Update

[less_retarded_wiki.git] / binary.md

# Binary

The word binary in general refers to having [two](two.md) choices or "two of a thing"; in [computer science](compsci.md) binary refers to the base 2 numeral system, i.e. a system of writing numbers with only two symbols, usually [1](one.md)s and [0](zero.md)s, which are commonly interpreted *true* vs *false*. We can write any [number](number.md) in binary just as we can with our everyday [decimal](decimal.md) system (which uses ten digits, as opposed to two), but binary is more convenient for [computers](computer.md) because this system is easy to implement in [electronics](electronics.md) (a switch can be on or off, i.e. 1 or 0; systems with more digits were tried but unsuccessful, they failed miserably in reliability -- see e.g. [ternary](ternary.md) computers). The word *binary* is also by extension used for non-textual computer [files](file.md) such as native [executable](executable.md) programs or asset files for games.

One binary digit (a "place" for binary value in computer memory) can be used to store exactly 1 [bit](bit.md) of [information](information.md). We mostly use binary digits in two ways:

1. With single bits we represent basic **[logic](logic.md)** values, i.e. *true* and *false*, and perform logic operations (e.g. [AND](and.md), [OR](or.md) etc.) with so called **[Boolean](bool.md) algebra**.
2. By grouping multiple bits together we create a **base-2 numeral system** that behaves in the same way as our decimal system and can be used to record numbers. We can build this numeral system with the above mentioned Boolean algebra, i.e. we extend our simple one bit system to multi bit system allowing to work not just with two values (*true* and *false*) but with many distinct values (whole numbers, from which we may later construct fractions etc.). Thanks to this we can implement algebraic operations such as addition, multiplication, square roots etc.

Of course the binary system didn't appear from nowhere, people in ancient times used similar systems, e.g. the poet Pingala (200 BC) created a system that used two syllables for counting, old Egyptians used so called Eye of Horus, a unit based on power of two fractions etc. Thomas Harriot used something very similar to today's binary in 1600s. It's just that until computers appeared there wasn't much practical use for it, so no one cared.

{ There is one classic but overplayed [joke](jokes.md) that became extremely cringe exactly by being too overplayed by wannabe haxors who think learning binary makes you Einstein, however since many noobs will likely be reading this and it helps understand the subject, it may be good to tell it anyway. It goes like this: There are 10 types of people -- those who understand binary and those who don't. Sometimes this is extended with: and those who don't know this joke is in base 3. You can also give people the finger by sending them "binary four". ~drummyfish }

## Boolean Algebra ("True/False Logic")

In binary we start by working with single [bits](bit.md) -- each bit can hold two values, 1 and 0. We may see bits now like "simple numbers", we'll want to do operations with them, but they can only ever be one of the two values. Though we can interpret these values in any way -- e.g. in electronics we see them as high vs low [voltage](voltage.md) -- in mathematics we traditionally turn to using [logic](logic.md) and interpret them as meaning *true* (1) and *false* (0). This will further allow us to apply all the knowledge and theory we have gathered about logic, such as formulas that allow us to simplify binary expressions etc.

Next we want to define "operations" we can perform on single bits -- for this we use so called **[Boolean](bool.md) algebra**, which is originally a type of abstract algebra that works with [sets](set.md) and their operations such as conjunction, disjunction etc. Boolean algebra can be seen as a sort of simplified version of what we do in "normal" elementary school algebra -- just as we can add or multiply numbers, we can do similar things with individual bits, we just have a bit different operations such as logic [AND](and.md), logic [OR](or.md) and so on. Generally Boolean algebra can operate with more than just two values, however that's more interesting to mathematicians; for us all we need now is a binary Boolean algebra -- that's what programmers have adopted for their field. It is the case that in context of computers and programming we implicitly understand Boolean algebra to be the one working with 1s and 0s, i.e. the binary version, so the word **"boolean"** is essentially used synonymously with "binary" around computers. Many [programming languages](programming_language.md) have a [data type](data_type.md) called `boolean` or `bool` that allows represents just two values (*true* and *false*).

