        __le32 tim_idx;
        __le32 tim_size;
        __le32 ecsa_offset;
        __le32 csa_offset;
        struct ieee80211_hdr frame[0];
} __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_9 */

struct iwl_beacon_notif {
        struct iwl_mvm_tx_resp beacon_notify_hdr;
        __le64 tsf;
        __le32 ibss_mgr_status;
} __packed;

/**
 * struct iwl_extended_beacon_notif - notifies about beacon transmission
 * @beacon_notify_hdr: tx response command associated with the beacon
 * @tsf: last beacon tsf
 * @ibss_mgr_status: whether IBSS is manager
 * @gp2: last beacon time in gp2
 */
struct iwl_extended_beacon_notif {
        struct iwl_mvm_tx_resp beacon_notify_hdr;
        __le64 tsf;
        __le32 ibss_mgr_status;
        __le32 gp2;
} __packed; /* BEACON_NTFY_API_S_VER_5 */

/**
 * enum iwl_dump_control - dump (flush) control flags
 * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
 *      and the TFD queues are empty.
 */
enum iwl_dump_control {
        DUMP_TX_FIFO_FLUSH      = BIT(1),
};

/**
 * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
 * @queues_ctl: bitmap of queues to flush
 * @flush_ctl: control flags
 * @reserved: reserved
 */
struct iwl_tx_path_flush_cmd_v1 {
        __le32 queues_ctl;
        __le16 flush_ctl;
        __le16 reserved;
} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */

/**
 * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
 * @sta_id: station ID to flush
 * @tid_mask: TID mask to flush
 * @reserved: reserved
 */
struct iwl_tx_path_flush_cmd {
        __le32 sta_id;
        __le16 tid_mask;
        __le16 reserved;
} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */

/* Available options for the SCD_QUEUE_CFG HCMD */
enum iwl_scd_cfg_actions {
        SCD_CFG_DISABLE_QUEUE           = 0x0,
        SCD_CFG_ENABLE_QUEUE            = 0x1,
        SCD_CFG_UPDATE_QUEUE_TID        = 0x2,
};

/**
 * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
 * @token: unused
 * @sta_id: station id
 * @tid: TID
 * @scd_queue: scheduler queue to confiug
 * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
 *      Value is one of &enum iwl_scd_cfg_actions options
 * @aggregate: 1 aggregated queue, 0 otherwise
 * @tx_fifo: &enum iwl_mvm_tx_fifo
 * @window: BA window size
 * @ssn: SSN for the BA agreement
 * @reserved: reserved
 */
struct iwl_scd_txq_cfg_cmd {
        u8 token;
        u8 sta_id;
        u8 tid;
        u8 scd_queue;
        u8 action;
        u8 aggregate;
        u8 tx_fifo;
        u8 window;
        __le16 ssn;
        __le16 reserved;
} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */

/**
 * struct iwl_scd_txq_cfg_rsp
 * @token: taken from the command
 * @sta_id: station id from the command
 * @tid: tid from the command
 * @scd_queue: scd_queue from the command
 */
struct iwl_scd_txq_cfg_rsp {
        u8 token;
        u8 sta_id;
        u8 tid;
        u8 scd_queue;
} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */

#endif /* __iwl_fw_api_tx_h__ */