1 // SPDX-License-Identifier: GPL-2.0
2 /* pci_sabre.c: Sabre specific PCI controller support.
4 * Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
5 * Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
6 * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
9 #include <linux/kernel.h>
10 #include <linux/types.h>
11 #include <linux/pci.h>
12 #include <linux/init.h>
13 #include <linux/export.h>
14 #include <linux/slab.h>
15 #include <linux/interrupt.h>
17 #include <linux/of_platform.h>
18 #include <linux/platform_device.h>
19 #include <linux/property.h>
22 #include <asm/iommu.h>
28 #include "iommu_common.h"
29 #include "psycho_common.h"
31 #define DRIVER_NAME "sabre"
32 #define PFX DRIVER_NAME ": "
34 /* SABRE PCI controller register offsets and definitions. */
35 #define SABRE_UE_AFSR 0x0030UL
36 #define SABRE_UEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
37 #define SABRE_UEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
38 #define SABRE_UEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
39 #define SABRE_UEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
40 #define SABRE_UEAFSR_SDTE 0x0200000000000000UL /* Secondary DMA Translation Error */
41 #define SABRE_UEAFSR_PDTE 0x0100000000000000UL /* Primary DMA Translation Error */
42 #define SABRE_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
43 #define SABRE_UEAFSR_OFF 0x00000000e0000000UL /* Offset (AFAR bits [5:3] */
44 #define SABRE_UEAFSR_BLK 0x0000000000800000UL /* Was block operation */
45 #define SABRE_UECE_AFAR 0x0038UL
46 #define SABRE_CE_AFSR 0x0040UL
47 #define SABRE_CEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */
48 #define SABRE_CEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */
49 #define SABRE_CEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */
50 #define SABRE_CEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */
51 #define SABRE_CEAFSR_ESYND 0x00ff000000000000UL /* ECC Syndrome */
52 #define SABRE_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */
53 #define SABRE_CEAFSR_OFF 0x00000000e0000000UL /* Offset */
54 #define SABRE_CEAFSR_BLK 0x0000000000800000UL /* Was block operation */
55 #define SABRE_UECE_AFAR_ALIAS 0x0048UL /* Aliases to 0x0038 */
56 #define SABRE_IOMMU_CONTROL 0x0200UL
57 #define SABRE_IOMMUCTRL_ERRSTS 0x0000000006000000UL /* Error status bits */
58 #define SABRE_IOMMUCTRL_ERR 0x0000000001000000UL /* Error present in IOTLB */
59 #define SABRE_IOMMUCTRL_LCKEN 0x0000000000800000UL /* IOTLB lock enable */
60 #define SABRE_IOMMUCTRL_LCKPTR 0x0000000000780000UL /* IOTLB lock pointer */
61 #define SABRE_IOMMUCTRL_TSBSZ 0x0000000000070000UL /* TSB Size */
62 #define SABRE_IOMMU_TSBSZ_1K 0x0000000000000000
63 #define SABRE_IOMMU_TSBSZ_2K 0x0000000000010000
64 #define SABRE_IOMMU_TSBSZ_4K 0x0000000000020000
65 #define SABRE_IOMMU_TSBSZ_8K 0x0000000000030000
