1 #ifndef _LINUX_SUSPEND_H
2 #define _LINUX_SUSPEND_H
4 #include <linux/swap.h>
5 #include <linux/notifier.h>
6 #include <linux/init.h>
11 #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
12 extern void pm_set_vt_switch(int);
13 extern int pm_prepare_console(void);
14 extern void pm_restore_console(void);
16 static inline void pm_set_vt_switch(int do_switch
)
20 static inline int pm_prepare_console(void)
25 static inline void pm_restore_console(void)
30 typedef int __bitwise suspend_state_t
;
32 #define PM_SUSPEND_ON ((__force suspend_state_t) 0)
33 #define PM_SUSPEND_STANDBY ((__force suspend_state_t) 1)
34 #define PM_SUSPEND_MEM ((__force suspend_state_t) 3)
35 #define PM_SUSPEND_MAX ((__force suspend_state_t) 4)
38 * struct platform_suspend_ops - Callbacks for managing platform dependent
39 * system sleep states.
41 * @valid: Callback to determine if given system sleep state is supported by
43 * Valid (ie. supported) states are advertised in /sys/power/state. Note
44 * that it still may be impossible to enter given system sleep state if the
45 * conditions aren't right.
46 * There is the %suspend_valid_only_mem function available that can be
47 * assigned to this if the platform only supports mem sleep.
49 * @begin: Initialise a transition to given system sleep state.
50 * @begin() is executed right prior to suspending devices. The information
51 * conveyed to the platform code by @begin() should be disregarded by it as
52 * soon as @end() is executed. If @begin() fails (ie. returns nonzero),
53 * @prepare(), @enter() and @finish() will not be called by the PM core.
54 * This callback is optional. However, if it is implemented, the argument
55 * passed to @enter() is redundant and should be ignored.
57 * @prepare: Prepare the platform for entering the system sleep state indicated
59 * @prepare() is called right after devices have been suspended (ie. the
60 * appropriate .suspend() method has been executed for each device) and
61 * before device drivers' late suspend callbacks are executed. It returns
62 * 0 on success or a negative error code otherwise, in which case the
63 * system cannot enter the desired sleep state (@prepare_late(), @enter(),
64 * @wake(), and @finish() will not be called in that case).
66 * @prepare_late: Finish preparing the platform for entering the system sleep
67 * state indicated by @begin().
68 * @prepare_late is called before disabling nonboot CPUs and after
69 * device drivers' late suspend callbacks have been executed. It returns
70 * 0 on success or a negative error code otherwise, in which case the
71 * system cannot enter the desired sleep state (@enter() and @wake()).
73 * @enter: Enter the system sleep state indicated by @begin() or represented by
74 * the argument if @begin() is not implemented.
75 * This callback is mandatory. It returns 0 on success or a negative
76 * error code otherwise, in which case the system cannot enter the desired
79 * @wake: Called when the system has just left a sleep state, right after
80 * the nonboot CPUs have been enabled and before device drivers' early
81 * resume callbacks are executed.
82 * This callback is optional, but should be implemented by the platforms
83 * that implement @prepare_late(). If implemented, it is always called
84 * after @enter(), even if @enter() fails.
86 * @finish: Finish wake-up of the platform.
87 * @finish is called right prior to calling device drivers' regular suspend
89 * This callback is optional, but should be implemented by the platforms
90 * that implement @prepare(). If implemented, it is always called after
91 * @enter() and @wake(), if implemented, even if any of them fails.
93 * @end: Called by the PM core right after resuming devices, to indicate to
94 * the platform that the system has returned to the working state or
95 * the transition to the sleep state has been aborted.
96 * This callback is optional, but should be implemented by the platforms
97 * that implement @begin(). Accordingly, platforms implementing @begin()
98 * should also provide a @end() which cleans up transitions aborted before
101 * @recover: Recover the platform from a suspend failure.
102 * Called by the PM core if the suspending of devices fails.