The very basic operations, or logic [functions](function.md), of Boolean algebra are:

- **NOT** (negation, `!`): Done with single bit, turns 1 into 0 and vice versa.
- **[AND](and.md)** (conjunction, `/\`): Done with two bits, yields 1 only if both input bits are 1, otherwise yields 0. This is similar to multiplication (1 * 1 = 1, 1 * 0 = 0, 0 * 1 = 0, 0 * 0 = 0) .
- **[OR](or.md)** (disjunction, `\/`): Done with two bits, yields 1 if at least one of the input bits is 1, otherwise yields 0. This is similar to addition (1 + 1 = 1, 1 + 0 = 1, 0 + 1 = 1, 0 + 0 = 0).

There are also other function such as [XOR](xor.md) (exclusive OR, is 1 exactly when the inputs differ) and negated versions of AND and OR (NAND and NOR, give opposite outputs of the respective non-negated function). The functions are summed up in the following table (we all these kinds of tables **truth tables**):

| x   | y   | NOT x | x AND y | x OR y | x XOR y | x NAND y | x NOR y | x NXOR y |
| --- | --- | ----- | ------- | ------ | ------- | -------- | ------- | -------- |
| 0   | 0   | 1     | 0       | 0      | 0       | 1        | 1       | 1        |
| 0   | 1   | 1     | 0       | 1      | 1       | 1        | 0       | 0        |
| 1   | 0   | 0     | 0       | 1      | 1       | 1        | 0       | 0        |
| 1   | 1   | 0     | 1       | 1      | 0       | 0        | 0       | 1        |

In fact there exists more functions with two inputs and one output (16 in total, computing this is left as exercise :]). However not all are named -- we only use special names for the commonly used ones, mostly the ones in the table above.

An interesting thing is that we may only need one or two of these functions to be able to create all other function (this is called *functional completeness*); for example it is enough to only have *AND* and *NOT* functions together to be able to construct all other functions. Functions *NAND* and *NOR* are each enough by themselves to make all the other functions! For example *NOT x = x NAND x*, *x AND y = NOT (x NAND y) = (x NAND y) NAND (x NAND y)*, *x OR y = (x NAND x) NAND (y NAND y)* etc.

Boolean algebra further tells us some basic laws we can use to simplify our expressions with these functions, for example:

- trivial laws:
  - *x AND 0 = 0*
  - *x OR 1 = 1*
  - *x AND 1 = x*
  - *x OR 0 = x*
  - *x AND x = x*
  - *x OR x = x*
  - commutativity of OR: *x OR y = y OR x*
  - commutativity of OR: *x AND y = y AND x*
  - associativity of AND: *x OR (x OR x) = (x OR x) OR x*
  - associativity of AND: *x AND (x AND x) = (x AND x) AND x*
  - ...
- distributive laws:
  - *x AND (y OR z) = (x AND y) OR (x AND z)*
  - *x OR (y AND z) = (x OR y) AND (x OR z)*
- De Morgan's laws:
  - NOT (x AND y) = NOT(x) OR NOT(y)
  - NOT (x OR y) = NOT(x) AND NOT(y)
- ...

By combining all of these simple functions it is possible to construct not only operations with whole numbers and traditional algebra, but also a whole computer that renders 3D graphics and sends multimedia over the Internet. For more details see **[logic circuits](logic_circuit.md)**.

## Base-2 Numeral System

While we may use a single bit to represent two values, we can group more bits together and become able to represent more values; the more bits we group together, the more values we'll be able to represent as possible combinations of the values of individual bits. The number of bits, or "places" we have for writing a binary number is called a number of bits or **bit width**. A bit width *N* allows for storing 2^*N* values -- e.g. with 2 bits we can store 2^2 = 4 values: 0, 1, 2 and 3, in binary 00, 01, 10 and 11. With 3 bits we can store 2^3 = 8 values: 0 to 7, in binary 000, 001, 010, 011, 100, 101, 110, 111. And so on.

