From 42a2701d5a7b82e5b8de26d5d8b89486d31b2a40 Mon Sep 17 00:00:00 2001 From: Dongsheng Song Date: Sun, 9 Mar 2008 13:43:04 +0800 Subject: [PATCH] Update superset_zh_CN.po, 10925 translated messages. --- lib/tmx/superset_zh_CN.po | 8491 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 8491 insertions(+) diff --git a/lib/tmx/superset_zh_CN.po b/lib/tmx/superset_zh_CN.po index 74f8569..f79cd3f 100644 --- a/lib/tmx/superset_zh_CN.po +++ b/lib/tmx/superset_zh_CN.po @@ -221,6 +221,303 @@ msgstr "" "</refsect1>\n" "</refentry>" +msgid "" +"\n" +"\n" +"NOTE NOTE NOTE NOTE NOTE\n" +"\n" +" You are upgrading an existing Mailman installation, but I can't tell what\n" +" version you were previously running.\n" +"\n" +" If you are upgrading from Mailman 1.0b9 or earlier you will need to\n" +" manually update your mailing lists. For each mailing list you need to\n" +" copy the file templates/options.html lists//options.html.\n" +"\n" +" However, if you have edited this file via the Web interface, you will have\n" +" to merge your changes into this file, otherwise you will lose your\n" +" changes.\n" +"\n" +"NOTE NOTE NOTE NOTE NOTE\n" +"\n" +msgstr "" +"\n" +"\n" +"注意 注意 注意 注意 注意\n" +"\n" +" 您正在升级一项已存在的Mailman安装, 但我无法得知\n" +" 您之前运行的是什么版本.\n" +"\n" +" 如果您从 Mailman 1.0b9 或更早版本升级, 您需要\n" +" 手动升级您的邮件列表. 对于每一张邮件列表,您需要\n" +" 复制文件 templates/options.html lists//options.html.\n" +"\n" +" 不管怎样, 如果您经由 Web 接口编辑了这个文件, 您必须\n" +" 将您的修改加入这个文件, 否则您将失去您的\n" +" 修改.\n" +"\n" +"注意 注意 注意 注意 注意\n" +"\n" + +msgid "" +"\n" +" confirm \n" +" Confirm an action. The confirmation-string is required and should be\n" +" supplied by a mailback confirmation notice.\n" +msgstr "" +"\n" +" confirm \n" +" 确认某个动作。confirmation-string会在在此之前邮寄给你的相应的确认通知中提供。\n" + +msgid "" +"\n" +" echo [args]\n" +" Simply echo an acknowledgement. Args are echoed back unchanged.\n" +msgstr "" +"\n" +" echo [args]\n" +" 简单地回复一个应答。args被原封不动的返回。\n" + +msgid "" +"\n" +" end\n" +" Stop processing commands. Use this if your mail program automatically\n" +" adds a signature file.\n" +msgstr "" +"\n" +" end\n" +" 停止处理命令。如果您的邮件程序自动的在您的邮件后面添加签名文件，就可以使\n" +" 用此命令。\n" + +msgid "" +"\n" +" help\n" +" Print this help message.\n" +msgstr "" +"\n" +" help\n" +" 打印此帮助信息。\n" + +msgid "" +"\n" +" info\n" +" Get information about this mailing list.\n" +msgstr "" +"\n" +" info\n" +" 获取此邮件列表的相关信息。\n" + +msgid "" +"\n" +" lists\n" +" See a list of the public mailing lists on this GNU Mailman server.\n" +msgstr "" +"\n" +" lists\n" +" 查看这个GNU Mailman邮件列表服务器上所有公共邮件列表的清单。\n" + +msgid "" +"\n" +" password [ ] [address=
]\n" +" Retrieve or change your password. With no arguments, this returns\n" +" your current password. With arguments and \n" +" you can change your password.\n" +"\n" +" If you're posting from an address other than your membership address,\n" +" specify your membership address with `address=
' (no brackets\n" +" around the email address, and no quotes!). Note that in this case the\n" +" response is always sent to the subscribed address.\n" +msgstr "" +"\n" +" password [ ] [address=
]\n" +" 取回或者更改您的密码. 当您不使用参数时，此命令返回您的当前密码。\n" +" 当您提供 和 时，就能修改您的密码。\n" +"\n" +" 如果您当前发信的地址不是您的成员地址，请指定您的成员地址：\n" +" \"address=
\" (注意在email地址前后不用括号和引号。)\n" +" 此时回信将会发送到您订阅时注册的地址。\n" + +msgid "" +"\n" +" set ...\n" +" Set or view your membership options.\n" +"\n" +" Use `set help' (without the quotes) to get a more detailed list of the\n" +" options you can change.\n" +"\n" +" Use `set show' (without the quotes) to view your current option\n" +" settings.\n" +msgstr "" +"\n" +" set ...\n" +" 重设或者查看您的成员设置.\n" +"\n" +" 使用 \"set help\" (不用引号) 可以取得您可以修改的更多的设置。\n" +"\n" +" 使用 \"set show\" (不用引号) 可以查看您当前的设置。\n" + +msgid "" +"\n" +" set help\n" +" Show this detailed help.\n" +"\n" +" set show [address=
]\n" +" View your current option settings. If you're posting from an address\n" +" other than your membership address, specify your membership address\n" +" with `address=
' (no brackets around the email address, and no\n" +" quotes!).\n" +"\n" +" set authenticate [address=
]\n" +" To set any of your options, you must include this command first, along\n" +" with your membership password. If you're posting from an address\n" +" other than your membership address, specify your membership address\n" +" with `address=
' (no brackets around the email address, and no\n" +" quotes!).\n" +"\n" +" set ack on\n" +" set ack off\n" +" When the `ack' option is turned on, you will receive an\n" +" acknowledgement message whenever you post a message to the list.\n" +"\n" +" set digest plain\n" +" set digest mime\n" +" set digest off\n" +" When the `digest' option is turned off, you will receive postings\n" +" immediately when they are posted. Use `set digest plain' if instead\n" +" you want to receive postings bundled into a plain text digest\n" +" (i.e. RFC 1153 digest). Use `set digest mime' if instead you want to\n" +" receive postings bundled together into a MIME digest.\n" +"\n" +" set delivery on\n" +" set delivery off\n" +" Turn delivery on or off. This does not unsubscribe you, but instead\n" +" tells Mailman not to deliver messages to you for now. This is useful\n" +" if you're going on vacation. Be sure to use `set delivery on' when\n" +" you return from vacation!\n" +"\n" +" set myposts on\n" +" set myposts off\n" +" Use `set myposts off' to not receive copies of messages you post to\n" +" the list. This has no effect if you're receiving digests.\n" +"\n" +" set hide on\n" +" set hide off\n" +" Use `set hide on' to conceal your email address when people request\n" +" the membership list.\n" +"\n" +" set duplicates on\n" +" set duplicates off\n" +" Use `set duplicates off' if you want Mailman to not send you messages\n" +" if your address is explicitly mentioned in the To: or Cc: fields of\n" +" the message. This can reduce the number of duplicate postings you\n" +" will receive.\n" +"\n" +" set reminders on\n" +" set reminders off\n" +" Use `set reminders off' if you want to disable the monthly password\n" +" reminder for this mailing list.\n" +msgstr "" +"\n" +" set help\n" +" 显示详细的帮助信息.\n" +"\n" +" set show [address=
]\n" +" 查看您的当前设置. 如果您现在加入使用的不是您的成员地址，\n" +" 请指定您的成员地址: \"address=
\"\n" +" (注意在email地址前后不用括号和引号。)\n" +"\n" +" set authenticate [address=
]\n" +" 在进行任何设置前，您都得先使用这条命令，输入您的成员密码。\n" +" 如果您现在加入使用的不是您的成员地址，请指定您的成员地址: \n" +" \"address=
\"(注意在email地址前后不用括号和引号。)\n" +"\n" +" set ack on\n" +" set ack off\n" +" 当\"ack\" 操作开启后，在您向列表发邮件后，您将收到一个确认信息。\n" +"\n" +" set digest plain\n" +" set digest mime\n" +" set digest off\n" +" 当操作\"digest\"关闭后，, 如果有人发信，您将能立即收到.\n" +" 使用命令 \"set digest plain\" 后，信件将已纯文本(plain\n" +" text)(i.e. RFC 1153 digest)形式的摘要发给您。\n" +" 使用命令 \"set digest mime\" 后，信件将以MIME(多用途的网际邮件\n" +" 扩充协议)形式的摘要发给您。\n" +"\n" +" set delivery on\n" +" set delivery off\n" +" 能开启或者关闭接受信件. 这并不阻止您发信，只是告诉Mailman不要再收信了\n" +" 当您度假或者外出时，这个命令可能很有用，但是，当您回来后，记住一定要再使用\n" +" \"set delivery on\"开启服务.\n" +"\n" +" set myposts on\n" +" set myposts off\n" +" 使用 \"set myposts off\" 后，您将不会再收到您发出去的信件的复制件\n" +" 但是当您设置了接收摘要时，这个命令将不起作用.\n" +"\n" +" set hide on\n" +" set hide off\n" +" 使用 \"set hide on\" 后，当有人索取成员列表时，您能隐藏您的邮件地址\n" +"\n" +" set duplicates on\n" +" set duplicates off\n" +" 使用 \"set duplicates off\"后，当您的地址在邮件的 To:(收件人)或者 Cc:(抄送) 区域中时\n" +" 您将不会收到邮件的复制件。这样能大量的减少您的信件量\n" +"\n" +" set reminders on\n" +" set reminders off\n" +" 使用 \"set reminders off\" 后，邮件列表的每月密码提示就会停止工作\n" + +msgid "" +"\n" +" subscribe [password] [digest|nodigest] [address=
]\n" +" Subscribe to this mailing list. Your password must be given to\n" +" unsubscribe or change your options, but if you omit the password, one\n" +" will be generated for you. You may be periodically reminded of your\n" +" password.\n" +"\n" +" The next argument may be either: `nodigest' or `digest' (no quotes!).\n" +" If you wish to subscribe an address other than the address you sent\n" +" this request from, you may specify `address=
' (no brackets\n" +" around the email address, and no quotes!)\n" +msgstr "" +"\n" +" subscribe [password] [digest|nodigest] [address=
]\n" +" 订阅此邮件列表. 如果您要取消订阅或者更改您的设置，您必须提供密码，\n" +" 但如果您忽略密码，我们将为您生成一个。我们将会周期性的提醒您您的密码\n" +"\n" +" 下一个参数是: `nodigest' or `digest' (不用引号!).\n" +" 如果您想订阅的地址不是您现在发信的地址您可以指定\n" +" `address=
' (注意在email地址前后不用括号和引号。)\n" + +msgid "" +"\n" +" unsubscribe [password] [address=
]\n" +" Unsubscribe from the mailing list. If given, your password must match\n" +" your current password. If omitted, a confirmation email will be sent\n" +" to the unsubscribing address. If you wish to unsubscribe an address\n" +" other than the address you sent this request from, you may specify\n" +" `address=
' (no brackets around the email address, and no\n" +" quotes!)\n" +msgstr "" +"\n" +" unsubscribe [password] [address=
]\n" +" 从邮件列表中取消订阅. 使用此命令时，您必须提供一个正确的密码\n" +" 如果不使用密码，必须提供一个正确的邮件地址。\n" +" 如果您想取消的邮件地址不是您当前发信的地址，请指定新的地址\n" +" `address=
' (注意在email地址前后不用括号和引号。)\n" + +msgid "" +"\n" +" who password\n" +" See everyone who is on this mailing list. The roster is limited to\n" +" list administrators and moderators only; you must supply the list\n" +" admin or moderator password to retrieve the roster.\n" +msgstr "" +"\n" +" who password\n" +" 查看所有在邮件列表中的人. 此命令仅限于列表管理员和仲裁员使用，您必须提供\n" +" 管理员和仲裁员密码才能使用此命令\n" + #. (screen) #, no-wrap msgid "" @@ -265,6 +562,29 @@ msgstr "" "\n" "#include <varargs.h>\n" +msgid "" +"\n" +"%(listname)s has both public and private mbox archives. Since this list\n" +"currently uses private archiving, I'm installing the private mbox archive\n" +"-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n" +" %(o_pub_mbox_file)s\n" +"to\n" +" %(o_pub_mbox_file)s.preb6\n" +"\n" +"You can integrate that into the archives if you want by using the 'arch'\n" +"script.\n" +msgstr "" +"\n" +"%(listname)s 既有公有邮箱存档又有私有邮箱存档. 因为这个列表\n" +"正在使用私有存档, 我将安装私有邮箱存档\n" +"-- %(o_pri_mbox_file)s -- 为活动存档, 并将\n" +" %(o_pub_mbox_file)s\n" +"更名为\n" +" %(o_pub_mbox_file)s.preb6\n" +"\n" +"如果您想将它们合并,您可以使用'arch'\n" +"脚本.\n" + #. (programlisting) #, no-wrap msgid "" @@ -537,6 +857,29 @@ msgstr "" "\t\t (node-list-rest nl))\n" "\t (loop result (node-list-rest nl))))))\n" +msgid "" +"\n" +"- Done.\n" +"\n" +msgstr "" +"\n" +"- 完成。\n" +"\n" + +msgid "" +"\n" +"- Ignored:" +msgstr "" +"\n" +"- 忽略:" + +msgid "" +"\n" +"- Unprocessed:" +msgstr "" +"\n" +"- 未处理：" + #, c-format msgid "" "\n" @@ -565,6 +908,32 @@ msgstr "" "------- 提交后版本 %ld >>>\n" "\n" +msgid "" +"\n" +"Check a given Mailman translation, making sure that variables and\n" +"tags referenced in translation are the same variables and tags in\n" +"the original templates and catalog.\n" +"\n" +"Usage:\n" +"\n" +"cd $MAILMAN_DIR\n" +"%(program)s [-q] \n" +"\n" +"Where is your country code (e.g. 'it' for Italy) and -q is\n" +"to ask for a brief summary.\n" +msgstr "" +"\n" +"检查给定的Mailman翻译, 确定翻译中涉及到的变量与\n" +"和原始模板与目录中的相同.\n" +"\n" +"用法:\n" +"\n" +"cd $MAILMAN_DIR\n" +"%(program)s [-q] \n" +"\n" +"这里 是您的国家代码 (例如 'it' 是意大利) , -q 用来\n" +"请求简明的摘要.\n" + #, c-format msgid "" "\n" @@ -580,6 +949,27 @@ msgstr "" "\n" "Cyrus SASL 认证可用。\n" +msgid "" +"\n" +"ERROR:\n" +"\n" +"The locks for some lists could not be acquired. This means that either\n" +"Mailman was still active when you upgraded, or there were stale locks in the\n" +"%(lockdir)s directory.\n" +"\n" +"You must put Mailman into a quiescent state and remove all stale locks, then\n" +"re-run \"make update\" manually. See the INSTALL and UPGRADE files for details.\n" +msgstr "" +"\n" +"错误:\n" +"\n" +"某些列表的锁无法获得. 这意味着\n" +"当您升级时, Mailman仍然运行, 或者有无效的锁定在\n" +"%(lockdir)s 目录内.\n" +"\n" +"您必须将Mailman 停止并移除所有失效的锁, \n" +"然后手动重新运行 \"make update\" . 参见 INSTALL 和 UPGRADE 文件来获得更多信息.\n" + #, c-format msgid "" "\n" @@ -680,6 +1070,13 @@ msgstr "" "日志信息未修改，或未指定\n" "a)终止，c)继续，e)编辑\n" +msgid "" +"\n" +"Pending posts:" +msgstr "" +"\n" +"阻塞的信件：" + #, c-format msgid "" "\n" @@ -714,6 +1111,20 @@ msgstr "" "\n" "SYSTEM \"http://docbook.org/docbook/xml/1.4/db3xml.dtd\" \"/share/sgml/db3xml/db3xml.dtd\"\n" +msgid "" +"\n" +"To finish removing your mailing list, you must edit your /etc/aliases (or\n" +"equivalent) file by removing the following lines, and possibly running the\n" +"`newaliases' program:\n" +"\n" +"## %(listname)s mailing list" +msgstr "" +"\n" +"为了删除您的该邮件列表，需要删除/etc/aliases 中的以下列。\n" +"同时需要运行程序newaliases\n" +"\n" +"## %(listname)s 邮件列表" + #, c-format msgid "" "\n" @@ -724,6 +1135,13 @@ msgstr "" msgid "" "\n" +"Usage:" +msgstr "" +"\n" +"用法:" + +msgid "" +"\n" "Valid options:\n" msgstr "" "\n" @@ -748,6 +1166,15 @@ msgstr "" "What say you? Will you yield, and this avoid?\n" "Or, guilty in defense, be thus destroyed?\n" +msgid "" +"\n" +"You are subscribed to this list with the case-preserved address\n" +"%(cpuser)s." +msgstr "" +"\n" +"您使用大小写相关的地址订阅了此列表\n" +"%(cpuser)s." + #. (synopsis) #, no-wrap msgid "" @@ -832,6 +1259,78 @@ msgstr "" msgid " " msgstr " " +msgid "" +" You have successfully canceled the posting of your message with\n" +" the Subject: header %(subject)s to the mailing list\n" +" %(listname)s." +msgstr "" +" 您已经成功地取消了发送标题头部为 %(subject)s \n" +" 的信息到 %(listname)s 这个邮件列表." + +msgid "" +" You have successfully changed your address on the %(listname)s\n" +" mailing list from %(oldaddr)s to %(newaddr)s. You\n" +" can now proceed to your membership\n" +" login page." +msgstr "" +" 在邮件列表 %(listname)s 中,您已经成功地将邮件地址从\n" +" %(oldaddr)s 修改为 %(newaddr)s. \n" +" 现在您可以 进入您的成员登陆页面了." + +msgid "" +" You have successfully confirmed your subscription request for\n" +" \"%(addr)s\" to the %(listname)s mailing list. A separate\n" +" confirmation message will be sent to your email address, along\n" +" with your password, and other useful information and links.\n" +"\n" +"

You can now\n" +" proceed to your membership login\n" +" page." +msgstr "" +" 您已经成功地确认对邮件列表 %(listname)s 发出订阅请求的地址\n" +" \"%(addr)s\" . 一个单独的验证信息将发送到您的电子邮箱里,\n" +" 同时还有您的密码和其他一些有用的信息和链接.\n" +"\n" +"

现在,您就可以\n" +" 进入您的成员登陆页面." + +msgid "" +" You have successfully confirmed your subscription request to the\n" +" mailing list %(listname)s, however final approval is required from\n" +" the list moderator before you will be subscribed. Your request\n" +" has been forwarded to the list moderator, and you will be notified\n" +" of the moderator's decision." +msgstr "" +" 您已经成功地确认了%(listname)s 你的订阅请求,\n" +" 但是在您能收到订阅之前,还需要列表主持者的最终批准.\n" +" 您的请求已经发给列表主持者了, 您将收到列表主持者的决定的通知." + +msgid "" +" You have successfully re-enabled your membership in the\n" +" %(listname)s mailing list. You can now visit your member options page.\n" +" " +msgstr "" +" 您已经成功的在邮件列表 %(listname)s 中重新设置您的成员资格有效.\n" +" 现在您可以 访问您的成员选项页.\n" +" " + +msgid "" +" You have successfully unsubscribed from the %(listname)s mailing\n" +" list. You can now visit the list's main\n" +" information page." +msgstr "" +" 您已经成功地取消了对邮件列表 %(listname)s 的订阅.\n" +" 现在您就可以 访问列表的主要信息页面." + +msgid "" +" You were not invited to this mailing list. The invitation has\n" +" been discarded, and both list administrators have been\n" +" alerted." +msgstr "" +" 这个邮件列表还没有邀请您. \n" +" 邀请函已经被丢弃, 而且列表管理员已经收到了警告." + #, c-format msgid " * adding path : %s ..." msgstr " * 正在增加路径: %s ..." @@ -848,6 +1347,12 @@ msgstr " * 正在修改路径: %s ..." msgid " * replacing path : %s ..." msgstr " * 正在替换路径: %s ..." +msgid " Description: %(description)s" +msgstr " 描述： %(description)s" + +msgid " Requests to: %(requestaddr)s" +msgstr " 请求发送到地址: %(requestaddr)s " + #. Now fetch the available merges for this source. #. ### FIXME: There's no reason why this API should fail to #. ### answer the question (when asked of a 1.5+ server), @@ -866,6 +1371,89 @@ msgstr " 合格范围: " msgid " Merged ranges: " msgstr " 合并范围: " +msgid " ack %(onoff)s" +msgstr " 确认 %(onoff)s" + +msgid " address not found:" +msgstr " 未找到的地址：" + +msgid " checking gid and mode for %(path)s" +msgstr " 为 %(path)s 检查gid和许可权" + +msgid " checking permissions on: %(path)s" +msgstr " 检查 %(path)s的许可权" + +msgid " checking set-gid for %(path)s" +msgstr " 检查 %(path)s 的set-gid许可权" + +msgid " clone address added:" +msgstr " 添加的复制地址：" + +msgid " clone address is already a member:" +msgstr " 复制地址已经是列表成员：" + +msgid " digest mime" +msgstr " MIME摘要" + +msgid " digest off" +msgstr " 取消摘要" + +msgid " digest plain" +msgstr " 纯文本摘要" + +msgid " duplicates %(onoff)s" +msgstr "复制 %(onoff)s" + +msgid " hide %(onoff)s" +msgstr "隐藏 %(onoff)s" + +msgid "" +" looks like you have a really recent CVS installation...\n" +" you're either one brave soul, or you already ran me" +msgstr "" +" 看起来您安装了最新的 CVS...\n" +" 您如果不是一个十分勇敢的人,就是已经运行我了" + +msgid " myposts %(onoff)s" +msgstr "我的信件 %(onoff)s" + +msgid " new list owners:" +msgstr " 新列表属主：" + +msgid " original address removed:" +msgstr " 源地址被移除：" + +msgid " reminders %(onoff)s" +msgstr "提示函 %(onoff)s" + +msgid " scanning list owners:" +msgstr " 扫描列表属主：" + +msgid "" +" unknown file in the way, moving\n" +" %(o_pri_mbox_file)s\n" +" to\n" +" %(newname)s" +msgstr "" +" 不明的文件,移动\n" +" %(o_pri_mbox_file)s\n" +" 至\n" +" %(newname)s" + +msgid "" +" unknown file in the way, moving\n" +" %(o_pub_mbox_file)s\n" +" to\n" +" %(newname)s" +msgstr "" +" 未知文件,移动\n" +" %(o_pub_mbox_file)s\n" +" 至\n" +" %(newname)s" + +msgid " %(file)s: okay" +msgstr " %(file)s: 完好" + #, c-format msgid " %ld => (dropped)\n" msgstr " %ld => (丢弃)\n" @@ -899,14 +1487,37 @@ msgstr "" msgid " Source path: %s\n" msgstr " 源路径: %s\n" +msgid " Thread" +msgstr " 线索" + +msgid " %(size)i bytes " +msgstr "%(size)i 字节" + +msgid " (%(count)d of %(total)d)" +msgstr " ( %(total)d 的 %(count)d" + #. Human explanatory part, generated by apr_strftime as "Sat, 01 Jan 2000" msgid " (%a, %d %b %Y)" msgstr " (%a, %Y-%m-%d)" +msgid " (Digest mode)" +msgstr "(摘要模式)" + +msgid "" +" (but we obscure the addresses so they are not\n" +" easily recognizable by spammers)." +msgstr "(但是我们将地址模糊化，这样它们将不会轻易被垃圾信息收集器识别)。" + #, c-format msgid " (from %s:%ld)" msgstr " (从 %s:%ld)" +msgid " (requires authorization)" +msgstr "(需要授权)" + +msgid " (requires confirmation)
 
" +msgstr " (请求确认)
 
" + msgid " - The certificate has an unknown error.\n" msgstr " - 证书发生未知错误。\n" @@ -924,9 +1535,30 @@ msgstr " - 此证书并不是由信任的权威机权颁发。请使用此指纹 msgid " - The certificate is not yet valid.\n" msgstr " - 证书未生效。\n" +msgid "

Enter your " +msgstr "

输入你的" + msgid " ARG" msgstr " ARG" +msgid "" +" If you leave the field blank, you will be prompted for\n" +" your email address" +msgstr "如果您将该字段设为空白，您将被提示输入您的邮件地址。" + +msgid " The last bounce received from you was dated %(date)s" +msgstr "您最后的退信日期为 %(date)s" + +msgid "" +" To visit the general information page for an unadvertised list,\n" +" open a URL similar to this one, but with a '/' and the %(adj)s\n" +" list name appended.\n" +"

List administrators, you can visit " +msgstr "" +" 要访问没有发布的列表的通用信息,\n" +" 打开类似的 URL , 但是在列表名后附加上 '/' 和 %(adj)s .\n" +"

如果你是列表管理员,您可以访问 " + #. (screen) #, no-wrap msgid "" @@ -993,12 +1625,37 @@ msgstr "" "11/16/97 17:17 61,865,984 pagefile.sys\n" " 2/13/94 6:21 9,349 WINA20.386 " +msgid " and password to visit the subscribers list:

" +msgstr "和口令以便访问订阅者列表：

" + msgid " arg" msgstr " 参数" +msgid " at " +msgstr "在" + +msgid " bytes" +msgstr "字节" + msgid " done.\n" msgstr "完成。\n" +msgid " from %(remote)s" +msgstr "来自 %(remote)s" + +msgid " is already a member" +msgstr "已经是成员了" + +msgid " subscribers: " +msgstr "订阅者：" + +msgid "" +" to find the management interface for your list.\n" +"

If you are having trouble using the lists, please contact " +msgstr "" +" 以找到您的列表管理接口.\n" +"

如果您在使用列表时碰到的麻烦,请与我们联系 " + msgid " with no output." msgstr " 没有输出。" @@ -1030,6 +1687,9 @@ msgstr "使用“忽略范围”标记了尚未缓存的版本范围" msgid "# authors shown individually:" msgstr "# 作者单独显示:" +msgid "## %(listname)s mailing list" +msgstr "## %(listname)s 邮件列表" + #. (title) msgid "#PCDATA and repetition" msgstr "#PCDATA 与重复" @@ -1058,6 +1718,154 @@ msgstr "$Revision: 5449 $" msgid "$Revision: 5626 $" msgstr "$Revision: 5626 $" +msgid "%%%" +msgstr "%%%" + +msgid "%(address)s is not a member of the %(listname)s mailing list" +msgstr "%(address)s 不是邮件列表 %(listname)s 中的地址" + +msgid "" +"%(address)s was invited to a different mailing\n" +"list, but in a deliberate malicious attempt they tried to confirm the\n" +"invitation to your list. We just thought you'd like to know. No further\n" +"action by you is required." +msgstr "" +"%(address)s 被邀请加入另一个邮件列表, 但却恶意地\n" +"将其对邀请的回复发送给您，我们估计您乐意了解这个情况但您不必采取任何行动。" + +msgid "%(allcnt)s members total" +msgstr "成员总数 %(allcnt)s" + +msgid "%(allcnt)s members total, %(membercnt)s shown" +msgstr "成员总数 %(allcnt)s, 显示了 %(membercnt)s " + +msgid "%(day)i %(month)s %(year)i" +msgstr "%(day)i 日 %(month)s 月 %(year)i 年" + +msgid "%(days)d %(units)s" +msgstr "%(days)d %(units)s" + +msgid "%(dbdir)s \"other\" perms must be 000" +msgstr "%(dbdir)s的\"其它\"许可权必须为000" + +msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s" +msgstr "%(dbfile)s 为 %(owner)s 所有(必须为 %(user)s 所有" + +msgid "%(file)s permissions must be 066x (got %(octmode)s)" +msgstr "%(file)s 的权限必须是 066x （获得 %(octmode)s）" + +msgid "%(host)s mailing list memberships reminder" +msgstr "%(host)s邮件列表成员身份提示" + +msgid "%(hostname)s Mailing Lists" +msgstr " %(hostname)s 邮件列表" + +msgid "%(hostname)s mailing lists - Admin Links" +msgstr "%(hostname)s 的邮件列表 - 管理链接" + +msgid "%(i)3d. List name: %(realname)s" +msgstr "%(i)3d. 列表名： %(realname)s" + +msgid "%(listfullname)s mailing list reminder" +msgstr "%(listfullname)s 邮件列表提示函" + +msgid "%(listinfo_link)s list run by %(owner_link)s" +msgstr "由 %(owner_link)s 运行的 %(listinfo_link)s 邮件列表" + +msgid "%(listname)s %(msg)s not found as %(filename)s" +msgstr "没有找到叫 %(filename)s的 %(listname)s %(msg)s " + +msgid "%(listname)s mailing list probe message" +msgstr "%(listname)s 的邮件列表探测消息" + +msgid "%(listname)s post from %(sender)s requires approval" +msgstr "%(listname)s 中来自 %(sender)s 的信件需要审批" + +msgid "%(messages)d messages found" +msgstr "查找到 %(messages)d 封信件" + +msgid "%(month)s %(year)i" +msgstr "%(month)s 月 %(year)i 年" + +msgid "%(name)s runs the %(runnername)s qrunner" +msgstr "%(name)s 运行 %(runnername)s qrunner" + +msgid "%(newaddr)s is already a member of the list." +msgstr "%(newaddr)s 已经是列表的成员." + +msgid "%(ord)s quarter %(year)i" +msgstr "%(year)i 的第 %(ord)s 季度" + +msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)" +msgstr "%(path)s所属组错误(当前组: %(groupname)s, 期望值为 %(MAILMAN_GROUP)s)" + +msgid "%(path)s must be set-gid" +msgstr "%(path)s必须是set-gid的" + +msgid "%(private)s must not be other-readable" +msgstr "%(private)s不能是其他人可读(other-readable)" + +msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)" +msgstr "%(pwfile)s 的许可权必须是0640(现在是 %(octmode)s)" + +msgid "%(realname)s -- Edit html for %(template_info)s" +msgstr "%(realname)s -- 为 %(template_info)s 编辑html " + +msgid "%(realname)s -- HTML Page Editing" +msgstr "%(realname)s -- HTML 页面编辑" + +msgid "%(realname)s Administration (%(label)s)" +msgstr "%(realname)s 管理员 (%(label)s)" + +msgid "%(realname)s Administrative Database" +msgstr "%(realname)s 管理数据库" + +msgid "%(realname)s Administrative Database Results" +msgstr "%(realname)s 管理数据库结果" + +msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d" +msgstr "%(realname)s 摘要, 卷 %(volume)d, 发布 %(issue)d" + +msgid "" +"%(realname)s Mailing list Configuration Help\n" +"
%(varname)s Option" +msgstr "" +"%(realname)s 邮件列表配置帮助\n" +"
%(varname)s 选项" + +msgid "%(realname)s administrative interface" +msgstr "%(realname)s 的管理接口" + +msgid "%(realname)s list: member options for user %(safeuser)s" +msgstr "%(realname)s 列表： 用户 %(safeuser)s 的成员选项信息" + +msgid "%(realname)s list: member options login page" +msgstr "%(realname)s 列表： 成员选项登录页 " + +msgid "%(realname)s mailing list administration
%(label)s Section" +msgstr "%(realname)s 邮件列表管理员n
%(label)s 部分" + +msgid "%(realname)s post acknowledgement" +msgstr "%(realname)s发送确认" + +msgid "%(realname)s roster authentication failed." +msgstr "%(realname)s身份验证失败" + +msgid "%(realname)s subscription notification" +msgstr "%(realname)s 订阅通知" + +msgid "%(realname)s unsubscribe notification" +msgstr "%(realname)s 退订通知" + +msgid "%(safetemplatename)s: Invalid template" +msgstr "%(safetemplatename)s: 无效的模版" + +msgid "%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i" +msgstr "%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i" + +msgid "%(wrapper)s must be set-gid" +msgstr "%(wrapper)s必须是set-gid的" + #. Resource IDs: (357) #, c-format msgid "%.2f MBytes transferred" @@ -1238,6 +2046,27 @@ msgstr "%s ：工作副本" msgid "%s blocked by %s hook (exit code %d)" msgstr "%s 被 %s 钩子阻塞(退出代码 %d)" +msgid "" +"%s has both public and private mbox archives. Since this list\n" +"currently uses public archiving, I'm installing the public mbox file\n" +"archive file (%s) as the active one, and renaming\n" +" %s\n" +" to\n" +" %s.preb6\n" +"\n" +"You can integrate that into the archives if you want by using the 'arch'\n" +"script.\n" +msgstr "" +"%s 既有公有邮箱存档又有私有邮箱存档. 因为这个列表\n" +"正在使用公有存档, 我将安装公有邮箱存档\n" +"存档文件 (%s) 为活动者, 并将\n" +" %s\n" +" 更名为\n" +" %s.preb6\n" +"\n" +"如果您想将它们合并,您可以使用'arch'\n" +"脚本.\n" + #, c-format msgid "%s hook failed (exit code %d)" msgstr "钩子 “%s” 失败(退出代码 %d)" @@ -8606,6 +9435,9 @@ msgstr "" "\n" "</bibliography>\n" +msgid "<blank line>" +msgstr "<空行>" + #. (screen) #, no-wrap msgid "" @@ -10373,6 +11205,21 @@ msgstr "只有在 XML 模式 “with-revprop” 选项才有效" msgid "(* comp)" msgstr "(* comp)" +msgid "" +"(%(which)s is only available to the list\n" +" members.)" +msgstr "(%(which)s只对列表成员有效)" + +msgid "" +"(%(which)s is only available to the list\n" +" administrator.)" +msgstr "(%(which)s只对列表管理员有效)" + +msgid "" +"(Administrivia filter) Check postings and intercept ones\n" +" that seem to be administrative requests?" +msgstr "(邮件过滤器) 检查邮件和那些看起来像是管理请求但被中途拦截的邮件吗？" + #, c-format msgid "(Binary files differ)\n" msgstr "(二进制文件不同)\n" @@ -10384,6 +11231,9 @@ msgstr "" "(二进制文件不同)\n" "\n" +msgid "(Note - you are subscribing to a list of mailing lists, so the %(type)s notice will be sent to the admin address for your membership, %(addr)s.)

" +msgstr "(注意 - 您正在订阅一个邮件列表，所以 %(type)s 通知将被发送到管理员以告知您用来订阅的地址 %(addr)s。)

" + #. (para) msgid "(On a UNIX machine, use colons instead of semicolons to delimit the filenames.)" msgstr "(在 UNIX 机器中，用冒号来代替分号来分隔文件名。)" @@ -10394,6 +11244,9 @@ msgstr "(R)拒绝 或 (t)暂时接受 ？" msgid "(R)eject, accept (t)emporarily or accept (p)ermanently? " msgstr "(R)拒绝，(t)暂时接受，或(p)永远接受？" +msgid "(as owner)" +msgstr "(列表属主)" + #. (literal) msgid "(attribute-string \"\" )" msgstr "(attribute-string \"\" )" @@ -10570,9 +11423,18 @@ msgstr "" " font-posture: 'upright\n" " (process-children)))" +msgid "(fixing)" +msgstr "(固定)" + +msgid "(help)" +msgstr "(帮助)" + msgid "(local)" msgstr "(本地)" +msgid "(locked)" +msgstr "(已加锁)" + #. Resource IDs: (208) msgid "(multiple targets selected)" msgstr "(已选择多重目标)" @@ -10580,6 +11442,9 @@ msgstr "(已选择多重目标)" msgid "(no author)" msgstr "(没有作者信息)" +msgid "(no change)" +msgstr "(无更改)" + #. Resource IDs: (213) msgid "(no changelist)" msgstr "(无修改列表)" @@ -10587,6 +11452,9 @@ msgstr "(无修改列表)" msgid "(no date)" msgstr "(没有时间信息)" +msgid "(no subject)" +msgstr "(无主题)" + #. Resource IDs: (314) msgid "(not found)" msgstr "(未找到)" @@ -10603,6 +11471,9 @@ msgstr "(source 已经不在 HEAD 中)\n" msgid "(unknown)" msgstr "(未知)" +msgid "(unlocked)" +msgstr "(已解锁)" + #. (term) msgid "*" msgstr "*" @@ -10644,11 +11515,38 @@ msgstr "+" msgid "-" msgstr "-" +msgid "- %(o_tmpl)s doesn't exist, leaving untouched" +msgstr "- %(o_tmpl)s 不存在, 不做修改" + #. Resource IDs: (188) #, c-format msgid "- %d" msgstr "- %d" +msgid "- Results:" +msgstr "- 结果：" + +msgid "- This list looks like it might have <= b4 list templates around" +msgstr "- 看来可能有<=b4列表模板" + +msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched" +msgstr "- %(o_tmpl)s 和 %(n_tmpl)s 均存在, 将不做任何修改" + +msgid "- moved %(o_tmpl)s to %(n_tmpl)s" +msgstr "- 移动 %(o_tmpl)s 至 %(n_tmpl)s" + +msgid "- nothing to update here" +msgstr "- 没有需要升级的" + +msgid "- updating old private mbox file" +msgstr "- 正在升级旧的私有邮箱文件" + +msgid "- updating old public mbox file" +msgstr "- 正在升级旧有公有邮箱文件" + +msgid "- usenet watermarks updated and gate_watermarks removed" +msgstr "- 新闻组水印升级,gate_watermarks 移除" + #. (arg) msgid "-$" msgstr "-$" @@ -10673,6 +11571,9 @@ msgstr "--- 正在反向合并 r%ld 到 “%s”:\n" msgid "--- Reverse-merging r%ld through r%ld into '%s':\n" msgstr "--- 正在反向合并 r%ld，经由 r%ld，到 “%s”:\n" +msgid "-------------- next part --------------\n" +msgstr "-------------- 下一部分 --------------\n" + msgid "--This line, and those below, will be ignored--" msgstr "--此行及以下内容将会被忽略--" @@ -10680,6 +11581,9 @@ msgstr "--此行及以下内容将会被忽略--" msgid "--accept=%s incompatible with --non-interactive" msgstr "--accept=%s 与 --non-interactive 不兼容" +msgid "--all requires --run" +msgstr "--all需要--run" + msgid "--auto-props and --no-auto-props are mutually exclusive" msgstr "--auto-props 与 --no-auto-props 是互斥的" @@ -10881,6 +11785,15 @@ msgstr "-y" msgid "..." msgstr "..." +msgid "...after this one." +msgstr "...在这个之后" + +msgid "...before this one." +msgstr "在这个之前" + +msgid "...or specify a file to upload:" +msgstr "...指定一个上传的文件:" + #, c-format msgid ".merge-left.r%ld" msgstr ".merge-left.r%ld" @@ -11043,6 +11956,20 @@ msgstr "：基础版本" msgid ": working copy" msgstr "：工作副本" +msgid "; it was disabled by the list administrator" +msgstr "；列表管理员禁止了该选项" + +msgid "; it was disabled by you" +msgstr "；您禁止了该选项" + +msgid "" +"; it was disabled due to excessive bounces. The\n" +" last bounce was received on %(date)s" +msgstr "；由于退信过多，它被禁止了。最后一封退信在 %(date)s 收到。" + +msgid "; it was disabled for unknown reasons" +msgstr "；由于不明原因，它被禁止了" + msgid "; run 'svn update' to complete it" msgstr "；请执行 “svn update” 来完成操作。" @@ -11050,6 +11977,9 @@ msgstr "；请执行 “svn update” 来完成操作。" msgid "< &Back" msgstr "< 后退(&B)" +msgid "<----- start object %(cnt)s ----->" +msgstr "<----- start object %(cnt)s ----->" + #, c-format msgid "<<< Started new transaction, based on original revision %ld\n" msgstr "<<< 开始新的事务，基于原始版本 %ld\n" @@ -11558,6 +12488,9 @@ msgstr ".WordAsWord 元素< msgid ".XRef element" msgstr ".XRef 元素" +msgid "

Currently, there are no archives.

" +msgstr "

目前没有归档文件

" + #. (term) msgid "CALS Table Model Document Type Definition" msgstr "CALS 表格模型文档类型定义" @@ -11638,6 +12571,29 @@ msgstr "XSL 样式表" msgid "Word Perfect is one of several word processors to claim support for SGML." msgstr "Word Perfect is one of several word processors to claim support for SGML." +msgid "either " +msgstr "任一的" + +msgid "Cancel and return to list administration" +msgstr "取消并返回到列表管理页" + +msgid "" +"Invalid confirmation string:\n" +" %(safecookie)s.\n" +"\n" +"

Note that confirmation strings expire approximately\n" +" %(days)s days after the initial subscription request. If your\n" +" confirmation has expired, please try to re-submit your subscription.\n" +" Otherwise, re-enter your confirmation\n" +" string." +msgstr "" +"无效的验证字符串:\n" +" %(safecookie)s.\n" +"\n" +"

请注意验证字符串会在最初订阅后大约%(days)s 天\n" +" 过期. 如果您的验证字符串过期了, 请重新提交您的订阅.\n" +" 否则, 请重新键入 您的验证字符串" + #. Resource IDs: (145) msgid "" "TortoiseSVN is a shell extension.\n" @@ -11652,6 +12608,104 @@ msgstr "" "在弹出的右键菜单中可以找到所有的 TortoiseSVN 命令。\n" "更详细的使用请阅读手册！" +msgid "" +"ack -- Does the member get acknowledgements of their\n" +" posts?" +msgstr "确认 -- 用户收到对他们邮件的确认信了吗?" + +msgid "" +"digest -- Does the member get messages in digests?\n" +" (otherwise, individual messages)" +msgstr "" +"摘要 -- 用户是否要以摘要的形式接受信件?\n" +" (否则, 单个的信件)" + +msgid "" +"hide -- Is the member's address concealed on\n" +" the list of subscribers?" +msgstr "隐藏 -- 用户的地址在订阅者列表中是隐藏的吗?" + +msgid "language -- Language preferred by the user" +msgstr "语言 -- 用户偏好的语言" + +msgid "" +"mod -- The user's personal moderation flag. If this is\n" +" set, postings from them will be moderated, otherwise they will be\n" +" approved." +msgstr "" +"mod -- 用户的个人节制标志. 如果设置该值,\n" +" 用户发出的信件将被缓存, 否则将被发送。" + +msgid "" +"nodupes -- Does the member want to avoid duplicates of the\n" +" same message?" +msgstr "无副本 -- 用户是否想避免收到同一信件的副本?" + +msgid "" +"nomail -- Is delivery to the member disabled? If so, an\n" +" abbreviation will be given describing the reason for the disabled\n" +" delivery:\n" +"

  • U -- Delivery was disabled by the user via their\n" +" personal options page.\n" +"
  • A -- Delivery was disabled by the list\n" +" administrators.\n" +"
  • B -- Delivery was disabled by the system due to\n" +" excessive bouncing from the member's address.\n" +"
  • ? -- The reason for disabled delivery isn't known.\n" +" This is the case for all memberships which were disabled\n" +" in older versions of Mailman.\n" +"
" +msgstr "" +"没有邮件 -- 向用户的投递失效了么? 如果是这样, \n" +" 将给出一个简短的信息描述投递失效的原因:\n" +"
  • U -- 用户在个人选项页面中禁止了投递.\n" +"
  • A -- 列表管理员禁止了投递.\n" +"
  • B -- 由于该用户地址过多的退信,系统禁止了投递.\n" +"
  • ? -- 投递失效的原因未知.\n" +" 在Mailman的早些版本中这是对所有被禁止成员投递信息时出现的情况.\n" +"
" + +msgid "" +"not metoo -- Does the member want to avoid copies of their\n" +" own postings?" +msgstr "除了我 -- 用户是否想避免收到自己信件的副本?" + +msgid "" +"plain -- If getting digests, does the member get plain\n" +" text digests? (otherwise, MIME)" +msgstr "" +"纯文本 -- 如果接收摘要,是纯文本形式的摘要么?\n" +" (否则, 使用多用途的网际邮件扩充协议MIME)" + +msgid "" +"real_name attribute not\n" +" changed! It must differ from the list's name by case\n" +" only." +msgstr "real_name属性没有被修改!它必须与邮件列表有大小写上的不同" + +msgid "unsub -- Click on this to unsubscribe the member." +msgstr "取消订阅 -- 点击此处退出成员列表." + +msgid "
(Details for %(varname)s)" +msgstr "
(%(varname)s的细节)" + +msgid "
(Edit %(varname)s)" +msgstr "
(编辑 %(varname)s)" + +msgid "
...specify a file to upload
" +msgstr "
...指定一个上传的文件
" + +msgid "" +"
Note:\n" +" setting this value performs an immediate action but does not modify\n" +" permanent state." +msgstr "" +"
注释:\n" +" 设置此值会在当前环境立刻生效，但此值不会被保存。" + +msgid "
Return to the " +msgstr "
返回到" + #. (para) msgid "DocBook 5.0: The Definitive Guide Copyright © 2005–2007 Norman Walsh. Portions Copyright © 1999-2003 O'Reilly Media, Inc." msgstr "DocBook 5.0：权威指南 版权 © 2005–2007 Norman Walsh。部分版权 © 1999-2003 O'Reilly 媒体有限公司。" @@ -11667,6 +12721,47 @@ msgstr "第三部分：附录 讨论其它资源：" msgid " is missing ancestry" msgstr "没有祖先" +msgid "(%(num_concealed)d private members not shown)" +msgstr "(%(num_concealed)d个私有成员没有显示)" + +msgid "(1 private member not shown)" +msgstr "(1个私有成员没有显示)" + +msgid "" +"Warning: changing this option here\n" +" could cause other screens to be out-of-sync. Be sure to reload any other\n" +" pages that are displaying this option for this mailing list. You can also\n" +" " +msgstr "" +"警告: 更改此选项\n" +" 可能引起其他窗口的不同步。确保重新载入邮件列表中所有使用该选项的页。\n" +" 您也可以\n" +" " + +msgid "Enter the text below, or...
" +msgstr "输入以下文本, 或者...
" + +msgid "Message with id #%(id)d is corrupted." +msgstr "ID号为 #%(id)d 的消息损坏了." + +msgid "Message with id #%(id)d was lost." +msgstr "ID号为 #%(id)d 的消息丢失了." + +msgid "No topics defined" +msgstr "没有已定义的主题" + +msgid "Not available" +msgstr "不可用" + +msgid "The sender is now a member of this list" +msgstr "这个发送者现在是这个列表的成员了" + +msgid "Yes, I really want to unsubscribe" +msgstr "是的，我确实想要退订" + +msgid "not available" +msgstr "不可用" + #. (para) msgid "action (anyURI)" msgstr "action (anyURI)" @@ -12529,6 +13624,13 @@ msgstr "标题参考页 uniquenesspublic identifiersAn important characteristic of public identifiers is that they are intended to be globally unique. Referring to a document with a public identifier should mean that the identifier will resolve to the same actual document on any system, even though the location of that document on each system may vary. As a rule, you should never reuse public identifiers, and a published revision should have a new public identifier. Not following these rules defeats one purpose of the public identifier." msgstr "唯一的公共标识符公共标识符的一个重要特性是它们是 全局唯一的。用全局标示符引用文档意味着在任何系统中，这个标示符能解析成同一个实际文档，即使这个文档在每个系统上的位置不同。作为规则，你永远也不应该重用公共标识符，并且每个发行版应该有一个新的公共标识符。不遵循这些规则就违背了公共标识符的初衷。" +msgid "" +"
  • Set everyone's moderation bit, including\n" +" those members not currently visible" +msgstr "" +"
  • 设置每位成员的节制位，包括\n" +" 目前不可见的用户" + #. (para) msgid "Common attributes (ID required) and common linking attributes." msgstr "通用属性 (要求有 ID ) 和 通用链接属性。" @@ -12585,10 +13687,99 @@ msgstr "W3C 推荐标准。" msgid "XML.com, run jointly by Songline Studios and Seybold, is a site devoted to making XML accessible." msgstr "XML.com 由 Songline Studios 和 Seybold 共同维护，专注于使 XML 更容易使用。" +msgid "" +msgstr "<丢失>" + #. Resource IDs: (209) msgid "" msgstr "(新修改列表)" +msgid "" +"

    %(note)s\n" +"\n" +"

    You may have disabled list delivery intentionally,\n" +" or it may have been triggered by bounces from your email\n" +" address. In either case, to re-enable delivery, change the\n" +" %(link)s option below. Contact %(mailto)s if you have any\n" +" questions or need assistance." +msgstr "" +"

    %(note)s\n" +"\n" +"

    你可能故意禁止了列表投递，或者被来自你的电子邮件地址的\n" +" 退信触发而禁止了。无论是哪一种情况，改变以下的 %(link)s 选\n" +" 项以便重新启动投递。如果您有任何问题，或者需要帮助，请联系\n" +" %(mailto)s。" + +msgid "" +"

    (Note that this is an umbrella list, intended to\n" +" have only other mailing lists as members. Among other things,\n" +" this means that your confirmation request will be sent to the\n" +" `%(sfx)s' account for your address.)" +msgstr "" +"

    (注意：这是一个掩护列表，用来将其他的邮件列表作为\n" +" 成员。在其他事务中，这意味着对您的地址，您的确认请求将被发送\n" +" 到`%(sfx)s'。)" + +msgid "

    (Send questions and comments to " +msgstr "

    (发送问题和评论到" + +msgid "" +"

    ... or select your entry from\n" +" the subscribers list (see above)." +msgstr "" +"

    ... or从订阅者列表(参考上文)中选择您的\n" +" 入口条目。" + +msgid "" +"

    To view more members, click on the appropriate\n" +" range listed below:" +msgstr "" +"

    想要查看更多的成员, 点击下面列出来的合适的区间:\n" +" " + +msgid "" +"

    Below is a listing of all the public mailing lists on\n" +" %(hostname)s. Click on a list name to get more information about\n" +" the list, or to subscribe, unsubscribe, and change the preferences\n" +" on your subscription." +msgstr "" +"

    下面是 %(hostname)s 上所有公开的列表地址.\n" +" 点击列表名称以获得关于该列表更多的信息,或者订阅,取消订阅,更改您订阅的偏好设置." + +msgid "" +"

    Below is the collection of publicly-advertised\n" +" %(mailmanlink)s mailing lists on %(hostname)s. Click on a list\n" +" name to visit the configuration pages for that list." +msgstr "" +"

    下面是 %(hostname)s 上公开的\n" +" %(mailmanlink)s 邮件列表。 点击一个列表\n" +" 名称可以访问此列表的配置页面" + +msgid "" +"

    There currently are no publicly-advertised\n" +" %(mailmanlink)s mailing lists on %(hostname)s." +msgstr "

    目前在 %(hostname)s 上没有公开的 %(mailmanlink)s 邮件列表." + +msgid "" +"

    There currently are no publicly-advertised %(mailmanlink)s\n" +" mailing lists on %(hostname)s." +msgstr "" +"

    目前在 %(hostname)s 上无公开的 %(mailmanlink)s\n" +" 邮件列表。" + +msgid "" +"

    We have received some recent bounces from your\n" +" address. Your current bounce score is %(score)s out of a\n" +" maximum of %(total)s. Please double check that your subscribed\n" +" address is correct and that there are no problems with delivery to\n" +" this address. Your bounce score will be automatically reset if\n" +" the problems are corrected soon." +msgstr "" +"

    我们已经接收到一些来自您的地址的新近的退信。\n" +" 您当前的退信数已经比最大限制 %(total)s 超过了 %(score)s。\n" +" 请仔细检查你用来订阅的地址是否正确并且可以正常使用。问题被纠正后，你\n" +" 的退信数将很快被自动重设。" + #. (para) msgid "Norman Walsh works for Sun Microsystems

    1 Network Drive, Building #2Burlington, MA01803
    ." msgstr "Norman Walsh works for Sun Microsystems
    1 Network Drive, Building #2Burlington, MA01803
    ." @@ -12998,6 +14189,33 @@ msgstr "Frobozz: it's not just for breakfast anymore." msgid "XHTML 1.0 The Extensible HyperText Markup Language" msgstr "XHTML 1.0 扩展的超文本标记语言" +msgid "Reply-To: header munging" +msgstr "Reply-To: header munging" + +msgid "" +"
    • Hold -- this holds the message for approval\n" +" by the list moderators.\n" +"\n" +"

    • Reject -- this automatically rejects the message by\n" +" sending a bounce notice to the post's author. The text of the\n" +" bounce notice can be configured by you.\n" +"\n" +"

    • Discard -- this simply discards the message, with\n" +" no notice sent to the post's author.\n" +"
    " +msgstr "" +"
    • 暂存 -- 这将暂存信件以待列表管理员审核。\n" +"\n" +"

    • 退回 -- 这将把信件自动退回发信者，并发送一封退信通知。\n" +" 退信通知的内容可以由您\n" +" 配置。\n" +"\n" +"

