drivers/video/dnfb.c

   1 #include <linux/kernel.h>
   2 #include <linux/errno.h>
   3 #include <linux/string.h>
   4 #include <linux/mm.h>
   5 #include <linux/tty.h>
   6 #include <linux/slab.h>
   7 #include <linux/delay.h>
   8 #include <linux/interrupt.h>
   9 #include <asm/setup.h>
  10 #include <asm/system.h>
  11 #include <asm/irq.h>
  12 #include <asm/amigahw.h>
  13 #include <asm/amigaints.h>
  14 #include <asm/apollohw.h>
  15 #include <linux/fb.h>
  16 #include <linux/module.h>
  17
  18 /* apollo video HW definitions */
  19
  20 /*
  21  * Control Registers.   IOBASE + $x
  22  *
  23  * Note: these are the Memory/IO BASE definitions for a mono card set to the
  24  * alternate address
  25  *
  26  * Control 3A and 3B serve identical functions except that 3A
  27  * deals with control 1 and 3b deals with Color LUT reg.
  28  */
  29
  30 #define AP_IOBASE       0x3b0   /* Base address of 1 plane board. */
  31 #define AP_STATUS       isaIO2mem(AP_IOBASE+0)  /* Status register.  Read */
  32 #define AP_WRITE_ENABLE isaIO2mem(AP_IOBASE+0)  /* Write Enable Register Write */
  33 #define AP_DEVICE_ID    isaIO2mem(AP_IOBASE+1)  /* Device ID Register. Read */
  34 #define AP_ROP_1        isaIO2mem(AP_IOBASE+2)  /* Raster Operation reg. Write Word */
  35 #define AP_DIAG_MEM_REQ isaIO2mem(AP_IOBASE+4)  /* Diagnostic Memory Request. Write Word */
  36 #define AP_CONTROL_0    isaIO2mem(AP_IOBASE+8)  /* Control Register 0.  Read/Write */
  37 #define AP_CONTROL_1    isaIO2mem(AP_IOBASE+0xa)        /* Control Register 1.  Read/Write */
  38 #define AP_CONTROL_3A   isaIO2mem(AP_IOBASE+0xe)        /* Control Register 3a. Read/Write */
  39 #define AP_CONTROL_2    isaIO2mem(AP_IOBASE+0xc)        /* Control Register 2. Read/Write */
  40
  41
  42 #define FRAME_BUFFER_START 0x0FA0000
  43 #define FRAME_BUFFER_LEN 0x40000
  44
  45 /* CREG 0 */
  46 #define VECTOR_MODE 0x40        /* 010x.xxxx */
  47 #define DBLT_MODE   0x80        /* 100x.xxxx */
  48 #define NORMAL_MODE 0xE0        /* 111x.xxxx */
  49 #define SHIFT_BITS  0x1F        /* xxx1.1111 */
  50         /* other bits are Shift value */
  51
  52 /* CREG 1 */
  53 #define AD_BLT      0x80        /* 1xxx.xxxx */
  54 #define NORMAL      0x80 /* 1xxx.xxxx */        /* What is happening here ?? */
  55 #define INVERSE     0x00 /* 0xxx.xxxx */        /* Clearing this reverses the screen */
  56 #define PIX_BLT     0x00        /* 0xxx.xxxx */
  57
  58 #define AD_HIBIT        0x40    /* xIxx.xxxx */
  59
  60 #define ROP_EN          0x10    /* xxx1.xxxx */
  61 #define DST_EQ_SRC      0x00    /* xxx0.xxxx */
  62 #define nRESET_SYNC     0x08    /* xxxx.1xxx */
  63 #define SYNC_ENAB       0x02    /* xxxx.xx1x */
  64
  65 #define BLANK_DISP      0x00    /* xxxx.xxx0 */
  66 #define ENAB_DISP       0x01    /* xxxx.xxx1 */
  67
  68 #define NORM_CREG1      (nRESET_SYNC | SYNC_ENAB | ENAB_DISP)   /* no reset sync */
  69
  70 /* CREG 2 */
  71
  72 /*
  73  * Following 3 defines are common to 1, 4 and 8 plane.
