2 * linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
4 * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
5 * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
6 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
7 * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
9 * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
12 #include <linux/config.h>
13 #include <linux/module.h>
14 #include <linux/types.h>
15 #include <linux/kernel.h>
16 #include <linux/timer.h>
18 #include <linux/ioport.h>
19 #include <linux/interrupt.h>
20 #include <linux/blkdev.h>
21 #include <linux/hdreg.h>
22 #include <linux/pci.h>
23 #include <linux/delay.h>
24 #include <linux/ide.h>
25 #include <linux/init.h>
30 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
31 * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
32 * which use the integrated NS87514 cell for CD-ROM support.
33 * i.e we have to support for CD-ROM installs.
34 * See drivers/parisc/superio.c for more gory details.
36 #include <asm/superio.h>
38 static unsigned long superio_ide_status
[2];
39 static unsigned long superio_ide_select
[2];
40 static unsigned long superio_ide_dma_status
[2];
42 #define SUPERIO_IDE_MAX_RETRIES 25
44 /* Because of a defect in Super I/O, all reads of the PCI DMA status
45 * registers, IDE status register and the IDE select register need to be
48 static u8
superio_ide_inb (unsigned long port
)
50 if (port
== superio_ide_status
[0] ||
51 port
== superio_ide_status
[1] ||
52 port
== superio_ide_select
[0] ||
53 port
== superio_ide_select
[1] ||
54 port
== superio_ide_dma_status
[0] ||
55 port
== superio_ide_dma_status
[1]) {
57 int retries
= SUPERIO_IDE_MAX_RETRIES
;
59 /* printk(" [ reading port 0x%x with retry ] ", port); */
65 } while (tmp
== 0 && retries
-- > 0);
73 static void __devinit
superio_ide_init_iops (struct hwif_s
*hwif
)
77 struct pci_dev
*pdev
= hwif
->pci_dev
;
78 u8 port
= hwif
->channel
;
80 base
= pci_resource_start(pdev
, port
* 2) & ~3;
81 dmabase
= pci_resource_start(pdev
, 4) & ~3;
83 superio_ide_status
[port
] = base
+ IDE_STATUS_OFFSET
;
84 superio_ide_select
[port
] = base
+ IDE_SELECT_OFFSET
;
85 superio_ide_dma_status
[port
] = dmabase
+ (!port
? 2 : 0xa);
87 /* Clear error/interrupt, enable dma */
88 tmp
= superio_ide_inb(superio_ide_dma_status
[port
]);
89 outb(tmp
| 0x66, superio_ide_dma_status
[port
]);
91 /* We need to override inb to workaround a SuperIO errata */
92 hwif
->INB
= superio_ide_inb
;
95 static void __devinit
init_iops_ns87415(ide_hwif_t
*hwif
)
97 if (PCI_SLOT(hwif
->pci_dev
->devfn
) == 0xE) {
98 /* Built-in - assume it's under superio. */
99 superio_ide_init_iops(hwif
);
104 static unsigned int ns87415_count
= 0, ns87415_control
[MAX_HWIFS
] = { 0 };
107 * This routine either enables/disables (according to drive->present)
108 * the IRQ associated with the port (HWIF(drive)),
109 * and selects either PIO or DMA handshaking for the next I/O operation.
111 static void ns87415_prepare_drive (ide_drive_t
*drive
, unsigned int use_dma
)
113 ide_hwif_t
*hwif
= HWIF(drive
);
114 unsigned int bit
, other
, new, *old
= (unsigned int *) hwif
->select_data
;
115 struct pci_dev
*dev
= hwif
->pci_dev
;
118 local_irq_save(flags
);
121 /* Adjust IRQ enable bit */
122 bit
= 1 << (8 + hwif
->channel
);
123 new = drive
->present
? (new & ~bit
) : (new | bit
);
125 /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
126 bit
= 1 << (20 + drive
->select
.b
.unit
+ (hwif
->channel
<< 1));
127 other
= 1 << (20 + (1 - drive
->select
.b
.unit
) + (hwif
->channel
<< 1));
128 new = use_dma
? ((new & ~other
) | bit
) : (new & ~bit
);
134 * Don't change DMA engine settings while Write Buffers
137 (void) pci_read_config_byte(dev
, 0x43, &stat
);
138 while (stat
& 0x03) {
140 (void) pci_read_config_byte(dev
, 0x43, &stat
);
144 (void) pci_write_config_dword(dev
, 0x40, new);
147 * And let things settle...