66 #define SABRE_IOMMU_TSBSZ_16K 0x0000000000040000
67 #define SABRE_IOMMU_TSBSZ_32K 0x0000000000050000
68 #define SABRE_IOMMU_TSBSZ_64K 0x0000000000060000
69 #define SABRE_IOMMU_TSBSZ_128K 0x0000000000070000
70 #define SABRE_IOMMUCTRL_TBWSZ 0x0000000000000004UL /* TSB assumed page size */
71 #define SABRE_IOMMUCTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */
72 #define SABRE_IOMMUCTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */
73 #define SABRE_IOMMU_TSBBASE 0x0208UL
74 #define SABRE_IOMMU_FLUSH 0x0210UL
75 #define SABRE_IMAP_A_SLOT0 0x0c00UL
76 #define SABRE_IMAP_B_SLOT0 0x0c20UL
77 #define SABRE_IMAP_SCSI 0x1000UL
78 #define SABRE_IMAP_ETH 0x1008UL
79 #define SABRE_IMAP_BPP 0x1010UL
80 #define SABRE_IMAP_AU_REC 0x1018UL
81 #define SABRE_IMAP_AU_PLAY 0x1020UL
82 #define SABRE_IMAP_PFAIL 0x1028UL
83 #define SABRE_IMAP_KMS 0x1030UL
84 #define SABRE_IMAP_FLPY 0x1038UL
85 #define SABRE_IMAP_SHW 0x1040UL
86 #define SABRE_IMAP_KBD 0x1048UL
87 #define SABRE_IMAP_MS 0x1050UL
88 #define SABRE_IMAP_SER 0x1058UL
89 #define SABRE_IMAP_UE 0x1070UL
90 #define SABRE_IMAP_CE 0x1078UL
91 #define SABRE_IMAP_PCIERR 0x1080UL
92 #define SABRE_IMAP_GFX 0x1098UL
93 #define SABRE_IMAP_EUPA 0x10a0UL
94 #define SABRE_ICLR_A_SLOT0 0x1400UL
95 #define SABRE_ICLR_B_SLOT0 0x1480UL
96 #define SABRE_ICLR_SCSI 0x1800UL
97 #define SABRE_ICLR_ETH 0x1808UL
98 #define SABRE_ICLR_BPP 0x1810UL
99 #define SABRE_ICLR_AU_REC 0x1818UL
100 #define SABRE_ICLR_AU_PLAY 0x1820UL
101 #define SABRE_ICLR_PFAIL 0x1828UL
102 #define SABRE_ICLR_KMS 0x1830UL
103 #define SABRE_ICLR_FLPY 0x1838UL
104 #define SABRE_ICLR_SHW 0x1840UL
105 #define SABRE_ICLR_KBD 0x1848UL
106 #define SABRE_ICLR_MS 0x1850UL
107 #define SABRE_ICLR_SER 0x1858UL
108 #define SABRE_ICLR_UE 0x1870UL
109 #define SABRE_ICLR_CE 0x1878UL
110 #define SABRE_ICLR_PCIERR 0x1880UL
111 #define SABRE_WRSYNC 0x1c20UL
112 #define SABRE_PCICTRL 0x2000UL
113 #define SABRE_PCICTRL_MRLEN 0x0000001000000000UL /* Use MemoryReadLine for block loads/stores */
114 #define SABRE_PCICTRL_SERR 0x0000000400000000UL /* Set when SERR asserted on PCI bus */
115 #define SABRE_PCICTRL_ARBPARK 0x0000000000200000UL /* Bus Parking 0=Ultra-IIi 1=prev-bus-owner */
116 #define SABRE_PCICTRL_CPUPRIO 0x0000000000100000UL /* Ultra-IIi granted every other bus cycle */
117 #define SABRE_PCICTRL_ARBPRIO 0x00000000000f0000UL /* Slot which is granted every other bus cycle */
118 #define SABRE_PCICTRL_ERREN 0x0000000000000100UL /* PCI Error Interrupt Enable */
119 #define SABRE_PCICTRL_RTRYWE 0x0000000000000080UL /* DMA Flow Control 0=wait-if-possible 1=retry */
120 #define SABRE_PCICTRL_AEN 0x000000000000000fUL /* Slot PCI arbitration enables */
121 #define SABRE_PIOAFSR 0x2010UL
122 #define SABRE_PIOAFSR_PMA 0x8000000000000000UL /* Primary Master Abort */
123 #define SABRE_PIOAFSR_PTA 0x4000000000000000UL /* Primary Target Abort */