  74  */
  75
  76 #define S_DATA_1s   0x00 /* 00xx.xxxx */        /* set source to all 1's -- vector drawing */
  77 #define S_DATA_PIX  0x40 /* 01xx.xxxx */        /* takes source from ls-bits and replicates over 16 bits */
  78 #define S_DATA_PLN  0xC0 /* 11xx.xxxx */        /* normal, each data access =16-bits in
  79                                                    one plane of image mem */
  80
  81 /* CREG 3A/CREG 3B */
  82 #       define RESET_CREG 0x80  /* 1000.0000 */
  83
  84 /* ROP REG  -  all one nibble */
  85 /*      ********* NOTE : this is used r0,r1,r2,r3 *********** */
  86 #define ROP(r2,r3,r0,r1) ( (U_SHORT)((r0)|((r1)<<4)|((r2)<<8)|((r3)<<12)) )
  87 #define DEST_ZERO               0x0
  88 #define SRC_AND_DEST    0x1
  89 #define SRC_AND_nDEST   0x2
  90 #define SRC                             0x3
  91 #define nSRC_AND_DEST   0x4
  92 #define DEST                    0x5
  93 #define SRC_XOR_DEST    0x6
  94 #define SRC_OR_DEST             0x7
  95 #define SRC_NOR_DEST    0x8
  96 #define SRC_XNOR_DEST   0x9
  97 #define nDEST                   0xA
  98 #define SRC_OR_nDEST    0xB
  99 #define nSRC                    0xC
 100 #define nSRC_OR_DEST    0xD
 101 #define SRC_NAND_DEST   0xE
 102 #define DEST_ONE                0xF
 103
 104 #define SWAP(A) ((A>>8) | ((A&0xff) <<8))
 105
 106 /* frame buffer operations */
 107
 108 static int dnfb_blank(int blank, struct fb_info *info);
 109 static void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
 110
 111 static struct fb_ops dn_fb_ops = {
 112         .owner          = THIS_MODULE,
 113         .fb_blank       = dnfb_blank,
 114         .fb_fillrect    = cfb_fillrect,
 115         .fb_copyarea    = dnfb_copyarea,
 116         .fb_imageblit   = cfb_imageblit,
 117         .fb_cursor      = soft_cursor,
 118 };
 119
 120 struct fb_var_screeninfo dnfb_var __devinitdata = {
 121         .xres           = 1280,
 122         .yres           = 1024,
 123         .xres_virtual   = 2048,
 124         .yres_virtual   = 1024,
 125         .bits_per_pixel = 1,
 126         .height         = -1,
 127         .width          = -1,
 128         .vmode          = FB_VMODE_NONINTERLACED,
 129 };
 130
 131 static struct fb_fix_screeninfo dnfb_fix __devinitdata = {
 132         .id             = "Apollo Mono",
 133         .smem_start     = (FRAME_BUFFER_START + IO_BASE),
 134         .smem_len       = FRAME_BUFFER_LEN,
 135         .type           = FB_TYPE_PACKED_PIXELS,
 136         .visual         = FB_VISUAL_MONO10,
 137         .line_length    = 256,
 138 };
 139
 140 static int dnfb_blank(int blank, struct fb_info *info)
 141 {
 142         if (blank)
 143                 out_8(AP_CONTROL_3A, 0x0);
 144         else
 145                 out_8(AP_CONTROL_3A, 0x1);
 146         return 0;
 147 }
 148
 149 static
 150 void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 151 {
 152
 153         int incr, y_delta, pre_read = 0, x_end, x_word_count;
 154         uint start_mask, end_mask, dest;
 155         ushort *src, dummy;
 156         short i, j;
 157
 158         incr = (area->dy <= area->sy) ? 1 : -1;
 159
 160         src = (ushort *)(info->screen_base + area->sy * info->fix.line_length +
 161                         (area->sx >> 4));
 162         dest = area->dy * (info->fix.line_length >> 1) + (area->dx >> 4);
 163
 164         if (incr > 0) {
 165                 y_delta = (info->fix.line_length * 8) - area->sx - area->width;
 166                 x_end = area->dx + area->width - 1;
 167                 x_word_count = (x_end >> 4) - (area->dx >> 4) + 1;
 168                 start_mask = 0xffff0000 >> (area->dx & 0xf);
 169                 end_mask = 0x7ffff >> (x_end & 0xf);
 170                 out_8(AP_CONTROL_0,
 171                      (((area->dx & 0xf) - (area->sx & 0xf)) % 16) | (0x4 << 5));
 172                 if ((area->dx & 0xf) < (area->sx & 0xf))
 173                         pre_read = 1;
 174         } else {
 175                 y_delta = -((info->fix.line_length * 8) - area->sx - area->width);
 176                 x_end = area->dx - area->width + 1;
 177                 x_word_count = (area->dx >> 4) - (x_end >> 4) + 1;