    • 丢弃 -- 这将简单的丢弃此信件，而不会向发信者发送任何的\n" +" 通知。\n" +"
    " + #. (para) msgid " shows the beginning of a refentry that illustrates one possible reference page: reference pagessample page" msgstr " 显示了 refentry，给出一个样例：参考页示例页" @@ -13513,6 +14731,9 @@ msgstr "不是第一个名字、姓或血统的人名组件" msgid "A component title in a table of contents" msgstr "目录中的标题组件" +msgid "A confirmation message has been sent to %(newaddr)s. " +msgstr "确认信息已经发送到了 %(newaddr)s ." + msgid "A conflict in the working copy obstructs the current operation" msgstr "工作副本中的冲突阻止了当前操作" @@ -13620,6 +14841,9 @@ msgstr "一个详细的消息集合，通常是错误消息" msgid "A device" msgstr "一个驱动器" +msgid "A digest has been sent." +msgstr "发送了一则摘要。" + #. (para) msgid "A directory" msgstr "目录" @@ -13908,6 +15132,9 @@ msgstr "一个每个条目都使用一个连续递增的标签标记的列表" msgid "A list item in a segmented list" msgstr "在分片列表中的列表项" +msgid "A list name is required" +msgstr "需要指定一个列表名" + #. (refpurpose) msgid "A list of s" msgstr " 列表" @@ -14275,6 +15502,9 @@ msgstr "在一个消息集中的一条消息的相关组件" msgid "A remark (or comment) intended for presentation in a draft manuscript" msgstr "用于在草稿稿子中的陈述的备注(或注释)" +msgid "A reminder of your password has been emailed to you." +msgstr "您的密码提示已经发送到您的电子信箱了" + msgid "A report cannot be generated because no data was supplied" msgstr "没有数据，无法产生报告" @@ -14636,6 +15866,9 @@ msgstr "在一个描述文档主题的条目组中的条目" msgid "A termdef must contain exactly one firstterm" msgstr "termdef 必须包含正确的第一个术语" +msgid "A terse phrase identifying this list." +msgstr "一个唯一标识该列表的简洁的短语。" + #. (refpurpose), (entry) msgid "A tertiary term in an index entry, rather than in the text" msgstr "在一个索引条目中的第三级条目，不同于在文本中。" @@ -14917,6 +16150,9 @@ msgstr "关于本书" msgid "Accel" msgstr "Accel" +msgid "Accept" +msgstr "接受" + #. Resource IDs: (82) msgid "Accept once" msgstr "仅接受一次" @@ -14925,6 +16161,9 @@ msgstr "仅接受一次" msgid "Accept permanently" msgstr "总是接受" +msgid "Accepts" +msgstr "接受" + msgid "Access repository via WebDAV protocol through serf." msgstr "使用 serf 库通过 WebDAV 协议访问版本库。" @@ -14937,6 +16176,9 @@ msgstr "不支持存取混合方案 (“%s”与“%s”)" msgid "Access to %1 was denied." msgstr "存取 %1 被拒绝。" +msgid "Acknowledge the member's posting" +msgstr "应答成员的邮件" + #. (title) msgid "Acknowledgements from Lenny" msgstr "致谢(Lenny)" @@ -14969,6 +16211,27 @@ msgstr "操作" msgid "Action log" msgstr "动作记录" +msgid "" +"Action to take for postings from non-members for which no\n" +" explicit action is defined." +msgstr "当一个没有被显式指定处理方法的非成员向列表发信时应执行的动作。" + +msgid "Action to take on all these held messages:" +msgstr "对所有这些滞留的信息的动作:" + +msgid "" +"Action to take when a message matches the content filtering\n" +" rules." +msgstr "当消息内容与内容过滤规则相符时过滤." + +msgid "" +"Action to take when a moderated member posts to the\n" +" list." +msgstr "当一个被节制的成员发信到列表时应该执行的动作。" + +msgid "Action:" +msgstr "动作" + #. Resource IDs: (117) msgid "Actions" msgstr "操作" @@ -15005,10 +16268,16 @@ msgstr "增加(替换)..." msgid "Add - TortoiseSVN" msgstr "增加 - TortoiseSVN" +msgid "Add %(esender)s to one of these sender filters:" +msgstr "把%(esender)s 加到这些发送过滤器中:" + #. Resource IDs: (563) msgid "Add Properties" msgstr "增加属性" +msgid "Add a non-fuzzy translation to the dictionary." +msgstr "向字典中加入一个准确的翻译。" + #. (para) msgid "Add an appropriate copyright notice for your modifications adjacent to the other copyright notices." msgstr "紧接着其它版权信息添加关于你的修改的恰当的版权信息。" @@ -15025,6 +16294,82 @@ msgstr "根据扩展名指定差异比较程序" msgid "Add extension specific merge program" msgstr "根据扩展名指定合并程序" +msgid "" +"Add members to a list from the command line.\n" +"\n" +"Usage:\n" +" add_members [options] listname\n" +"\n" +"Options:\n" +"\n" +" --regular-members-file=file\n" +" -r file\n" +" A file containing addresses of the members to be added, one\n" +" address per line. This list of people become non-digest\n" +" members. If file is `-', read addresses from stdin. Note that\n" +" -n/--non-digest-members-file are deprecated synonyms for this option.\n" +"\n" +" --digest-members-file=file\n" +" -d file\n" +" Similar to above, but these people become digest members.\n" +"\n" +" --welcome-msg=\n" +" -w \n" +" Set whether or not to send the list members a welcome message,\n" +" overriding whatever the list's `send_welcome_msg' setting is.\n" +"\n" +" --admin-notify=\n" +" -a \n" +" Set whether or not to send the list administrators a notification on\n" +" the success/failure of these subscriptions, overriding whatever the\n" +" list's `admin_notify_mchanges' setting is.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +" listname\n" +" The name of the Mailman list you are adding members to. It must\n" +" already exist.\n" +"\n" +"You must supply at least one of -r and -d options. At most one of the\n" +"files can be `-'.\n" +msgstr "" +"从命令行为邮件列表添加用户\n" +"\n" +"用法：\n" +" add_members [options] listname\n" +"\n" +"选项:\n" +"\n" +" --regular-members-file=file\n" +" -r file\n" +" 一个包含要被添加成员地址的文件,每行写一个地址.这些地址将成为非\n" +" 摘要成员.如果指定的文件为`-',将从标准输入读取地址.注意,不赞成使用\n" +" -n/--non-digest-members-file作为此选项的同义词.\n" +"\n" +" --digest-members-file=file\n" +" -d file\n" +" 和上面的选项累死,但是这些人将作为摘要成员.\n" +"\n" +" --welcome-msg=\n" +" -w \n" +" 设置是否向列表成员发送欢迎信息,覆盖列表的`send_welcome_msg'设置.\n" +"\n" +" --admin-notify=\n" +" -a \n" +" 设置对于成功/失败的订阅,是否向列表管理员发送通知,覆盖列表的\n" +" `admin_notify_mchanges'设置.\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息然后退出.\n" +"\n" +" listname\n" +" 您要添加成员的邮件列表.它必须是已经存在的.\n" +"\n" +"-r和-d选项您必须至少C指定一个.最多可以指定一个文件为`-'.\n" + #. (para) msgid "Add new attributes" msgstr "增加属性" @@ -15033,6 +16378,9 @@ msgstr "增加属性" msgid "Add new elements" msgstr "增加元素" +msgid "Add new item..." +msgstr "增加新选项" + #. Resource IDs: (13) msgid "Add to &ignore list" msgstr "增加到忽略列表(&I)" @@ -15048,6 +16396,9 @@ msgstr "增加/编辑针对扩展名的差异比较/合并工具" msgid "Added" msgstr "已增加" +msgid "Added : %(s)s" +msgstr "加入 : %(s)s" + #. Resource IDs: (126) msgid "Added a file remotely" msgstr "远程加入文件完成" @@ -15119,6 +16470,9 @@ msgstr "Addison-Wesley Publishing Company" msgid "Additional Constraints" msgstr "其它约束" +msgid "Additional Member Tasks" +msgstr "额外的成员任务" + #. (para) msgid "Additional attributes:" msgstr " 附加属性：" @@ -15131,14 +16485,41 @@ msgstr "出版物的封面的附加信息" msgid "Additional resources and a CD-ROM. Finally, we direct you to other places you can go for all the latest info, and offer a complete set of online documentation on the CD-ROM." msgstr "额外资源和 CD-ROM。最后，我们给出你可以在哪里找到全部最新信息，提供了 CD-ROM 中文档的完整在线版本。" +msgid "Additional settings" +msgstr "其他设定" + #. (para) msgid "Additional style information for downstream processing; typically the name of a style." msgstr "用于下游处理的附加样式信息，典型的是一个样式名称。" +msgid "Additionally, forward this message to: " +msgstr "另外，发送这条消息给:" + #. (tag) msgid "Address" msgstr "Address" +msgid "Address/name" +msgstr "地址/姓名" + +msgid "Address:" +msgstr "地址：" + +msgid "Addresses did not match!" +msgstr "地址不匹配!" + +msgid "" +"Addresses in this list are banned outright from subscribing\n" +" to this mailing list, with no further moderation required. Add\n" +" addresses one per line; start the line with a ^ character to\n" +" designate a regular expression match." +msgstr "" +"此清单中的地址被禁止订阅此邮件列表，而无须审核。每行添加一\n" +" 个地址；以 ^ 开头的行是一个正则表达式匹配。" + +msgid "Addresses may not be blank" +msgstr "地址不能为空" + #. Resource IDs: (582) msgid "Adds a new property" msgstr "增加新属性" @@ -15159,6 +16540,28 @@ msgstr "" "调整系统设置\n" "设置" +msgid "Admin address:" +msgstr "管理员地址：" + +msgid "Administrative requests for mailing list:" +msgstr "对邮件列表的管理请求" + +msgid "Administrator" +msgstr "管理员" + +msgid "Administrator passwords did not match" +msgstr "管理员密码不匹配" + +msgid "" +"Administrivia tests will check postings to see whether it's\n" +" really meant as an administrative request (like subscribe,\n" +" unsubscribe, etc), and will add it to the the administrative\n" +" requests queue, notifying the administrator of the new request,\n" +" in the process." +msgstr "" +"邮件检查会检查邮件看它是否真的是一个管理请求(像订阅，取消订阅，等)，\n" +"\t\t\t\t\t\t\t并把它加入到管理请求的队列中，通报管理员这一在进行之中的新的请求。" + #. (title) msgid "Admonitions" msgstr "忠告" @@ -15175,10 +16578,21 @@ msgstr "高级差异比较设置" msgid "Advanced merge settings" msgstr "高级合并设置" +msgid "" +"Advertise this list when people ask what lists are on this\n" +" machine?" +msgstr "在有人询问此主机上运行着哪些邮件列表时，显示此列表吗？" + #. (entry) msgid "Afrikaans" msgstr "荷兰语" +msgid "After content filtering, the message was empty" +msgstr "经过内容过滤后，该信件为空" + +msgid "Again to confirm password: " +msgstr "确认口令" + #. Resource IDs: (65535) msgid "Age" msgstr "年代" @@ -15203,6 +16617,11 @@ msgstr "Alaska" msgid "Alfred V." msgstr "Alfred V." +msgid "" +"Alias names (regexps) which qualify as explicit to or cc\n" +" destination names for this list." +msgstr "明确指明此列表的to或者cc地址的别名(正则表达式)。" + #. (para) msgid "Align text around a specific character. If a user agent doesn't support character alignment, behavior in the presence of this value is unspecified." msgstr "对齐文本围线一个特定的字符。如果一个用户代理不支持字符对齐方式，在当前这个值中的行为是未指明的。" @@ -15314,6 +16733,9 @@ msgstr "所有：" msgid "All or none of:" msgstr "全选或不选：" +msgid "All runs all the above qrunners" +msgstr "All 运行上面的所有qrunners" + #. (para) msgid "All user-interface components must be descendants of the Widget class." msgstr "All user-interface components must be descendants of the Widget class." @@ -15322,6 +16744,45 @@ msgstr "All user-interface components must be descendants of the Widg msgid "Allow multiple selections" msgstr "允许多选" +msgid "Already a member" +msgstr "已经是成员了" + +msgid "Already a member: %(member)s" +msgstr "已经是成员：%(member)s" + +msgid "Also delete archives?" +msgstr "同时删除邮件归档？" + +msgid "" +"Alternate addresses that are acceptable when\n" +" `require_explicit_destination' is enabled. This option takes a\n" +" list of regular expressions, one per line, which is matched\n" +" against every recipient address in the message. The matching is\n" +" performed with Python's re.match() function, meaning they are\n" +" anchored to the start of the string.\n" +" \n" +"

    For backwards compatibility with Mailman 1.1, if the regexp\n" +" does not contain an `@', then the pattern is matched against just\n" +" the local part of the recipient address. If that match fails, or\n" +" if the pattern does contain an `@', then the pattern is matched\n" +" against the entire recipient address.\n" +" \n" +"

    Matching against the local part is deprecated; in a future\n" +" release, the pattern will always be matched against the entire\n" +" recipient address." +msgstr "" +"`require_explicit_destination'选项打开时的\n" +" 其他可接受地址。可以在每行指定一个正则表达式，用来匹配信件中的\n" +" 所有目的地址。正则表达式匹配是用Python的re.match()函数实现的，\n" +" 这意味着匹配是从字符串的开头开始进行的。\n" +" \n" +"

    为了与Mailman 1.1保持向后兼容，如果正则表达式中不包括字符'@'，\n" +" 那么它将仅与收件地址的本地部分进行匹配。如果匹配失败，或者此\n" +" 正则表达式中含有字符'@'的话，它将会与整个收件地址进行匹配。\n" +" \n" +"

    不赞成与本地部分进行匹配；在未来的版本中，这里指定的正则表达式\n" +" 模式将总是与完整的收件地址进行匹配。" + #. (refpurpose) msgid "Alternative steps in a procedure" msgstr "在过程(procedure)中的可选步骤" @@ -15330,6 +16791,9 @@ msgstr "在过程(procedure)中的可选步骤" msgid "Alternatively, for relatively simple equations such as Fermat's Last Theorem, mathphrase is often sufficient:" msgstr "可选的，对于相关的简单的等式如 Fermat's Last Theorem，mathphrase通常已经足够了：" +msgid "Always" +msgstr "始终" + #. Resource IDs: (197) msgid "Always use the system locale settings to show times and dates" msgstr "始终使用系统区域设置显示时间和日期" @@ -15442,6 +16906,13 @@ msgstr "orgname 标识了一个组织或公司的名称" msgid "An Example Procedure" msgstr "过程例子" +msgid "" +"An HTML attachment was scrubbed...\n" +"URL: %(url)s\n" +msgstr "" +"一个HTML附件被移除...\n" +"URL: %(url)s\n" + #. (refpurpose) msgid "An HTML form" msgstr "HTML 表单" @@ -15590,6 +17061,29 @@ msgstr "在杂志和其它期刊中的文章。" msgid "An attempt to provide a detailed description of all of the SGML/XML tools available is outside the scope of this book." msgstr "试图提供所有可用的 SGML/XML 工具的详细介绍已超出了本书的范围。" +msgid "" +"An attempt was made to subscribe your address to the mailing list\n" +"%(listaddr)s. You are already subscribed to this mailing list.\n" +"\n" +"Note that the list membership is not public, so it is possible that a bad\n" +"person was trying to probe the list for its membership. This would be a\n" +"privacy violation if we let them do this, but we didn't.\n" +"\n" +"If you submitted the subscription request and forgot that you were already\n" +"subscribed to the list, then you can ignore this message. If you suspect that\n" +"an attempt is being made to covertly discover whether you are a member of this\n" +"list, and you are worried about your privacy, then feel free to send a message\n" +"to the list administrator at %(listowner)s.\n" +msgstr "" +"有人尝试用您的地址订阅邮件列表 %(listaddr)s。您已经订阅了此列表。\n" +"\n" +"注意，列表成员不是公开的，所以可能是有些不怀好意的人在试探列表的成员地址。\n" +"我们不会让他们得逞，因为这样他们将侵犯您的隐私。\n" +"\n" +"如果您忘记了您已经订阅了此列表，所以又提交了此订阅请求的话，您可以忽略此信息。\n" +"如果您认为这是对判断您是否是此列表成员的一次秘密试探，并且担心这将暴露您的隐私，\n" +"请不要拘束，发送一封邮件到 %(listowner)s 告诉列表管理员。\n" + #. (para) msgid "An attribute" msgstr "属性" @@ -15856,6 +17350,16 @@ msgstr "一本介绍 XML 的书。" msgid "An introductory book, but not a simple one." msgstr "一部介绍性的书，但不简单。" +msgid "" +"An introductory description - a few paragraphs - about the\n" +" list. It will be included, as html, at the top of the listinfo\n" +" page. Carriage returns will end a paragraph - see the details\n" +" for more info." +msgstr "" +"关于列表的介绍性的描述 - 几个段落。\n" +" 它将作为html片段包含在列表信息页面的顶部\n" +" 回车将结束一个段落 - 更多信息看细节。" + #. (refpurpose), (entry) msgid "An often pronounceable word made from the initial (or selected) letters of a name or phrase" msgstr "由名词或短语的第一个(或选择的)字母组成的通常可发音的单词。" @@ -15970,6 +17474,9 @@ msgstr "可以从列表中选择任意数量。没有顺序和次数的约束" msgid "Any number of selections, including none, can be made from the list. Selections can be made in any order, without restriction on order or number of occurrences." msgstr "可以从列表中选择任意数量，包括不选。没有顺序和次数的约束。" +msgid "Anyone" +msgstr "任何人" + msgid "Apache got a malformed URI" msgstr "Apache 得到非法 URI" @@ -16123,6 +17630,21 @@ msgstr "已经激活 Apply-textdelta" msgid "Apply-textdelta not active" msgstr "没有激活 Apply-textdelta" +msgid "Approve" +msgstr "批准" + +msgid "Apr" +msgstr "四月" + +msgid "April" +msgstr "四月" + +msgid "Archive messages?" +msgstr "存档消息吗?" + +msgid "Archiving Options" +msgstr "存档选项" + msgid "Are all the targets part of the same working copy?" msgstr "是否所有目标都属于同一工作副本？" @@ -16179,6 +17701,9 @@ msgstr "Arkansas" msgid "Arrange &Vertical" msgstr "垂直排列(&V)" +msgid "As needed" +msgstr "根据需要" + #. (para) msgid "As of July 1998, responsibility for the advancement and maintenance of the DocBook DTD has been transferred from the Davenport Group, which originated it, to the DocBook Technical Committee of OASIS (Organization for the Advancement of Structured Information Standards) at http://www.oasis-open.org/." msgstr "1998年7月，改进和维护 DocBook DTD 的职责从发起者 Davenport Group 转移到了 OASIS(结构化信息标准促进组织 http://www.oasis-open.org/) 的 DocBook 技术委员会。" @@ -16387,6 +17912,12 @@ msgstr "属性" msgid "Attributes:" msgstr "属性：" +msgid "Aug" +msgstr "八月" + +msgid "August" +msgstr "八月" + #. Resource IDs: (131, 160) msgid "Authentication" msgstr "认证" @@ -16402,6 +17933,9 @@ msgstr "服务器报告认证错误: %s" msgid "Authentication failed" msgstr "认证失败" +msgid "Authentication failed." +msgstr "认证失败" + #, c-format msgid "Authentication realm: %s\n" msgstr "认证领域: %s\n" @@ -16424,6 +17958,9 @@ msgstr "作者： Stefan Kueng" msgid "Authorization failed" msgstr "认证失败" +msgid "Authorization failed." +msgstr "认证失败" + #. Resource IDs: (116) msgid "Authors" msgstr "作者" @@ -16466,6 +18003,55 @@ msgid "" "from the files that you have changed as you type a log message." msgstr "输入日志信息时，根据所修改的文件自动完成建议词（通常是类或成员名称）。" +msgid "Auto-discard notification" +msgstr "自动丢弃通知" + +msgid "Auto-generate initial list password?" +msgstr "自动生成列表初始密码吗?" + +msgid "Auto-responder" +msgstr "自动回复器" + +msgid "" +"Auto-responder characteristics.

    \n" +"\n" +"In the text fields below, string interpolation is performed with\n" +"the following key/value substitutions:\n" +"

      \n" +"
    • listname - gets the name of the mailing list\n" +"
    • listurl - gets the list's listinfo URL\n" +"
    • requestemail - gets the list's -request address\n" +"
    • owneremail - gets the list's -owner address\n" +"
    \n" +"\n" +"

    For each text field, you can either enter the text directly into the text\n" +"box, or you can specify a file on your local system to upload as the text." +msgstr "" +"自动回复器特征.

    \n" +"\n" +"在下面的文字域内将执行如下的键/值替换:\n" +"

      \n" +"
    • listname - 得到邮件列表的名字\n" +"
    • listurl - 得到列表的信息页URL\n" +"
    • requestemail - 得到列表的请求地址\n" +"
    • owneremail - 得到列表的主人地址\n" +"
    \n" +"\n" +"

    在每个文字域内,您可以直接向文本框中键入文本也可以指定一个本地文件, 上传后\n" +"作为相应的文本." + +msgid "Auto-response for your message to the \"%(realname)s\" mailing list" +msgstr "对您发送至 \"%(realname)s\" 邮件列表信件的自动答复" + +msgid "Auto-response text to send to -owner emails." +msgstr "向列表所有者发送的自动回复文本." + +msgid "Auto-response text to send to -request emails." +msgstr "向请求邮件发送的自动回复文本." + +msgid "Auto-response text to send to mailing list posters." +msgstr "向邮件列表发言者发送的自动回复文本." + #. Resource IDs: (438) msgid "Automatic" msgstr "自动" @@ -16478,6 +18064,9 @@ msgstr "每周都自动检查新版本(&N)" msgid "Average" msgstr "平均" +msgid "Awaiting moderator approval" +msgstr "等待列表主持者的批准" + #. (member) msgid "B" msgstr "B" @@ -16486,13 +18075,52 @@ msgstr "B" msgid "B&rowse..." msgstr "浏览(&R)..." +msgid "Bad --digest option: %(kind)s" +msgstr "错误的 --digest 选项： %(kind)s" + +msgid "Bad --nomail option: %(why)s" +msgstr "错误的 --nomail 选项： %(why)s" + #. (title) msgid "Bad Entity Reference" msgstr "错误的实体引用" +msgid "Bad MIME type ignored: %(spectype)s" +msgstr "被忽略的错误的MIME类型：%(spectype)s" + msgid "Bad URL passed to RA layer" msgstr "传递至 RA 层的 URL 错误" +msgid "Bad URL specification" +msgstr "错误的URL细则" + +msgid "Bad approval password given. Held message is still being held." +msgstr "错误的核准口令。保存的信息仍然被保存着。" + +msgid "Bad argument to -a/--admin-notify: %(arg)s" +msgstr "-a/--admin-notify选项的错误参数: %(arg)s" + +msgid "Bad argument to -w/--welcome-msg: %(arg)s" +msgstr "-w/--welcome-msg选项的错误参数: %(arg)s " + +msgid "Bad argument: %(arg)s" +msgstr "错误的参数: %(arg)s" + +msgid "Bad arguments: %(pargs)s" +msgstr "参数错误: %(pargs)s" + +msgid "Bad arguments: %(strargs)s" +msgstr "错误的参数： %(strargs)s" + +msgid "Bad choice: %(yesno)s" +msgstr "错误的选择: %(yesno)s" + +msgid "Bad command: %(command)s" +msgstr "错误命令: %(command)s" + +msgid "Bad confirmation string" +msgstr "错误的验证字符串" + msgid "Bad copyfrom arguments received" msgstr "接收到非法的 copyfrom 参数" @@ -16504,6 +18132,18 @@ msgstr "不正确的数据库版本: 用 %d.%d.%d 版本编译，正在运行版 msgid "Bad database version: got %d.%d.%d, should be at least %d.%d.%d" msgstr "不正确的数据库版本: 得到 %d.%d.%d，应该最低是 %d.%d.%d" +msgid "Bad digest specifier: %(arg)s" +msgstr "指定了错误的分类: %(arg)s" + +msgid "Bad email address for option %(k)s: %(v)s" +msgstr "选项 %(k)s 的email地址错误： %(v)s" + +msgid "Bad email address for option %(property)s: %(val)s" +msgstr "错误的邮件地址选项%(property)s: %(val)s" + +msgid "Bad email address provided" +msgstr "提供了错误的邮件地址" + msgid "Bad encoding option: prop value not stored as UTF8" msgstr "不良编码选项: 属性取值未以 UTF8 储存" @@ -16514,6 +18154,12 @@ msgstr "错误的合并；初始，原始，目标不在同一个文件系统" msgid "Bad merge; target '%s' has id '%s', same as ancestor" msgstr "错误的合并: 目标“%s”拥有标识“%s”，与初始相同" +msgid "Bad moderation flag value" +msgstr "错误的节制标记变量" + +msgid "Bad owner email address: %(s)s" +msgstr "错误的拥有者邮件地址: %(s)s " + msgid "Bad parent pool passed to svn_make_pool()" msgstr "无效的父内存池传递到 svn_make_pool()" @@ -16524,9 +18170,52 @@ msgstr "属性名称错误" msgid "Bad property name: '%s'" msgstr "属性名称错误: “%s”" +msgid "Bad queue directory: %(qdir)s" +msgstr "队列目录错误： %(qdir)s" + +msgid "Bad regular expression: " +msgstr "错误的正则表达式" + +msgid "Bad set command: %(subcmd)s" +msgstr "错误的设置命令: %(subcmd)s" + +msgid "Bad status number: %(arg)s" +msgstr "错误的状态号： %(arg)s" + msgid "Bad type indicator" msgstr "错误的类型指示器" +msgid "" +"Bad value for %(property)s: %(val)s" +msgstr "" +"以下变量被赋予非法值:%(property)s: %(val)s" + +msgid "Bad/Invalid email address" +msgstr "错误/无效的邮件地址" + +msgid "Bad/Invalid email address: %(member)s" +msgstr "错误/不合法的邮件地址： %(member)s" + +msgid "Bad/Invalid email address: blank line" +msgstr "错误/不合法的邮件地址: 空行" + +msgid "" +"Badly formed options entry:\n" +" %(record)s" +msgstr "" +"错误形式选项入口:\n" +" %(record)s" + +msgid "" +"Ban %(esender)s from ever subscribing to this\n" +" mailing list" +msgstr "禁止 %(esender)s 订阅这个列表" + +msgid "Ban list" +msgstr "黑名单" + #. Resource IDs: (246) msgid "Bar Graph" msgstr "柱状图" @@ -16556,6 +18245,9 @@ msgstr "SGML/XML 的基本概念" msgid "Basque" msgstr "巴斯克语" +msgid "Batched-delivery digest characteristics." +msgstr "打包投递摘要的特性" + #. (para) msgid "Because XML does not require them, and because system identifiers are required, XML tools may not provide adequate support for public identifiers. To work with these systems you must use system identifiers." msgstr "因为 XML 不需要它们，而系统标识符又是必需的，XML 工具可能不能对公共标识符提供足够的支持。为了在这些系统上工作，你必须使用系统标识符。" @@ -16572,6 +18264,14 @@ msgstr "北京" msgid "Bell Telephone Laboratories, Inc." msgstr "Bell Telephone Laboratories, Inc." +msgid "" +"Below, enter additional text to be added to the\n" +" top of your invitation or the subscription notification. Include at least\n" +" one blank line at the end..." +msgstr "" +"下面, 在您的邀请或者订阅通知的头部中添加附加文字.\n" +" 结尾至少包含一个空白行..." + msgid "Berkeley DB deadlock error" msgstr "BDB 死锁" @@ -16614,6 +18314,14 @@ msgstr "列出文件每一行的作者" msgid "Blend Alpha" msgstr "Alpha 混和" +msgid "" +"Blind carbon copies or other implicit destinations are\n" +"not allowed. Try reposting your message by explicitly including the list\n" +"address in the To: or Cc: fields." +msgstr "" +"不允许收信人的地址空白或者不清晰\n" +"请尝试在To:和Cc:字段写明地址后重新发送" + #. (title) msgid "Block Elements" msgstr "块元素" @@ -16687,6 +18395,15 @@ msgstr "" "同时指定了 /logmsg 和 /logmsgfile !\n" "它们只能指定一个。" +msgid "Bounce action notification" +msgstr "退信行为通告" + +msgid "Bounce detection sensitivity" +msgstr "退信检测灵敏度" + +msgid "Bounce processing" +msgstr "退信处理" + #. Resource IDs: (1003) msgid "Br&owse..." msgstr "浏览(&O)..." @@ -16880,6 +18597,54 @@ msgstr "但是一定不能以它自己的文档类型声明开始：" msgid "But the limited constraints that can be expressed in DTDs mean that the resulting document may or may not really be valid DocBook V5.0. The normative schema for DocBook V5.0 is the RELAX NG Grammar with its Schematron annotations." msgstr "但是由于 DTD 的约束有限，导致结果文档可能是，也可能不是真正的有效的 DocBook V5.0。DocBook V5.0 的标准方案是 RELAX NG 语法和方案注释。" +msgid "" +"By clicking on the Remind button, your\n" +" password will be emailed to you." +msgstr "通过点击提示按钮，您的口令将被邮寄给您。" + +msgid "" +"By clicking on the Unsubscribe button, a\n" +" confirmation message will be emailed to you. This message will have a\n" +" link that you should click on to complete the removal process (you can\n" +" also confirm by email; see the instructions in the confirmation\n" +" message)." +msgstr "" +"通过点击退订按钮，一封确认函将被投递给您。\n" +" 您需要点击确认函中的一个链接来完成整个退订过程(您也可以通过邮件来确认，\n" +" 请参考确认函中的具体信息)。" + +msgid "By default, should new list member postings be moderated?" +msgstr "默认情况下，列表新成员的信件是否被暂存？" + +msgid "" +"By setting this value to No, you disable all\n" +" automatic bounce processing for this list, however bounce\n" +" messages will still be discarded so that the list administrator\n" +" isn't inundated with them." +msgstr "" +"把这个值设置为,否则设为, 你就禁止了这个列表所有的\n" +" 自动退信处, 然而为了使列表管理员免于被退信消息淹没, 它们\n" +" 仍然会被忽略" + +msgid "" +"By setting this value to No, you turn off\n" +" notification messages that are normally sent to the list owners\n" +" when a member is unsubscribed due to excessive bounces. An\n" +" attempt to notify the member will always be made." +msgstr "" +"把这个值设置成否, 你就关闭了当一个用户由于\n" +" 过多的退信而被退订时,通常发向列表所有者的通知消息的服务. 但系统总是尝\n" +" 试通知将被禁止的用户." + +msgid "" +"By setting this value to No, you turn off\n" +" notification messages that are normally sent to the list owners\n" +" when a member's delivery is disabled due to excessive bounces.\n" +" An attempt to notify the member will always be made." +msgstr "" +"把这个值设置成否, 你就关闭了一个通知服务，该服务用于在某一个用户\n" +"因为过多的退信而将被暂时禁止时通知列表属主. 但系统总是尝试通知将被禁止的用户." + #. (para) msgid "By the same token, this example is not valid because there is no expansion of the content model that can match it:" msgstr "对于同样的令牌，下面这个例子是无效的，因为没有内容模型的展开可以匹配它：" @@ -16921,6 +18686,9 @@ msgstr "CATALOG" msgid "CATALOG \"docbook/3.1/catalog\"" msgstr "CATALOG \"docbook/3.1/catalog\"" +msgid "CGI script error" +msgstr "CGI脚本错误" + #. (screen) #, no-wrap msgid "" @@ -17001,10 +18769,18 @@ msgstr "可以被用于指定将被保留的在修饰成分中的空白(例如 msgid "Can double-click in log list to compare with previous revision" msgstr "可以在日志列表中的一个版本上双击，与选定的版本比较" +msgid "Can list members choose to receive list traffic bunched in digests?" +msgstr "列表成员可以选择接收打包成摘要的列表通讯吗？" + #. (para) msgid "Can not be repeated." msgstr "不能重复。" +msgid "" +"Can subscribers choose to receive mail immediately, rather\n" +" than in batched digests?" +msgstr "订阅者可否选择即时收信而不是收取摘要？" + #, c-format msgid "Can't accept client connection" msgstr "无法接受客户连接" @@ -17317,6 +19093,9 @@ msgstr "不能获取FSFS版本库互斥体" msgid "Can't grab FSFS txn list mutex" msgstr "不能获取文件系统事务列表互斥体" +msgid "Can't have empty html page." +msgstr "不能有空的html页面." + #, c-format msgid "Can't hide directory '%s'" msgstr "无法隐藏目录“%s”" @@ -17610,6 +19389,18 @@ msgstr "无法写入流" msgid "Cancel" msgstr "取消" +msgid "Cancel and discard" +msgstr "取消并且删除" + +msgid "Cancel held message posting" +msgstr "取消对滞留信件的发送" + +msgid "Cancel my subscription request" +msgstr "取消我的订阅请求" + +msgid "Cancel posting" +msgstr "取消发送" + #. Resource IDs: (132) msgid "Cancelling TortoiseSVN Blame..." msgstr "正在取消 SVN 追溯..." @@ -17708,6 +19499,15 @@ msgstr "无法协商认证机制" msgid "Cannot non-recursively commit a directory deletion" msgstr "无法以非递归提交方式删除目录" +msgid "Cannot open mbox file %(mbox)s: %(msg)s" +msgstr "无法打开mbox文件 %(mbox)s: %(msg)s" + +msgid "Cannot read address file: %(filename)s: %(msg)s" +msgstr "无法读出地址文件: %(filename)s: %(msg)s" + +msgid "Cannot read both digest and normal members from standard input." +msgstr "无法从标准输入既读取摘要用户又读取正常用户 " + #, c-format msgid "Cannot read entry for '%s'" msgstr "不能读“%s”的条目" @@ -17782,6 +19582,16 @@ msgstr "移动操作不能指定版本" msgid "Cannot unlock path '%s', no authenticated username available" msgstr "不能解除路径“%s”的锁定，没有可用的已授权用户名" +msgid "" +"Cannot unshunt message %(filebase)s, skipping:\n" +"%(e)s" +msgstr "" +"不能恢复消息 %(filebase)s, 忽略:\n" +"%(e)s" + +msgid "Cannot unsubscribe non-members:" +msgstr "不能取消非成员的订阅:" + msgid "Cannot use --username or --password with any of --source-username, --source-password, --sync-username, or --sync-password.\n" msgstr "不能将 --username 或 --password 与 --source-username, --source-password, --sync-username, 或 --sync-password 一起使用。\n" @@ -17838,6 +19648,9 @@ msgstr "捕捉到信号" msgid "Cease invocation of this API" msgstr "停止调用此 API" +msgid "Ceiling on acceptable number of recipients for a posting." +msgstr "信件收件人的最大数目。" + #. (para) msgid "Cell data is centered vertically within the cell. This is the default value." msgstr "单元格数据在一个单元格垂直方向上居中。这是默认值。" @@ -17902,6 +19715,107 @@ msgstr "凭证尚未生效。起始日期：%s" msgid "Certificates|*.p12;*.pkcs12;*.pfx|All|*.*||" msgstr "凭证|*.p12;*.pkcs12|所有文件|*.*||" +msgid "Change My Address and Name" +msgstr "修改我的地址和姓名" + +msgid "Change My Password" +msgstr "修改我的口令" + +msgid "" +"Change a list's password.\n" +"\n" +"Prior to Mailman 2.1, list passwords were kept in crypt'd format -- usually.\n" +"Some Python installations didn't have the crypt module available, so they'd\n" +"fall back to md5. Then suddenly the Python installation might grow a crypt\n" +"module and all list passwords would be broken.\n" +"\n" +"In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n" +"form. This breaks list passwords for all existing pre-Mailman 2.1 lists, and\n" +"since those passwords aren't stored anywhere in plain text, they cannot be\n" +"retrieved and updated.\n" +"\n" +"Thus, this script generates new passwords for a list, and optionally sends it\n" +"to all the owners of the list.\n" +"\n" +"Usage: change_pw [options]\n" +"\n" +"Options:\n" +"\n" +" --all / -a\n" +" Change the password for all lists.\n" +"\n" +" --domain=domain\n" +" -d domain\n" +" Change the password for all lists in the virtual domain `domain'. It\n" +" is okay to give multiple -d options.\n" +"\n" +" --listname=listname\n" +" -l listname\n" +" Change the password only for the named list. It is okay to give\n" +" multiple -l options.\n" +"\n" +" --password=newpassword\n" +" -p newpassword\n" +" Use the supplied plain text password `newpassword' as the new password\n" +" for any lists that are being changed (as specified by the -a, -d, and\n" +" -l options). If not given, lists will be assigned a randomly\n" +" generated new password.\n" +"\n" +" --quiet / -q\n" +" Don't notify list owners of the new password. You'll have to have\n" +" some other way of letting the list owners know the new password\n" +" (presumably out-of-band).\n" +"\n" +" --help / -h\n" +" Print this help message and exit.\n" +msgstr "" +"修改列表的口令。\n" +"\n" +"在Mailman 2.1以前，列表的口令一般以加密格式保存。一些Python安装并没有附带加\n" +"密模块，这样的话将会退而使用md5。如果这些Python安装突然添加了加密模块的话，\n" +"所有的列表口令都将被破坏。\n" +"\n" +"在Mailman 2.1中，所有的列表和站点口令都是以SHA1 hexdigest形式存储的。这破坏\n" +"了所有Mailman 2.1之前建立的列表的口令，同时，由于这些口令并不是以明文形式存\n" +"放的，它们也将不能被取回或更新。\n" +"\n" +"此脚本用来为列表生成新的口令，并且可以选择将新口令发送给列表的所有管理员。\n" +"\n" +"用法： change_pw [options]\n" +"\n" +"选项:\n" +"\n" +" --all / -a\n" +" 修改所有列表的口令。\n" +"\n" +" --domain=domain\n" +" -d domain\n" +" 在虚拟域'domain'中修改所有列表的口令。可以指定多个-d选项。\n" +"\n" +" --listname=listname\n" +" -l listname\n" +" 为指定的列表修改口令。可以指定多个-l选项。\n" +"\n" +" --password=newpassword\n" +" -p newpassword\n" +" 使用指定的明文口令'newpassword'作为需要修改口令的列表(由-a,-d和-l指定\n" +" )的新口令。如果不给出此选项的话，列表将被指派一个随即产生的新口令。\n" +"\n" +" --quiet / -q\n" +" 不通知列表管理员列表的新口令。您需要有其他的方法来让列表管理员知道新口令\n" +"\n" +" --help / -h\n" +" 打印此帮助信息然后退出。\n" + +msgid "Change address" +msgstr "更改地址" + +msgid "Change list ownership passwords" +msgstr "更改列表拥有者的密码" + +msgid "Change of address request confirmed" +msgstr "对地址请求的修改已经确认" + #. (para) msgid "Change the structure of existing elements" msgstr "改变现有元素的组织结构" @@ -17963,6 +19877,9 @@ msgstr "变更列表（双击文件查看差异）：" msgid "Changing Role on Procedure" msgstr "改变程序分类" +msgid "Changing passwords for list: %(listname)s" +msgstr "为列表 %(listname)s改变密码" + #. (title) msgid "Changing the Localization" msgstr "改变区域" @@ -17995,6 +19912,67 @@ msgstr "检查更新" msgid "Check For Updates..." msgstr "检查更新..." +msgid "" +"Check a list's config database file for integrity.\n" +"\n" +"All of the following files are checked:\n" +"\n" +" config.pck\n" +" config.pck.last\n" +" config.db\n" +" config.db.last\n" +" config.safety\n" +"\n" +"It's okay if any of these are missing. config.pck and config.pck.last are\n" +"pickled versions of the config database file for 2.1a3 and beyond. config.db\n" +"and config.db.last are used in all earlier versions, and these are Python\n" +"marshals. config.safety is a pickle written by 2.1a3 and beyond when the\n" +"primary config.pck file could not be read.\n" +"\n" +"Usage: %(PROGRAM)s [options] [listname [listname ...]]\n" +"\n" +"Options:\n" +"\n" +" --all / -a\n" +" Check the databases for all lists. Otherwise only the lists named on\n" +" the command line are checked.\n" +"\n" +" --verbose / -v\n" +" Verbose output. The state of every tested file is printed.\n" +" Otherwise only corrupt files are displayed.\n" +"\n" +" --help / -h\n" +" Print this text and exit.\n" +msgstr "" +"检查列表配置数据库的完整性。\n" +"\n" +"下面的所有文件都将被检查：\n" +"\n" +" config.pck\n" +" config.pck.last\n" +" config.db\n" +" config.db.last\n" +" config.safety\n" +"\n" +"这些文件中的任意一个都可以缺失。config.pck和config.pck.last是2.1a3及之后版本\n" +"配置文件的备份。config.db和config.db.last是所有之前版本使用的配置文件，它们是\n" +"Python的配置(marshals)。config.safety是当2.1a3及之后版本的主配置文件config.pck\n" +"读取时使用的备份文件(pickle)。\n" +"\n" +"用法: %(PROGRAM)s [options] [listname [listname ...]]\n" +"\n" +"选项：\n" +"\n" +" --all / -a\n" +" 检查所有列表的数据库。否则只有在命令行上指定的列表才会被检查。\n" +"\n" +" --verbose / -v\n" +" 冗余输出。每一个被检查的文件的状态都将被打印。否则只有损坏的文件的状态\n" +" 才会被打印。\n" +"\n" +" --help / -h\n" +" 打印此帮助信息然后退出。\n" + #. Resource IDs: (13) msgid "Check for modi&fications" msgstr "检查更新(&F)" @@ -18003,6 +19981,25 @@ msgstr "检查更新(&F)" msgid "Check for modifications" msgstr "检查更新" +msgid "" +"Check for pending admin requests and mail the list owners if necessary.\n" +"\n" +"Usage: %(PROGRAM)s [options]\n" +"\n" +"Options:\n" +"\n" +" -h/--help\n" +" Print this message and exit.\n" +msgstr "" +"查看阻塞的管理请求，在必要时向列表主人发送邮件。\n" +"\n" +"用法： %(PROGRAM)s [options]\n" +"\n" +"选项：\n" +"\n" +" -h/--help\n" +" 打印此帮助信息然后退出。\n" + #. Resource IDs: (9) msgid "Check out a working copy from a repository" msgstr "从版本库中检出工作副本" @@ -18081,6 +20078,23 @@ msgstr "" msgid "Check the path and/or URL you've entered." msgstr "请检查你输入的路径或 URL。" +msgid "" +"Check the permissions for the Mailman installation.\n" +"\n" +"Usage: %(PROGRAM)s [-f] [-v] [-h]\n" +"\n" +"With no arguments, just check and report all the files that have bogus\n" +"permissions or group ownership. With -f (and run as root), fix all the\n" +"permission problems found. With -v be verbose.\n" +msgstr "" +"检查Mailman安装的文件许可权。\n" +"\n" +"用法： %(PROGRAM)s [-f] [-v] [-h]\n" +"\n" +"不指定参数时，仅检查和报告有虚假许可权或者所属组不正确的文件。\n" +"指定-f选项(以root身份运行)时，修复所有被发现的许可权问题。\n" +"指定-v选项将导致冗余输出。\n" + #. Resource IDs: (194) msgid "Check those menu entries you want to appear in the top context menu instead of the TortoiseSVN submenu" msgstr "选中你希望出现在右键菜单，二不是 TortoiseSVN 子菜单中的菜单项" @@ -18229,10 +20243,16 @@ msgstr "Chet" msgid "Children" msgstr "子节点" +msgid "Chinese (China)" +msgstr "中文（中国）" + #. (entry) msgid "Chinese (Continental)" msgstr "汉语" +msgid "Chinese (Taiwan)" +msgstr "中文（台湾）" + #. (entry) msgid "Chinese (Traditional)" msgstr "汉语(繁体)" @@ -18261,6 +20281,62 @@ msgstr "CiteTitle" msgid "ClassName" msgstr "ClassName" +msgid "" +"Clean up an .mbox archive file.\n" +"\n" +"The archiver looks for Unix-From lines separating messages in an mbox archive\n" +"file. For compatibility, it specifically looks for lines that start with\n" +"\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n" +"everything else on the line.\n" +"\n" +"Normally, any lines that start \"From \" in the body of a message should be\n" +"escaped such that a > character is actually the first on a line. It is\n" +"possible though that body lines are not actually escaped. This script\n" +"attempts to fix these by doing a stricter test of the Unix-From lines. Any\n" +"lines that start \"From \" but do not pass this stricter test are escaped with a\n" +"> character.\n" +"\n" +"Usage: cleanarch [options] < inputfile > outputfile\n" +"Options:\n" +" -s n\n" +" --status=n\n" +" Print a # character every n lines processed\n" +"\n" +" -q / --quiet\n" +" Don't print changed line information to standard error.\n" +"\n" +" -n / --dry-run\n" +" Don't actually output anything.\n" +"\n" +" -h / --help\n" +" Print this message and exit\n" +msgstr "" +"清除.mbox存档文件。\n" +"\n" +"存档器搜寻用来在mbox存档文件中分隔信件(messages)的Unix-From行。为兼容起见，\n" +"它明确地寻找以\"From \"开头的行 -- 即，大写字母F，小写字母r，o，m，空格，忽略此行中\n" +"其他的所有字符。\n" +"\n" +"一般来说，信件正文中以\"From \"开头的行都应该在行首使用字符'>'来转义。但是\n" +"也有可能正文中的那些行并没有被转义。此脚本试图通过对Unix-From行做严格的测试\n" +"以解决这些问题，任何以\"From \"开头但是没有通过此严格测试的行都将被用一个'>'\n" +"字符转义。\n" +"\n" +"用法： cleanarch [options] < inputfile > outputfile\n" +"选项：\n" +" -s n\n" +" --status=n\n" +" 每处理完n行打印一个#字符\n" +"\n" +" -q / --quiet\n" +" 不向标准错误打印已修改行的信息\n" +"\n" +" -n / --dry-run\n" +" 不输出任何信息\n" +"\n" +" -h / --help\n" +" 打印此帮助信息并退出\n" + #. Resource IDs: (146) msgid "Cleaning up." msgstr "正在清除。" @@ -18291,6 +20367,12 @@ msgstr "清理未完成的操作，锁定文件等…" msgid "Clear" msgstr "清除" +msgid "Clear Form" +msgstr "清除表格" + +msgid "Clear this member's moderate flag" +msgstr "清除这个用户的 节制 标记" + #. (para) msgid "Clearly, these two ways of marking up bibliographical entries are suited to different circumstances. You should use one or the other for your bibliography, not both. Strictly speaking, mingling the raw and the cooked may be “kosher” as far as the DTD is concerned, but it will almost certainly cause problems for most processing applications. " msgstr "显然，这二种标记参考书目条目的方法适用于不同的环境。你可以将任一个用于你的参考书目，但不能一起使用。严格的说，混合原始数据和已加工的数据按照 DTD 来说也许是“合适的” ，但它几乎可以肯定会导致绝大多数处理程序出问题。" @@ -18328,10 +20410,22 @@ msgstr "" msgid "Clears the stored sizes and positions of %ld dialogs" msgstr "清除存储的%ld个对话框的大小和位置数据" +msgid "Click here for the list of " +msgstr "点击这里获取列表" + #. Resource IDs: (1466) msgid "Click here to go to the website" msgstr "点击这里进入网站" +msgid "Click here to hide the legend for this table." +msgstr "点击这里隐藏图表的图例." + +msgid "Click here to include the legend for this table." +msgstr "点击这里包含图表的图例." + +msgid "Click here to reload this page." +msgstr "点击此处以重新加载页面." + #. Resource IDs: (170) msgid "Click here to select a recently typed message" msgstr "点击这里选择一条最近输入过的信息" @@ -18344,6 +20438,16 @@ msgstr "点击“高级设置”可根据不同扩展名指定不同的差异比 msgid "Click on \"Advanced\" to specify alternate merge programs based on file extension" msgstr "点击“高级设置”可根据不同扩展名指定不同合并程序" +msgid "" +"Click on a link to visit your options page for the\n" +" requested mailing list." +msgstr "点击连接以访问您请求的邮件列表的选项页面" + +msgid "" +"Click on the message number to view the individual\n" +" message, or you can " +msgstr "点击信息序号来查看分别的信息，或者您可以" + msgid "Client certificate filename: " msgstr "客户证书文件名: " @@ -18357,6 +20461,98 @@ msgstr "客户端/服务器版本不匹配" msgid "Clipboard" msgstr "剪贴板" +msgid "" +"Clone a member address.\n" +"\n" +"Cloning a member address means that a new member will be added who has all the\n" +"same options and passwords as the original member address. Note that this\n" +"operation is fairly trusting of the user who runs it -- it does no\n" +"verification to the new address, it does not send out a welcome message, etc.\n" +"\n" +"The existing member's subscription is usually not modified in any way. If you\n" +"want to remove the old address, use the -r flag. If you also want to change\n" +"any list admin addresses, use the -a flag.\n" +"\n" +"Usage:\n" +" clone_member [options] fromoldaddr tonewaddr\n" +"\n" +"Where:\n" +"\n" +" --listname=listname\n" +" -l listname\n" +" Check and modify only the named mailing lists. If -l is not given,\n" +" then all mailing lists are scanned from the address. Multiple -l\n" +" options can be supplied.\n" +"\n" +" --remove\n" +" -r\n" +" Remove the old address from the mailing list after it's been cloned.\n" +"\n" +" --admin\n" +" -a\n" +" Scan the list admin addresses for the old address, and clone or change\n" +" them too.\n" +"\n" +" --quiet\n" +" -q\n" +" Do the modifications quietly.\n" +"\n" +" --nomodify\n" +" -n\n" +" Print what would be done, but don't actually do it. Inhibits the\n" +" --quiet flag.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +" fromoldaddr (`from old address') is the old address of the user. tonewaddr\n" +" (`to new address') is the new address of the user.\n" +"\n" +msgstr "" +"复制一个成员。\n" +"\n" +"复制成员意味着把一个新成员加入到列表，这个新成员有着和源成员完全相同的选\n" +"项和口令。注意，此操作完全信任它的执行者 -- 它不对新成员作任何的确认，也不发\n" +"送任何欢迎信息，等等。\n" +"\n" +"现有成员的订阅一般来说不会以任何方式发生修改。如果您想要移除老成员的话，可以\n" +"使用-r选项。如果您也想修改任何列表管理员的地址，可以使用-a选项。\n" +"\n" +"用法：\n" +" clone_member [options] fromoldaddr tonewaddr\n" +"\n" +"其中：\n" +"\n" +" --listname=listname\n" +" -l listname\n" +" 仅检查和修改指定的邮件列表。如果没有指定-l选项，所有的邮件列表都将被\n" +" 扫描。可以指定多个-l选项。\n" +"\n" +" --remove\n" +" -r\n" +" 复制并删除成员。\n" +"\n" +" --admin\n" +" -a\n" +" 在列表管理员中查找、复制或修改老成员。\n" +"\n" +" --quiet\n" +" -q\n" +" 修改时不产生任何输出。\n" +"\n" +" --nomodify\n" +" -n\n" +" 打印将要做的修改，但不做任何实际的操作。不能同时使用--quiet选项。\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息并退出。\n" +"\n" +" fromoldaddr ('from old address') 是成员的旧地址。tonewaddr \n" +" ('to new address') 是成员的新地址。\n" +"\n" + #. Resource IDs: (222) msgid "Close manually" msgstr "手动关闭" @@ -18629,6 +20825,12 @@ msgstr "压缩 svndiff 数据失败" msgid "ComputerOutput" msgstr "ComputerOutput" +msgid "Computing threaded index\n" +msgstr "计算索引\n" + +msgid "Conceal the member's address" +msgstr "隐藏成员地址" + #. (title) msgid "Conditionals" msgstr "条件" @@ -18641,10 +20843,96 @@ msgstr "配置错误: 无效布尔值“%s”" msgid "Config error: invalid integer value '%s'" msgstr "配置错误: 无效整数值“%s”" +msgid "Configuration Categories" +msgstr "配置目录" + #. Resource IDs: (236) msgid "Configure Hook Scripts" msgstr "设置 Hook 脚本" +msgid "" +"Configure a list from a text file description.\n" +"\n" +"Usage: config_list [options] listname\n" +"\n" +"Options:\n" +" --inputfile filename\n" +" -i filename\n" +" Configure the list by assigning each module-global variable in the\n" +" file to an attribute on the list object, then saving the list. The\n" +" named file is loaded with execfile() and must be legal Python code.\n" +" Any variable that isn't already an attribute of the list object is\n" +" ignored (a warning message is printed). See also the -c option.\n" +"\n" +" A special variable named `mlist' is put into the globals during the\n" +" execfile, which is bound to the actual MailList object. This lets you\n" +" do all manner of bizarre thing to the list object, but BEWARE! Using\n" +" this can severely (and possibly irreparably) damage your mailing list!\n" +"\n" +" --outputfile filename\n" +" -o filename\n" +" Instead of configuring the list, print out a list's configuration\n" +" variables in a format suitable for input using this script. In this\n" +" way, you can easily capture the configuration settings for a\n" +" particular list and imprint those settings on another list. filename\n" +" is the file to output the settings to. If filename is `-', standard\n" +" out is used.\n" +"\n" +" --checkonly\n" +" -c\n" +" With this option, the modified list is not actually changed. Only\n" +" useful with -i.\n" +"\n" +" --verbose\n" +" -v\n" +" Print the name of each attribute as it is being changed. Only useful\n" +" with -i.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +"The options -o and -i are mutually exclusive.\n" +"\n" +msgstr "" +"从描述文本中配置邮件列表。\n" +"\n" +"用法： config_list [options] listname\n" +"\n" +"选项：\n" +" --inputfile filename\n" +" -i filename\n" +" 把文件中的每个模块全局变量(module-global variable)赋值给列表对象的\n" +" 相应属性，然后保存列表。指定的文件由execfile()加载，并且必须是合法\n" +" 的Python代码。不对应于列表对象任何属性的变量将被忽略(会打印一个警告\n" +" 信息)。参见-c选项。\n" +"\n" +" 一个名为'mlist'的特殊变量在execfile时被设置为全局变量，被绑定到真实\n" +" 的邮件列表对象上。这样您就可以对列表对象做任意的操作，但是小心！这样\n" +" 做可能会对您的邮件列表造成严重的(同时也可能是不可挽回的)伤害！\n" +"\n" +" --outputfile filename\n" +" -o filename\n" +" 以此脚本的输入格式输出列表的当前配置参数，而不是配置列表。这样您就可\n" +" 以方便地获取特定列表的配置并让其他列表使用相同配置。配置参数将被输出\n" +"\t 到以filename命名的文件中。如果文件名为'-'，数据将被写到标准输出。\n" +"\n" +" --checkonly\n" +" -c\n" +" 指定此选项后，要修改的列表不会作任何实际的改动。只有与-i选项一起指定\n" +" 时才起作用。\n" +"\n" +" --verbose\n" +" -v\n" +" 打印每一个被改变的属性的名字。只有与-i选项一起指定时才起作用。\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息并退出\n" +"\n" +"选项-o和-i不能同时使用。\n" +"\n" + #. Resource IDs: (65535) msgid "Configure the program used for comparing different revisions of files" msgstr "设置用来比较不同版本文件的程序。" @@ -18661,6 +20949,70 @@ msgstr "设置用来解决冲突的程序。" msgid "Configure viewer program for GNU diff files (patch files)." msgstr "设置查看 GNU 差异文件（补丁文件）的程序。" +msgid "Confirm" +msgstr "确认" + +msgid "" +"Confirm (*) - email confirmation required
    \n" +" Require approval - require list administrator\n" +" approval for subscriptions
    \n" +" Confirm and approve - both confirm and approve\n" +" \n" +"

    (*) when someone requests a subscription,\n" +" Mailman sends them a notice with a unique\n" +" subscription request number that they must reply to\n" +" in order to subscribe.
    This prevents\n" +" mischievous (or malicious) people from creating\n" +" subscriptions for others without their consent." +msgstr "" +"确认 (*) - 需要邮件确认
    \n" +" Require approvel - 需要列表管理员审核订阅请求
    \n" +" Confirm and approve - 即需要邮件确认也需要管理员审核\n" +" \n" +"