103 * This callback is optional and should only be implemented by platforms
104 * which require special recovery actions in that situation.
106 struct platform_suspend_ops
{
107 int (*valid
)(suspend_state_t state
);
108 int (*begin
)(suspend_state_t state
);
109 int (*prepare
)(void);
110 int (*prepare_late
)(void);
111 int (*enter
)(suspend_state_t state
);
113 void (*finish
)(void);
115 void (*recover
)(void);
118 #ifdef CONFIG_SUSPEND
120 * suspend_set_ops - set platform dependent suspend operations
121 * @ops: The new suspend operations to set.
123 extern void suspend_set_ops(struct platform_suspend_ops
*ops
);
124 extern int suspend_valid_only_mem(suspend_state_t state
);
127 * arch_suspend_disable_irqs - disable IRQs for suspend
129 * Disables IRQs (in the default case). This is a weak symbol in the common
130 * code and thus allows architectures to override it if more needs to be
131 * done. Not called for suspend to disk.
133 extern void arch_suspend_disable_irqs(void);
136 * arch_suspend_enable_irqs - enable IRQs after suspend
138 * Enables IRQs (in the default case). This is a weak symbol in the common
139 * code and thus allows architectures to override it if more needs to be
140 * done. Not called for suspend to disk.
142 extern void arch_suspend_enable_irqs(void);
144 extern int pm_suspend(suspend_state_t state
);
145 #else /* !CONFIG_SUSPEND */
146 #define suspend_valid_only_mem NULL
148 static inline void suspend_set_ops(struct platform_suspend_ops
*ops
) {}
149 static inline int pm_suspend(suspend_state_t state
) { return -ENOSYS
; }
150 #endif /* !CONFIG_SUSPEND */
152 /* struct pbe is used for creating lists of pages that should be restored
153 * atomically during the resume from disk, because the page frames they have
154 * occupied before the suspend are in use.
157 void *address
; /* address of the copy */
158 void *orig_address
; /* original address of a page */
162 /* mm/page_alloc.c */
163 extern void mark_free_pages(struct zone
*zone
);
166 * struct platform_hibernation_ops - hibernation platform support
168 * The methods in this structure allow a platform to carry out special
169 * operations required by it during a hibernation transition.
171 * All the methods below, except for @recover(), must be implemented.
173 * @begin: Tell the platform driver that we're starting hibernation.
174 * Called right after shrinking memory and before freezing devices.
176 * @end: Called by the PM core right after resuming devices, to indicate to
177 * the platform that the system has returned to the working state.
179 * @pre_snapshot: Prepare the platform for creating the hibernation image.
180 * Called right after devices have been frozen and before the nonboot
181 * CPUs are disabled (runs with IRQs on).
183 * @finish: Restore the previous state of the platform after the hibernation
184 * image has been created *or* put the platform into the normal operation
185 * mode after the hibernation (the same method is executed in both cases).
186 * Called right after the nonboot CPUs have been enabled and before
187 * thawing devices (runs with IRQs on).
189 * @prepare: Prepare the platform for entering the low power state.
190 * Called right after the hibernation image has been saved and before
191 * devices are prepared for entering the low power state.
193 * @enter: Put the system into the low power state after the hibernation image
194 * has been saved to disk.
195 * Called after the nonboot CPUs have been disabled and all of the low
196 * level devices have been shut down (runs with IRQs off).
198 * @leave: Perform the first stage of the cleanup after the system sleep state
199 * indicated by @set_target() has been left.
200 * Called right after the control has been passed from the boot kernel to
201 * the image kernel, before the nonboot CPUs are enabled and before devices
202 * are resumed. Executed with interrupts disabled.
204 * @pre_restore: Prepare system for the restoration from a hibernation image.
205 * Called right after devices have been frozen and before the nonboot
206 * CPUs are disabled (runs with IRQs on).