 178                 start_mask = 0x7ffff >> (area->dx & 0xf);
 179                 end_mask = 0xffff0000 >> (x_end & 0xf);
 180                 out_8(AP_CONTROL_0,
 181                      ((-((area->sx & 0xf) - (area->dx & 0xf))) % 16) |
 182                      (0x4 << 5));
 183                 if ((area->dx & 0xf) > (area->sx & 0xf))
 184                         pre_read = 1;
 185         }
 186
 187         for (i = 0; i < area->height; i++) {
 188
 189                 out_8(AP_CONTROL_3A, 0xc | (dest >> 16));
 190
 191                 if (pre_read) {
 192                         dummy = *src;
 193                         src += incr;
 194                 }
 195
 196                 if (x_word_count) {
 197                         out_8(AP_WRITE_ENABLE, start_mask);
 198                         *src = dest;
 199                         src += incr;
 200                         dest += incr;
 201                         out_8(AP_WRITE_ENABLE, 0);
 202
 203                         for (j = 1; j < (x_word_count - 1); j++) {
 204                                 *src = dest;
 205                                 src += incr;
 206                                 dest += incr;
 207                         }
 208
 209                         out_8(AP_WRITE_ENABLE, start_mask);
 210                         *src = dest;
 211                         dest += incr;
 212                         src += incr;
 213                 } else {
 214                         out_8(AP_WRITE_ENABLE, start_mask | end_mask);
 215                         *src = dest;
 216                         dest += incr;
 217                         src += incr;
 218                 }
 219                 src += (y_delta / 16);
 220                 dest += (y_delta / 16);
 221         }
 222         out_8(AP_CONTROL_0, NORMAL_MODE);
 223 }
 224
 225 /*
 226  * Initialization
 227  */
 228
 229 static int __devinit dnfb_probe(struct device *device)
 230 {
 231         struct platform_device *dev = to_platform_device(device);
 232         struct fb_info *info;
 233         int err = 0;
 234
 235         info = framebuffer_alloc(0, &dev->dev);
 236         if (!info)
 237                 return -ENOMEM;
 238
 239         info->fbops = &dn_fb_ops;
 240         info->fix = dnfb_fix;
 241         info->var = dnfb_var;
 242         info->var.red.length = 1;
 243         info->var.red.offset = 0;
 244         info->var.green = info->var.blue = info->var.red;
 245         info->screen_base = (u_char *) info->fix.smem_start;
 246
 247         err = fb_alloc_cmap(&info->cmap, 2, 0);
 248         if (err < 0) {
 249                 framebuffer_release(info);
 250                 return err;
 251         }
 252
 253         err = register_framebuffer(info);
 254         if (err < 0) {
 255                 fb_dealloc_cmap(&info->cmap);
 256                 framebuffer_release(info);
 257                 return err;
 258         }
 259         dev_set_drvdata(&dev->dev, info);
 260
 261         /* now we have registered we can safely setup the hardware */
 262         out_8(AP_CONTROL_3A, RESET_CREG);
 263         out_be16(AP_WRITE_ENABLE, 0x0);
 264         out_8(AP_CONTROL_0, NORMAL_MODE);
 265         out_8(AP_CONTROL_1, (AD_BLT | DST_EQ_SRC | NORM_CREG1));
 266         out_8(AP_CONTROL_2, S_DATA_PLN);
 267         out_be16(AP_ROP_1, SWAP(0x3));
 268
 269         printk("apollo frame buffer alive and kicking !\n");
 270         return err;
 271 }
 272
 273 static struct device_driver dnfb_driver = {
 274         .name   = "dnfb",
 275         .bus    = &platform_bus_type,
 276         .probe  = dnfb_probe,
 277 };
 278
 279 static struct platform_device dnfb_device = {
 280         .name   = "dnfb",
 281 };
 282
 283 int __init dnfb_init(void)
 284 {
 285         int ret;
 286
 287         if (fb_get_options("dnfb", NULL))
 288                 return -ENODEV;
 289
 290         ret = driver_register(&dnfb_driver);
 291
 292         if (!ret) {
 293                 ret = platform_device_register(&dnfb_device);
 294                 if (ret)
 295                         driver_unregister(&dnfb_driver);
 296         }
 297         return ret;
 298 }
 299
 300 module_init(dnfb_init);
 301
 302 MODULE_LICENSE("GPL");