124 #define SABRE_PIOAFSR_PRTRY 0x2000000000000000UL /* Primary Excessive Retries */
125 #define SABRE_PIOAFSR_PPERR 0x1000000000000000UL /* Primary Parity Error */
126 #define SABRE_PIOAFSR_SMA 0x0800000000000000UL /* Secondary Master Abort */
127 #define SABRE_PIOAFSR_STA 0x0400000000000000UL /* Secondary Target Abort */
128 #define SABRE_PIOAFSR_SRTRY 0x0200000000000000UL /* Secondary Excessive Retries */
129 #define SABRE_PIOAFSR_SPERR 0x0100000000000000UL /* Secondary Parity Error */
130 #define SABRE_PIOAFSR_BMSK 0x0000ffff00000000UL /* Byte Mask */
131 #define SABRE_PIOAFSR_BLK 0x0000000080000000UL /* Was Block Operation */
132 #define SABRE_PIOAFAR 0x2018UL
133 #define SABRE_PCIDIAG 0x2020UL
134 #define SABRE_PCIDIAG_DRTRY 0x0000000000000040UL /* Disable PIO Retry Limit */
135 #define SABRE_PCIDIAG_IPAPAR 0x0000000000000008UL /* Invert PIO Address Parity */
136 #define SABRE_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO Data Parity */
137 #define SABRE_PCIDIAG_IDDPAR 0x0000000000000002UL /* Invert DMA Data Parity */
138 #define SABRE_PCIDIAG_ELPBK 0x0000000000000001UL /* Loopback Enable - not supported */
139 #define SABRE_PCITASR 0x2028UL
140 #define SABRE_PCITASR_EF 0x0000000000000080UL /* Respond to 0xe0000000-0xffffffff */
141 #define SABRE_PCITASR_CD 0x0000000000000040UL /* Respond to 0xc0000000-0xdfffffff */
142 #define SABRE_PCITASR_AB 0x0000000000000020UL /* Respond to 0xa0000000-0xbfffffff */
143 #define SABRE_PCITASR_89 0x0000000000000010UL /* Respond to 0x80000000-0x9fffffff */
144 #define SABRE_PCITASR_67 0x0000000000000008UL /* Respond to 0x60000000-0x7fffffff */
145 #define SABRE_PCITASR_45 0x0000000000000004UL /* Respond to 0x40000000-0x5fffffff */
146 #define SABRE_PCITASR_23 0x0000000000000002UL /* Respond to 0x20000000-0x3fffffff */
147 #define SABRE_PCITASR_01 0x0000000000000001UL /* Respond to 0x00000000-0x1fffffff */
148 #define SABRE_PIOBUF_DIAG 0x5000UL
149 #define SABRE_DMABUF_DIAGLO 0x5100UL
150 #define SABRE_DMABUF_DIAGHI 0x51c0UL
151 #define SABRE_IMAP_GFX_ALIAS 0x6000UL /* Aliases to 0x1098 */
152 #define SABRE_IMAP_EUPA_ALIAS 0x8000UL /* Aliases to 0x10a0 */
153 #define SABRE_IOMMU_VADIAG 0xa400UL
154 #define SABRE_IOMMU_TCDIAG 0xa408UL
155 #define SABRE_IOMMU_TAG 0xa580UL
156 #define SABRE_IOMMUTAG_ERRSTS 0x0000000001800000UL /* Error status bits */
157 #define SABRE_IOMMUTAG_ERR 0x0000000000400000UL /* Error present */
158 #define SABRE_IOMMUTAG_WRITE 0x0000000000200000UL /* Page is writable */
159 #define SABRE_IOMMUTAG_STREAM 0x0000000000100000UL /* Streamable bit - unused */
160 #define SABRE_IOMMUTAG_SIZE 0x0000000000080000UL /* 0=8k 1=16k */
161 #define SABRE_IOMMUTAG_VPN 0x000000000007ffffUL /* Virtual Page Number [31:13] */
162 #define SABRE_IOMMU_DATA 0xa600UL
163 #define SABRE_IOMMUDATA_VALID 0x0000000040000000UL /* Valid */
