drivers/scsi/zorro7xx.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
   4  *              Amiga MacroSystemUS WarpEngine SCSI controller.
   5  *              Amiga Technologies/DKB A4091 SCSI controller.
   6  *
   7  * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
   8  * plus modifications of the 53c7xx.c driver to support the Amiga.
   9  *
  10  * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org>
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/init.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/zorro.h>
  17 #include <linux/slab.h>
  18
  19 #include <asm/amigahw.h>
  20 #include <asm/amigaints.h>
  21
  22 #include <scsi/scsi_host.h>
  23 #include <scsi/scsi_transport_spi.h>
  24
  25 #include "53c700.h"
  26
  27 MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>");
  28 MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver");
  29 MODULE_LICENSE("GPL");
  30
  31
  32 static struct scsi_host_template zorro7xx_scsi_driver_template = {
  33         .proc_name      = "zorro7xx",
  34         .this_id        = 7,
  35         .module         = THIS_MODULE,
  36 };
  37
  38 static struct zorro_driver_data {
  39         const char *name;
  40         unsigned long offset;
  41         int absolute;   /* offset is absolute address */
  42 } zorro7xx_driver_data[] = {
  43         { .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 },
  44         { .name = "WarpEngine 40xx", .offset = 0x40000 },
  45         { .name = "A4091", .offset = 0x800000 },
  46         { .name = "GForce 040/060", .offset = 0x40000 },
  47         { 0 }
  48 };
  49
  50 static struct zorro_device_id zorro7xx_zorro_tbl[] = {
  51         {
  52                 .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS,
  53                 .driver_data = (unsigned long)&zorro7xx_driver_data[0],
  54         },
  55         {
  56                 .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx,
  57                 .driver_data = (unsigned long)&zorro7xx_driver_data[1],
  58         },
  59         {
  60                 .id = ZORRO_PROD_CBM_A4091_1,
  61                 .driver_data = (unsigned long)&zorro7xx_driver_data[2],
  62         },
  63         {
  64                 .id = ZORRO_PROD_CBM_A4091_2,
  65                 .driver_data = (unsigned long)&zorro7xx_driver_data[2],
  66         },
  67         {
  68                 .id = ZORRO_PROD_GVP_GFORCE_040_060,
  69                 .driver_data = (unsigned long)&zorro7xx_driver_data[3],
  70         },
  71         { 0 }
  72 };
  73 MODULE_DEVICE_TABLE(zorro, zorro7xx_zorro_tbl);
  74
  75 static int zorro7xx_init_one(struct zorro_dev *z,
  76                              const struct zorro_device_id *ent)
  77 {
  78         struct Scsi_Host *host;
  79         struct NCR_700_Host_Parameters *hostdata;
  80         struct zorro_driver_data *zdd;
  81         unsigned long board, ioaddr;
  82
  83         board = zorro_resource_start(z);
  84         zdd = (struct zorro_driver_data *)ent->driver_data;
  85
  86         if (zdd->absolute) {
  87                 ioaddr = zdd->offset;
  88         } else {
  89                 ioaddr = board + zdd->offset;
  90         }
  91
  92         if (!zorro_request_device(z, zdd->name)) {
  93                 printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n",
  94                        board);
  95                 return -EBUSY;
  96         }
  97
  98         hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
  99         if (!hostdata) {
 100                 printk(KERN_ERR "zorro7xx: Failed to allocate host data\n");
 101                 goto out_release;
 102         }
 103
 104         /* Fill in the required pieces of hostdata */
 105         if (ioaddr > 0x01000000)
 106                 hostdata->base = ioremap(ioaddr, zorro_resource_len(z));
 107         else
 108                 hostdata->base = ZTWO_VADDR(ioaddr);
 109
 110         hostdata->clock = 50;
 111         hostdata->chip710 = 1;
 112
 113         /* Settings for at least WarpEngine 40xx */
 114         hostdata->ctest7_extra = CTEST7_TT1;
 115
 116         zorro7xx_scsi_driver_template.name = zdd->name;
 117
 118         /* and register the chip */
 119         host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata,
 120                               &z->dev);
 121         if (!host) {
 122                 printk(KERN_ERR "zorro7xx: No host detected; "
 123                                 "board configuration problem?\n");
 124                 goto out_free;
 125         }
 126
 127         host->this_id = 7;
 128         host->base = ioaddr;
 129         host->irq = IRQ_AMIGA_PORTS;
 130
 131         if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi",
 132                         host)) {
 133                 printk(KERN_ERR "zorro7xx: request_irq failed\n");
 134                 goto out_put_host;
 135         }
 136
 137         zorro_set_drvdata(z, host);
 138         scsi_scan_host(host);
 139
 140         return 0;
 141
 142  out_put_host:
 143         scsi_host_put(host);
 144  out_free:
 145         if (ioaddr > 0x01000000)
 146                 iounmap(hostdata->base);
 147         kfree(hostdata);
 148  out_release:
 149         zorro_release_device(z);
 150
 151         return -ENODEV;
 152 }
 153
 154 static void zorro7xx_remove_one(struct zorro_dev *z)
 155 {
 156         struct Scsi_Host *host = zorro_get_drvdata(z);
 157         struct NCR_700_Host_Parameters *hostdata = shost_priv(host);
 158
 159         scsi_remove_host(host);
 160
 161         NCR_700_release(host);
 162         if (host->base > 0x01000000)
 163                 iounmap(hostdata->base);
 164         kfree(hostdata);
 165         free_irq(host->irq, host);
 166         zorro_release_device(z);
 167 }
 168
 169 static struct zorro_driver zorro7xx_driver = {
 170         .name     = "zorro7xx-scsi",
 171         .id_table = zorro7xx_zorro_tbl,
 172         .probe    = zorro7xx_init_one,
 173         .remove   = zorro7xx_remove_one,
 174 };
 175
 176 static int __init zorro7xx_scsi_init(void)
 177 {
 178         return zorro_register_driver(&zorro7xx_driver);
 179 }
 180
 181 static void __exit zorro7xx_scsi_exit(void)
 182 {
 183         zorro_unregister_driver(&zorro7xx_driver);
 184 }
 185
 186 module_init(zorro7xx_scsi_init);
 187 module_exit(zorro7xx_scsi_exit);