152 local_irq_restore(flags
);
155 static void ns87415_selectproc (ide_drive_t
*drive
)
157 ns87415_prepare_drive (drive
, drive
->using_dma
);
160 static int ns87415_ide_dma_end (ide_drive_t
*drive
)
162 ide_hwif_t
*hwif
= HWIF(drive
);
163 u8 dma_stat
= 0, dma_cmd
= 0;
165 drive
->waiting_for_dma
= 0;
166 dma_stat
= hwif
->INB(hwif
->dma_status
);
167 /* get dma command mode */
168 dma_cmd
= hwif
->INB(hwif
->dma_command
);
170 hwif
->OUTB(dma_cmd
& ~1, hwif
->dma_command
);
171 /* from ERRATA: clear the INTR & ERROR bits */
172 dma_cmd
= hwif
->INB(hwif
->dma_command
);
173 hwif
->OUTB(dma_cmd
|6, hwif
->dma_command
);
174 /* and free any DMA resources */
175 ide_destroy_dmatable(drive
);
176 /* verify good DMA status */
177 return (dma_stat
& 7) != 4;
180 static int ns87415_ide_dma_setup(ide_drive_t
*drive
)
182 /* select DMA xfer */
183 ns87415_prepare_drive(drive
, 1);
184 if (!ide_dma_setup(drive
))
186 /* DMA failed: select PIO xfer */
187 ns87415_prepare_drive(drive
, 0);
191 static int ns87415_ide_dma_check (ide_drive_t
*drive
)
193 if (drive
->media
!= ide_disk
)
194 return HWIF(drive
)->ide_dma_off_quietly(drive
);
195 return __ide_dma_check(drive
);
198 static void __init
init_hwif_ns87415 (ide_hwif_t
*hwif
)
200 struct pci_dev
*dev
= hwif
->pci_dev
;
201 unsigned int ctrl
, using_inta
;
209 hwif
->selectproc
= &ns87415_selectproc
;
212 * We cannot probe for IRQ: both ports share common IRQ on INTA.
213 * Also, leave IRQ masked during drive probing, to prevent infinite
214 * interrupts from a potentially floating INTA..
216 * IRQs get unmasked in selectproc when drive is first used.
218 (void) pci_read_config_dword(dev
, 0x40, &ctrl
);
219 (void) pci_read_config_byte(dev
, 0x09, &progif
);
220 /* is irq in "native" mode? */
221 using_inta
= progif
& (1 << (hwif
->channel
<< 1));
223 using_inta
= ctrl
& (1 << (4 + hwif
->channel
));
225 hwif
->select_data
= hwif
->mate
->select_data
;
227 hwif
->select_data
= (unsigned long)
228 &ns87415_control
[ns87415_count
++];
229 ctrl
|= (1 << 8) | (1 << 9); /* mask both IRQs */
231 ctrl
&= ~(1 << 6); /* unmask INTA */
232 *((unsigned int *)hwif
->select_data
) = ctrl
;
233 (void) pci_write_config_dword(dev
, 0x40, ctrl
);
236 * Set prefetch size to 512 bytes for both ports,
237 * but don't turn on/off prefetching here.
239 pci_write_config_byte(dev
, 0x55, 0xee);
243 * XXX: Reset the device, if we don't it will not respond
244 * to SELECT_DRIVE() properly during first probe_hwif().
247 hwif
->OUTB(12, hwif
->io_ports
[IDE_CONTROL_OFFSET
]);
249 hwif
->OUTB(8, hwif
->io_ports
[IDE_CONTROL_OFFSET
]);
252 stat
= hwif
->INB(hwif
->io_ports
[IDE_STATUS_OFFSET
]);
255 } while ((stat
& BUSY_STAT
) && --timeout
);
260 hwif
->irq
= ide_default_irq(hwif
->io_ports
[IDE_DATA_OFFSET
]);
261 else if (!hwif
->irq
&& hwif
->mate
&& hwif
->mate
->irq
)
262 hwif
->irq
= hwif
->mate
->irq
; /* share IRQ with mate */
267 hwif
->OUTB(0x60, hwif
->dma_status
);
268 hwif
->dma_setup
= &ns87415_ide_dma_setup
;
269 hwif
->ide_dma_check
= &ns87415_ide_dma_check
;
270 hwif
->ide_dma_end
= &ns87415_ide_dma_end
;
274 hwif
->drives
[0].autodma
= hwif
->autodma
;
275 hwif
->drives
[1].autodma
= hwif
->autodma
;
278 static ide_pci_device_t ns87415_chipset __devinitdata
= {
280 #ifdef CONFIG_SUPERIO
281 .init_iops
= init_iops_ns87415
,
283 .init_hwif
= init_hwif_ns87415
,
286 .bootable
= ON_BOARD
,
289 static int __devinit
ns87415_init_one(struct pci_dev
*dev
, const struct pci_device_id
*id
)
291 return ide_setup_pci_device(dev
, &ns87415_chipset
);
294 static struct pci_device_id ns87415_pci_tbl
[] = {
295 { PCI_VENDOR_ID_NS
, PCI_DEVICE_ID_NS_87415
, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
298 MODULE_DEVICE_TABLE(pci
, ns87415_pci_tbl
);
300 static struct pci_driver driver
= {
301 .name
= "NS87415_IDE",
302 .id_table
= ns87415_pci_tbl
,
303 .probe
= ns87415_init_one
,
306 static int ns87415_ide_init(void)
308 return ide_pci_register_driver(&driver
);
311 module_init(ns87415_ide_init
);
313 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
314 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
315 MODULE_LICENSE("GPL");