164 #define SABRE_IOMMUDATA_USED 0x0000000020000000UL /* Used (for LRU algorithm) */
165 #define SABRE_IOMMUDATA_CACHE 0x0000000010000000UL /* Cacheable */
166 #define SABRE_IOMMUDATA_PPN 0x00000000001fffffUL /* Physical Page Number [33:13] */
167 #define SABRE_PCI_IRQSTATE 0xa800UL
168 #define SABRE_OBIO_IRQSTATE 0xa808UL
169 #define SABRE_FFBCFG 0xf000UL
170 #define SABRE_FFBCFG_SPRQS 0x000000000f000000 /* Slave P_RQST queue size */
171 #define SABRE_FFBCFG_ONEREAD 0x0000000000004000 /* Slave supports one outstanding read */
172 #define SABRE_MCCTRL0 0xf010UL
173 #define SABRE_MCCTRL0_RENAB 0x0000000080000000 /* Refresh Enable */
174 #define SABRE_MCCTRL0_EENAB 0x0000000010000000 /* Enable all ECC functions */
175 #define SABRE_MCCTRL0_11BIT 0x0000000000001000 /* Enable 11-bit column addressing */
176 #define SABRE_MCCTRL0_DPP 0x0000000000000f00 /* DIMM Pair Present Bits */
177 #define SABRE_MCCTRL0_RINTVL 0x00000000000000ff /* Refresh Interval */
178 #define SABRE_MCCTRL1 0xf018UL
179 #define SABRE_MCCTRL1_AMDC 0x0000000038000000 /* Advance Memdata Clock */
180 #define SABRE_MCCTRL1_ARDC 0x0000000007000000 /* Advance DRAM Read Data Clock */
181 #define SABRE_MCCTRL1_CSR 0x0000000000e00000 /* CAS to RAS delay for CBR refresh */
182 #define SABRE_MCCTRL1_CASRW 0x00000000001c0000 /* CAS length for read/write */
183 #define SABRE_MCCTRL1_RCD 0x0000000000038000 /* RAS to CAS delay */
184 #define SABRE_MCCTRL1_CP 0x0000000000007000 /* CAS Precharge */
185 #define SABRE_MCCTRL1_RP 0x0000000000000e00 /* RAS Precharge */
186 #define SABRE_MCCTRL1_RAS 0x00000000000001c0 /* Length of RAS for refresh */
187 #define SABRE_MCCTRL1_CASRW2 0x0000000000000038 /* Must be same as CASRW */
188 #define SABRE_MCCTRL1_RSC 0x0000000000000007 /* RAS after CAS hold time */
189 #define SABRE_RESETCTRL 0xf020UL
191 #define SABRE_CONFIGSPACE 0x001000000UL
192 #define SABRE_IOSPACE 0x002000000UL
193 #define SABRE_IOSPACE_SIZE 0x000ffffffUL
194 #define SABRE_MEMSPACE 0x100000000UL
195 #define SABRE_MEMSPACE_SIZE 0x07fffffffUL
197 static int hummingbird_p
;
198 static struct pci_bus
*sabre_root_bus
;
200 static irqreturn_t
sabre_ue_intr(int irq
, void *dev_id
)
202 struct pci_pbm_info
*pbm
= dev_id
;
203 unsigned long afsr_reg
= pbm
->controller_regs
+ SABRE_UE_AFSR
;
204 unsigned long afar_reg
= pbm
->controller_regs
+ SABRE_UECE_AFAR
;
205 unsigned long afsr
, afar
, error_bits
;
208 /* Latch uncorrectable error status. */
209 afar
= upa_readq(afar_reg
);
210 afsr
= upa_readq(afsr_reg
);
212 /* Clear the primary/secondary error status bits. */
214 (SABRE_UEAFSR_PDRD
| SABRE_UEAFSR_PDWR
|
215 SABRE_UEAFSR_SDRD
| SABRE_UEAFSR_SDWR
|
216 SABRE_UEAFSR_SDTE
| SABRE_UEAFSR_PDTE
);
219 upa_writeq(error_bits
, afsr_reg
);
222 printk("%s: Uncorrectable Error, primary error type[%s%s]\n",
224 ((error_bits
& SABRE_UEAFSR_PDRD
) ?
226 ((error_bits
& SABRE_UEAFSR_PDWR
) ?