    (*) 当有人请求订阅时，Mailman会给他们发送一封通知，\n" +" 附带一个唯一的订阅请求号。要想订阅，必须回复此通知。\n" +"
    这用来防止恶意用户不经他人同意而为其订阅列表。" + +msgid "Confirm administrator password:" +msgstr "确认管理员密码:" + +msgid "Confirm and approve" +msgstr "确认并核准" + +msgid "Confirm change of address request" +msgstr "确认修改地址的请求" + +msgid "Confirm initial password:" +msgstr "确认初始密码:" + +msgid "Confirm moderator password:" +msgstr "确认主持者密码:" + +msgid "Confirm subscription request" +msgstr "确认订阅请求" + +msgid "Confirm unsubscription request" +msgstr "确认取消订阅请求" + +msgid "" +"Confirmation from your email address is required, to prevent anyone from\n" +"subscribing you without permission. Instructions are being sent to you at\n" +"%(email)s. Please note your subscription will not start until you confirm\n" +"your subscription." +msgstr "" +"为了防止其他人在未经您允许的情况下替您订阅列表，需要从您的邮件地址发送的确\n" +"认函。将会有一些指导信息被投递到您的信箱 %(email)s 中。请注意，除非您确认了\n" +"您的订阅请求，否则您的订阅将不会生效。" + +msgid "Confirmation string was empty." +msgstr "验证字符串为空." + +msgid "Confirmation string:" +msgstr "验证字符串:" + +msgid "Confirmation succeeded" +msgstr "确认成功" + #, c-format msgid "Conflict Current Base File: %s\n" msgstr "与当前的参考文件冲突: %s\n" @@ -18760,6 +21112,9 @@ msgstr "内容区域" msgid "Content area dimensions expressed as a percentage are a percentage of the intrinsic size of the image." msgstr "内容区域维度表示成的百分比是一个图像真实尺寸的百分比。" +msgid "Content filtered message notification" +msgstr "对内容被过滤信件的通知" + #. (title) msgid "Content models and validity" msgstr "内容模型与有效性" @@ -18768,6 +21123,9 @@ msgstr "内容模型与有效性" msgid "Content that may or must be replaced by the user" msgstr "内容可能或必须由用户所替换" +msgid "Content filtering" +msgstr "内容过滤" + #. (title) msgid "Context is important" msgstr "上下文很重要" @@ -18776,10 +21134,26 @@ msgstr "上下文很重要" msgid "Continue" msgstr "继续" +msgid "Continue awaiting approval" +msgstr "继续等待批准" + #. (title) msgid "Conventions Used in This Book" msgstr "本书的约定" +msgid "" +"Convert a list's interpolation strings from %-strings to $-strings.\n" +"\n" +"This script is intended to be run as a bin/withlist script, i.e.\n" +"\n" +"% bin/withlist -l -r convert \n" +msgstr "" +"把列表中内插的字符串从 %-strings 转化为 $-strings。\n" +"\n" +"此脚本应该被作为bin/withlist脚本来运行，也就是\n" +"\n" +"% bin/withlist -l -r convert \n" + #. (glossseealso) msgid "Cooked" msgstr "Cooked" @@ -19187,6 +21561,12 @@ msgstr "不能获得SASL机制列表" msgid "Could not open %1 because there are too many open files." msgstr "由于已经打开过多的文件，无法打开 %1。" +msgid "Could not open file for reading: %(filename)s." +msgstr "不能读取文件: %(filename)s。" + +msgid "Could not open file for writing:" +msgstr "无法以写方式打开文件：" + #. Resource IDs: (69) #, c-format msgid "" @@ -19325,10 +21705,16 @@ msgstr "创建补丁(&P)..." msgid "Create Changelist" msgstr "创建修改列表" +msgid "Create List" +msgstr "创建列表" + #. Resource IDs: (208) msgid "Create Patch" msgstr "创建补丁" +msgid "Create a %(hostname)s Mailing List" +msgstr "创建一个 %(hostname)s 邮件列表" + msgid "" "Create a new directory under version control.\n" "usage: 1. mkdir PATH...\n" @@ -19388,6 +21774,139 @@ msgstr "" " 在这两个情况下，所有的中间目录都必须事先存在。\n" msgid "" +"Create a new, unpopulated mailing list.\n" +"\n" +"Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n" +"\n" +"Options:\n" +"\n" +" -l language\n" +" --language=language\n" +" Make the list's preferred language `language', which must be a two\n" +" letter language code.\n" +"\n" +" -u urlhost\n" +" --urlhost=urlhost\n" +" Gives the list's web interface host name.\n" +"\n" +" -e emailhost\n" +" --emailhost=emailhost\n" +" Gives the list's email domain name.\n" +"\n" +" -q/--quiet\n" +" Normally the administrator is notified by email (after a prompt) that\n" +" their list has been created. This option suppresses the prompt and\n" +" notification.\n" +"\n" +" -h/--help\n" +" Print this help text and exit.\n" +"\n" +"You can specify as many of the arguments as you want on the command line:\n" +"you will be prompted for the missing ones.\n" +"\n" +"Every Mailman list has two parameters which define the default host name for\n" +"outgoing email, and the default URL for all web interfaces. When you\n" +"configured Mailman, certain defaults were calculated, but if you are running\n" +"multiple virtual Mailman sites, then the defaults may not be appropriate for\n" +"the list you are creating.\n" +"\n" +"You also specify the domain to create your new list in by typing the command\n" +"like so:\n" +"\n" +" newlist --urlhost=www.mydom.ain mylist\n" +"\n" +"where `www.mydom.ain' should be the base hostname for the URL to this virtual\n" +"hosts's lists. E.g. with this setting people will view the general list\n" +"overviews at http://www.mydom.ain/mailman/listinfo. Also, www.mydom.ain\n" +"should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n" +"the email hostname to be automatically determined.\n" +"\n" +"If you want the email hostname to be different from the one looked up by the\n" +"VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can specify\n" +"`emailhost' like so:\n" +"\n" +" newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n" +"\n" +"where `mydom.ain' is the mail domain name. If you don't specify emailhost but\n" +"urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST will\n" +"be used for the email interface.\n" +"\n" +"For backward compatibility, you can also specify the domain to create your\n" +"new list in by spelling the listname like so:\n" +"\n" +" mylist@www.mydom.ain\n" +"\n" +"where www.mydom.ain is used for `urlhost' but it will also be used for\n" +"`emailhost' if it is not found in the virtual host table. Note that\n" +"'--urlhost' and '--emailhost' have precedence to this notation.\n" +"\n" +"If you spell the list name as just `mylist', then the email hostname will be\n" +"taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL (as\n" +"defined in your Defaults.py file or overridden by settings in mm_cfg.py).\n" +"\n" +"Note that listnames are forced to lowercase.\n" +msgstr "" +"创建一个全新的、空的邮件列表\n" +"\n" +"用法: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n" +"\n" +"选项:\n" +"\n" +" -l language\n" +" --language=language\n" +" 设置列表的默认语言, 必须是两个字符但语言代码。\n" +"\n" +" -u urlhost\n" +" --urlhost=urlhost\n" +" 提供列表的web接口主机名。\n" +"\n" +" -e emailhost\n" +" --emailhost=emailhost\n" +" 提供列表的email域名。\n" +"\n" +" -q/--quiet\n" +" 通常管理员会收到一份邮件，通知他们的列表已建好。\n" +" 此操作能阻止提醒和email通知。\n" +"\n" +" -h/--help\n" +" 打印此帮助信息然后退出。\n" +"\n" +"只要您愿意，您能在命令行上指定任意多个参数：如果有缺少的参数，将会提醒您。\n" +"\n" +"每个Mailman列表都有两个参数，一个用来作为寄出Email的默认主机名，另一个则作\n" +"为所有的Web接口的默认URL。当配置完Mailman后，默认值业已被设置，但是如果您\n" +"正在运行多个虚拟Mailman站点，则默认值可能对您正在创建的列表并不适用。\n" +"\n" +"您还要为您创建的列表指定一个域，使用如下格式的命令：\n" +"\n" +" newlist --urlhost=www.mydom.ain mylist\n" +"\n" +"‘www.mydom.ain’ 将作为虚拟主机列表的网址的基础主机名。例如：通过此设置后，\n" +"人们将可以在http://www.mydom.ain/mailman/listinfo上察看列表的概要信息。而\n" +"且，如果email主机名是自动检测出的话，www.mydom.ain应该是mm_cfg.py/Defaults.py\n" +"中VIRTUAL_HOSTS这个mapping的关键字(key)。\n" +"\n" +"如果您希望email主机名与VIRTUAL_HOSTS中检索出的值不同，或者如果urlhost没有在\n" +"VIRTUAL_HOSTS中注册，您可以指定emailhost，格式如下：\n" +"\n" +" newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n" +"\n" +"其中，`mydom.ain'是邮件域名。如果您不指定emailhost而urlhost不在虚拟主机列表中，\n" +"则email接口将使用mm_cfg.DEFAULT_EMAIL_HOST\n" +"\n" +"为了向后兼容，您也可以在创建新列表时指定一个域名，通过使用如下的格式：\n" +"\n" +" mylist@www.mydom.ain\n" +"\n" +"这里www.mydom.ain被用来做为`urlhost'，但是如果在虚拟主机表中没有找到`emailhost'，\n" +"它也用来做为`emailhost'。注意，`--urlhost'和`--emailhost'的优先权比这种记法高。\n" +"\n" +"如果您把您的列表名仅拼写为\"mylist\"，则email主机名将从DEFAULT_EMAIL_HOST中取得，\n" +"URL将从DEFAULT_URL中取得。 (在文件Defaults.py中定义，或者被mm_cfg.py文件中的设置覆盖)\n" +"\n" +"注意列表名强制为小写字母。\n" + +msgid "" "Create an unversioned copy of a tree.\n" "usage: 1. export [-r REV] URL[@PEGREV] [PATH]\n" " 2. export [-r REV] PATH1[@PEGREV] [PATH2]\n" @@ -19424,6 +21943,9 @@ msgstr "" " 如果指定了 PEGREV ，将从指定的版本本开始查找。\n" "\n" +msgid "Create another list" +msgstr "创建另一个列表" + #. Resource IDs: (1385) msgid "Create copy in the repository from:" msgstr "从此复制到版本库" @@ -19472,6 +21994,9 @@ msgstr "正在创建 DAV 沙箱目录" msgid "Creating DocBook Documents" msgstr "创建 DocBook 文档" +msgid "Creating archive directory " +msgstr "创建归档目录" + msgid "Creating authz file" msgstr "正在创建 authz 文件" @@ -19518,6 +22043,9 @@ msgstr "无法取得凭证数据" msgid "Credits:" msgstr "贡献者：" +msgid "Croatian" +msgstr "克罗地亚语" + #. (title) msgid "Cross references" msgstr "交叉引用" @@ -19611,6 +22139,9 @@ msgstr "DTDDECL \"-//OASIS//DTD DocBook V3.1//EN\" \"docbook/3.1/docbook.dcl\"\n msgid "DTDDECL Warnings" msgstr "DTDDECL 警告" +msgid "Daily" +msgstr "每日" + #. (para) msgid "Dale Dougherty, O'Reilly & Associates" msgstr "Dale Dougherty，O'Reilly & Associates" @@ -19634,6 +22165,9 @@ msgstr "由计算机显示的或呈现的数据、一般文本" msgid "Database" msgstr "Database" +msgid "Database Updated..." +msgstr "数据库升级中..." + #. Resource IDs: (19, 76, 208) msgid "Date" msgstr "日期" @@ -19654,6 +22188,12 @@ msgstr "DeWolf" msgid "Dealing with Multiple Declarations" msgstr "处理多个声明" +msgid "Dec" +msgstr "十二月" + +msgid "December" +msgstr "十二月" + #. (title) msgid "Deciding How to Change a Customization Layer" msgstr "决定如何改变定制层" @@ -19683,6 +22223,16 @@ msgstr "默认条目没有版本号" msgid "Default entry is missing URL" msgstr "默认条目没有URL" +msgid "Default language for this list." +msgstr "列表默认语言。" + +msgid "" +"Default options for new members joining this list." +msgstr "" +"新加入列表成员的默认选项设定是：" + #. Resource IDs: (65535) msgid "Default path:" msgstr "默认路径：" @@ -19746,6 +22296,9 @@ msgstr "" " 忽略行尾样式的改变。 -p (--show-c-function):\n" " 在比较输出中显示 C 函数名称。" +msgid "Defer" +msgstr "延期" + #. (title) msgid "Define expressions" msgstr "定义表达式" @@ -19766,6 +22319,12 @@ msgstr "删除题为\"签名\"的章节。这样的章节不可以被包含在 msgid "Delete failed: directory has no entry '%s'" msgstr "删除失败: 目录没有条目“%s”" +msgid "Delete this list" +msgstr "删除此列表" + +msgid "Delete this mailing list" +msgstr "删除邮件列表" + #. Resource IDs: (17) msgid "Delete unversioned items..." msgstr "删除非版本控制的项目..." @@ -19805,6 +22364,9 @@ msgstr "正在删除" msgid "Deleting %s\n" msgstr "删除 %s\n" +msgid "Delivered by Mailman
    version %(version)s" +msgstr "由 Mailman
    %(version)s 投递" + msgid "Delta depth 'exclude' not supported" msgstr "不支持差异深度 “exclude”" @@ -19867,6 +22429,12 @@ msgstr "描述了元素的内容模型，它可以包含混合的事物，请参 msgid "Description" msgstr "描述" +msgid "Description:" +msgstr "描述" + +msgid "Description: %(description)s" +msgstr "描述： %(description)s" + #. Resource IDs: (213) msgid "Deselect changelist" msgstr "取消选定修改列表" @@ -19910,6 +22478,9 @@ msgstr "目标版本库没有初始化" msgid "Destination repository is already synchronizing from '%s'" msgstr "目标版本库已经与“%s”同步" +msgid "Detailed instructions for the administrative database" +msgstr "详细的管理数据库的指南" + #. Resource IDs: (1279) msgid "Details" msgstr "详细信息" @@ -20043,6 +22614,21 @@ msgstr "比较差异" msgid "Diffs the working copy file with the one before the last commit." msgstr "将工作副本中的文件与最后提交之前比较。" +msgid "Digest" +msgstr "摘要" + +msgid "Digest Footer" +msgstr "摘要尾部" + +msgid "Digest Header" +msgstr "摘要头部" + +msgid "Digest members:" +msgstr "订阅了摘要的成员:" + +msgid "Digest options" +msgstr "摘要选项" + #, c-format msgid "Directory '%s' containing working copy admin area is missing" msgstr "包含工作副本管理数据的目录“%s”丢失了" @@ -20086,14 +22672,85 @@ msgid "" "too much disk access when browsing the working copy." msgstr "如果你的工作副本非常大，占用了较大的硬盘空间，请禁用此选项。" +msgid "Disabled" +msgstr "禁用" + msgid "Disabled repository feature" msgstr "关闭版本库特性" +msgid "Discard" +msgstr "丢弃" + +msgid "Discard all messages marked Defer" +msgstr "丢弃所有标记有 推迟的信息" + +msgid "" +"Discard held messages older than this number of days.\n" +" Use 0 for no automatic discarding." +msgstr "丢弃此日数前被延缓的邮件。0 表示不自动丢弃" + +msgid "" +"Discard held messages.\n" +"\n" +"Usage:\n" +" discard [options] file ...\n" +"\n" +"Options:\n" +" --help / -h\n" +" Print this help message and exit.\n" +"\n" +" --quiet / -q\n" +" Don't print status messages.\n" +msgstr "" +"丢弃保存的信件。\n" +"\n" +"用法：\n" +" discard [options] file ...\n" +"\n" +"选项：\n" +" --help / -h\n" +" 打印此帮助信息然后退出。\n" +"\n" +" --quiet / -q\n" +" 不打印状态信息。\n" + +msgid "Discarded held msg #%(id)s for list %(listname)s" +msgstr "丢弃列表 %(listname)s 中保存的信件 #%(id)s" + +msgid "Discards" +msgstr "放弃" + #. Resource IDs: (3867) #, c-format msgid "Disk full while accessing %1." msgstr "存取 %1 时磁盘已满。" +msgid "" +"Dispatch digests for lists w/pending messages and digest_send_periodic set.\n" +"\n" +"Usage: %(PROGRAM)s [options]\n" +"\n" +"Options:\n" +" -h / --help\n" +" Print this message and exit.\n" +"\n" +" -l listname\n" +" --listname=listname\n" +" Send the digest for the given list only, otherwise the digests for all\n" +" lists are sent out.\n" +msgstr "" +"Dispatch digests for lists w/pending messages and digest_send_periodic set.\n" +"\n" +"用法： %(PROGRAM)s [options]\n" +"\n" +"选项：\n" +" -h / --help\n" +" 打印此帮助信息然后退出。\n" +"\n" +" -l listname\n" +" --listname=listname\n" +" 仅为指定的列表发送摘要，否则将给所有列表发送摘要。\n" + #. Resource IDs: (3860) #, c-format msgid "Dispatch exception: %1" @@ -20265,6 +22922,9 @@ msgstr "不要把一个已经存在的章节重新题为\"签名\"或和任何 msgid "Do not rotate the cell." msgstr "不旋转一个单元格。" +msgid "Do not send a copy of a member's own post" +msgstr "不发送成员自己邮件拷贝" + #. Resource IDs: (145) msgid "Do you really want to move this file or folder?" msgstr "你确认要移动这个文件或目录吗？" @@ -20553,6 +23213,15 @@ msgstr "双对齐文本。" msgid "Dover Archives" msgstr "Dover Archives" +msgid "" +"Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n" +"This is probably not safe.\n" +"Exiting." +msgstr "" +"发现降级安装, 从版本 %(hexlversion)s 到版本 %(hextversion)s\n" +"这很可能不安全.\n" +"正在退出." + #. Resource IDs: (1079) msgid "Drive Types" msgstr "磁盘驱动器类型" @@ -20569,6 +23238,9 @@ msgstr "" "丢弃 %d 版本。\n" "\n" +msgid "Dry run mode" +msgstr "演示模式" + #. (link) msgid "Dublin Core Metadata Element Set, Version 1.1: Reference Description" msgstr "Dublin 核心元数据元素集，1.1 版：参考描述" @@ -20581,6 +23253,59 @@ msgstr "转存流在“%.20s”包含错误头部（没有“:”）" msgid "Dump stream contains a malformed header (with no value) at '%.20s'" msgstr "转存流在“%.20s”包含错误头部（没有值）" +msgid "" +"Dump the contents of any Mailman `database' file.\n" +"\n" +"Usage: %(PROGRAM)s [options] filename\n" +"\n" +"Options:\n" +"\n" +" --marshal/-m\n" +" Assume the file contains a Python marshal, overridding any automatic\n" +" guessing.\n" +"\n" +" --pickle/-p\n" +" Assume the file contains a Python pickle, overridding any automatic\n" +" guessing.\n" +"\n" +" --noprint/-n\n" +" Don't attempt to pretty print the object. This is useful if there's\n" +" some problem with the object and you just want to get an unpickled\n" +" representation. Useful with `python -i bin/dumpdb '. In that\n" +" case, the root of the tree will be left in a global called \"msg\".\n" +"\n" +" --help/-h\n" +" Print this help message and exit\n" +"\n" +"If the filename ends with `.db', then it is assumed that the file contains a\n" +"Python marshal. If the file ends with `.pck' then it is assumed to contain a\n" +"Python pickle. In either case, if you want to override the default assumption\n" +"-- or if the file ends in neither suffix -- use the -p or -m flags.\n" +msgstr "" +"导出所有Mailman 'database'文件的内容。\n" +"\n" +"用法: %(PROGRAM)s [options] filename\n" +"\n" +"选项：\n" +"\n" +" --marshal/-m\n" +" 如果文件包含Python marshal，则覆盖任何自动猜测。\n" +"\n" +" --pickle/-p\n" +" 如果文件包含Python pickle，覆盖任何自动猜测。\n" +"\n" +" --noprint/-n\n" +" 不试图美化打印对象。这在对象有一些问题，并且您只是想获得一个unpickled\n" +" 表示时十分有用。以'python -i bin/dumpdb '的形式使用非常有用。这\n" +" 样的话，the root of the tree will be left in a global called \"msg\"。\n" +"\n" +" --help/-h\n" +" 打印此帮助信息然后退出\n" +"\n" +"如果文件名以'.db'结束，将假定文件中包含Python marshal。如果文件名以'.pck'结束，\n" +"将假定文件中包含Python pickle。无论是哪种情况，如果您想要覆盖默认的假定 -- 或者\n" +"文件名不以这两种后缀结束 -- 使用 -p 或者 -m 选项。\n" + msgid "Dumpstream data appears to be malformed" msgstr "转存流中出现非法数据" @@ -20684,10 +23409,66 @@ msgstr "ENTITIES" msgid "EXT" msgstr "EXT" +msgid "" +"Each header filter rule has two parts, a list of regular\n" +" expressions, one per line, and an action to take. Mailman\n" +" matches the message's headers against every regular expression in\n" +" the rule and if any match, the message is rejected, held, or\n" +" discarded based on the action you specify. Use Defer to\n" +" temporarily disable a rule.\n" +"\n" +" You can have more than one filter rule for your list. In that\n" +" case, each rule is matched in turn, with processing stopped after\n" +" the first match.\n" +"\n" +" Note that headers are collected from all the attachments \n" +" (except for the mailman administrivia message) and\n" +" matched against the regular expressions. With this feature,\n" +" you can effectively sort out messages with dangerous file\n" +" types or file name extensions." +msgstr "" +"每一个过滤器规则都包括两部分，一个正则表达式的清单，每行一\n" +" 条，以及要执行的动作。Mailman把邮件头部和每一个正则表达式进行\n" +" 匹配，如果匹配成功的话，根据您指定的动作，这封邮件就将被退回，\n" +" 暂存，或者丢弃。使用延缓来暂时禁用一条规则。\n" +"\n" +" 您可以有多条过滤器规则，这些规则将依次进行匹配，首次匹配成功后\n" +" 将不再进行后继的匹配过程。\n" +"\n" +" 注意，邮件头部将从所有的附件中收集(mailman内部管理信件除外)并与\n" +" 正则表达式进行匹配。您可以利用此特性来按照危险文件的种类或者文\n" +" 件扩展名来对信件进行有效的排序。" + #. (para) msgid "Each level of list is introduced by a description of how elements are selected from it:" msgstr "列表的每级都有一个如何从中选择元素的描述：" +msgid "" +"Each list member has a moderation flag which says\n" +" whether messages from the list member can be posted directly to\n" +" the list, or must first be approved by the list moderator. When\n" +" the moderation flag is turned on, list member postings must be\n" +" approved first. You, the list administrator can decide whether a\n" +" specific individual's postings will be moderated or not.\n" +"\n" +"

    When a new member is subscribed, their initial moderation flag\n" +" takes its value from this option. Turn this option off to accept\n" +" member postings by default. Turn this option on to, by default,\n" +" moderate member postings first. You can always manually set an\n" +" individual member's moderation bit by using the\n" +" membership management\n" +" screens." +msgstr "" +"每一个列表成员都有一个节制标志来控制此成员的信件是\n" +" 直接发送到列表中还是必须先经列表主持者审查。当节制标志被打开时\n" +" 列表成员的信件就必须先通过审查。作为列表管理员，您可以决定某个人\n" +" 的信件是否必须通过审查。\n" +"\n" +"

    新加入成员的初始节制标志将从此选项中获得。关闭此选项将默认直接\n" +" 接受成员的信件。打开此选项将默认使得成员信件必须首先经过审查。您\n" +" 总是可以在成员管理页单独地设\n" +" 置某个成员的节制标志。" + #. (para) msgid "Each of the following conditions is an error: " msgstr "下列条件都是错误：" @@ -20696,6 +23477,42 @@ msgstr "下列条件都是错误：" msgid "Each of:" msgstr "每一个：" +msgid "" +"Each subscriber is assigned a bounce score, as a floating\n" +" point number. Whenever Mailman receives a bounce from a list\n" +" member, that member's score is incremented. Hard bounces (fatal\n" +" errors) increase the score by 1, while soft bounces (temporary\n" +" errors) increase the score by 0.5. Only one bounce per day\n" +" counts against a member's score, so even if 10 bounces are\n" +" received for a member on the same day, their score will increase\n" +" by just 1.\n" +"\n" +" This variable describes the upper limit for a member's bounce\n" +" score, above which they are automatically disabled, but not\n" +" removed from the mailing list." +msgstr "" +"每个订阅者都被赋予一个退信值, 这是一个浮点数. 每当Mailman从\n" +" 某列表用户那里收到一封退信, 该用户的分值就被增加. 严重退信 (致命\n" +" 错误) 使分数加1, 而轻微退信 (暂时错误) 使分数增加0.5. 每个用户每\n" +" 天只被计算一封退信, 故而即使在一天内收到10封来自同一用户的退信, \n" +" 他的分数也仅会增1\n" +"\n" +" 这个变量描述了用户退信值的上限, 退信值高于此值的用户自动被禁止, \n" +" 但并非永久从列表中除名." + +msgid "" +"Each topic keyword is actually a regular expression, which is\n" +" matched against certain parts of a mail message, specifically the\n" +" Keywords: and Subject: message headers.\n" +" Note that the first few lines of the body of the message can also\n" +" contain a Keywords: and Subject:\n" +" \"header\" on which matching is also performed." +msgstr "" +"每个主题关键字事实上都是一个正则表达式，他们将与邮件的指定部分，\n" +" 特别是Keywords:头和Subject:头，进行匹配。\n" +" 注意，邮件正文的前面几行也可以包含Keywords:\"头\"和\n" +" Subject:\"头\"，也将对他们进行匹配。" + #. (para) msgid "Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License \"or any later version\" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation." msgstr "本许可证的每个版本都有一个有区别的版本号。如果文档指定服从一个特定的本协议版本\"或任何之后的版本\"(or any later version)，你可以选择遵循指定版本或自由软件基金会的任何更新的已经发布的版本 (不是草案) 的条款和条件来遵循。如果文档没有指定本许可证的版本，那么你可以选择遵循任何自由软件基金会曾经发布的版本 (不是草案)。" @@ -20712,6 +23529,12 @@ msgstr "Edie Freedman 设计了本书的封面，使用了一张多弗美术馆 msgid "Edit" msgstr "编辑" +msgid "Edit HTML : Error" +msgstr "编辑HTML : 错误" + +msgid "Edit Options" +msgstr "编辑选项" + #. Resource IDs: (227, 564) msgid "Edit Properties" msgstr "修改属性" @@ -20786,6 +23609,9 @@ msgstr "" "编辑属性“%s”于\r\n" "%s" +msgid "Edit the public HTML pages and text files" +msgstr "编辑公开的HTML页和文本文件" + #. Resource IDs: (1331) msgid "Edit..." msgstr "编辑..." @@ -20849,6 +23675,21 @@ msgstr "来自 http://www.w3.org/1999/xhtml 命名空间的元素。" msgid "Email" msgstr "Email" +msgid "Email My Password To Me" +msgstr "把我的口令邮寄给我" + +msgid "Email address:" +msgstr "邮件地址：" + +msgid "Emergency hold on all list traffic is in effect" +msgstr "紧急暂缓所有列表信件" + +msgid "Emergency moderation of all list traffic is enabled" +msgstr "所有列表通讯的紧急缓存被设置" + +msgid "Emergency moderation of all list traffic." +msgstr "紧急延缓列表中所有邮件。" + #. (tag) msgid "Emphasis" msgstr "Emphasis" @@ -20864,6 +23705,9 @@ msgstr "空的" msgid "Empty error list" msgstr "错误列表为空" +msgid "Empty list passwords are not allowed" +msgstr "列表口令不得为空" + #. (member) msgid "Ems" msgstr "全方(Em)" @@ -20880,6 +23724,9 @@ msgstr "" "仅在你使用VS.NET 2003开发Web项目时设置此选项！\n" "你必须重新启动系统使本选项生效。" +msgid "Enabled" +msgstr "启用" + #. Resource IDs: (195) msgid "" "Enables the spellchecker only if the\n" @@ -20888,6 +23735,14 @@ msgstr "" "仅在设置了 tsvn:projectlanguage\n" "时才进行拼写检查。" +msgid "" +"Encode the\n" +" subject\n" +" prefix even when it consists of only ASCII characters?" +msgstr "" +"即使标题前缀仅由ASCII码组成，\n" +" 也对它编码。" + #. Resource IDs: (3867) #, c-format msgid "Encountered a hardware I/O error while accessing %1." @@ -20921,6 +23776,9 @@ msgstr "写入 %1 时意外出错。" msgid "End Revision" msgstr "结束版本" +msgid "End of " +msgstr "结束" + #, c-format msgid "End revision %ld is invalid (youngest revision is %ld)" msgstr "结束版本 %ld 无效 (最新版本是 %ld)" @@ -20929,6 +23787,9 @@ msgstr "结束版本 %ld 无效 (最新版本是 %ld)" msgid "English" msgstr "英语" +msgid "English (USA)" +msgstr "英语(美式)" + #. Resource IDs: (3825) msgid "Enlarge the window to full size" msgstr "将窗口放到最大" @@ -20999,6 +23860,9 @@ msgstr "请输入介于 0 到 255 之间的整数。" msgid "Enter an integer." msgstr "请输入整数。" +msgid "Enter confirmation cookie" +msgstr "输入验证cookie" + #. Resource IDs: (1065) msgid "Enter log &message:" msgstr "输入日志信息(&M)：" @@ -21007,11 +23871,26 @@ msgstr "输入日志信息(&M)：" msgid "Enter log message:" msgstr "输入日志信息：" +msgid "Enter new administrator password:" +msgstr "输入新的管理员密码:" + +msgid "Enter new moderator password:" +msgstr "输入新的列表主持者密码:" + #. Resource IDs: (3858) #, c-format msgid "Enter no more than %1 characters." msgstr "请勿输入超过 %1 个字符。" +msgid "Enter one address per line below..." +msgstr "在下面的每一行填写地址..." + +msgid "Enter the email of the person running the list: " +msgstr "输入运行列表的人的email：" + +msgid "Enter the name of the list: " +msgstr "输入列表的名字：" + #. (para) msgid "Enter your user name when the system presents the login: prompt." msgstr "Enter your user name when the system presents the login: prompt." @@ -21121,6 +24000,9 @@ msgstr "Erik" msgid "Error" msgstr "错误" +msgid "Error Unsubscribing:" +msgstr "错误取消订阅:" + msgid "Error aborting report" msgstr "取消报告出错" @@ -21226,6 +24108,9 @@ msgstr "清理 post-commit 出错 (细节如下): " msgid "Error initializing command line arguments" msgstr "初始化命令行参数出错" +msgid "Error inviting:" +msgstr "错误邀请:" + #, c-format msgid "Error modifying entry for '%s'" msgstr "修改“%s”的入口出错" @@ -21243,6 +24128,16 @@ msgstr "将日志内容规格化为内部格式出错" msgid "Error opening db lockfile" msgstr "打开数据库锁文件出错" +msgid "" +"Error opening list \"%(listname)s\", skipping.\n" +"%(e)s" +msgstr "" +"打开列表\"%(listname)s\"时发生错误，忽略。\n" +"%(e)s" + +msgid "Error opening list %(listname)s... skipping." +msgstr "打开列表 %(listname)s 时出错... 正在跳过。" + msgid "Error opening local file" msgstr "打开本地文件出错" @@ -21373,6 +24268,9 @@ msgstr "设置属性 “%s” 出错: " msgid "Error spooling the %s request response to disk" msgstr "请求 %s 的响应脱机保存到磁盘时出现错误" +msgid "Error subscribing:" +msgstr "错误订阅:" + msgid "Error unlocking locked dirs (details follow):" msgstr "解除锁定目录出错(细节如下): " @@ -21430,6 +24328,9 @@ msgstr "写入 “%s” 时出错: 意外的 EOF" msgid "Error, cannot have a line break before a block element" msgstr "Error, cannot have a line break before a block element" +msgid "Error: " +msgstr "错误:" + #. (tag) msgid "ErrorCode" msgstr "ErrorCode" @@ -21446,6 +24347,9 @@ msgstr "ErrorType" msgid "Estonian" msgstr "爱沙尼亚语" +msgid "Euskara" +msgstr "喀拉海语" + #. (firstname) msgid "Eve" msgstr "Eve" @@ -21560,6 +24464,12 @@ msgstr "过期: %s\n" msgid "Explanatory material relating to a message in a message set" msgstr "与在一个消息集中的一条消息相关的解释性材料" +msgid "Explicit Reply-To: header." +msgstr "显式的Reply-To:头部。" + +msgid "Explicit address" +msgstr "显式地址" + msgid "Explicit target argument required" msgstr "必须明确地提供目标参数" @@ -21908,6 +24818,12 @@ msgstr "False(不进行填充缩放，可能出现失真缩放比例)" msgid "Farnham" msgstr "法納姆" +msgid "Feb" +msgstr "二月" + +msgid "February" +msgstr "二月" + #. (title) msgid "Fermat's Last Theorem" msgstr "Fermat's Last Theorem" @@ -22162,6 +25078,9 @@ msgstr "文件系统中路径“%s”既不是文件也不是目录" msgid "Filesystem upgrade is not supported" msgstr "不支持文件系统升级" +msgid "Filter out duplicate messages to list members (if possible)" +msgstr "过滤发送给成员的重复消息(如果可能的话)" + msgid "" "Filter out nodes with given prefixes from dumpstream.\n" "usage: svndumpfilter exclude PATH_PREFIX...\n" @@ -22184,6 +25103,9 @@ msgstr "过滤掉以下路径（多个路径之间用“*”字符分隔）：" msgid "Filter paths" msgstr "过滤器路径" +msgid "Filter rules to match against the headers of a message." +msgstr "匹配邮件头部的过滤器规则" + #, c-format msgid "Final line in revision file longer than 64 characters" msgstr "版本文件的最后一行大于 64 个字符" @@ -22191,6 +25113,9 @@ msgstr "版本文件的最后一行大于 64 个字符" msgid "Final line in revision file missing space" msgstr "版本文件的最后一行缺少空白字符" +msgid "Finalizing" +msgstr "完成" + #. (para) msgid "Finally, DocBook provides two attributes, align and valign to specify the alignment of the content area within the viewport area." msgstr "最后，DocBook 提供二个属性，align 和 valign 来指定内容区域在 viewport area 中的对齐方式。" @@ -22211,6 +25136,84 @@ msgstr "最后，我们直接告诉你到其它地方获得所有最新信息。 msgid "Find" msgstr "查找" +msgid "" +"Find all lists that a member's address is on.\n" +"\n" +"Usage:\n" +" find_member [options] regex [regex [...]]\n" +"\n" +"Where:\n" +" --listname=listname\n" +" -l listname\n" +" Include only the named list in the search.\n" +"\n" +" --exclude=listname\n" +" -x listname\n" +" Exclude the named list from the search.\n" +"\n" +" --owners\n" +" -w\n" +" Search list owners as well as members.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +" regex\n" +" A Python regular expression to match against.\n" +"\n" +"The interaction between -l and -x is as follows. If any -l option is given\n" +"then only the named list will be included in the search. If any -x option is\n" +"given but no -l option is given, then all lists will be search except those\n" +"specifically excluded.\n" +"\n" +"Regular expression syntax is Perl5-like, using the Python re module. Complete\n" +"specifications are at:\n" +"\n" +"http://www.python.org/doc/current/lib/module-re.html\n" +"\n" +"Address matches are case-insensitive, but case-preserved addresses are\n" +"displayed.\n" +"\n" +msgstr "" +"查找包含指定成员地址的所有列表。\n" +"\n" +"用法：\n" +" find_member [options] regex [regex [...]]\n" +"\n" +"其中：\n" +" --listname=listname\n" +" -l listname\n" +" 仅搜索指定的列表。\n" +"\n" +" --exclude=listname\n" +" -x listname\n" +" 不搜索指定的列表。\n" +"\n" +" --owners\n" +" -w\n" +" 搜索列表属主和成员。\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息并退出。\n" +"\n" +" regex\n" +" 将要匹配的一个Python正则表达式。\n" +"\n" +"-l和-x的相互影响如下。如果给出了-l选项，则仅搜索指定的列表。如果\n" +"指定了-x选项，但没有指定-l选项，那么除了指定的列表外，所有的列表都将被搜索。\n" +"\n" +"正则表达式语法类似于Perl5，使用了Python的re模块。完整的定义参见:\n" +"\n" +"http://www.python.org/doc/current/lib/module-re.html\n" +"\n" +"地址匹配是大小写无关的，但是显示的地址将保留原有形式。\n" +"\n" + +msgid "Find member %(link)s:" +msgstr "查找 %(link)s 的成员" + #. Resource IDs: (3603) msgid "" "Find the specified text\n" @@ -22231,6 +25234,9 @@ msgstr "完成！" msgid "Finnish" msgstr "芬兰语" +msgid "First" +msgstr "第一" + #. (revremark) msgid "First beta release" msgstr "First beta release" @@ -22250,6 +25256,45 @@ msgstr "FirstTerm" msgid "Fit image &sizes" msgstr "优化图像显示尺寸(&S)" +msgid "" +"Fix the MM2.1b4 archives.\n" +"\n" +"Usage: %(PROGRAM)s [options] file ...\n" +"\n" +"Where options are:\n" +" -h / --help\n" +" Print this help message and exit.\n" +"\n" +"Only use this to `fix' some archive database files that may have gotten\n" +"written in Mailman 2.1b4 with some bogus data. Use like this from your\n" +"$PREFIX directory\n" +"\n" +"%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n" +"\n" +"(note the backquotes are required)\n" +"\n" +"You will need to run `bin/check_perms -f' after running this script.\n" +msgstr "" +"修复MM2.1b4归档。\n" +"\n" +"用法: %(PROGRAM)s [options] file ...\n" +"\n" +"可用的选项有:\n" +" -h / --help\n" +" 打印此帮助信息然后退出。\n" +"\n" +"仅用来'修复'在Mailman 2.1b4中生成的带有虚假数据(bogus data)的邮件存档文件。\n" +"在您的$PREFIX目录里像这样来使用它:\n" +"\n" +"%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n" +"\n" +"(注意，反引号是必须的)\n" +"\n" +"在运行此脚本后您需要运行'bin/check_perms -f'。\n" + +msgid "Fixing language templates: %(listname)s" +msgstr "修正语言模板: %(listname)s" + #. (title) msgid "Fixing the Catalog" msgstr "修订编目" @@ -22278,6 +25323,12 @@ msgstr "Font Filename Extensions" msgid "Font geeks like Norm think every book should have one." msgstr "像 Norm 这样的字体讨厌鬼相信每本书中都会有一个。" +msgid "Footer added to every digest" +msgstr "加在每个摘要上的尾部信息" + +msgid "Footer added to mail sent to regular list members" +msgstr "添加到发给常规列表成员邮件尾部的文本" + #. (para) msgid "Footer rows are always rendered at the end of the table, despite thier logical placement near the beginning." msgstr "页脚行总是呈现在表格的结尾，尽管它们的逻辑位置在开始附近。" @@ -22418,6 +25469,16 @@ msgstr "指向几个 SGML FAQ 的链接， msgid "For rendering of sidebars, must these appear in the flow of the text where they appear in your files, or may they float?" msgstr "对于 sidebar 的使用，必须出现在文件中的文本流中，或者它们是浮动的吗？" +msgid "" +"For some reason, %(mbox_dir)s exists as a file. This won't work with\n" +"b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding." +msgstr "" +"因为某些原因, %(mbox_dir)s 作为一个文件存在. 它不能和\n" +"b6一同工作, 所以我将它更名为%(mbox_dir)s.tmp 并继续." + +msgid "For some unknown reason" +msgstr "由于未知原因" + #. (para) msgid "For the most part, DocBook attempts to describe document structure rather than presentation. However, in some complex environments, it is possible to demonstrate that there is no reasonable set of processing expectations that can guarantee correct formatting." msgstr "在极大程度上，DocBook 试图描述文档的结构而不是呈现。无论如何，在某些复杂的环境中，示范能保证正确格式的不合理的处理期望集是可能的。" @@ -22605,6 +25666,18 @@ msgstr "格式化为没有指示。" msgid "Formatting information for a spanned column in a table" msgstr "用于在表格中的跨越的列的格式化信息" +msgid "Forward messages (individually) to:" +msgstr "发送信息(分别)给:" + +msgid "Forward of moderated message" +msgstr "被暂存信件的转发" + +msgid "Forward to List Owner" +msgstr "向前到列表所有者" + +msgid "Forwarding options" +msgstr "转发选项" + msgid "Found a working copy path" msgstr "找到一个工作副本路径" @@ -22615,6 +25688,9 @@ msgstr "在版本文件中找到非法文件头" msgid "Four" msgstr "Four" +msgid "Fourth" +msgstr "第四" + #. (para) msgid "Frame all four sides of the table. In some environments with limited control over table border formatting, such as HTML, this may imply additional borders." msgstr "为所有四边加上外框。在某些受限控制在表格边框格式的环境中，如 HTML ，这暗示着附加的边框。" @@ -22646,6 +25722,9 @@ msgstr "Frank" msgid "French" msgstr " 法语" +msgid "Fri" +msgstr "星期五" + #. (subtitle) msgid "From Text to Model to Markup" msgstr "从文本到模型，再到标记" @@ -22662,6 +25741,9 @@ msgstr "起始：（合并范围的起始URL和版本）" msgid "Frontmatter, like the table of contents, is almost always generated automatically from the text of a document by the processing application. If you need information about how to mark up a table of contents in DocBook, please consult the reference page for toc." msgstr "向前引用，像目录，几乎总是由处理程序自动从文档的文本中生成。如果你需要关于如何在 DocBook 中标记目录的信息的话，请参考针对 toc 的参考页。" +msgid "Full Personalization" +msgstr "完全个性化" + #. (para) msgid "Fully justified (left and right margins or edges)" msgstr "完全对齐(左边和右边的空白或边)" @@ -22686,6 +25768,13 @@ msgstr "Internet 资源定位功能建议。" msgid "Functional requirements for Uniform Resource Names." msgstr "统一资源名称的功能需求。" +msgid "" +"Fundamental list characteristics, including descriptive\n" +" info and basic behaviors." +msgstr "" +"基本的列表特征，包括描述信息\n" +" 和基本行为。" + #. (surname) msgid "Futato" msgstr "Futato" @@ -22776,9 +25865,211 @@ msgstr "常规设置" msgid "General Entities" msgstr "普通实体" +msgid "General Options" +msgstr "一般选项" + msgid "General filesystem error" msgstr "普通文件系统错误" +msgid "" +"General framework for interacting with a mailing list object.\n" +"\n" +"There are two ways to use this script: interactively or programmatically.\n" +"Using it interactively allows you to play with, examine and modify a MailList\n" +"object from Python's interactive interpreter. When running interactively, a\n" +"MailList object called `m' will be available in the global namespace. It also\n" +"loads the class MailList into the global namespace.\n" +"\n" +"Programmatically, you can write a function to operate on a MailList object,\n" +"and this script will take care of the housekeeping (see below for examples).\n" +"In that case, the general usage syntax is:\n" +"\n" +"%% bin/withlist [options] listname [args ...]\n" +"\n" +"Options:\n" +"\n" +" -l / --lock\n" +" Lock the list when opening. Normally the list is opened unlocked\n" +" (e.g. for read-only operations). You can always lock the file after\n" +" the fact by typing `m.Lock()'\n" +"\n" +" Note that if you use this option, you should explicitly call m.Save()\n" +" before exiting, since the interpreter's clean up procedure will not\n" +" automatically save changes to the MailList object (but it will unlock\n" +" the list).\n" +"\n" +" -i / --interactive\n" +" Leaves you at an interactive prompt after all other processing is\n" +" complete. This is the default unless the -r option is given.\n" +"\n" +" --run [module.]callable\n" +" -r [module.]callable\n" +" This can be used to run a script with the opened MailList object.\n" +" This works by attempting to import `module' (which must be in the\n" +" directory containing withlist, or already be accessible on your\n" +" sys.path), and then calling `callable' from the module. callable can\n" +" be a class or function; it is called with the MailList object as the\n" +" first argument. If additional args are given on the command line,\n" +" they are passed as subsequent positional args to the callable.\n" +"\n" +" Note that `module.' is optional; if it is omitted then a module with\n" +" the name `callable' will be imported.\n" +"\n" +" The global variable `r' will be set to the results of this call.\n" +"\n" +" --all / -a\n" +" This option only works with the -r option. Use this if you want to\n" +" execute the script on all mailing lists. When you use -a you should\n" +" not include a listname argument on the command line. The variable `r'\n" +" will be a list of all the results.\n" +"\n" +" --quiet / -q\n" +" Suppress all status messages.\n" +"\n" +" --help / -h\n" +" Print this message and exit\n" +"\n" +"\n" +"Here's an example of how to use the -r option. Say you have a file in the\n" +"Mailman installation directory called `listaddr.py', with the following\n" +"two functions:\n" +"\n" +"def listaddr(mlist):\n" +" print mlist.GetListEmail()\n" +"\n" +"def requestaddr(mlist):\n" +" print mlist.GetRequestEmail()\n" +"\n" +"Now, from the command line you can print the list's posting address by running\n" +"the following from the command line:\n" +"\n" +"%% bin/withlist -r listaddr mylist\n" +"Loading list: mylist (unlocked)\n" +"Importing listaddr ...\n" +"Running listaddr.listaddr() ...\n" +"mylist@myhost.com\n" +"\n" +"And you can print the list's request address by running:\n" +"\n" +"%% bin/withlist -r listaddr.requestaddr mylist\n" +"Loading list: mylist (unlocked)\n" +"Importing listaddr ...\n" +"Running listaddr.requestaddr() ...\n" +"mylist-request@myhost.com\n" +"\n" +"As another example, say you wanted to change the password for a particular\n" +"user on a particular list. You could put the following function in a file\n" +"called `changepw.py':\n" +"\n" +"from Mailman.Errors import NotAMemberError\n" +"\n" +"def changepw(mlist, addr, newpasswd):\n" +" try:\n" +" mlist.setMemberPassword(addr, newpasswd)\n" +" mlist.Save()\n" +" except NotAMemberError:\n" +" print 'No address matched:', addr\n" +"\n" +"and run this from the command line:\n" +" %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n" +msgstr "" +"与mailing list对象交互的通用框架。\n" +"\n" +"可以用两种方式使用此脚本：交互式或者程序式。\n" +"交互式的使用允许您在Python交互式解释器中调整、检查和修改一个MailList\n" +"对象。此时，在全局命名空间中会有一个名为'm'的MailList对象可用，同时\n" +"也会把类MailList加载入全局命名空间。\n" +"\n" +"程序式的使用，您可以写一个函数来操纵MailList对象，而此脚本会负责所有\n" +"的内务处理(请查看下面的例子)。如果是那样的话，一般的使用语法是：\n" +"\n" +"%% bin/withlist [options] listname [args ...]\n" +"\n" +"选项：\n" +"\n" +" -l / --lock\n" +" 打开列表列表时将其加锁。一般来说打开列表是不加锁的(例如为只读操作而打\n" +" 开)。您总是可以通过输入'm.Lock()‘来给文件加锁。\n" +"\n" +" 注意，如果是用了此选项，您需要在退出前显式地调用m.Save()，因为解释器\n" +" 的清理过程不会自动保存对MailList对象所作的修改(但是会给列表解锁)。\n" +"\n" +" -i / --interactive\n" +" 在所有其他处理过程结束后给您提供一个交互式的提示。这是默认行为，除非\n" +" 提供了 -r 选项。\n" +"\n" +" --run [module.]callable\n" +" -r [module.]callable\n" +" 用于在一个打开的MailList对象上运行一个脚本，这是通过试图导入\n" +" 'module'(它必须在保存列表的目录下，或者可以通过您的sys.path来访问),\n" +" 然后从模块中调用'callable'来实现的。callable可以是一个类或者一个函\n" +" 数；它被作为MailList对象的第一个参数来调用。如果在命令行上给出了其\n" +" 的参数，他们会被作为后续的位置参数而传递给callable。\n" +"\n" +" 注意，'module.'是可选的；如果被省略的话，一个名为'callable'的模块将\n" +" 被导入。\n" +"\n" +" 全局变量'r'将被设置为此调用的返回值。\n" +"\n" +" --all / -a\n" +" 此选项仅与 -r 选项一起工作。在您想要在所有的邮件列表上运行脚本时使用\n" +" 此选项。在使用 -a 时，不能在命令行上包含列表名参数。变量'r'将是包含所\n" +" 有返回值的列表。\n" +"\n" +" --quiet / -q\n" +" 去除所有的状态消息。\n" +"\n" +" --help / -h\n" +" 打印此帮助信息然后退出。\n" +"\n" +"\n" +"下面是一个如何使用 -r 选项的例子。假设您在Mailman的安装目录下有一个叫做\n" +"'listaddr.py'的文件，其中有下面的两个函数：\n" +"\n" +"def listaddr(mlist):\n" +" print mlist.GetListEmail()\n" +"\n" +"def requestaddr(mlist):\n" +" print mlist.GetRequestEmail()\n" +"\n" +"现在，您可以通过在命令行上运行下面的命令来打印出列表的post地址：\n" +"\n" +"%% bin/withlist -r listaddr mylist\n" +"Loading list: mylist (unlocked)\n" +"Importing listaddr ...\n" +"Running listaddr.listaddr() ...\n" +"mylist@myhost.com\n" +"\n" +"您可以通过运行：\n" +"\n" +"%% bin/withlist -r listaddr.requestaddr mylist\n" +"Loading list: mylist (unlocked)\n" +"Importing listaddr ...\n" +"Running listaddr.requestaddr() ...\n" +"mylist-request@myhost.com\n" +"\n" +"来打印出列表的request地址。\n" +"另外一个例子，假设您希望改变一指定列表中特定用户的口令，您可以把下面的函数\n" +"放到一个名为'changepw.py'的文件中：\n" +"\n" +"from Mailman.Errors import NotAMemberError\n" +"\n" +"def changepw(mlist, addr, newpasswd):\n" +" try:\n" +" mlist.setMemberPassword(addr, newpasswd)\n" +" mlist.Save()\n" +" except NotAMemberError:\n" +" print 'No address matched:', addr\n" +"\n" +"从命令行中运行：\n" +" %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n" + +msgid "General list information page" +msgstr "通用列表信息页面" + +msgid "General list personality" +msgstr "一般的列表属性" + #. (title) msgid "General purpose" msgstr "常规应用" @@ -22799,6 +26090,49 @@ msgstr "常规::对话框组一" msgid "General::Dialogs 2" msgstr "常规::对话框组二" +msgid "" +"Generate binary message catalog from textual translation description.\n" +"\n" +"This program converts a textual Uniforum-style message catalog (.po file) into\n" +"a binary GNU catalog (.mo file). This is essentially the same function as the\n" +"GNU msgfmt program, however, it is a simpler implementation.\n" +"\n" +"Usage: msgfmt.py [OPTIONS] filename.po\n" +"\n" +"Options:\n" +" -o file\n" +" --output-file=file\n" +" Specify the output file to write to. If omitted, output will go to a\n" +" file named filename.mo (based off the input file name).\n" +"\n" +" -h\n" +" --help\n" +" Print this message and exit.\n" +"\n" +" -V\n" +" --version\n" +" Display version information and exit.\n" +msgstr "" +"从文本翻译描述中产生二进制信息目录。\n" +"\n" +"本程序将原始的统一字符编码的信息目录(.po文件)转换成二进制的GNU目录(.mo文件)。\n" +"它本质上和GNU的msgfmt程序是一样的，但是，它只是一个简单的操作。\n" +"\n" +"用法: msgfmt.py [OPTIONS] filename.po\n" +"\n" +"选项:\n" +" -o file\n" +" --output-file=file\n" +" 指定信息写入的文件。如果忽略，将会输出到名为filename.mo（取决于输入文件名）的文件中。\n" +"\n" +" -h\n" +" --help\n" +" 输出此信息并退出。\n" +"\n" +" -V\n" +" --version\n" +" 显示版本信息并退出。\n" + #. (title) msgid "Generating HTML output." msgstr "产生 HTML 输出。" @@ -22921,6 +26255,9 @@ msgstr "GlossTerm" msgid "Glossary" msgstr "术语表" +msgid "Gnu's Not Unix" +msgstr "Gnu's Not Unix" + #. Resource IDs: (280) msgid "Go offline?" msgstr "是否离线？" @@ -22929,6 +26266,12 @@ msgstr "是否离线？" msgid "Go to line" msgstr "跳转到行号" +msgid "Go to list archives" +msgstr "前往列表归档" + +msgid "Go to the general list information page" +msgstr "前往列表常规信息页" + #. Resource IDs: (2051) msgid "" "Go to the next conflict\n" @@ -23014,6 +26357,9 @@ msgstr "分组修改列表" msgid "Groups, like arguments, may be optional, required, or plain and may or may not repeat. The same brackets and ellipses that are used to indicate these characteristics on arguments are used on groups." msgstr "分组、如参数，也许是可选的、必须的或无格式的，并且可能是重复或不重复出现的。用于指出这些参数特征的括号和省略号同样也用于分组。" +msgid "Gzip'd Text%(sz)s" +msgstr "Gzip压缩文本大小为 %(sz)s" + #. Resource IDs: (1229) msgid "H&ide unrelated changed paths" msgstr "隐藏无关的修改路径(&I)" @@ -23038,10 +26384,19 @@ msgstr "HTML 表单" msgid "HTML Forms Module" msgstr "HTML 表单模块" +msgid "HTML Unchanged." +msgstr "HTML 没有改变." + +msgid "HTML attachment scrubbed and removed" +msgstr "HTML附件被移除" + #. (title) msgid "HTML output" msgstr "HTML 输出" +msgid "HTML successfully updated." +msgstr "HTML更新成功." + #. (para) msgid "HTML tables may include column headers and footers. To identify a row header, use a th in the row." msgstr "HTML 表格可以包括列头和列脚。在行中使用 th 来标识一行表头。" @@ -23074,6 +26429,22 @@ msgstr "Head 2" msgid "Head revision is %s" msgstr "最新版本是 %s" +msgid "Header added to every digest" +msgstr "加在每个摘要上的头部" + +msgid "Header added to mail sent to regular list members" +msgstr "添加到发给常规列表成员邮件头部的文本" + +msgid "" +"Header filter rules require a pattern.\n" +" Incomplete filter rules will be ignored." +msgstr "" +"头部过滤器规则需要一个模式。\n" +" 不完整的过滤器规则将被忽略。" + +msgid "Header filters" +msgstr "头部过滤器" + #. (para) msgid "Header rows are always rendered at the beginning of the table." msgstr "表头行总是呈现在表格的开始处。" @@ -23114,6 +26485,13 @@ msgstr "隐藏已删除的路径(&D)" msgid "Hide the script while running" msgstr "运行时隐藏脚本" +msgid "" +"Hide the sender of a message, replacing it with the list\n" +" address (Removes From, Sender and Reply-To fields)" +msgstr "" +"隐藏消息的发送者，用列表地址替代它。\n" +" (将From,Sender,Reply-TO等域的信息删除掉)" + #. Resource IDs: (2052) msgid "" "Hide/Show the patch file list\n" @@ -23130,6 +26508,18 @@ msgstr "最高版本号在缓存中" msgid "Hint: Press F5 to refresh the selected subtree and Ctrl-F5 to load all children too" msgstr "提示：按下 F5 可以重新整理选择的子树，而 Ctrl-F5 可以重新加载全部子树" +msgid "Hit enter to notify %(listname)s owner..." +msgstr "单击回车来通知 %(listname)s的所有者..." + +msgid "Hold" +msgstr "滞留" + +msgid "Hold posts with header value matching a specified regexp." +msgstr "暂存头部匹配指定正则表达式的信件。" + +msgid "Holds" +msgstr "滞留" + #. (para) msgid "Holds additional information that may be used by the applicatoin when resolving the link" msgstr "保存附加信息可能被应用程序在解析链接时所使用" @@ -23150,6 +26540,18 @@ msgstr "Hook 类型：" msgid "Horizontal Span" msgstr "Horizontal Span" +msgid "Host name this list prefers for email." +msgstr "列表发送邮件时使用的主机名。" + +msgid "Hostile address (illegal characters)" +msgstr "不合法的地址(含有非法的字符)" + +msgid "Hostile address (illegal characters): %(member)s" +msgstr "恶意地址(非法字符)： %(member)s" + +msgid "Hostile subscription attempt detected" +msgstr "检测到敌意的订阅尝试" + #. Resource IDs: (82) #, c-format msgid "Hostname mismatch (%s)" @@ -23159,6 +26561,9 @@ msgstr "站点名称不符(%s)" msgid "How Does DocBook Fit In?" msgstr "DocBook 适用场合" +msgid "How big in Kb should a digest be before it gets sent out?" +msgstr "在被邮递除去之前，摘要的大小应该是多少Kb？" + #. (title) msgid "How can this markup help you?" msgstr "标记对你有什么帮助？" @@ -23171,6 +26576,26 @@ msgstr "你如何创建目录、标题列表和索引？他们保存到 DocBook msgid "How did you specify column widths in tables? Did you use vertical spans? Did you use horizontal spans?" msgstr "如何指定表格中列的宽度？你使用垂直跨越吗？你使用水平跨越吗？" +msgid "" +"How many Your Membership Is Disabled warnings a\n" +" disabled member should get before their address is removed from\n" +" the mailing list. Set to 0 to immediately remove an address from\n" +" the list once their bounce score exceeds the threshold. This\n" +" value must be an integer." +msgstr "" +"一个被禁止成员的地址被移出邮件列表前, 收到你的成员\n" +" 资格被禁止 警告的次数. 如果设置成0, 则一旦某成员的退信值超过\n" +" 阈值, 他的地址便立即被移出列表。" + +msgid "How many body lines should the topic matcher scan?" +msgstr "主题匹配器应该扫描多少行正文内容？" + +msgid "How often should a new archive volume be started?" +msgstr "每隔多久启动一个新的存档卷?" + +msgid "How often should a new digest volume be started?" +msgstr "多长时间开始新的一册摘要？" + #. (para) msgid "How to customize DocBook." msgstr "如何定制 DocBook。" @@ -23667,6 +27092,13 @@ msgstr "如果指定了内容区域，图像将被缩放(可能失真)为指定 msgid "If a document, for example an article, is written in connection with a conference, the elements in this wrapper are used to hold information about the conference: titles, sponsors, addresses, dates, etc." msgstr "如果一个文档，例如一篇论文(article)，它为某个会议编写，在这个包装器中的元素将用于保存关于会议的信息：标题、主办方、地址、日期等等。" +msgid "" +"If a posting has this number, or more, of recipients, it is\n" +" held for admin approval. Use 0 for no ceiling." +msgstr "" +"如果某封信件的收件人数目大于或等于这个数字，就将被暂存以待\n" +" 管理员核准。0表示无上限。" + #. (para) msgid "If a scaling factor is specified, the intrinsic size is scaled uniformly by that amount to obtain the content area which is rendered in a viewport area that is implementation defined:" msgstr "如果指定了缩放比例，真实尺寸一律由合计获得的呈现在实现定义的视口区域中的内容区域缩放：" @@ -23903,6 +27335,25 @@ msgstr "如果你出版或分发了超过 100 份文档的不透明拷贝，你 msgid "If you publish printed copies of the Document numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects." msgstr "如果你发行文档的印刷版的拷贝 多于 100 份，而文档的许可证声明中要求封皮文本，你必须将它清晰明显地置于封皮之上，封面文本在封面上，封底文本在封底上。封面和封底上还必须标明你是这些拷贝的发行者。封面必须以同等显著、可见地完整展现标题的所有文字。你可以在封面上加入其它的材料。改动仅限于封皮的复制，只要保持文档的标题不变并满足这些条件，可以在其它方面被视为是的逐字的复制。" +msgid "If you reject this post,
    please explain (optional):" +msgstr "如果您拒绝了这个邮件,
    请给出原因 (可选l):" + +msgid "" +"If you reply to this message, keeping the Subject: header intact, Mailman will\n" +"discard the held message. Do this if the message is spam. If you reply to\n" +"this message and include an Approved: header with the list password in it, the\n" +"message will be approved for posting to the list. The Approved: header can\n" +"also appear in the first line of the body of the reply." +msgstr "" +"如果您回复该信件，请保持Subject:邮件头不变,\n" +"Mailman 将会丢弃被暂存的信件。如果该信息是垃圾邮件，采用以上处理方式。\n" +"如果您回复该信件并包含带有邮件列表密码的Approved:头部\n" +"该信件将被批准发送至列表。该Approved:头部将会\n" +"同时出现在回复信件正文的第一行" + +msgid "If you supply a password, you must confirm it." +msgstr "如果您提供一个口令，您必须对它进行确认。" + #. (para) msgid "If you tie your shoelaces, you're less likely to trip and fall down." msgstr "If you tie your shoelaces, you're less likely to trip and fall down." @@ -23975,6 +27426,37 @@ msgstr "如果你的文档使用 XML 1.0，并且编码是 Never     to\n" +" disable prefix encoding. This can make the subject headers\n" +" slightly more readable for users with mail readers that don't\n" +" properly handle non-ASCII encodings.\n" +"\n" +"

