1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
6 #include <linux/module.h>
7 #include <linux/kernel.h>
8 #include <linux/delay.h>
9 #include <linux/errno.h>
10 #include <linux/i2c.h>
13 #include <linux/types.h>
14 #include <linux/interrupt.h>
15 #include <linux/jiffies.h>
16 #include <linux/pci.h>
17 #include <linux/mutex.h>
18 #include <linux/ktime.h>
19 #include <linux/slab.h>
21 #define PCH_EVENT_SET 0 /* I2C Interrupt Event Set Status */
22 #define PCH_EVENT_NONE 1 /* I2C Interrupt Event Clear Status */
23 #define PCH_MAX_CLK 100000 /* Maximum Clock speed in MHz */
24 #define PCH_BUFFER_MODE_ENABLE 0x0002 /* flag for Buffer mode enable */
25 #define PCH_EEPROM_SW_RST_MODE_ENABLE 0x0008 /* EEPROM SW RST enable flag */
27 #define PCH_I2CSADR 0x00 /* I2C slave address register */
28 #define PCH_I2CCTL 0x04 /* I2C control register */
29 #define PCH_I2CSR 0x08 /* I2C status register */
30 #define PCH_I2CDR 0x0C /* I2C data register */
31 #define PCH_I2CMON 0x10 /* I2C bus monitor register */
32 #define PCH_I2CBC 0x14 /* I2C bus transfer rate setup counter */
33 #define PCH_I2CMOD 0x18 /* I2C mode register */
34 #define PCH_I2CBUFSLV 0x1C /* I2C buffer mode slave address register */
35 #define PCH_I2CBUFSUB 0x20 /* I2C buffer mode subaddress register */
36 #define PCH_I2CBUFFOR 0x24 /* I2C buffer mode format register */
37 #define PCH_I2CBUFCTL 0x28 /* I2C buffer mode control register */
38 #define PCH_I2CBUFMSK 0x2C /* I2C buffer mode interrupt mask register */
39 #define PCH_I2CBUFSTA 0x30 /* I2C buffer mode status register */
40 #define PCH_I2CBUFLEV 0x34 /* I2C buffer mode level register */
41 #define PCH_I2CESRFOR 0x38 /* EEPROM software reset mode format register */
42 #define PCH_I2CESRCTL 0x3C /* EEPROM software reset mode ctrl register */
43 #define PCH_I2CESRMSK 0x40 /* EEPROM software reset mode */
44 #define PCH_I2CESRSTA 0x44 /* EEPROM software reset mode status register */
45 #define PCH_I2CTMR 0x48 /* I2C timer register */
46 #define PCH_I2CSRST 0xFC /* I2C reset register */
47 #define PCH_I2CNF 0xF8 /* I2C noise filter register */
49 #define BUS_IDLE_TIMEOUT 20
50 #define PCH_I2CCTL_I2CMEN 0x0080
51 #define TEN_BIT_ADDR_DEFAULT 0xF000
52 #define TEN_BIT_ADDR_MASK 0xF0
53 #define PCH_START 0x0020
54 #define PCH_RESTART 0x0004
55 #define PCH_ESR_START 0x0001
56 #define PCH_BUFF_START 0x1
57 #define PCH_REPSTART 0x0004
58 #define PCH_ACK 0x0008
59 #define PCH_GETACK 0x0001
62 #define I2CMCF_BIT 0x0080
63 #define I2CMIF_BIT 0x0002
64 #define I2CMAL_BIT 0x0010
65 #define I2CBMFI_BIT 0x0001
66 #define I2CBMAL_BIT 0x0002
67 #define I2CBMNA_BIT 0x0004
68 #define I2CBMTO_BIT 0x0008
69 #define I2CBMIS_BIT 0x0010
70 #define I2CESRFI_BIT 0X0001
71 #define I2CESRTO_BIT 0x0002
72 #define I2CESRFIIE_BIT 0x1
73 #define I2CESRTOIE_BIT 0x2
74 #define I2CBMDZ_BIT 0x0040
75 #define I2CBMAG_BIT 0x0020
76 #define I2CMBB_BIT 0x0020
77 #define BUFFER_MODE_MASK (I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \
78 I2CBMTO_BIT | I2CBMIS_BIT)
79 #define I2C_ADDR_MSK 0xFF
80 #define I2C_MSB_2B_MSK 0x300
81 #define FAST_MODE_CLK 400
82 #define FAST_MODE_EN 0x0001
83 #define SUB_ADDR_LEN_MAX 4
84 #define BUF_LEN_MAX 32
85 #define PCH_BUFFER_MODE 0x1
86 #define EEPROM_SW_RST_MODE 0x0002
87 #define NORMAL_INTR_ENBL 0x0300
88 #define EEPROM_RST_INTR_ENBL (I2CESRFIIE_BIT | I2CESRTOIE_BIT)
89 #define EEPROM_RST_INTR_DISBL 0x0
90 #define BUFFER_MODE_INTR_ENBL 0x001F
91 #define BUFFER_MODE_INTR_DISBL 0x0
92 #define NORMAL_MODE 0x0
93 #define BUFFER_MODE 0x1
94 #define EEPROM_SR_MODE 0x2
95 #define I2C_TX_MODE 0x0010