227 "DMA Write" : "???")),
228 ((error_bits
& SABRE_UEAFSR_PDTE
) ?
229 ":Translation Error" : ""));
230 printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n",
232 (afsr
& SABRE_UEAFSR_BMSK
) >> 32UL,
233 (afsr
& SABRE_UEAFSR_OFF
) >> 29UL,
234 ((afsr
& SABRE_UEAFSR_BLK
) ? 1 : 0));
235 printk("%s: UE AFAR [%016lx]\n", pbm
->name
, afar
);
236 printk("%s: UE Secondary errors [", pbm
->name
);
238 if (afsr
& SABRE_UEAFSR_SDRD
) {
240 printk("(DMA Read)");
242 if (afsr
& SABRE_UEAFSR_SDWR
) {
244 printk("(DMA Write)");
246 if (afsr
& SABRE_UEAFSR_SDTE
) {
248 printk("(Translation Error)");
254 /* Interrogate IOMMU for error status. */
255 psycho_check_iommu_error(pbm
, afsr
, afar
, UE_ERR
);
260 static irqreturn_t
sabre_ce_intr(int irq
, void *dev_id
)
262 struct pci_pbm_info
*pbm
= dev_id
;
263 unsigned long afsr_reg
= pbm
->controller_regs
+ SABRE_CE_AFSR
;
264 unsigned long afar_reg
= pbm
->controller_regs
+ SABRE_UECE_AFAR
;
265 unsigned long afsr
, afar
, error_bits
;
268 /* Latch error status. */
269 afar
= upa_readq(afar_reg
);
270 afsr
= upa_readq(afsr_reg
);
272 /* Clear primary/secondary error status bits. */
274 (SABRE_CEAFSR_PDRD
| SABRE_CEAFSR_PDWR
|
275 SABRE_CEAFSR_SDRD
| SABRE_CEAFSR_SDWR
);
278 upa_writeq(error_bits
, afsr_reg
);
281 printk("%s: Correctable Error, primary error type[%s]\n",
283 ((error_bits
& SABRE_CEAFSR_PDRD
) ?
285 ((error_bits
& SABRE_CEAFSR_PDWR
) ?
286 "DMA Write" : "???")));
288 /* XXX Use syndrome and afar to print out module string just like
289 * XXX UDB CE trap handler does... -DaveM
291 printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
294 (afsr
& SABRE_CEAFSR_ESYND
) >> 48UL,
295 (afsr
& SABRE_CEAFSR_BMSK
) >> 32UL,
296 (afsr
& SABRE_CEAFSR_OFF
) >> 29UL,
297 ((afsr
& SABRE_CEAFSR_BLK
) ? 1 : 0));
298 printk("%s: CE AFAR [%016lx]\n", pbm
->name
, afar
);
299 printk("%s: CE Secondary errors [", pbm
->name
);
301 if (afsr
& SABRE_CEAFSR_SDRD
) {
303 printk("(DMA Read)");
305 if (afsr
& SABRE_CEAFSR_SDWR
) {
307 printk("(DMA Write)");
316 static void sabre_register_error_handlers(struct pci_pbm_info
*pbm
)
318 struct device_node
*dp
= pbm
->op
->dev
.of_node
;
319 struct platform_device
*op
;
320 unsigned long base
= pbm
->controller_regs
;
324 if (pbm
->chip_type
== PBM_CHIP_TYPE_SABRE
)
327 op
= of_find_device_by_node(dp
);
331 /* Sabre/Hummingbird IRQ property layout is:
337 if (op
->archdata
.num_irqs
< 4)
340 /* We clear the error bits in the appropriate AFSR before
341 * registering the handler so that we don't get spurious
344 upa_writeq((SABRE_UEAFSR_PDRD
| SABRE_UEAFSR_PDWR
|
345 SABRE_UEAFSR_SDRD
| SABRE_UEAFSR_SDWR
|
346 SABRE_UEAFSR_SDTE
| SABRE_UEAFSR_PDTE
),
347 base
+ SABRE_UE_AFSR
);
349 err
= request_irq(op
->archdata
.irqs
[1], sabre_ue_intr
, 0, "SABRE_UE", pbm
);
351 printk(KERN_WARNING
"%s: Couldn't register UE, err=%d.\n",
354 upa_writeq((SABRE_CEAFSR_PDRD
| SABRE_CEAFSR_PDWR
|
355 SABRE_CEAFSR_SDRD
| SABRE_CEAFSR_SDWR
),
356 base
+ SABRE_CE_AFSR
);