At the basic level binary works just like the [decimal](decimal.md) (base 10) system we're used to. While the decimal system uses powers of 10, binary uses powers of 2. Here is a table showing a few numbers in decimal and binary:

| decimal | binary |
| ------- | ------ |
| 0       | 0      |
| 1       | 1      |
| 2       | 10     |
| 3       | 11     |
| 4       | 100    |
| 5       | 101    |
| 6       | 110    |
| 7       | 111    |
| 8       | 1000   |
| ...     | ...    |

**Conversion to decimal**: let's see an example that utilizes the facts mentioned above. Let's have a number that's written as 10135 in decimal. The first digit from the right (5) says the number of 10^(0)s (1s) in the number, the second digit (3) says the number of 10^(1)s (10s), the third digit (1) says the number of 10^(2)s (100s) etc. Similarly if we now have a number **100101** in binary, the first digit from the right (1) says the number of 2^(0)s (1s), the second digit (0) says the number of 2^(1)s (2s), the third digit (1) says the number of 2^(2)s (4s) etc. Therefore this binary number can be converted to decimal by simply computing 1 * 2^0 + 0 * 2^1 + 1 * 2^2 + 0 * 2^3 + 0 * 2^4 + 1 * 2^5 = 1 + 4 + 32 = **37**.

```
100101 = 1 + 4 + 32 = 37
||||||
\\\\\\__number of 2^0s (= 1s)
 \\\\\__number of 2^1s (= 2s)
  \\\\__number of 2^2s (= 4s)
   \\\__number of 2^3s (= 8s)
    \\__number of 2^4s (= 16s)
     \__number of 2^5s (= 32s)
```

To **convert from decimal** to binary we can use a simple [algorithm](algorithm.md) that's again derived from the above. Let's say we have a number *X* we want to write in binary. We will write digits from right to left. The first (rightmost) digit is the remainder after integer division of *X* by 2. Then we divide the number by 2. The second digit is again the remainder after division by 2. Then we divide the number by 2 again. This continues until the number is 0. For example let's convert the number 22 to binary: first digit = 22 % 2 = **0**; 22 / 2 = 11, second digit = 11 % 2 = **1**; 11 / 2 = 5; third digit = 5 % 2 = **1**; 5 / 2 = 2; 2 % 2 = **0**; 2 / 2 = 1; 1 % 2 = **1**; 1 / 2 = 0. The result is **10110**.

NOTE: once we start grouping bits to create numbers, we typically still also keep the possibility to apply the basic Boolean operations to these bits. You will sometimes encounter the term **bitwise** operation which signifies an operation that works on the level of single bits by applying given function to bits that correspond by their position; for example a bitwise AND of values `1010` and `1100` will give `1000`.

**Operations with binary numbers**: again, just as we can do arithmetic with decimal numbers, we can do the same with binary numbers, even the [algorithms](algorithm.md) we use to perform these operations with pen and paper work basically the same. For example the following shows multiplication of `110` (6) by `11` (3) to get `10010` (18):

```
  110 *
   11
  ___
  110
 110
 ____
10010
```

All of these operations can be implemented just using the basic boolean functions -- see [logic circuits](logic_circuit.md) and [CPUs](cpu.md).

In binary it is very simple and fast to divide and multiply by powers of 2 (1, 2, 4, 8, 16, ...), just as it is simply to divide and multiple by powers of 10 (1, 10, 100, 1000, ...) in decimal (we just shift the radix point, e.g. the binary number 1011 multiplied by 4 is 101100, we just added two zeros at the end). This is why as a programmer **you should prefer working with powers of two** (your programs can be faster if the computer can perform basic operations faster).

**Binary can be very easily converted to and from [hexadecimal](hexadeciaml.md) and [octal](octal.md)** because 1 hexadecimal (octal) digit always maps to exactly 4 (3) binary digits. E.g. the hexadeciaml number F0 is 11110000 in binary (1111 is always equaivalent to F, 0000 is always equivalent to 0). This doesn't hold for the decimal base, hence programmers often tend to avoid base 10.