96 #define PCH_BUF_TX 0xFFF7
97 #define PCH_BUF_RD 0x0008
98 #define I2C_ERROR_MASK (I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \
99 I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT)
100 #define I2CMAL_EVENT 0x0001
101 #define I2CMCF_EVENT 0x0002
102 #define I2CBMFI_EVENT 0x0004
103 #define I2CBMAL_EVENT 0x0008
104 #define I2CBMNA_EVENT 0x0010
105 #define I2CBMTO_EVENT 0x0020
106 #define I2CBMIS_EVENT 0x0040
107 #define I2CESRFI_EVENT 0x0080
108 #define I2CESRTO_EVENT 0x0100
109 #define PCI_DEVICE_ID_PCH_I2C 0x8817
111 #define pch_dbg(adap, fmt, arg...) \
112 dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
114 #define pch_err(adap, fmt, arg...) \
115 dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
117 #define pch_pci_err(pdev, fmt, arg...) \
118 dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg)
120 #define pch_pci_dbg(pdev, fmt, arg...) \
121 dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
124 Set the number of I2C instance max
125 Intel EG20T PCH : 1ch
126 LAPIS Semiconductor ML7213 IOH : 2ch
127 LAPIS Semiconductor ML7831 IOH : 1ch
129 #define PCH_I2C_MAX_DEV 2
132 * struct i2c_algo_pch_data - for I2C driver functionalities
133 * @pch_adapter: stores the reference to i2c_adapter structure
134 * @p_adapter_info: stores the reference to adapter_info structure
135 * @pch_base_address: specifies the remapped base address
136 * @pch_buff_mode_en: specifies if buffer mode is enabled
137 * @pch_event_flag: specifies occurrence of interrupt events
138 * @pch_i2c_xfer_in_progress: specifies whether the transfer is completed
140 struct i2c_algo_pch_data
{
141 struct i2c_adapter pch_adapter
;
142 struct adapter_info
*p_adapter_info
;
143 void __iomem
*pch_base_address
;
144 int pch_buff_mode_en
;
146 bool pch_i2c_xfer_in_progress
;
150 * struct adapter_info - This structure holds the adapter information for the
152 * @pch_data: stores a list of i2c_algo_pch_data
153 * @pch_i2c_suspended: specifies whether the system is suspended or not
154 * perhaps with more lines and words.
155 * @ch_num: specifies the number of i2c instance
157 * pch_data has as many elements as maximum I2C channels
159 struct adapter_info
{
160 struct i2c_algo_pch_data pch_data
[PCH_I2C_MAX_DEV
];
161 bool pch_i2c_suspended
;
166 static int pch_i2c_speed
= 100; /* I2C bus speed in Kbps */
167 static int pch_clk
= 50000; /* specifies I2C clock speed in KHz */
168 static wait_queue_head_t pch_event
;
169 static DEFINE_MUTEX(pch_mutex
);
171 /* Definition for ML7213 by LAPIS Semiconductor */
172 #define PCI_DEVICE_ID_ML7213_I2C 0x802D
173 #define PCI_DEVICE_ID_ML7223_I2C 0x8010
174 #define PCI_DEVICE_ID_ML7831_I2C 0x8817
176 static const struct pci_device_id pch_pcidev_id
[] = {
177 { PCI_VDEVICE(INTEL
, PCI_DEVICE_ID_PCH_I2C
), 1, },
178 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7213_I2C
), 2, },
179 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7223_I2C
), 1, },
180 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7831_I2C
), 1, },
183 MODULE_DEVICE_TABLE(pci
, pch_pcidev_id
);
185 static irqreturn_t
pch_i2c_handler(int irq
, void *pData
);
187 static inline void pch_setbit(void __iomem
*addr
, u32 offset
, u32 bitmask
)
190 val
= ioread32(addr
+ offset
);
192 iowrite32(val
, addr
+ offset
);
195 static inline void pch_clrbit(void __iomem
*addr
, u32 offset
, u32 bitmask
)
198 val
= ioread32(addr
+ offset
);
200 iowrite32(val
, addr
+ offset
);
204 * pch_i2c_init() - hardware initialization of I2C module
205 * @adap: Pointer to struct i2c_algo_pch_data.