    Note however, that if your mailing list receives both encoded\n" +" and unencoded subject headers, you might want to choose As\n" +" needed. Using this setting, Mailman will not encode ASCII\n" +" prefixes when the rest of the header contains only ASCII\n" +" characters, but if the original header contains non-ASCII\n" +" characters, it will encode the prefix. This avoids an ambiguity\n" +" in the standards which could cause some mail readers to display\n" +" extra, or missing spaces between the prefix and the original\n" +" header." +msgstr "" +"如果你的邮件列表默认语言使用非ASCII码集，并且前缀中有非ASCII码，\n" +" 将使用相关标准对前缀编码。但是，如果前缀仅包含ASCII码，或许你想\n" +" 设置该选项为从不以禁止对前缀编码。对使用不支持非ASCII译\n" +" 码邮件阅读器的用户来说，这将使得头部标题变得易读一些。\n" +"\n" +"

    注意，如果你的邮件列表同时接收编码和未编码的头部标题，你应该\n" +" 选择根据需要。使用这个设定，如果头部其余部分仅含ASCII\n" +" 码，Mailman将不编码前缀， 反之，如果原始头部中含有非ASCII码字符，\n" +" 则将编码前缀。对于可能导致邮件阅读器显示额外信息或是遗失前缀和\n" +" 头部之间空格的标准，这样做避免了译码时可能出现的模糊。" + #. (para) msgid "If your schema is a proper subset, you can advertise this status by using the subset keyword in the version. If your schema contains any markup model extensions, you can advertise this status by using the extension keyword. If you'd rather not characterize your variant specifically as a subset or an extension, you can leave out this field entirely or, if you prefer, use the variant keyword." msgstr "如果你的方案仅仅是一个子集，你可以在版本中使用 subset 关键字来标识这个状态。如果你的方案包含有任何标记模型扩展，你可以使用 extension 关键字来标识这个状态。如果你不愿明确的区分你的变化是子集还是扩展，你完全可以省略这个字段，或者如果你喜欢，可以使用 variant 关键字。" @@ -23983,6 +27465,9 @@ msgstr "如果你的方案仅仅是一个子集，你可以在版本中使用 Unsubscribe button and a\n" +" confirmation message will be sent to you.\n" +"\n" +"

    Important: From this point on, you must have\n" +" cookies enabled in your browser, otherwise none of your changes will take\n" +" effect.\n" +" " +msgstr "" +"为了修改您的选项，您必须首先在下面的部分中使用您的 %(extra)s 成员口令进行登录。\n" +" 如果您忘记了您的口令，您可以通过点击下面的按钮来把它邮寄给您。如果您只是想\n" +" 退订此列表，请点击退订按钮，然后一封确认函将投递给您。\n" +"\n" +"

    重要：从此处起，您必须在您的浏览器中启用cookies，\n" +" 否则您做的所有修改都将不起作用。\n" +" " + #. (para) msgid "In order to enforce a standard set of marks at your organization, it may be useful to construct a customization layer that limits the values of the mark attribute to an enumerated list. See ." msgstr "为了在你的组织内强制一个标记集标准，构造一个限制 mark 的值为一个枚举列表的定制层可能是很有用的。请参阅 。" @@ -24364,6 +27900,30 @@ msgstr "错误的文件名。" msgid "Incorrect parameters given" msgstr "参数不正确" +msgid "" +"Increment the digest volume number and reset the digest number to one.\n" +"\n" +"Usage: %(PROGRAM)s [options] [listname ...]\n" +"\n" +"Options:\n" +"\n" +" --help/-h\n" +" Print this message and exit.\n" +"\n" +"The lists named on the command line are bumped. If no list names are given,\n" +"all lists are bumped.\n" +msgstr "" +"增加摘要卷序号并把摘要序号复位至1。\n" +"\n" +"用法： %(PROGRAM)s [options] [listname ...]\n" +"\n" +"选项：\n" +"\n" +" --help/-h\n" +" 打印此帮助信息然后退出。\n" +"\n" +"命令行上给出的列表将被处理。如果没有给出任何列表的话，所有的列表都将被处理。\n" + #. (para) msgid "Indentifies the location of the data by URI" msgstr "用 URI 标识数据的位置" @@ -24539,10 +28099,31 @@ msgstr "FuncSynopsis 的 FuncDefs 的补充信息" msgid "Information supplementing the contents of a ClassSynopsis" msgstr "补充一个 ClassSynopsis 内容的信息" +msgid "Initial %(listname)s password: " +msgstr "初始的 %(listname)s的密码：" + #. Resource IDs: (76) msgid "Initial import" msgstr "初始化导入" +msgid "" +"Initial list of supported languages.

    Note that if you do not\n" +" select at least one initial language, the list will use the server\n" +" default language of %(deflang)s" +msgstr "" +"支持语言的初始列表.

    请注意:如果您\n" +" 没有选择初始语言, 邮件列表将采用服务器\n" +" 默认的语言 %(deflang)s" + +msgid "Initial list owner address:" +msgstr "初始的列表拥有者地址:" + +msgid "Initial list password:" +msgstr "初始列表密码:" + +msgid "Initial list passwords do not match" +msgstr "初始列表密码不匹配" + msgid "Initialization of SSPI library failed" msgstr "初始化 SSPI 库失败" @@ -24550,6 +28131,49 @@ msgstr "初始化 SSPI 库失败" msgid "Initially selected" msgstr "最初是选定的" +msgid "" +"Inject a message from a file into Mailman's incoming queue.\n" +"\n" +"Usage: inject [options] [filename]\n" +"\n" +"Options:\n" +"\n" +" -h / --help\n" +" Print this text and exit.\n" +"\n" +" -l listname\n" +" --listname=listname\n" +" The name of the list to inject this message to. Required.\n" +"\n" +" -q queuename\n" +" --queue=queuename\n" +" The name of the queue to inject the message to. The queuename must be\n" +" one of the directories inside the qfiles directory. If omitted, the\n" +" incoming queue is used.\n" +"\n" +"filename is the name of the plaintext message file to inject. If omitted,\n" +"standard input is used.\n" +msgstr "" +"把文件中的信件插入到Mailman的incoming队列中。\n" +"\n" +"用法: inject [options] [filename]\n" +"\n" +"选项：\n" +"\n" +" -h / --help\n" +" 打印此帮助信息并退出。\n" +"\n" +" -l listname\n" +" --listname=listname\n" +" 将插入信件的列表名。必须指定此选项。\n" +"\n" +" -q queuename\n" +" --queue=queuename\n" +" 将要插入信件的队列名。queuename必须是qfiles目录的一个子目录名。如果省略\n" +" 的话，将使用incoming队列。\n" +"\n" +"filename是要插入的文本信息文件。如果省略的话，将使用标准输入。\n" + #. (title) msgid "Inline Elements" msgstr "行内元素" @@ -24671,6 +28295,9 @@ msgstr "指定压缩级别的内部值" msgid "Internet RFCs" msgstr "互联网 RFC" +msgid "Interrupted..." +msgstr "被中断..." + #. (title) msgid "Introduction" msgstr "简介" @@ -24701,6 +28328,9 @@ msgstr "无效的format属性" msgid "Invalid 8-Bit Character" msgstr "非法八位字符" +msgid "Invalid : %(addr)30s" +msgstr "无效的: %(addr)30s" + #, c-format msgid "Invalid URL '%s'" msgstr "无效URL“%s”" @@ -24771,6 +28401,23 @@ msgstr "无效配置: 未知的 http 认证类型“%s”" msgid "Invalid configuration value" msgstr "无效的配置取值" +msgid "" +"Invalid confirmation string. It is\n" +" possible that you are attempting to confirm a request for an\n" +" address that has already been unsubscribed." +msgstr "" +"无效的验证字符串. \n" +" 可能你在尝试为已经取消订阅的地址确认请求." + +msgid "" +"Invalid confirmation string. Note that confirmation strings expire\n" +"approximately %(days)s days after the initial subscription request. If your\n" +"confirmation has expired, please try to re-submit your original request or\n" +"message." +msgstr "" +"无效的确认字符串。注意，确认字符串将会在最初的订阅请求发出后大约 %(days)s 天\n" +"后过期。如果此确认字符串已经过期了，请重新提交您之前的请求或信息。" + #, c-format msgid "Invalid control character '0x%02x' in path '%s'" msgstr "无效控制字符 “0x%02x” 在路径 “%s” 中" @@ -24876,6 +28523,12 @@ msgstr "" "非法选项；没有已合并的版本来编辑。\n" "\n" +msgid "Invalid options to CGI script" +msgstr "无效的CGI脚本参数" + +msgid "Invalid options to CGI script." +msgstr "无效的CGI脚本选项" + msgid "Invalid prop-mod flag in rev-file" msgstr "rev-file 中有无效的 prop-mod 标志" @@ -25016,14 +28669,34 @@ msgstr "节点合并信息计数的值非法(%%%s)" msgid "Invalid value for field '%s'" msgstr "“%s”域的值无效" +msgid "Invalid value for property: %(k)s" +msgstr "属性值非法: %(k)s" + +msgid "Invalid value for variable: %(property)s" +msgstr "该变量的值非法：%(property)s" + #, c-format msgid "Invalid version line in entries file of '%s'" msgstr "“%s”文件中的版本行无效" +msgid "Invite" +msgstr "邀请" + #. (para) msgid "Ironically, the processing expectations of a simplelist are quite complex. The value of the type attribute determines if the list is presented inline, or in a row- or column-major table. In the table cases, the columns attribute determines the number of columns in the table." msgstr "讽刺的是，simplelist 的处理期望是十分复杂的。type 属性的值决定了列表是否呈现在一行内，或者在一个行列表格中。在表格的情况下，columns 属性决定了在表格中的列数。" +msgid "Is archive file source for public or private archival?" +msgstr "存档文件是公开的还是私人的?" + +msgid "Is qrunner even running?" +msgstr "队列管理器正在运行吗？" + +msgid "" +"Is the list moderator's approval required for unsubscription\n" +" requests? (No is recommended)" +msgstr "退订请求需要经过列表主持者的核准吗？(推荐选否)" + #. Resource IDs: (570) msgid "Issue Tracker Hook" msgstr "问题追踪钩子" @@ -25158,6 +28831,12 @@ msgstr "迭代在完成前终止" msgid "James T." msgstr "James T." +msgid "Jan" +msgstr "一月" + +msgid "January" +msgstr "一月" + #. (entry) msgid "Japanese" msgstr "日语" @@ -25178,6 +28857,18 @@ msgstr "Jeffrey D." msgid "Jon Bosak, Novell" msgstr "Jon Bosak，Novell" +msgid "Jul" +msgstr "七月" + +msgid "July" +msgstr "七月" + +msgid "Jun" +msgstr "六月" + +msgid "June" +msgstr "六月" + #. (seg) msgid "Juneau" msgstr "Juneau" @@ -25246,6 +28937,12 @@ msgstr "语言" msgid "Language Code" msgstr "语言代码" +msgid "Language options" +msgstr "语言选项" + +msgid "Languages supported by this list." +msgstr "列表支持的语言。" + #, c-format msgid "Last Changed Author: %s\n" msgstr "最后修改的作者: %s\n" @@ -25257,6 +28954,9 @@ msgstr "最后修改的时间" msgid "Last Changed Rev: %ld\n" msgstr "最后修改的版本: %ld\n" +msgid "Last autoresponse notification for today" +msgstr "本日最后一条自动回复通知" + #. Resource IDs: (65535) msgid "Last commit revision:" msgstr "上次提交版本：" @@ -25293,6 +28993,12 @@ msgstr "最不活跃作者：" msgid "Leave conflicted:" msgstr "剩下冲突：" +msgid "" +"Leave the initial password (and confirmation) fields\n" +" blank if you want Mailman to autogenerate the list\n" +" passwords." +msgstr "如果您想让 Mailman 自动生成列表密码,请将初始密码域(和验证域)置空." + #. Resource IDs: (188) msgid "Left View: " msgstr "左侧查看：" @@ -25320,6 +29026,9 @@ msgstr "保留本地修改或未纳入版本控制的文件" msgid "Left-flush data/Left-justify text. This is the default value for table data." msgstr "左对齐的数据/左对齐的文本。这是表格数据的默认值。" +msgid "Legacy anti-spam filters" +msgstr "传统的垃圾邮件过滤器" + #. (para) msgid "Lengths must be expressed as a decimal value followed immediately by an optional unit of measure or a percentage. Six and one eight inches, for example, must be expressed as 6.125in. It is an error to put a space or other punctuation between the decimal value and the unit of measure." msgstr "长度必须表示为一个十进制的值，后面紧跟着一个可选的测量单位或百分比。6.125 英寸，例如，必须表示为 6.125in。在十进制值和测量单位之间插入一个空格或其它标点是错误的。" @@ -25408,6 +29117,12 @@ msgstr "Link" msgid "Linking elements must not be nested within other linking elements (including themselves). The processing of nested linking elements is undefined." msgstr "链接元素禁止嵌套在其它链接元素(包括它们自己)中。嵌套链接元素的处理是未知的。" +msgid "List" +msgstr "列表" + +msgid "List Characteristics" +msgstr "列表特性" + #. Resource IDs: (3605) msgid "" "List Help topics\n" @@ -25416,6 +29131,61 @@ msgstr "" "列出帮助主题\n" "帮助主题" +msgid "List Helpbot: %(requestaddr)s" +msgstr "列表帮助机器人： %(requestaddr)s" + +msgid "List Identity" +msgstr "列表身份" + +msgid "List Owners: %(owneraddr)s" +msgstr "列表属主： %(owneraddr)s" + +msgid "List admin only" +msgstr "仅列表管理员" + +msgid "" +"List all mailing lists.\n" +"\n" +"Usage: %(program)s [options]\n" +"\n" +"Where:\n" +"\n" +" -a / --advertised\n" +" List only those mailing lists that are publically advertised\n" +"\n" +" --virtual-host-overview=domain\n" +" -V domain\n" +" List only those mailing lists that are homed to the given virtual\n" +" domain. This only works if the VIRTUAL_HOST_OVERVIEW variable is\n" +" set.\n" +"\n" +" -b / --bare\n" +" Displays only the list name, with no description.\n" +"\n" +" -h / --help\n" +" Print this text and exit.\n" +"\n" +msgstr "" +"列出所有的邮件列表。\n" +"\n" +"用法： %(program)s [options]\n" +"\n" +"其中：\n" +"\n" +" -a / --advertised\n" +" 只列出公开的邮件列表。\n" +"\n" +" --virtual-host-overview=domain\n" +" -V domain\n" +" 只列出指定虚拟域中的邮件列表。此选项仅在设置了VIRTUAL_HOST_OVERVIEW\n" +" 变量后才有作用。\n" +"\n" +" -b / --bare\n" +" 仅显示列表名，没有任何描述。\n" +"\n" +" -h / --help\n" +" 打印此帮助信息并退出。\n" + msgid "" "List all properties on files, dirs, or revisions.\n" "usage: 1. proplist [TARGET[@REV]...]\n" @@ -25434,6 +29204,152 @@ msgstr "" " 2、列出版本库中版本的属性。TARGET只用来判断访问哪个版本库。\n" msgid "" +"List all the members of a mailing list.\n" +"\n" +"Usage: %(PROGRAM)s [options] listname\n" +"\n" +"Where:\n" +"\n" +" --output file\n" +" -o file\n" +" Write output to specified file instead of standard out.\n" +"\n" +" --regular / -r\n" +" Print just the regular (non-digest) members.\n" +"\n" +" --digest[=kind] / -d [kind]\n" +" Print just the digest members. Optional argument can be \"mime\" or\n" +" \"plain\" which prints just the digest members receiving that kind of\n" +" digest.\n" +"\n" +" --nomail[=why] / -n [why]\n" +" Print the members that have delivery disabled. Optional argument can\n" +" be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which prints just the\n" +" users who have delivery disabled for that reason. It can also be\n" +" \"enabled\" which prints just those member for whom delivery is\n" +" enabled.\n" +"\n" +" --fullnames / -f\n" +" Include the full names in the output.\n" +"\n" +" --preserve / -p\n" +" Output member addresses case preserved the way they were added to the\n" +" list. Otherwise, addresses are printed in all lowercase.\n" +"\n" +" --invalid / -i\n" +" Print only the addresses in the membership list that are invalid.\n" +" Ignores -r, -d, -n.\n" +"\n" +" --unicode / -u\n" +" Print addresses which are stored as Unicode objects instead of normal\n" +" string objects. Ignores -r, -d, -n.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +" listname is the name of the mailing list to use.\n" +"\n" +"Note that if neither -r or -d is supplied, both regular members are printed\n" +"first, followed by digest members, but no indication is given as to address\n" +"status.\n" +msgstr "" +"列出一个邮件列表中的所有成员。\n" +"\n" +"用法： %(PROGRAM)s [options] listname\n" +"\n" +"其中：\n" +"\n" +" --output file\n" +" -o file\n" +" 把输出写到指定的文件中，而不是标准输出。\n" +"\n" +" --regular / -r\n" +" 仅列出普通(非摘要)成员。\n" +"\n" +" --digest[=kind] / -d [kind]\n" +" 仅列出摘要成员。可选的参数可以是\"mime\"或者\"plain\"，将仅列出接收相应种类\n" +" 摘要的摘要成员。\n" +"\n" +" --nomail[=why] / -n [why]\n" +" 列出禁止投递的成员。可选的参数可以是\"byadmin\", \"byuser\", \"bybounce\",\n" +" 或者\"unknown\"，将仅列出因相应原因禁止投递的成员。也可以是\"enabled\"，这样\n" +" 将仅列出未禁止投递的成员。\n" +"\n" +" --fullnames / -f\n" +" 在输出中包含完整的名字。\n" +"\n" +" --preserve / -p\n" +" 以成员订阅列表时使用的大小写形式输出成员地址。否则的话，所有地址都将以\n" +" 小写字母显示。\n" +"\n" +" --invalid / -i\n" +" 仅列出成员列表中无效的地址。忽略 -r, -d, -n。\n" +"\n" +" --unicode / -u\n" +" 列出以Unicode对象而非普通字符串对象形式存储的地址。忽略 -r, -d, -n。\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息然后退出。\n" +"\n" +" listname是要使用的邮件列表名。\n" +"\n" +"注意，如果-r和-d选项都没有指定，将先列出普通成员，然后列出摘要成员，但是不会\n" +"给出地址状态的指示。\n" + +msgid "" +"List all the owners of a mailing list.\n" +"\n" +"Usage: %(program)s [options] listname ...\n" +"\n" +"Where:\n" +"\n" +" --all-vhost=vhost\n" +" -v=vhost\n" +" List the owners of all the mailing lists for the given virtual host.\n" +"\n" +" --all\n" +" -a\n" +" List the owners of all the mailing lists on this system.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +"`listname' is the name of the mailing list to print the owners of. You can\n" +"have more than one named list on the command line.\n" +msgstr "" +"列出一个邮件列表的所有属主。\n" +"\n" +"用法： %(program)s [options] listname ...\n" +"\n" +"其中：\n" +"\n" +" --all-vhost=vhost\n" +" -v=vhost\n" +" 列出指定虚拟主机上所有邮件列表的属主。\n" +"\n" +" --all\n" +" -a\n" +" 列出此系统中所有邮件列表的属主。\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息并退出。\n" +"\n" +"'listname'是要列出属主的邮件列表名。可以在命令行上指定多个列表。\n" + +msgid "List already exists: %(listname)s" +msgstr "列表已经存在: %(listname)s" + +msgid "List already exists: %(safelistname)s" +msgstr "列表已经存在: %(safelistname)s" + +msgid "List creator's (authentication) password:" +msgstr "列出创建者的(认证)密码:" + +msgid "" "List directory entries in the repository.\n" "usage: list [TARGET[@REV]...]\n" "\n" @@ -25469,10 +29385,128 @@ msgstr "" " 大小 (以字节为单位)\n" " 最后一次提交的日期与时间\n" +msgid "List members" +msgstr "列表成员" + +msgid "" +"List moderators (and list administrators) are sent daily\n" +" reminders of requests pending approval, like subscriptions to a\n" +" moderated list, or postings that are being held for one reason or\n" +" another. Setting this option causes notices to be sent\n" +" immediately on the arrival of new requests as well." +msgstr "" +"像对一个延缓列表的订阅，或因某种原因而被延缓的邮件所做的那样，给列表管理员\n" +"\t\t\t\t\t\t\t发送关于未批准请求的每日提醒。设定这个选项同样会导致新请求一到达\n" +"\t\t\t\t\t\t\t就立刻发通知给列表管理员。" + +msgid "List my other subscriptions" +msgstr "列出我的所有订阅" + +msgid "List name is required" +msgstr "需要列表名" + +msgid "List name is required." +msgstr "列表名称是必需的." + +msgid "List name must not include \"@\": %(safelistname)s" +msgstr "列表名称不能包含 \"@\": %(safelistname)s" + +msgid "List name: %(listname)s" +msgstr "列表名： %(listname)s" + +msgid "" +"List of addresses which are banned from membership in this\n" +" mailing list." +msgstr "被禁止加入列表的地址清单。" + +msgid "" +"List of non-member addresses whose postings should be\n" +" automatically accepted." +msgstr "其信件应当被自动接受的非成员地址清单。" + +msgid "" +"List of non-member addresses whose postings will be\n" +" automatically discarded." +msgstr "所发信件会被自动丢弃的非成员地址清单。" + +msgid "" +"List of non-member addresses whose postings will be\n" +" automatically rejected." +msgstr "所发信件会被自动拒绝的非成员地址清单。" + +msgid "" +"List of non-member addresses whose postings will be\n" +" immediately held for moderation." +msgstr "所发信件会被立即暂存以待审查的非成员地址清单" + #. (para) msgid "List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has less than five)." msgstr "与作者一样，在扉页上列出承担修改版本中的修改的作者责任的一个或多个人或实体和至少五个文档的原作者 (如果原作者不足五个就全部列出)。" +msgid "List password:" +msgstr "列表管理口令：" + +msgid "List subscriptions for %(safeuser)s on %(hostname)s" +msgstr "为 %(safeuser)s 列出在 %(hostname)s 上的订阅" + +msgid "" +"List the owners of a mailing list, or all mailing lists.\n" +"\n" +"Usage: %(PROGRAM)s [options] [listname ...]\n" +"Options:\n" +"\n" +" -w / --with-listnames\n" +" Group the owners by list names and include the list names in the\n" +" output. Otherwise, the owners will be sorted and uniquified based on\n" +" the email address.\n" +"\n" +" -m / --moderators\n" +" Include the list moderators in the output.\n" +"\n" +" -h / --help\n" +" Print this help message and exit.\n" +"\n" +" listname\n" +" Print the owners of the specified lists. More than one can appear\n" +" after the options. If there are no listnames provided, the owners of\n" +" all the lists will be displayed.\n" +msgstr "" +"列出一个或所有邮件列表的属主。\n" +"\n" +"用法： %(PROGRAM)s [options] [listname ...]\n" +"选项：\n" +"\n" +" -w / --with-listnames\n" +" 把属主按列表名分组，并且在输出中包含列表名。否则，属主将按\n" +" 邮件地址排序，并且重复的地址将被删去。\n" +"\n" +" -m / --moderators\n" +" 在输出中包括列表管理员。\n" +"\n" +" -h / --help\n" +" 打印此帮助信息然后退出。\n" +"\n" +" listname\n" +" 打印指定列表的属主。可以在选项后指定多个列表。如果未指定列表，所有\n" +" 列表的属主都将被打印。\n" + +msgid "List topic keywords" +msgstr "列表主题关键字" + +msgid "List traffic archival policies." +msgstr "列表通讯存档策略" + +msgid "" +"List-specific text prepended to new-subscriber welcome\n" +" message" +msgstr "添加到新订阅者欢迎消息前的列表说明文本" + +msgid "List:" +msgstr "列表:" + +msgid "List: %(listname)s, \tOwners: %(owners)s" +msgstr "列表： %(listname)s, \t属主： %(owners)s" + #. (title) msgid "Lists" msgstr "列表" @@ -25489,6 +29523,9 @@ msgstr "Literal" msgid "LiteralLayout" msgstr "LiteralLayout" +msgid "Lithuanian" +msgstr "立陶宛语" + #. (seg) msgid "Little Rock" msgstr "Little Rock" @@ -25497,6 +29534,9 @@ msgstr "Little Rock" msgid "Load Images" msgstr "载入图片" +msgid "Loading list %(listname)s" +msgstr "加载列表 %(listname)s" + #, c-format msgid "Local URL '%s' contains only a hostname, no path" msgstr "本地URL“%s”只有主机名称，没有路径" @@ -25704,6 +29744,9 @@ msgstr "日志项丢失“name”属性 (入口“%s”对应目录“%s”)" msgid "Log entry not a list" msgstr "日志条目不是列表" +msgid "Log in" +msgstr "登录" + #. Resource IDs: (1386) msgid "Log message" msgstr "日志信息" @@ -25726,6 +29769,9 @@ msgstr "日志信息(输入对话框)" msgid "Log messages (Show log dialog)" msgstr "日志信息(显示日志对话框)" +msgid "Log out" +msgstr "退出登录" + msgid "Log path entry not a string" msgstr "日志路径入口不是字符串" @@ -25736,6 +29782,9 @@ msgstr "日志 revprop 入口不是字符串" msgid "Logical Divisions: The Categories of Elements in DocBook" msgstr "逻辑分割：DocBook 元素类别" +msgid "Logout" +msgstr "注销" + #. (title) msgid "Loops" msgstr "循环" @@ -25757,6 +29806,9 @@ msgstr "最低显示版本 %ld - 最高显示版本：%ld - 最新版本：%ld" msgid "MD5 checksum is missing" msgstr "没有 MD5 校验和" +msgid "MIME" +msgstr "MIME" + #, c-format msgid "MIME type '%s' does not contain '/'" msgstr "MIME 类型 “%s” 没有包含 “/”" @@ -25781,10 +29833,64 @@ msgstr "修改" msgid "Maden" msgstr "Maden" +msgid "Mail delivery" +msgstr "邮件投递" + #. Resource IDs: (3866) msgid "Mail system DLL is invalid." msgstr "邮件系统 DLL 无效。" +msgid "Mail<->News gateways" +msgstr "邮件<-->新闻网关" + +msgid "Mail-to-News and News-to-Mail gateway services." +msgstr "Mail-to-News和News-to-Mail网关服务" + +msgid "Mailing list creation request for list %(listname)s" +msgstr "邮件列表 %(listname)s 创建请求" + +msgid "Mailing list creation results" +msgstr "创建邮件列表的结果" + +msgid "Mailing list deletion results" +msgstr "邮件列表删除结果" + +msgid "Mailing list removal request for list %(listname)s" +msgstr "对邮件列表 %(listname)s 的删除请求" + +msgid "Mailman" +msgstr "Mailman" + +msgid "Mailman %(varname)s List Option Help" +msgstr "Mailman %(varname)s 列表选项帮助" + +msgid "Mailman Administrative Database Error" +msgstr "Mailman 管理数据库 错误" + +msgid "" +"Mailman prefixes Subject: headers with\n" +" text you can\n" +" customize and normally, this prefix shows up in messages\n" +" gatewayed to Usenet. You can set this option to No to\n" +" disable the prefix on gated messages. Of course, if you turn off\n" +" normal Subject: prefixes, they won't be prefixed for\n" +" gated messages either." +msgstr "" +"Mailman以\n" +" 您可以定制的文本作为内容添加Subject:头部。并且在正\n" +" 常情况下，这个前缀显示在经网关\n" +" 路由到新闻组的信件中。你可以把此选项设定为否以禁止在被路由\n" +" 信件中添加前缀。当然，如果你关闭正常的Subject:前缀，\n" +" 它们也将不会出现为被路由信件的前缀。" + +msgid "Mailman privacy alert" +msgstr "Mailman内部警告" + +msgid "" +"Mailman won't accept the given email address as a valid address.\n" +"(E.g. it must have an @ in it.)" +msgstr "您输入的地址不是Mailman的有效地址(如:地址中必须有@)。" + #. (para) msgid "Major versions (such as V3.0) could both add to the markup model and make backward-incompatible changes. However, the changes would have to be announced in the last major release." msgstr "主版本(例如 V3.0) 可以增加标记和产生向后不兼容的修改。然而，这些修改必须在主版本发布的最后声明。" @@ -25801,6 +29907,13 @@ msgstr "创建表达式" msgid "Make this the default" msgstr "设为默认值" +msgid "" +"Make your changes in the following section, then submit them\n" +" using the Submit Your Changes button below." +msgstr "" +"修改以下部分, 然后用\n" +" 提交您的修改按钮提交它们。" + #. (title) msgid "Making Front- and Backmatter" msgstr "创建向前引用或向后引用" @@ -25900,6 +30013,39 @@ msgstr "node-rev 中有非法的文本版本偏移行" msgid "Manage Subversion properties" msgstr "管理 Subversion 属性" +msgid "" +"Many (in fact, most) spams do not explicitly name their\n" +" myriad destinations in the explicit destination addresses - in\n" +" fact often the To: field has a totally bogus address for\n" +" obfuscation. The constraint applies only to the stuff in the\n" +" address before the '@' sign, but still catches all such spams.\n" +"\n" +"

    The cost is that the list will not accept unhindered any\n" +" postings relayed from other addresses, unless\n" +"\n" +"

      \n" +"
    1. The relaying address has the same name, or\n" +"\n" +"
    2. The relaying address name is included on the options that\n" +" specifies acceptable aliases for the list.\n" +"\n" +"
    " +msgstr "" +"很多(事实上是绝大多数)垃圾邮件都不是把它们那无数的目的地\n" +" 直接的放到目的地址中 - 事实上To:字段经常只有伪造的虚假地址。\n" +" 此限制仅仅应用到目的地址中'@'前面的部分，但是这样也能捕获\n" +" 所有的这种垃圾邮件。\n" +"\n" +"

    这样做的代价是，列表将不再接受从其他地址中继过来的正常信件，\n" +" 除非\n" +"\n" +"

      \n" +"
    1. 中继地址有着同样的名字，或者\n" +"\n" +"
    2. 可接受的别名清单中包含此中继地址。\n" +"\n" +"
    " + #. (para) msgid "Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and O'Reilly Media, Inc. was aware of a trademark claim, the designations have been printed in caps or initial caps. While every precaution has been taken in the preparation of this book, the publisher assumes no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein." msgstr "Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and O'Reilly Media, Inc. was aware of a trademark claim, the designations have been printed in caps or initial caps. While every precaution has been taken in the preparation of this book, the publisher assumes no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein." @@ -25908,6 +30054,12 @@ msgstr "Many of the designations used by manufacturers and sellers to distinguis msgid "Mapping System Identifiers for XML" msgstr "为 XML 映射系统标示符" +msgid "Mar" +msgstr "三月" + +msgid "March" +msgstr "三月" + #. Resource IDs: (32808) msgid "Mark as &resolved" msgstr "标记为已解决(&R)" @@ -25948,6 +30100,18 @@ msgstr "标记" msgid "Martin" msgstr "Martin" +msgid "Mass Removals" +msgstr "批量删除" + +msgid "Mass Subscriptions" +msgstr "批量订阅" + +msgid "Mass Removal" +msgstr "批量移除" + +msgid "Mass Subscription" +msgstr "批量订阅" + #. Resource IDs: (1064) msgid "Match &case" msgstr "区分大小写(&C)" @@ -25976,6 +30140,14 @@ msgstr "日志中保留的最大条目数量" msgid "Max. lines in action log" msgstr "动作记录最大行数" +msgid "" +"Maximum length in kilobytes (KB) of a message body. Use 0\n" +" for no limit." +msgstr "邮件正文最大长度(以千字节为单位的)。0表示无限制。" + +msgid "May" +msgstr "五月" + #. (para) msgid "May be formatted inline or as a displayed block, depending on context." msgstr "可以格式化在行内或显示块，这依赖于上下文环境。" @@ -26012,6 +30184,27 @@ msgstr "可能格式化在行内或显示块，依赖于上下文环境。主题 msgid "May be formatted inline or as a displayed block, depending on context.Insert the text." msgstr "可以格式化在行内或显示块，依赖于上下文环境。插入文本。" +msgid "Member filters" +msgstr "成员过滤器" + +msgid "Member name successfully changed. " +msgstr "成员姓名修改成功" + +msgid "Membership List" +msgstr "成员列表" + +msgid "Membership exposure" +msgstr "成员身份公布" + +msgid "Membership re-enabled." +msgstr "成员重新有效" + +msgid "Membership List" +msgstr "成员列表" + +msgid "Membership Management..." +msgstr "成员管理..." + #. (tag) msgid "MenuChoice" msgstr "MenuChoice" @@ -26136,6 +30329,29 @@ msgstr "合并版本 %s 于 %s 到 %s，%s%s" msgid "Message" msgstr "信息" +msgid "Message Excerpt:" +msgstr "消息摘要:" + +msgid "Message Headers:" +msgstr "消息头部:" + +msgid "" +"Message body is too big: %(size)d bytes with a limit of\n" +"%(limit)d KB" +msgstr "信件内容过大：%(size)d 字节 (上限为 %(limit)d KB)" + +msgid "Message has a suspicious header" +msgstr "信件带有可疑的邮件头" + +msgid "Message has implicit destination" +msgstr "信息中含有隐式的目的地" + +msgid "Message may contain administrivia" +msgstr "消息中包含管理指令" + +msgid "Message rejected by filter rule match" +msgstr "由于匹配过滤规则而被拒绝的信件" + #. Resource IDs: (1241) msgid "Message:" msgstr "信息：" @@ -26401,6 +30617,15 @@ msgstr "开始标记拼写错误" msgid "Mixed" msgstr "混合" +msgid "Moderated" +msgstr "节制的" + +msgid "Moderator" +msgstr "主持人" + +msgid "Moderator passwords did not match" +msgstr "主持者密码不匹配" + #. Resource IDs: (208) msgid "Modification date" msgstr "修改日期" @@ -26448,14 +30673,23 @@ msgstr "模块只能操作BDB版本库。" msgid "Module for working with a plain file (FSFS) repository." msgstr "模块与文本文件(FSFS)版本库一起工作。" +msgid "Mon" +msgstr "星期一" + #. (seg) msgid "Montgomery" msgstr "Montgomery" +msgid "Monthly" +msgstr "每月" + #. Resource IDs: (438) msgid "More colors..." msgstr "更多颜色..." +msgid "More information: %(listurl)s" +msgstr "更多信息： %(listurl)s" + #. (para) msgid "Most steps in a procedure are sequential: do the first, then the second, then the third. Sometimes procedures provide an explicit ordering: do step 7 next." msgstr "绝大多数在 procedure 中的 step 是顺序的：先做第一步，然后是第二步，然后是第三步。有时，过程会提供一个显式的顺序：下面进行第7步。" @@ -26543,6 +30777,12 @@ msgstr "" msgid "Move items to here" msgstr "移动项到此" +msgid "Move rule down" +msgstr "下移规则" + +msgid "Move rule up" +msgstr "上移规则" + #. Resource IDs: (209) msgid "Move to changelist" msgstr "移动到修改列表" @@ -26611,6 +30851,16 @@ msgstr "遇到了多个版本参数；请使用“-r N:M”代替“-r M -r N” msgid "Murray Maloney, SCO" msgstr "Murray Maloney，SCO" +msgid "Must have a listname and a filename" +msgstr "必须有一个列表名和文件名" + +msgid "" +"Must posts have list named in destination (to, cc) field\n" +" (or be among the acceptable alias names, specified below)?" +msgstr "" +"信件的目的地址(to,cc)必须包含此列表的地址(或在下面指定的\n" +" 可接受的别名)吗？" + msgid "Must specify the revision as a number, a date or 'HEAD' when operating on a revision property" msgstr "操作版本属性时，必须指定数字、日期形式的版本号或“HEAD”。" @@ -26646,6 +30896,12 @@ msgstr "文件系统无此文件" msgid "Name is not a single path component" msgstr "名称不是单一路径" +msgid "Name of list:" +msgstr "列表名称:" + +msgid "Name:" +msgstr "名字：" + #, c-format msgid "Name: %s\n" msgstr "名称: %s\n" @@ -26666,6 +30922,9 @@ msgstr "Nancy Paisner，Hitachi Computer Products" msgid "Narrow the range of values in an attribute to a specific list or a fixed value" msgstr "缩窄属性值域为一个指定的列表或固定值" +msgid "Natural language (internationalization) options." +msgstr "自然语言(国际化)选项。" + #. (term) msgid "Navigational Components" msgstr "导航组件" @@ -26702,6 +30961,9 @@ msgstr "网络读写错误" msgid "Network socket initialization failed" msgstr "创建网络套接字失败" +msgid "Never" +msgstr "从不" + #. Resource IDs: (199) msgid "Never try to contact the repository again" msgstr "不再尝试连接版本库" @@ -26710,6 +30972,12 @@ msgstr "不再尝试连接版本库" msgid "New" msgstr "新增" +msgid "New %(listname)s password: %(notifypassword)s" +msgstr "%(listname)s的新口令： %(notifypassword)s" + +msgid "New %(pwdesc)s password: " +msgstr "新 %(pwdesc)s 口令" + #. Resource IDs: (1076) msgid "New &name:" msgstr "新名称(&N)：" @@ -26730,6 +30998,21 @@ msgstr "%s 的新名称" msgid "New name:" msgstr "新名称：" +msgid "New password for member %(member)40s: %(randompw)s" +msgstr "成员 %(member)40s的新密码： %(randompw)s" + +msgid "New subscription request to list %(realname)s from %(addr)s" +msgstr "来自 %(addr)s 的对 %(realname)s 列表的订阅请求" + +msgid "New unsubscription request from %(realname)s by %(addr)s" +msgstr "来自 %(addr)s 的对 %(realname)s 列表的退订请求" + +msgid "News server settings" +msgstr "新闻服务器设置" + +msgid "Next message:" +msgstr "下一条消息" + #. Resource IDs: (73) msgid "No" msgstr "否" @@ -26758,6 +31041,12 @@ msgstr "没有 SUBDOC 或 CDATA 外部实体" msgid "No User Servicable Parts Inside" msgstr "No User Servicable Parts Inside" +msgid "No address given" +msgstr "没有给出地址" + +msgid "No argument to -f given" +msgstr "没有给出-f的参数" + msgid "No auth file path available" msgstr "未提供 auth 文件路径" @@ -26772,10 +31061,16 @@ msgstr "属性 “%s” 于 “%s” 没有改变\n" msgid "No changes to property '%s' on revision %ld\n" msgstr "属性 “%s” 于版本 %ld 没有改变\n" +msgid "No child with pid: %(pid)s" +msgstr "进程: %(pid)s 没有子进程" + #. (para) msgid "No column separator rule." msgstr "没有列分隔符规则。" +msgid "No command given." +msgstr "没有提供命令。" + #. Resource IDs: (81) #, c-format msgid "" @@ -26791,6 +31086,13 @@ msgstr "" msgid "No command value specified!" msgstr "没有指定命令值！" +msgid "" +"No commands were found in this message.\n" +"To obtain instructions, send a message containing just the word \"help\".\n" +msgstr "" +"该邮件中没有发现指令。\n" +"发送内容为 \"help\" 的信件以获得所有命令.\n" + msgid "No commits in repository" msgstr "版本库中没有提交" @@ -26836,6 +31138,9 @@ msgstr "没有外部合并工具可用" msgid "No fetch_func supplied to update_editor" msgstr "没有为 update_editor 提供 fetch_func" +msgid "No filename given." +msgstr "没有给出文件名" + #. (para) msgid "No filename may be more than MAXPATHLEN characters long." msgstr "No filename may be more than MAXPATHLEN characters long." @@ -26887,6 +31192,18 @@ msgstr "没有找到适用于 %s 的图像解码器。" msgid "No labels" msgstr "没有标签" +msgid "No list name supplied." +msgstr "没有给出列表的名字" + +msgid "No list named:" +msgstr "没有指定列表:" + +msgid "No listname given" +msgstr "没给出列表名" + +msgid "No lists to search" +msgstr "没有要搜索的列表" + #, c-format msgid "No lock on path '%s' in filesystem '%s'" msgstr "路径 “%s” 没有锁，其文件系统是 “%s”" @@ -26894,12 +31211,18 @@ msgstr "路径 “%s” 没有锁，其文件系统是 “%s”" msgid "No lock token provided" msgstr "没有提供锁定令牌" +msgid "No matching mailing lists found" +msgstr "没有找到匹配的邮件列表" + msgid "No merge tool found, leaving all conflicts." msgstr "没有发现合并工具，不处理冲突。" msgid "No merge tool found.\n" msgstr "没有发现合并工具。\n" +msgid "No one can subscribe to the digest of this list!" +msgstr "此列表不支持订阅摘要!" + #, c-format msgid "No part of path '%s' was found in repository HEAD" msgstr "路径“%s”的任何部分都不在版本库的 HEAD 中" @@ -26910,6 +31233,12 @@ msgstr "没有路径名称前缀“:”" msgid "No paths to unlock provided" msgstr "没有提供解锁的路径" +msgid "No problems found" +msgstr "没有发现问题" + +msgid "No reason given" +msgstr "没有给出原因" + #, c-format msgid "No record in 'node-origins' table for node id '%s' in filesystem '%s'" msgstr "在 “node-origins” 表中没有节点 “%s” 的记录，其文件系统是 “%s”" @@ -26922,6 +31251,9 @@ msgstr "没有行分隔符规则。" msgid "No rules. This is the default value." msgstr "没有边线。这是默认值。" +msgid "No runner name given." +msgstr "没提供管理器的名字。" + #. (para) msgid "No sides. This is the default value." msgstr "没有边。这是默认值。" @@ -26934,6 +31266,9 @@ msgstr "没有要修正的拼写" msgid "No status cache. Only versioned folders get an overlay, files don't get an overlay" msgstr "无状态缓存。仅影响版本控制的文件夹，不影响文件" +msgid "No subject" +msgstr "无主题" + msgid "No such XML tag attribute" msgstr "没有这种XML标签属性" @@ -26941,6 +31276,31 @@ msgstr "没有这种XML标签属性" msgid "No such entry: '%s'" msgstr "无此条目:“%s”" +msgid "" +"No such list \"%(listname)s\"\n" +"%(e)s" +msgstr "" +"列表\"%(listname)s\"不存在\n" +"%(e)s" + +msgid "No such list (or list already deleted): %(listname)s" +msgstr "没有这个列表(或者列表已经被删除了): %(listname)s" + +msgid "No such list %(safelistname)s" +msgstr "没有类似的列表 %(safelistname)s" + +msgid "No such list: %(listname)s" +msgstr "没有此列表： %(listname)s" + +msgid "No such list: %(listname)s. Removing its residual archives." +msgstr "没有这个列表: %(listname)s。正在删除它的残留的文件。" + +msgid "No such member: %(addr)s" +msgstr "没有这个成员: %(addr)s" + +msgid "No such member: %(safeuser)s." +msgstr "不存在 %(safeuser)s 这个成员." + #, c-format msgid "No such representation '%s'" msgstr "没有修订版“%s”" @@ -26974,6 +31334,9 @@ msgstr "路径 “%s” 没有令牌，其文件系统是 “%s”" msgid "No transaction named '%s' in filesystem '%s'" msgstr "事务 “%s” 不在文件系统 “%s” 中" +msgid "No updates are necessary." +msgstr "不需要升级" + msgid "No user associated with filesystem" msgstr "没有用户与文件系统关联" @@ -26985,6 +31348,9 @@ msgstr "No user-servicable parts inside. Breaking this seal voids all warranties msgid "No username is currently associated with filesystem '%s'" msgstr "文件系统“%s”当前没有用户名关联" +msgid "No valid address found to subscribe" +msgstr "订阅的地址无效" + #, c-format msgid "No valid copyfrom revision in filtered stream" msgstr "在过滤流中没有有效的copyfrom版本" @@ -26997,6 +31363,9 @@ msgstr "在过滤流中没有有效的版本范围 “end”" msgid "No valid revision range 'start' in filtered stream" msgstr "在过滤流中没有有效的版本范围 “start”" +msgid "No valid variable name found." +msgstr "找不到有效的变量名。" + msgid "No versioned parent directories" msgstr "没有受版本控制的父目录" @@ -27048,12 +31417,27 @@ msgstr "节点版本“%s@%ld”声称有合并信息，实际上却没有" msgid "Non-ASCII character (code %d) detected, and unable to convert to/from UTF-8" msgstr "检测到非ASCII字符 (代码 %d)，并且不能转换到/自 UTF-8" +msgid "Non-digest (regular) members:" +msgstr "没订阅摘要(普通的)的成员:" + +msgid "Non-digest options" +msgstr "非摘要(Non-digest)选项" + +msgid "Non-member filters" +msgstr "非成员过滤器" + +msgid "Non-members are not allowed to post messages to this list." +msgstr "不允许非成员往该列表发送信息。" + msgid "Non-numeric change argument given to -c" msgstr "-c 选项的取值不是数字" msgid "Non-numeric limit argument given" msgstr "--limit取值不是数字" +msgid "Non-standard property restored: %(k)s" +msgstr "非标准属性复位： %(k)s" + msgid "Non-string as part of file contents" msgstr "部份文件内容不是字符串" @@ -27064,6 +31448,33 @@ msgstr "部分文件差异不是字符串" msgid "None" msgstr "无" +msgid "" +"None - no verification steps (Not\n" +" Recommended )
    \n" +" Confirm (*) - email confirmation step required
    \n" +" Require approval - require list administrator\n" +" Approval for subscriptions
    \n" +" Confirm and approve - both confirm and approve\n" +" \n" +"

    (*) when someone requests a subscription,\n" +" Mailman sends them a notice with a unique\n" +" subscription request number that they must reply to\n" +" in order to subscribe.
    \n" +"\n" +" This prevents mischievous (or malicious) people\n" +" from creating subscriptions for others without\n" +" their consent." +msgstr "" +"无 - 无认证步骤( 不推荐使用 )
    \n" +" 确认 (*) - 要求有邮件确认步骤
    \n" +" 要求核准 - 需要列表管理员核准订阅
    \n" +" 确认并核准 - 即要求确认,也需要管理员核准\n" +" \n" +"

    (*) 当有人请求订阅时，Mailman给他发送带有唯一订阅请\n" +" 求号的的通知，如果他要订阅，必须回信。\n" +"\n" +" 这用来防止恶意用户不经他人同意而为其订阅。" + msgid "None of the environment variables SVN_EDITOR, VISUAL or EDITOR are set, and no 'editor-cmd' run-time configuration option was found" msgstr "没有设置 SVN_EDITOR，VISUAL 或 EDITOR 环境变量，运行时的配置参数中也没有 “editor-cmd” 选项" @@ -27082,6 +31493,79 @@ msgstr "Norm 是许多影响世界的标准的活跃参与者，包括 XML 核 msgid "Normal" msgstr "正常" +msgid "" +"Normally, Mailman sends the regular delivery messages to\n" +" the mail server in batches. This is much more efficent\n" +" because it reduces the amount of traffic between Mailman and\n" +" the mail server.\n" +"\n" +"

    However, some lists can benefit from a more personalized\n" +" approach. In this case, Mailman crafts a new message for\n" +" each member on the regular delivery list. Turning this\n" +" feature on may degrade the performance of your site, so you\n" +" need to carefully consider whether the trade-off is worth it,\n" +" or whether there are other ways to accomplish what you want.\n" +" You should also carefully monitor your system load to make\n" +" sure it is acceptable.\n" +"\n" +"

    Select No to disable personalization and send\n" +" messages to the members in batches. Select Yes to\n" +" personalize deliveries and allow additional substitution\n" +" variables in message headers and footers (see below). In\n" +" addition, by selecting Full Personalization, the\n" +" To header of posted messages will be modified to\n" +" include the member's address instead of the list's posting\n" +" address.\n" +"\n" +"

    When personalization is enabled, a few more expansion\n" +" variables that can be included in the message header and\n" +" message footer.\n" +"\n" +"

    These additional substitution variables will be available\n" +" for your headers and footers, when this feature is enabled:\n" +"\n" +"

    • user_address - The address of the user,\n" +" coerced to lower case.\n" +"
    • user_delivered_to - The case-preserved address\n" +" that the user is subscribed with.\n" +"
    • user_password - The user's password.\n" +"
    • user_name - The user's full name.\n" +"
    • user_optionsurl - The url to the user's option\n" +" page.\n" +"
    \n" +" " +msgstr "" +"一般来说,Mailman把普通投递信息批量的送给邮件服务器.这样\n" +" 做更有效率,因为它减少了Mailman和邮件服务器之间的通讯量.\n" +"\n" +"

    但是,更个性化的设置对一些列表可能会很有帮助.在这种情况下\n" +" Mailman为普通投递列表中的每一个成员均提交一份新的信息.打开\n" +" 此特性可能会降低您站点的性能,所以您应该好好考虑一下,这个交易\n" +" 是否合算,或者是否有其它的方式来完成您想要的效果.您应该小心的\n" +" 监视您的系统负载,以确保您所花的代价是可承受的.\n" +"\n" +"

    选择否来禁止个性化设置,批量向成员投递信息.选择\n" +" 是来个性化您的投递,并且允许在消息头和消息尾施用额外\n" +" 的替换变量(参考下面的内容).此外,通过选择完全的个性化,\n" +" 所发信息的To头部会被修改以包含成员的地址而非列表\n" +" 的发信地址.\n" +"\n" +" 当个性化启用时,可以在\n" +" 信息头和信息尾使用少量\n" +" 的额外替换变量.\n" +"\n" +"