359 err
= request_irq(op
->archdata
.irqs
[2], sabre_ce_intr
, 0, "SABRE_CE", pbm
);
361 printk(KERN_WARNING
"%s: Couldn't register CE, err=%d.\n",
363 err
= request_irq(op
->archdata
.irqs
[0], psycho_pcierr_intr
, 0,
364 "SABRE_PCIERR", pbm
);
366 printk(KERN_WARNING
"%s: Couldn't register PCIERR, err=%d.\n",
369 tmp
= upa_readq(base
+ SABRE_PCICTRL
);
370 tmp
|= SABRE_PCICTRL_ERREN
;
371 upa_writeq(tmp
, base
+ SABRE_PCICTRL
);
374 static void apb_init(struct pci_bus
*sabre_bus
)
376 struct pci_dev
*pdev
;
378 list_for_each_entry(pdev
, &sabre_bus
->devices
, bus_list
) {
379 if (pdev
->vendor
== PCI_VENDOR_ID_SUN
&&
380 pdev
->device
== PCI_DEVICE_ID_SUN_SIMBA
) {
383 pci_read_config_word(pdev
, PCI_COMMAND
, &word16
);
384 word16
|= PCI_COMMAND_SERR
| PCI_COMMAND_PARITY
|
385 PCI_COMMAND_MASTER
| PCI_COMMAND_MEMORY
|
387 pci_write_config_word(pdev
, PCI_COMMAND
, word16
);
389 /* Status register bits are "write 1 to clear". */
390 pci_write_config_word(pdev
, PCI_STATUS
, 0xffff);
391 pci_write_config_word(pdev
, PCI_SEC_STATUS
, 0xffff);
393 /* Use a primary/seconday latency timer value
396 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
397 pci_write_config_byte(pdev
, PCI_SEC_LATENCY_TIMER
, 64);
399 /* Enable reporting/forwarding of master aborts,
402 pci_write_config_byte(pdev
, PCI_BRIDGE_CONTROL
,
403 (PCI_BRIDGE_CTL_PARITY
|
404 PCI_BRIDGE_CTL_SERR
|
405 PCI_BRIDGE_CTL_MASTER_ABORT
));
410 static void sabre_scan_bus(struct pci_pbm_info
*pbm
, struct device
*parent
)
414 /* The APB bridge speaks to the Sabre host PCI bridge
415 * at 66Mhz, but the front side of APB runs at 33Mhz
418 * Hummingbird systems do not use APB, so they run
422 pbm
->is_66mhz_capable
= 1;
424 pbm
->is_66mhz_capable
= 0;
426 /* This driver has not been verified to handle
427 * multiple SABREs yet, so trap this.
429 * Also note that the SABRE host bridge is hardwired
433 printk(KERN_ERR PFX
"Multiple controllers unsupported.\n");
438 pbm
->pci_bus
= pci_scan_one_pbm(pbm
, parent
);
442 sabre_root_bus
= pbm
->pci_bus
;
444 apb_init(pbm
->pci_bus
);
446 sabre_register_error_handlers(pbm
);
449 static void sabre_pbm_init(struct pci_pbm_info
*pbm
,
450 struct platform_device
*op
)
452 psycho_pbm_init_common(pbm
, op
, "SABRE", PBM_CHIP_TYPE_SABRE
);
453 pbm
->pci_afsr
= pbm
->controller_regs
+ SABRE_PIOAFSR
;
454 pbm
->pci_afar
= pbm
->controller_regs
+ SABRE_PIOAFAR
;
455 pbm
->pci_csr
= pbm
->controller_regs
+ SABRE_PCICTRL
;
456 sabre_scan_bus(pbm
, &op
->dev
);
459 static const struct of_device_id sabre_match
[];
460 static int sabre_probe(struct platform_device
*op
)
462 const struct linux_prom64_registers
*pr_regs
;
463 struct device_node
*dp
= op
->dev
.of_node
;
464 struct pci_pbm_info
*pbm
;
465 u32 upa_portid
, dma_mask
;
471 hummingbird_p
= (uintptr_t)device_get_match_data(&op
->dev
);
472 if (!hummingbird_p
) {
473 struct device_node
*cpu_dp
;
475 /* Of course, Sun has to encode things a thousand
476 * different ways, inconsistently.