207 static void pch_i2c_init(struct i2c_algo_pch_data
*adap
)
209 void __iomem
*p
= adap
->pch_base_address
;
214 /* reset I2C controller */
215 iowrite32(0x01, p
+ PCH_I2CSRST
);
217 iowrite32(0x0, p
+ PCH_I2CSRST
);
219 /* Initialize I2C registers */
220 iowrite32(0x21, p
+ PCH_I2CNF
);
222 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_I2CCTL_I2CMEN
);
224 if (pch_i2c_speed
!= 400)
227 reg_value
= PCH_I2CCTL_I2CMEN
;
228 if (pch_i2c_speed
== FAST_MODE_CLK
) {
229 reg_value
|= FAST_MODE_EN
;
230 pch_dbg(adap
, "Fast mode enabled\n");
233 if (pch_clk
> PCH_MAX_CLK
)
236 pch_i2cbc
= (pch_clk
+ (pch_i2c_speed
* 4)) / (pch_i2c_speed
* 8);
237 /* Set transfer speed in I2CBC */
238 iowrite32(pch_i2cbc
, p
+ PCH_I2CBC
);
240 pch_i2ctmr
= (pch_clk
) / 8;
241 iowrite32(pch_i2ctmr
, p
+ PCH_I2CTMR
);
243 reg_value
|= NORMAL_INTR_ENBL
; /* Enable interrupts in normal mode */
244 iowrite32(reg_value
, p
+ PCH_I2CCTL
);
247 "I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n",
248 ioread32(p
+ PCH_I2CCTL
), pch_i2cbc
, pch_i2ctmr
);
250 init_waitqueue_head(&pch_event
);
254 * pch_i2c_wait_for_bus_idle() - check the status of bus.
255 * @adap: Pointer to struct i2c_algo_pch_data.
256 * @timeout: waiting time counter (ms).
258 static s32
pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data
*adap
,
261 void __iomem
*p
= adap
->pch_base_address
;
263 unsigned long end
= jiffies
+ msecs_to_jiffies(timeout
);
265 while (ioread32(p
+ PCH_I2CSR
) & I2CMBB_BIT
) {
266 if (time_after(jiffies
, end
)) {
267 pch_dbg(adap
, "I2CSR = %x\n", ioread32(p
+ PCH_I2CSR
));
268 pch_err(adap
, "%s: Timeout Error.return%d\n",
276 /* Retry after some usecs */
279 /* Wait a bit more without consuming CPU */
280 usleep_range(20, 1000);
289 * pch_i2c_start() - Generate I2C start condition in normal mode.
290 * @adap: Pointer to struct i2c_algo_pch_data.
292 * Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1.
294 static void pch_i2c_start(struct i2c_algo_pch_data
*adap
)
296 void __iomem
*p
= adap
->pch_base_address
;
297 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
298 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_START
);
302 * pch_i2c_stop() - generate stop condition in normal mode.
303 * @adap: Pointer to struct i2c_algo_pch_data.
305 static void pch_i2c_stop(struct i2c_algo_pch_data
*adap
)
307 void __iomem
*p
= adap
->pch_base_address
;
308 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
309 /* clear the start bit */
310 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_START
);
313 static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data
*adap
)
316 void __iomem
*p
= adap
->pch_base_address
;
318 ret
= wait_event_timeout(pch_event
,
319 (adap
->pch_event_flag
!= 0), msecs_to_jiffies(1000));
321 pch_err(adap
, "%s:wait-event timeout\n", __func__
);
322 adap
->pch_event_flag
= 0;
328 if (adap
->pch_event_flag
& I2C_ERROR_MASK
) {
329 pch_err(adap
, "Lost Arbitration\n");
330 adap
->pch_event_flag
= 0;
331 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMAL_BIT
);
332 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMIF_BIT
);
337 adap
->pch_event_flag
= 0;
339 if (ioread32(p
+ PCH_I2CSR
) & PCH_GETACK
) {
340 pch_dbg(adap
, "Receive NACK for slave address setting\n");
348 * pch_i2c_repstart() - generate repeated start condition in normal mode
349 * @adap: Pointer to struct i2c_algo_pch_data.