    当此特性开启时,如下的额外的替换变量可以在信息的头部或者尾\n" +" 部使用:\n" +"\n" +"

    " + #. (firstname) msgid "Norman" msgstr "Norman" @@ -27098,6 +31582,9 @@ msgstr "Norman Walsh。" msgid "Norwegian" msgstr "挪威语" +msgid "Not a valid email address: %(toaddr)s" +msgstr "非法email地址： %(toaddr)s" + #. Resource IDs: (3857) msgid "Not all of the system registry entries (or INI file) were removed." msgstr "没有删除全部的注册表项（或 INI 文件）。" @@ -27105,6 +31592,9 @@ msgstr "没有删除全部的注册表项（或 INI 文件）。" msgid "Not all required revisions are specified" msgstr "没有全部提供需要的版本" +msgid "Not authenticated" +msgstr "无法鉴别" + msgid "Not authorized to open root of edit operation" msgstr "无权打开根进行编辑操作" @@ -27125,10 +31615,30 @@ msgstr "内存不足，无法完成操作。" msgid "Not recursive" msgstr "非递归" +msgid "Not removing archives. Reinvoke with -a to remove them." +msgstr "没有删除文件。带上 -a再调用一遍命令来删除它们。" + +msgid "Not subscribed" +msgstr "没有订阅" + #. (para) msgid "Note that the glossterm tag reappears in the glossary to mark up the term and distinguish it from its definition within the glossentry. The id that the glossentry referenced in the text is the ID of the glossentry in the glossary itself. You can use the link between source and glossary to create a link in the online form of your document, as we have done with the online form of the glossary in this book." msgstr "请注意在术语表中再次出现的 glossterm 标记以及它与在 glossentry 中的定义的不同之处。在文本中 glossentry 引用的 id 是 glossary 的 ID 本身。可以使用链接在文档的在线表单中的源和术语表之间创建链接，就像我们已在本书的在线的术语表中所做的一样。" +msgid "" +"Note: Since this is a list of mailing lists, administrative\n" +"notices like the password reminder will be sent to\n" +"your membership administrative address, %(addr)s." +msgstr "" +"注意: 由于这是一个邮件列表的清单, 口令提示函等管理通知会被发\n" +"送到您的成员管理地址, %(addr)s." + +msgid "Note: your list delivery is currently disabled%(reason)s." +msgstr "注意：你在列表中的发信权现在被禁止了，因为 %(reason)s。" + +msgid "Nothing to do." +msgstr "什么也不需要做." + #. Resource IDs: (88) msgid "Notice" msgstr "告示" @@ -27141,10 +31651,26 @@ msgstr "注意，def 属性不是html:form msgid "Ocurs when a form is submitted. It only applies to the html:form element." msgstr "当一个表单提交时触发。它仅用于 html:form 元素。" +msgid "Off" +msgstr "关" + #. (para) msgid "Often an empty index is used to indicate where the automatically generated index should be rendered." msgstr "一个空白的 index 经常用于指出自动生成的索引将呈现的位置。" @@ -27300,6 +31845,11 @@ msgstr "一个空白的 index 经常用于指出自动生成的索 msgid "Often it is important to assure that certain conditions exist before a procedure is performed, and that the outcome of the procedure matches the expected results. DocBook does not provide explicit semantic markup for these pre- and post-conditions. Instead, they must be described as steps (check the pre-conditions in the first step and the results in the last step), or described outside the body of the procedure." msgstr "通常，在过程执行前确定必需的条件已存在是非常重要的，并且过程的输出匹配期望的结果。DocBook 没有为这些前置和后置条件提供显式的语义标记。做为替换的，它们必须被描述为一个步骤(检查前置条件在第一个步骤，以及结果在最后一个步骤)，或者在过程体外描述。" +msgid "" +"Okay, the list moderator will still have the\n" +" opportunity to approve or reject this message." +msgstr "OK, 列表主持者仍然有机会批准或者拒绝这条信息." + #. Resource IDs: (65535) msgid "Older lines" msgstr "旧行" @@ -27316,6 +31866,9 @@ msgstr "省略外部(&X)" msgid "Omit externals" msgstr "省略外部" +msgid "On" +msgstr "开" + #. (para) msgid "On most DOS-derived systems, functions signal a File Not Found error by returning 2 (ENOENT). This is usually a recoverable (non-fatal) error." msgstr "On most DOS-derived systems, functions signal a File Not Found error by returning 2 (ENOENT). This is usually a recoverable (non-fatal) error." @@ -27336,10 +31889,16 @@ msgstr "基本上，msgset 的语义没有被清晰的定义。" msgid "Once a cell has been allocated to a column, subsequent cells may not fill preceding columns. In other words, while three cells can specify that they occur in columns 1, 3, and 5, they cannot specify that they occur in columns 1, 5, and 3. Once a column is passed, you can never go back." msgstr "当一个单元格被分配给一列时，后面的单元格不填充前面的列。换句话说，当三个单元格可以被指定出现在列1、3、5时，它们不能被指定出现在列1、5和3中。当经过了一列时，你就再也回不来了。" +msgid "Once a month, your password will be emailed to you as a reminder." +msgstr "你的口令将每月一次以提示函的形式发送给你。" + #. (para) msgid "One" msgstr "One" +msgid "One of -i or -o is required" +msgstr "-i和-o至少需要一个" + #. (refpurpose), (entry) msgid "One of a group of terms describing the subject matter of a document" msgstr "描述文档主旨的条目组之一" @@ -27367,6 +31926,46 @@ msgstr "" "\n" "你确认要删除这些目录吗?" +msgid "" +"One of these actions is taken when the message matches one of\n" +" the content filtering rules, meaning, the top-level\n" +" content type matches one of the filter_mime_types, or the top-level content type does\n" +" not match one of the\n" +" pass_mime_types, or if after filtering the subparts of the\n" +" message, the message ends up empty.\n" +"\n" +"

    Note this action is not taken if after filtering the message\n" +" still contains content. In that case the message is always\n" +" forwarded on to the list membership.\n" +"\n" +"

    When messages are discarded, a log entry is written\n" +" containing the Message-ID of the discarded message. When\n" +" messages are rejected or forwarded to the list owner, a reason\n" +" for the rejection is included in the bounce message to the\n" +" original author. When messages are preserved, they are saved in\n" +" a special queue directory on disk for the site administrator to\n" +" view (and possibly rescue) but otherwise discarded. This last\n" +" option is only available if enabled by the site\n" +" administrator." +msgstr "" +"当消息与内容过滤规则之一匹配, 将采取下列动作之一:\n" +" , 也就是说顶级内容类型与 过滤MIME类型之一匹配, 或者顶级内容类型\n" +" 不匹配 允许通过MIME类型中的任何一个,或者子部分被过滤后\n" +" 该消息已经变成了一个空消息.\n" +"\n" +"

    请注意如果过滤后的消息仍然还有内容, 则次动作不会被采取. 在那\n" +" 种情况下消息总会被发送给列表成员.\n" +"\n" +"

    当消息被放弃时, 会写入一个包含被放弃消息ID的消息项. 当消息被\n" +" 拒绝或者发向了列表所有者时, 原作者将收到包含被拒原因的退信. 当\n" +" 消息被滞留, 它被存储在磁盘上一个特殊的队列目录以便管理员查看\n" +" (也可能恢复这个消息), 但除此情况消息会被放弃. 最后这种选项只\n" +" 有当站点管理员允许时才有效." + #. (term), (para) msgid "One of:" msgstr "下列之一：" @@ -27418,6 +32017,12 @@ msgid "" "are allowed!" msgstr "仅可以输入数字（可以用逗号分隔）！" +msgid "Only one -f switch allowed" +msgstr "只允许一个-f开关" + +msgid "Only one of -i or -o is allowed" +msgstr "-i和-o中只能选择一个" + #, c-format msgid "Only one revision allowed" msgstr "只允许一个版本" @@ -27457,6 +32062,9 @@ msgstr "从剪贴板复制" msgid "Open image file..." msgstr "打开图像文件..." +msgid "Open list, moderated group" +msgstr "开放的列表，节制的组" + #. Resource IDs: (282) msgid "Open parent folder" msgstr "打开父目录" @@ -27542,6 +32150,12 @@ msgstr "本书的结构" msgid "Ori&ginal size" msgstr "原始大小(&G)" +msgid "Original Message" +msgstr "原文" + +msgid "Other Administrative Activities" +msgstr "其他管理事件" + #. (title) msgid "Other Modifications: Classifying a Role" msgstr "其它修改：任务分类" @@ -27614,6 +32228,9 @@ msgstr "" "覆写 svn:eol-style 属性设置。\n" "没有此属性的文件不受影响。" +msgid "Overview of all %(hostname)s mailing lists" +msgstr "%(hostname)s 上的所有邮件列表" + #. Resource IDs: (99) msgid "Overwrite" msgstr "覆盖" @@ -27642,6 +32259,9 @@ msgstr "PFA" msgid "PFB" msgstr "PFB" +msgid "PID unreadable in: %(pidfile)s" +msgstr "在: %(pidfile)s 中找不到PID" + #, c-format msgid "PIN for token \"%s\" in slot \"%s\"" msgstr "钉住令牌“%s”于通道“%s”" @@ -27753,14 +32373,44 @@ msgstr "明确的使用声明" msgid "Passphrase for '%s': " msgstr "“%s”的密码: " +msgid "Password // URL" +msgstr "口令 // URL" + +msgid "Password change failed." +msgstr "更改口令失败" + +msgid "Password changed." +msgstr "口令以更改" + #, c-format msgid "Password for '%s': " msgstr "“%s”的密码: " +msgid "Password reminder" +msgstr "口令提示函" + +msgid "Password successfully changed." +msgstr "密码修改成功" + #. Resource IDs: (69) msgid "Password:" msgstr "密码：" +msgid "Password: " +msgstr "口令：" + +msgid "Passwords" +msgstr "口令" + +msgid "Passwords did not match!" +msgstr "密码不匹配!" + +msgid "Passwords do not match; no changes made." +msgstr "口令不相同，未做改变" + +msgid "Passwords may not be blank" +msgstr "密码不能为空" + #. Resource IDs: (172) msgid "Paste filename list" msgstr "粘贴文件名列表" @@ -27892,6 +32542,12 @@ msgstr "路径名称没有以 “:” 结束" msgid "Paths" msgstr "路径" +msgid "Pattern (as regexp):" +msgstr "模式(正则表达式)" + +msgid "Pending subscriptions:" +msgstr "阻塞的订阅：" + #. (para) msgid "Percentages must be used with care. Some implementations may be unable to determine the intrinsic size of an image and will therefore be forced to make compromises. Implementations may choose arbitrary values or may generate errors if the intrinsic size cannot be obtained." msgstr "百分比必须小心的使用。某些实现可能无法确定一幅图像的真实尺寸，因此被迫进行折衷。如果无法获取真实尺寸的话，实现可能选择一个任意值或者可能生成一个错误。" @@ -27904,6 +32560,45 @@ msgstr "必须小心的使用百分比。某些媒体在一个或多个方向上 msgid "Percetages are expressed as a decimal value followed immediately by a % sign." msgstr "百分比表示为一个十进制的值后面紧跟着一个 % 标记。" +msgid "" +"Perform all necessary upgrades.\n" +"\n" +"Usage: %(PROGRAM)s [options]\n" +"\n" +"Options:\n" +" -f/--force\n" +" Force running the upgrade procedures. Normally, if the version number\n" +" of the installed Mailman matches the current version number (or a\n" +" `downgrade' is detected), nothing will be done.\n" +"\n" +" -h/--help\n" +" Print this text and exit.\n" +"\n" +"Use this script to help you update to the latest release of Mailman from\n" +"some previous version. It knows about versions back to 1.0b4 (?).\n" +msgstr "" +"执行所有需要的升级.\n" +"\n" +"用法: %(PROGRAM)s [options]\n" +"\n" +"选项:\n" +" -f/--force\n" +" 强迫运行升级过程. 正常情况下,如果\n" +" 已安装的版本号与正安装的版本号相同 (或者\n" +" 一次`降级'安装被发现), 什么安装也不会执行.\n" +"\n" +" -h/--help\n" +" 显示这段文本并退出.\n" +"\n" +"使用这段脚本从之前的某个版本升级到最新的发行版.\n" +"它可以识别到1.0b4 (?)版本.\n" + +msgid "Permanently ban from this list" +msgstr "永久拒绝这个列表" + +msgid "Permanently remove mailing list %(realname)s" +msgstr "永久删除邮件列表%(realname)s" + #. (para) msgid "Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation. A copy of the license is included in ." msgstr "Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation. A copy of the license is included in ." @@ -27956,10 +32651,23 @@ msgstr "在表格上不放置边框。在某些受限控制在表格边框格式 msgid "Place the indexterm anywhere you like and point to the element that contains the range of text you wish to index with the zone attribute on the indexterm. Note that zone is defined as IDREFS so a single indexterm can point to multiple ranges." msgstr "放置 indexterm 在你愿意的任何地方并指向元素，这个元素包含你希望使用在 indexterm 中的 zone 属性索引的文本范围。注意，zone 被定义为 IDREFS ，所以一个单独的 indexterm 能够指向多个范围。" +msgid "Plain" +msgstr "普通" + #. (para) msgid "Please deliver to:

    The Law Offices of Dewey, Cheatem, and Howe 100 Main StreetThird FloorAnytown, NY12345USA
    " msgstr "Please deliver to:
    The Law Offices of Dewey, Cheatem, and Howe 100 Main StreetThird FloorAnytown, NY12345USA
    " +msgid "" +"Please do *not* post administrative requests to the mailing\n" +"list. If you wish to subscribe, visit %(listurl)s or send a message with the\n" +"word `help' in it to the request address, %(request)s, for further\n" +"instructions." +msgstr "" +"请不要发送管理请求到邮件列表，如果希望订阅，\n" +"请访问 %(listurl)s 或者 以｀help｀为内容发送信息至\n" +"请求地址， %(request)s，以获得进一步的指示信息。" + #. Resource IDs: (83) msgid "Please enter a hook script to execute." msgstr "请输入要执行的 Hook 脚本" @@ -27968,6 +32676,16 @@ msgstr "请输入要执行的 Hook 脚本" msgid "Please enter a path where to apply the hook script to." msgstr "请输入要应用 Hook 脚本的路径。" +msgid "" +"Please enter the confirmation string\n" +" (i.e. cookie) that you received in your email message, in the box\n" +" below. Then hit the Submit button to proceed to the next\n" +" confirmation step." +msgstr "" +"请输入您的验证字符串\n" +" (也就是说在下面的方框中您以邮件信息的方式收到的cookie) \n" +" 然后点击 提交 按钮，以进行下一步的验证." + #. Resource IDs: (251) msgid "Please execute the \"Cleanup\" command." msgstr "请执行“清理”动作。" @@ -27997,10 +32715,16 @@ msgstr "请选择下述选项之一解决冲突：" msgid "Please select a hook type" msgstr "请选择 Hook 类型" +msgid "Please specify either -p or -m." +msgstr "请指定 -p 或者 -m" + #. Resource IDs: (76) msgid "Please specify the certificate type" msgstr "请指定凭证类型" +msgid "Please trim the recipient list; it is too long." +msgstr "请整理收件人列表；该列表太长。" + msgid "Please upgrade the server to 0.19 or later" msgstr "请将服务器升级至0.19或更新的版本" @@ -28052,10 +32776,36 @@ msgstr "指向像链接的文本一样使用的内容的元素。" msgid "Points to the start of the range" msgstr "指向范围的开始" +msgid "Policies concerning immediately delivered list traffic." +msgstr "即时投递传输的策略" + #. (entry) msgid "Polish" msgstr "波兰语" +msgid "" +"Poll the NNTP servers for messages to be gatewayed to mailing lists.\n" +"\n" +"Usage: gate_news [options]\n" +"\n" +"Where options are\n" +"\n" +" --help\n" +" -h\n" +" Print this text and exit.\n" +"\n" +msgstr "" +"向NNTP服务器查询需要转发到邮件列表的消息。\n" +"\n" +"用法： gate_news [options]\n" +"\n" +"这里的选项为\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息然后退出。\n" +"\n" + #. (entry) msgid "Portuguese" msgstr "葡萄牙语" @@ -28064,6 +32814,12 @@ msgstr "葡萄牙语" msgid "Portuguese (Brazil)" msgstr "葡萄牙语(巴西)" +msgid "Post by non-member to a members-only list" +msgstr "由非成员发送到一个仅成员列表(members-only list)" + +msgid "Post to moderated list" +msgstr "发送到受限列表" + #. Resource IDs: (569) msgid "Post-Commit Hook" msgstr "Post-Commit Hook" @@ -28076,6 +32832,78 @@ msgstr "Post-Update Hook" msgid "PostScript fonts. PFA files are common on UNIX systems, PFB files are more common on Windows systems." msgstr "PostScript fonts. PFA files are common on UNIX systems, PFB files are more common on Windows systems." +msgid "Posted message canceled" +msgstr "发送的信件已经取消" + +msgid "Poster" +msgstr "发布者" + +msgid "Posting Held for Approval" +msgstr "待批准邮件" + +msgid "Posting of your message titled \"%(subject)s\"" +msgstr "您以标题 \"%(subject)s\" 发布的信件" + +msgid "Posting to a moderated newsgroup" +msgstr "发送信息至受节制的新闻组" + +msgid "Posting to a restricted list by sender requires approval" +msgstr "需要被审核的用户向一个受限列表发送信息" + +msgid "" +"Postings from any of these non-members will be automatically\n" +" discarded. That is, the message will be thrown away with no\n" +" further processing or notification. The sender will not receive\n" +" a notification or a bounce, however the list moderators can\n" +" optionally receive copies of auto-discarded messages..\n" +"\n" +"

    Add member addresses one per line; start the line with a ^\n" +" character to designate a regular expression match." +msgstr "" +"这些非成员的信件将被自动丢弃。也就是说，这些信件将被直接丢\n" +" 弃，而不会再做进一步的处理，也不会发送任何的通知。发信人将不会收到\n" +" 邮件通知或者退信，但是列表管理员可以选择\n" +" 接收一份\n" +" 被自动丢弃信件的拷贝。\n" +"\n" +"

    每行添加一个地址；行首的字符^说明后面的是正则表达式。" + +msgid "" +"Postings from any of these non-members will be automatically\n" +" rejected. In other words, their messages will be bounced back to\n" +" the sender with a notification of automatic rejection. This\n" +" option is not appropriate for known spam senders; their messages\n" +" should be\n" +" automatically discarded.\n" +"\n" +"

    Add member addresses one per line; start the line with a ^\n" +" character to designate a regular expression match." +msgstr "" +"这些非成员的信件将被自动拒绝。也就是说，他们的信件将被连同一\n" +" 份退信通知一起被退回。这个选项不适用于已知的垃圾邮件发送者；他们\n" +" 发送的信件应该被\n" +" 自动丢弃。\n" +"\n" +"

    每行添加一个地址；行首的字符^说明后面的是正则表达式。" + +msgid "" +"Postings from any of these non-members will be immediately\n" +" and automatically held for moderation by the list moderators.\n" +" The sender will receive a notification message which will allow\n" +" them to cancel their held message. Add member addresses one per\n" +" line; start the line with a ^ character to designate a regular\n" +" expression match." +msgstr "" +"这些非成员的信件将会被立即暂存以待列表管理员审查。发送者将\n" +" 收到邮件通知，以允许他们自己撤销被暂存的信件。每行添加一个地址；\n" +" 行首的字符^说明后面的是正则表达式。" + +msgid "Postings to: %(postaddr)s" +msgstr "投递到： %(postaddr)s" + #. Resource IDs: (569) msgid "Pre-Commit Hook" msgstr "Pre-Commit Hook" @@ -28092,6 +32920,15 @@ msgstr "前言" msgid "Preferred" msgstr "首选" +msgid "Preferred language:" +msgstr "喜欢的语言" + +msgid "Prefix Subject: headers on postings gated to news?" +msgstr "在经网关发送到新闻组的邮件中添加Subject:头部？" + +msgid "Prefix for subject line of list postings." +msgstr "列表邮件的主题前缀。" + msgid "Premature EOF seen from server" msgstr "从服务器发现EOF太早" @@ -28106,6 +32943,9 @@ msgstr "Prentice Hall" msgid "Prentice-Hall PTR" msgstr "Prentice-Hall PTR" +msgid "Preserve" +msgstr "滞留" + #. (para) msgid "Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles." msgstr "保持文档的所有不可变章节不变，不改变它们的标题和内容。章节的编号或等价的东西不被认为是章节标题的一部分。" @@ -28118,6 +32958,12 @@ msgstr "保留文档的所有版权信息。" msgid "Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice." msgstr "保持原文档的许可声明中的全部不可变章节、封面文字和封底文字的声明不变。" +msgid "Preserve message for site administrator" +msgstr "为站点管理员保留信息" + +msgid "Preserve messages for the site administrator" +msgstr "为站点管理员保存信息" + #. (para) msgid "Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the \"History\" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission." msgstr "如果当中有用于公众访问的文档透明拷贝的网址的话，保持网址不变，并同样把它所基于的以前版本的网址给出。这些网址可以放在\"历史\"章节。你可以不给出那些在原文档发行之前已经发行至少四年的版本给出的网址，或者该版本的发行者授权不列出网址。" @@ -28134,6 +32980,148 @@ msgstr "防止大多数连接行交叉版本节点的情况" msgid "Preview patched file" msgstr "预览打过补丁的文件" +msgid "Previous message:" +msgstr "上一条消息" + +msgid "" +"Primary start-up and shutdown script for Mailman's qrunner daemon.\n" +"\n" +"This script starts, stops, and restarts the main Mailman queue runners, making\n" +"sure that the various long-running qrunners are still alive and kicking. It\n" +"does this by forking and exec'ing the qrunners and waiting on their pids.\n" +"When it detects a subprocess has exited, it may restart it.\n" +"\n" +"The qrunners respond to SIGINT, SIGTERM, and SIGHUP. SIGINT and SIGTERM both\n" +"cause the qrunners to exit cleanly, but the master will only restart qrunners\n" +"that have exited due to a SIGINT. SIGHUP causes the master and the qrunners\n" +"to close their log files, and reopen then upon the next printed message.\n" +"\n" +"The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n" +"passes on to the qrunners (note that the master will close and reopen its own\n" +"log files on receipt of a SIGHUP). The master also leaves its own process id\n" +"in the file data/master-qrunner.pid but you normally don't need to use this\n" +"pid directly. The `start', `stop', `restart', and `reopen' commands handle\n" +"everything for you.\n" +"\n" +"Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n" +"\n" +"Options:\n" +"\n" +" -n/--no-restart\n" +" Don't restart the qrunners when they exit because of an error or a\n" +" SIGINT. They are never restarted if they exit in response to a\n" +" SIGTERM. Use this only for debugging. Only useful if the `start'\n" +" command is given.\n" +"\n" +" -u/--run-as-user\n" +" Normally, this script will refuse to run if the user id and group id\n" +" are not set to the `mailman' user and group (as defined when you\n" +" configured Mailman). If run as root, this script will change to this\n" +" user and group before the check is made.\n" +"\n" +" This can be inconvenient for testing and debugging purposes, so the -u\n" +" flag means that the step that sets and checks the uid/gid is skipped,\n" +" and the program is run as the current user and group. This flag is\n" +" not recommended for normal production environments.\n" +"\n" +" Note though, that if you run with -u and are not in the mailman group,\n" +" you may have permission problems, such as begin unable to delete a\n" +" list's archives through the web. Tough luck!\n" +"\n" +" -s/--stale-lock-cleanup\n" +" If mailmanctl finds an existing master lock, it will normally exit\n" +" with an error message. With this option, mailmanctl will perform an\n" +" extra level of checking. If a process matching the host/pid described\n" +" in the lock file is running, mailmanctl will still exit, but if no\n" +" matching process is found, mailmanctl will remove the apparently stale\n" +" lock and make another attempt to claim the master lock.\n" +"\n" +" -q/--quiet\n" +" Don't print status messages. Error messages are still printed to\n" +" standard error.\n" +"\n" +" -h/--help\n" +" Print this message and exit.\n" +"\n" +"Commands:\n" +"\n" +" start - Start the master daemon and all qrunners. Prints a message and\n" +" exits if the master daemon is already running.\n" +"\n" +" stop - Stops the master daemon and all qrunners. After stopping, no\n" +" more messages will be processed.\n" +"\n" +" restart - Restarts the qrunners, but not the master process. Use this\n" +" whenever you upgrade or update Mailman so that the qrunners will\n" +" use the newly installed code.\n" +"\n" +" reopen - This will close all log files, causing them to be re-opened the\n" +" next time a message is written to them\n" +msgstr "" +"关闭、开启Mailman qrunner守护进程的主脚本程序。\n" +"\n" +"此脚本可以开启，关闭，和重启Mailman queue runners，确保各种长期运行的qrunner仍\n" +"在正常运行。此脚本通过fork和exec这些qrunners并且获取他们的pid来做到这些。当它发\n" +"现有子进程退出时，就会重新启动它。\n" +"\n" +"qrunners会对SIGINT， SIGTERM和SIGHUP信号作出响应。SIGINT和SIGTERM信号可以使qrunners\n" +"完全地退出，但是master只会对由SIGINT信号造成的退出进行重启。SIGHUP会导致master\n" +"和qrunners关闭它们的日志文件，直到产生新的输出信息时才重新打开它。\n" +"\n" +"master也会响应SIGINT, SIGTERM和SIGHUP，但只是把它们传递给qurnners(注意，当接收到\n" +"SIGHUP时master会关闭并重新打开它的日志文件)。master也会在data/master-qrunner.pid\n" +"这个文件中记录它自己的进程号，但是一般来说您不需要直接使用它。'start', 'stop',\n" +"'restart'和'reopen'这几个命令为您处理了全部的事情。\n" +"\n" +"用法： %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n" +"\n" +"选项：\n" +"\n" +" -n/--no-restart\n" +" 在qurnners因错误或者SIGINT而退出后不被重启。如果它们是因为SIGTERM而\n" +" 退出的话，将从不会被重启。仅调试时使用此选项。仅在使用'start‘\n" +" 命令时有效。\n" +"\n" +" -u/--run-as-user\n" +" 一般来说，当用户id和组id没有被设置为'mailman'(在您编译配置Mailman时定\n" +" 义)时，此脚本会拒绝执行。如果以root身份运行的话，此脚本将会在检查之前\n" +" 切换到此用户和组。\n" +"\n" +" 这可能会对测试或者调试造成不便，设置-u选项会导致设置和检查\n" +" uid/gid的步骤被忽略，并且程序将会以当前用户和组的身份运行。不推荐在实\n" +" 际环境(normal production environments)中使用此选项。\n" +"\n" +" 但是请注意，如果使用了-u选项，并且不属于mailman组，则可能会遇到权\n" +" 限问题，例如无法从web上删除一个列表的存档。厄运！\n" +"\n" +" -s/--stale-lock-cleanup\n" +" 如果mailmanctl发现一个已存在的master锁文件，它一般会打印一段错误信息，\n" +" 然后退出。指定此选项会使mailmanctl做进一步的检查。如果发现一个正在运行\n" +" 的进程，它的host/pid与锁文件中描述的一致，mailmanctl仍然会退出。但是如\n" +" 果没有找到这样的进程，mailmanctl会删除这个错误的锁文件，然后尝试建立正确\n" +" 的master锁文件。\n" +"\n" +" -q/--quiet\n" +" 不显示状态信息。错误信息仍然会被打印到标准错误。\n" +"\n" +" -h/--help\n" +" 打印此帮助信息然后退出。\n" +"\n" +"命令：\n" +"\n" +" start - 启动master守护进程和所有的qrunners。如果master守护进程已经在运行\n" +" 的话，打印一条信息然后退出。\n" +"\n" +" stop - 停止master守护进程和所有的qrunners。停止后，不会再有信件被处理。\n" +"\n" +" restart - 重启qrunners，但是不重启master进程。当您升级Mailman后使用此\n" +" 命令，这样qrunners将会使用新安装的代码。\n" +"\n" +" reopen - 这将会关闭所有的日志文件，在产生新的日志信息时再重新打开它们。\n" + +msgid "Print the Mailman version.\n" +msgstr "显示Mailman版本.\n" + msgid "" "Print the status of working copy files and directories.\n" "usage: status [PATH...]\n" @@ -28462,12 +33450,27 @@ msgstr "打印索引" msgid "Prior to version 4.0 of DocBook, this element was named comment." msgstr "以前的 DocBook 版本 4.0 ，这个元素被命名为 comment。" +msgid "Privacy options..." +msgstr "隐私选项..." + +msgid "Private Archive Error" +msgstr "内部存档错误" + +msgid "Private Archive Error - %(msg)s" +msgstr "内部存档错误 - %(msg)s" + +msgid "Private archive file not found" +msgstr "没有找到内部存档文件" + msgid "Problem on first log entry in a working copy" msgstr "操作工作副本的第一个日志条目出错" msgid "Problem running log" msgstr "执行日志出错" +msgid "Problems found:" +msgstr "发现问题:" + #. (tag) msgid "Procedure" msgstr "程序" @@ -28480,6 +33483,86 @@ msgstr "进程“%s”失败(返回 %d)" msgid "Process '%s' returned error exitcode %d" msgstr "进程“%s”返回错误退出码 %d" +msgid "" +"Process disabled members, recommended once per day.\n" +"\n" +"This script cruises through every mailing list looking for members whose\n" +"delivery is disabled. If they have been disabled due to bounces, they will\n" +"receive another notification, or they may be removed if they've received the\n" +"maximum number of notifications.\n" +"\n" +"Use the --byadmin, --byuser, and --unknown flags to also send notifications to\n" +"members whose accounts have been disabled for those reasons. Use --all to\n" +"send the notification to all disabled members.\n" +"\n" +"Usage: %(PROGRAM)s [options]\n" +"\n" +"Options:\n" +" -h / --help\n" +" Print this message and exit.\n" +"\n" +" -o / --byadmin\n" +" Also send notifications to any member disabled by the list\n" +" owner/administrator.\n" +"\n" +" -m / --byuser\n" +" Also send notifications to any member disabled by themselves.\n" +"\n" +" -u / --unknown\n" +" Also send notifications to any member disabled for unknown reasons\n" +" (usually a legacy disabled address).\n" +"\n" +" -b / --notbybounce\n" +" Don't send notifications to members disabled because of bounces (the\n" +" default is to notify bounce disabled members).\n" +"\n" +" -a / --all\n" +" Send notifications to all disabled members.\n" +"\n" +" -f / --force\n" +" Send notifications to disabled members even if they're not due a new\n" +" notification yet.\n" +"\n" +" -l listname\n" +" --listname=listname\n" +" Process only the given list, otherwise do all lists.\n" +msgstr "" +"处理被禁止的成员，建议每天一次。\n" +"\n" +"此脚本在所有的邮件列表中查找禁止投递的成员。如果他们是因为退信而被禁止，他们将\n" +"收到另一封通知，或者在他们收到的通知超过了最大数量时将他们从列表中移除。\n" +"\n" +"使用 --byadmin, --byuser, 和 --unknown 选项将会向因相应原因而被禁止的成员发送通\n" +"知。使用 --all 将向所有被禁止的成员发送通知。\n" +"\n" +"用法： %(PROGRAM)s [options]\n" +"\n" +"选项：\n" +" -h / --help\n" +" 打印此帮助信息然后退出。\n" +"\n" +" -o / --byadmin\n" +" 也向被列表主人/管理员禁止的成员发送通知。\n" +"\n" +" -m / --byuser\n" +" 也向自己禁止的成员发送通知。\n" +"\n" +" -u / --unknown\n" +" 也向因未知原因而被禁止的成员发送通知(一般是一个继承的被禁止的地址)。\n" +"\n" +" -b / --notbybounce\n" +" 不向因退信而被禁止的成员发送通知(默认是向他们发送通知)。\n" +"\n" +" -a / --all\n" +" 向所有被禁止的成员发送通知。\n" +"\n" +" -f / --force\n" +" 向被禁止的成员发送通知，即使他们还不应该现在就接到新的通知。\n" +"\n" +" -l listname\n" +" --listname=listname\n" +" 仅处理指定的列表，否则将处理所有的列表。\n" + #. (para) msgid "Processed like an HTML col." msgstr "像一个 HTML 行(col)一样处理。" @@ -28717,6 +33800,9 @@ msgstr "公共标示符，系统标示符，和编目文件" msgid "Public identifiers have two disadvantages:" msgstr "公共标识符有两个不利之处：" +msgid "Public mailing lists at %(hostname)s:" +msgstr "%(hostname)s 上的公共邮件列表：" + #. (title) msgid "Publishing DocBook Documents" msgstr "出版 DocBook 文档" @@ -28733,6 +33819,9 @@ msgstr "" "把文件和目录纳入版本控制，通过调度加到版本库。它们会在下一次提交时加入。\n" "用法: add 路径...\n" +msgid "Python Powered" +msgstr "Python Powered" + msgid "Python exception has been set with the error" msgstr "Python 异常被设为错误" @@ -28741,6 +33830,9 @@ msgstr "Python 异常被设为错误" msgid "Q%d/%.2d" msgstr "Q%d/%.2d" +msgid "Quarterly" +msgstr "每季度" + msgid "" "Query merge-related information.\n" "usage: mergeinfo [TARGET[@REV]...]\n" @@ -28826,6 +33918,30 @@ msgstr "" msgid "RFC" msgstr "RFC" +msgid "" +"RFC 2369 defines a set of List-* headers that are\n" +" normally added to every message sent to the list membership.\n" +" These greatly aid end-users who are using standards compliant\n" +" mail readers. They should normally always be enabled.\n" +"\n" +"

    However, not all mail readers are standards compliant yet,\n" +" and if you have a large number of members who are using\n" +" non-compliant mail readers, they may be annoyed at these\n" +" headers. You should first try to educate your members as to\n" +" why these headers exist, and how to hide them in their mail\n" +" clients. As a last resort you can disable these headers, but\n" +" this is not recommended (and in fact, your ability to disable\n" +" these headers may eventually go away)." +msgstr "" +"RFC 2369 定义了一个 List-*的头部集，这个头部集通常会添加在发给列表成员的每封邮件中\n" +" 这极大的帮助了使用标准(standards compliant)邮件阅读器的终端用户。\n" +" 通常应该使用这些头部。\n" +"\n" +"