208 * @restore_cleanup: Clean up after a failing image restoration.
209 * Called right after the nonboot CPUs have been enabled and before
210 * thawing devices (runs with IRQs on).
212 * @recover: Recover the platform from a failure to suspend devices.
213 * Called by the PM core if the suspending of devices during hibernation
214 * fails. This callback is optional and should only be implemented by
215 * platforms which require special recovery actions in that situation.
217 struct platform_hibernation_ops
{
220 int (*pre_snapshot
)(void);
221 void (*finish
)(void);
222 int (*prepare
)(void);
225 int (*pre_restore
)(void);
226 void (*restore_cleanup
)(void);
227 void (*recover
)(void);
230 #ifdef CONFIG_HIBERNATION
231 /* kernel/power/snapshot.c */
232 extern void __register_nosave_region(unsigned long b
, unsigned long e
, int km
);
233 static inline void __init
register_nosave_region(unsigned long b
, unsigned long e
)
235 __register_nosave_region(b
, e
, 0);
237 static inline void __init
register_nosave_region_late(unsigned long b
, unsigned long e
)
239 __register_nosave_region(b
, e
, 1);
241 extern int swsusp_page_is_forbidden(struct page
*);
242 extern void swsusp_set_page_free(struct page
*);
243 extern void swsusp_unset_page_free(struct page
*);
244 extern unsigned long get_safe_page(gfp_t gfp_mask
);
246 extern void hibernation_set_ops(struct platform_hibernation_ops
*ops
);
247 extern int hibernate(void);
248 extern int hibernate_nvs_register(unsigned long start
, unsigned long size
);
249 extern int hibernate_nvs_alloc(void);
250 extern void hibernate_nvs_free(void);
251 extern void hibernate_nvs_save(void);
252 extern void hibernate_nvs_restore(void);
253 extern bool system_entering_hibernation(void);
254 #else /* CONFIG_HIBERNATION */
255 static inline int swsusp_page_is_forbidden(struct page
*p
) { return 0; }
256 static inline void swsusp_set_page_free(struct page
*p
) {}
257 static inline void swsusp_unset_page_free(struct page
*p
) {}
259 static inline void hibernation_set_ops(struct platform_hibernation_ops
*ops
) {}
260 static inline int hibernate(void) { return -ENOSYS
; }
261 static inline int hibernate_nvs_register(unsigned long a
, unsigned long b
)
265 static inline int hibernate_nvs_alloc(void) { return 0; }
266 static inline void hibernate_nvs_free(void) {}
267 static inline void hibernate_nvs_save(void) {}
268 static inline void hibernate_nvs_restore(void) {}
269 static inline bool system_entering_hibernation(void) { return false; }
270 #endif /* CONFIG_HIBERNATION */
272 #ifdef CONFIG_PM_SLEEP
273 void save_processor_state(void);
274 void restore_processor_state(void);
276 /* kernel/power/main.c */
277 extern int register_pm_notifier(struct notifier_block
*nb
);
278 extern int unregister_pm_notifier(struct notifier_block
*nb
);
280 #define pm_notifier(fn, pri) { \
281 static struct notifier_block fn##_nb = \
282 { .notifier_call = fn, .priority = pri }; \
283 register_pm_notifier(&fn##_nb); \
285 #else /* !CONFIG_PM_SLEEP */
287 static inline int register_pm_notifier(struct notifier_block
*nb
)
292 static inline int unregister_pm_notifier(struct notifier_block
*nb
)
297 #define pm_notifier(fn, pri) do { (void)(fn); } while (0)
298 #endif /* !CONFIG_PM_SLEEP */
300 #ifndef CONFIG_HIBERNATION
301 static inline void register_nosave_region(unsigned long b
, unsigned long e
)
304 static inline void register_nosave_region_late(unsigned long b
, unsigned long e
)
309 extern struct mutex pm_mutex
;
311 #endif /* _LINUX_SUSPEND_H */