351 static void pch_i2c_repstart(struct i2c_algo_pch_data
*adap
)
353 void __iomem
*p
= adap
->pch_base_address
;
354 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
355 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_REPSTART
);
359 * pch_i2c_writebytes() - write data to I2C bus in normal mode
360 * @i2c_adap: Pointer to the struct i2c_adapter.
361 * @msgs: Pointer to the i2c message structure.
362 * @last: specifies whether last message or not.
363 * In the case of compound mode it will be 1 for last message,
365 * @first: specifies whether first message or not.
366 * 1 for first message otherwise 0.
368 static s32
pch_i2c_writebytes(struct i2c_adapter
*i2c_adap
,
369 struct i2c_msg
*msgs
, u32 last
, u32 first
)
371 struct i2c_algo_pch_data
*adap
= i2c_adap
->algo_data
;
379 void __iomem
*p
= adap
->pch_base_address
;
385 /* enable master tx */
386 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, I2C_TX_MODE
);
388 pch_dbg(adap
, "I2CCTL = %x msgs->len = %d\n", ioread32(p
+ PCH_I2CCTL
),
392 if (pch_i2c_wait_for_bus_idle(adap
, BUS_IDLE_TIMEOUT
) == -ETIME
)
396 if (msgs
->flags
& I2C_M_TEN
) {
397 addr_2_msb
= ((addr
& I2C_MSB_2B_MSK
) >> 7) & 0x06;
398 iowrite32(addr_2_msb
| TEN_BIT_ADDR_MASK
, p
+ PCH_I2CDR
);
402 rtn
= pch_i2c_wait_for_check_xfer(adap
);
406 addr_8_lsb
= (addr
& I2C_ADDR_MSK
);
407 iowrite32(addr_8_lsb
, p
+ PCH_I2CDR
);
409 /* set 7 bit slave address and R/W bit as 0 */
410 iowrite32(i2c_8bit_addr_from_msg(msgs
), p
+ PCH_I2CDR
);
415 rtn
= pch_i2c_wait_for_check_xfer(adap
);
419 for (wrcount
= 0; wrcount
< length
; ++wrcount
) {
420 /* write buffer value to I2C data register */
421 iowrite32(buf
[wrcount
], p
+ PCH_I2CDR
);
422 pch_dbg(adap
, "writing %x to Data register\n", buf
[wrcount
]);
424 rtn
= pch_i2c_wait_for_check_xfer(adap
);
428 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMCF_BIT
);
429 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMIF_BIT
);
432 /* check if this is the last message */
436 pch_i2c_repstart(adap
);
438 pch_dbg(adap
, "return=%d\n", wrcount
);
444 * pch_i2c_sendack() - send ACK
445 * @adap: Pointer to struct i2c_algo_pch_data.
447 static void pch_i2c_sendack(struct i2c_algo_pch_data
*adap
)
449 void __iomem
*p
= adap
->pch_base_address
;
450 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
451 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_ACK
);
455 * pch_i2c_sendnack() - send NACK
456 * @adap: Pointer to struct i2c_algo_pch_data.
458 static void pch_i2c_sendnack(struct i2c_algo_pch_data
*adap
)
460 void __iomem
*p
= adap
->pch_base_address
;
461 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
462 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_ACK
);
466 * pch_i2c_restart() - Generate I2C restart condition in normal mode.
467 * @adap: Pointer to struct i2c_algo_pch_data.
469 * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
471 static void pch_i2c_restart(struct i2c_algo_pch_data
*adap
)
473 void __iomem
*p
= adap
->pch_base_address
;
474 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
475 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_RESTART
);
479 * pch_i2c_readbytes() - read data from I2C bus in normal mode.
480 * @i2c_adap: Pointer to the struct i2c_adapter.
481 * @msgs: Pointer to i2c_msg structure.
482 * @last: specifies whether last message or not.
483 * @first: specifies whether first message or not.