    然而，并不是所有的阅读器都是符合标准的，如果你有很多成员使用非标准\n" +" (non-compliant)邮件阅读器，他们会对此头部很生气。你应该首先告诉你的成员\n" +" 这些头部存在的原因，并告诉他们怎样在邮件客户端隐藏头部。实在不行的话可以\n" +" 禁用头部。但并不建议这样做(事实上，你最终会失去禁止头部的能力)。" + #. (surname) msgid "Rahtz" msgstr "Rahtz" @@ -28860,6 +33976,61 @@ msgstr "改名(&N)..." msgid "Re&vert..." msgstr "SVN 还原(&V)..." +msgid "Re-enable mailing list membership" +msgstr "重新设置邮件列表成员有效" + +msgid "Re-enable membership" +msgstr "重新设置成员资格为有效" + +msgid "" +"Re-generate the Pipermail gzip'd archive flat files.\n" +"\n" +"This script should be run nightly from cron. When run from the command line,\n" +"the following usage is understood:\n" +"\n" +"Usage: %(program)s [-v] [-h] [listnames]\n" +"\n" +"Where:\n" +" --verbose\n" +" -v\n" +" print each file as it's being gzip'd\n" +"\n" +" --help\n" +" -h\n" +" print this message and exit\n" +"\n" +" listnames\n" +" Optionally, only compress the .txt files for the named lists. Without \n" +" this, all archivable lists are processed.\n" +"\n" +msgstr "" +"重新生成gzip压缩的Pipermail存档文件。\n" +"\n" +"此脚本应该在每晚由cron运行。从命令行运行时，可以识别下面的用法：\n" +"\n" +"用法： %(program)s [-v] [-h] [listnames]\n" +"\n" +"这里：\n" +" --verbose\n" +" -v\n" +" 打印正在被gzip压缩的文件名。\n" +"\n" +" --help\n" +" -h\n" +" 打印此帮助信息然后退出。\n" +"\n" +" listnames\n" +" 可选，仅压缩指定列表的 .txt 文件。不指定的话所有可存档的列表都将被处理。\n" +"\n" + +msgid "Re-opening all log files" +msgstr "正在打开所有的日志文件" + +msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix" +msgstr "" +"以 %(MAILMAN_USER)s(或root)身份使用-f标记(flag)重新运行此脚本\n" +"来修复发现的问题" + msgid "Read access denied for root of edit" msgstr "编辑根目录时拒绝读取" @@ -28883,10 +34054,102 @@ msgstr "不接受从标准输入设备读取" msgid "Reading one svndiff window read beyond the end of the representation" msgstr "读svndiff窗口时超出了结尾" +msgid "Reason for refusal" +msgstr "拒绝的原因" + +msgid "Reason:" +msgstr "原因:" + +msgid "" +"Rebuild a list's archive.\n" +"\n" +"Use this command to rebuild the archives for a mailing list. You may want to\n" +"do this if you edit some messages in an archive, or remove some messages from\n" +"an archive.\n" +"\n" +"Usage: %(PROGRAM)s [options] []\n" +"\n" +"Where options are:\n" +" -h / --help\n" +" Print this help message and exit.\n" +"\n" +" -q / --quiet\n" +" Make the archiver output less verbose.\n" +"\n" +" --wipe\n" +" First wipe out the original archive before regenerating. You usually\n" +" want to specify this argument unless you're generating the archive in\n" +" chunks.\n" +"\n" +" -s N\n" +" --start=N\n" +" Start indexing at article N, where article 0 is the first in the mbox.\n" +" Defaults to 0.\n" +"\n" +" -e M\n" +" --end=M\n" +" End indexing at article M. This script is not very efficient with\n" +" respect to memory management, and for large archives, it may not be\n" +" possible to index the mbox entirely. For that reason, you can specify\n" +" the start and end article numbers.\n" +"\n" +"Where is the path to a list's complete mbox archive. Usually this will\n" +"be some path in the archives/private directory. For example:\n" +"\n" +"%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n" +"\n" +" is optional. If it is missing, it is calculated.\n" +msgstr "" +"重建列表归档\n" +"\n" +"使用这个命令重新为一个邮件列表创建归档。如果您需要编辑或者\n" +" 删除归档中的信件，可能需要做此操作。\n" +"\n" +"用法: %(PROGRAM)s [options] []\n" +"\n" +"这里选项为\n" +" -h / --help\n" +" 打印此帮助信息然后退出.\n" +"\n" +" -q / --quiet\n" +" 关闭冗余输出.\n" +"\n" +" --wipe\n" +" 在重新生成归档前删除原有归档.一般来说,除非您成块地生成归档,您会指定此\n" +" 选项.\n" +"\n" +" -s N\n" +" --start=N\n" +" 从第N篇文章开始索引,mbox中的文章从0开始计数.默认为0.\n" +"\n" +" -e M\n" +" --end=M\n" +" 到第M篇文章处结束索引.这个脚本在内存管理和处理大的归档方面并不高效,\n" +" 可能无法完全索引mobx中的所有条目.由此,您可以提供开始和结束索引的文\n" +" 章编号.\n" +"\n" +"是列表mbox归档的路径.一般来说是archives/private目录下的某个路径.例如:\n" +"\n" +"%% bin/arch mylist archinves/private/mylist.mbox/mylist.mbox\n" +"\n" +"是可选的.如果没有提供,它将被计算出来.\n" + +msgid "Receive digests?" +msgstr "接收文摘吗?" + +msgid "Received:" +msgstr "接收:" + #. Resource IDs: (65535) msgid "Recently modified lines" msgstr "最近修改的行" +msgid "Recipient filters" +msgstr "收信人过滤器" + +msgid "Recipient filters" +msgstr "接收端过滤器" + #. (para) msgid "Recommended best practice is to select a value from a controlled vocabulary (for example, the Thesaurus of Geographic Names [TGN]) and that, where appropriate, named places or time periods be used in preference to numeric identifiers such as sets of coordinates or date ranges." msgstr "推荐的最佳做法是从一个受控的词汇表中选择一个值 (例如， 地理名称辞典 [TGN]) ，以及，优先于数字标识使用的合适的地方，命名的地点或时期，如坐标集或日期范围。" @@ -28942,6 +34205,53 @@ msgstr "" msgid "Reduce cross-&lines" msgstr "减少交叉行(&L)" +msgid "" +"Reduce disk space usage for Pipermail archives.\n" +"\n" +"Usage: %(PROGRAM)s [options] file ...\n" +"\n" +"Where options are:\n" +" -h / --help\n" +" Print this help message and exit.\n" +"\n" +"Only use this to 'fix' archive -article database files that have been written\n" +"with Mailman 2.1.3 or earlier and have html_body attributes in them. These\n" +"attributes can cause huge amounts of memory bloat and impact performance for\n" +"high activity lists, particularly those where large text postings are made to\n" +"them.\n" +"\n" +"Example:\n" +"\n" +"%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n" +"\n" +"You should run `bin/check_perms -f' after running this script.\n" +"\n" +"You will probably want to delete the -article.bak files created by this script\n" +"when you are satisfied with the results.\n" +"\n" +"This script is provided for convenience purposes only. It isn't supported.\n" +msgstr "" +"降低磁盘空间。\n" +"\n" +"用法: %(PROGRAM)s [options] file ...\n" +"\n" +"选项是:\n" +" -h / --help\n" +" 输出此帮助信息然后退出。\n" +"\n" +"此命令仅用来整理用Mailman 2.1.3O或更早的版本生成的数据库归档文件，这些文件都是html格式的。\n" +"而html格式会造成大量的内存浪费并严重影响高速列表的性能，特别是会产生大量文本纪录的列表。\n" +"\n" +"例子:\n" +"\n" +"%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n" +"\n" +"在运行此脚本后，您应该运行‘bin/check_perms -f’。\n" +"\n" +"当您对结果满意后，您可能会想要删除由此脚本产生的-article.bak文件。\n" +"\n" +"此脚本仅是用来提升性能的。并不是必需使用的。\n" + #. Resource IDs: (3825) msgid "Reduce the window to an icon" msgstr "缩小窗口为图标" @@ -28978,6 +34288,41 @@ msgstr "WEB 上的参考资料和技术注释" msgid "Refresh" msgstr "重新整理" +msgid "" +"Regenerate Mailman specific aliases from scratch.\n" +"\n" +"The actual output depends on the value of the `MTA' variable in your mm_cfg.py\n" +"file.\n" +"\n" +"Usage: genaliases [options]\n" +"Options:\n" +"\n" +" -q/--quiet\n" +" Some MTA output can include more verbose help text. Use this to tone\n" +" down the verbosity.\n" +"\n" +" -h/--help\n" +" Print this message and exit.\n" +msgstr "" +"从头开始重新生成Mailman specific aliases。\n" +"\n" +"实际的输出依赖于mm_cfg.py文件中'MTA'的值。\n" +"\n" +"用法： genaliases [options]\n" +"选项：\n" +"\n" +" -q/--quiet\n" +" 一些MTA的输出会包括更多冗余的帮助信息。使用此选项来关闭冗于。\n" +"\n" +" -h/--help\n" +" 打印此帮助信息并退出。\n" + +msgid "Regexp:" +msgstr "正则表达式" + +msgid "Regular" +msgstr "一般" + #. Resource IDs: (117) #, c-format msgid "" @@ -29017,6 +34362,9 @@ msgstr "" msgid "Reject" msgstr "拒绝" +msgid "Rejects" +msgstr "拒绝" + #. (para) msgid "Related messages are usually messages that appear elsewhere in response to the same event (or set of events) that triggered the main message. For example, if a network client produces a failure or warning message, a related message might appear on the server console." msgstr "相关消息通常是出现在触发主消息的同样的事件的回复中的其它地方。例如，如果一个网络客户端产生了一个错误或警告消息，一条相关消息将出现在服务器控制台上。" @@ -29068,6 +34416,9 @@ msgstr "重新定位只能改变URL中的版本库部分" msgid "Relocating..." msgstr "正在重新定位..." +msgid "Remind" +msgstr "提示" + #. Resource IDs: (207) msgid "Remote property status" msgstr "远程属性状态：" @@ -29193,6 +34544,30 @@ msgstr "从忽略列表删除(&I)" msgid "Remove from changelist" msgstr "从修改列表删除" +msgid "" +"Remove message attachments that don't have a matching\n" +" content type. Leave this field blank to skip this filter\n" +" test." +msgstr "" +"移除内容类型不匹配的附件.\n" +" 若想跳过过滤器测试则请将此项留空." + +msgid "" +"Remove message attachments that don't have a matching\n" +" filename extension. Leave this field blank to skip this filter\n" +" test." +msgstr "移除没有匹配的扩展名的消息附件. 如果您想跳过过滤器，请留空此项." + +msgid "" +"Remove message attachments that have a matching content\n" +" type." +msgstr "移除类型匹配的附件." + +msgid "" +"Remove message attachments that have a matching filename\n" +" extension." +msgstr "移除有匹配的扩展名的附件." + #. Resource IDs: (127) #, c-format msgid "" @@ -29205,6 +34580,43 @@ msgstr "" msgid "Remove revisions emptied by filtering." msgstr "删除因过滤而产生的空版本。" +msgid "" +"Remove the components of a mailing list with impunity - beware!\n" +"\n" +"This removes (almost) all traces of a mailing list. By default, the lists\n" +"archives are not removed, which is very handy for retiring old lists.\n" +"\n" +"Usage:\n" +" rmlist [-a] [-h] listname\n" +"\n" +"Where:\n" +" --archives\n" +" -a\n" +" Remove the list's archives too, or if the list has already been\n" +" deleted, remove any residual archives.\n" +"\n" +" --help\n" +" -h\n" +" Print this help message and exit.\n" +"\n" +msgstr "" +"安全的删除邮件列表的所有组件!\n" +"\n" +"能删除邮件列表的（几乎）所有的痕迹。默认情况下，对不用的旧列表很有用的列表存档不会被删除。\n" +"\n" +"用法:\n" +" rmlist [-a] [-h] listname\n" +"\n" +"其中:\n" +" --archives\n" +" -a\n" +" 将列表存档也删除，如果列表已经被删除，则删除所有残留的存档。\n" +"\n" +" --help\n" +" -h\n" +" 输出该帮助信息然后退出。\n" +"\n" + #. Resource IDs: (1332) msgid "Remove..." msgstr "移除..." @@ -29236,6 +34648,9 @@ msgstr "" "%s \n" "从忽略列表删除。" +msgid "Removed: %(s)s" +msgstr "移除 : %(s)s" + #. Resource IDs: (17) msgid "Removes all unversioned and ignored items" msgstr "删除所有无版本控制或忽略的项目" @@ -29248,6 +34663,9 @@ msgstr "将选定的文件或文件匹配列表从忽略列表删除" msgid "Removes the selected properties" msgstr "删除选择的属性" +msgid "Removing %(msg)s" +msgstr "正在删除 %(msg)s" + #, c-format msgid "Removing '%s' from changelist '%s'." msgstr "删除 “%s”，从修改列表 “%s”。" @@ -29527,10 +34945,19 @@ msgstr "不支持请求的深度 “exclude”" msgid "Request for Comments" msgstr "请求评论" +msgid "Request to mailing list %(realname)s rejected" +msgstr "对于 %(realname)s 邮件列表的请求被拒绝" + +msgid "Requested topic is not valid: %(topicname)s" +msgstr "请求的主题不存在: %(topicname)s" + #. Resource IDs: (65535) msgid "Requests a username and a password" msgstr "需要用户名和密码" +msgid "Require approval" +msgstr "要求核准" + #. (para) msgid "Required attributes are shown in bold." msgstr "要求元素显示为 bold(加粗)。" @@ -29542,10 +34969,82 @@ msgstr "已解决的(&O)..." msgid "Reserved directory name in command line arguments" msgstr "在命令行参数中包含保留的目录名称" +msgid "" +"Reset a list's web_page_url attribute to the default setting.\n" +"\n" +"This script is intended to be run as a bin/withlist script, i.e.\n" +"\n" +"% bin/withlist -l -r fix_url listname [options]\n" +"\n" +"Options:\n" +" -u urlhost\n" +" --urlhost=urlhost\n" +" Look up urlhost in the virtual host table and set the web_page_url and\n" +" host_name attributes of the list to the values found. This\n" +" essentially moves the list from one virtual domain to another.\n" +"\n" +" Without this option, the default web_page_url and host_name values are\n" +" used.\n" +"\n" +" -v / --verbose\n" +" Print what the script is doing.\n" +"\n" +"If run standalone, it prints this help text and exits.\n" +msgstr "" +"把列表的web_page_url属性恢复为默认设置。\n" +"\n" +"此脚本应该被作为一个bin/withlist脚本来运行，也就是\n" +"\n" +"% bin/withlist -l -r fix_url listname [options]\n" +"\n" +"选项：\n" +" -u urlhost\n" +" --urlhost=urlhost\n" +" 在虚拟主机列表中搜索urlhost，并把web_page_url和host_name属性设置为找到的值。\n" +" 在本质上，这把一个列表从一个虚拟域移到了另一个。\n" +"\n" +" 不指定此选项，将使用web_page_url和host_name的默认值。\n" +"\n" +" -v / --verbose\n" +" 打印脚本正在做什么。\n" +"\n" +"如果独立运行的话，将打印此帮助信息并退出。\n" + #. (para) msgid "Reset the form" msgstr "重置表单" +msgid "" +"Reset the passwords for members of a mailing list.\n" +"\n" +"This script resets all the passwords of a mailing list's members. It can also\n" +"be used to reset the lists of all members of all mailing lists, but it is your\n" +"responsibility to let the users know that their passwords have been changed.\n" +"\n" +"This script is intended to be run as a bin/withlist script, i.e.\n" +"\n" +"% bin/withlist -l -r reset_pw listname [options]\n" +"\n" +"Options:\n" +" -v / --verbose\n" +" Print what the script is doing.\n" +msgstr "" +"为邮件列表成员重设密码。\n" +"\n" +"此脚本为一个邮件列表的所有成员重设密码。它也能为所有邮件列表的所有成员重设密码，\n" +"但是您有必要让所有得用户知道他们的密码被改变了。\n" +"\n" +"该脚本必须作为bin/withlist脚本来运行，即\n" +"\n" +"% bin/withlist -l -r reset_pw listname [options]\n" +"\n" +"选项:\n" +" -v / --verbose\n" +" 输出脚本正在干什么\n" + +msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info" +msgstr "重设 %(n)s BYBOUNCEs 使没有退订信息的地址失效" + #. Resource IDs: (207, 229) msgid "Resolve" msgstr "解决" @@ -29607,6 +35106,9 @@ msgstr "资源" msgid "Resources for Resources" msgstr "资源的资源" +msgid "Restarting Mailman's master qrunner" +msgstr "正在重启Mailman的主队列管理器" + #. Resource IDs: (1254) msgid "Restore Default" msgstr "恢复默认值" @@ -29644,6 +35146,12 @@ msgstr "“%s” 不支持取回合并信息" msgid "Retry" msgstr "重试" +msgid "Return the generated output." +msgstr "返回产生的输出。" + +msgid "Return to the " +msgstr "返回到" + #. (tag) msgid "ReturnValue" msgstr "ReturnValue" @@ -29890,6 +35398,12 @@ msgstr "边线仅出现在行组(参考 thead、tfoot 和 tbody)和列组(参考 msgid "Rules will appear between rows only." msgstr "边线仅出现在行之间。" +msgid "Run this program as root or as the %(name)s user, or use -u." +msgstr "用root用户，或 %(name)s用户身份来运行此程序，或者使用-u。" + +msgid "Running %(module)s.%(callable)s()..." +msgstr "运行 %(module)s.%(callable)s()..." + #. (entry) msgid "Russian" msgstr "俄语" @@ -30018,6 +35532,9 @@ msgstr "Sample HTML Table" msgid "Sample Table" msgstr "表格样例" +msgid "Sat" +msgstr "星期六" + #. Resource IDs: (57604) msgid "Save &As..." msgstr "另存为(&A)..." @@ -30076,6 +35593,9 @@ msgstr "保存文件 %s" msgid "Saving files" msgstr "保存文件 %s" +msgid "Saving list" +msgstr "保存列表" + #. Resource IDs: (144) msgid "Saving patchfile to:" msgstr "保存补丁文件至：" @@ -30132,6 +35652,9 @@ msgstr "当一个控件接收焦点时触发脚本" msgid "Script to evaluate when a user selects some text" msgstr "当用户选择一些文本时触发" +msgid "Scrub attachments of regular delivery message?" +msgstr "去除常规投递邮件的附件？" + #. Resource IDs: (113) msgid "Search &log messages..." msgstr "查找日志信息(&L)..." @@ -30140,10 +35663,16 @@ msgstr "查找日志信息(&L)..." msgid "Search for:" msgstr "查找内容：" +msgid "Search regular expression required" +msgstr "需指定搜索正则表达式" + #. Resource IDs: (7) msgid "Search string not found!" msgstr "没有找到要查找的字符串！" +msgid "Search..." +msgstr "搜索..." + #. (firstname) msgid "Sebastian" msgstr "Sebastian" @@ -30152,6 +35681,9 @@ msgstr "Sebastian" msgid "Sebastopol" msgstr "塞瓦斯托波尔" +msgid "Second" +msgstr "第二" + msgid "Second revision required" msgstr "需要第二个版本" @@ -30300,6 +35832,9 @@ msgstr "选择合并工具" msgid "Select merge target" msgstr "选择合并目标" +msgid "Select page to edit:" +msgstr "选择您要编辑的页面:" + #. Resource IDs: (276) msgid "Select revision range" msgstr "选择版本范围" @@ -30352,6 +35887,9 @@ msgstr "选择数据" msgid "Selecting elements" msgstr "选择元素" +msgid "Send \"list created\" email to list owner?" +msgstr "向列表拥有者发送\"列表已创建\"的信件吗?" + #. Resource IDs: (3866) msgid "Send Mail failed to send message." msgstr "发送邮件功能无法发送信息。" @@ -30389,6 +35927,85 @@ msgstr "" " 选项，编辑器会被启动。如果有目标是锁定的或者包含锁定条目，则在成功\n" " 提交后会被解锁。\n" +msgid "Send goodbye message to members when they are unsubscribed?" +msgstr "当成员退订时，是否发送再见消息？" + +msgid "Send mail to poster when their posting is held for approval?" +msgstr "当邮件被延缓等待批准时给发件人发邮件吗？" + +msgid "Send monthly password reminders?" +msgstr "是否每月发送密码提示？" + +msgid "Send notifications of new subscriptions to the list owner?" +msgstr "向列表管理员发送出现新订阅的通知?" + +msgid "Send notifications to the list owner?" +msgstr "向列表拥有者发送通知" + +msgid "" +"Send password reminders for all lists to all users.\n" +"\n" +"This program scans all mailing lists and collects users and their passwords,\n" +"grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true. Then\n" +"one email message is sent to each unique user (per-virtual host) containing\n" +"the list passwords and options url for the user. The password reminder comes\n" +"from the mm_cfg.MAILMAN_SITE_LIST, which must exist.\n" +"\n" +"Usage: %(PROGRAM)s [options]\n" +"\n" +"Options:\n" +" -l listname\n" +" --listname=listname\n" +" Send password reminders for the named list only. If omitted,\n" +" reminders are sent for all lists. Multiple -l/--listname options are\n" +" allowed.\n" +"\n" +" -h/--help\n" +" Print this message and exit.\n" +msgstr "" +"向所有列表中的所有成员发送口令提示函。\n" +"\n" +"此程序扫描所有的邮件列表，搜集用户和他们的口令，如果mm_cfg.VIRTUAL_HOST_OVERVIEW\n" +"为真的话还将他们按照列表的host_name进行分组。然后给每一个唯一的用户(每一个虚拟主机)\n" +"发送一封电子邮件，包含列表的口令以及可选的url。口令提示函从mm_cfg.MAILMAN_SITE_LIST\n" +"发出，mm_cfg.MAILMAN_SITE_LIST一定要存在。\n" +"\n" +"用法： %(PROGRAM)s [options]\n" +"\n" +"选项：\n" +" -l listname\n" +" --listname=listname\n" +" 仅为指定的列表发送口令提示函。如果省略的话，将会给所有的列表发送。可以使用\n" +" 多个 -l/--listname 选项。\n" +"\n" +" -h/--help\n" +" 打印此帮助信息然后退出。\n" + +msgid "" +"Send password reminders to, eg, \"-owner\" address instead of\n" +" directly to user." +msgstr "" +"将密码提示发送给，例如，\"-owner\"地址，而不是\n" +" 直接发送给用户。" + +msgid "Send unsubscription acknowledgement to the user?" +msgstr "向用户发送取消订阅的确认" + +msgid "Send welcome message to newly subscribed members?" +msgstr "是否向新订阅者发送欢迎消息？" + +msgid "Send welcome messages to new subscribees?" +msgstr "向新的订阅者发送欢迎信件么?" + +msgid "Sender discarded message via web." +msgstr "寄件人通过web删除了信件" + +msgid "Sender is explicitly forbidden" +msgstr "发送人被明确禁止" + +msgid "Sender filters" +msgstr "发送端过滤器" + #, c-format msgid "Sending %s\n" msgstr "正在发送 %s\n" @@ -30397,6 +36014,12 @@ msgstr "正在发送 %s\n" msgid "Sending content" msgstr "正在发送内容" +msgid "Sep" +msgstr "九月" + +msgid "September" +msgstr "九月" + #. (term), (para) msgid "Sequence of:" msgstr "顺序：" @@ -30405,10 +36028,16 @@ msgstr "顺序：" msgid "Sequential clicks or presses." msgstr "连续的单击或按下。" +msgid "Serbian" +msgstr "塞尔维亚语" + #. Resource IDs: (1409) msgid "Server &address:" msgstr "服务器地址(&A)：" +msgid "Server Local Time" +msgstr "服务器本地时间" + msgid "Server can only replay from the root of a repository" msgstr "服务器只能从版本库的根重放" @@ -30468,6 +36097,9 @@ msgstr "服务器发送了意外的返回值(%d %s)，在响应 “%s” 的请 msgid "Session is rooted at '%s' but the repos root is '%s'" msgstr "会话根是“%s”，但是版本库根是“%s”" +msgid "Set" +msgstr "设置" + #. Resource IDs: (1088) msgid "Set file dates to the \"last commit &time\"" msgstr "将文件日期设置为“最后提交时间”(&T)" @@ -30490,6 +36122,45 @@ msgstr "" "%s" msgid "" +"Set the site password, prompting from the terminal.\n" +"\n" +"The site password can be used in most if not all places that the list\n" +"administrator's password can be used, which in turn can be used in most places\n" +"that a list users password can be used.\n" +"\n" +"Usage: %(PROGRAM)s [options] [password]\n" +"\n" +"Options:\n" +"\n" +" -c/--listcreator\n" +" Set the list creator password instead of the site password. The list\n" +" creator is authorized to create and remove lists, but does not have\n" +" the total power of the site administrator.\n" +"\n" +" -h/--help\n" +" Print this help message and exit.\n" +"\n" +"If password is not given on the command line, it will be prompted for.\n" +msgstr "" +"从终端提示来设置口令。\n" +"\n" +"在管理员口令有效的大部分地方（但不是全部），站点口令都有效。在用户口令有效的大部分地方，\n" +"站点口令也有效。\n" +"\n" +"用法: %(PROGRAM)s [options] [password]\n" +"\n" +"选项:\n" +"\n" +" -c/--列表创建者（listcreator）\n" +" 设置列表创建者的口令，而不是站点口令。列表创建者有权创建和删除列表，但是\n" +" 没有站点管理员的全部权限。\n" +"\n" +" -h/--帮助\n" +" 显示此帮助信息并退出\n" +"\n" +"如果没有在命令行中输入口令，则会提醒您。\n" + +msgid "" "Set the value of a property on files, dirs, or revisions.\n" "usage: 1. propset PROPNAME PROPVAL PATH...\n" " 2. propset PROPNAME --revprop -r REV PROPVAL [TARGET]\n" @@ -30687,6 +36358,9 @@ msgstr "集合" msgid "Setting Up the Catalog" msgstr "配置编目" +msgid "Setting host_name to: %(mailhost)s" +msgstr "设置host_name为： %(mailhost)s" + #. Resource IDs: (13) msgid "Setting properties..." msgstr "正在设置属性..." @@ -30711,6 +36385,28 @@ msgstr "不支持递归设置非本地目标 “%s” 的属性" msgid "Setting stylesheet variables" msgstr "设置样式表变量" +msgid "" +"Setting this option causes member email addresses to be\n" +" transformed when they are presented on list web pages (both in\n" +" text and as links), so they're not trivially recognizable as\n" +" email addresses. The intention is to prevent the addresses\n" +" from being snarfed up by automated web scanners for use by\n" +" spammers." +msgstr "" +"设置此项将导致在网页中显示经过变形后的成员邮件地址(文本\n" +" 和链接都经过变形)，变形后的邮件地址将不再是标准格式。这样作的目\n" +" 的是为了防止一些垃圾邮件制造者利用网络爬虫自动收集这些邮件地址。" + +msgid "" +"Setting this option instructs Mailman to start a new volume\n" +" with the next digest sent out." +msgstr "" +"设置这个选项用于指示Mailman在下一册发\n" +" 送出去时开始新一册摘要。" + +msgid "Setting web_page_url to: %(web_page_url)s" +msgstr "设置web_page_url为： %(web_page_url)s" + #. Resource IDs: (107) msgid "Settings" msgstr "设置" @@ -30747,10 +36443,148 @@ msgstr "Subversion 项目的短 URL" msgid "Shortcut" msgstr "Shortcut" +msgid "" +"Should Mailman convert text/html parts to plain\n" +" text? This conversion happens after MIME attachments have been\n" +" stripped." +msgstr "" +"Mailman是否将text/html部分转化成纯文本?\n" +" 此种转换在MIME附件被剥离时发生." + +msgid "" +"Should Mailman filter the content of list traffic according\n" +" to the settings below?" +msgstr "Mainman是否安下列设置过滤列表中的消息内容?" + +msgid "" +"Should Mailman notify you, the list owner, when bounces\n" +" cause a member to be unsubscribed?" +msgstr "当用户由于退信而被退订时, Mailman是否通知您(列表所有者)?" + +msgid "" +"Should Mailman notify you, the list owner, when bounces\n" +" cause a member's subscription to be disabled?" +msgstr "当用户的订阅由于退信而被禁止, Mailman是否通知你?" + +msgid "Should Mailman perform automatic bounce processing?" +msgstr "Mailman是否执行自动退信处理?" + +msgid "" +"Should Mailman personalize each non-digest delivery?\n" +" This is often useful for announce-only lists, but read the details\n" +" section for a discussion of important performance\n" +" issues." +msgstr "" +"Mailman是否为每一个非摘要投递进行个性化设置？这对仅作发布通知用途的列表很有\n" +" 用，但应该读取详细\n" +" 信息部分讨论列表系统性能的重要性。" + +msgid "" +"Should Mailman send an auto-response to emails sent to the\n" +" -owner address?" +msgstr "Mailman是否就发向列表所有者地址的邮件发送自动回复?" + +msgid "" +"Should Mailman send an auto-response to emails sent to the\n" +" -request address? If you choose yes, decide whether you want\n" +" Mailman to discard the original email, or forward it on to the\n" +" system as a normal mail command." +msgstr "" +"Mailman是否就发向请求地址的邮件发送自动回复?\n" +" 如果您选择发送,请决定Mailman放弃原始邮件,还是继续把该邮件当做\n" +" 正常的邮件发送到系统中." + +msgid "" +"Should Mailman send an auto-response to mailing list\n" +" posters?" +msgstr "Mailman是否向邮件列表的发言者发送自动回复?" + +msgid "" +"Should Mailman send the next digest right now, if it is not\n" +" empty?" +msgstr "" +"如果摘要不为空，Mailman应该现在就发送下一册摘要吗\n" +" ？" + +msgid "" +"Should Mailman send you, the list owner, any bounce messages\n" +" that failed to be detected by the bounce processor? Yes\n" +" is recommended." +msgstr "" +"Mainman是否向您(列表所有者)发送退信处理器检测失败的退信消息?\n" +" 建议选择是。" + +msgid "Should Mailman start a new digest volume?" +msgstr "Mailman应该开始新一册摘要吗？" + #. (title) msgid "Should You Do This?" msgstr "你应该这样做吗？" +msgid "Should a digest be dispatched daily when the size threshold isn't reached?" +msgstr "当没有达到摘要大小的上限时，摘要需要每天投递吗？" + +msgid "" +"Should administrator get notices of subscribes and\n" +" unsubscribes?" +msgstr "管理员是否应该得到订阅和取消订阅的通知？" + +msgid "" +"Should any existing Reply-To: header found in the\n" +" original message be stripped? If so, this will be done\n" +" regardless of whether an explict Reply-To: header is\n" +" added by Mailman or not." +msgstr "" +"所有在原消息中找到的Reply-To:头部都应该被删除吗？\n" +" 如果是，不管是否是Mailman显式添加的\n" +" Reply-To:头部都将被删除。" + +msgid "" +"Should messages from non-members, which are automatically\n" +" discarded, be forwarded to the list moderator?" +msgstr "被自动丢弃的非成员信件是否应该被转发给列表管理员？" + +msgid "" +"Should messages from this mailing list include the\n" +" RFC 2369\n" +" (i.e. List-*) headers? Yes is highly\n" +" recommended." +msgstr "" +"来自这个邮件列表的邮件是否要包括\n" +" RFC 2369\n" +"\t\t\t\t(也就是，List-*) 的头部？强烈推荐包括 \t" + +msgid "" +"Should new members be quarantined before they\n" +" are allowed to post unmoderated to this list? Answer Yes to hold\n" +" new member postings for moderator approval by default." +msgstr "" +"新加入的成员在允许向这个列表发送没有经过缓冲的信息前需要被隔离吗?\n" +" 回答 是 会将\n" +" 新成员发送的信息滞留起来,等待主持者的批准(默认)." + +msgid "" +"Should new posts to the mailing list be sent to the\n" +" newsgroup?" +msgstr "要把投递到列表的新邮件发送给新闻组吗？" + +msgid "" +"Should new posts to the newsgroup be sent to the mailing\n" +" list?" +msgstr "要把投递到新闻组的新邮件发送给列表吗？" + +msgid "Should postings include the List-Post: header?" +msgstr "邮件是否应该包括List-Post:的头部？" + +msgid "" +"Should the list moderators get immediate notice of new\n" +" requests, as well as daily notices about collected ones?" +msgstr "列表管理员是否应该得到新请求的即时通知，像得到关于收集到的请求的每日通知一样？" + +msgid "Should the topic filter be enabled or disabled?" +msgstr "启用主题过滤器吗？" + #. Resource IDs: (1382) msgid "Show" msgstr "显示" @@ -30839,6 +36673,11 @@ msgstr "显示行差异工具栏(&N)" msgid "Show linenumber&s" msgstr "显示行号(&S)" +msgid "" +"Show member addresses so they're not directly recognizable\n" +" as email addresses?" +msgstr "不以标准格式显示成员的邮件地址？" + #. Resource IDs: (2051) msgid "Show oldest node at top" msgstr "在顶部显示最老的节点" @@ -30884,6 +36723,33 @@ msgid "Show tags on the copy source, not as separate nodes" msgstr "在复制源显示标签，而不是单独节点" msgid "" +"Show the contents of one or more Mailman queue files.\n" +"\n" +"Usage: show_qfiles [options] qfile ...\n" +"\n" +"Options:\n" +"\n" +" -q / --quiet\n" +" Don't print `helpful' message delimiters.\n" +"\n" +" -h / --help\n" +" Print this text and exit.\n" +"\n" +"Example: show_qfiles qfiles/shunt/*.pck\n" +msgstr "" +"显示一个或多个Mailman队列文件的内容.\n" +"\n" +"用法: show_qfiles [options] qfile ...\n" +"\n" +" -q / --quiet\n" +" 不打印`有用的'消息分界符.\n" +"\n" +" -h / --help\n" +" 打印这份文本并退出.\n" +"\n" +"示例: show_qfiles qfiles/shunt/*.pck\n" + +msgid "" "Show the log messages for a set of revision(s) and/or file(s).\n" "usage: 1. log [PATH]\n" " 2. log URL[@REV] [PATH...]\n" @@ -30991,6 +36857,9 @@ msgstr "显示选定的文件/文件夹的日志" msgid "Shows the mime type of the versioned file" msgstr "显示在版本控制下文件的 mime 类型" +msgid "Shutting down Mailman's master qrunner" +msgstr "正在关闭Mailman的主队列管理器" + #. (tag) msgid "Sidebar" msgstr "Sidebar" @@ -31023,6 +36892,9 @@ msgstr "同时单击或按下。" msgid "Single/&double-pane view" msgstr "单/双(&D)窗格视图" +msgid "Site list is missing: %(sitelistname)s" +msgstr "缺少站点列表: %(sitelistname)s" + #. Resource IDs: (74) msgid "Size" msgstr "大小" @@ -31042,6 +36914,9 @@ msgstr "没有压缩时缓存的大小" msgid "Size of uncompressed data does not match stored original length" msgstr "解压后的数据长度与原始长度不相等" +msgid "Size:" +msgstr "大小:" + msgid "Skip missing merge sources." msgstr "跳过缺少的合并源" @@ -31053,6 +36928,9 @@ msgstr "跳过" msgid "Skipped '%s'\n" msgstr "跳过“%s”\n" +msgid "Skipped content of type %(partctype)s\n" +msgstr "跳过的 %(partctype)s 类型的内容\n" + #. Resource IDs: (263) msgid "Skipped missing target" msgstr "跳过丢失的目标项" @@ -31101,6 +36979,13 @@ msgstr "Some sort of Windows 3.1 hack for some 386 proces msgid "Some systems may display only those entries within a bibliography that are cited in the containing document. This may be an interchange issue. See ." msgstr "某些系统可能只显示那些在 bibliography 中，并且仅在包含文档中被引用的条目。这可能是一个交换问题。参见 。" +msgid "" +"Some unknown error occurred while creating the list.\n" +" Please contact the site administrator for assistance." +msgstr "" +"在创建列表的时候发生了未知的错误.\n" +" 请联系站点管理员以获得帮助." + msgid "Something is wrong with the log message's contents" msgstr "日志信息内容不妥" @@ -31144,6 +37029,15 @@ msgstr "来源与目标似乎不在同一版本库 (来源: “%s”；目的: msgid "Source url '%s' is from different repository" msgstr "源 URL “%s” 来自其它版本库" +msgid "Spam Filter Regexp:" +msgstr "垃圾邮件过滤正则表达式" + +msgid "Spam Filter Rule %(i)d" +msgstr "垃圾邮件过滤规则 %(i)d" + +msgid "Spam filters" +msgstr "垃圾邮件过滤器" + #. (entry) msgid "Span Both" msgstr "Span Both" @@ -31152,6 +37046,9 @@ msgstr "Span Both" msgid "Spanish" msgstr " 西班牙语" +msgid "Spanish (Spain)" +msgstr "西班牙语(西班牙)" + #. (title) msgid "Special characters" msgstr "特别字符" @@ -31633,6 +37530,9 @@ msgstr "叠加柱状图" msgid "Stacked Line Graph" msgstr "叠加折线图" +msgid "Stale pid file removed." +msgstr "过期的进程号文件已删除。" + msgid "Standard properties can't be set explicitly as revision properties" msgstr "标准属性不能设置为版本属性" @@ -31655,6 +37555,9 @@ msgstr "起始版本 %ld 大于结束版本 %ld" msgid "Start revision must precede end revision" msgstr "起始版本必须小于结束版本" +msgid "Starting Mailman's master qrunner." +msgstr "正在启动Mailman的主队列管理器" + #. (para) msgid "Starting in DocBook 4.2, personal names, like AlbertEinstein can be marked-up inline." msgstr "Starting in DocBook 4.2, personal names, like AlbertEinstein can be marked-up inline." @@ -31679,6 +37582,23 @@ msgstr "State Capitals" msgid "State on the Title page the name of the publisher of the Modified Version, as the publisher." msgstr "与原来的发行者一样，在扉页上列出修改版的发行者的名字。" +msgid "" +"States table for the finite-states-machine parser:\n" +" 0 idle\n" +" 1 filename-or-comment\n" +" 2 msgid\n" +" 3 msgstr\n" +" 4 end\n" +" " +msgstr "" +"有限状态机解析器的状态表:\n" +" 0 空闲\n" +" 1 文件名或注释\n" +" 2 消息标识\n" +" 3 消息串\n" +" 4 结束\n" +" " + #. Resource IDs: (179, 245) msgid "Statistics" msgstr "统计" @@ -31829,14 +37749,65 @@ msgstr "主题条目不能包含任何标记。它们是来自一个受控词汇 msgid "Subject terms should be drawn from a controlled vocabulary, such as the Library of Congress Subject Headings. If an outside vocabulary is not appropriate, a local or institutional subject set should be created." msgstr "主题条目将选自可控的词汇表，如 Library of Congress Subject Headings 。如果一个外部词汇表并不适应，一个局部的或组织的主题集将被建立。" +msgid "Subject:" +msgstr "主题:" + +msgid "Submit" +msgstr "提交" + +msgid "Submit All Data" +msgstr "提交所有的数据" + +msgid "Submit Changes" +msgstr "提交更改" + +msgid "Submit My Changes" +msgstr "提交我的修改" + +msgid "Submit Your Changes" +msgstr "提交您的修改" + #. (para) msgid "Submit the form" msgstr "提交表单" +msgid "Subscribe" +msgstr "订阅" + +msgid "Subscribe results page" +msgstr "订阅结果页面" + +msgid "Subscribe these users now or invite them?" +msgstr "替这些用户订阅或者邀请他们" + +msgid "Subscribe to list %(listname)s" +msgstr "订阅邮件列表 %(listname)s" + +msgid "Subscribed: %(member)s" +msgstr "已订阅: %(member)s" + +msgid "Subscribing" +msgstr "订阅" + #. (tag) msgid "Subscript" msgstr "Subscript" +msgid "Subscription Requests" +msgstr "订阅请求" + +msgid "Subscription request" +msgstr "订阅请求" + +msgid "Subscription request confirmed" +msgstr "订阅请求已经确认" + +msgid "Subscription request succeeded." +msgstr "订阅请求成功。" + +msgid "Subscription rules" +msgstr "订阅规则" + #. (title) msgid "Subsetting the Common Attributes" msgstr "公共属性子集" @@ -31886,16 +37857,39 @@ msgstr "Subversion 服务器设置：" msgid "Successful edit status returned too soon" msgstr "太快返回编辑成功状态" +msgid "Successfully Removed:" +msgstr "成功删除:" + +msgid "Successfully Unsubscribed:" +msgstr "成功取消订阅:" + +msgid "Successfully invited:" +msgstr "成功邀请:" + +msgid "Successfully subscribed:" +msgstr "成功订阅:" + #, c-format msgid "Successor id '%s' (for '%s') already exists in filesystem '%s'" msgstr "后续 id “%s”(对于 %s)已经在文件系统 “%s” 中" +msgid "" +"Suffix for use when this list is an umbrella for other\n" +" lists, according to setting of previous \"umbrella_list\"\n" +" setting." +msgstr "" +"根据前面\"umbrella_list\"的设置，当这个列表是其它列表的保护列表时\n" +" 使用的前缀。" + msgid "Sum of subblock sizes larger than total block content length" msgstr "子块大小之和大于块内容长度" msgid "Summarizing diff can only compare repository to repository" msgstr "只有版本库和版本库才能比较差异概要" +msgid "Sun" +msgstr "星期日" + #. (tag) msgid "Superscript" msgstr "Superscript" @@ -32065,6 +38059,125 @@ msgstr "Symbol" msgid "Symbolic links are not supported on this platform" msgstr "此平台不支持符号链接" +msgid "" +"Synchronize a mailing list's membership with a flat file.\n" +"\n" +"This script is useful if you have a Mailman mailing list and a sendmail\n" +":include: style list of addresses (also as is used in Majordomo). For every\n" +"address in the file that does not appear in the mailing list, the address is\n" +"added. For every address in the mailing list that does not appear in the\n" +"file, the address is removed. Other options control what happens when an\n" +"address is added or removed.\n" +"\n" +"Usage: %(PROGRAM)s [options] -f file listname\n" +"\n" +"Where `options' are:\n" +"\n" +" --no-change\n" +" -n\n" +" Don't actually make the changes. Instead, print out what would be\n" +" done to the list.\n" +"\n" +" --welcome-msg[=]\n" +" -w[=]\n" +" Sets whether or not to send the newly added members a welcome\n" +" message, overriding whatever the list's `send_welcome_msg' setting\n" +" is. With -w=yes or -w, the welcome message is sent. With -w=no, no\n" +" message is sent.\n" +"\n" +" --goodbye-msg[=]\n" +" -g[=]\n" +" Sets whether or not to send the goodbye message to removed members,\n" +" overriding whatever the list's `send_goodbye_msg' setting is. With\n" +" -g=yes or -g, the goodbye message is sent. With -g=no, no message is\n" +" sent.\n" +"\n" +" --digest[=]\n" +" -d[=]\n" +" Selects whether to make newly added members receive messages in\n" +" digests. With -d=yes or -d, they become digest members. With -d=no\n" +" (or if no -d option given) they are added as regular members.\n" +"\n" +" --notifyadmin[=]\n" +" -a[=]\n" +" Specifies whether the admin should be notified for each subscription\n" +" or unsubscription. If you're adding a lot of addresses, you\n" +" definitely want to turn this off! With -a=yes or -a, the admin is\n" +" notified. With -a=no, the admin is not notified. With no -a option,\n" +" the default for the list is used.\n" +"\n" +" --file \n" +" -f \n" +" This option is required. It specifies the flat file to synchronize\n" +" against. Email addresses must appear one per line. If filename is\n" +" `-' then stdin is used.\n" +"\n" +" --help\n" +" -h\n" +" Print this message.\n" +"\n" +" listname\n" +" Required. This specifies the list to synchronize.\n" +msgstr "" +"使用一个普通的文件来同步一个邮件列表的全体成员.\n" +"\n" +"这个脚本将很有用,如果您有一份Mailman邮件列表和一份sendmail\n" +":include:式样的地址列表(Majordomo也如此使用). 对于每一个\n" +"没有出现在邮件列表里却包含在文件里的地址,它们将被添加.\n" +"对于每一个没有出现在文件里的邮件列表内地址,它们将被\n" +"删除.其他的选项用来控制当一个地址被添加或删除时将会\n" +"发生什么.\n" +"\n" +"用法: %(PROGRAM)s [options] -f file listname\n" +"\n" +"这里 `options' 有:\n" +"\n" +" --no-change\n" +" -n\n" +" 不真正作成改变. 相应的,显示\n" +" 列表将有何改变.\n" +"\n" +" --welcome-msg[=]\n" +" -w[=]\n" +" 设置是否向新加入成员发送欢迎信息,\n" +" 而不论列表的 `send_welcome_msg' 设置究竟是什么.\n" +" 使用 -w=yes 或 -w, 欢迎信息将被发送. 使用 -w=no, \n" +" 将不会发送欢迎信息.\n" +"\n" +" --goodbye-msg[=]\n" +" -g[=]\n" +" 设置是否向移除成员发送告别信息,\n" +" 不论列表的`send_goodbye_msg' 的设置.\n" +" 使用-g=yes 或 -g, 告别信息将被发送. 使用 -g=no, \n" +" 将不会发送告别信息.\n" +"\n" +" --digest[=]\n" +" -d[=]\n" +" 选择是否使新加入的成员接收文摘中的信息.\n" +" 使用 -d=yes 或 -d, 他们将成为文摘成员. 使用 -d=no\n" +" (或者没有给出 -d ) 他们将被添加为普通成员.\n" +"\n" +" --notifyadmin[=]\n" +" -a[=]\n" +" 指定在每一次订阅或退订时,管理员是否被通知.\n" +" 如果您加入大量的地址, 您绝对会将这个选项关闭!\n" +" 使用 -a=yes 或 -a, 管理员将被通知.\n" +" 使用 -a=no, 管理员不会被通知. 不给出 -a 选项,\n" +" 将使用列表的默认选项.\n" +"\n" +" --file \n" +" -f \n" +" 这个选项是必需的. 它指定了用来同步的文件.\n" +" Email地址必须每行一个. 如果文件名是\n" +" `-' 那么将使用标准输入.\n" +"\n" +" --help\n" +" -h\n" +" 显示这段信息.\n" +"\n" +" listname\n" +" 必需.指定了同步的列表.\n" + #. (title) msgid "Synopses" msgstr "提纲" @@ -32093,6 +38206,9 @@ msgstr "系统声音(&S)" msgid "System Identifiers" msgstr "系统标示符" +msgid "System error, bad content: %(content)s" +msgstr "系统错误, 错误的内容: %(content)s" + #. Resource IDs: (3857) msgid "System registry entries have been removed and the INI file (if any) was deleted." msgstr "系统注册表及 INI 文件(如果有) 删除完成。" @@ -32177,6 +38293,9 @@ msgstr "任务和过程" msgid "TeX and LaTeX" msgstr "TeX and LaTeX" +msgid "Tend to pending moderator requests" +msgstr "处理待裁决请求" + #. Resource IDs: (219) msgid "Test Only" msgstr "仅测试" @@ -32203,13 +38322,36 @@ msgstr "文本最后更新" msgid "Text Status:" msgstr "文字状态：" +msgid "" +"Text appended to the bottom of every immediately-delivery\n" +" message. " +msgstr "添加到每一封即时投递的邮件末尾的文本" + #. (refpurpose), (entry) msgid "Text at the back of a book describing facts about its production" msgstr "在书的后面的文本描述了关于它的作品的事实。" +msgid "Text attached (as a final message) to the bottom of digests. " +msgstr "加在摘要尾部的文本(作为结束消息)。" + +msgid "Text attached (as an initial message, before the table of contents) to the top of digests. " +msgstr "加在摘要顶部的文本(在内容表格之前作为开始消息)。" + msgid "Text delta chunk not a string" msgstr "文本差异块不是字符串" +msgid "" +"Text prepended to the top of every immediately-delivery\n" +" message. " +msgstr "添加到每一封即时投递的邮件中的文本" + +msgid "" +"Text sent to people leaving the list. If empty, no special\n" +" text will be added to the unsubscribe message." +msgstr "" +"发送给离开列表的成员的文本。如果空，不会有指定的文本\n" +" 添加到退订消息上。" + #. Resource IDs: (207) msgid "Text status" msgstr "文字状态" @@ -32218,6 +38360,28 @@ msgstr "文字状态" msgid "Text that a user sees or might see on a computer screen" msgstr "用户看到或可能看到的在计算机屏幕中的文本" +msgid "" +"Text to include in any\n" +" rejection notice to\n" +" be sent to moderated members who post to this list." +msgstr "" +"应当被包含在退信通知中的文本。" + +msgid "" +"Text to include in any rejection notice to be sent to\n" +" non-members who post to this list. This notice can include\n" +" the list's owner address by %%(listowner)s and replaces the\n" +" internally crafted default message." +msgstr "" +"应当被包含到寄给发信到本列表的非成员的退信通知中的文本。\n" +" 此通知可以包含列表属主地址 %%(listowner)s, 并且替换掉Mailman\n" +" 内定的默认信息。" + +msgid "Text%(sz)s" +msgstr "文本大小为 %(sz)s" + #. (entry) msgid "Thai" msgstr "泰国语" @@ -32306,6 +38470,16 @@ msgstr "“跳格”键" msgid "The \"Title Page\" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, \"Title Page\" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text." msgstr "对于被印刷的书籍，\"扉页\"(Title Page)就是扉页本身以及随后的一些需要保留、易读的页，本许可的材料需要出现在扉页上。对于那些没有扉页的作品形式，扉页代表接近作品最突出的标题的、在文本正文之前的文本。" +msgid "" +"The \"host_name\" is the preferred name for email to\n" +" mailman-related addresses on this host, and generally should be\n" +" the mail host's exchanger address, if any. This setting can be\n" +" useful for selecting among alternative names of a host that has\n" +" multiple addresses." +msgstr "" +"当此主机给mailman相关地址发送邮件时使用此主机名，通常主机名应该是邮件交换机的地址。\n" +"\t\t\t\t当主机有多个地址时，可通过设定此选项为主机选择一个名字。" + #, c-format msgid "The %s request returned invalid XML in the response: %s (%s)" msgstr "%s 请求的响应返回无效XML: %s (%s)" @@ -32353,6 +38527,34 @@ msgstr "定义 MathML 的 W3C 技术建议，一种数学方 msgid "The ProjectStatus database has been updated. Please note that Year has been extended to four digits." msgstr "The ProjectStatus database has been updated. Please note that Year has been extended to four digits." +msgid "" +"The list administrators are the people who have ultimate control over\n" +"all parameters of this mailing list. They are able to change any list\n" +"configuration variable available through these administration web pages.\n" +"\n" +"

    The list moderators have more limited permissions; they are not\n" +"able to change any list configuration variable, but they are allowed to tend\n" +"to pending administration requests, including approving or rejecting held\n" +"subscription requests, and disposing of held postings. Of course, the\n" +"list administrators can also tend to pending requests.\n" +"\n" +"

    In order to split the list ownership duties into administrators and\n" +"moderators, you must set a separate moderator password in the fields below,\n" +"and also provide the email addresses of the list moderators in the\n" +"general options section." +msgstr "" +"列表管理员拥有所有邮件列表参数的最终控制权.\n" +"他们可以更改在管理员页面上列出的所有配置变量.\n" +"\n" +"

    列表主持者 有受限的权限; \n" +"他们不能改变任何列表的参数, 但是他们可以挂起管理请求.\n" +"包括批准或者拒绝滞留订阅请求,清理滞留邮件.当然\n" +"l列表管理员 也可以挂起请求.\n" +"\n" +"

    为了在列表管理员和列表主持者之间分配管理员职责\n" +"您必须在下面的域中设置单独的列表主持者密码,\n" +"并在常规选项部分中提供列表主持者的邮件地址." + #. (para) msgid "The destructor (DESTROY) for the object $b will be called automatically for this object since there can be no other references to it outside this function." msgstr "The destructor (DESTROY) for the object $b will be called automatically for this object since there can be no other references to it outside this function." @@ -32561,6 +38763,24 @@ msgstr "toc 元素定义一个目录，或者更普通的是在文档 msgid "The uri element identifies a Uniform Resource Identifier (URI) in content." msgstr "uri 元素标识在内容中的统一资源标识符(URI)。" +msgid "" +"The List-Post: header is one of the headers\n" +" recommended by\n" +" RFC 2369.\n" +" However for some announce-only mailing lists, only a\n" +" very select group of people are allowed to post to the list; the\n" +" general membership is usually not allowed to post. For lists of\n" +" this nature, the List-Post: header is misleading.\n" +" Select No to disable the inclusion of this header. (This\n" +" does not affect the inclusion of the other List-*:\n" +" headers.)" +msgstr "" +"List-Post:头部是RFC 2369.\n" +" 推荐的头部之一。然而，对一些只限通知的邮件列表，仅有一些人有向列表\n" +" 发送邮件的权利；不允许普通成员发送邮件。对这种类型的列表，List-Post:\n" +" 头部容易让人误解。选择否来禁止此头部。(这不影响可包含其他\n" +" List-*:头部。" + #. (para) msgid "The CD-ROM is like a spoon." msgstr "CD-ROM 就像一个汤勺。" @@ -32662,6 +38882,9 @@ msgstr "MERGE 属性响应包含错误状态" msgid "The MIME Type for DocBook" msgstr "DocBook 的 MIME 类型" +msgid "The Mailman Replybot" +msgstr "Mailman 自动回复机器人" + #. (term) msgid "The Most Recent Version of DocBook" msgstr "DocBook 的最新版本" @@ -32735,6 +38958,15 @@ msgstr "XML 声明语法上与处理指令类似，但它不是。XML 声明必 msgid "The XML parser expands entities and therefore “sees” the entire document. This means that ID/IDREF links can freely cross entity boundaries. Because XIncluded documents are free-standing, a document containing an IDREF that crosses a document boundary cannot be valid. It can be well-formed, and processors can do the right thing, but the parser cannot determine that the document is valid. What's more, the same ID value can occur in several XIncluded documents without causing a validity error. This may have a consequence on the resulting processing." msgstr "XML 解析器展开实体，因此能\"看到\"完整的文档。这意味着 ID/IDREF 链接可以自由的穿越实体边界。因为 XInclude 文档是独立的，包含穿越文档边界的 ID/REF 的文档不见得有效。它可以是结构良好的，处理器能正确处理，但解析器无法确定文档是否有效。更多的是，同样的 ID 能出现在多个 XInclude 文档中而不会引起有效性错误。这也许在结果处理中出现后果。" +msgid "The `join' command is synonymous with `subscribe'.\n" +msgstr "`join'命令和`subscribe'命令是相同的。\n" + +msgid "The `leave' command is synonymous with `unsubscribe'.\n" +msgstr "`leave'命令和`unsubscribe'命令是相同的。\n" + +msgid "The `remove' command is synonymous with `unsubscribe'.\n" +msgstr "命令 \"remove\" 和命令 \"unsubscribe\"是相同的.\n" + #. (refpurpose) msgid "The abbreviation of a title" msgstr "标题的缩写" @@ -32747,6 +38979,22 @@ msgstr "在一个消息集中的一条消息组件的实际文本" msgid "The actually characters used in alphabetic numeration may be locale sensitive. Where the sequence “a”, “b”, “c” might be selected in an English locale, “ア”, “イ”, “ウ” might be selected if Katakana was implied by the current locale." msgstr "用于字母顺序编号的实际字符可能是地区敏感的。次序 “a”, “b”, “c” 可能在英语地区被选择， 如果当前地区暗指是日本片假名，则可能“ア”, “イ”, “ウ”被选择。" +msgid "" +"The address requesting to be changed has\n" +" been subsequently unsubscribed. This request has been\n" +" cancelled." +msgstr "" +"要求更改的地址后来取消了订阅.\n" +" 这次请求被撤销了." + +msgid "" +"The address requesting unsubscription is not\n" +" a member of the mailing list. Perhaps you have already been\n" +" unsubscribed, e.g. by the list administrator?" +msgstr "" +"要求取消订阅的地址不是邮件列表中的成员.\n" +" 可能您已经取消了订阅,比如说被邮件列表的管理员取消?" + #. (para) msgid "The advantage of a controlled vocabulary is that it places the document into a known subject space. Searching the subject space with a particular subject term will find all of the documents that claim to have that subject. There's no need to worry about terms that are synonymous with the search item, or homophones of the search term." msgstr "可控词汇表的好处是放置文档到一个已知的主题空间。用特定主题搜索主题空间将找到所有声称拥有那个主题的文档。不需要担心搜索的条目同义词或同音词。" @@ -32771,6 +39019,37 @@ msgstr "称谓 “application” 通常保留给大型的软件包。例如 annotations and annotates is plain text, not IDREF or IDREFS. That enables modular content files to form associations with elements in other files without generating validation errors." msgstr "annotations 和 annotates 的属性类型是普通的文本，而不是 IDREF 或 IDREFS。这使得标准的内容文件构成一个与在其它文件中的元素的关联而不会产生一个有效性的错误。" @@ -32811,6 +39090,21 @@ msgstr "在 DocBook：权威指南 封面上的鸟是木 msgid "The bottom side only." msgstr "仅底边。" +msgid "" +"The capitalization of this name can be changed to make it\n" +" presentable in polite company as a proper noun, or to make an\n" +" acronym part all upper case, etc. However, the name will be\n" +" advertised as the email address (e.g., in subscribe confirmation\n" +" notices), so it should not be otherwise altered. (Email\n" +" addresses are not case sensitive, but they are sensitive to\n" +" almost everything else :-)" +msgstr "" +"该名字的大写或者首字母的缩写可能被某些公司里作为专用名词\n" +" 。但是，如果该名字被申请作为邮件地址(\n" +" 如：在订阅确认中可以注明)，所以不应该\n" +" 以其他方式改变名字。(邮件地址不是大小写敏感的，\n" +" 但是在其他地方一般是非常敏感的:-)" + #. (para) msgid "The capitals of the states of the United States of America are: …" msgstr "The capitals of the states of the United States of America are: …" @@ -32852,6 +39146,9 @@ msgstr "委员会继续新的 DocBook 开发，保证方案继续满足用户要 msgid "The component suffered from three failings: Of these three, the last was probably the most important." msgstr "The component suffered from three failings: Of these three, the last was probably the most important." +msgid "The confirmation email has been sent." +msgstr "确认邮件已经发送" + #. (para) msgid "The content area is specified by the contentwidth and contentdepth attributes." msgstr "内容区域由 contentwidth 和 contentdepth 属性指定。" @@ -32892,6 +39189,9 @@ msgstr "坐标使用行来表示。坐标的格式是“开始行　结束行” msgid "The coordinates are expressed using the semantics of the CALS graphic attributes. The format of the coordinates is “x1,y1 x2,y2”. This identifies a rectangle with the lower-left corner at (x1,y1) and the upper-right corner at (x2,y2). The X and Y coordinates are integers in the range 0 to 10000; they express a percentage of the total distance from 0.00 to 100.00%. The lower-left corner is (0,0)." msgstr "坐标是使用 CALS 图形属性的语义来表达的。坐标的格式为 “x1,y1 x2,y2” 。这使用在 (x1,y1) 的左下角和在 (x2,y2) 右上角来标识一个矩形。X 和 Y 坐标是 0 到 10000 的整数，它们表示了一个从 0.00 到 100.00% 的全部间隔的百分数。左下角是 (0,0) 。" +msgid "The current archive" +msgstr "当前归档" + #. (para) msgid "The current cell provides header information for the rest of the column that contains it." msgstr "当前单元格提供用于包含它的其余列的标头信息" @@ -33021,6 +39321,27 @@ msgstr "元素将被呈现为横跨整个文本页。" msgid "The element should be rendered in the current text flow (with the flow column width)." msgstr "元素将在当前的文本流中(使用流的列宽)。" +msgid "" +"The email address you supplied is banned from this\n" +" mailing list. If you think this restriction is erroneous, please\n" +" contact the list owners at %(listowner)s." +msgstr "" +"您提供的邮件地址被此邮件列表禁止了。若您认为这是错误的，请联系列表管理员\n" +" %(listowner)s。" + +msgid "" +"The email address you supplied is banned from this mailing list.\n" +"If you think this restriction is erroneous, please contact the list\n" +"owners at %(listowner)s." +msgstr "" +"您提供的邮件地址被禁止。如果您觉得这些限制是错误的，\n" +"请联系列表管理员 %(listowner)s" + +msgid "" +"The email address you supplied is not valid. (E.g. it must contain an\n" +"`@'.)" +msgstr "您提供的邮件地址是无效的。(例如，它必须包含一个`@'。)" + #. (para) msgid "The end of a range" msgstr "一个范围的结尾" @@ -34563,6 +40884,17 @@ msgid "The following format is recommended:" msgstr "推荐下面的格式：" msgid "" +"The following illegal substitution variables were\n" +" found in the %(property)s string:\n" +" %(bad)s\n" +"

    Your list may not operate properly until you correct this\n" +" problem." +msgstr "" +"在%(property)s中发现下列非法的订阅变量值：\n" +" %(bad)s\n" +"

    不更正这些问题，你的列表可能无法正常运作" + +msgid "" "The following repository access (RA) modules are available:\n" "\n" msgstr "" @@ -34610,6 +40942,31 @@ msgstr "标头单元格提供用于包含它的其余列组的标头信息" msgid "The header cell provides header information for the rest of the row group that contains it." msgstr "标头单元格提供用于包含它的其余行组的标头信息" +msgid "" +"The header filter rule pattern\n" +" '%(safepattern)s' is not a legal regular expression. This\n" +" rule will be ignored." +msgstr "" +"头部过滤器规则模式\n" +" '%(safepattern)s' 不是合法的正则表达式。这条规则将被忽略。" + +msgid "" +"The held message with the Subject:\n" +" header %(subject)s could not be found. The most likely\n" +" reason for this is that the list moderator has already approved or\n" +" rejected the message. You were not able to cancel it in\n" +" time." +msgstr "" +"找不到主题头部为 %(subject)s 的滞留信件。\n" +" 最有可能的原因是\n" +" 列表主持者已经批准或者拒绝了这条信件.\n" +" 你不能及时地取消这条信件." + +msgid "" +"The held message you were referred to has\n" +" already been handled by the list administrator." +msgstr "提交给你的滞留信件已经由列表管理员处理了." + #. (para) msgid "The historical advantage of using a public identifier is that it made your documents more portable. For any system on which DocBook is installed, the public identifier will resolve to the appropriate local version of the DTD (if public identifiers can be resolved at all). Today most systems can resolve system identifiers in a similar way." msgstr "使用公共标识符的传统优势是它使你的文档更好地移植。在安装了 DocBook 的任意系统中，公共标识符会解决DTD(如果公共标识符能全部解决)的本地版本。现在大多数系统能使用相似的方法解决系统标识符。" @@ -34623,6 +40980,9 @@ msgstr "" "Hook 脚本返回了一个错误：\n" "%s" +msgid "The hostname of the machine your news server is running on." +msgstr "您的新闻服务器所在主机的主机名。" + #. (para) msgid "The illustrations that appear in this book were produced by Robert Romano using Macromedia Freehand 8 and Adobe Photoshop 5. David Futato was the production editor; Madeleine Newell guided the book through the early stages of production. Mark Nigara was the copyeditor for DocBook: The Definitive Guide. Claire LeBlanc was the production manager. Ellie Cutler was the proofreader; quality assurance was provided by Jeff Holcomb and Claire LeBlanc. This colophon was written by Nicole Arigo." msgstr "这本书中的插图是由 Robert Romano 用 Macromedia Freehand 8 和 Adobe Photoshop 5 制作。 David Futato 是产品编辑； Madeleine Newell 指导本书度过开发的最初阶段。 Mark Nigara 是版权编辑。Claire LeBlanc 是产品经理。 Ellie Cutler 是校对员；Jeff Holcomb 和 Claire LeBlanc 做质量保证。Nicole Arigo 撰写版权声明。" @@ -34714,6 +41074,42 @@ msgstr "新文件的标示行应该位于第 %d 行！" msgid "The line indicating the old file was expected in line %d !" msgstr "旧文件的标示行应该位于第 %d 行！" +msgid "" +"The list administrator email addresses. Multiple\n" +" administrator addresses, each on separate line is okay." +msgstr "" +"列表管理员邮件地址。如果有多个地址，\n" +" 每个地址填写在单独的一行即可。" + +msgid "" +"The list administrator has disabled digest delivery for\n" +" this list, so your delivery option has not been set. However your\n" +" other options have been set successfully." +msgstr "" +"列表管理员已经禁止了此列表的摘要投递功能，所以您的\n" +" 投递选项没有被设置，但是您的其他选项都已成功地设置。" + +msgid "" +"The list administrator has disabled non-digest delivery\n" +" for this list, so your delivery option has not been set. However\n" +" your other options have been set successfully." +msgstr "" +"列表管理员已经禁止了此列表的非摘要投递功能，所以您的\n" +" 投递选项没有被设置，但是您的其他选项都已成功地设置。" + +msgid "" +"The list moderator email addresses. Multiple\n" +" moderator addresses, each on separate line is okay." +msgstr "" +"列表主持人邮件地址。如果有多个地址，\n" +" 每个地址填写在单独的一行即可。" + +msgid "The list password cannot be empty" +msgstr "列表密码不能为空" + +msgid "The list password cannot be empty" +msgstr "列表密码不能为空" + #. (para) msgid "The literal layout should be formatted with a monospaced font" msgstr "字面布局将用一种等宽字体格式化" @@ -34754,14 +41150,79 @@ msgstr "日志信息是路径名" msgid "The log message is a pathname (was -F intended?); use '--force-log' to override" msgstr "日志信息是路径名称 (本来想用 -F 选项的吗？)；请使用“--force-log”强制执行" +msgid "" +"The mailing list `%(listname)s' has been created via the through-the-web\n" +"interface. In order to complete the activation of this mailing list, the\n" +"proper /etc/aliases (or equivalent) file must be updated. The program\n" +"`newaliases' may also have to be run.\n" +"\n" +"Here are the entries for the /etc/aliases file:\n" +msgstr "" +"`%(listname)s' 邮件列表通过Web界面被创建。\n" +"为了激活该邮件列表，需要对/etc/aliases给予适当的更新。\n" +"同时需要运行程序newaliases\n" +"\n" +"以下为需要添加的/etc/aliases相关项 \n" + +msgid "" +"The mailing list `%(listname)s' has been removed via the through-the-web\n" +"interface. In order to complete the de-activation of this mailing list, the\n" +"appropriate /etc/aliases (or equivalent) file must be updated. The program\n" +"`newaliases' may also have to be run.\n" +"\n" +"Here are the entries in the /etc/aliases file that should be removed:\n" +msgstr "" +"`%(listname)s' 邮件列表通过Web界面被移除。\n" +"为了完全删除该邮件列表，需要对/etc/aliases给予适当的更新。\n" +"同时需要运行程序newaliases\n" +"以下为需要删除的/etc/aliases 相关项:\n" + #. (para) msgid "The mandatory processing expectations of a imageobjectco are minimal: a processor is expected to render the image, if possible, and the calloutlist, if present. If more than one imageobject is present, exactly one must be selected. A processor should select the first object that it can, although it is free to choose any of the objects according to implementation-dependent mechanisms." msgstr "imageobjectco 的强制的处理期望是非常少的：如果可能，处理器被期望呈现图像，以及calloutlist ，如果存在的话。如果存在多于一个的 imageobject ，必须明确的选择一个。如果可能，处理器将选择第一个对象，尽管它根据实现依赖机制可以自由的选择任何对象。" +msgid "" +"The master qrunner lock could not be acquired because it appears as if another\n" +"master qrunner is already running.\n" +msgstr "队列管理器的主锁无法获得，可能另一个主队列管理器正在运行。\n" + +msgid "" +"The master qrunner lock could not be acquired, because it appears as if some\n" +"process on some other host may have acquired it. We can't test for stale\n" +"locks across host boundaries, so you'll have to do this manually. Or, if you\n" +"know the lock is stale, re-run mailmanctl with the -s flag.\n" +"\n" +"Lock file: %(LOCKFILE)s\n" +"Lock host: %(status)s\n" +"\n" +"Exiting." +msgstr "" +"队列管理器的主锁无法获得，可能其他主机上的某些进程正在使用它。\n" +"我们不能越过主机来测试过期的主锁，所以您必须手动测试。\n" +"或者，如果您知道主锁已过期，用 -s flag 来重启mailmanctl。\n" +"\n" +"主锁文件: %(LOCKFILE)s\n" +"主锁主机: %(status)s\n" +"\n" +"正在退出。" + +msgid "" +"The master qrunner lock could not be acquired. It appears as though there is\n" +"a stale master qrunner lock. Try re-running mailmanctl with the -s flag.\n" +msgstr "" +"队列管理器的主锁无法获得。可能存在一个过期的队列管理器主锁。\n" +"可以尝试使用 -s flag 来重启mailmanctl。\n" + #. (para) msgid "The maximum legal length for a path name is PATH_MAX, defined in limits.h." msgstr "The maximum legal length for a path name is PATH_MAX, defined in limits.h." +msgid "" +"The maximum member bounce score before the member's\n" +" subscription is disabled. This value can be a floating point\n" +" number." +msgstr "用户退信数的阈值（超过此值您的服务将被关闭）, 该值可设为浮点数。" + #. Resource IDs: (198) msgid "" "The maximum number of action log lines to keep.\n" @@ -34770,6 +41231,24 @@ msgstr "" "保存的最大动作记录行数。\n" "如果新增的行超过此限制，最旧的行会被删除。" +msgid "The message headers matched a filter rule" +msgstr "信件头匹配过滤规则" + +msgid "The message's content type was explicitly disallowed" +msgstr "该信件的内容类型(content type)被明确禁止" + +msgid "The message's content type was not explicitly allowed" +msgstr "该信件的内容类型(content type)没有被明确禁止" + +msgid "The message's file extension was explicitly disallowed" +msgstr "该信件的文件扩展名被明确禁止" + +msgid "The message's file extension was not explicitly allowed" +msgstr "该信件的文件扩展名没有被明确禁止" + +msgid "The moderation policy of the newsgroup." +msgstr "新闻组的节制策略" + #. (para) msgid "The most recent online version of this book can be found at http://docbook.org/." msgstr "本书的最新版本可以在 http://docbook.org/ 找到。" @@ -34870,6 +41349,9 @@ msgstr "一个接口的名称" msgid "The name of an organization other than a corporation" msgstr "一个组织而不仅是一个公司的名称" +msgid "The name of the Usenet group to gateway to and/or from." +msgstr "要链接的Usenet新闻组名" + #. (refpurpose), (entry) msgid "The name of the editor of a document" msgstr "文档编者的姓名" @@ -34902,10 +41384,30 @@ msgstr "参考页的名称、目的和分类" msgid "The names of the entity files in this distribution do not exactly match the names of the files used in the catalog file distributed with DocBook (docbook.cat). Make sure your catalog file points to the right files." msgstr "在这个发行中的实体文件名并不精确匹配由 DocBook 发布的用于编目文件中的文件名(docbook.cat)。确定你的目录文件指向了正确的文件。" +msgid "The new address is already a member: %(newaddr)s" +msgstr "新的地址 %(newaddr)s 已经是成员了" + +msgid "" +"The new address you requested %(newaddr)s is already a member of the\n" +"%(listname)s mailing list, however you have also requested a global change of\n" +"address. Upon confirmation, any other mailing list containing the address\n" +"%(safeuser)s will be changed. " +msgstr "" +"您请求的新地址 %(newaddr)s 已经是邮件列表 %(listname)s 的成员了,\n" +"但是您仍然请求对这个地址进行全局的修改.\n" +"确认后, 其他包含 %(safeuser)s 这个地址的邮件列表将被修改." + #. (para) msgid "The new filename. The mv command changes the name of the old file to newfile. If newfile exists when mv is executed, it will be replaced by the old file." msgstr "新文件名。mv 命令修改老文件名到 newfile。如果在 mv 执行时 newfile 已存在，它将被老文件所替换。" +msgid "" +"The next digest will be sent as volume\n" +" %(volume)s, number %(number)s" +msgstr "" +"下一则摘要将作为第\n" +" %(volume)s册，%(number)s号发送。" + #. (refpurpose), (entry) msgid "The number of an issue of a journal" msgstr "期刊发行的编号" @@ -34918,6 +41420,19 @@ msgstr "在条目表格中的列数。必须是一个大于零的整数。" msgid "The number of columns in the table. Must be an integer greater than zero." msgstr "在表格中的列数。必须是一个大于零的整数。" +msgid "" +"The number of days after which a member's bounce information\n" +" is discarded, if no new bounces have been received in the\n" +" interim. This value must be an integer." +msgstr "" +"取消某成员退信信息所需天数，在此天数内若系统未收到新的退信，则丢弃以前保留的退信信息。\n" +"该值应为一个整数。" + +msgid "" +"The number of days between sending the Your Membership\n" +" Is Disabled warnings. This value must be an integer." +msgstr "发出你的成员资格被禁止警告的间隔天数. 此值必须是整数。" + #. (para) msgid "The number of seg elements must be the same as the number of segtitle elements in the parent segmentedlist" msgstr "在父 segmentedlist 中的 seg 元素数量必须和 segtitle 元素的数量一致" @@ -35152,6 +41667,9 @@ msgstr "处理系统通常被期望按出现的顺序呈现每个在集合中的 msgid "The prototype of a function" msgstr "一个函数的原型" +msgid "The public name of this list (make case-changes only)." +msgstr "该列表的公共名字(仅能做大小写改变)。" + #. (refpurpose), (entry) msgid "The publisher of a document" msgstr "文档的发行者。" @@ -35192,6 +41710,16 @@ msgstr "请求的响应至少有一个错误" msgid "The response contains a non-conforming HTTP status line" msgstr "响应包含了不一致的HTTP状态行" +msgid "" +"The results of your email command are provided below.\n" +"Attached is your original message.\n" +msgstr "" +"您的邮件命令的执行结果提供如下。\n" +"附件中是您的原始信件。\n" + +msgid "The results of your email commands" +msgstr "您的邮件命令执行结果" + #. (para) msgid "The right and left sides only." msgstr "仅右边和左边。" @@ -35251,6 +41779,27 @@ msgstr "启动服务失败" msgid "The service failed to start; an internal error occurred while starting the service" msgstr "发生内部错误，启动服务失败" +msgid "" +"The site administrator at %(hostname)s has changed the password for your\n" +"mailing list %(listname)s. It is now\n" +"\n" +" %(notifypassword)s\n" +"\n" +"Please be sure to use this for all future list administration. You may want\n" +"to log in now to your list and change the password to something more to your\n" +"liking. Visit your list admin page at\n" +"\n" +" %(adminurl)s\n" +msgstr "" +"%(hostname)s的站点管理员为您的邮件列表 %(listname)s 修改了口令。新口令为：\n" +"\n" +" %(notifypassword)s\n" +"\n" +"在以后的管理工作中请务必使用新口令。您现在可以登录到您的列表中，把口令修改\n" +"得更合乎您的口味。访问您的列表管理页：\n" +"\n" +" %(adminurl)s\n" + #. (para) msgid "The size of the viewport area and the content area are defined in terms of lengths (width and depth)." msgstr "viewport area 和内容区域的尺寸被定义在一些长度项目中(宽度和深度)" @@ -35305,6 +41854,9 @@ msgstr "一个范围的开始" msgid "The structure of indexentry is parallel to the structure of indexterm. Where indexterm has primary, secondary, tertiary, see, and seealsoindexentry, has primaryie, secondaryie, and tertiaryie, seeie, and seealsoie." msgstr "indexentry 与 indexterm 的结构平级。indexterm 有 primary、secondary、tertiary、see 和 seealso 子元素，indexentry 也有 primaryie、secondaryie 和 tertiaryie、seeie 和 seealsoie。" +msgid "The subscribers list" +msgstr "订阅者列表" + #. (refpurpose), (entry) msgid "The subtitle of a document" msgstr "文档的子标题" @@ -35363,6 +41915,21 @@ msgstr "GUI 中在一个按钮上的文本" msgid "The text printed on a key on a keyboard" msgstr "打印在键盘的一个键上的文本" +msgid "" +"The text will be treated as html except that\n" +" newlines will be translated to <br> - so you can use links,\n" +" preformatted text, etc, but don't put in carriage returns except\n" +" where you mean to separate paragraphs. And review your changes -\n" +" bad html (like some unterminated HTML constructs) can prevent\n" +" display of the entire listinfo page." +msgstr "" +"文本将作为html片段对待，除了\n" +" 换行会被转换成<br> - 所以你能使用链接，\n" +" 预定格式文本等等，但是不要使用回车，除非你打算\n" +" 新建段落。预览你的改变 -\n" +" 错误的html(像一些没有结束的html结构)\n" +" 能影响整个列表信息页面的显示。" + #. Resource IDs: (195) msgid "" "The time in seconds after which the parsing of the selected files stops.\n" @@ -35409,6 +41976,67 @@ msgstr "仅底边和底边。" msgid "The top side only." msgstr "仅顶部边。" +msgid "" +"The topic filter categorizes each incoming email message\n" +" according to regular\n" +" expression filters you specify below. If the message's\n" +" Subject: or Keywords: header contains a\n" +" match against a topic filter, the message is logically placed\n" +" into a topic bucket. Each user can then choose to only\n" +" receive messages from the mailing list for a particular topic\n" +" bucket (or buckets). Any message not categorized in a topic\n" +" bucket registered with the user is not delivered to the list.\n" +"\n" +"