We can work with the binary representation the same way as with decimal, i.e. we can e.g. write negative numbers such as -110101 or [rational numbers](rational_number.md) (or even [real numbers](real_number.md)) such as 1011.001101. However in a computer memory there are no other symbols than 1 and 0, so we can't use extra symbols such as *-* or *.* to represent such values. So if we want to represent more numbers than non-negative integers, we literally have to only use 1s and 0s and choose a specific **representation**/**format**/encoding of numbers -- there are several formats for representing e.g. [signed](signed.md) (potentially negative) or rational (fractional) numbers, each with pros and cons. The following are the most common number representations:

- **[two's complement](twos_complement.md)**: Allows storing integers, both positive, negative and zero. It is **probably the most common representation** of integers because of its great advantages: basic operations (+, -, *) are performed exactly the same as with "normal" binary numbers, and there is no negative zero (which would be an inconvenience and waste of memory). Inverting a number (from negative to positive and vice versa) is done simply by inverting all the bits and adding 1. The leftmost bit signifies the number's sign (0 = +, 1 = -).
- **[sign-magnitude](sign_magnitude.md)**: Allows storing integers, both positive, negative and zero. It's pretty straightforward: the leftmost bit in a number serves as a sign (0 means +, 1 means -) and the rest of the number is the distance from zero in "normal" representation. So e.g. a 4 bit number 0011 is 3 while 1011 is -3 (note that we have to know the bit width of the number here, e.g. on 8 bits -3 would be 10000011). The disadvantage is there are two values for zero (positive, 0000 and [negative](negative_zero.md), 1000) which wastes a value and presents a computational inconvenience, and operations with these numbers are more complicated and slower (checking the sign requires extra code).
- **[one's complement](ones_complement.md)**: Allows storing integers, both positive, negative and zero. The leftmost bit signifies a sign, in the same way as with sign-magnitude, but numbers are inverted differently: a positive number is turned into negative (and vice versa) by inverting all bits. So e.g. 0011 is 3 while 1100 is -3 (again, bit width matters). The disadvantage is there are two values for zero (positive, 0000 and [negative](negative_zero.md), 1111) which wastes a value and presents a computational inconvenience, and some operations with these numbers may be more complex.
- **[fixed point](fixed_point.md)**: Allows storing [rational numbers](rational_number.md) (fractions), i.e. numbers with a radix point (such as 1101.011), which can also be positive, negative or zero. It works by imagining a radix point at some fixed position in the binary representation, e.g. if we have an 8 bit number, we may consider 5 leftmost bits to represent the whole part and 3 rightmost bits to be the fractional part (so e.g the number 11010110 represents 11010.110). The advantage here is extreme simplicity (we can use normal integer numbers as fixed point simply by imagining a radix point). The disadvantage may be low precision and small range of representable values.
- **[floating point](float.md)**: Allows storing [rational numbers](rational_number.md) in great ranges, both positive, negative and zero, plus some additional values such as [infinity](infinity.md) and *[not a number](nan.md)*. It allows the radix point to be shifted which gives a potential for storing extremely big and extremely small numbers at the same time. The disadvantage is that float is extremely complex, [bloated](bloat.md), wastes some values and for fast execution requires a special hardware unit (which most "normal" computers nowadays have, but are missing e.g. in some [embedded systems](embedded.md)).
- ...

As anything can be represented with numbers, binary can be used to store any kind of information such as text, images, sounds and videos. See [data structures](data_structure.md) and [file formats](file_format.md).

**Binary numbers can nicely encode [sets](set.md)**: one binary number can be seen as representing a set, with each bit saying whether an object is or is not present. For example an 8 bit number can represent a set of whole numbers 0 to 7. Consider e.g. a value *S1 = 10000101* and *S2 = 01001110*; *S1* represents a set { 0, 2, 7 }, *S2* represents a set { 1, 2, 3, 6 }. This is natural and convenient, no bits are wasted on encoding order of numbers, only their presence or absence is encoded, and many set operations are trivial and very fast. For example the basic operations on sets, i.e. union, intersection, complement are simply performed with boolean operators [OR](or.md), [AND](and.md) and [NOT](not.md). Also checking membership, adding or removing numbers to the set etc. are very simple (left as an exercise for the reader lol; also another exercise -- in a similar fashion, how would you encode a [multiset](multiset.md)?). This is actually very useful and commonly used, for example [chess](chess.md) engines often use 64 bit numbers to represent sets of squares on a chessboard.

## See Also

- [unary](unary.md)
- [ternary](ternary.md)
- [logic circuit](logic_circuit.md)
- [bit](bit.md)
- [hexadecimal](hexadeciaml.md)
- [De Morgan's laws](de_morgans_laws.md)
- [data structure](data_structure.md)
- [data type](data_type.md)