485 static s32
pch_i2c_readbytes(struct i2c_adapter
*i2c_adap
, struct i2c_msg
*msgs
,
488 struct i2c_algo_pch_data
*adap
= i2c_adap
->algo_data
;
496 void __iomem
*p
= adap
->pch_base_address
;
503 /* enable master reception */
504 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, I2C_TX_MODE
);
507 if (pch_i2c_wait_for_bus_idle(adap
, BUS_IDLE_TIMEOUT
) == -ETIME
)
511 if (msgs
->flags
& I2C_M_TEN
) {
512 addr_2_msb
= ((addr
& I2C_MSB_2B_MSK
) >> 7);
513 iowrite32(addr_2_msb
| TEN_BIT_ADDR_MASK
, p
+ PCH_I2CDR
);
517 rtn
= pch_i2c_wait_for_check_xfer(adap
);
521 addr_8_lsb
= (addr
& I2C_ADDR_MSK
);
522 iowrite32(addr_8_lsb
, p
+ PCH_I2CDR
);
524 pch_i2c_restart(adap
);
526 rtn
= pch_i2c_wait_for_check_xfer(adap
);
530 addr_2_msb
|= I2C_RD
;
531 iowrite32(addr_2_msb
| TEN_BIT_ADDR_MASK
, p
+ PCH_I2CDR
);
533 /* 7 address bits + R/W bit */
534 iowrite32(i2c_8bit_addr_from_msg(msgs
), p
+ PCH_I2CDR
);
537 /* check if it is the first message */
541 rtn
= pch_i2c_wait_for_check_xfer(adap
);
547 ioread32(p
+ PCH_I2CDR
); /* Dummy read needs */
553 pch_i2c_sendack(adap
);
556 for (loop
= 1, read_index
= 0; loop
< length
; loop
++) {
557 buf
[read_index
] = ioread32(p
+ PCH_I2CDR
);
562 rtn
= pch_i2c_wait_for_check_xfer(adap
);
567 pch_i2c_sendnack(adap
);
569 buf
[read_index
] = ioread32(p
+ PCH_I2CDR
); /* Read final - 1 */
574 rtn
= pch_i2c_wait_for_check_xfer(adap
);
581 pch_i2c_repstart(adap
);
583 buf
[read_index
++] = ioread32(p
+ PCH_I2CDR
); /* Read Final */
591 * pch_i2c_cb() - Interrupt handler Call back function
592 * @adap: Pointer to struct i2c_algo_pch_data.
594 static void pch_i2c_cb(struct i2c_algo_pch_data
*adap
)
597 void __iomem
*p
= adap
->pch_base_address
;
599 sts
= ioread32(p
+ PCH_I2CSR
);
600 sts
&= (I2CMAL_BIT
| I2CMCF_BIT
| I2CMIF_BIT
);
601 if (sts
& I2CMAL_BIT
)
602 adap
->pch_event_flag
|= I2CMAL_EVENT
;
604 if (sts
& I2CMCF_BIT
)
605 adap
->pch_event_flag
|= I2CMCF_EVENT
;
607 /* clear the applicable bits */
608 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, sts
);
610 pch_dbg(adap
, "PCH_I2CSR = %x\n", ioread32(p
+ PCH_I2CSR
));
616 * pch_i2c_handler() - interrupt handler for the PCH I2C controller
618 * @pData: cookie passed back to the handler function.
620 static irqreturn_t
pch_i2c_handler(int irq
, void *pData
)
625 struct adapter_info
*adap_info
= pData
;
629 for (i
= 0, flag
= 0; i
< adap_info
->ch_num
; i
++) {
630 p
= adap_info
->pch_data
[i
].pch_base_address
;
631 mode
= ioread32(p
+ PCH_I2CMOD
);
632 mode
&= BUFFER_MODE
| EEPROM_SR_MODE
;
633 if (mode
!= NORMAL_MODE
) {
634 pch_err(adap_info
->pch_data
,
635 "I2C-%d mode(%d) is not supported\n", mode
, i
);
638 reg_val
= ioread32(p
+ PCH_I2CSR
);
639 if (reg_val
& (I2CMAL_BIT
| I2CMCF_BIT
| I2CMIF_BIT
)) {
640 pch_i2c_cb(&adap_info
->pch_data
[i
]);
645 return flag
? IRQ_HANDLED
: IRQ_NONE
;
649 * pch_i2c_xfer() - Reading adnd writing data through I2C bus
650 * @i2c_adap: Pointer to the struct i2c_adapter.