    Note that this feature only works with regular delivery, not\n" +" digest delivery.\n" +"\n" +"

    The body of the message can also be optionally scanned for\n" +" Subject: and Keywords: headers, as\n" +" specified by the topics_bodylines_limit\n" +" configuration variable." +msgstr "" +"主题过滤器根据您在下面指定的\n" +" 正则表达式来对收到的邮件进行分类。如果某邮件的Subject:\n" +" 头或Keywords:头匹配一个主题过滤器，那么此邮件将在逻辑上\n" +" 被放进一个主题桶。每个列表成员都可以选择只从邮件列表中接收属于\n" +" 某个或某几个主题桶的邮件。不属于用户注册的任何主题桶的信件将不会被投递\n" +" 到列表中。\n" +"\n" +"

    注意，此特性只工作在普通投递模式，而不工作于摘要投递模式。\n" +"\n" +"

    您也可以在topics_bodylines_limit\n" +" 指定配置选项以在信件正文中寻找Subject:头和Keywords:\n" +" 头。" + +msgid "" +"The topic matcher will scan this many lines of the message\n" +" body looking for topic keyword matches. Body scanning stops when\n" +" either this many lines have been looked at, or a non-header-like\n" +" body line is encountered. By setting this value to zero, no body\n" +" lines will be scanned (i.e. only the Keywords: and\n" +" Subject: headers will be scanned). By setting this\n" +" value to a negative number, then all body lines will be scanned\n" +" until a non-header-like line is encountered.\n" +" " +msgstr "" +"主题匹配器将在信件正文中扫描这么多行以寻找要匹配的主题关键字。\n" +" 当这么多行都已经扫描完或者遇到一个不象头部的行时，扫描终止。\n" +" 若这个值设定为0，则将不会对正文进行扫描(也就是说，只有Keywords:\n" +" 头和Subject:头会被扫描)。把这个值设为负数，则所有\n" +" 的行都将被扫描，直至遇到一个不象头部的行。\n" +" " + +msgid "" +"The topic pattern '%(safepattern)s' is not a\n" +" legal regular expression. It will be discarded." +msgstr "" +"主题模式 '%(safepattern)s' 不是一个合法的正则\n" +" 表达式。它将被丢弃。" + #. Resource IDs: (82) msgid "" "The two selected URL's are not created from the same root.\n" @@ -35453,6 +42081,9 @@ msgstr "分隔的层级结构的值允许在参考页中的内容模型定制与 msgid "The value returned by a function" msgstr "函数返回的值" +msgid "The variable `m' is the %(listname)s MailList instance" +msgstr "变量'm'是 %(listname)s 的MailList实例" + #. (para) msgid "The version of the software product or component to which this topic applies" msgstr "这个主题应用的软件产品或组件的版本" @@ -35524,6 +42155,9 @@ msgstr "" msgid "There are many ways to present a variable list. DocBook does not mandate any particular presentation. The termlength attribute may influence the presentation of terms. The termlength attribute is often specified as a number of characters, but other forms are possible. This is an interchange issue." msgstr "有许多方法可以呈现一个变量列表。DocBook 没有要求任何特定的呈现。termlength 属性影响 term 的呈现。termlength 通常被指定为字符的数量，但其它构成也是可能的。这是一个 交换问题 。" +msgid "There are no pending requests." +msgstr "没有挂起的请求." + #. (para) msgid "There are several undocumented settings for debug, among them 3.27 to enable a complete trace and 3.8 to debug the spell checker. For a complete list of the possible settings, see edit/debug.h." msgstr "There are several undocumented settings for debug, among them 3.27 to enable a complete trace and 3.8 to debug the spell checker. For a complete list of the possible settings, see edit/debug.h." @@ -35545,6 +42179,83 @@ msgstr "" msgid "There are two common presentation styles for function synopses, “K&R” style and “ANSI” style." msgstr "有二种用于函数提要的普通呈现样式： “K&R” 样式和 “ANSI” 样式。" +msgid "" +"There are two ownership roles associated with each mailing\n" +" list. The list administrators are the people who have\n" +" ultimate control over all parameters of this mailing list. They\n" +" are able to change any list configuration variable available\n" +" through these administration web pages.\n" +"\n" +"

    The list moderators have more limited permissions;\n" +" they are not able to change any list configuration variable, but\n" +" they are allowed to tend to pending administration requests,\n" +" including approving or rejecting held subscription requests, and\n" +" disposing of held postings. Of course, the list\n" +" administrators can also tend to pending requests.\n" +"\n" +"

    In order to split the list ownership duties into\n" +" administrators and moderators, you must\n" +" set a separate moderator password,\n" +" and also provide the email\n" +" addresses of the list moderators. Note that the field you\n" +" are changing here specifies the list administrators." +msgstr "" +"每个邮件列表有两个管理者，他们扮演着不一样的角色。\n" +" 列表管理员拥有最大的权力。\n" +" 他们可以通过这些管理页面\n" +" 改变任何列表配置变量。\n" +"\n" +"

    列表主持人的权力受到一定的限制，\n" +" 他们不能改变列表配置变量，但他们允许管理一些\n" +" 待处理的管理请求，包括同意或拒绝保存的订阅请求、\n" +" 丢弃邮件等。当然列表管理员也能够管理\n" +" 未处理的请求。\n" +"\n" +"

    为了将列表所有者的职责分给管理员\n" +" 和主持人，你必须\n" +" 设置一个单独的主持人密码，\n" +" 和提供列表主持人的邮件\n" +" 地址。注意，你在这里改变的区域定义的是列表管理员。" + +msgid "" +"There are two ownership roles associated with each mailing\n" +" list. The list administrators are the people who have\n" +" ultimate control over all parameters of this mailing list. They\n" +" are able to change any list configuration variable available\n" +" through these administration web pages.\n" +"\n" +"

    The list moderators have more limited permissions;\n" +" they are not able to change any list configuration variable, but\n" +" they are allowed to tend to pending administration requests,\n" +" including approving or rejecting held subscription requests, and\n" +" disposing of held postings. Of course, the list\n" +" administrators can also tend to pending requests.\n" +"\n" +"

    In order to split the list ownership duties into\n" +" administrators and moderators, you must\n" +" set a separate moderator password,\n" +" and also provide the email addresses of the list moderators in\n" +" this section. Note that the field you are changing here\n" +" specifies the list moderators." +msgstr "" +"每个邮件列表有两个所有者角色。\n" +" 列表管理员是控\n" +" 制该列表所有参数的成员。\n" +" 他们可以通过这些管理页面\n" +" 改变任何可变的列表配置变量。\n" +"\n" +"

    列表主持人有其他一些限制的许可；\n" +" 他们不能改变列表配置变量，但他们允许管理一些\n" +" 待处理的管理请求，包括同意或拒绝保存的订阅请求，\n" +" 和丢弃邮件。当然列表管理员也能够处理\n" +" 未处理的请求。\n" +"\n" +"

    为了将列表所有者的职责分给管理员\n" +" 和主持人，你必须\n" +" 设置一个单独的主持人密码，\n" +" 和提供列表主持人的邮件\n" +" 地址。注意，你在这里改变的区域定义的是列表支持人。" + #. (para) msgid "There are two ways that scaling can be specified, with the scale attribute or with the scalefit attribute." msgstr "这儿有二种方法指定缩放比例，使用 scale 属性或 scalefit 属性。" @@ -35588,6 +42299,17 @@ msgstr "修改记录对于 DocBook V5.0 没有意义。" msgid "There is nothing to add. All the files and folders are either under version control or have been ignored using the svn:ignore property or the global ignore configuration setting." msgstr "没有可增加的条目，所有文件和文件夹都已经用 Subversion 进行了版本控制或者在 svn:ignore 属性或全局忽略设置中设为忽略。" +msgid "There was no digest to send." +msgstr "没有要发送的摘要。" + +msgid "" +"There were some problems deleting the mailing list\n" +" %(listname)s. Contact your site administrator at %(sitelist)s\n" +" for details." +msgstr "" +"在删除邮件列表%(listname)s时出现了一些问题。\n" +" 联系您的站点管理员 %(sitelist)s 以获取详情。" + #. Resource IDs: (83) msgid "There's nothing to unlock. No file has a lock in this working copy." msgstr "没有项目被解锁。此工作副本中没有被锁定的文件。" @@ -35596,6 +42318,16 @@ msgstr "没有项目被解锁。此工作副本中没有被锁定的文件。" msgid "Thesaurus" msgstr "知识库" +msgid "" +"These are all the natural languages supported by this list.\n" +" Note that the\n" +" default\n" +" language must be included." +msgstr "" +"这些是列表支持的自然语言，注意：必须包括\n" +" \n" +" 默认语言。" + #. (para) msgid "These are calls to the constructor new in the object classes." msgstr "These are calls to the constructor new in the object classes." @@ -37104,6 +43836,79 @@ msgstr "这些元素包含 year： 。" msgid "These elements describe aspects of a user interface: user interfaces, describing (elements)elementsuser interfaces, describing" msgstr "下面这些元素描述了用户接口外观：用户接口，描述 (元素)元素用户接口，描述" +msgid "" +"These policies control the automatic bounce processing system\n" +" in Mailman. Here's an overview of how it works.\n" +"\n" +"

    When a bounce is received, Mailman tries to extract two pieces\n" +" of information from the message: the address of the member the\n" +" message was intended for, and the severity of the problem causing\n" +" the bounce. The severity can be either hard or\n" +" soft meaning either a fatal error occurred, or a\n" +" transient error occurred. When in doubt, a hard severity is used.\n" +"\n" +"

    If no member address can be extracted from the bounce, then the\n" +" bounce is usually discarded. Otherwise, each member is assigned a\n" +" bounce score and every time we encounter a bounce from\n" +" this member we increment the score. Hard bounces increment by 1\n" +" while soft bounces increment by 0.5. We only increment the bounce\n" +" score once per day, so even if we receive ten hard bounces from a\n" +" member per day, their score will increase by only 1 for that day.\n" +"\n" +"

    When a member's bounce score is greater than the\n" +" bounce score\n" +" threshold, the subscription is disabled. Once disabled, the\n" +" member will not receive any postings from the list until their\n" +" membership is explicitly re-enabled (either by the list\n" +" administrator or the user). However, they will receive occasional\n" +" reminders that their membership has been disabled, and these\n" +" reminders will include information about how to re-enable their\n" +" membership.\n" +"\n" +"

    You can control both the\n" +" number\n" +" of reminders the member will receive and the\n" +" frequency with which these reminders are sent.\n" +"\n" +"

    There is one other important configuration variable; after a\n" +" certain period of time -- during which no bounces from the member\n" +" are received -- the bounce information is\n" +" considered\n" +" stale and discarded. Thus by adjusting this value, and the\n" +" score threshold, you can control how quickly bouncing members are\n" +" disabled. You should tune both of these to the frequency and\n" +" traffic volume of your list." +msgstr "" +"这些策略控制Mailman中的自动退信处理系统。下面是对其工作方式的\n" +" 简要说明.\n" +"\n" +"

    一旦收到一封退信, Mailman尝试从中抽取两条信息: 消息的目的成员\n" +" 的邮件地址, 以及导致退信的问题的严重性. 严重性可能是 严重 或\n" +" 轻微 这分别意味着致命错误, 或仅是传送错误. 不能决定时就认为是\n" +" \"严重\". \n" +"\n" +"

    如果退信中得不到成员地址, 那么这封退信通常被忽略掉. 另外, 每\n" +" 个成员都被赋予一个退信值 且每当遇到一个来自某成员的退信,\n" +" 我们就增加该成员的退信值. 严重的退信增加1, 而轻微的退信增加0.5. \n" +" 每天我们只增加一次退信值, 因此急事我们一天内从一个成员处收到10\n" +" 退信, 他的退信值当天也仅增加1.\n" +"\n" +"

    若一个成员的退信值大于 退信值\n" +" 阈值, 那么他的订阅就被禁止了, 一旦被禁止, \n" +" 这个成员就不在收到列表里的任何消息, 除非他被列表管理员或该用户\n" +" 自己显式地重新开禁然而,他会收到相应的提示函,告知他已被禁止,\n" +" , 提示函里同时会包含关于用户如何开禁的信息.\n" +"\n" +"

    你既可控制该成员收到的 提示函 数量也可控制提示函发送的 \n" +" 频率.\n" +"\n" +"

    有几个重要的配置变量; 若一段时间不再从该用户处收到退信\n" +" ,退信信息就被 认为 过期 而被取消. 因此通过调整这个时长, 和刚才提到\n" +" 的分数阈值, 你就能控制退信的用户多快被禁止. 您应该根据您的列表的\n" +" 发信频度和通信量同时调节这两个值." + #, c-format msgid "They want to change the property value to '%s', you want to delete the property.\n" msgstr "他人想改变其取值为 “%s”，你想删除此属性。\n" @@ -37112,6 +43917,9 @@ msgstr "他人想改变其取值为 “%s”，你想删除此属性。\n" msgid "They want to delete the property, you want to change the value to '%s'.\n" msgstr "他人想删除此属性，你想改变其取值为 “%s”。\n" +msgid "Third" +msgstr "第三" + #. (para) msgid "Thirsty? Have some H2O." msgstr "Thirsty? Have some H2O." @@ -37239,6 +44047,17 @@ msgstr "" msgid "This client is too old to work with working copy '%s'; please get a newer Subversion client" msgstr "此客户端太旧，不能存取工作副本“%s”；请取得 Subversion 客户端的新版本" +msgid "" +"This description is used when the mailing list is listed with\n" +" other mailing lists, or in headers, and so forth. It should\n" +" be as succinct as you can get it, while still identifying what\n" +" the list is." +msgstr "" +"当该邮件列表和其他邮件列表一起被列出、一起出现\n" +" 在标题中等，在这些情况下，使用这个短语。\n" +" 该短语要简洁，这样你才容易理解，同时它\n" +" 还要能标识出列表。" + #. (para) msgid "This directory holds MS-DOS, the operating system that was installed before Windows NT." msgstr "This directory holds MS-DOS, the operating system that was installed before Windows NT." @@ -37331,6 +44150,29 @@ msgstr "此空元素指向外部音频数据。" msgid "This function returns a two-element list." msgstr "This function returns a two-element list." +msgid "" +"This is %(also)sa hidden list, which means that the\n" +" list of members is available only to the list administrator." +msgstr "这是一个 %(also)s 隐藏列表，这意味着成员列表仅对列表管理员可见。" + +msgid "" +"This is %(also)sa private list, which means that the\n" +" list of members is not available to non-members." +msgstr "这是一个 %(also)s 私有列表，这意味着非成员无法访问成员列表。" + +msgid "" +"This is %(also)sa public list, which means that the\n" +" list of members list is available to everyone." +msgstr "这是一个 %(also)s 公共列表，这意味着成员列表对任何人都可见。" + +msgid "" +"This is a closed list, which means your subscription\n" +" will be held for approval. You will be notified of the list\n" +" moderator's decision by email." +msgstr "" +"这是一个关闭的列表，这意味着你的订阅请求将被暂缓以待\n" +" 批准。列表管理员作出决定后将通过电子邮件通知你。" + #. (para) msgid "This is a slight change in semantics introduces in DocBook V5.0CR3. Earlier versions used a single glossterm to identify the term. However, using a glossterm made it impossible to refer to other defined terms in the definition of a term, so the decision was made to switch to firstterm." msgstr "在 DocBook V5.0CR3 中的语义介绍中有一点细微改变。早期版本使用一个单独的 glossterm 标识术语。可是，使用 glossterm 使它不能引用在术语定义中的其它被定义的术语，所以决定切换到 firstterm 。" @@ -37372,6 +44214,21 @@ msgstr "" "正确的路径不能包含“<<>|\"?*:”或以下设备名：\n" "com1-com9，lpt1-lpt9，prn，aux，con，nul，clock$" +msgid "" +"This is the default natural language for this mailing list.\n" +" If more than one\n" +" language is supported then users will be able to select their\n" +" own preferences for when they interact with the list. All other\n" +" interactions will be conducted in the default language. This\n" +" applies to both web-based and email-based messages, but not to\n" +" email posted by list members." +msgstr "" +"这是此邮件列表使用的默认自然语言，如果邮件列表\n" +" 支持的语言多于一种\n" +" ，用户可以选择选择他们与列表交互时使用的语言。此后其他所有的交互\n" +" 都将使用用户选择的语言。这项规则适用于基于网页和电子邮件的信息，但不\n" +" 适用于列表成员所发送的邮件。" + #. (para) msgid "This is the synopsis of a class" msgstr "这是一个类的提纲" @@ -37380,10 +44237,58 @@ msgstr "这是一个类的提纲" msgid "This is the synopsis of an interface" msgstr "这是一个接口的提纲" +msgid "This list" +msgstr "该列表" + +msgid "This list does not support digest delivery." +msgstr "此列表不支持定期投递摘要。" + +msgid "This list has no members." +msgstr "次列表没有成员。" + +msgid "This list is restricted; your message was not approved." +msgstr "该列表受限制；您的信息没有经过批准。" + +msgid "This list only supports digest delivery." +msgstr "此列表仅支持投递定期摘要。" + +msgid "This list only supports digest subscriptions!" +msgstr "此列表仅能订阅摘要！" + #. Resource IDs: (594) msgid "This method covers the case when you have made one or more revisions to a branch (or to the trunk) and you want to port those changes across to a different branch." msgstr "这个方法覆盖了你已经在分支(或主干)提交了版本，要合并这些修改到不同分支的情况。" +msgid "" +"This page allows you as the list owner, to permanent\n" +" remove this mailing list from the system. This action is not\n" +" undoable so you should undertake it only if you are absolutely\n" +" sure this mailing list has served its purpose and is no longer necessary.\n" +"\n" +"

    Note that no warning will be sent to your list members and after this\n" +" action, any subsequent messages sent to the mailing list, or any of its\n" +" administrative addreses will bounce.\n" +"\n" +"

    You also have the option of removing the archives for this mailing list\n" +" at this time. It is almost always recommended that you do\n" +" not remove the archives, since they serve as the\n" +" historical record of your mailing list.\n" +"\n" +"

    For your safety, you will be asked to reconfirm the list password.\n" +" " +msgstr "" +"这个页面允许列表属主从系统中永久性地删除此邮件列表。\n" +" 此动作是不可撤销的，所以在确认删除之前请您三思。\n" +"\n" +"

    注意，将不会向列表成员发送任何的警告信息，并且在删除列表后，所有发送给\n" +" 此列表或者列表管理员的信件都将被退回。\n" +"\n" +"

    您可以在删除列表的同时也删除列表的邮件存档。但是我们强烈建议您\n" +" 不要删除这些存档，因为它们是您的邮件列表的历史记录。\n" +"\n" +"

    为安全起见，您将被要求再次确认列表管理口令。\n" +" " + #. (para) msgid "This paragraph contains an inline term definition. A software module called an XML processor is used to read XML documents and provide access to their content and structure. The definition comes from the XML Recommendation." msgstr "This paragraph contains an inline term definition. A software module called an XML processor is used to read XML documents and provide access to their content and structure. The definition comes from the XML Recommendation." @@ -37426,10 +44331,146 @@ msgstr "该属性只能设置在文件夹上，不能在文件上设置。" msgid "This property must not have multiple lines. Only one line is allowed." msgstr "该属性只允许增加一行，不能增加多行文本。" +msgid "" +"This section allows you to configure subscription and\n" +" membership exposure policy. You can also control whether this\n" +" list is public or not. See also the\n" +" Archival Options section for\n" +" separate archive-related privacy settings." +msgstr "" +"您可以在本小节中配置订阅及成员身份公开策略。您也可以\n" +" 控制此列表是否是公开的。参考归档选\n" +" 项小节以获取归档相关的隐私策略。" + +msgid "" +"This section allows you to configure various anti-spam\n" +" filters posting filters, which can help reduce the amount of spam\n" +" your list members end up receiving.\n" +" " +msgstr "" +"您可以在本小节配置一些垃圾邮件过滤器，这将有助于减少\n" +" 列表成员收到的垃圾邮件数量。\n" +" " + +msgid "" +"This section allows you to configure various filters based on\n" +" the recipient of the message." +msgstr "您可以在本小节配置一些基于收信人地址的过滤器。" + +msgid "" +"This setting determines the moderation policy of the\n" +" newsgroup and its interaction with the moderation policy of the\n" +" mailing list. This only applies to the newsgroup that you are\n" +" gatewaying to, so if you are only gatewaying from\n" +" Usenet, or the newsgroup you are gatewaying to is not moderated,\n" +" set this option to None.\n" +"\n" +"

    If the newsgroup is moderated, you can set this mailing list\n" +" up to be the moderation address for the newsgroup. By selecting\n" +" Moderated, an additional posting hold will be placed in\n" +" the approval process. All messages posted to the mailing list\n" +" will have to be approved before being sent on to the newsgroup,\n" +" or to the mailing list membership.\n" +"\n" +"

    Note that if the message has an Approved header\n" +" with the list's administrative password in it, this hold test\n" +" will be bypassed, allowing privileged posters to send messages\n" +" directly to the list and the newsgroup.\n" +"\n" +"

    Finally, if the newsgroup is moderated, but you want to have\n" +" an open posting policy anyway, you should select Open list,\n" +" moderated group. The effect of this is to use the normal\n" +" Mailman moderation facilities, but to add an Approved\n" +" header to all messages that are gatewayed to Usenet." +msgstr "" +"这个设置检测新闻组的节制策略以及它和邮件列表节制策略的相互作用。该设置仅应用于\n" +" 您正通过网关连接至的新闻组，所以如果您只是从Usenet\n" +" 向外连接，或者你正通过网关连接的新闻组不受节制，\n" +" 请将该选项设为不。\n" +"\n" +"

    如果新闻组受节制，您可以将该邮件列表设为新闻组的缓冲地址。通过\n" +" 选定节制，一份额外的消息会放置到审核程序中。所有发\n" +" 送到邮件列表的信息将在被发送到新闻组或者邮件列表成员之前经过审核。\n" +"\n" +"

    注意如果信息中包含一个Approved头部，同时头部里还有\n" +" 列表的管理口令，则这个暂存测试将被绕开，将允许有特权的发送者直接\n" +" 往列表和新闻组发送信息。\n" +"\n" +"

    最后，如果新闻组受节制，但是您又想要使用开放的发信策略,\n" +" 您可以选定开放的列表，节制的组。这将使用标准的\n" +" Mailman节制设施，但是在所有通过网关发送到Usenet的信息中\n" +" 加上了一个Approved头部。" + #. (para) msgid "This software is provided as is, without expressed or implied warranty." msgstr "This software is provided as is, without expressed or implied warranty." +msgid "" +"This text will be prepended to subject lines of messages\n" +" posted to the list, to distinguish mailing list messages in\n" +" mailbox summaries. Brevity is premium here, it's ok to shorten\n" +" long mailing list names to something more concise, as long as it\n" +" still identifies the mailing list.\n" +" You can also add a sequential number by %%d substitution\n" +" directive. eg.; [listname %%d] -> [listname 123]\n" +" (listname %%05d) -> (listname 00123)\n" +" " +msgstr "" +"这些文本将被加在向列表发送的消息的主题行前，\n" +" 用来在收件箱中区分列表消息。\n" +" 这里简洁才是受欢迎的，将长长\n" +" 的邮件列表名缩写更简洁的形式就\n" +" 行，只要它仍能唯一标识邮件列表。\n" +" 你也可以用%%d替代符添加序列号。\n" +" 例如：[listname %%d] -> [listname 123]\n" +" (listname %%05d) -> (listname 00123)\n" +" " + +msgid "" +"This value may be either the name of your news server, or\n" +" optionally of the format name:port, where port is a port number.\n" +"\n" +" The news server is not part of Mailman proper. You have to\n" +" already have access to an NNTP server, and that NNTP server must\n" +" recognize the machine this mailing list runs on as a machine\n" +" capable of reading and posting news." +msgstr "" +"这个值可以是您新闻服务器的名字，或者是 name:port 的形式，\n" +" port是一个端口号。\n" +"\n" +" 新闻服务器不是Mailman的组成部分。您必须已经可以访问一个NNTP服务器，\n" +" 并且此NNTP服务器必须已把此邮件列表所在的主机认作是可以阅读和发布新\n" +" 闻的主机。" + +msgid "" +"This value, if any, will be added to the front of the\n" +" new-subscriber welcome message. The rest of the welcome message\n" +" already describes the important addresses and URLs for the\n" +" mailing list, so you don't need to include any of that kind of\n" +" stuff here. This should just contain mission-specific kinds of\n" +" things, like etiquette policies or team orientation, or that kind\n" +" of thing.\n" +"\n" +"

    Note that this text will be wrapped, according to the\n" +" following rules:\n" +"

    • Each paragraph is filled so that no line is longer than\n" +" 70 characters.\n" +"
    • Any line that begins with whitespace is not filled.\n" +"
    • A blank line separates paragraphs.\n" +"
    " +msgstr "" +"这个值，将被加到新订阅者的欢迎消息的前面。欢迎消息\n" +" 的其余部分已经描述了邮件列表的地址和URL，\n" +" 所以你不必在这里包含任何的这类信息。\n" +" 这应该仅仅包含使命性的，像方针，团\n" +" 队方向这类的说明。\n" +"\n" +"

    注意这些文本将根据一下规则被封装：\n" +"

    • 填充段落，使得每行不超过70个字符。\n" +"
    • 任何以空白符开始的行不被填充。\n" +"
    • 空白行分割段落。\n" +"
    " + #. (para) msgid "This variant of phrase is used in places where the content model is restricted to only the “ubiquitous” inlines." msgstr "这个 phrase 的变体用于内容模型仅被限制在“普遍存在的”行内的地方。" @@ -37438,6 +44479,9 @@ msgstr "这个 phrase 的变体用于内容模型仅被限制在“ msgid "Three" msgstr "Three" +msgid "Thu" +msgstr "星期四" + #. Resource IDs: (65535) msgid "Timeouts" msgstr "超时" @@ -37463,6 +44507,14 @@ msgstr "" msgid "To continue with the example above, let's say that you've got:" msgstr "继续使用以上的示例，让我们看看结果：" +msgid "" +"To finish creating your mailing list, you must edit your /etc/aliases (or\n" +"equivalent) file by adding the following lines, and possibly running the\n" +"`newaliases' program:\n" +msgstr "" +"为了完成邮件列表的创建，您需要编辑/etc/aliases或者相关文件，\n" +"并添加如下行内容，然后运行newaliases程序：\n" + #. (para) msgid "To move a highlighted region, use ShiftButton1 and drag the text to the new location." msgstr "To move a highlighted region, use ShiftButton1 and drag the text to the new location." @@ -37483,10 +44535,35 @@ msgstr "" "使用 “svn propdel” 关闭属性 %s；\n" "设置属性为 “%s” 不会关闭它。" +msgid "" +"To unsubscribe from %(realname)s, get a password reminder,\n" +" or change your subscription options %(either)senter your subscription\n" +" email address:\n" +"

    " +msgstr "" +"为了从 %(realname)s 退订，获得口令提示函，或者改变你的订阅选项 %(either)s输入你\n" +" 用来订阅的电子邮件地址:\n" +"

    " + #. (para) msgid "To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:" msgstr "要使用本许可证发布你写的文档，请在文档中包含本许可证的一个副本，并在紧接着扉页之后加入如下版权声明与许可声明：" +msgid "" +"To visit the administrators configuration page for an\n" +" unadvertised list, open a URL similar to this one, but with a '/' and\n" +" the %(extra)slist name appended. If you have the proper authority,\n" +" you can also create a new mailing list.\n" +"\n" +"

    General list information can be found at " +msgstr "" +"要访问未公开列表的管理员配置页面\n" +" , 打开一个与此相似的链接, 但是附加一个 '/' 和\n" +" %(extra)s列表名。 如果您有权限,\n" +" 你还可以 创建一个新的邮件列表.\n" +"\n" +"

    列表常规信息可在这里找到" + #. Resource IDs: (1201, 65535) msgid "To:" msgstr "结束：" @@ -37495,6 +44572,12 @@ msgstr "结束：" msgid "To: (end URL and revision of the range to merge)" msgstr "结束： （合并范围的结束URL和版本）" +msgid "Today's Topics (%(msgcount)d messages)" +msgstr "本日主题 (%(msgcount)d 封信件)" + +msgid "Today's Topics:\n" +msgstr "本日主题:\n" + #. (tag) msgid "Token" msgstr "Token" @@ -37516,6 +44599,31 @@ msgstr "导入命令参数太多" msgid "Too many nested items" msgstr "太多嵌套的项" +msgid "Too many recipients to the message" +msgstr "该信息的收件人太多" + +msgid "Topic %(i)d" +msgstr "主题 %(i)d" + +msgid "Topic filter details" +msgstr "主题过滤器详情" + +msgid "Topic keywords, one per line, to match against each message." +msgstr "与每封邮件进行匹配的主题关键字，每行写一个。" + +msgid "Topic name:" +msgstr "主题名" + +msgid "" +"Topic specifications require both a name and\n" +" a pattern. Incomplete topics will be ignored." +msgstr "" +"主题的说明需要包含一个名字和一个模式。不完整\n" +" 的主题将被忽略。" + +msgid "Topics" +msgstr "主题" + #. Resource IDs: (7, 244) msgid "TortoiseBlame" msgstr "TortoiseBlame" @@ -37843,6 +44951,9 @@ msgstr "试图删除属性 “%s”，值为 “%s”，但是其本地取值为 msgid "Trying to use an unsupported feature" msgstr "试图使用不支持的特性" +msgid "Tue" +msgstr "星期二" + #, c-format msgid "Tunnel scheme %s requires environment variable %s to be defined" msgstr "隧道方案 %s 需要设定环境变量 %s" @@ -37851,6 +44962,24 @@ msgstr "隧道方案 %s 需要设定环境变量 %s" msgid "Turkish" msgstr "土耳其语" +msgid "" +"Turn this off only if you plan on subscribing people manually\n" +" and don't want them to know that you did so. This option is most\n" +" useful for transparently migrating lists from some other mailing\n" +" list manager to Mailman." +msgstr "" +"如果你打算手工添加订阅者，但不想让他们知道时，关掉这个功能。\n" +" 当你想将成员从一个其他类型的列表透明地移一个Mailman列表时，\n" +" 这个选项特别有用。" + +msgid "" +"Turn this on if you want password reminders to be sent once\n" +" per month to your members. Note that members may disable their\n" +" own individual password reminders." +msgstr "" +"如果你想向你的成员每月发送一次密码提示，启动这项功能。\n" +" 注意成员可能仅用他们各自的密码提示功能。" + #. Resource IDs: (10) msgid "Tweak TortoiseSVN" msgstr "调整 TortoiseSVN 设置" @@ -37893,6 +45022,9 @@ msgstr "键入 SGML 文档" msgid "Typing an XML Document" msgstr "键入 XML 文档" +msgid "U" +msgstr "U" + #. (tag) msgid "ULink" msgstr "ULink" @@ -38002,10 +45134,16 @@ msgstr "UUID 标识: %s\n" msgid "UUID of source repository (%s) does not match expected UUID (%s)" msgstr "源版本库的UUID(%s)与期望的UUID(%s)不匹配" +msgid "Ukrainian" +msgstr "乌克兰语" + #. (surname) msgid "Ullman" msgstr "Ullman" +msgid "Umbrella list settings" +msgstr "保护列表设置" + #, c-format msgid "Unable to check path existence for '%s'" msgstr "无法检查路径“%s”是否存在" @@ -38118,6 +45256,9 @@ msgstr "无法写入 %1, 它可能被设为只读或另有人打开。" msgid "Uncategorized information in address" msgstr "在地址中没有分类的信息" +msgid "Uncaught bounce notification" +msgstr "未捕获的退信通知" + #. Resource IDs: (3887) msgid "Uncheck" msgstr "取消选中" @@ -38243,6 +45384,9 @@ msgstr "测量的单位" msgid "Universal Resource Identifiers in WWW." msgstr "WWW 中的通用资源标识符。" +msgid "Unix-From line changed: %(lineno)d" +msgstr "Unix-From行被改变： %(lineno)d" + msgid "Unknown FS type" msgstr "未知的FS类型" @@ -38291,6 +45435,12 @@ msgstr "“%s” 有未知的条目类型" msgid "Unknown hostname '%s'" msgstr "未知的主机“%s”" +msgid "Unknown language: %(lang)s" +msgstr "未知的语言: %(lang)s" + +msgid "Unknown list: %(listname)s" +msgstr "未知的列表： %(listname)s" + #, c-format msgid "Unknown node kind for '%s'" msgstr "“%s” 是未知的节点类型" @@ -38329,6 +45479,9 @@ msgstr "未知的 svn 协议命令" msgid "Unknown svn_node_kind" msgstr "未知的 svn_node_kind" +msgid "Unknown virtual host: %(safehostname)s" +msgstr "未知的虚拟主机: %(safehostname)s " + #. (para) msgid "Unlike the other info elements, classsynopsisinfo is not a container for meta-information. Instead classsynopsisinfo is a verbatim environment for adding additional information to a class synopsis." msgstr "不像其它的信息元素，classsynopsisinfo 不是一个元信息的容器。classsynopsisinfo 的替代品是一个用于添加附加信息到类提纲中的逐字环境。" @@ -38340,6 +45493,19 @@ msgstr "不像其它的 info 元素，funcsynopsisinfo 不是一个 msgid "Unlock" msgstr "解锁" +msgid "" +"Unlock a locked list, but do not implicitly Save() it.\n" +"\n" +" This does not get run if the interpreter exits because of a signal, or if\n" +" os._exit() is called. It will get called if an exception occurs though.\n" +" " +msgstr "" +"解锁一个被锁住的列表，但是并不对其执行Save()。\n" +"\n" +" 如果解释器因为接收到一个信号而退出，或者os._exit()被调用，这将不会被执行。\n" +" 但是当发生异常时，将会被调用。\n" +" " + #. Resource IDs: (264) msgid "Unlock failed" msgstr "解除锁定失败" @@ -38372,6 +45538,9 @@ msgstr "" msgid "Unlocked" msgstr "已解除锁定" +msgid "Unlocking (but not saving) list: %(listname)s" +msgstr "解锁(但不保存)列表： %(listname)s" + msgid "Unmergeable scheduling requested on an entry" msgstr "条目有无法合并的调度" @@ -38437,6 +45606,27 @@ msgstr "无法识别的流数据" msgid "Unspecified error message" msgstr "未指明的错误信息" +msgid "Unsubscribe" +msgstr "取消订阅" + +msgid "Unsubscribe or edit options" +msgstr "退订或编辑选项" + +msgid "Unsubscription Requests" +msgstr "取消订阅的请求" + +msgid "Unsubscription request" +msgstr "退订请求" + +msgid "Unsubscription request confirmed" +msgstr "取消订阅通过了验证" + +msgid "Unsubscription request succeeded." +msgstr "取消订阅成功" + +msgid "Unsubscription results" +msgstr "退订结果" + msgid "Unsupported FS format" msgstr "不支持的文件系统格式" @@ -38633,24 +45823,51 @@ msgstr "更新工作副本至当前的版本" msgid "Updating %s" msgstr "正在更新 %s" +msgid "Updating HTML for article %(seq)s" +msgstr "为文章 %(seq)s 更新HTML" + +msgid "Updating Mailman 2.0 pending_subscriptions.db database" +msgstr "正在升级 Mailman 2.0 pending_subscriptions.db 数据库" + +msgid "Updating Mailman 2.1.4 pending.pck database" +msgstr "正在升级 Mailman 2.1.4 pending.pck 数据库" + +msgid "Updating Usenet watermarks" +msgstr "正在升级新闻组水印" + #. Resource IDs: (283) msgid "Updating and retrying the lock..." msgstr "更新并重新锁定..." +msgid "Updating index files for archive [%(archive)s]" +msgstr "为归档 [%(archive)s] 更新索引文件" + #. Resource IDs: (199) msgid "Updating log cache" msgstr "正在更新日志缓存" +msgid "Updating mailing list: %(listname)s" +msgstr "正在升级邮件列表: %(listname)s" + +msgid "Updating the held requests database." +msgstr "升级持有请求的数据库" + msgid "Upgrade of this repository is not supported; consider dumping and loading the data elsewhere" msgstr "不支持升级此版本库；请考虑使用导出后加载数据的升级方案" msgid "Upgrade of this repository's underlying versioned filesystem is not supported; consider dumping and loading the data elsewhere" msgstr "文件系统不支持升级此版本库；请考虑使用导出后加载数据的升级方案" +msgid "Upgrading from version %(hexlversion)s to %(hextversion)s" +msgstr "正在升级,从版本%(hexlversion)s 到 %(hextversion)s" + #. (city) msgid "Upper Saddle River" msgstr "Upper Saddle River" +msgid "Usage:" +msgstr "用法：" + #. Resource IDs: (1296) msgid "Use \"_svn\" instead of \".svn\" directories" msgstr "使用“_svn”目录替代“.svn”目录" @@ -38820,6 +46037,67 @@ msgstr "使用整个文件(&W)" msgid "Use this if the URL of the repository has changed" msgstr "版本库的 URL 修改时可使用此功能修改" +msgid "" +"Use this option to prohibit posts according to specific\n" +" header values. The target value is a regular-expression for\n" +" matching against the specified header. The match is done\n" +" disregarding letter case. Lines beginning with '#' are ignored\n" +" as comments.\n" +"\n" +"

    For example:

    to: .*@public.com
    says to hold all\n" +" postings with a To: mail header containing '@public.com'\n" +" anywhere among the addresses.\n" +"\n" +"

    Note that leading whitespace is trimmed from the regexp. This\n" +" can be circumvented in a number of ways, e.g. by escaping or\n" +" bracketing it." +msgstr "" +"使用此选现来根据特定的头部值禁止垃圾邮件。目标值是一个\n" +" 用来与指定头部进行匹配的正则表达式。匹配以大小写无关的形式进行。\n" +" 以'#'开头的行将被作为注释而忽略。\n" +"\n" +"

    例如：

    to: .*@public.com
    是说要延缓邮件头To:\n" +" 中包含'@public.com'的所有信件。\n" +"\n" +"

    注意，开头的空格将被从正则表达式中清除。可以通过许多方法绕开此\n" +" 限制，例如转义或者用括号把空白括起来。" + +msgid "" +"Use this option to remove each message attachment that\n" +" matches one of these content types. Each line should contain a\n" +" string naming a MIME type/subtype,\n" +" e.g. image/gif. Leave off the subtype to remove all\n" +" parts with a matching major content type, e.g. image.\n" +"\n" +"

    Blank lines are ignored.\n" +"\n" +"

    See also pass_mime_types for a content type whitelist." +msgstr "" +"使用这个选项来移除以下类型的附件. 每行应包含一个MIME \n" +" 类型/子类型的名字, 例如 image/gif. 若省略子\n" +" 类型, 则将移除所有匹配主类型的附件, 比如 image.\n" +"\n" +"

    空行会被忽略.\n" +"\n" +"

    参见 pass_mime_types, 那里有安全附件类型的列表." + +msgid "" +"Use this option to remove each message attachment that does\n" +" not have a matching content type. Requirements and formats are\n" +" exactly like filter_mime_types.\n" +"\n" +"

    Note: if you add entries to this list but don't add\n" +" multipart to this list, any messages with attachments\n" +" will be rejected by the pass filter." +msgstr "" +"使用此项来移除内容类型不匹配的附件. 要求和格式跟 过滤MIME类型.\n" +"\n" +"

    注意: 如果你向此清单增加了项目但没有同时增加\n" +" multipart, 所有带附件的消息都将被过滤掉" + #. Resource IDs: (251) msgid "Use whole other &file" msgstr "使用其它文件(&F)" @@ -38832,6 +46110,12 @@ msgstr "用户 %s 不是路径“%s”的锁的所有者(当前由用户 %s 锁 msgid "User '%s' is trying to use a lock owned by '%s' in filesystem '%s'" msgstr "用户 “%s” 试图使用属于 “%s” 的锁，其文件系统是 “%s”" +msgid "User `%(addr)s' removed from list: %(listname)s." +msgstr "用户 %(addr)s 已从列表: %(listname)s中删除。" + +msgid "User address/name" +msgstr "用户 地址/姓名" + #. Resource IDs: (74) msgid "User cancelled" msgstr "用户操作已取消" @@ -38840,6 +46124,9 @@ msgstr "用户操作已取消" msgid "User interfaces" msgstr "用户接口" +msgid "User specific options page" +msgstr "用户定制的选项页面" + #. (tag) msgid "UserInput" msgstr "UserInput" @@ -38862,6 +46149,9 @@ msgstr "使用 XSL 出版 DocBook 文档" msgid "Using Jade and DSSSL to Publish DocBook Documents" msgstr "使用 Jade 和 DSSSL 出版 DocBook 文档" +msgid "Using Mailman version:" +msgstr "正在使用的Mailman版本:" + #. (title) msgid "Using XSL tools to publish DocBook documents" msgstr "使用 XSL 工具出版 DocBook 文档。" @@ -38991,6 +46281,9 @@ msgstr "Vertical Span" msgid "View" msgstr "查看" +msgid "View or edit the list configuration information." +msgstr "查看或编辑列表的配置信息." + #. Resource IDs: (114) msgid "View revision for path in &webviewer" msgstr "在 &Web 浏览器中查看路径的版本" @@ -38999,6 +46292,9 @@ msgstr "在 &Web 浏览器中查看路径的版本" msgid "View revision in &webviewer" msgstr "在 &Web 浏览器中查看版本" +msgid "View this page in" +msgstr "在此查看页面" + #. (entry) msgid "Viewport area" msgstr "视口区域" @@ -39007,10 +46303,22 @@ msgstr "视口区域" msgid "Viewport area dimensions expressed as a percentage are a percentage of the available area. For example, a width of 50% when an implementation is rendering in a column 6in wide is equivalent to specifying a width of 3in." msgstr "视口区域维度表示成的一个百分比是可用区域的百分比。例如，当实现是呈现在一个六英寸宽的列中时的50% 的宽度相当于指定了三英寸的宽度。" +msgid "Visit Subscriber List" +msgstr "访问订阅者列表" + +msgid "Visit Subscriber list" +msgstr "访问订阅者列表" + #. Resource IDs: (1084) msgid "Visit our website" msgstr "浏览我们的网站" +msgid "Visit the list's admin page" +msgstr "访问列表管理页面" + +msgid "Visit the list's info page" +msgstr "访问列表信息页面" + #. (para) msgid "Volume numbers need not be strictly numerical; volume l frequently held manual pages for local additions to the system, and the X Window System manual pages had an x in the volume number: for example, 1x." msgstr "卷号不需要是严格的数字，卷 l 通常为系统的局部添加保存手册页，并且 X Windows 系统手册而有一个 x 在卷号中：例如，1x。" @@ -39023,6 +46331,9 @@ msgstr "W3C" msgid "W3C Encoding rules for dates and times—a profile based on ISO 8601" msgstr "用于日期和时间的 W3C 编码规则，是一个基于 ISO 8601 的外观" +msgid "WARNING: Ignoring duplicate pending ID: %(id)s." +msgstr "警告: 忽略多重的未处理ID: %(id)s" + #, c-format msgid "" "WARNING: Referencing data in revision %ld, which is older than the oldest\n" @@ -39033,6 +46344,12 @@ msgstr "" "警告: 装载这个转存到空的版本库会失败。\n" "\n" +msgid "WARNING: could not acquire lock for list: %(listname)s" +msgstr "警告: 不能获得列表 %(listname)s 的锁" + +msgid "WARNING: directory does not exist: %(d)s" +msgstr "警告：目录不存在： %(d)s" + #. Resource IDs: (198) msgid "Wait" msgstr "等待" @@ -39057,6 +46374,15 @@ msgstr "警告" msgid "Warning!" msgstr "警告！" +msgid "Warning! You may encounter permission problems." +msgstr "警告！您可能会遇到权限问题。" + +msgid "Warning: " +msgstr "警告：" + +msgid "Warning: couldn't remove %(src)s -- %(rest)s" +msgstr "警告: 无法删除 %(src)s -- %(rest)s" + #. (phrase) msgid "Wat Arun" msgstr "Wat Arun" @@ -39085,6 +46411,30 @@ msgstr "我们希望能权威的回答你关于 DocBook 所有元素和属性的 msgid "We hope to answer, definitively, all the questions you might have about all the elements and entities in DocBook. In particular, we cover the following subjects:" msgstr "我们希望能回答你关于 DocBook 所有元素和实体的全部常见问题。尤其是如下问题：" +msgid "" +"We're sorry, but you have already been unsubscribed\n" +" from this mailing list. To re-subscribe, please visit the\n" +" list information page." +msgstr "" +"非常抱歉, 但是您已经取消了订阅这个邮件列表.\n" +" 如果您想要重新订阅，请访问\n" +" 列表信息页面." + +msgid "Wed" +msgstr "星期三" + +msgid "Weekly" +msgstr "每周" + +msgid "Welcome email text file" +msgstr "邮件的欢迎文本信息" + +msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s" +msgstr "欢迎加入\"%(realname)s\"的邮件列表 %(digmode)s" + +msgid "Welcome!" +msgstr "欢迎！" + #. (title) msgid "What are the shortcomings to structural authoring?" msgstr "结构化创作的缺点是什么？" @@ -39101,6 +46451,9 @@ msgstr "你做了什么版面调整，想要得到什么输出？" msgid "What formatting that you applied do you require your interchange partner to apply? For example, where and how must text be generated in order for the documents to make sense?" msgstr "你要求你的交换伙伴使用的你提供的格式是什么样的？例如，为了文档有意义必须在何处和怎样生成文本。" +msgid "What steps are required for subscription?
    " +msgstr "订阅需要那些步骤？
    " + #. (para) msgid "What values did you give to the label attribute and how are they to be interpreted for rendering?" msgstr "你给 label 赋了什么值？展现时如何解释它们？" @@ -39125,10 +46478,146 @@ msgstr "CD-ROM 中都有什么？" msgid "What's on theCD-ROM?" msgstr "CD-ROM 中都有什么？" +msgid "" +"When \"umbrella_list\" is set to indicate that this list has\n" +" other mailing lists as members, then administrative notices like\n" +" confirmations and password reminders need to not be sent to the\n" +" member list addresses, but rather to the owner of those member\n" +" lists. In that case, the value of this setting is appended to\n" +" the member's account name for such notices. `-owner' is the\n" +" typical choice. This setting has no effect when \"umbrella_list\"\n" +" is \"No\"." +msgstr "" +"当\"umbrella_list\"被的设置指示该列表有其它邮件列表作为成员时，\n" +" 像确认和管理通知这样的管理通知不被发送到成员地址，\n" +" 而是发送到这些成员列表的拥有者。这种情况下，这个\n" +" 设置的值被添加到成员账户明后来作为接收这些通知的\n" +" 地址。`-owner'是典型的选择。当\"umbrella_list\"\n" +" 被设置为\"无\"时，该设置无效。" + +msgid "" +"When personalization is enabled\n" +"for this list, additional substitution variables are allowed in your headers\n" +"and footers:\n" +"\n" +"

    • user_address - The address of the user,\n" +" coerced to lower case.\n" +"
    • user_delivered_to - The case-preserved address\n" +" that the user is subscribed with.\n" +"
    • user_password - The user's password.\n" +"
    • user_name - The user's full name.\n" +"
    • user_optionsurl - The url to the user's option\n" +" page.\n" +"
    \n" +msgstr "" +"当列表启用个性化设置(personalization)时，\n" +" 在邮件头部和尾部以下额外替换变量可用：\n" +"\n" +"
    • user_address - 用户地址，转化为小写字母。\n" +"
    • user_delivered_to - 用户订阅列表时使用的大小写相关的地址.\n" +"
    • user_password - 用户口令。\n" +"
    • user_name - 用户全名。\n" +"
    • user_optionsurl - 用户选项页的URL地址.\n" +"
    \n" + #. (para) msgid "When Emacs is running under X Windows, the borderWidth resource controls the width of the external border." msgstr "When Emacs is running under X Windows, the borderWidth resource controls the width of the external border." +msgid "" +"When a message is posted to the list, a series of\n" +" moderation steps are take to decide whether the a moderator must\n" +" first approve the message or not. This section contains the\n" +" controls for moderation of both member and non-member postings.\n" +"\n" +"

    Member postings are held for moderation if their\n" +" moderation flag is turned on. You can control whether\n" +" member postings are moderated by default or not.\n" +"\n" +"

    Non-member postings can be automatically\n" +" accepted,\n" +" held for\n" +" moderation,\n" +" rejected (bounced), or\n" +" discarded,\n" +" either individually or as a group. Any\n" +" posting from a non-member who is not explicitly accepted,\n" +" rejected, or discarded, will have their posting filtered by the\n" +" general\n" +" non-member rules.\n" +"\n" +"

    In the text boxes below, add one address per line; start the\n" +" line with a ^ character to designate a Python regular expression. When entering backslashes, do so\n" +" as if you were using Python raw strings (i.e. you generally just\n" +" use a single backslash).\n" +"\n" +"

    Note that non-regexp matches are always done first." +msgstr "" +"当一封邮件被发送到列表时，要执行一系列的步骤以确定列\n" +" 表主持者是否必须首先对此信件进行审查。本小节包含对成员或非成员信\n" +" 件的控制选项。\n" +"\n" +"

    如果列表成员的节制标志被打开，那么他的信件都将被暂存以待\n" +" 审核。您可以控制成员信件默认情况下是否被暂存。\n" +"\n" +"

    非成员的信件可以单独的或成组的被自动\n" +" 接受，\n" +" 暂存以\n" +" 待审核，\n" +" 拒绝(被退回)，或者\n" +" 丢弃。\n" +" 任何没有明确指明接受，退回，或者丢弃的非成员信件都将被\n" +" 非成\n" +" 员通用规则所过滤。\n" +"\n" +"

    下面的文本框中，每行只能添加一个地址。行首的字符 ^ 说明后面的是\n" +" 一个Python正则表达式。反斜线请按照Python原始字符串的形式输入(也就是\n" +" 说您只需要输入一个反斜线就可以了)。\n" +"\n" +"

    请注意，总是先做非正则表达式匹配。" + +msgid "" +"When a new digest volume is started, the volume number is\n" +" incremented and the issue number is reset to 1." +msgstr "" +"当一册新的摘要开始时，册号增加\n" +" 发行号被重置为1。" + +msgid "" +"When a new member is subscribed to this list, their initial\n" +" set of options is taken from the this variable's setting." +msgstr "当新成员订阅此列表时，他们选项的初始设定从这个变量的设定获得。" + +msgid "" +"When a post from a non-member is received, the message's\n" +" sender is matched against the list of explicitly\n" +" accepted,\n" +" held,\n" +" rejected (bounced), and\n" +" discarded addresses. If no match is found, then this action\n" +" is taken." +msgstr "" +"当接收到非成员发送的信件时，发信者地址将与被显式指定为\n" +" 接受，\n" +" 暂存，\n" +" 拒绝(退信)，或者\n" +" 丢弃的地址进行比较。如果没有匹配，那么将执行此动作。" + #. Resource IDs: (197) msgid "When enabled, the versioned items listed in the commit dialog are automatically selected" msgstr "启用时，在提交对话框中列出的受版本控制的项目会被自动选择" @@ -39139,14 +46628,43 @@ msgid "" "asking for a descriptive message about the locking" msgstr "当锁定一个或多个文件时，显示对话框询问锁定的描述消息" +msgid "" +"When members want to leave a list, they will make an\n" +" unsubscription request, either via the web or via email.\n" +" Normally it is best for you to allow open unsubscriptions so that\n" +" users can easily remove themselves from mailing lists (they get\n" +" really upset if they can't get off lists!).\n" +"\n" +"

    For some lists though, you may want to impose moderator\n" +" approval before an unsubscription request is processed. Examples\n" +" of such lists include a corporate mailing list that all employees\n" +" are required to be members of." +msgstr "" +"当成员想要离开列表时，他们会通过web或者email发送一个\n" +" 退订请求。一般来说，您最好允许列表成员能够自由的退订列表，这样他\n" +" 们就能够容易地把自己从邮件列表中移除(如果他们不能离开列表的话，会\n" +" 觉得很烦)\n" +"\n" +"