478 for_each_node_by_type(cpu_dp
, "cpu") {
479 if (of_node_name_eq(cpu_dp
, "SUNW,UltraSPARC-IIe"))
485 pbm
= kzalloc(sizeof(*pbm
), GFP_KERNEL
);
487 printk(KERN_ERR PFX
"Cannot allocate pci_pbm_info.\n");
491 iommu
= kzalloc(sizeof(*iommu
), GFP_KERNEL
);
493 printk(KERN_ERR PFX
"Cannot allocate PBM iommu.\n");
494 goto out_free_controller
;
499 upa_portid
= of_getintprop_default(dp
, "upa-portid", 0xff);
501 pbm
->portid
= upa_portid
;
504 * Map in SABRE register set and report the presence of this SABRE.
507 pr_regs
= of_get_property(dp
, "reg", NULL
);
510 printk(KERN_ERR PFX
"No reg property\n");
515 * First REG in property is base of entire SABRE register space.
517 pbm
->controller_regs
= pr_regs
[0].phys_addr
;
519 /* Clear interrupts */
522 for (clear_irq
= SABRE_ICLR_A_SLOT0
; clear_irq
< SABRE_ICLR_B_SLOT0
+ 0x80; clear_irq
+= 8)
523 upa_writeq(0x0UL
, pbm
->controller_regs
+ clear_irq
);
526 for (clear_irq
= SABRE_ICLR_SCSI
; clear_irq
< SABRE_ICLR_SCSI
+ 0x80; clear_irq
+= 8)
527 upa_writeq(0x0UL
, pbm
->controller_regs
+ clear_irq
);
529 /* Error interrupts are enabled later after the bus scan. */
530 upa_writeq((SABRE_PCICTRL_MRLEN
| SABRE_PCICTRL_SERR
|
531 SABRE_PCICTRL_ARBPARK
| SABRE_PCICTRL_AEN
),
532 pbm
->controller_regs
+ SABRE_PCICTRL
);
534 /* Now map in PCI config space for entire SABRE. */
535 pbm
->config_space
= pbm
->controller_regs
+ SABRE_CONFIGSPACE
;
537 vdma
= of_get_property(dp
, "virtual-dma", NULL
);
539 printk(KERN_ERR PFX
"No virtual-dma property\n");
546 dma_mask
|= 0x1fffffff;
550 dma_mask
|= 0x3fffffff;
555 dma_mask
|= 0x7fffffff;
559 printk(KERN_ERR PFX
"Strange virtual-dma size.\n");
563 err
= psycho_iommu_init(pbm
, tsbsize
, vdma
[0], dma_mask
, SABRE_WRSYNC
);
568 * Look for APB underneath.
570 sabre_pbm_init(pbm
, op
);
572 pbm
->next
= pci_pbm_root
;
575 dev_set_drvdata(&op
->dev
, pbm
);
589 static const struct of_device_id sabre_match
[] = {
592 .compatible
= "pci108e,a001",
597 .compatible
= "pci108e,a000",
602 static struct platform_driver sabre_driver
= {
605 .of_match_table
= sabre_match
,
607 .probe
= sabre_probe
,
610 static int __init
sabre_init(void)
612 return platform_driver_register(&sabre_driver
);
615 subsys_initcall(sabre_init
);