From 3048b383d320c89e309bd71cbacefad5cdc5e05f Mon Sep 17 00:00:00 2001 From: joseph Date: Sun, 27 Sep 2015 11:30:21 +0000 Subject: [PATCH] Remove some old validation stuff This is more confusing than useful! git-svn-id: http://www.latex-project.org/svnroot/latex2e-public@876 8685b20e-f38a-4a74-812f-bec00e2e18bd --- trunk/validate/addcontents.tex | 5 -- trunk/validate/ascii.tcx | 3 - trunk/validate/test209.tex | 166 ----------------------------------- trunk/validate/test2e.tex | 190 ----------------------------------------- 4 files changed, 364 deletions(-) delete mode 100644 trunk/validate/addcontents.tex delete mode 100644 trunk/validate/ascii.tcx delete mode 100644 trunk/validate/test209.tex delete mode 100644 trunk/validate/test2e.tex diff --git a/trunk/validate/addcontents.tex b/trunk/validate/addcontents.tex deleted file mode 100644 index a1d4d04..0000000 --- a/trunk/validate/addcontents.tex +++ /dev/null @@ -1,5 +0,0 @@ -% This file is \include'd by tlatex5.lvt -\bugid{132} -\subsubsection{Included subsubsection} -\subsection{Included subsection} -\section{Included section} diff --git a/trunk/validate/ascii.tcx b/trunk/validate/ascii.tcx deleted file mode 100644 index 1e917fd..0000000 --- a/trunk/validate/ascii.tcx +++ /dev/null @@ -1,3 +0,0 @@ -%% ascii.tcx: transparent encoding translation table for TeX -%% This restores the old (pre-teTeX) behaviour of printing all -%% non-printable ASCII characters using ^^ notation. diff --git a/trunk/validate/test209.tex b/trunk/validate/test209.tex deleted file mode 100644 index 23b4c46..0000000 --- a/trunk/validate/test209.tex +++ /dev/null @@ -1,166 +0,0 @@ -% \iffalse meta-comment -% -% Copyright (C) 1992 by David Carlisle, Frank Mittelbach. -% All rights reserved. -% -% This file is part of the validate package. -% -% IMPORTANT NOTICE: -% -% You are not allowed to change this file. In case of error -% write to the email address mentioned in the file readme.val. -% -% \fi -% test209.tex - %%%%%%%%%%% - -% David Carlisle -% Version 0.0, 28 May 1992 -% Version 0.1, 18 Jun 1992 FMi small updates -% Version 1.0a, 28 Jun 1992 FMi small updates for distribution -% Version 1.0b, 1994/12/08 DPC update for LaTeX2e - -\def\fileversion{v1.0c} -\def\filedate{1994/01/19} - -% This file should not be used as a package or class file, -% it should be \input. - -% The scope of this \makeatletter will then be the rest of the -% document. Put TeX into scroll mode, and stop it showing the -% implementation details of macros in error messages. -% -\makeatletter -\scrollmode -\errorcontextlines=-1 - -% Start the test, after the optional \documentclass (or \documentstyle) -% \begin{document} commands with \START. All lines in the .log file -% before this will be ignored. It also prints a docstrip-style -% character table in the .tlg file so the .tlg file can easily be -% checked for email translations. -% -\def\START{\typeout{START-TEST-LOG^^J^^J% - This is a generated file for the LaTeX 2.09 validation system.% -^^J^^JDon't change this file in any respect.% -^^J^^J\CTable^^J}} - -\begingroup -\catcode`\^^\=0 -\catcode`\^^A=\catcode`\% -^^\catcode`^^\ =11 -^^\catcode`^^\%=11 -^^\catcode`^^\#=11 -^^\catcode`^^\~=11 -^^\endlinechar=`^^\^^J -^^\catcode`^^\\=11^^A -^^\gdef^^\CTable{ -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -}^^A -^^\endgroup{}% - -% The test should end with -% \END or \end{document} -% -\let\@@@end\@@end -%\let\@ED=\enddocument -\def\END{\typeout{END-TEST-LOG}\@@@end} -\let\@@end\END - - -% After the \START should come declarations of the format and style -% options being used. -% -\def\FORMAT#1{\typeout{Format: #1}% - \def\@tempa{#1}\ifx\@tempa\@EJ\else - \OMIT\@warning{Declared format #1,^^JActual format \@EJ}\TIMO\fi} - -% The old version got this information from everyjob, -% but that does not work with LaTeX2e as \everyjob is cleared. -\edef\@EJ{\fmtname <\fmtversion>} - -% Some author info: -\def\AUTHOR#1{\typeout{Author: #1}} -\def\ADDRESS#1{\typeout{Address: #1}} - -% Not all packages declare themselves to the log file, and we can not -% rely on TeX`s output as it includes full path names, and does not -% include version numbers etc. So for each package included give a -% declaration like: \PACKAGES{array v2.0d} -% -\def\STYLE#1{\typeout{Main Style: #1}}% -\def\STYLEOPTIONS#1{\typeout{Style Options: #1}} - - -% If The class or package is loaded with options, you may -% specify the options in the \CLASS (\PACKAGE) declaration. eg: -% -% \CLASS[german,a4page]{article v2.0 1994/01/02} -% \PACKAGE{ifthen v2.2 1993/11/12} -% \PACKAGE[dvips]{graphics v 3.8 1994/02/02} -% -\def\CLASS{\@ifnextchar[\OPTCLASS\XCLASS} -\def\OPTCLASS[#1]#2{% - \typeout{Main Class: #2^^J\@spaces Options: #1}} -\def\XCLASS#1{% - \typeout{Main Class: #1}} - -\def\PACKAGE{\@ifnextchar[\OPTPACKAGE\XPACKAGE} -\def\OPTPACKAGE[#1]#2{% - \typeout{Package: #2^^J\@spaces Options: #1}} -\def\XPACKAGE#1{% - \typeout{Package: #1}} - - - -% LaTeX2e always uses NFSS2 so new test files need not use -% \FONTSELECTION but it is retained for compatibility for test files -% written for 209/NFSS1. -% -\def\FONTSELECTION#1{% - \OMIT\@@warning{\noexpand\FONTSELECTION obsolete.^^J% - LaTeX2e always uses NFSS2}\TIMO - \typeout{Font Selection: #1}} - - - -% Surround commands which produce irrelevant lines in the .log file by -% \OMIT -% \TIMO -% -\def\OMIT{\typeout{OMIT}} -\def\TIMO{\typeout{TIMO}} - -% After the above declarations, and before the main tests, you may -% optionally `declare' all the commands in the `module' that you are -% about to test. These commands will be registered as defined, -% undefined or relaxed (ie \let to \relax). You may wish to declare -% commands not currently implemented, so that if they are added at a -% later stage, the test will fail, reminding someone to document the -% fact that the user interface has changed. So if you are testing -% array and tabular environments, you may wish do declare -% \extrarowheight. This is undefined in the curent latex, but would -% become defined if Mittelbach's array.sty was incorporated into -% latex.tex. -% -\def\declare@command#1{% - \ifx#1\@undefined\typeout{Undefined \string#1}\else - \ifx#1\relax\typeout{Relaxed \space\space\string#1}\else - \typeout{Defined \space\space\string#1}\fi\fi} - -\endinput diff --git a/trunk/validate/test2e.tex b/trunk/validate/test2e.tex deleted file mode 100644 index dd38b0b..0000000 --- a/trunk/validate/test2e.tex +++ /dev/null @@ -1,190 +0,0 @@ -% \iffalse meta-comment -% -% Copyright (C) 1992-1994 by David Carlisle, Frank Mittelbach. -% All rights reserved. -% -% This file is part of the validate package. -% -% IMPORTANT NOTICE: -% -% You are not allowed to change this file. In case of error -% write to the email address mentioned in the file readme.val. -% -% \fi -% test2e.tex - %%%%%%%%%%% - -% David Carlisle -% Version 0.0, 28 May 1992 -% Version 0.1, 18 Jun 1992 FMi small updates -% Version 1.0a, 28 Jun 1992 FMi small updates for distribution -% Version 1.0b, 1993/12/08 DPC update for LaTeX2e -% Version 1.0e, add config file. -% Version 1.0f, drop \errorstopmode from \loggingoutput - -% \def\fileversion{v1.0e} -% \def\filedate{1994/05/19} - -% This file should not be used as a package or class file, -% it should be \input. - -% The scope of this \makeatletter will then be the rest of the -% document. Put TeX into scroll mode, and stop it showing the -% implementation details of macros in error messages. -% -\makeatletter -\scrollmode -\errorcontextlines=-1 - -% Use the same \showbox settings as 2.09, unless they are changed in -% the test file. (2e sets these to -1) -\showboxbreadth=5 -\showboxdepth=3 - - -% drop \errorstopmode from \logginoutput so that testing doesn't stop -% for \showoutput -\gdef\loggingoutput{\tracingoutput\@ne - \showboxbreadth\maxdimen\showboxdepth\maxdimen} - - -% Start the test, after the optional \documentclass (or \documentstyle) -% \begin{document} commands with \START. All lines in the .log file -% before this will be ignored. It also prints a docstrip-style -% character table in the .tlg file so the .tlg file can easily be -% checked for email translations. -% -\def\START{\typeout{START-TEST-LOG^^J^^J% - This is a generated file for the LaTeX2e validation system.