651 * @msgs: Pointer to i2c_msg structure.
652 * @num: number of messages.
654 static s32
pch_i2c_xfer(struct i2c_adapter
*i2c_adap
,
655 struct i2c_msg
*msgs
, s32 num
)
657 struct i2c_msg
*pmsg
;
662 struct i2c_algo_pch_data
*adap
= i2c_adap
->algo_data
;
664 ret
= mutex_lock_interruptible(&pch_mutex
);
668 if (adap
->p_adapter_info
->pch_i2c_suspended
) {
669 mutex_unlock(&pch_mutex
);
673 pch_dbg(adap
, "adap->p_adapter_info->pch_i2c_suspended is %d\n",
674 adap
->p_adapter_info
->pch_i2c_suspended
);
675 /* transfer not completed */
676 adap
->pch_i2c_xfer_in_progress
= true;
678 for (i
= 0; i
< num
&& ret
>= 0; i
++) {
680 pmsg
->flags
|= adap
->pch_buff_mode_en
;
681 status
= pmsg
->flags
;
683 "After invoking I2C_MODE_SEL :flag= 0x%x\n", status
);
685 if ((status
& (I2C_M_RD
)) != false) {
686 ret
= pch_i2c_readbytes(i2c_adap
, pmsg
, (i
+ 1 == num
),
689 ret
= pch_i2c_writebytes(i2c_adap
, pmsg
, (i
+ 1 == num
),
694 adap
->pch_i2c_xfer_in_progress
= false; /* transfer completed */
696 mutex_unlock(&pch_mutex
);
698 return (ret
< 0) ? ret
: num
;
702 * pch_i2c_func() - return the functionality of the I2C driver
703 * @adap: Pointer to struct i2c_algo_pch_data.
705 static u32
pch_i2c_func(struct i2c_adapter
*adap
)
707 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
| I2C_FUNC_10BIT_ADDR
;
710 static const struct i2c_algorithm pch_algorithm
= {
711 .master_xfer
= pch_i2c_xfer
,
712 .functionality
= pch_i2c_func
716 * pch_i2c_disbl_int() - Disable PCH I2C interrupts
717 * @adap: Pointer to struct i2c_algo_pch_data.
719 static void pch_i2c_disbl_int(struct i2c_algo_pch_data
*adap
)
721 void __iomem
*p
= adap
->pch_base_address
;
723 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, NORMAL_INTR_ENBL
);
725 iowrite32(EEPROM_RST_INTR_DISBL
, p
+ PCH_I2CESRMSK
);
727 iowrite32(BUFFER_MODE_INTR_DISBL
, p
+ PCH_I2CBUFMSK
);
730 static int pch_i2c_probe(struct pci_dev
*pdev
,
731 const struct pci_device_id
*id
)
733 void __iomem
*base_addr
;
736 struct adapter_info
*adap_info
;
737 struct i2c_adapter
*pch_adap
;
739 pch_pci_dbg(pdev
, "Entered.\n");
741 adap_info
= kzalloc((sizeof(struct adapter_info
)), GFP_KERNEL
);
742 if (adap_info
== NULL
)
745 ret
= pci_enable_device(pdev
);
747 pch_pci_err(pdev
, "pci_enable_device FAILED\n");
751 ret
= pci_request_regions(pdev
, KBUILD_MODNAME
);
753 pch_pci_err(pdev
, "pci_request_regions FAILED\n");
757 base_addr
= pci_iomap(pdev
, 1, 0);
759 if (base_addr
== NULL
) {
760 pch_pci_err(pdev
, "pci_iomap FAILED\n");
765 /* Set the number of I2C channel instance */
766 adap_info
->ch_num
= id
->driver_data
;
768 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
769 pch_adap
= &adap_info
->pch_data
[i
].pch_adapter
;
770 adap_info
->pch_i2c_suspended
= false;
772 adap_info
->pch_data
[i
].p_adapter_info
= adap_info
;
774 pch_adap
->owner
= THIS_MODULE
;
775 pch_adap
->class = I2C_CLASS_HWMON
;
776 strscpy(pch_adap
->name
, KBUILD_MODNAME
, sizeof(pch_adap
->name
));
777 pch_adap
->algo
= &pch_algorithm
;
778 pch_adap
->algo_data
= &adap_info
->pch_data
[i
];
780 /* base_addr + offset; */
781 adap_info
->pch_data
[i
].pch_base_address
= base_addr
+ 0x100 * i
;