    但是对某些列表，您可能希望在一个退订请求被执行之前需要经过列表\n" +" 主持人核准。这种列表的例子包括公司的邮件列表，所有的雇员都要求是\n" +" 列表的成员。" + #. (para) msgid "When present, this attribute specifies the offset to the first occurrence of the alignment character on each line. If a line doesn't include the alignment character, it should be horizontally shifted to end at the alignment position. When charoff is used to set the offset of an alignment character, the direction of offset is determined by the current text direction (set by the dir attribute). In left-to-right texts (the default), offset is from the left margin. In right-to-left texts, offset is from the right margin. User agents are not required to support this attribute." msgstr "当呈现时，这个属性指定第一个在每一行中的对齐字符出现的偏移量。如果一行没有包括对齐字符，它将水平移动到对齐位置的结尾。当 charoff 用于设置对齐字符的偏移量时，偏移的方向由当前文本方向决定(由 dir 属性设置)。对于从左到右的文本(默认)，偏移从左空白开始。在从右到左的文本中，偏移从右空白开始。用户代理不必须支持这个属性。" +msgid "When receiving digests, which format is default?" +msgstr "当受到摘要时，默认的格式是什么？" + #. (para) msgid "When rendered online, it is natural to make the content of the link element an active link. When rendered in print media, the URI might be ignored, printed after the text of the link, or printed as a footnote." msgstr "当在线呈现时，它实际是制造 link 元素的内容为一个活动链接。当呈现在打印媒体中时，URI 可能被忽略，打印在链接文本的后面或打印成一个脚注。" +msgid "" +"When set, the list of subscribers is protected by member or\n" +" admin password authentication." +msgstr "若设置此项，则已订阅成员清单将受成员口令或管理员口令的保护。" + msgid "When specifying working copy paths, only one target may be given" msgstr "当指定工作副本路径时，只能给出一个目标" @@ -39154,10 +46672,57 @@ msgstr "当指定工作副本路径时，只能给出一个目标" msgid "When the content of the link element is empty, the content of the xlink:href attribute should be rendered as the text of the link." msgstr "当 link 元素的内容为空时，xlink:href 属性的内容将被呈现为链接的文本。" +msgid "" +"When this option is enabled, all list traffic is emergency\n" +" moderated, i.e. held for moderation. Turn this option on when\n" +" your list is experiencing a flamewar and you want a cooling off\n" +" period." +msgstr "" +"当打开此选项时，列表中所有邮件都被紧急延缓。也就是都被暂时保存起来而不立即发送。\n" +"\t\t\t\t当你的列表邮件量不正常增多而你想要让此增长趋于缓和时打开此选项。" + +msgid "When you are done making changes..." +msgstr "当您正要完成更改时..." + +msgid "" +"When you scrub attachments, they are stored in archive\n" +" area and links are made in the message so that the member can\n" +" access via web browser. If you want the attachments totally\n" +" disappear, you can use content filter options." +msgstr "" +"当你使用附件时，附件被放在归档区，邮件中设置链接，这样成员可以通过网页浏览器来访问附件。\n" +" 如果你想使附件完全不出现，可以使用内容过滤选项。" + +msgid "" +"When you tell Mailman to perform a catchup on the newsgroup,\n" +" this means that you want to start gating messages to the mailing\n" +" list with the next new message found. All earlier messages on\n" +" the newsgroup will be ignored. This is as if you were reading\n" +" the newsgroup yourself, and you marked all current messages as\n" +" read. By catching up, your mailing list members will\n" +" not see any of the earlier messages." +msgstr "" +"当你告知Mailman执行一个运行在新闻组上的catchup时，这意味着你\n" +" 想开始向邮件列表连接找到的下一条新信息。所有在新闻组上的之前的\n" +" 信息都将被忽略。这就好像你自己正在阅读新闻组，并且你给所有当前\n" +" 信息标志了读取。通过catchup，你的邮件列表成员将看不到\n" +" 任何之前的信息。" + #. (para) msgid "Whenever possible, our books use RepKover(TM), a durable and flexible lay-flat binding. If the page count exceeds RepKover's limit, perfect binding is used." msgstr "对这本书我们尽可能使用 RepKover(TM)，这是一种灵活耐用的平面装订。如果页数超过了 RepKover 的限制，将会使用无损装订。" +msgid "" +"Where are replies to list messages directed?\n" +" Poster is strongly recommended for most mailing\n" +" lists." +msgstr "" +"列表消息的回复被发送到哪里？\n" +" 对大多数邮件列表来说，强烈推荐使用发布者。" + +msgid "Which delivery mode is the default for new users?" +msgstr "向用户邮递时的默认方式是什么？" + #. (para) msgid "Whichever processing model you choose, note that this will be an interchange issue if you share documents with other users (see )." msgstr "对于你选择的任何一个处理模型，注意，如果你与其它用户共享文档的话，这将是一个交换的发布。" @@ -39166,6 +46731,42 @@ msgstr "对于你选择的任何一个处理模型，注意，如果你与其它 msgid "While bibliographys are usually limited to component or section boundaries, appearing at the end of a book or chapter, for instance, bibliolists can appear anywhere that the other list types are allowed." msgstr "虽然 bibliography 通常限于组件或节的边界，但也出现在 book 或 chapter 的结尾，例如，bibliolist 可以出现在允许其它列表的任何地方。" +msgid "" +"While Mailman's bounce detector is fairly robust, it's\n" +" impossible to detect every bounce format in the world. You\n" +" should keep this variable set to Yes for two reasons: 1)\n" +" If this really is a permanent bounce from one of your members,\n" +" you should probably manually remove them from your list, and 2)\n" +" you might want to send the message on to the Mailman developers\n" +" so that this new format can be added to its known set.\n" +"\n" +"

    If you really can't be bothered, then set this variable to\n" +" No and all non-detected bounces will be discarded\n" +" without further processing.\n" +"\n" +"

    Note: This setting will also affect all messages sent\n" +" to your list's -admin address. This address is deprecated and\n" +" should never be used, but some people may still send mail to this\n" +" address. If this happens, and this variable is set to\n" +" No those messages too will get discarded. You may want\n" +" to set up an\n" +" autoresponse\n" +" message for email to the -owner and -admin address." +msgstr "" +"虽然Mainman的退信检测器相当强大, 它仍不可能检测世界上\n" +" 所有的退信格式. 鉴于如下两点理由, 你应该将这个变量设为是:\n" +" 1) 如果这真的是来自某成员的永久性退信, 你应该手工移除这个成员, 而且\n" +" 2)你可能想要向Mailman的开发者发一封邮件, 以便这种新的格式被添加到\n" +" 已知格式集合中去. \n" +"\n" +"

    如果您真的不希望被打扰, 那么把这个变量设置成否, 这样这\n" +" 样没有被正确检测的退信就直接被忽略, 而不会进行任何进一步的处理. \n" +"\n" +"

    注意: 这个设置同样会影响发向您的列表的管理地址的消息. \n" +" 这个地址是不被推荐的而且不应该收到任何消息但仍然可能有人给这个地址\n" +" 发信一旦这种情况发生了, 同时这个变量被设置成否, 那么那些消息就被\n" +" 忽略. 你可可能希望给列表的所有者地址和管理地址设置一个 自动 回复消息." + #, c-format msgid "While preparing '%s' for commit" msgstr "当为提交操作准备“%s”时" @@ -39174,6 +46775,9 @@ msgstr "当为提交操作准备“%s”时" msgid "Whitespace must be preserved." msgstr "空白必须被保留。" +msgid "Who can view subscription list?" +msgstr "谁可以查看已订阅成员清单？" + #. (title) msgid "Why Read This Book?" msgstr "为什么要阅读本书？" @@ -39347,6 +46951,9 @@ msgstr "XSL 处理模型" msgid "Xhosa" msgstr "班图语" +msgid "Yearly" +msgstr "每年" + #. Resource IDs: (73) msgid "Yes" msgstr "是" @@ -39355,10 +46962,28 @@ msgstr "是" msgid "Yes to all" msgstr "全部选是" +msgid "Yes, w/discard" +msgstr "是的,放弃" + +msgid "Yes, w/forward" +msgstr "是的,继续" + #. Resource IDs: (201) msgid "You already have the latest version installed." msgstr "你已经安装了最新版。" +msgid "You are already a member of this mailing list!" +msgstr "您已经是这个邮件列表的成员了!" + +msgid "You are already subscribed!" +msgstr "您已经订阅了!" + +msgid "You are already subscribed." +msgstr "您已经订阅过了。" + +msgid "You are already using that email address" +msgstr "您已经使用了那个邮件地址" + #. Resource IDs: (144) msgid "" "You are creating a repository on a network share.\n" @@ -39371,6 +46996,34 @@ msgstr "" "通过 file:/// 存取网络磁盘驱动器上的版本库可能造成数据损坏！\n" "要创建版本库吗？" +msgid "You are forbidden from posting messages to this list." +msgstr "您被禁止往该列表发送信息。" + +msgid "You are not a member of the %(listname)s mailing list" +msgstr "您不是邮件列表 %(listname)s 的成员" + +msgid "" +"You are not allowed to post to this mailing list, and your message has been\n" +"automatically rejected. If you think that your messages are being rejected in\n" +"error, contact the mailing list owner at %(listowner)s." +msgstr "" +"您没有发送信件至该邮件列表的权限，您的信息被自动拒绝。\n" +"如果您认为你的信件被错误拒绝，请联系 %(listowner)s 中的邮件列表的所有者 " + +msgid "You are not allowed to retrieve the list membership." +msgstr "您没资格查看邮件列表的成员。" + +msgid "You are not authorized to create new mailing lists" +msgstr "您没有创建新邮件列表的权限" + +msgid "You are not authorized to delete this mailing list" +msgstr "您没有删除此邮件列表的授权" + +msgid "" +"You are not currently a member. Have you already unsubscribed or changed\n" +"your email address?" +msgstr "您还不是列表的成员。您是否已经退订了列表，或者修改了您的邮件地址？" + #. Resource IDs: (88) msgid "" "You are trying to access a repository via file:/// on\n" @@ -39393,10 +47046,53 @@ msgstr "" "你真的确认你要移动 trunk\n" "文件夹吗？" +msgid "You can access your personal options via the following url:" +msgstr "您可以通过下面的url访问您的个人选项：" + #. (para) msgid "You can also get this book in electronic form, as a DocBook document, and in HTML from this book's web site: http://docbook.org/." msgstr "如果你想获得本书的电子格式，作为 DocBook 文档，它的 HTML 格式可以在本书的站点 http://docbook.org/ 下载。" +msgid "" +"You can create a new mailing list by entering the\n" +" relevant information into the form below. The name of the mailing list\n" +" will be used as the primary address for posting messages to the list, so\n" +" it should be lowercased. You will not be able to change this once the\n" +" list is created.\n" +"\n" +"

    You also need to enter the email address of the initial list owner.\n" +" Once the list is created, the list owner will be given notification, along\n" +" with the initial list password. The list owner will then be able to\n" +" modify the password and add or remove additional list owners.\n" +"\n" +"

    If you want Mailman to automatically generate the initial list admin\n" +" password, click on `Yes' in the autogenerate field below, and leave the\n" +" initial list password fields empty.\n" +"\n" +"

    You must have the proper authorization to create new mailing lists.\n" +" Each site should have a list creator's password, which you can\n" +" enter in the field at the bottom. Note that the site administrator's\n" +" password can also be used for authentication.\n" +" " +msgstr "" +"在下面的表格中填入相关的信息,您就可以创建新的邮件列表了.\n" +" 邮件列表的名称将用作向这个列表发送信息的主要地址,\n" +" 它应该小写.\n" +" 但列表创建之后,您不能对其进行修改.\n" +"\n" +"

    您还需要输入初始的列表拥有者的邮件地址.\n" +" 当列表被创建后,列表的拥有者将收到通知和初始的列表密码.\n" +" 列表的拥有者能够修改密码,以及添加或删除附加的列表拥有者. \n" +"\n" +"

    如果您想要让 Mailman 自动生成初始的列表管理密码,在下面的自动生成域点击'是',\n" +" 并将初始列表密码置为空.\n" +"\n" +"

    为了创建新的邮件列表,您需要适当的权限.\n" +" 每个站点应该有一个 列表创建者 的密码,\n" +" 您可以在下面的域中输入这个密码.请注意站点管理员的密码\n" +" 同样可以作为认证信息.\n" +" " + #. (para) msgid "You can exit from GNU Emacs with C-xC-cFilesExit Emacs." msgstr "You can exit from GNU Emacs with C-xC-cFilesExit Emacs." @@ -39431,6 +47127,32 @@ msgstr "" "如果你要为该文件夹中所有文件设置该属性，\n" "你必须选择“递归”选项。" +msgid "" +"You cannot add a Reply-To: to an explicit\n" +" address if that address is blank. Resetting these values." +msgstr "如果一个地址是空的话你不能为它设置Reply-To:头部。 重设这些值。" + +msgid "" +"You cannot enable gatewaying unless both the\n" +" news server field and\n" +" the linked\n" +" newsgroup fields are filled in." +msgstr "" +"除非\n" +" 新闻服务器字段和\n" +" 链接的新闻组域已经被填写，你不能启动网关。" + +msgid "" +"You did not give the correct old password, so your password has not been\n" +"changed. Use the no argument version of the password command to retrieve your\n" +"current password, then try again." +msgstr "" +"您没有提供正确的密码, 所以您的密码没有被改变\n" +"您可以先取回您的密码(不使用参数)，然后再试一次。" + +msgid "You did not give the correct password" +msgstr "您没有输入正确的密码" + #. Resource IDs: (105) msgid "" "You dropped more than one file or folder to add to the repository.\n" @@ -39445,6 +47167,56 @@ msgstr "" "\n" "确定要继续执行该操作吗？" +msgid "You forgot to enter the list name" +msgstr "您忘记了输入列表名称" + +msgid "You forgot to specify the list owner" +msgstr "您忘记了确定列表拥有者" + +msgid "You gave the wrong password" +msgstr "您的密码错误" + +msgid "You have been successfully subscribed to the %(realname)s mailing list." +msgstr "您已经成功地订阅了 %(realname)s 邮件列表。" + +msgid "" +"You have been successfully unsubscribed from the\n" +" mailing list %(fqdn_listname)s. If you were receiving digest\n" +" deliveries you may get one more digest. If you have any questions\n" +" about your unsubscription, please contact the list owners at\n" +" %(owneraddr)s." +msgstr "" +"您已经成功地退订了邮件列表 %(fqdn_listname)s。如果\n" +" 您接收摘要投递的话，您还将收到一封摘要信息。如果您对于退订有任何的\n" +" 问题，请联系列表管理员： %(owneraddr)s。" + +msgid "You have been unsubscribed from the %(realname)s mailing list" +msgstr "您已经退订了 %(realname)s 的邮件列表" + +msgid "" +"You have canceled the re-enabling of your membership. If\n" +" we continue to receive bounces from your address, it could be deleted from\n" +" this mailing list." +msgstr "" +"您已经取消重新设置您的成员资格有效. \n" +" 如果我们持续从你的地址收到退信,你地址将被从列表中删除." + +msgid "You have canceled your change of address request." +msgstr "您已经取消了对地址请求的修改." + +msgid "You have canceled your subscription request." +msgstr "您已经取消了您的订阅请求." + +msgid "You have canceled your unsubscription request." +msgstr "您已经撤消了您取消订阅的请求." + +msgid "" +"You have digest members, but digests are turned\n" +" off. Those people will not receive mail." +msgstr "" +"您有开启摘要模式的会员, 但是摘要模式被关闭。\n" +"这些人将接不到信件" + #. Resource IDs: (16) msgid "" "You have modified properties without saving them first.\n" @@ -39453,10 +47225,48 @@ msgstr "" "你已修改的设置还没有保存。\n" "现在保存吗？" +msgid "" +"You have regular list members but non-digestified mail is\n" +" turned off. They will receive mail until you fix this\n" +" problem." +msgstr "" +"您有开启非摘要模式会员，但是非摘要模式被关闭。 \n" +" 直到您修正上述问题前，非摘要模式会员将持续收到信件。" + +msgid "" +"You have successfully created the mailing list\n" +" %(listname)s and notification has been sent to the list owner\n" +" %(owner)s. You can now:" +msgstr "" +"您已经成功地创建了邮件列表 %(listname)s\n" +" 同时,通知已经发送到给了列表拥有者 %(owner)s.\n" +" 现在您可以:" + +msgid "" +"You have successfully deleted the mailing list\n" +" %(listname)s." +msgstr "" +"您成功地删除了邮件列表\n" +" %(listname)s." + +msgid "You have successfully set your options." +msgstr "您已经成功设置您的选项。" + #. Resource IDs: (251) msgid "You have to update your working copy first." msgstr "你必须先更新工作副本。" +msgid "" +"You have turned off delivery of both digest and\n" +" non-digest messages. This is an incompatible state of\n" +" affairs. You must turn on either digest delivery or\n" +" non-digest delivery or your mailing list will basically be\n" +" unusable." +msgstr "" +"您关闭了摘要与非摘要信息的发送\n" +"这是不兼容状态。您必须从两者之中选择其一，\n" +"不然你的邮件列表基本是无法使用的。" + #. Resource IDs: (169) msgid "" "You haven't entered an issue number!\n" @@ -39465,6 +47275,15 @@ msgstr "" "你尚未输入问题编号！\n" "确定要进行提交吗？" +msgid "" +"You invited %(address)s to your list, but in a\n" +"deliberate malicious attempt, they tried to confirm the invitation to a\n" +"different list. We just thought you'd like to know. No further action by you\n" +"is required." +msgstr "" +"您邀请了 %(address)s 加入您的列表, 但他们恶意\n" +"尝试确认一个加入别的列表的邀请, 我们估计您乐意了解这个情况. 但您不必采取任何行动。" + #. (para) msgid "You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one." msgstr "你可以加入一个最多五个字的段落作为封面文本和一个最多25个字的段落作为封底文本，把它们加入到修改版本的封皮文本列表的末端。一个实体之可以加入 (或通过组织制作) 一段封面或封底文本。如果原文档已经为该封皮(封面或封底)包含了封皮文本，由你或你所代表的实体先前加入或组织的文本，你不能再新加入一个，但你可以在原来的发行者的显示的许可下替换掉原来的那个。" @@ -39493,6 +47312,9 @@ msgstr "你可以以任何媒质拷贝并分发文档，无论是否处于商业 msgid "You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document." msgstr "你可以从一个这样的合集中提取一个单独的文档，并将它在本许可证下单独发布，在你提取出的文档中加入一份本许可证的拷贝，并在文档的其它方面遵循本许可证的逐字地拷贝的原则。" +msgid "You may get one last digest." +msgstr "您可能会收到最后一封摘要。" + #. (para) msgid "You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects." msgstr "你可以制作一个文档和其它文档的合集，在本许可证下发布，并在合集中将不同文档中的多个本许可证的拷贝以一个单独的拷贝来代替，只要你在文档的其它方面遵循本许可证的逐字地拷贝的条款即可。" @@ -39501,13 +47323,36 @@ msgstr "你可以制作一个文档和其它文档的合集，在本许可证下 msgid "You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance." msgstr "除非确实遵从本许可证，你不可以对遵从本许可证发布的文档进行复制、修改、附加许可证或发布。任何其它的试图复制、修改、附加许可、发布本文档的行为都是无效的，并自动终止本许可证所授予你的权利。然而其它从你这里依照本许可证得到的拷贝或权力的人(或组织)得到的的许可证都不会终止，只要他们仍然完全遵照本许可证。" +msgid "You may not subscribe a list to itself!" +msgstr "您不能让一个邮件列表订阅它自身！" + +msgid "" +"You must confirm your unsubscription request by turning\n" +" on the checkbox below the Unsubscribe button. You\n" +" have not been unsubscribed!" +msgstr "" +"为了确认您取消订阅的请求,您必须选中复选框中 取消订阅 \n" +" 这一项. 您还没有取消订阅!" + +msgid "You must fix the preceding invalid addresses first." +msgstr "您必须先修正上述的无效地址." + #. Resource IDs: (196) msgid "You must restart your system for the changes to take effect." msgstr "你必须重新启动操作系统使改变生效。" +msgid "You must specify a list name. Here is the %(link)s" +msgstr "您必须给出一个列表名称. 这里是 %(link)s" + +msgid "You must specify a list." +msgstr "您必须指定一个列表。" + msgid "You must specify exactly one of -d, -i, -t or -X.\n" msgstr "您必须指定 -d, -i, -t 或 -X 中的一个。\n" +msgid "You must supply a valid email address." +msgstr "您必须提供一个有效的电子邮件地址。" + #. (para) msgid "" "You put a singular index marker where the subject it refers to actually occurs in your text: \n" @@ -39536,10 +47381,34 @@ msgstr "" "你选择了无版本控制的文件。\n" "它会在提交之前被加入版本控制。" +msgid "" +"You were not invited to this mailing list. The invitation has been discarded,\n" +"and both list administrators have been alerted." +msgstr "您没有被邀请加入此邮件列表。邀请已被废弃，列表的所有管理员都将收到此警告。" + +msgid "" +"You will be sent email requesting confirmation, to\n" +" prevent others from gratuitously subscribing you." +msgstr "为防止有人无意替您订阅，将有确认函发送给您。" + +msgid "" +"You will be sent email requesting confirmation, to\n" +" prevent others from gratuitously subscribing you. Once\n" +" confirmation is received, your request will be held for approval\n" +" by the list moderator. You will be notified of the moderator's\n" +" decision by email." +msgstr "" +"为防止有人无意替您订阅，将有确认函发送给您。一旦经\n" +" 您确认，您的请求将被暂缓以待列表主持者审核。主持者的决定将通\n" +" 过电子邮件告知你。" + #. (para) msgid "You would change the catalog entry for the general technical character entities to:" msgstr "你将为通用技术字符实体修改编目条目为：" +msgid "You're being a sneaky list owner!" +msgstr "您将成为一个隐蔽的列表属主！" + #. (para) msgid "You're reading a refentry right now." msgstr "你马上将读到一个 refentry。" @@ -39556,6 +47425,19 @@ msgstr "" msgid "Your .svn/tmp directory may be missing or corrupt; run 'svn cleanup' and try again" msgstr "你的 .svn/tmp 目录可能丢失或损坏；请执行“svn cleanup”，然后重试" +msgid "" +"Your %(property)s string appeared to\n" +" have some correctable problems in its new value.\n" +" The fixed value will be used instead. Please\n" +" double check that this is what you intended.\n" +" " +msgstr "" +"你的%(property)s的新值中好像有一些\n" +" 可以更正的问题。\n" +" 将用预备的值代替。请\n" +" 仔细检查这是你想要的结果。\n" +" " + #. (para) msgid "Your catalog in /share/sgml/catalog" msgstr "你的编目在 /share/sgml/catalog 中" @@ -39563,10 +47445,220 @@ msgstr "你的编目在 /share/sgml/catalog 中" msgid "Your commit message was left in a temporary file:" msgstr "您的提交信息保留在临时文件中: " +msgid "" +"Your confirmation is required in order to cancel the\n" +" posting of your message to the mailing list %(listname)s:\n" +"\n" +"

    • Sender: %(sender)s\n" +"
    • Subject: %(subject)s\n" +"
    • Reason: %(reason)s\n" +"
    \n" +"\n" +" Hit the Cancel posting button to discard the posting.\n" +"\n" +"

    Or hit the Continue awaiting approval button to continue to\n" +" allow the list moderator to approve or reject the message." +msgstr "" +"为了取消向邮件列表%(listname)s发送信件,您需要通过验证.\n" +"\n" +"

    • 发送者: %(sender)s\n" +"
    • 主题: %(subject)s\n" +"
    • 原因: %(reason)s\n" +"
    \n" +"\n" +" 点击 取消发送按钮来取消发送.\n" +"\n" +"

    或者点击 继续等待批准 按钮,继续允许列表主持者批准或者拒绝信件." + +msgid "" +"Your confirmation is required in order to complete the\n" +" change of address request for the mailing list %(listname)s. You\n" +" are currently subscribed with\n" +"\n" +"

    • Real name: %(fullname)s\n" +"
    • Old email address: %(oldaddr)s\n" +"
    \n" +"\n" +" and you have requested to %(globallys)s change your email address to\n" +"\n" +"
    • New email address: %(newaddr)s\n" +"
    \n" +"\n" +" Hit the Change address button below to complete the confirmation\n" +" process.\n" +"\n" +"

    Or hit Cancel and discard to cancel this change of address\n" +" request." +msgstr "" +"为了完成对邮件列表 %(listname)s 的地址请求的修改,\n" +" 您必须通过验证. 您的订阅身份是:\n" +"\n" +"

    • 真实姓名: %(fullname)s\n" +"
    • 旧的邮件地址: %(oldaddr)s\n" +"
    \n" +"\n" +" 您已经请求 %(globallys)s 更改您的邮件地址为\n" +"\n" +"
    • 新的邮件地址: %(newaddr)s\n" +"
    \n" +"\n" +" 点击下面的 更改地址来完成验证过程\n" +"\n" +"

    或者点击 取消并且删除 来取消对地址的更改请求." + +msgid "" +"Your confirmation is required in order to complete the\n" +" subscription request to the mailing list %(listname)s. Your\n" +" subscription settings are shown below; make any necessary changes and hit\n" +" Subscribe to complete the confirmation process. Once you've\n" +" confirmed your subscription request, you will be shown your account\n" +" options page which you can use to further customize your membership\n" +" options.\n" +"\n" +"

    Note: your password will be emailed to you once your subscription is\n" +" confirmed. You can change it by visiting your personal options page.\n" +"\n" +"

    Or hit Cancel my subscription request if you no longer want to\n" +" subscribe to this list." +msgstr "" +"为了完成对邮件列表%(listname)s的订阅请求,您必须完成验证.您的订阅设置如下;\n" +" 可以做任何任何必要的修改,然后点击订阅完成验证.\n" +" 一旦您完成了订阅请求的验证,您将看到您的帐户的选项页,您可以通过它进一步\n" +" 定制您的成员选项.\n" +"\n" +"

    注意: 如果您的订阅完成了验证,您的密码会发送到您的邮箱里.您可以\n" +" 通过访问您的个人选项页修改它.\n" +"\n" +"

    或者,如果您不想订阅这个列表，可以点击取消我的订阅请求 " + +msgid "" +"Your confirmation is required in order to complete the\n" +" unsubscription request from the mailing list %(listname)s. You\n" +" are currently subscribed with\n" +"\n" +"

    • Real name: %(fullname)s\n" +"
    • Email address: %(addr)s\n" +"
    \n" +"\n" +" Hit the Unsubscribe button below to complete the confirmation\n" +" process.\n" +"\n" +"

    Or hit Cancel and discard to cancel this unsubscription\n" +" request." +msgstr "" +"为了完成对 %(listname)s 的取消订阅请求,您必须确认.\n" +" 当前,您订阅的身份是:\n" +"\n" +"

    • 真实姓名: %(fullname)s\n" +"
    • 邮件地址: %(addr)s\n" +"
    \n" +"\n" +" 点击下面的 取消订阅 按钮，来完成确认.\n" +"\n" +"

    或者点击 取消并且删除 来撤销您的取消订阅请求." + +msgid "" +"Your confirmation is required in order to continue with\n" +" the subscription request to the mailing list %(listname)s.\n" +" Your subscription settings are shown below; make any necessary changes\n" +" and hit Subscribe to list ... to complete the confirmation\n" +" process. Once you've confirmed your subscription request, the\n" +" moderator must approve or reject your membership request. You will\n" +" receive notice of their decision.\n" +"\n" +"

    Note: your password will be emailed to you once your subscription\n" +" is confirmed. You can change it by visiting your personal options\n" +" page.\n" +"\n" +"

    Or, if you've changed your mind and do not want to subscribe to\n" +" this mailing list, you can hit Cancel my subscription\n" +" request." +msgstr "" +"为了继续对邮件列表%(listname)s的订阅请求,您必须完成验证.您的订阅设置如下;\n" +" 你可以做任何必要的修改,然后点击订阅这个列表...完成验证.\n" +" 一旦您完成了订阅请求的验证,列表主持者会批准或者拒绝您的成员请求,您将收到他(们)\n" +" 决定结果。\n" +"\n" +"

    注意: 如果您的订阅完成了验证,您的密码会发送到您的邮箱里.您可以\n" +" 通过访问您的个人选项页修改它.\n" +"\n" +"

    或者,如果您改变了主意，不想订阅这个邮件列表,\n" +" 您可以点击 取消我的订阅请求." + +msgid "Your confirmation is required to join the %(listname)s mailing list" +msgstr "您需要对加入 %(listname)s 邮件列表进行确认" + +msgid "Your confirmation is required to leave the %(listname)s mailing list" +msgstr "您需要对退出 %(listname)s 邮件列表进行确认" + +msgid "Your current option settings:" +msgstr "您的当前操作设置:" + +msgid "Your decision" +msgstr "您的决定" + +msgid "Your email address:" +msgstr "您的邮件地址:" + #, c-format msgid "Your file or directory '%s' is probably out-of-date" msgstr "您的文件或目录”%s“可能已经过时" +msgid "" +"Your membership in the %(realname)s mailing list is\n" +" currently disabled due to excessive bounces. Your confirmation is\n" +" required in order to re-enable delivery to your address. We have the\n" +" following information on file:\n" +"\n" +"

    • Member address: %(member)s\n" +"
    • Member name: %(username)s\n" +"
    • Last bounce received on: %(date)s\n" +"
    • Approximate number of days before you are permanently removed\n" +" from this list: %(daysleft)s\n" +"
    \n" +"\n" +" Hit the Re-enable membership button to resume receiving postings\n" +" from the mailing list. Or hit the Cancel button to defer\n" +" re-enabling your membership.\n" +" " +msgstr "" +"您在邮件列表 %(realname)s 当中的成员资格由于您过多的退信被禁止了.\n" +" 如果您希望能够重新向您的地址发送消息,您必须通过验证.\n" +" 下面是我们的文本信息:\n" +"\n" +"
    • 成员地址: %(member)s\n" +"
    • 成员姓名: %(username)s\n" +"
    • 收到最后一次退信的时间 %(date)s\n" +"
    • 在您被永久的从这个邮件列表中删除之前还剩下大约的天数: %(daysleft)s\n" +"
    \n" +"\n" +" 点击 重新设置您的成员资格有效 按钮以继续接收来自这个邮件列表的信件.\n" +" 或者点击取消 按钮 推迟重新设置有效您的成员资格.\n" +" " + +msgid "Your message had a suspicious header." +msgstr "您的信件带有可疑的邮件头" + +msgid "Your message to %(listname)s awaits moderator approval" +msgstr "您发送到 %(listname)s 的信件已经交由列表主持者审批" + +msgid "Your message was deemed inappropriate by the moderator." +msgstr "列表主持人认为您的信息不合适。" + +msgid "Your message was rejected" +msgstr "您的消息被拒绝了" + +msgid "" +"Your message was too big; please trim it to less than\n" +"%(kb)d KB in size." +msgstr "您的信件过大，请修改信件内容至小于 %(kb)s KB" + +msgid "Your new %(listname)s list password" +msgstr "您的 %(listname)s列表的新口令" + +msgid "Your new mailing list: %(listname)s" +msgstr "您新建的邮件列表: %(listname)s" + #. (para) msgid "" "Your own formal public identifiers should use the following syntax in order to record their DocBook derivation: \n" @@ -39577,6 +47669,12 @@ msgstr "" "-//your-owner-ID//text-class DocBook Vversion-Based Subset|Extension|Variant your-descrip-and-version//lang\n" "" +msgid "Your password is: %(password)s" +msgstr "您的密码是: %(password)s" + +msgid "Your passwords did not match." +msgstr "您的口令不匹配。" + #. Resource IDs: (170) msgid "" "Your previously entered log messages have been saved.\n" @@ -39585,6 +47683,70 @@ msgstr "" "你过去输入过的日志信息已经保存。\n" "点击这里阅读历史并重新插入日志。" +msgid "Your real name:" +msgstr "您的真实姓名:" + +msgid "Your request has been forwarded to the list moderator for approval." +msgstr "您的请求已经被转发给列表管理员以待核准。" + +msgid "" +"Your subscription is not allowed because\n" +"the email address you gave is insecure." +msgstr "由于您提供的邮件地址不可靠，所以您的订阅请求没有被批准。" + +msgid "" +"Your subscription is not allowed because the email address you gave is\n" +"insecure." +msgstr "您的订阅请求被拒绝了，因为您提供的邮件地址是不可靠的。" + +msgid "" +"Your subscription request has been forwarded to the list administrator\n" +"at %(listowner)s for review." +msgstr "您的订阅要求已经转发给了列表管理员 %(listowner)s 。" + +msgid "" +"Your subscription request has been received, and will soon be acted upon.\n" +"Depending on the configuration of this mailing list, your subscription request\n" +"may have to be first confirmed by you via email, or approved by the list\n" +"moderator. If confirmation is required, you will soon get a confirmation\n" +"email which contains further instructions." +msgstr "" +"您的订阅请求已经被收到，并将很快被处理。依赖于此列表的配置，您的注册请求\n" +"可能需要您通过邮件进行确认，或者需要由列表管理员批准。如果需要进行确认的\n" +"话，很快您就将收到一封确认函，确认函里将包含更进一步的指导信息。" + +msgid "" +"Your subscription request was deferred because %(x)s. Your request has been\n" +"forwarded to the list moderator. You will receive email informing you of the\n" +"moderator's decision when they get to your request." +msgstr "" +"因为 %(x)s ，您的订阅请求被搁置了。您的请求已经被转发给列表管理员。在列表管理\n" +"对您的请求作出决定后，您将会收到邮件通知。" + +msgid "" +"Your unsubscription request has been\n" +" forwarded to the list administrator for approval." +msgstr "您的取消订阅的请求已经转发给列表管理员,等待批准." + +msgid "" +"Your unsubscription request has been forwarded to the list administrator for\n" +"approval." +msgstr "您的取消订阅的请求已经发送给列表管理员去审查。" + +msgid "" +"Your unsubscription request has been received and\n" +" forwarded on to the list moderators for approval. You will\n" +" receive notification once the list moderators have made their\n" +" decision." +msgstr "" +"您的退订请求已被收到并转发给列表管理员以待其核准。\n" +" 管理员作出决定后您将受到一封邮件通知。" + +msgid "" +"Your urgent message to the %(realname)s mailing list was not authorized for\n" +"delivery. The original message as received by Mailman is attached.\n" +msgstr "您发送到 %(realname)s 邮件列表的加急信息没有投递授权。附上Mailman收讫的原始信息。\n" + #. Resource IDs: (1112) msgid "Your version is:" msgstr "你的版本是：" @@ -39680,6 +47842,21 @@ msgstr "[没有可用的错误输出。]" msgid "[Error output could not be translated from the native locale to UTF-8.]" msgstr "[错误输出不能从本地区域转变为 UTF-8。]" +msgid "[Message discarded by content filter]" +msgstr "[被内容过滤程序删除的信件]" + +msgid "[No bounce details are available]" +msgstr "[无退信的细节信息]" + +msgid "[No explanation given]" +msgstr "[没有给出原因]" + +msgid "[No reason given]" +msgstr "[没有给出原因]" + +msgid "[no description available]" +msgstr "[没有描述]" + #. (secondary), (refmiscinfo) msgid "_any" msgstr "_any" @@ -39692,6 +47869,9 @@ msgstr "_any.mml" msgid "_any.svg" msgstr "_any.svg" +msgid "a single held message." +msgstr "仅一个滞留信息." + #. (entry) msgid "a1" msgstr "a1" @@ -39756,6 +47936,9 @@ msgstr "accept-charset" msgid "accesskey" msgstr "accesskey" +msgid "ack" +msgstr "承认" + #. (secondary), (refentrytitle), (refmiscinfo), (refname), (tag) msgid "acknowledgements" msgstr "acknowledgements" @@ -39799,6 +47982,9 @@ msgstr "address" msgid "address ::=" msgstr "address ::=" +msgid "administrative list overview" +msgstr "管理列表概览" + #. (tag), (secondary), (refentrytitle), (refname) msgid "affiliation" msgstr "affiliation" @@ -39829,6 +48015,12 @@ msgstr "对齐(枚举)" msgid "all" msgstr "all" +msgid "all held messages." +msgstr "全部滞留信息." + +msgid "all of %(esender)s's held messages." +msgstr "所有的 %(esender)s's 滞留信息." + msgid "allocating new copy ID (getting 'next-key')" msgstr "正在分配新副本 ID（正在获取“next-key”）" @@ -39838,6 +48030,9 @@ msgstr "正在分配新的节点 ID （正在获取“next-key”）" msgid "allocating new representation (getting next-key)" msgstr "正在分配新修订版（正在获取 next-key）" +msgid "also " +msgstr "同样" + #. (secondary), (refentrytitle), (refname), (tag), (member) msgid "alt" msgstr "alt" @@ -39986,6 +48181,12 @@ msgstr "article" msgid "article ::=" msgstr "article ::=" +msgid "article db files must be %(octperms)s: %(path)s" +msgstr "文章数据库文件必须是 %(octperms)s: %(path)s" + +msgid "article file %(filename)s is missing!" +msgstr "文章文件 %(filename)s 丢失" + #. (tag), (secondary), (refentrytitle), (refname) msgid "artpagenums" msgstr "artpagenums" @@ -40002,6 +48203,12 @@ msgstr "attr" msgid "attribute" msgstr "属性" +msgid "attribute \"%(k)s\" changed" +msgstr "属性\"%(k)s\"被修改" + +msgid "attribute \"%(k)s\" ignored" +msgstr "属性\"%(k)s\"被忽略" + #. (para) msgid "attributes" msgstr "属性" @@ -40385,6 +48592,18 @@ msgstr "正在提取下一个修订版键" msgid "button" msgstr "button" +msgid "by the admin" +msgstr "由管理员" + +msgid "by the list administrator" +msgstr "(由)列表管理员" + +msgid "by you" +msgstr " 由您" + +msgid "by yourself" +msgstr "(由)您自己" + msgid "bypass the repository hook system" msgstr "跳过版本库钩子系统" @@ -40584,6 +48803,19 @@ msgstr "charoff (十进制数)" msgid "charoff (enumeration)" msgstr "charoff (枚举)" +msgid "" +"check a translated template against the original one\n" +" search also tags if html is not zero" +msgstr "" +"对比原始模板检查翻译后的模板\n" +" 如果html长不为零,则搜索标签" + +msgid "check a translation comparing with the original string" +msgstr "和原始字符串比较,检查翻译" + +msgid "check for differences between checked in and checked out" +msgstr "检查读入和输出的不同" + #. (quote) msgid "checkbox" msgstr "checkbox" @@ -40596,6 +48828,30 @@ msgstr "checked" msgid "checked (enumeration)" msgstr "checked (枚举)" +msgid "checking cgi-bin permissions" +msgstr "检查cgi-bin许可权" + +msgid "checking mode for %(prefix)s" +msgstr "检查 %(prefix)s 的许可权" + +msgid "checking ownership of %(dbfile)s" +msgstr "查看 %(dbfile)s 的所有者" + +msgid "checking permissions on %(file)s" +msgstr "查看 %(file)s 的权限" + +msgid "checking permissions on %(pwfile)s" +msgstr "检查 %(pwfile)s 的许可权" + +msgid "checking permissions on list data" +msgstr "检查列表数据的许可权" + +msgid "checking perms on %(private)s" +msgstr "检查 %(private)s 的许可权" + +msgid "checking set-gid for %(wrapper)s" +msgstr "检查 %(wrapper)s 的set-gid许可权" + #. (command) msgid "chgrp" msgstr "chgrp" @@ -41044,6 +49300,9 @@ msgstr "corporation" msgid "could not connect to server" msgstr "无法连接到服务器" +msgid "couldn't remove old file %(pyc)s -- %(rest)s" +msgstr "无法删除旧文件 %(pyc)s -- %(rest)s" + #. (tag), (secondary), (refentrytitle), (refname) msgid "country" msgstr "country" @@ -41120,6 +49379,12 @@ msgstr "date" msgid "date ::=" msgstr "date ::=" +msgid "day" +msgstr "天" + +msgid "days" +msgstr "天" + #. (refmiscinfo) msgid "db._any" msgstr "db._any" @@ -42757,6 +51022,18 @@ msgstr "正在从“nodes”表删除条目" msgid "deleting representation" msgstr "正在删除修订版" +msgid "delivery disabled by user" +msgstr "用户已经禁止投递" + +msgid "delivery enabled" +msgstr "启用投递" + +msgid "delivery off" +msgstr "接收关闭" + +msgid "delivery on" +msgstr "接收开启" + #. (entry), (term) msgid "depth" msgstr "depth" @@ -42779,10 +51056,25 @@ msgstr "destructorsynopsis ::=" msgid "devicefile" msgstr "devicefile" +msgid "digest" +msgstr "摘要" + +msgid "digest footer" +msgstr "摘要尾部" + +msgid "digest header" +msgstr "摘要头部" + #. (replaceable), (member) msgid "directory" msgstr "directory" +msgid "directory must be at least 02775: %(d)s" +msgstr "目录许可权必须至少为02775: %(d)s" + +msgid "directory permissions must be %(octperms)s: %(path)s" +msgstr "目录许可权必须是 %(octperms)s: %(path)s" + msgid "disable automatic log file removal [Berkeley DB]" msgstr "禁用自动删除日志文件 [BDB]" @@ -42865,6 +51157,9 @@ msgstr "不要在提交后删除修改列表" msgid "don't unlock the targets" msgstr "不要解锁目标" +msgid "done" +msgstr "完成" + #, c-format msgid "done.\n" msgstr "完成。\n" @@ -42877,6 +51172,12 @@ msgstr "double-click" msgid "down" msgstr "down" +msgid "due to bounces" +msgstr "由于退信" + +msgid "due to excessive bounces" +msgstr "因为过多的退信" + msgid "dump incrementally" msgstr "以增量方式进行转存" @@ -42928,6 +51229,9 @@ msgstr "email" msgid "email ::=" msgstr "email ::=" +msgid "email address and " +msgstr "邮件地址和" + #. (member) msgid "emailmessage" msgstr "emailmessage" @@ -43319,10 +51623,16 @@ msgstr "插图(figure)禁止出现在脚注(footnote)的子节点中。" msgid "figure must not occur in the descendants of table" msgstr "figure 禁止出现在 table 的后代节点中" +msgid "figuring article archives\n" +msgstr "处理文章存档\n" + #. (replaceable) msgid "file" msgstr "file" +msgid "file permissions must be at least 660: %(path)s" +msgstr "文件许可权至少是660： %(path)s" + #. (tag), (secondary), (refentrytitle), (refname) msgid "filename" msgstr "filename" @@ -43363,6 +51673,13 @@ msgstr "firstterm" msgid "firstterm ::=" msgstr "firstterm ::=" +msgid "" +"fixing all the perms on your old html archives to work with b6\n" +"If your archives are big, this could take a minute or two..." +msgstr "" +"正在修复您旧的html存档上所有的错误来使b6工作\n" +"如果您的存档很大, 可能需要花费一两分钟时间..." + #. (entry), (term), (glossterm) msgid "float" msgstr "浮动" @@ -43395,6 +51712,9 @@ msgstr "footnoteref" msgid "footnoteref ::=" msgstr "footnoteref ::=" +msgid "for unknown reasons" +msgstr "因为未知原因" + msgid "force operation to run" msgstr "强制操作运行" @@ -43439,6 +51759,9 @@ msgstr "format" msgid "format (enumeration)" msgstr "format (枚举)" +msgid "found in:" +msgstr "在这里找到：" + #. (member) msgid "fqdomainname" msgstr "fqdomainname" @@ -43455,6 +51778,9 @@ msgstr "frame" msgid "frame (enumeration)" msgstr "frame (枚举)" +msgid "from %(start)s to %(end)s" +msgstr "从 %(start)s 到 %(end)s" + #. (secondary), (refentrytitle), (refname), (tag) msgid "funcdef" msgstr "funcdef" @@ -43515,6 +51841,9 @@ msgstr "genentity" msgid "general entity" msgstr "普通实体" +msgid "general list overview" +msgstr "通用列表概览" + msgid "" "general usage: svnadmin SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...]\n" "Type 'svnadmin help ' for help on a specific subcommand.\n" @@ -43592,6 +51921,9 @@ msgstr "get" msgid "get repository uuid" msgstr "获取版本库 UUID" +msgid "getting rid of old source files" +msgstr "去除旧的源文件" + msgid "give output suitable for concatenation" msgstr "给予适合串联的输出" @@ -43599,6 +51931,9 @@ msgstr "给予适合串联的输出" msgid "global" msgstr "global" +msgid "globally" +msgstr "全局地" + #. (tag), (secondary), (refentrytitle), (refname) msgid "glossary" msgstr "glossary" @@ -43771,6 +52106,9 @@ msgstr "headers" msgid "hidden" msgstr "hidden" +msgid "hide" +msgstr "隐藏" + #. (tag), (secondary), (refentrytitle), (refname) msgid "holder" msgstr "holder" @@ -44514,6 +52852,9 @@ msgstr "最后更新：" msgid "left" msgstr "left" +msgid "legal values are:" +msgstr "合法的值：" + #. (tag), (secondary), (refentrytitle), (refname) msgid "legalnotice" msgstr "legalnotice" @@ -44595,6 +52936,15 @@ msgstr "link" msgid "link ::=" msgstr "link ::=" +msgid "list creator" +msgstr "列表创建者" + +msgid "list info" +msgstr "列表信息" + +msgid "list of available mailing lists." +msgstr "可用的邮件列表的清单" + msgid "listen hostname or IP address (for daemon mode)" msgstr "监听主机名或IP地址（后台模式）" @@ -44612,6 +52962,9 @@ msgstr "listitem" msgid "listitem ::=" msgstr "listitem ::=" +msgid "listname is required" +msgstr "需要列表名" + #. (tag), (secondary), (refentrytitle), (refname) msgid "literal" msgstr "literal" @@ -44712,6 +53065,9 @@ msgstr "markup" msgid "markup ::=" msgstr "markup ::=" +msgid "matching mailing lists found:" +msgstr "匹配的邮件列表：" + #. (quote) msgid "mathml" msgstr "mathml" @@ -44742,6 +53098,9 @@ msgstr "日值项最大值" msgid "maxlength" msgstr "maxlength" +msgid "mbox file must be at least 0660:" +msgstr "mbox文件许可权必须至少为0660:" + #. (tag), (secondary), (refentrytitle), (refname) msgid "mediaobject" msgstr "mediaobject" @@ -44758,6 +53117,12 @@ msgstr "member" msgid "member ::=" msgstr "member ::=" +msgid "member address
    member name" +msgstr "成员地址
    成员姓名" + +msgid "members" +msgstr "成员" + #. (tag), (secondary), (refentrytitle), (refname) msgid "menuchoice" msgstr "menuchoice" @@ -44770,6 +53135,9 @@ msgstr "menuchoice ::=" msgid "merged" msgstr "合并" +msgid "message is unparsable: %(filebase)s" +msgstr "消息无法解析: %(filebase)s" + #. (member) msgid "meta" msgstr "meta" @@ -44834,6 +53202,9 @@ msgstr "mm" msgid "mml:*" msgstr "mml:*" +msgid "mod" +msgstr "修改" + #. Resource IDs: (10) msgid "modified" msgstr "修改" @@ -44986,6 +53357,9 @@ msgstr "multiple (枚举)" msgid "n" msgstr "n" +msgid "n/a" +msgstr "n/a" + #. (replaceable), (member) msgid "name" msgstr "name" @@ -45041,13 +53415,28 @@ msgstr "nn" msgid "no" msgstr "否" +msgid "no date" +msgstr "没有日期" + #. Resource IDs: (10) msgid "no description for this command is available" msgstr "此命令尚无帮助" +msgid "no lists == nothing to do, exiting" +msgstr "没有列表文件 == 无事可做, 退出" + msgid "no progress (only errors) to stderr" msgstr "在标准错误输出不显示进度 (仅错误)" +msgid "no subject" +msgstr "没有主题" + +msgid "nodupes" +msgstr "无副本" + +msgid "nomail
    [reason]" +msgstr "没有邮件
    [原因]" + #. Resource IDs: (10) msgid "non-versioned" msgstr "无版本控制" @@ -45080,6 +53469,12 @@ msgstr "常规" msgid "norowheader" msgstr "norowheader" +msgid "not available" +msgstr "不可用" + +msgid "not metoo" +msgstr "除了我" + #. (tag), (secondary), (refentrytitle), (refname) msgid "note" msgstr "note" @@ -45167,6 +53562,9 @@ msgstr "过时；尝试 --depth=files 或 --depth=immediates" msgid "obstructed" msgstr "阻碍" +msgid "off" +msgstr "关闭" + #. Resource IDs: (601) msgid "offline" msgstr "离线" @@ -45183,6 +53581,9 @@ msgstr "olink" msgid "olink ::=" msgstr "olink ::=" +msgid "on" +msgstr "开启" + #. (para), (term) msgid "onblur" msgstr "onblur" @@ -45304,6 +53705,9 @@ msgstr "optional" msgid "optional ::=" msgstr "optional ::=" +msgid "options" +msgstr "选项" + #. Resource IDs: (1406, 1407) msgid "or" msgstr "或" @@ -45538,6 +53942,9 @@ msgstr "parameter ::=" msgid "parameter entity" msgstr "参数实体" +msgid "parse a .po file extracting msgids and msgstrs" +msgstr "解析一个 .po文件, 读出消息标识和消息串" + #. (tag), (member), (secondary), (refentrytitle), (refname) msgid "part" msgstr "part" @@ -45761,6 +54168,12 @@ msgstr "printhistory" msgid "printhistory ::=" msgstr "printhistory ::=" +msgid "private" +msgstr "私人的" + +msgid "private archives" +msgstr "私人邮件存档" + #. (tag), (member), (secondary), (refentrytitle), (refname) msgid "procedure" msgstr "procedure" @@ -45777,6 +54190,9 @@ msgstr "process" msgid "processing instruction" msgstr "处理指令" +msgid "processing mailing list:" +msgstr "正处理邮件列表：" + #. (tag), (secondary), (refentrytitle), (refname) msgid "production" msgstr "production" @@ -45901,6 +54317,12 @@ msgstr "pubdate" msgid "pubdate ::=" msgstr "pubdate ::=" +msgid "public" +msgstr "公开的" + +msgid "public archives" +msgstr "公有邮件存档" + #. (glossterm) msgid "public identifier" msgstr "公共标识符" @@ -46209,6 +54631,12 @@ msgid "" " from source repository [Berkeley DB]" msgstr "删除源版本库中多余的BDB日志文件 [BDB]" +msgid "removing %(src)s" +msgstr "删除%(src)s" + +msgid "removing directory %(src)s and everything underneath" +msgstr "删除目录%(src)s 及其目录内所有文件" + #. (entry), (term) msgid "renderas" msgstr "renderas" @@ -46283,6 +54711,9 @@ msgstr "获取所有版本属性" msgid "retrieve revision property ARG" msgstr "获取版本属性 ARG" +msgid "return to the %(categoryname)s options page." +msgstr "返回 %(categoryname)s 选项页面." + #. (tag), (secondary), (refentrytitle), (refname) msgid "returnvalue" msgstr "returnvalue" @@ -46361,6 +54792,9 @@ msgstr "rhs ::=" msgid "right" msgstr "right" +msgid "right " +msgstr "正确" + #. (literal) msgid "ro" msgstr "ro" @@ -46474,6 +54908,15 @@ msgstr "scalefit" msgid "scalefit (enumeration)" msgstr "scalefit (枚举)" +msgid "scan a string from the original file" +msgstr "从原始文件扫描一串字符串" + +msgid "scan a translated string" +msgstr "扫描翻译后的字符串" + +msgid "scan the po file comparing msgids with msgstrs" +msgstr "对比消息标识和消息串扫描po文件" + #. (entry), (term) msgid "scheme" msgstr "scheme" @@ -46846,10 +55289,16 @@ msgstr "simul" msgid "singular" msgstr "singular" +msgid "site" +msgstr "站点" + #. (para), (term) msgid "size" msgstr "size" +msgid "size not available" +msgstr "不被允许的大小" + #. (literal) msgid "sk" msgstr "sk" @@ -46874,6 +55323,9 @@ msgstr "sortas" msgid "source" msgstr "source" +msgid "source perms must be %(octperms)s: %(path)s" +msgstr "源许可权必须是 %(octperms)s: %(path)s" + #. (member) msgid "space" msgstr "space" @@ -46975,6 +55427,9 @@ msgstr "指定事务名称 ARG" msgid "src" msgstr "src" +msgid "stale lock file" +msgstr "失效的被锁文件" + #. (entry) msgid "startinglinenumber" msgstr "startinglinenumber" @@ -47031,6 +55486,9 @@ msgstr "stepalternatives" msgid "stepalternatives ::=" msgstr "stepalternatives ::=" +msgid "stop is synonymous with the end command.\n" +msgstr "stop 和end 命令相同\n" + msgid "storing copy record" msgstr "正在存储副本记录" @@ -47122,6 +55580,12 @@ msgstr "subscript" msgid "subscript ::=" msgstr "subscript ::=" +msgid "subscriptions to %(name)s require administrator approval" +msgstr "%(name)s 的订阅需要管理员批准" + +msgid "subscriptions to %(realname)s require moderator approval" +msgstr "对 %(realname)s 的订阅请求需要列表主持者批准" + #. (tag), (secondary), (refentrytitle), (refname) msgid "substeps" msgstr "substeps" @@ -47657,6 +56121,15 @@ msgstr "" "在ARG版本（如同 -r ARG-1:ARG）作的修改\n" " 如果ARG为负数则等价于 -r ARG:ARG-1" +msgid "the list admin overview page" +msgstr "列表管理概览页面" + +msgid "the list administrator" +msgstr "列表管理员" + +msgid "the mailing list overview page" +msgstr "邮件列表简介页" + #. (tag), (secondary), (refentrytitle), (refname) msgid "thead" msgstr "thead" @@ -47693,6 +56166,9 @@ msgstr "有冲突的修改。" msgid "there's no way to construct a logical index because an entry in the index should never have both a see and other content." msgstr "在这没办法创建一个合理的索引，因为在索引中的一个条目不可能有二个 see 和其它内容。" +msgid "thread" +msgstr "线索" + msgid "timed out waiting for server" msgstr "等待服务器超时" @@ -48006,6 +56482,9 @@ msgstr "未知" msgid "unknown capability '%s'" msgstr "未知特性“%s”" +msgid "unknown sender" +msgstr "未知的发送者" + #. (member) msgid "unnumbered" msgstr "unnumbered" @@ -48014,10 +56493,19 @@ msgstr "unnumbered" msgid "unspecified" msgstr "未指定" +msgid "unsub" +msgstr "取消订阅" + +msgid "unsubscriptions require moderator approval" +msgstr "退订需要列表主持人批准" + #. (member) msgid "up" msgstr "up" +msgid "updating old qfiles" +msgstr "升级旧的qfiles" + #. (member) msgid "upperalpha" msgstr "upperalpha" @@ -48869,6 +57357,9 @@ msgstr "videoobject ::=" msgid "view" msgstr "view" +msgid "view all messages from %(esender)s" +msgstr "查看来自 %(esender)s 所有的信息" + #. (tag), (member), (secondary), (refentrytitle), (refname) msgid "void" msgstr "void" -- 2.11.4.GIT