% -^^J^^JDon't change this file in any respect.% -^^J^^J\CTable^^J}} - -\begingroup -\catcode`\^^\=0 -\catcode`\^^A=\catcode`\% -^^\catcode`^^\ =11 -^^\catcode`^^\%=11 -^^\catcode`^^\#=11 -^^\catcode`^^\~=11 -^^\endlinechar=`^^\^^J -^^\catcode`^^\\=11^^A -^^\gdef^^\CTable{ -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -}^^A -^^\endgroup{}% - -% The test should end with -% \END or \end{document} -% -\let\@@@end\@@end -%\let\@ED=\enddocument -\def\END{\typeout{END-TEST-LOG}\@@@end} -\let\@@end\END - - -% After the \START should come declarations of the format and style -% options being used. -% -\def\FORMAT#1{\typeout{Format: #1}% - \def\@tempa{#1}\ifx\@tempa\@EJ\else - \OMIT\@warning{Declared format #1,^^JActual format \@EJ}\TIMO\fi} - -% The old version got this information from everyjob, -% but that does not work with LaTeX2e as \everyjob is cleared. -\edef\@EJ{\fmtname <\fmtversion>} - -% Some author info: -\def\AUTHOR#1{\typeout{Author: #1}} -\def\ADDRESS#1{\typeout{Address: #1}} - -% Not all packages declare themselves to the log file, and we can not -% rely on TeX`s output as it includes full path names, and does not -% include version numbers etc. So for each package included give a -% declaration like: \PACKAGES{array v2.0d} -% -\def\STYLE#1{\typeout{Main Style: #1}}% -\def\STYLEOPTIONS#1{\typeout{Style Options: #1}} - - -% If The class or package is loaded with options, you may -% specify the options in the \CLASS (\PACKAGE) declaration. eg: -% -% \CLASS[german,a4page]{article v2.0 1994/01/02} -% \PACKAGE{ifthen v2.2 1993/11/12} -% \PACKAGE[dvips]{graphics v 3.8 1994/02/02} -% -\def\CLASS{\@ifnextchar[\OPTCLASS\XCLASS} -\def\OPTCLASS[#1]#2{% - \typeout{Main Class: #2^^J\@spaces Options: #1}} -\def\XCLASS#1{% - \typeout{Main Class: #1}} - -\def\PACKAGE{\@ifnextchar[\OPTPACKAGE\XPACKAGE} -\def\OPTPACKAGE[#1]#2{% - \typeout{Package: #2^^J\@spaces Options: #1}} -\def\XPACKAGE#1{% - \typeout{Package: #1}} - - - -% LaTeX2e always uses NFSS2 so new test files need not use -% \FONTSELECTION but it is retained for compatibility for test files -% written for 209/NFSS1. -% -\def\FONTSELECTION#1{% - \OMIT\@@warning{\noexpand\FONTSELECTION obsolete.^^J% - LaTeX2e always uses NFSS2}\TIMO - \typeout{Font Selection: #1}} - - - -% Surround commands which produce irrelevant lines in the .log file by -% \OMIT -% \TIMO -% -\def\OMIT{\typeout{OMIT}} -\def\TIMO{\typeout{TIMO}} - -% After the above declarations, and before the main tests, you may -% optionally `declare' all the commands in the `module' that you are -% about to test. These commands will be registered as defined, -% undefined or relaxed (ie \let to \relax). You may wish to declare -% commands not currently implemented, so that if they are added at a -% later stage, the test will fail, reminding someone to document the -% fact that the user interface has changed. So if you are testing -% array and tabular environments, you may wish do declare -% \extrarowheight. This is undefined in the curent latex, but would -% become defined if Mittelbach's array.sty was incorporated into -% latex.tex. -% -\def\declare@command#1{% - \ifx#1\@undefined\typeout{Undefined \string#1}\else - \ifx#1\relax\typeout{Relaxed \space\space\string#1}\else - \typeout{Defined \space\space\string#1}\fi\fi} - - -% To allow testing of possible changes, we allow extra code to be read -% in before the test starts. The necessary code should be placed in a -% file test2e.cfg. -% -\OMIT -\InputIfFileExists{test2e.cfg} - {\typeout{^^J***^^Jtest2e.cfg in operation^^J***^^J}}{} -\TIMO - -\endinput -- 2.11.4.GIT