783 pch_adap
->dev
.of_node
= pdev
->dev
.of_node
;
784 pch_adap
->dev
.parent
= &pdev
->dev
;
787 ret
= request_irq(pdev
->irq
, pch_i2c_handler
, IRQF_SHARED
,
788 KBUILD_MODNAME
, adap_info
);
790 pch_pci_err(pdev
, "request_irq FAILED\n");
791 goto err_request_irq
;
794 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
795 pch_adap
= &adap_info
->pch_data
[i
].pch_adapter
;
797 pch_i2c_init(&adap_info
->pch_data
[i
]);
800 ret
= i2c_add_numbered_adapter(pch_adap
);
802 pch_pci_err(pdev
, "i2c_add_adapter[ch:%d] FAILED\n", i
);
803 goto err_add_adapter
;
807 pci_set_drvdata(pdev
, adap_info
);
808 pch_pci_dbg(pdev
, "returns %d.\n", ret
);
812 for (j
= 0; j
< i
; j
++)
813 i2c_del_adapter(&adap_info
->pch_data
[j
].pch_adapter
);
814 free_irq(pdev
->irq
, adap_info
);
816 pci_iounmap(pdev
, base_addr
);
818 pci_release_regions(pdev
);
820 pci_disable_device(pdev
);
826 static void pch_i2c_remove(struct pci_dev
*pdev
)
829 struct adapter_info
*adap_info
= pci_get_drvdata(pdev
);
831 free_irq(pdev
->irq
, adap_info
);
833 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
834 pch_i2c_disbl_int(&adap_info
->pch_data
[i
]);
835 i2c_del_adapter(&adap_info
->pch_data
[i
].pch_adapter
);
838 if (adap_info
->pch_data
[0].pch_base_address
)
839 pci_iounmap(pdev
, adap_info
->pch_data
[0].pch_base_address
);
841 for (i
= 0; i
< adap_info
->ch_num
; i
++)
842 adap_info
->pch_data
[i
].pch_base_address
= NULL
;
844 pci_release_regions(pdev
);
846 pci_disable_device(pdev
);
850 static int __maybe_unused
pch_i2c_suspend(struct device
*dev
)
853 struct pci_dev
*pdev
= to_pci_dev(dev
);
854 struct adapter_info
*adap_info
= pci_get_drvdata(pdev
);
855 void __iomem
*p
= adap_info
->pch_data
[0].pch_base_address
;
857 adap_info
->pch_i2c_suspended
= true;
859 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
860 while ((adap_info
->pch_data
[i
].pch_i2c_xfer_in_progress
)) {
861 /* Wait until all channel transfers are completed */
866 /* Disable the i2c interrupts */
867 for (i
= 0; i
< adap_info
->ch_num
; i
++)
868 pch_i2c_disbl_int(&adap_info
->pch_data
[i
]);
870 pch_pci_dbg(pdev
, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
871 "invoked function pch_i2c_disbl_int successfully\n",
872 ioread32(p
+ PCH_I2CSR
), ioread32(p
+ PCH_I2CBUFSTA
),
873 ioread32(p
+ PCH_I2CESRSTA
));
878 static int __maybe_unused
pch_i2c_resume(struct device
*dev
)
881 struct adapter_info
*adap_info
= dev_get_drvdata(dev
);
883 for (i
= 0; i
< adap_info
->ch_num
; i
++)
884 pch_i2c_init(&adap_info
->pch_data
[i
]);
886 adap_info
->pch_i2c_suspended
= false;
891 static SIMPLE_DEV_PM_OPS(pch_i2c_pm_ops
, pch_i2c_suspend
, pch_i2c_resume
);
893 static struct pci_driver pch_pcidriver
= {
894 .name
= KBUILD_MODNAME
,
895 .id_table
= pch_pcidev_id
,
896 .probe
= pch_i2c_probe
,
897 .remove
= pch_i2c_remove
,
898 .driver
.pm
= &pch_i2c_pm_ops
,
901 module_pci_driver(pch_pcidriver
);
903 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
904 MODULE_LICENSE("GPL");
905 MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
906 module_param(pch_i2c_speed
, int, (S_IRUSR
| S_IWUSR
));
907 module_param(pch_clk
, int, (S_IRUSR
| S_IWUSR
));